RESUMEN

BACKGROUND: Patients with hereditary multiple exostosis (HME) usually present with forearm deformity with or without radial head dislocation. Ulna lengthening has been proposed to address this condition. Exostosis resection plus ulna lengthening has been adopted in our hospital since 2008, and patients with this condition were retrospectively reviewed. Herein, we aimed to investigate the optimal timing and clinical outcomes of this surgical approach. METHODS: In all, thirty-five patients (40 forearms), including 22 boys and 13 girls, were enrolled in our study from July 2014 to September 2020. We divided the patients into 4 groups based on the age when they received surgery and the status of the radial head. Pronation and supination of the forearm, flexion and extension of the elbow, wrist ulnar deviation and wrist radial deviation, and radiological parameters including ulnar length (UL), ulnar variance (UV), the percentage of radial bowing (RB/RL), radio articular angle (RAA) and carpal slip (CS), were assessed and recorded. RESULTS: The mean UL was significantly improved after surgery in four Groups (P<0.05). In patients with radial head dislocation, we found significant improvement in forearm, wrist function and elbow flexion (p < 0.05). For the patients with radial head dislocation, the juniors demonstrated better improvement in % RB and RAA (p<0.05, p = 0.003 and 0.031). CONCLUSION: Exostosis resection and ulna lengthening with unilateral external fixation can effectively improve the function and radiological parameters of forearm deformity in HME children. For patients with radial head dislocation, early surgery can achieve better results. For patients not associated with radial head dislocation, we recommend regular follow-up and surgical treatment after 10 years of age.

Asunto(s)

RESUMEN

BACKGROUND: A corrective radius osteotomy is often performed in patients with a symptomatic distal radius malunion. In 3D-planned osteotomies, the unaffected radius is mirrored over the malunited radius after adjusting for left-right length differences using both ulnae. This approach assumes that ulnar length differences in a malunion population are similar to those in a healthy population. This study was conducted to analyze the difference in ulnar length in a distal radius malunion population and to assess the potential influence of age, sex, or malunion side on this difference. METHODS: We evaluated 65 adult patients with distal radius malunion using bilateral forearm CT scans. 3D models of both ulnae were constructed, and length differences were determined along a standardized length axis. The results were compared to two populations without a radius malunion. RESULTS: The average absolute ulnar length difference was 2.57 mm (SD 1.81), which was comparable to the two healthy populations. This difference was not significantly affected by age, sex, or malunion side. CONCLUSION: This study demonstrated that using the ulnar length difference to correct for radial length difference in the current 3D planning process, before using the contralateral radius as a template for a corrective osteotomy in patients with radius malunion, is safe.

Asunto(s)

Asunto(s)

RESUMEN

CASE: We report a case of progressive angular deformity of the left wrist in a 4-year-old girl with a 2-year history of juvenile idiopathic arthritis (JIA)-oligoarthritis subtype (<4 joints affected) with inflammatory extensor tenosynovitis affecting the left wrist, who underwent a left distal radius osteotomy with tricortical allograft for angular correction and functional recovery. Six years postoperatively, the patient demonstrates a near-anatomic left wrist and has recovered full range of motion and function. CONCLUSION: This case demonstrates how rare clinically devastating angular deformities in JIA may safely and effectively be surgically managed to promote normal, long-term, extremity function.

Asunto(s)

RESUMEN

The osteocutaneous radial forearm (OCRFF) is a versatile free flap option for bony defects of the head and neck, given the thinness and pliability of the forearm cutaneous paddle, pedicle length, reliability, lack of atherosclerosis, and functional concerns common to other osseous donor sites. The OCRFF was once associated with a high risk of radial fracture, in addition to concerns about the quality and durability of bone stock for osseous reconstruction, particularly for the mandible. Following the introduction of prophylactic plating of the radius, the incidence of symptomatic radial fracture has drastically decreased. Furthermore, modifications of the bony osteotomies and other evolutions of this flap harvest have increased the use of the OCRFF throughout the head and neck. Despite these advantages, the OCRFF is not widely utilized by microvascular reconstructive surgeons due to perceived limitations and risks. Herein, we present a multidisciplinary, contemporary review of the harvest technique, outcomes, and perioperative management for the OCRFF.

Asunto(s)

RESUMEN

CASE: A 71-year-old female patient presented with severe glenoid bone loss and deformity after 2 subsequent failed arthroplasty procedures because of baseplate failures. The patients then underwent a conversion from reverse shoulder arthroplasty to hemiarthroplasty, while using a distal radius allograft to augment the deformed glenoid. At the 2-year follow-up, the patient reported minimal pain and satisfactory outcomes. CONCLUSION: This case presents the distal radius as a potentially useful allograft option for augmenting severe glenoid bone loss in the setting of revision shoulder arthroplasty.

Asunto(s)

RESUMEN

PURPOSE: To perform a quantitative analysis of the amount of cancellous bone in the distal radius and olecranon process by segmentation of computed tomographic scans. As a secondary analysis, the bone density by Hounsfield units was evaluated at the same sites. METHODS: Computed tomography angiography images of the upper extremity were analyzed using 3-D Slicer™ medical imaging software. Bone volume (cm3) and density (Hounsfield units) from the cancellous bone between the distal radius and the olecranon process were compared by creating an advanced three-dimensional model. The images were analyzed in duplicate, and an intraclass correlation was performed to assess measurement consistency. RESULTS: Twenty subjects were included. A total volume of 5.01 ± 1.21 cm3 and 5.81 ± 1.61 cm3 for the distal radius and the olecranon process (p < .0001), respectively, was found. Regarding Hounsfield units, the density of the olecranon process was 303.1 ± 73.26, and the distal radius was 206.5 ± 63.73 (p < .0001). All intraclass correlation coefficients were >0.992. CONCLUSION: These results suggest that the olecranon process has a greater volume and a higher bone mineral density than the distal radius. With these results, the surgeon will have the ability to decide the quantity and quality of bone grafts according to the surgical procedure.

Asunto(s)

RESUMEN

BACKGROUND: The Sauvé-Kapandji (S-K) method is a surgical procedure performed for chronic deformities of the distal radial ulnar joint (DRUJ). Changes to the joint contact surface from pre- to postoperatively under physiological in vivo conditions have not yet been determined for this useful treatment. The aim of the present study was therefore to compare the articular contact area of the wrist joint between before and after the S-K method for DRUJ disorders. METHODS: The SK method was performed for 15 patients with DRUJ osteoarthritis and ulnar impaction syndrome. We calculated the Mayo Wrist Score as the patient's clinical findings and created 3-dimensional bone models of cases in which the S-K method was performed and calculated the contact area and shift in the center of the contact area using customized software. RESULTS: The Mean modified Mayo Wrist Score improved significantly from 60.3 preoperatively to 80.3 postoperatively (P < 0.01). Scaphoid contact area to the radius increased significantly from 112.6 ± 37.0 mm2 preoperatively to 127.5 ± 27.8 mm2 postoperatively (P = 0.03). Lunate contact area to radius-ulna was 121.3 ± 43.3 mm2 preoperatively and 112.5 ± 37.6 mm2 postoperatively, but this decrease was not significant (P = 0.38). Contact area ratio of scaphoid to lunate increased significantly from 1.01 ± 0.4 preoperatively to 1.20 ± 0.3 postoperatively (P = 0.02). Postoperative translations of the center of the scaphoid and lunate contact areas were decomposed into ulnar and proximal directions. Ulnar and proximal translation distances of the scaphoid contact area were 0.8 ± 1.7 mm and 0.4 ± 0.6 mm, respectively, and those of the lunate contact area were 1.1 ± 1.7 mm and 0.4 ± 1.1 mm, respectively. This study revealed changes in wrist contact area and center of the contact area before and after the S-K method. CONCLUSION: These results may accurately indicate changes in wrist joint contact area from pre- to postoperatively using the S-K method for patients with DRUJ disorder. Evaluation of changes in contact area due to bone surface modeling of the wrist joint using 3DCT images may be useful in considering surgical methods.

Asunto(s)

RESUMEN

CASE: A 32-year-old woman with bilateral Madelung deformity presented with severe pain and arthritis of the radiocarpal and distal radioulnar joints. At final follow-up, 17 months for the left and 12 months for the right wrist, she had excellent functional results with no pain. Range of motion was 30° of flexion and 30° of extension with full pronosupination. CONCLUSION: There is paucity in the literature regarding salvage procedures in adults with this deformity. We demonstrate treatment with distal ulna excision and an radioscapholunate arthrodesis. This procedure may be indicated in Madelung deformity and proximal radiocarpal and distal radioulnar joint arthritis.

Asunto(s)

RESUMEN

Congenital pseudarthrosis of the forearm bones (CPFBs) is rare, with only 106 reported cases, and is frequently associated with neurofibromatosis (NF). Approximately 5% of patients with NF develop pseudarthrosis, and 50% of patients with pseudarthrosis have NF. Achieving bone union is difficult in congenital pseudarthrosis. Many methods have been attempted, including casting, internal fixation with or without grafting, and electrical stimulation, but failure is frequent. Free vascularized fibular flaps (FVFs) have been used to bridge long bone defects since 1975 and in tibial pseudarthrosis since 1979. In CPFB, FVF is more successful than other methods in achieving union and is the current treatment of choice. Here, we presented three cases of forearm pseudarthrosis treated with FVF, reviewed the literature on CPFB, and discussed some technical aspects of FVF treatment. Three cases of congenital pseudoarthrosis were treated with free fibula flaps, diagnosed at ages of 7 years (ulna), 15 months (radius), and 9 years (radius and ulna). Two flaps were stabilized with intramedullary wires and latterly, one with compression plates. One persistent nonunion received revision nonvascularized bone grafting and plating. All patients achieved union by 11 months after index surgery. Reconstruction with vascularized fibula is the treatment of choice because it offers the highest published union rates and good functional results. Complete resection of the affected bone and stable fixation, latterly with compression plates are critical to success. Surgery is technically demanding, and complications are common. Secondary surgery may be required, but outcomes are favorable. LEVEL OF EVIDENCE: IV.

Asunto(s)

RESUMEN

Currently, the repair of large bone defects still faces numerous challenges, with the most crucial being the lack of large bone grafts with good osteogenic properties. In this study, a novel bone repair implant (degradable porous zinc scaffold/BF Exo composite implant) was developed by utilizing laser melting rapid prototyping 3D printing technology to fabricate a porous zinc scaffold, combining it under vacuum conditions with highly bioactive serum exosomes (BF EXO) and Poloxamer 407 thermosensitive hydrogel. The electron microscope revealed the presence of tea saucer-shaped exosomes with a double-layered membrane structure, ranging in diameter from 30-150 nm, with an average size of 86.3 nm and a concentration of 3.28E+09 particles/mL. In vitro experiments demonstrated that the zinc scaffold displayed no significant cytotoxicity, and loading exosomes enhanced the zinc scaffold's ability to promote osteogenic cell activity while inhibiting osteoclast activity. In vivo experiments on rabbits indicated that the hepatic and renal toxicity of the zinc scaffold decreased over time, and the loading of exosomes alleviated the hepatic and renal toxic effects of the zinc scaffold. Throughout various stages of repairing radial bone defects in rabbits, loading exosomes reinforced the zinc scaffold's capacity to enhance osteogenic cell activity, suppress osteoclast activity, and promote angiogenesis. This effect may be attributed to BF Exo's regulation of p38/STAT1 signaling. This study signifies that the combined treatment of degradable porous zinc scaffolds and BF Exo is an effective and biocompatible strategy for bone defect repair therapy.

Asunto(s)

RESUMEN

Congenital pseudarthrosis of the forearm poses a considerable challenge because of its rarity. The objective of this report is to introduce a novel surgical technique for its treatment. Here, we document a case of congenital pseudarthrosis of the radius in a 3-year-old boy diagnosed with type-1 neurofibromatosis. The surgical treatment involved the excision of approximately 9 cm of native radial periosteum and a bifocal radius osteotomy, which was supplemented with a vascularized tibial periosteal transplant to facilitate bone healing. Anastomosis between the anterior tibial vessels and radial vessels was performed. No immediate or late postoperative complications were observed. After 3 weeks, a robust callus formation was observed, and during a follow-up examination 3 years and 4 months later, a wide range of active forearm rotation was noted. This report suggests that vascularized periosteal flaps show promise as a viable treatment option for congenital pseudarthrosis of the forearm. They offer an alternative to vascularized fibular grafts or single-bone forearm constructs.

Asunto(s)

RESUMEN

In the forearm, posttraumatic heterotopic ossification usually forms as a proximal radioulnar synostosis. It can occur after soft tissue injury involving the interosseous membrane or after surgery involving the radio and ulna, such as distal biceps tendon repair. It can also be induced by radial head dislocation or fracture. Screening radiography can be used to select the appropriate time for excision. The synostosis can be resected when the ectopic bone margin and trabeculation appear mature on radiographs. An interval of 6-12 months from the injury is generally recommended based on ectopic bone maturity. Selection of the surgical approach depends on site, extension (elbow joint or proximal radioulnar joint), severity of the initial articular surface, and periarticular tissue injury. The posterolateral approach is indicated for synostoses: at or distal to the bicipital tuberosity, at the level of the radial head, and proximal radioulnar joint. The posterior global approach is recommended when the forearm synostosis is associated with complete bony ankylosis of the elbow involving the distal aspect of the humerus. After surgical resection of a proximal radioulnar synostosis, the exposed bone surfaces can be covered with interposition material to minimize recurrence.

Asunto(s)

RESUMEN

PURPOSE: To evaluate the inductive capacity of F18 bioglass putty on the induced membrane technique in a segmental bone defect of the rabbit's radius. METHODS: Ten female Norfolk at 24 months of age were used. The animals were randomly separated based on postoperative time points: five rabbits at 21 and four at 42 days. A 1-cm segmental bone defect was created in both radii. The bone defects were filled with an F18 bioglass putty. RESULTS: Immediate postoperative radiographic examination revealed the biomaterial occupying the segmental bone defect as a well-defined radiopaque structure with a density close to bone tissue. At 21 and 42 days after surgery, a reduction in radiopacity and volume of the biomaterial was observed, with particle dispersion in the bone defect region. Histologically, the induced membrane was verified in all animals, predominantly composed of fibrocollagenous tissue. In addition, chondroid and osteoid matrices undergoing regeneration, a densely vascularized tissue, and a foreign body type reaction composed of macrophages and multinucleated giant cells were seen. CONCLUSIONS: the F18 bioglass putty caused a foreign body-type inflammatory response with the development of an induced membrane without expansion capacity to perform the second stage of the Masquelet technique.

Asunto(s)

RESUMEN

Congenital radial head subluxation is relatively rare and may be overlooked due to mild symptoms. The diagnosis mainly relies on imaging and history. Observation is an option for those with insignificant symptoms, while surgical intervention, such as ulnar osteotomy or arthroscopy, is often required when dysfunction exists. A 30-year-old man was admitted with congenital radial head dislocation, which was treated with manipulative repositioning. During follow-up, the patient regained the original mobility of the elbow joint and had no recurrence of dislocation. In conclusion, in adults with congenital dislocation of the radial head, we recommend conservative treatment as a first step.

Asunto(s)

RESUMEN

INTRODUCTION: Growth modulation allows correction of progressive ulnar deviation of the distal radius in skeletally immature patients, which may occur as a consequence of various pathologies. The aim of this study is to evaluate the radiographic results and complication rate in a series of patients treated with minifragment plates. METHODS: The medical records of 12 patients who underwent guided growth with a minifragment plate on the radial aspect of the distal radius as a consequence of angular deformities in the distal radius were retrospectively reviewed. Demographic data, radiographic changes, and complication rate were analyzed. RESULTS: A total of 14 wrists and forearms were evaluated. The mean age at which surgery was performed was 10.5 years (interquartile range: 9.0 to 11.3). The average time between placement and removal of the material was 28.7 months (SD: 8,89). In each case, a general improvement of the radiographic parameters was obtained. There were 3 postoperative complications, but only 1 of them required reintervention (broken metaphyseal screw). CONCLUSIONS: Hemiepiphysiodesis using a minifragment plate is a treatment that respects the surgical anatomy and offers an alternative surgical option for angular deformities of the distal radius in children. LEVEL OF EVIDENCE: Level IV.

Asunto(s)

RESUMEN

BACKGROUND: The incidence of radial head fractures is increasing, and radial head arthroplasty (RHA) is being more frequently used as treatment for irreparable fractures. Our objective was to compare radiocapitellar pressure between the native joint and 2 radial head prosthesis conditions: (1) a prosthetic head that was aligned to the forearm axis of rotation and (2) the same prosthesis with an axisymmetric nonaligned head. METHODS: Ten cadaveric specimens received a pressfit radial head prosthesis (Align; Skeletal Dynamics) for both prosthetic testing conditions. Anatomic alignment (AL) was defined as the prosthetic head aligned to the forearm axis of rotation. Axisymmetric alignment (AX) was defined as the prosthetic radial head aligned to the axis of the prosthetic stem. Axial load was applied with the elbow in extension and the forearm pronated. Data were collected using a Tekscan 4000 sensor. RESULTS: The mean pressure in the AL and AX groups were significantly higher than the mean pressure in the native joint. Compared with the native joint, the mean pressure was 19% higher in the AL group and 56% higher in the AX group. Peak pressure beyond 5 MPa occurred in 0 specimens in the native joint group, in 1 specimen (10%) in the AL group, and in 5 specimens (50%) in the AX group. DISCUSSION: Our results demonstrated that a pressfit radial head prosthesis aligned with the forearm axis of rotation yields capitellar pressures that were more similar to the native condition than a nonaligned pressfit prosthesis. These findings suggest that anatomic alignment may optimize capitellar wear properties, improving the long-term durability of radial head arthroplasty.

Asunto(s)

RESUMEN

The osteocutaneous radial forearm free flap (OCRFFF) is a versatile flap with the ability to reconstruct complex defects. We detail the techniques necessary to harvest an OCRFFF, including an outline on making 90-degree osteotomies to maximize bone harvest. In this pictorial essay, we provide illustrations of the anatomy and surgical techniques necessary for OCRFFF harvest. Detailed discussion is provided on how to protect the perforators to the bone and the approach to making osteotomies in a 90-degree fashion. The approach for prophylactic plating of the radius to prevent radius fractures is outlined. A case presentation on the real-life utilization of this flap is included. The OCRFFF is an excellent head and neck reconstructive option. While there are limitations to its use for patients requiring dental rehabilitation or long/anterior mandibular defects, for the right patient and indication it has shown great success in reconstructive efforts.

Asunto(s)

RESUMEN

We experienced an atypical case of radial longitudinal deficiency that did not fit into any classifications, including Blauth. The patient had a bilateral hypoplastic thumb, in which the index and middle fingers were missing in the right hand. We performed surgeries in four stages: centralization of the right hand, opponensplasty of the right thumb, opponensplasty of the left thumb, and distraction lengthening of the right ulnar. Twenty-five years after the initial treatment, the patient was satisfied with the treatment and had no significant difficulty with activities of daily living.

Asunto(s)

RESUMEN

Osteosarcoma treatment with limb-sparing surgery using liquid nitrogen can be applied to canine patients experiencing diminished quality of life after leg amputation. In particular, forelimb amputation may affect gait more than hindlimb amputation. In this study, limb-sparing surgery using liquid nitrogen was applied to primary osteosarcomas arising in the proximal scapula of a Welsh Corgi, the proximal humerus of a Golden Retriever, and the distal radius of a Great Pyrenees, according to the protocol of Tsuchiya et al. In all cases, postoperative radiographic examination revealed bone union between the treated and matrix bones. All patients recovered their gait postoperatively. These results suggest that limb-sparing surgery using liquid nitrogen-treated autologous bone is an effective option for patients with osteosarcoma.

Asunto(s)