RESUMEN

This study investigated the influence of Konjac Glucomannan (KGM) with varying degrees of polymerization (DKGMx) on the gelatinization and retrogradation characteristics of wheat starch, providing new insights into starch-polysaccharide interactions. This research uniquely focuses on the effects of DKGMx, utilizing multidisciplinary approaches including Rapid Visco Analysis (RVA), Differential Scanning Calorimetry (DSC), rheological testing, Low-Field Nuclear Magnetic Resonance (LF-NMR), and molecular simulations to assess the effects of DKGMx on gelatinization temperature, viscosity, structural changes post-retrogradation, and molecular interactions. Our findings revealed that higher degrees of polymerization (DP) of DKGMx significantly enhanced starch's pasting viscosity and stability, whereas lower DP reduced viscosity and interfered with retrogradation. High DP DKGMx promoted retrogradation by modifying moisture distribution. Molecular simulations revealed the interplay between low DP DKGMx and starch molecules. These interactions, characterized by increased hydrogen bonds and tighter binding to more starch chains, inhibited starch molecular rearrangement. Specifically, low DP DKGMx established a dense hydrogen bond network with starch, significantly restricting molecular mobility and rearrangement. This study provides new insights into the role of the DP of DKGMx in modulating wheat starch's properties, offering valuable implications for the functional improvement of starch-based foods and advancing starch science.

Asunto(s)

Mananos , Polimerizacion , Almidón , Triticum , Triticum/química , Almidón/química , Viscosidad , Mananos/química , Enlace de Hidrógeno , Reología , Simulación de Dinámica Molecular , Rastreo Diferencial de Calorimetría

RESUMEN

This study aimed to assess the formation of nevirapine (NVP) co-amorphs systems (CAM) with different co-formers (lamivudine-3TC, citric acid-CAc, and urea) through combined screening techniques as computational and thermal studies, solubility studies; in addition to develop and characterize suitable NVP-CAM. NVP-CAM were obtained using the quench-cooling method, and characterized by differential scanning calorimetry (DSC), X-ray diffractometry (XRD), Fourier Transform Infrared Spectroscopy (FTIR), and polarized light microscopy (PLM), in addition to in vitro dissolution in pH 6.8. The screening results indicated intermolecular interactions occurring between NVP and 3TC; NVP and CAc, where shifts in the melting temperature of NVP were verified. The presence of CAc impacted the NVP equilibrium solubility, due to hydrogen bonds. DSC thermograms evidenced the reduction and shifting of the endothermic peaks of NVP in the presence of its co-formers, suggesting partial miscibility of the compounds. Amorphization was proven by XRD and PLM assays. In vitro dissolution study exhibited a significant increase in solubility and dissolution efficiency of NVP-CAM compared to free NVP. Combined use of screening studies was useful for the development of stable and amorphous NVP-CAM, with increased NVP solubility, making CAM promising systems for combined antiretroviral therapy.

Asunto(s)

Rastreo Diferencial de Calorimetría , Química Farmacéutica , Nevirapina , Solubilidad , Difracción de Rayos X , Nevirapina/química , Rastreo Diferencial de Calorimetría/métodos , Difracción de Rayos X/métodos , Química Farmacéutica/métodos , Espectroscopía Infrarroja por Transformada de Fourier/métodos , Composición de Medicamentos/métodos , Lamivudine/química , Enlace de Hidrógeno , Fármacos Anti-VIH/química

RESUMEN

By performing differential scanning calorimetry(DSC) measurements on RNase A, we studied the stabilization provided by the addition of potassium aspartate(KAsp) or potassium glutamate (KGlu) and found that it leads to a significant increase in the denaturation temperature of the protein. The stabilization proves to be mainly entropic in origin. A counteraction of the stabilization provided by KAsp or KGlu is obtained by adding common denaturants such as urea, guanidinium chloride, or guanidinium thiocyanate. A rationalization of the experimental data is devised on the basis of a theoretical approach developed by one of the authors. The main contribution to the conformational stability of globular proteins comes from the gain in translational entropy of water and co-solute ions and/or molecules for the decrease in solvent-excluded volume associated with polypeptide folding (i.e., there is a large decrease in solvent-accessible surface area). The magnitude of this entropic contribution increases with the number density and volume packing density of the solution. The two destabilizing contributions come from the conformational entropy of the chain, which should not depend significantly on the presence of co-solutes, and from the direct energetic interactions between co-solutes and the protein surface in both the native and denatured states. It is the magnitude of the latter that discriminates between stabilizing and destabilizing agents.

Asunto(s)

Ácido Aspártico , Ácido Glutámico , Desnaturalización Proteica , Ácido Aspártico/química , Desnaturalización Proteica/efectos de los fármacos , Ácido Glutámico/química , Ribonucleasa Pancreática/química , Ribonucleasa Pancreática/metabolismo , Termodinámica , Rastreo Diferencial de Calorimetría , Entropía , Estabilidad Proteica , Guanidina/química , Guanidina/farmacología , Urea/química , Urea/farmacología , Conformación Proteica

RESUMEN

Emulsions stabilized via Pickering particles are becoming more and more popular due to their high stability and biocompatibility. Hence, developing new ways to produce effective Pickering particles is essential. In this work, we present a crystal engineering approach to obtain precise control over particle properties such as size, shape, and crystal structure, which may affect wettability and surface chemistry. A highly reproducible synthesis method via anti-solvent crystallization was developed to produce sub-micron sized curcumin crystals of the metastable form III, to be used as Pickering stabilizers. The produced crystals presented a clear hydrophobic nature, which was demonstrated by their preference to stabilize water-in-oil (W/O) emulsions. A comprehensive experimental and computational characterization of curcumin crystals was performed to rationalize their hydrophobic nature. Analytical techniques including Raman spectroscopy, powder X-ray diffraction (PXRD), Solid-State Nuclear Magnetic Resonance (SSNMR), scanning electron microscopy (SEM), Differential Scanning Calorimetry (DSC), confocal fluorescence microscopy and contact angle measurements were used to characterize curcumin particles in terms of shape, size and interfacial activity. The attachment energy model was instead applied to study relevant surface features of curcumin crystals, such as topology and facet-specific surface chemistry. This work contributes to the understanding of the effect of crystal properties on the mechanism of Pickering stabilization, and paves the way for the formulation of innovative products in fields ranging from pharmaceuticals to food science.

Asunto(s)

Cristalización , Curcumina , Emulsiones , Interacciones Hidrofóbicas e Hidrofílicas , Tamaño de la Partícula , Curcumina/química , Emulsiones/química , Difracción de Rayos X , Microscopía Electrónica de Rastreo , Espectrometría Raman , Rastreo Diferencial de Calorimetría , Humectabilidad , Propiedades de Superficie , Agua/química , Espectroscopía de Resonancia Magnética

RESUMEN

Eco-friendly materials like carbohydrate-based polymers are important for a sustainable future. Starch is particularly promising because of its biodegradability and abundance but its processing to thermoplastic starch requires optimization. Here we developed thermoplastic maize starch materials based on three manufacturing protocols, namely: (1) starch/glycerol manual mixing and extrusion, (2) starch/glycerol manual mixing, extrusion, and kneading, (3) starch/glycerol/water manual mixing and kneading. The physical properties were investigated by differential scanning calorimetry, thermogravimetric analysis, and broadband dielectric spectroscopy. As expected from a partially miscible blend, the dielectric spectra revealed two distinct α-relaxations for the glycerol-rich and the starch-rich phases, respectively. By employing kneading after extrusion, the miscibility between the two phases was found to improve based on thermal and dielectric methods. Moreover, the addition of water during the premixing stage was observed to facilitate phase separation between starch and glycerol, with the α-relaxation dynamics of the latter being comparable to pure glycerol.

Asunto(s)

Glicerol , Almidón , Zea mays , Almidón/química , Glicerol/química , Zea mays/química , Agua/química , Rastreo Diferencial de Calorimetría , Termogravimetría , Temperatura

RESUMEN

This study was designed to synthesize quarternized chitosans (Q-CS) and explore their potential application in aqueous solubility enhancement of indomethacin (IND), a BCS class-II drug. Three different Q-CS; N,N,N-trimethyl chitosan chloride (TMC), N-(4-N'-methylpyridinylmethyl) chitosan chloride (mPyCS), and N-(4-N',N',N'-trimethylaminobenzyl) chitosan chloride (TmBzCS) were synthesized and characterized through various spectroscopic analysis. Q-CS-based solid-dispersion (SD) composites of IND (Q-CS-IND) were prepared using the spray-drying method and characterized through Fourier transform infrared (FTIR), scanning electron microscopy (SEM), differential-scanning calorimetry (DSC), and powder X-ray diffraction (P-XRD). The solubility and dissolution profiles of SD-composites of IND were evaluated and compared with physical mixtures (PM). The IND contents were quantified and validated in the composites using UV-Vis spectrophotometer. FTIR and NMR analysis showed the successful preparation of Q-CS. TMC was found with the highest yield (55.13%) and mPyCS with the highest degree of quaternization (DQ) (63.37%). FT-IR analysis of IND-Q-CS composites demonstrated chemical interaction between carbonyl moieties of IND with functional groups of Q-CS. DSC and PXRD analyses demonstrated the transformation of IND in SD composites from crystalline to an amorphous form. All the IND-Q-CS composites were observed with a significant increase in the solubility and dissolution rate of the drug (1996.0 µg/min) compared to PM (1306.8 µg/min), which is higher than pure IND (791.6 µg/min). The contents of IND in TMC, mPyCS, and TmBzCS composites were 97.69-99.92%, 97.66-100.25%, and 97.18-100.11% respectively. Overall, the findings encourage the applications of Q-CS derivatives for increasing IND water solubility and warrant further in vivo biological profiling of IND composites.

Asunto(s)

Rastreo Diferencial de Calorimetría , Quitosano , Indometacina , Solubilidad , Indometacina/química , Quitosano/química , Espectroscopía Infrarroja por Transformada de Fourier/métodos , Rastreo Diferencial de Calorimetría/métodos , Difracción de Rayos X/métodos , Química Farmacéutica/métodos , Microscopía Electrónica de Rastreo/métodos

RESUMEN

The dissolution and bioavailability challenges posed by poorly water-soluble drugs continue to drive innovation in pharmaceutical formulation design. Nintedanib (NDNB) is a typical BCS class II drug that has been utilized to treat idiopathic pulmonary fibrosis (IPF). Due to the low solubility, its oral bioavailability is relatively low, limiting its therapeutical effectiveness. It is crucial to enhance the dissolution and the oral bioavailability of NDNB. In this study, we focused on the preparation of amorphous solid dispersions (ASD) using hot melt extrusion (HME). The formulation employed Kollidon® VA64 (VA64) as the polymer matrix, blended with the NDNB at a ratio of 9:1. HME was conducted at temperatures ranging from 80 °C to 220 °C. The successful preparation of ASD was confirmed through various tests including polarized light microscopy (PLM), X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FT-IR), and thermogravimetric analysis (TGA). The in-vitro cumulative release of NDNB-ASD in 2 h in a pH 6.8 medium was 8.3-fold higher than that of NDNB (p < 0.0001). In a pH 7.4 medium, it was 10 times higher (p < 0.0001). In the in-vivo pharmacokinetic experiments, the area under curve (AUC) of NDNB-ASD was 5.3-fold higher than that of NDNB and 2.2 times higher than that of commercially available soft capsules (Ofev®) (p < 0.0001). There was no recrystallization after 6 months under accelarated storage test. Our study indicated that NDNB-ASD can enhance the absorption of NDNB, thus providing a promising method to improve NDNB bioavailability in oral dosages.

Asunto(s)

Disponibilidad Biológica , Indoles , Solubilidad , Indoles/farmacocinética , Indoles/química , Indoles/administración & dosificación , Administración Oral , Animales , Química Farmacéutica/métodos , Rastreo Diferencial de Calorimetría/métodos , Difracción de Rayos X/métodos , Masculino , Espectroscopía Infrarroja por Transformada de Fourier/métodos , Composición de Medicamentos/métodos , Conejos , Polímeros/química , Tecnología de Extrusión de Fusión en Caliente/métodos , Liberación de Fármacos

RESUMEN

By introducing disordered molecules into a crystal structure, the motion of the disordered molecules easily induces the formation of multidimensional frameworks in functional crystal materials, allowing for structural phase transitions and the realization of various dielectric properties within a certain temperature range. Here, we prepared a novel ionic complex [C7H8N3]3[Fe(NCS)6]·H2O (1) between 2-aminobenzimidazole and ferric isothiocyanate from ferric chloride hexahydrate, ammonium thiocyanate, and 2-aminobenzimidazole using the evaporation of the solvent method. The main components, the single-crystal structure, and the thermal and dielectric properties of the complex were characterized using infrared spectroscopy, elemental analysis, single-crystal X-ray diffraction, powder XRD, thermogravimetric analysis, differential scanning calorimetry, variable-temperature and variable-frequency dielectric constant tests, etc. The analysis results indicated that compound 1 belongs to the P21/n space group. Within the crystal structure, the [Fe(NCS)6]3- anion formed a two-dimensional hydrogen-bonded network with the organic cation through S···S interactions and hydrogen bonding. The disorder-order motion of the anions and cations within the crystal and the deformation of the crystal frameworks lead to a significant reversible isostructural phase transition and multiaxial dielectric anomalies of compound 1 at approximately 240 K.

Asunto(s)

Bencimidazoles , Transición de Fase , Tiocianatos , Tiocianatos/química , Bencimidazoles/química , Cristalografía por Rayos X , Hierro/química , Enlace de Hidrógeno , Modelos Moleculares , Rastreo Diferencial de Calorimetría , Termogravimetría , Difracción de Rayos X

RESUMEN

Cassava starch solid biopolymer electrolyte (SBPE) films were prepared by a thermochemical method with different concentrations of lithium triflate (LiTFT) as a dopant salt. The process began with dispersing cassava starch in water, followed by heating to facilitate gelatinization; subsequently, plasticizers and LiTFT were added at differing concentrations. The infrared spectroscopy analysis (FTIR-ATR) showed variations in the wavenumber of some characteristic bands of starch, thus evidencing the interaction between the LiTFT salt and biopolymeric matrix. The short-range crystallinity index, determined by the ratio of COH to COC bands, exhibited the highest crystallinity in the salt-free SBPEs and the lowest in the SBPEs with a concentration ratio (Xm) of 0.17. The thermogravimetric analysis demonstrated that the salt addition increased the dehydration process temperature by 5 °C. Additionally, the thermal decomposition processes were shown at lower temperatures after the addition of the LiTFT salt into the SBPEs. The differential scanning calorimetry showed that the addition of the salt affected the endothermic process related to the degradation of the packing of the starch molecules, which occurred at 70 °C in the salt-free SBPEs and at lower temperatures (2 or 3 °C less) in the films that contained the LiTFT salt at different concentrations. The cyclic voltammetry analysis of the SBPE films identified the redox processes of the glucose units in all the samples, with observed differences in peak potentials (Ep) and peak currents (Ip) across various salt concentrations. Electrochemical impedance spectroscopy was used to establish the equivalent circuit model Rf-(Cdl/(Rct-(CPE/Rre))) and determine the electrochemical parameters, revealing a higher conduction value of 2.72 × 10-3 S cm-1 for the SBPEs with Xm = 17 and a lower conduction of 5.80 × 10-4 S cm-1 in the salt-free SBPEs. It was concluded that the concentration of LiTFT salt in the cassava starch SBPE films influences their morphology and slightly reduces their thermal stability. Furthermore, the electrochemical behavior is affected in terms of variations in the redox potentials of the glucose units of the biopolymer and in their ionic conductivity.

Asunto(s)

Conductividad Eléctrica , Electrólitos , Manihot , Almidón , Almidón/química , Manihot/química , Electrólitos/química , Termogravimetría , Biopolímeros/química , Mesilatos/química , Espectroscopía Infrarroja por Transformada de Fourier , Temperatura , Rastreo Diferencial de Calorimetría

RESUMEN

This study investigates the impact of 2-methyl imidazolium dihydrogen phosphate (2-MIDHP) on monoclonal antibody (mAb) aggregation during the Protein A purification stage, at a low pH (pH 3.0), and the viral inactivation phase. Size-exclusion high-performance liquid chromatography (SE-HPLC) and dynamic light scattering (DLS) were used to assess the mAb aggregation. Additionally, the influence of 2-MIDHP on mAb recovery, host cell protein (HCP) clearance, and Protein A leaching was investigated. Thermal stability of mAb, eluted in buffers containing 5 % to 25 % 2-MIDHP was analysed, using differential scanning calorimetry (DSC). Structural insights were obtained via circular dichroism (CD) and fluorescence spectroscopy. Our findings indicated that 2-MIDHP exerted a concentration-dependent protective effect against mAb aggregation, at the pH of 3.0. As the concentration of 2-MIDHP was increased from 0 % to 25 %, the aggregation was significantly reduced from 3.8 ± 0.01 % to 0.56 ± 0.002 %, as analysed by SE-HPLC. Addition of 2-MIDHP did not significantly impact the mAb recovery, HCP clearance, or Protein A leaching. DSC data supported these results, with higher 2-MIDHP concentrations leading to increased melting temperatures of mAb. CD and fluorescence spectroscopy revealed no significant changes in the secondary structure or aromatic residue environment in 2-MIDHP-treated samples, despite the observed reduction in aggregation. The results suggested that 2-MIDHP mitigated mAb aggregation during Protein A purification, possibly by stabilizing the protein structure under acidic stress conditions. These findings offer valuable insights for improving the robustness of mAb purification processes, enhancing product quality and yield.

Asunto(s)

Anticuerpos Monoclonales , Imidazoles , Estabilidad Proteica , Proteína Estafilocócica A , Anticuerpos Monoclonales/química , Anticuerpos Monoclonales/aislamiento & purificación , Imidazoles/química , Proteína Estafilocócica A/química , Animales , Cromatografía Líquida de Alta Presión/métodos , Concentración de Iones de Hidrógeno , Células CHO , Cricetulus , Dicroismo Circular , Cromatografía en Gel/métodos , Cromatografía de Afinidad/métodos , Rastreo Diferencial de Calorimetría , Espectrometría de Fluorescencia , Agregado de Proteínas

RESUMEN

Nucleic acid duplexes are typically analyzed in non-denaturing conditions. Melting temperature (Tm) is the property used to measure duplex stability; however, it is not known how the chromatographic conditions and mobile phase composition affect the duplex stability. We employed differential scanning calorimetry (DSC) method to measure the melting temperature of chemically modified silencing RNA duplex (21 base pairs, 0.15 mM duplex concentration) in mobile phases commonly used in reversed-phase, ion-pair reversed-phase, size exclusion and hydrophilic interaction chromatography. We investigated mobile phases consisting of ammonium acetate, alkylammonium ion-pairing reagents, alkali-ion chlorides, magnesium chloride, and additives including methanol, ethanol, acetonitrile and hexafluoroisopropanol. Increasing buffer concentration enhanced the duplex stability (Tm was 67.1 - 78.2 °C for 10-100 mM [Na+] concentration). The melting temperature decreases with the increase in cation size (70.2 °C in 10 mM [Li+], 68.1 °C in 10 mM [NH4+], 65.6 °C in 10 mM [Cs+], and 56.6 °C in 10 mM [triethylammonium+] solutions). Inclusion of 20 % of organic solvent in buffer reduced the melting temperature by 1-3 °C, and denaturation power increases in the order MeOH

Asunto(s)

Rastreo Diferencial de Calorimetría , ARN Interferente Pequeño , ARN Interferente Pequeño/química , Estabilidad del ARN , Cromatografía de Fase Inversa/métodos , Acetonitrilos/química , Acetatos/química , Metanol/química , Interacciones Hidrofóbicas e Hidrofílicas , Solventes/química , Propanoles/química , Cromatografía Liquida/métodos , Etanol/química , Temperatura de Transición , Cromatografía en Gel/métodos , Cloruro de Magnesio/química , Hidrocarburos Fluorados

RESUMEN

In this study, tissue scaffolds mimicking hierarchical morphology are constructed and proposed for bone augmentation. The scaffolds are fabricated using lyophilization, before coating them with collagen (Col). Subsequently, the Col-coated scaffolds undergo a second lyophilization, followed by silk fibroin (SF) coating, and a third lyophilization. Thereafter, the scaffolds are divided into six groups with varying ratios of Col to SF: Col/SF = 7:3, 5:5, 3:7, 10:0, and 0:10, with an SF scaffold serving as the control group. The scaffold morphology is examined using a scanning electron microscope, while molecular and structural formations are characterized by Fourier transform infrared spectrometer and differential scanning calorimeter, respectively. Physical and mechanical properties including swelling and compression are tested. Biological functions are assessed throughin vitroosteoblast cell culturing. Biomarkers indicative of bone formation-cell viability and proliferation, alkaline phosphatase activity, and calcium content-are analyzed. Results demonstrate that scaffolds coated with Col and SF exhibit sub-porous formations within the main pore. The molecular formation reveals interactions between the hydrophilic groups of Col and SF. The scaffold structure contains bound water and SF formation gets disrupted by Col. Physical and mechanical properties are influenced by the Col/SF ratio and morphology due to coating. The biological functions of scaffolds with Col and SF coating show enhanced potential for promoting bone tissue formation, particularly the Col/SF (7:3) ratio, which is most suitable for bone augmentation in small defect areas.

Asunto(s)

Materiales Biocompatibles , Proliferación Celular , Supervivencia Celular , Colágeno , Fibroínas , Ensayo de Materiales , Osteoblastos , Ingeniería de Tejidos , Andamios del Tejido , Andamios del Tejido/química , Fibroínas/química , Osteoblastos/citología , Animales , Ingeniería de Tejidos/métodos , Materiales Biocompatibles/química , Colágeno/química , Espectroscopía Infrarroja por Transformada de Fourier , Porosidad , Osteogénesis , Huesos , Microscopía Electrónica de Rastreo , Sustitutos de Huesos/química , Fosfatasa Alcalina/metabolismo , Cirugía Bucal/métodos , Rastreo Diferencial de Calorimetría , Ratones , Humanos , Línea Celular , Calcio/química , Calcio/metabolismo

RESUMEN

Melting of brain sphingomyelin (bSM) manifests as a broad feature in the DSC curve that encompasses the temperature range of 25 - 45 °C, with two distinguished maxima originating from the phase transitions of two the most abundant components: C24:1 (Tm,1) and C18:0 (Tm,2). While C24:1/C18:0 sphingomyelin transforms from the gel/ripple phase to the fluid/fluid phase, the dynamics of water molecules in the interfacial layer remain completely unknown. Therefore, we carried out a calorimetric (DSC), spectroscopic (temperature-dependent UV-Vis and fluorescence) and MD simulation study of bSM in the absence/presence of Laurdan® (bSM ± L) suspended in Britton-Robinson buffer with three different pH values, 4 (BRB4), 7 (BRB7) and 9 (BRB9), and of comparable ionic strength (I = 100 mM). According to DSC, T̅m, 1 (≈ 34.5 °C/≈ 32.1 °C) and T̅m, 2 (≈ 38.0 °C/≈ 37.2 °C) of bSM suspended in BRB4, BRB7, and BRB9 in the absence/presence of Laurdan® are found to be practically pH-independent. Turbidity-based data (UV-Vis) detected both qualitative and quantitative differences in the response of bSM suspended in BRB4/BRB7/BRB9 (T̅m: ∼ 35 °C/32.0 ± 0.2 °C/36.4 ± 0.4), suggesting an intricate interplay of weakening of van der Waals forces between their hydrocarbon chains and of increased hydration in the polar headgroups region during melting. The temperature-dependent response of Laurdan® reported a discontinuous, pH-dependent change in the reorientation of interfacial water molecules that coincides with the melting of C24:1 lipids (on average, T̅m (LTC/HTC): ≈ 31.8 °C/30.6 °C/30.5 °C). MD simulations elucidated the impact of Laurdan® on a change in the physicochemical properties of bSM lipids and characterized the hydrogen bond network at the interface at 20 °C and 50 °C.

Asunto(s)

Encéfalo , Simulación de Dinámica Molecular , Transición de Fase , Esfingomielinas , Agua , Esfingomielinas/química , Agua/química , Encéfalo/metabolismo , Rastreo Diferencial de Calorimetría , Concentración de Iones de Hidrógeno , Lauratos/química , 2-Naftilamina/análogos & derivados , 2-Naftilamina/química

RESUMEN

The discovery of a novel sphingolipid subclass, the (1-deoxy)sphingolipids, which lack the 1-hydroxy group, attracted considerable attention in the last decade, mainly due to their involvement in disease. They differed in their physico-chemical properties from the canonical (or 1-hydroxy) sphingolipids and they were more toxic when accumulated in cells, inducing neurodegeneration and other dysfunctions. (1-Deoxy)ceramides, (1-deoxy)dihydroceramides, and (1- deoxymethyl)dihydroceramides, the latter two containing a saturated sphingoid chain, have been studied in this work using differential scanning calorimetry, confocal fluorescence and atomic force microscopy, to evaluate their behavior in bilayers composed of mixtures of three or four lipids. When compared to canonical ceramides (Cer), a C16:0 (1-deoxy)Cer shows a lower miscibility in mixtures of the kind C16:0 sphingomyelin/cholesterol/XCer, where XCer is any (1-deoxy)ceramide, giving rise to the coexistence of a liquid-ordered phase and a gel phase. The latter resembles, in terms of thermotropic behavior and nanomechanical resistance, the gel phase of the C16:0 sphingomyelin/cholesterol/C16:0 Cer mixture [Busto et al., Biophys. J. 2014, 106, 621-630]. Differences are seen between the various C16:0 XCer under study in terms of nanomechanical resistance, bilayer thickness and bilayer topography. When examined in a more fluid environment (bilayers based on C24:1 SM), segregated gel phases are still present. Probably related to such lateral separation, XCer preserve the capacity for membrane permeation, but their effects are significantly lower than those of canonical ceramides. Moreover, C24:1 XCer show significantly lower membrane permeation capacity than their C16:0 counterparts. The above data may be relevant in the pathogenesis of certain sphingolipid-related diseases, including certain neuropathies, diabetes, and glycogen storage diseases.

Asunto(s)

Rastreo Diferencial de Calorimetría , Ceramidas , Colesterol , Membrana Dobles de Lípidos , Esfingomielinas , Esfingomielinas/química , Ceramidas/química , Membrana Dobles de Lípidos/química , Colesterol/química , Microscopía de Fuerza Atómica

RESUMEN

Effective sedative drugs are in great demand due to increasing incidence of nervous disorders. The present work was aimed to develop a novel sublingual sedative drug based on glycine and L-tryptophan amino acids. Carbopol and different hydroxypropyl methylcellulose species were alternatively tested as mucoadhesive agents intended to prolong tryptophan sublingual release time. A model lipid medium of fully hydrated L-α-dimyristoylphosphatidylcholine was used for optimal mucoadhesive agents selection. Simultaneous processes of drug release and diffusion in lipid medium were first investigated involving both experimental and theoretical approaches. Individual substances, their selected combinations as well as different drug formulations were consecutively examined. Application of kinetic differential scanning calorimetry method allowed us to reveal a number of specific drug-excipient effects. Lactose was found to essentially facilitate tryptophan release and provide its ability to get into the bloodstream simultaneously with glycine, which is necessary to achieve glycine-tryptophan synergism. Introduction of a mucoadhesive agent into the formulation was shown to change kinetics of drug-membrane interactions variously depending on viscosity grade. Among the mucoadhesive agents, hydroxypropyl methylcellulose species K4M and E4M were shown to further accelerate drug release, therefore they were selected as optimal. Thus, effectiveness of the novel sedative drug was provided by including some excipients, such as lactose and the selected mucoadhesive agent species. A dynamic mathematical model was developed properly describing release and diffusion in lipid medium of various drug substances. Our study clearly showed applicability of a lipid medium to meet challenges such as drug-excipient interactions and optimization of drug formulations.

Asunto(s)

Excipientes , Glicina , Hipnóticos y Sedantes , Triptófano , Triptófano/química , Triptófano/administración & dosificación , Glicina/química , Glicina/administración & dosificación , Administración Sublingual , Hipnóticos y Sedantes/administración & dosificación , Hipnóticos y Sedantes/química , Hipnóticos y Sedantes/farmacocinética , Excipientes/química , Liberación de Fármacos , Química Farmacéutica/métodos , Rastreo Diferencial de Calorimetría , Lactosa/química , Derivados de la Hipromelosa/química , Biofarmacia/métodos , Adhesividad , Viscosidad

RESUMEN

This study investigates the feasibility of fabrication of poly(1-vinyl-2-pyrrolidone) (Kollidon®25)-mediated filaments for producing tinidazole (TNZ)-loaded, customizable, child-friendly tablets (with varying shapes and sizes) using hot melt extrusion (HME) coupled with fused deposition modeling (FDM) technology. Kollidon®25, chosen for its ability to enhance the dissolution of TNZ (a BCS Class II drug), was evaluated for polymer-drug compatibility through Hansen solubility, polarity, and interaction parameter analyses, confirming good miscibility and affinity between TNZ and Kollidon®25. Placebo- and TNZ-loaded filaments were prepared in different ratios using HME, followed by the development of 3D-printed tablets via FDM. The fabricated batches of placebo and TNZ-loaded 3D tablets were characterized, and it was found that they had an average weight variation of 270.41 ± 7.44 mg and 270.87 ± 9.33 mg, hardness of 155.01 ± 11.79 N and 265.3 ± 7.62 N, and friability of 0.1583 ± 0.0011 % and 0.2254 ± 0.0013 %. Amorphization was confirmed by differential scanning calorimetry (DSC) and powder X-ray diffraction (PXRD) analysis. Scanning electron microscopy (SEM) revealed a layer-by-layer pattern with tiny fractures on the tablet surfaces, which enhanced media penetration, resulting in improved dissolution profiles. The TNZ release profile showed complete 100 % release within 2.0 h in a gastric acidic medium. These findings support the potential of Kollidon®25 to create customizable, child-friendly, 3D-printed dosage forms with different shapes and sizes for TNZ delivery, offering a unique approach to paediatric medications.

Asunto(s)

Composición de Medicamentos , Povidona , Impresión Tridimensional , Solubilidad , Comprimidos , Tinidazol , Tinidazol/química , Tinidazol/administración & dosificación , Composición de Medicamentos/métodos , Povidona/química , Humanos , Niño , Liberación de Fármacos , Química Farmacéutica/métodos , Tecnología de Extrusión de Fusión en Caliente/métodos , Rastreo Diferencial de Calorimetría/métodos , Excipientes/química

RESUMEN

This work studies the formation of deep eutectic solvents formed by one active pharmaceutical ingredient (quinine, pyrimethamine, or 2-phenylimidazopyridine) and a second component potentially acting as an excipient (betaine, choline chloride, tetramethylammonium chloride, thymol, menthol, gallic acid, vanillin, acetovanillone, 4-hydroxybenzaldehyde, syringaldehyde, propyl gallate, propylparaben, or butylated hydroxyanisole), aiming to address challenges regarding drug solubility, bioavailability, and permeability. A preliminary screening was carried out using the thermodynamic model COSMO-RS, narrowing down the search to three promising excipients (thymol, propyl gallate, and butylated hydroxyanisole). Nine solid-liquid equilibrium (SLE) phase diagrams were experimentally measured combining the three model drugs with the screened excipients, and using a combination of a visual melting method and differential scanning calorimetry. Negative deviations from thermodynamic ideality were observed in all nine systems. Furthermore, a total of four new cocrystals were found, with powder and single crystal X-ray diffraction techniques being employed to verify their unique diffraction patterns. In the thermodynamic modelling of the SLE diagrams, two COSMO-RS parametrizations (TZVP and TZVPD-FINE) were also applied, though neither consistently delivered a better description over the other.

Asunto(s)

Antimaláricos , Disolventes Eutécticos Profundos , Excipientes , Solubilidad , Antimaláricos/química , Excipientes/química , Disolventes Eutécticos Profundos/química , Rastreo Diferencial de Calorimetría/métodos , Termodinámica , Química Farmacéutica/métodos , Difracción de Rayos X/métodos , Cristalización , Solventes/química

RESUMEN

Sulfasalazine (SULF), a sulfonamide antibiotic, has been utilized in the treatment of rheumatoid arthritis (RA) and inflammatory bowel disease (IBD) since its discovery. However, its poor water solubility causes the high daily doses (1---3 g) for patients, which may lead to the intolerable toxic and side effects for their lifelong treatment for RA and IBD. In this work, two water-soluble natural anti-inflammatory alkaloids, matrine (MAR) and sophoridine (SPD), were employed to construct the co-amorphous systems of SULF for addressing its solubility issue. These newly obtained co-amorphous forms of SULF were comprehensively characterized by powder X-ray diffraction (PXRD), temperature-modulated differential scanning calorimetry (mDSC), Fourier-transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS). We also investigated their dissolution behavior, including powder dissolution, in vitro release, and intrinsic dissolution rate. Both co-amorphous systems exhibited superior dissolution performance compared to crystalline SULF. The underlying mechanism responsible for the enhanced dissolution behaviors in co-amorphous systems were also elucidated. These mechanisms include the inhibition of nucleation, complexation, increased hydrophilicity, and robust intermolecular interactions in aqueous solutions. Importantly, these co-amorphous systems demonstrated satisfactory physical stability under various storage conditions. Network pharmacological analysis was utilized to investigate the potential therapeutic targets of both co-amorphous systems against RA, revealing similar yet distinct multi-target synergistic therapeutic mechanisms in the treatment of this condition. Our study suggests these drug-drug co-amorphous systems hold promise for optimizing SULF dosage in the future and providing a potential drug combination strategy.

Asunto(s)

Alcaloides , Rastreo Diferencial de Calorimetría , Matrinas , Quinolizinas , Solubilidad , Sulfasalazina , Difracción de Rayos X , Alcaloides/química , Alcaloides/administración & dosificación , Sulfasalazina/química , Sulfasalazina/administración & dosificación , Quinolizinas/química , Quinolizinas/administración & dosificación , Difracción de Rayos X/métodos , Espectroscopía Infrarroja por Transformada de Fourier/métodos , Sinergismo Farmacológico , Antiinflamatorios no Esteroideos/química , Antiinflamatorios no Esteroideos/administración & dosificación , Antiinflamatorios no Esteroideos/farmacología , Artritis Reumatoide/tratamiento farmacológico

RESUMEN

In the manufacture of soft gelatin capsules using a rotary-die encapsulation machine, the formation of ribbons at the cooling drums and their subsequent mechanical performance are key attributes for a smooth machinability. In this paper we present the results of a comprehensive investigation of the intricate impact of the cooling drum temperature in the range between 5 and 25 °C on the mechanical and the microstructural properties of a highly concentrated gelatin formulation (40% w/w) typically used in soft capsule manufacture. The study demonstrates that the temperature at the cooling drums strongly affects the gelation kinetics, the gel elasticity and the tensile strength of the ribbons. The temperature correlates linearly with the storage modulus G' under low shear deformation, i.e. the lower the temperature of the gel, the higher the gel elasticity. A reverse linear relationship was found for the temperature-dependent ultimate tensile strength (UTS) of the gelatin ribbons, i.e. a higher drum temperature leads to a higher UTS. This inverse effect of the ageing temperature on G' and UTS can be explained by temperature-induced microstructural differences within the gel network, as indicated by FTIR spectroscopy and Differential Scanning Calorimetry (DSC) measurements. Lower ageing temperatures result in a higher number of triple helical junction zones with fewer and/or weaker hydrogen bonds, which translate into a higher gel elasticity under low shear deformation, but a lower resilience of the ribbons against rupture in tensile testing. At higher temperatures, fewer but longer and/or more thermostable triple helical links in the gel network enhance the stability of the ribbons against tensile stress. In summary, the results clearly reveal that a detailed understanding of the complex relationship between the drum temperature, the gel network structure and the mechanical properties of gelatin ribbons is essential for process optimization.

Asunto(s)

Cápsulas , Gelatina , Temperatura , Resistencia a la Tracción , Gelatina/química , Elasticidad , Geles/química , Rastreo Diferencial de Calorimetría , Composición de Medicamentos/métodos , Química Farmacéutica/métodos , Espectroscopía Infrarroja por Transformada de Fourier/métodos

RESUMEN

Polyhydroxyalkanoate (PHA) is an environmental alternative to petroleum-based plastics because of its biodegradability. The polymer properties of PHA have been improved by the incorporation of different monomers. Traditionally, the monomer composition of PHA has been analyzed using gas chromatography (GC) and nuclear magnetic resonance (NMR), providing accurate monomer composition. However, sequential analysis of the thermal properties of PHA using differential scanning calorimetry (DSC) remains necessary, providing crucial insights into its thermal characteristics. To shorten the monomer composition and thermal property analysis, we directly applied DSC to the analysis of the obtained PHA film and observed a high correlation (r2 = 0.98) between melting enthalpy and the 3-hydroxyhexanoate (3-HHx) mole fraction in the polymer. A higher 3-HHx fraction resulted in a lower melting enthalpy as 3-HHx provided the polymer with higher flexibility. Based on this, we selected the poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (P(3HB-co-3HHx)) producing strain from Cupriavidus strains that newly screened and transformed with vectors containing P(3HB-co-3HHx) biosynthetic genes, achieving an average error rate below 1.8% between GC and DSC results. Cupriavidus sp. BK2 showed a high 3-HHx mole fraction, up to 10.38 mol%, with Tm (℃) = 171.5 and ΔH of Tm (J/g) = 48.0, simultaneously detected via DSC. This study is an example of the expansion of DSC for PHA analysis from polymer science to microbial engineering.

Asunto(s)

Rastreo Diferencial de Calorimetría , Caproatos , Polihidroxialcanoatos , Caproatos/química , Polihidroxialcanoatos/química , Polihidroxialcanoatos/biosíntesis , Termodinámica , Polihidroxibutiratos