RESUMEN

SUMMARY: The aim of this study was to derive the equations for sex determination and to test the accuracy of discrimination between sexes using measurements of the patella in the Thai population. The sample comprised 254 Thai skeletons (134 males and 120 females) aged between 22 and 97 years, with an average age of 63.3years, obtained from the Osteology Research and Training Center, Faculty of Medicine, Chiang Mai University, Chiang Mai. Six variables were measured in 254 pairs of normal patellae. The mean values of patellar measurements in males were significantly greater than those in females for all variables (P<0.05). Statistical analysis further showed that all variables were useful in sex determination. Stepwise discriminant function analysis yielded an accuracy of 83.2 % (83.8 % male, 82.5 % female) and 85.5 % (85.3 % male, 85.8 % female) for the left and right patellae, respectively. These results suggested that measurement of the right patella is preferable for skeletal sexing. If this is not available, the forensic specialist can use the left patella instead, with an average accuracy of more than 80.0 % in giving a correct classification. The findings of this study demonstrate that the patella is an important bone in sex determination. They suggest that either the left or right patella can be used for sex determination, especially in the Northern Thai population.

El objetivo de este estudio fue derivar las ecuaciones para la determinación del sexo y probar la precisión de la discriminación entre sexos utilizando mediciones de la patela en la población tailandesa. La muestra estuvo compuesta por 254 esqueletos tailandeses (134 hombres y 120 mujeres) con edades comprendidas entre 22 y 97 años, con una edad promedio de 63,3 años, del Centro de Investigación y Capacitación en Osteología de la Facultad de Medicina de la Universidad de Chiang Mai, Chiang Mai. Se midieron seis variables en 254 pares de patelas normales. Los valores medios de las mediciones patelares en los hombres fueron significativamente mayores que los de las mujeres, para todas las variables (P <0,05). Además, el análisis estadístico mostró que todas las variables fueron útiles para la determinación del sexo. El análisis de la función discriminante por pasos arrojó una precisión del 83,2 % (83,8 % hombres, 82,5 % mujeres) y 85,5 % (85,3 % hombres, 85,8 % mujeres) para las patelas izquierda y derecha, respectivamente. Estos resultados sugieren que la medición de la patela derecha es preferible para la determinación del sexo en esqueletos. En caso de no estar disponible y para dar una clasificación correcta, el especialista forense puede utilizar la patela izquierda, con una precisión promedio de más del 80,0 %. Los hallazgos de este estudio demuestran que la patela es un hueso importante en la determinación del sexo. Se sugiere que se pueda utilizar la patela izquierda o derecha para determinar el sexo, especialmente en la población del norte de Tailandia.

Asunto(s)

RESUMEN

PURPOSE: The suprapatellar bursa is located in the proximal deep layer of the patella and is thought to reduce tissue friction by changing from a single-membrane structure to a double-membrane structure during knee joint motion. However, the dynamics of the suprapatellar bursa have only been inferred from positional relationships, and the actual dynamics have not been confirmed. METHODS: Dynamics of the suprapatellar bursa during knee joint motion were observed in eight knees of four Thiel-fixed cadavers and the angle at which the bursa begins to show a double membrane was revealed. The flexion angles of knee joints were measured when the double-membrane structure of the suprapatellar bursa began to appear during knee joint extension. RESULTS: The suprapatellar bursa changes from a single membrane to a double-membrane structure at 91 ± 4° of flexion, when the knee joint is moved from a flexed position to an extended position. CONCLUSION: The suprapatellar bursa may be involved in limitations to knee joint range of motion and pain at an angle of approximately 90°. Further studies are needed to verify whether the same dynamics are observed in living subjects.

Asunto(s)

RESUMEN

BACKGROUND: Because of the increased prevalence of revision anterior cruciate ligament (ACL) reconstruction, there has been a desire to understand the role of posterior tibial slope on increased anterior tibial translation and increased ACL graft forces. One potential concern in supratubercle anterior closing wedge proximal tibial osteotomy (ACW-PTO) for decreasing the posterior tibial slope is the risk of altering the patellar height. PURPOSE: To radiographically assess changes in (1) patellar height, (2) anterior tibial translation, and (3) posterior tibial slope after supratubercle ACW-PTO. STUDY DESIGN: Case series; Level of evidence, 4. METHODS: Patients who underwent supratubercle ACW-PTO by a single surgeon between July 2019 and June 2023 were included. Standardized lateral knee weightbearing radiographs to assess patellar height (via the Caton-Deschamps index), anterior tibial translation of the lateral tibial plateau relative to the lateral femoral condyle, and posterior tibial slope were obtained at 4 time points (preoperatively and 1 day, 3 months, and 6 months postoperatively). Paired t test was used to compare differences between preoperative, 1-day, and 3- and 6-month values for patellar height as measured using the Caton-Deschamps index and for posterior tibial slope. Paired t test was also used to compare differences in the preoperative and 6-month postoperative values for anterior tibial translation. RESULTS: In 20 patients after ACW-PTO, the Caton-Deschamps index demonstrated a significant increase in patellar height on postoperative day 1 (P < .001) but no significant differences at 3 (P = .057) and 6 (P = .176) months postoperatively. Anterior tibial translation on standing lateral knee radiographs was significantly decreased by a mean of 8.9 mm from preoperatively to 6 months postoperatively (P < .001). Posterior tibial slope was significantly decreased by a mean of 11.2° from preoperatively to 6 months postoperatively (P < .001). CONCLUSION: Supratubercle ACW-PTO performed for ACL reconstruction failure in the setting of an increased posterior tibial slope did not induce significant changes in patellar height postoperatively. Furthermore, after ACW-PTO, there was a significant decrease in anterior tibial translation and posterior tibial slope.

Asunto(s)

RESUMEN

BACKGROUND: The patellar height index is important; however, the measurement procedures are time-consuming and prone to significant variability among and within observers. We developed a deep learning-based automatic measurement system for the patellar height and evaluated its performance and generalization ability to accurately measure the patellar height index. METHODS: We developed a dataset containing 3,923 lateral knee X-ray images. Notably, all X-ray images were from three tertiary level A hospitals, and 2,341 cases were included in the analysis after screening. By manually labeling key points, the model was trained using the residual network (ResNet) and high-resolution network (HRNet) for human pose estimation architectures to measure the patellar height index. Various data enhancement techniques were used to enhance the robustness of the model. The root mean square error (RMSE), object keypoint similarity (OKS), and percentage of correct keypoint (PCK) metrics were used to evaluate the training results. In addition, we used the intraclass correlation coefficient (ICC) to assess the consistency between manual and automatic measurements. RESULTS: The HRNet model performed excellently in keypoint detection tasks by comparing different deep learning models. Furthermore, the pose_hrnet_w48 model was particularly outstanding in the RMSE, OKS, and PCK metrics, and the Insall-Salvati index (ISI) automatically calculated by this model was also highly consistent with the manual measurements (intraclass correlation coefficient [ICC], 0.809-0.885). This evidence demonstrates the accuracy and generalizability of this deep learning system in practical applications. CONCLUSION: We successfully developed a deep learning-based automatic measurement system for the patellar height. The system demonstrated accuracy comparable to that of experienced radiologists and a strong generalizability across different datasets. It provides an essential tool for assessing and treating knee diseases early and monitoring and rehabilitation after knee surgery. Due to the potential bias in the selection of datasets in this study, different datasets should be examined in the future to optimize the model so that it can be reliably applied in clinical practice. TRIAL REGISTRATION: The study was registered at the Medical Research Registration and Filing Information System (medicalresearch.org.cn) MR-61-23-013065. Date of registration: May 04, 2023 (retrospectively registered).

Asunto(s)

RESUMEN

OBJECTIVES: This study aims to evaluate the inter-observer reliability of fibula-condyle-patella angle measurements and to compare it with other measurement techniques. PATIENTS AND METHODS: Between January 01, 2023 and January 31, 2023, a total of 108 patients (20 males, 88 females; mean age: 47.5±12.0 years; range, 18 to 72 years) who underwent X-rays using the fibula-condyle-patella angle, Insall-Salvati, Caton-Deschamps, Blackburne-Pell, and plateau-patella angle (PPA) methods were retrospectively analyzed. Knee lateral radiographs taken in at least 30 degrees of flexion and appropriate rotation were scanned. All measurements were made by two orthopedic surgeons who were blinded to measurement methods. RESULTS: Right knee patellar height measurements were conducted in 56 patients, while left knee patellar heights were assessed in 52 patients. The highest inter-observer concordance was found in the fibula-condyle-patella angle. The second highest concordance was found in the Insall-Salvati. The highest concordance correlation was found with PPA in the measurements of both researchers. CONCLUSION: The fibula-condyle-patella angle is a reliable technique with a good inter-observer reliability for measuring patellar height. We believe that this study will inspire future research to establish comprehensive reference values for clinical applications.

Asunto(s)

RESUMEN

OBJECTIVE: To evaluate the relationship between bone mineral density (BMD) by measuring the prepatellar fat thickness with knee radiography and to gain a measurement method that has not been done before in the literature. STUDY DESIGN: Cross-sectional descriptive study. Place and Duration of the Study: Department of Physical Medicine and Rehabilitation, Training and Research Hospital, Sanliurfa, Turkiye, between January and June 2020. METHODOLOGY: Patients' age, body mass index (BMI) data, prepatellar fat thickness (mm), L1-L4 total, bone mineral density femoral neck, femur trochanter major, and femur total T scores were recorded. The relationships between these three groups (normal, osteopenia, osteoporosis) and between prepatellar fat tissue measurement were evaluated. One-way analysis of variance (ANOVA) and Post Hoc Tukey tests were used in the analysis. RESULTS:  A statistically significant difference was found in terms of trochanter major T score measurements (X2 = 20.435; p <0.001) and BMI (X2 = 66.535; p <0.001) measurements of prepatellar fat thickness measurement. A statistically significant difference was found between the three groups in terms of prepatellar fat thickness measurement, L1-4 T-score, femoral neck, and femur total values (p <0.001). CONCLUSION:  Prepatellar fat thickness in postmenopausal Turkish women was positively correlated with BMD; BMD increases as the prepatellar fat thickness increases. This explains that perapatellar fat thickness creates a mechanical load on the bones and causes an increase in BMD. KEY WORDS: Osteoporosis, Fat thickness, Bone mineral density.

Asunto(s)

RESUMEN

PURPOSE: Abnormal patellar height has been identified as a source of aberrant mechanical functioning within the patellofemoral joint. The purpose of this study is to examine the statistical agreement among three commonly used classification methods: Blackburne-Peel (BPI), Caton-Deschamps (CDI) and Insall-Salvati (ISR), by evaluating (1) the rates of patella alta identification and (2) the ability for one index to predict another. METHODS: One hundred lateral knee radiographs were evaluated using BPI, CDI and ISR to classify each knee as patella normal, patella alta or patella baja. Linear regression analysis was performed to evaluate the relationship between each index. Conversion equations were then derived using the reported linear regression best-fit line, comparing each pair of indices. RESULTS: Patella alta was identified in 15 knees using BPI, 15 using CDI and 25 using ISR. A total of seven knees were classified as patella alta by all BPI, CDI and ISR. Statistical analysis revealed significant correlation (p ≤ 0.001) among BPI and CDI (R2 = 0.706), BPI and ISR (R2 = 0.328) and CDI and ISR (R2 = 0.288). Wilcoxon Signed-Rank test between the three indices revealed no significant difference between the means of converted and original indices. CONCLUSION: Despite their significant correlations and adequate reproducibility, variability between common patellar height indices render predictions and conversions between BPI, CDI and ISR inequivalent. Users of these indices must be aware of their incongruent properties when considering application to patients in the clinical setting. Furthermore, it remains unclear which patellar height measurement technique is the correct index to use in a given knee. This study highlights the need for further investigation to create a reliable and standardised method for identifying patella height. LEVEL OF EVIDENCE: Level IV.

Asunto(s)

RESUMEN

OBJECTIVES: The study aims to investigate the relationship between the vastus medialis obliquus (VMO) muscle distal insertion features and patellar chondral lesion presence. PATIENTS AND METHODS: This cross-sectional study included a total of 100 patients (18 males, 82 females, mean age 67.2±7.1 years; range, 50 to 86 years) who underwent total knee arthroplasty (TKA). Radiological assessments, including merchant view and standing orthoroentgenograms, were conducted. The current osteoarthritis stage, varus angle, quadriceps angle (Q angle), patella-patellar tendon angle (P-PT angle), congruence angle, and sulcus angle were calculated. The VMO tendon length, muscle fiber angle, tendon insertion width measurements, and patellar chondral lesion localization data were obtained intraoperatively. Grouping was done according to the distal insertion width of the VMO tendon to the medial edge of the patella. The medial rim of the patella was divided into three equal-sized sectors. The first group (Group 1, n=31) consisted of patients who had an insertion from the quadriceps tendon into the upper one-third of the patella. The second group (Group 1, n=48) consisted of patients with a distal insertion expanding into the middle one-third of the patella. The third group (Group 3, n=21) consisted of patients who had a distal insertion extending into the distal third region of the medial patella margin. The patella joint surface was divided into sectors, and the presence and location of cartilage lesions were noted in detail. RESULTS: The mean tendon insertion width rate was 45.99±16.886% (range, 16.7 to 83.3%). The mean muscle fiber insertion angle was 51.85±11.67º (range, 20º to 80º). The mean tendon length was 12.45±3.289 (range, 4 to 20) mm. There was no significant difference between the mean age, weight, height, body mass index, BMI, fiber angle, tendon length, varus angle, Q angle, sulcus angle, and congruence angle data among the groups. In terms of the P-PT angle, Groups 1 and 2 had a significant relationship (p=0.008). No relationship was found between the mean fiber insertion angle, mean tendon length, or the presence of chondral lesions. There was a statistically significant difference among the groups regarding the presence of chondral lesions. The highest percentage of chondral lesion frequency was observed in Group 3 (95.24%), followed by Group 1 (90.3%) and Group 2 (89.6%), respectively. Compared to the other two groups, Group 3 had a higher average ratio of lesion areas per patient. CONCLUSION: Our study results demonstrate that the formation and localization of the patellar chondral lesions are affected by the insertion width type of the VMO muscle into the patella. Group 2-type insertion is associated with a lower lesion frequency rate than Groups 1 and 3.

Asunto(s)

RESUMEN

PURPOSE: The J-sign is a clinical evaluation tool that assesses for patellar maltracking and is considered positive if lateral translation of the patella in extension, in the pattern of an inverted J is observed. This study aims to determine the association of clinical J-sign with imaging features noted on dynamic kinematic computed tomography (DKCT). METHODS: A retrospective review was conducted by reviewing the clinical records of all patients aged 18 years or younger who had a CT patellar tracking scan done between 1 January 2005 to 31 December 2016 in a single institution. Patients who had the presence or absence of a 'J-sign' evaluated clinically were included. Radiographic parameters evaluated using the axial cuts include the patellar tilt angle, congruence angle, Dejour's classification, femoral sulcus angle, trochlear groove depth, and Wiberg's classification. Patients were then divided into two groups based on the presence or absence of J-sign on clinical examination. The radiographic measurements were then analyzed for association with the presence or absence of J-sign on clinical examination. RESULTS: Patients with a positive J-sign had an increased patellar tilt of 23.3° ± 14.2° and an increased congruence angle of 47.1° ± 28.5° when measured in extension as compared to a patellar tilt of 18.3° ± 10.8° and a congruence angle of 32.1° ± 20.8° in patients with a negative J-sign (p = 0.024 and 0.004, respectively). Comparisons of the change in congruence angles with the knee in full extension and at 20° flexion also yielded significantly higher change of 28.0° ± 20.4° in patients with a positive J-sign as compared to 11.9° ± 17.5° in patients with a negative J-sign. Patients with a positive J-sign also had an increased TT-TG distance of 17.6 ± 5.6 mm as compared to a TT-TG distance of 14.7 ± 6.9 mm in patients with a negative J-sign (p = 0.01). CONCLUSION: Patients with a positive J-sign had an increased patellar tilt and an increased congruence angle when measured in extension. Increased TT-TG distance was also significantly associated with positive J-sign. Patients with a positive J-sign also had a greater change in their congruence angle when measured with the knee in full extension and at 20° of flexion.

Asunto(s)

RESUMEN

Our understanding of patellar instability and the medial patellofemoral complex (MPFC) has evolved over the past 15 years. Despite advancements and appreciation of the anatomy and biomechanics of the MPFC, the best surgical treatment for recurrent patellar instability has yet to be determined. The goals of medial patellofemoral ligament (MPFL), medial quadriceps tendon femoral ligament (MQTFL), or MPFC reconstructions (with grafts from both the patella and quad to the femur) are to return patients back to activity and avoid complications such as recurrent instability, overconstraint, secondary arthrosis, and potential patellar fracture from surgical drill holes. Other considerations when managing recurrent instability include patella alta, hypermobility, and whether an osteotomy procedure is indicated. Although we always need to make good choices and mind our P's and Q's, the big question remains: Is MPFL, MQTFL, or MPFC the best choice for our patients?

Asunto(s)

Asunto(s)

RESUMEN

The medial patellofemoral complex (MPFC) is the term used to describe the primary soft tissue stabilizer of the patella, which consists of fibers that attach to the patella (medial patellofemoral ligament, or MPFL), and the quadriceps tendon (medial quadriceps tendon femoral ligament, or MQTFL). Despite the variability of its attachment on the extensor mechanism, the midpoint of this complex is consistently at the junction of the medial quadriceps tendon with the articular surface of the patella, indicating that either patellar or quadriceps tendon fixation can be used for anatomic reconstruction. Multiple techniques exist to reconstruct the MPFC, including graft fixation on the patella, quadriceps tendon, or both structures. Various techniques using several graft types and fixation devices have all reported good outcomes. Regardless of the location of fixation on the extensor mechanism, elements critical to the success of the procedure include anatomic femoral tunnel placement, avoiding placing undue tension on the graft, and addressing concurrent morphological risk factors when present. This infographic reviews the anatomy and techniques for the reconstruction of the MPFC, including graft configuration, type, and fixation, while addressing common pearls and pitfalls in the surgical treatment of patellar instability.

Asunto(s)

RESUMEN

PURPOSE: Patellar height is a risk factor for patellar instability, correlated with the tibia length/femur length (T/F) ratio. This study aimed to explore the changes in the T/F ratio in patients with patella instability and the potential correlation with the morphology of the patellofemoral joint and extensor moment arm. METHOD: A retrospective analysis was performed to assess the ratio of lower limb length morphological characteristics of the patellofemoral by full weight-bearing long-leg standing radiographs, magnetic resonance imaging, and computed tomography in 75 patients with patellar instability and 75 participants from a randomly selected control group from January 2020 to September 2021. A total of eight parts were measured, including mechanical tibia length/femur length (mT/F) ratio, anatomical tibia length/femur length (aT/F) ratio, hip-knee-ankle angle, femoral neck-shaft angle, femoral valgus cut angle, patellar height, Dejour classification, sulcus angle, trochlear angle, medial trochlear inclination, lateral trochlear inclination, patella tilt angle and patellar tendon moment arm to evaluate the difference of morphology between patient group and control groups. RESULTS: The mT/F (0.840 ± 0.031 vs. 0.812 ± 0.026, p < 0.001) and aT/F (0.841 ± 0.033 vs. 0.808 ± 0.028, p < 0.001) ratios in the patient group were significantly greater than that in the control group. There was a significant correlation between patellar height and increased mT/F and aT/F ratios (p < 0.05). CONCLUSION: Patients with patellar instability had a larger lower limb length ratio, and the change in lower limb length ratio was correlated with patellar height.

Asunto(s)

RESUMEN

Sex prediction from bone measurements that display sexual dimorphism is one of the most important aspects of forensic anthropology. Some bones like the skull and pelvis display distinct morphological traits that are based on shape. These morphological traits which are sexually dimorphic across different population groups have been shown to provide an acceptably high degree of accuracy in the prediction of sex. A sample of 100 patella of Mixed Ancestry South Africans (MASA) was collected from the Dart collection. Six parameters: maximum height (maxh), maximum breadth (maxw), maximum thickness (maxt), the height of articular facet (haf), lateral articular facet breadth (lafb), and medial articular facet breath (mafb) were used in this study. Stepwise and direct discriminant function analyses were performed for measurements that exhibited significant differences between male and female mean measurements, and the "leave-one-out" approach was used for validation. Moreover, we have used eight classical machine learning techniques along with feature ranking techniques to identify the best feature combinations for sex prediction. A stacking machine learning technique was trained and validated to classify the sex of the subject. Here, we have used the top performing three ML classifiers as base learners and the predictions of these models were used as inputs to different machine learning classifiers as meta learners to make the final decision. The measurements of the patella of South Africans are sexually dimorphic and this observation is consistent with previous studies on the patella of different countries. The range of average accuracies obtained for pooled multivariate discriminant function equations is 81.9-84.2%, while the stacking ML technique provides 90.8% accuracy which compares well with those presented for previous studies in other parts of the world. In conclusion, the models proposed in this study from measurements of the patella of different population groups in South Africa are useful resent with reasonably high average accuracies.

Asunto(s)

RESUMEN

BACKGROUND: The medial patellofemoral complex (MPFC) is a structure composed of the medial quadriceps tendon-femoral ligament (MQTFL) superiorly and the medial patellofemoral ligament (MPFL) inferiorly. The pediatric MPFL anatomy has been well described, but the precise anatomy of the MQTFL has only recently been described and studied in skeletally immature patients. PURPOSE: To describe the anatomic relationship between the MQTFL and its insertion on the quadriceps tendon and patella in pediatric specimens. STUDY DESIGN: Descriptive laboratory study. METHODS: A total of 22 pediatric cadaveric knee specimens were dissected to analyze attachment of the MQTFL to the quadriceps tendon and patella. Dissection was facilitated using lateral parapatellar arthrotomy followed by eversion of the extensor mechanism to evaluate MQTFL fibers from its undersurface. RESULTS: The mean specimen age was 7.4 years. Specimens were divided based on age into a younger cohort (1-2 years), middle cohort (4-8 years), and older cohort (9-12 years). The quadriceps tendon attachment (QTA) of the MQTFL proximal to the patella extended a median of 5.0 mm in the younger cohort, 11.4 mm in the middle cohort, and 12.0 mm in the older cohort, with significant differences found between the younger and middle cohorts (P < .047) and the younger and older cohorts (P < .001). The QTA as a percentage of patellar articular height averaged 44.4% across all specimens. The vertical height of the patella measured a median of 14.0 mm, 22.3 mm, and 27.3 mm in the younger, middle, and older cohorts, respectively. CONCLUSION: This study expands on the recently described anatomy of the pediatric MPFC to quantify the anatomic relationship between the MQTFL attachment to the quadriceps tendon and patella in a more clinically relevant cohort of donor specimens. CLINICAL RELEVANCE: As access to pediatric cadaveric tissue is extremely limited, a better understanding of MPFC and MQTFL anatomy will support surgeons in preoperative planning and intraoperative considerations for their approach to MQTFL and MPFL reconstruction. This may facilitate improved anatomic surgical stabilization of the patellofemoral joint in pediatric patients.

Asunto(s)

RESUMEN

The relationship between the morphological characteristics of the infrapatellar fat pad (IFP) and joint deformity has yet to be fully elucidated. Therefore, the purpose of this study was to clarify the morphological characteristics of the IFP and to identify the relationships between morphological characteristics of the IFP and degenerative grade of the articular surface of the patella. This investigation examined 41 legs from 25 Japanese cadavers. The IFP length, width, and volume were measured. It was categorized into three types: Type I, IFP proximal located on medial and lateral sides of the patella; Type II, the IFP proximal only located medially; and Type III, absence of the IFP proximal. Articular surfaces were graded as macroscopically intact or mildly altered (Grade I), moderately (Grade II), or severely (Grade III). Grade III was significantly more frequent than Grades I or II in Type III. IFP volume was significantly larger in Type I than in Types II or III. A negative correlation was found between the degenerative grade of the articular surface of the patella and IFP volume. It was suggested that a relationship between the degenerative grade of the articular surface of the patella and the IFP volume.

Asunto(s)

RESUMEN

BACKGROUND: The lateral patellofemoral complex (LPFC) is an important stabilizer of the patella composed of the lateral retinacular structures including the lateral patellofemoral ligament (LPFL), the lateral patellomeniscal ligament (LPML), and the lateral patellotibial ligament (LPTL). While the isolated anatomy of the LPFL has been previously described, no previous study has investigated the entirety of the LPFC structure, length changes, and radiographic landmarks. An understanding of LPFC anatomy is important in the setting of LPFL injury or previous lateral release resulting in iatrogenic medial instability requiring LPFC reconstruction. PURPOSE: To both qualitatively and quantitatively describe the anatomy and length changes of the LPFC on gross anatomic dissections and standard radiographic views. STUDY DESIGN: Descriptive laboratory study. METHODS: Ten nonpaired cadaveric specimens were utilized in this study. Specimens were dissected to identify distinct attachments of the LPFL, LPML, and LPTL. Ligament lengths, footprints, and centers of each attachment were described with respect to osseous landmarks using a 3-dimensional coordinate measuring device. Ligament length changes were also assessed from 0° to 90° of flexion. Radiopaque markers were subsequently utilized to describe attachments on standard anteroposterior and lateral radiographic views. RESULTS: The individual elements of the LPFC were identified in all specimens. The LPFL patellar attachment had an average total length of 22.5 mm (range, 18.3-27.5 mm), involving a mean of 59% (range, 50%-75%) of the sagittal patella. Based on the average patellar size, a mean of 63% of the LPFL attached to the patella, and the remainder (11.1 ± 1.4 mm) inserted into the patellar tendon. The femoral attachment of the LPFL had a mean maximum length of 24.4 ± 4.3 mm. The center of the LPFL femoral attachment was a mean distance of 13.5 ± 3.2 mm anterior and distal to the lateral epicondyle. The LPFL demonstrated significant shortening, especially in the first 45° of flexion (7.5 ± 5.1 mm). In contrast, the LPTL (5.5 ± 3.0 mm) and LPML (10.0 ± 3.3 mm) demonstrated significant shortening from 45° to 90°. On lateral radiographs, the center of the femoral attachment of the LPFL was a mean total distance of 19.2 ± 7.2 mm from the lateral epicondyle. CONCLUSION: The most important findings of this study were the correlative anatomy of 3 distinct lateral patellar ligaments (LPFL, LPML, and LPTL) and their anisometry through flexion. All 3 components demonstrated significant shortening during flexion. The quantitative and radiographic measurements detailed the LPFL osseous attachment on the patella; soft tissue attachment on the patellar tendon; and finally, the osseous insertion on the femur distal and anterior to the lateral epicondyle. Similarly, the authors documented the meniscal insertion of the LPML and defined a patellar insertion of the LPTL and LPML as a single attachment. These data allow for reproducible landmarks to aid in the understanding and reconstruction of the lateral patellar restraints. CLINICAL RELEVANCE: The data produced from this investigation provide a comprehensive description of these 3 lateral patellar stabilizers (LPFL, LPML, LPTL). These data can be used intraoperatively to facilitate anatomic reconstructions of the lateral patellar stabilizers.

Asunto(s)

RESUMEN

This study aimed to address whether the anthropometric features of the patella can be used to determine the sex of the individuals on the basis of the skeletal remains and to set limit values for anthropometric measurements and indicators of the patella in relation to each sex. 71 patellas (32 female and 39 male) from the Middle Ages from Wroclaw, Poland, were analyzed. The measurements (the greatest height, width, thickness, width of the lateral and medial joint surface and the height of these joint surfaces) and ratios were calculated (height to width, height to thickness as well as width to height of lateral and medial joint surfaces) and tested according to sexual dimorphism. The best parameter in terms of discriminatory assessment was the patella's highest height, which made it possible to classify the sex in 46.5% of cases. However, an index of the sum of the height, width and thickness measurements seems to be even better for differentiating between the sexes, making it possible to correctly classify the sex in 49.3% of cases. Due to some limitations of this study and the need of population-specific standard, it is recommend to employ the patella in sex determination only in cases of fragmented human remains and when no other method can be applied. Further investigation of possible factors influencing the variability of its size and shape should be explored in larger and geographically more diverse samples, and this could contribute to forensic, clinical, anatomical, and anthropological studies in this body part.

Asunto(s)

RESUMEN

The patella is the largest sesamoid bone of the skeleton. It is strongly involved in the knee, improving output force and velocity of the knee extensors, and thus plays a major role in locomotion and limb stability. However, the relationships between its structure and functional constraints, that would enable a better understanding of limb bone functional adaptations, are poorly known. This contribution proposes a comparative analysis, both qualitative and quantitative, of the microanatomy of the whole patella in perissodactyls, which show a wide range of morphologies, masses, and locomotor abilities, in order to investigate how the microanatomy of the patella adapts to evolutionary constraints. The inner structure of the patella consists of a spongiosa surrounded by a compact cortex. Contrary to our expectations, there is no increase in compactness with bone size, and thus body size and weight, but only an increase in the tightness of the spongiosa. No particular thickening of the cortex associated with muscle insertions is noticed but a strong thickening is observed anteriorly at about mid-length, where the strong intermediate patellar ligament inserts. The trabeculae are mainly oriented perpendicularly to the posterior articular surface, which highlights that the main stress is anteroposteriorly directed, maintaining the patella against the femoral trochlea. Conversely, anteriorly, trabeculae are rather circumferentially oriented, following the insertion of the patellar ligament and, possibly also, of the quadriceps tendon. A strong variation is observed among perissodactyl families but also intraspecifically, which is in accordance with previous studies suggesting a higher variability in sesamoid bones. Clear trends are nevertheless observed between the three families. Equids have a much thinner cortex than ceratomorphs. Rhinos and equids, both characterized by a development of the medial border, show an increase in trabecular density laterally suggesting stronger stresses laterally. The inner structure in tapirs is more homogeneous despite the absence of medial development of the medial border with no "compensation" of the inner structure, which suggests different stresses on their knees associated with a different morphology of their patellofemoral joint.

Asunto(s)

RESUMEN

Sex estimation is essential for forensic scientists to identify human skeletal remains. However, the most sexually dimorphic elements like pelvis or skull are not always assessable. Osteometric analyses have proven useful in sex estimation, but also to be population specific. The main purpose of this study was to test the validity of contemporary Greek and Spanish discriminant functions for the talus and the patella, respectively, on a Swiss skeletal sample and to quantify the utility of the measurements as a novel approach in osteometric sex assessment. Four talus and three patella measurements on dry bone were obtained from 234 individuals of the modern cemetery SIMON Identified Skeletal Collection. The previously derived discriminant functions were applied, accuracies determined, the utility of the different measurements was assessed and new multivariable equations constructed. Accuracies varied between 67% and 86% for talus and 63% and 84% for patella, similar to those reported by the original studies. Multivariable equations should be preferred over equations based on single measurements and combining the most significant measurements rather than using several variables obtained the best possible accuracy. The new discriminant functions did not provide a substantial improvement to the original ones. The overall utility of talus and patella is limited, allowing sex estimation with sufficient certainty only in a small proportion of individuals. Discriminant functions developed in contemporary Greek or Spanish populations are in principle applicable also to Swiss contemporary populations. We recommend that at present existent studies of this type should be validated and tested rather than developing new formulas.

Asunto(s)