RESUMEN

This study aimed to assess the formation of nevirapine (NVP) co-amorphs systems (CAM) with different co-formers (lamivudine-3TC, citric acid-CAc, and urea) through combined screening techniques as computational and thermal studies, solubility studies; in addition to develop and characterize suitable NVP-CAM. NVP-CAM were obtained using the quench-cooling method, and characterized by differential scanning calorimetry (DSC), X-ray diffractometry (XRD), Fourier Transform Infrared Spectroscopy (FTIR), and polarized light microscopy (PLM), in addition to in vitro dissolution in pH 6.8. The screening results indicated intermolecular interactions occurring between NVP and 3TC; NVP and CAc, where shifts in the melting temperature of NVP were verified. The presence of CAc impacted the NVP equilibrium solubility, due to hydrogen bonds. DSC thermograms evidenced the reduction and shifting of the endothermic peaks of NVP in the presence of its co-formers, suggesting partial miscibility of the compounds. Amorphization was proven by XRD and PLM assays. In vitro dissolution study exhibited a significant increase in solubility and dissolution efficiency of NVP-CAM compared to free NVP. Combined use of screening studies was useful for the development of stable and amorphous NVP-CAM, with increased NVP solubility, making CAM promising systems for combined antiretroviral therapy.

Asunto(s)

RESUMEN

Aim: Benznidazole (BNZ), a class-II drug, is the primary treatment for Chagas disease, but its low aqueous solubility presents challenges in formulation and efficacy. Nanosuspensions (NS) could potentially address these issues.Methods: BNZ-NS were prepared using a simple, organic solvents-free nano-milling approach. Physicochemical characterizations were conducted on both NS and lyophilized solid-state BNZ-nanocrystals (NC).Results: BNZ-NS exhibited particle size <500 nm, an acceptable polydispersity index (0.23), high Z-potential, and physical stability for at least 90 days. BNZ-NC showed tenfold higher solubility than pure BNZ. Dissolution assays revealed rapid BNZ-NS dissolution. BNZ-NC demonstrated biocompatibility on an eukaryotic cell and enhanced BNZ efficacy against trypomastigotes of Trypanosoma cruzi.Conclusion: BNZ-NS offers a promising alternative, overcoming limitations associated with BNZ for optimized pharmacotherapy.

[Box: see text].

Asunto(s)

RESUMEN

Moisture activated dry granulation (MADG) is an attractive granulation process. However, only a few works have explored modified drug release achieved by MADG, and to the best of the authors knowledge, none of them have explored gastroretention. The aim of this study was to explore the applicability of MADG process for developing gastroretentive placebo tablets, aided by SeDeM diagram. Floating and swelling capacities have been identified as critical quality attributes (CQAs). After a formulation screening step, the type and concentration of floating matrix formers and of binders were identified as the most relevant critical material attributes (CMAs) to investigate in ten formulations. A multiple linear regression analysis (MLRA) was applied against the factors that were varied to find the design space. An optimized product based on principal component analysis (PCA) results and MLRA was prepared and characterized. The granulate was also assessed by SeDeM. In conclusion, granulates lead to floating tablets with short floating lag time (<2 min), long floating duration (>4 h), and showing good swelling characteristics. The results obtained so far are promising enough to consider MADG as an advantageous granulation method to obtain gastroretentive tablets or even other controlled delivery systems requiring a relatively high content of absorbent materials in their composition.

Asunto(s)

RESUMEN

Fenbendazole is an antiparasitic drug widely used in veterinary medicine to treat parasitic infections caused in animals like cattle, horses, sheep, and dogs. Recently, it has been repositioned as a potential alternative for cancer treatment. However, it is a highly hydrophobic molecule (0.9 ug/mL), which can compromise its dissolution rate and absorption. Thus, this work aimed to apply a nanotechnological approach to improve drug solubility and dissolution performance. Fenbendazole nanoparticles stabilized by different poloxamers were obtained by lyophilization without cryoprotectants. The behavior of the drug in the solid state was analyzed by X-ray diffractometry, differential scanning calorimetry, and infrared spectroscopy. The nanosystems were also evaluated for solubility and dissolution rate. A long-term stability evaluation was performed for three years at room temperature. The yields of the lyophilization ranged between 75 and 81% for each lot. The nanoparticles showed a submicron size (< 340 nm) and a low polydispersity depending on the stabilizer. The physicochemical properties of the prepared systems indicated a remarkable amorphization of the drug, which influenced its solubility and dissolution performance. The drug dissolution from both the fresh and aged nanosystems was significantly higher than that of the raw drug. In particular, nanoparticles prepared with poloxamer 407 showed no significant modifications in their particle size in three years of storage. Physical stability studies indicated that the obtained systems prepared with P188, P237, and P407 suffered certain recrystallization during long storage at 25 °C. These findings confirm that selected poloxamers exhibited an important effect in formulating fenbendazole nanosystems with improved dissolution.

Asunto(s)

RESUMEN

Acne affects most of the world's population, causing an impact on the self-esteem of adolescents and young adults. One of the causes is the presence of the bacteria Cutibacterium acnes which are part of the natural microbiota of the skin. Topical treatments consist of anti-inflammatory and antibiotics, which could select resistant strains. Alternatives to the antibiotic are biocomposites that have antimicrobial activity like biosurfactants which are produced by bacteria. An innovative way of applying these compounds is bioadhesive polymeric films that adhere to the skin and release the active principle topically. Rhamnolipids have great potential to be used in the treatment of acne because they present antimicrobial activity against C. acnes in low and safe concentrations (MIC of 15.62 µg/mL, CBM of 31.25 µg/mL and CC50 of 181.93 µg/mL). Four films with different rhamnolipids concentrations (0.0; 0.1; 0.2; and 0.3%, w/w) were obtained as to visual appearance, mass variation, thickness, density, solubility, pH, water vapor transmission, mechanical properties (folding endurance, bioadhesion strength, tensile strength, elongation at break and Young's modulus), scanning electron microscopy and infrared. The results show that these formulations had a homogeneous appearance; elastic mechanical properties; pH similar to human skin and bioadhesive. The polymeric films containing rhamnolipids were effective against C. acnes, in the in vitro test, at the three concentrations tested, the film with the highest concentration (0.3%, w/w) being the most promising for presenting the highest antimicrobial activity. Thus, the polymeric film containing rhamnolipids has the potential to be used in the treatment of acne.

Asunto(s)

RESUMEN

OBJECTIVE: This work aims to present a Quality-by-Design (QbD) step-by-step methodology to formulate anti-ulcer and gastro-protective oral suspensions. METHODS: Sucralfate was used as a drug model. The Quality Target Product Profile was established early during preformulation. Viscosity, resuspendability, pH, and density were assessed through the screening of several suspension platforms based on different prototype compositions. A compatibility study between the active pharmaceutical ingredient and the excipients was performed by thermal analysis and infrared spectroscopy. An Ishikawa fishbone diagram and Failure Mode and Effect Analysis were employed to identify the Critical Material Attributes (CMAs), Critical Process Parameters (CPPs), and Critical Quality Attributes (CQAs). CMAs' and CPPs' impact on identified CQAs was further assessed through a 22 full factorial experimental design at normal conditions after manufacture and one month at super-accelerated stress conditions. Results: The lead prototype exhibited no physicochemical incompatibilities. The risk assessment tools revealed that the concentration of the wetting agent and the total concentration of thickening agents represented critical factors for the quality profile of the preparation in terms of viscosity. The optimized formulation comprising 1.125 w/v% total concentration of Natrosol 250 HX and Avicel RC 591 exhibited an enhanced performance according to the established profile. CONCLUSIONS: The analytical and physicochemical tests showed the robustness and compliance of the final preparation with the quality profile. The proposed step-by-step methodology based on QbD, Design of Experiments, and Quality Risk Management presented in our research holds practical implications for local industries and formulation scientists involved in the development of oral suspensions.

Asunto(s)

Asunto(s)

RESUMEN

3D printing technology is revolutionizing pharmaceuticals, offering tailored solutions for solid dosage forms. This innovation is particularly significant for conditions like Chagas disease, which require weight-dependent treatments. In this work, a formulation of benznidazole (BNZ), the primary treatment for this infection, was developed to be utilized with the Melting Solidification Printing Process (MESO-PP) 3D printing technique. Considering the limited aqueous solubility of BNZ, an interpolyelectrolyte complex (IPEC), composed of chitosan and pectin, was integrated to improve its dissolution profile. The formulations, also called inks in this context, with and without IPEC were integrally characterized and compared. The printing process was studied, the release of BNZ from 3D-prints (3DP) was exhaustively analyzed and a physiologically based pharmacokinetic model (PKPB) was developed to forecast their pharmacokinetic performance. 3DP were successfully achieved loading 25, 50 and 100 mg of BNZ. The presence of the IPEC in the ink caused a decrease in the crystalline domain of BNZ and facilitated the printing process, reaching a print success rate of 83.3 %. Interestingly, 3DP-IPEC showed accelerated release dissolution profiles, releasing over 85 % of BNZ in 90 min, while 3DP took up to 48 h for doses above 25 mg. The PBPK model demonstrated that 3DP-IPEC tablets would present high bioavailability (0.92), higher than 3DP (0.36) and similar to the commercial product. This breakthrough holds immense potential for improving treatment outcomes for neglected diseases.

Asunto(s)

RESUMEN

The success of obtaining solid dispersions for solubility improvement invariably depends on the miscibility of the drug and polymeric carriers. This study aimed to categorize and select polymeric carriers via the classical group contribution method using the multivariate analysis of the calculated solubility parameter of RX-HCl. The total, partial, and derivate parameters for RX-HCl were calculated. The data were compared with the results of excipients (N = 36), and a hierarchical clustering analysis was further performed. Solid dispersions of selected polymers in different drug loads were produced using solvent casting and characterized via X-ray diffraction, infrared spectroscopy and scanning electron microscopy. RX-HCl presented a Hansen solubility parameter (HSP) of 23.52 MPa1/2. The exploratory analysis of HSP and relative energy difference (RED) elicited a classification for miscible (n = 11), partially miscible (n = 15), and immiscible (n = 10) combinations. The experimental validation followed by a principal component regression exhibited a significant correlation between the crystallinity reduction and calculated parameters, whereas the spectroscopic evaluation highlighted the hydrogen-bonding contribution towards amorphization. The systematic approach presented a high discrimination ability, contributing to optimal excipient selection for the obtention of solid solutions of RX-HCl.

Asunto(s)

RESUMEN

The difficulty in swallowing is a frequent problem when oral solid dosage forms (conventional tablets or capsules) are administered to paediatric population or patients with dysphagia. An interesting alternative to overcome these problems are non-conventional formulations like chewable gels, commonly known as 'gummies'. Therefore, this work addresses the design, development and characterization of gummies using gelatine and pectin, for the vehiculization of the antiarrhythmic amiodarone (AMIO). Applying a Design of Experiments (DoE) approach, four gelatine (GG1-GG4) and eight pectin formulations (PG1-PG8) were developed. Considering the obtained results for responses during DoE evaluation (i.e., volume, syneresis, hardness, and gumminess), GG3 and PG8 were selected for complete characterization. Water activity, pH, drug content, texture parameters (adhesiveness, springiness, cohesiveness, and fracturability), disintegration time, in vitro dissolution, and microbiological features were evaluated. The obtained results were within the expected values for this type of formulation. The dissolution profiles showed a 94 % - 99 % of the AMIO content released for GG3 and PG8, respectively, so they could be considered suitable as immediate release dosage forms. In conclusion, the chewable gels were successfully developed and characterised, suggesting a potential means to accomplish a final prototype for the improvement of congenital cardiopathies treatment.

Asunto(s)

RESUMEN

This feasibility study evaluates a cleaning process designed to avoid the use of detergents and reduce operator exposure to the active pharmaceutical ingredient (API). The continuous manufacturing equipment was cleaned using excipients to displace ibuprofen residues from the system. The cleaning process was performed using 3.0 kg of Prosolv® and 3.0 kg of Tablettose® 70. The impact of different volumetric feed rates of the cleaning excipient was assessed. The displacement of API and blend residues was evaluated with in-line near infrared (NIR) spectroscopy. Principal component analysis (PCA) was performed to evaluate the cleaning progress as the Prosolv® flowed through the feeder, mixer and stream sampler. In-place Raman spectra were acquired from the material sticking to detect the ibuprofen residues. The study showed that Prosolv® and Tablettose® can remove ibuprofen residues effectively from the hopper, feeder screw, mixer paddles, shaft and stream sampler. The Process Analytical Technology (PAT) system can be utilized to detect API displacement during the cleaning process. However, dismantling and manual cleaning was required to remove material sticking at the surfaces adjacent to the rotating feeder screws and mixer paddles.

Asunto(s)

RESUMEN

The challenge of low water solubility in pharmaceutical science profoundly impacts drug absorption and therapeutic effectiveness. Nanocrystals (NC), consisting of drug molecules and stabilizing agents, offer a promising solution to enhance solubility and control release rates. In the pharmaceutical industry, top-down techniques are favored for their flexibility and cost-effectiveness. However, increased solubility can lead to premature drug dissolution in the stomach, which is problematic due to the acidic pH or enzymes. Researchers are exploring encapsulating agents that facilitate drug release at customized pH levels as a valuable strategy to address this. This study employed wet milling and spray drying techniques to create encapsulated NC for delivering the drug to the intestinal tract using the model drug ivermectin (IVM). Nanosuspensions (NS) were efficiently produced within 2 h using NanoDisp®, with a particle size of 198.4 ± 0.6 nm and a low polydispersity index (PDI) of 0.184, ensuring uniformity. Stability tests over 100 days at 4 °C and 25 °C demonstrated practical viability, with no precipitation or significant changes observed. Cytotoxicity evaluations indicated less harm to Caco-2 cells compared to the pure drug. Furthermore, the solubility of the NC increased by 47-fold in water and 4.8-fold in simulated intestinal fluid compared to the pure active compound. Finally, dissolution tests showed less than 10% release in acidic conditions and significant improvement in simulated intestinal conditions, promising enhanced drug solubility and bioavailability. This addresses a long-standing pharmaceutical challenge in a cost-effective and scalable manner.

Asunto(s)

RESUMEN

Among all the neglected diseases, schistosomiasis is considered the second most important parasitic infection after malaria. Praziquantel is the most widely used drug for this disease, but its exclusive use may result in the development of drug-resistant schistosomiasis. To increase the control of the disease, new drugs have been developed as alternative treatments, among them 2-(-5-bromo-1-h-indole-3-yl-methylene)-N-(naphthalene-1-ylhydrazine-carbothiamide (LQIT/LT-50), which showed promising schistosomicidal activity in nonclinical studies. However, LQIT/LT-50 presents low solubility in water, resulting in reduced bioavailability. To overcome this solubility problem, the present study aimed to develop LQIT/LT-50 solid dispersions for the treatment of schistosomiasis. Solid dispersions were prepared through the solvent method using Soluplus©, polyethylene glycol (PEG) or polyvinylpyrrolidone (PVP K-30) as hydrophilic carriers. The formulations with the best results in the compatibility tests, aqueous solubility and preliminary stability studies have undergone solubility tests and physicochemical characterizations by Fourier-transform infrared spectroscopy (FTIR), x-ray diffractometry (XRD), exploratory differential calorimetry (DSC), thermogravimetry (TG) and Raman spectroscopy. Finally, the schistosomicidal activity was evaluated in vitro. The phycochemical analyzes showed that when using PVP K-30, there was an interaction between the PVP K-30 and LQIT/LT-50, proving the successful development of the solid dispersion. Furthermore, an increase in the solubility of the new system was observed (LQIT/LT-50:PVP K-30) in addition to the improvement in the in vitro shistosomidal activity at 1:4 (w/w) molar ratio (i.e., 20% drug loading) when compared to LQIT/LT-50 alone. The development of the LQIT/LT-50:PVP K-30 1:4 solid dispersion is encouraging for the future development of new pharmaceutical solid formulations, aiming the schistosomicidal treatment.

Asunto(s)

RESUMEN

Pterostilbene (PTS) is a drug candidate with low water solubility and poor bioavailability. On the other hand, drug:cyclodextrins complexes frequently provide bulk powders with low drug concentrations, which is crucial for obtention solid or semi-solid pharmaceutical dosage forms. In order to determine the optimal conditions for enhancing the solubility of PTS:BCD (ß-cyclodextrin) complex, a Box-Behnken design was performed. Although the optimal conditions have been applied, low complexation efficiency (0.127) and the bulk powder remained. A PTS:BCD:HPMC (HPMC, hydroxypropyl methylcellulose) ternary system was developed to overcome this limitation, comparing two media, water and a mixture of ethanol-water. When ethanol was used as a co-solvent, the PTS:BCD:HPMC ternary system (freeze-dried) contained 116.65 ± 1.40 mg/g of PTS. This value was 3.4-fold higher than the PTS content observed when the same ternary system was obtained in aqueous media (34.8 mg/g) and 2.8-fold higher than the PTS content observed for PTS:BCD complex (freeze-dried) obtained using ethanol as a co-solvent. Dissolution tests revealed that after 120 min, in a buffer with a pH value of 1.2, only 43% of PTS dissolved. In contrast, 80% and 90% of PTS were dissolved from the PTS:BCD complex and PTS:BCD:HPMC ternary system, respectively. Moreover, the dissolution was fast in a buffer with a pH value of 6.8. PTS:BCD complex reached the maximum PTS dissolution at 75 min and PTS:BCD:HPMC at 45 min. In summary, the results of this study demonstrated, for the first time, that low-bulk powders with a high content of PTS can be obtained from PTS:BCD:HPMC ternary systems using ethanol as a co-solvent. This new finding offers a valuable alternative for producing solid or semi-solid formulations containing highly soluble PTS.

Asunto(s)

RESUMEN

Praziquantel is the only available drug to treat schistosomiasis, a parasitic disease that currently infects more than 240 million people globally. Due to increasing concerns about resistance and inadequate efficacy there is a need for new therapeutics. In this study, a series of 17 pyrazolines (15-31) and three pyrazoles (32-34) were synthesized and evaluated for their antiparasitic properties against ex vivo adult Schistosoma mansoni worms. Of the 20 compounds tested, six had a 50% effective concentration (EC50) below 30 µM. Our best hit, pyrazoline 22, showed promising activity against adult schistosomes, with an EC50 < 10 µM. Additionally, compound 22 had low cytotoxicity, with selectivity index of 21.6 and 32.2 for monkey and human cell lines, respectively. All active pyrazolines demonstrated a negative effect on schistosome fecundity, with a marked reduction in the number of eggs. Structure-activity relationship analysis showed that the presence of the non-aromatic heterocycle and N-substitution are fundamental to the antischistosomal properties. Pharmacokinetics, drug-likeness and medicinal chemistry friendliness studies were performed, and predicted values demonstrated an excellent drug-likeness profile for pyrazolines as well as an adherence to major pharmaceutical companies' filters. Collectively, this study demonstrates that pyrazoline derivatives are promising scaffolds in the discovery of novel antischistosomal agents.

Asunto(s)

RESUMEN

While theophylline has been extensively studied with multiple polymorphs discovered, there is still currently no conclusive structure for the metastable theophylline form III. In this present work, by combining more widely used techniques such as X-ray diffraction and thermogravimetric analysis with more emerging techniques like low-frequency Raman and terahertz time-domain spectroscopy, to analyze the structure and dynamics of a crystalline system, it was possible to provide further evidence that the form III structure has a theophylline monohydrate structure with the water molecules removed. Solid-state density functional theory simulations were paramount in proving that this proposed structure is correct and explain how vibrational modes within the crystal structures feature and govern polymorphic transitions and the metastable form III. Through the insight provided by both simulated and experimental results, it was possible to decisively conclude the elusive crystal structure of theophylline form III. It was also shown that the correct space group for theophylline monohydrate is not P21/n but, in fact, Pc.

Asunto(s)

RESUMEN

Chagas disease is a neglected tropical disease caused by the flagellate protozoan Trypanosoma cruzi (T. cruzi). Endemic in underdeveloped and developed countries, due to the migratory movement, it is considered a serious public health problem. Endemic in underdeveloped countries and due to the migratory movement, in developed countries as well, it is considered a serious public health problem. One of the reasons for this is a weak therapeutic arsenal, represented only by the drug benznidazole (BNZ) which, although it promotes significant cure rates in the acute phase of the disease, presents serious problems of toxicity and bioavailability, mainly due to its low aqueous solubility. Several studies have presented several drug delivery systems (DDS) based on BNZ aiming at enhancing its solubility in aqueous medium and, with this, promoting an increase in the dissolution rate and, consequently, in its bioavailability. However, the present work is a pioneer in using a zeolitic imidazolate framework as a carrier agent for a DDS in order to promote a pH-sensitive modulation of the drug. Thus, this work aimed to develop a novel DDS based on BNZ and the ZIF-8 to use it in development of prolonged-release dosage forms to alternative treatment of Chagas disease. The BNZ@ZIF-8 system was obtained through an ex situ method selected due to its higher incorporation efficiency (38%). Different characterization techniques corroborated the obtainment and drug release data were analyzed by in vitro dissolution assay under sink and non-sink conditions and setting the kinetic results through both model dependent and independent methods. Under sink conditions, at pH 4.5, BNZ and BNZ@ZIF-8 showed similar release profile, but the DDS was effective in promoting a prolonged release. At pH 7.6, after 7 h, BNZ showed a lower release than BNZ@ZIF-8. On the other hand, in non-sink conditions at pH 4.5 the BNZ presented 80% of drug release in 3 h, while the DDS in 6 h. At pH 7.6, BNZ presented a release of 80% in 2 h, while the DDS reaches it in only at 12 h. Therefore, at pH 4.5 the DDS BNZ@ZIF-8 showed a faster release with a burst effect, while at pH 7.6 it showed a prolonged and controlled release. Finally, it is evident that a promising DDS pH-sensitive was obtained as a novel carrier that might be able to prolongs BNZ release in dosage forms intended for the alternative treatment of Chagas disease.

Asunto(s)

RESUMEN

Spray-dried extracts are prepared as powders or granules after solvent removal, which can be obtained in the presence or absence of pharmaceutical adjuvants. This work aimed to optimize the process of obtaining dried extracts of Peperomia pellucida L. (HBK) by spray drying. The characterization of the extract was performed by thermal analysis, specific surface area, particle size and high performance liquid chromatography (HPLC); then, capsules were developed for antimicrobial treatment, evaluating four bench lots by the determination of the angle of repose and time of flow, scanning electron microscopy, porosity and physicochemical quality control. There were no significant differences between the extracts obtained by spray drying at atomization temperatures of 140 °C, 160 °C and 180 °C, which was confirmed by thermal analysis. Specific surface area varied inversely with the mean particle size. Regarding the marker content by HPLC, no significant differences were found between the samples, although the flavonoid fraction was more stable at 160 °C. Bench lots (I to IV) were developed using the diluents Flowlac®, Starch® 1500, microcrystalline cellulose 250 and Cellactose® 80. Based on the results, the bench lot I, containing Flowlac®, was selected. The results of physicochemical quality control demonstrated that the selected formulation meets the pre-established parameters, and proving to be economically viable.

Asunto(s)

RESUMEN

Amano lipase AK from P. fluorescens was immobilized on different types of chitosan-containing supports. Chitosan lower molecular weight (2.5%), chitosan lower molecular weight/sodium alginate (2.5%/2.5%) and chitosan lower molecular weight/carrageenan (2.5%/2.5%) allowed the highest values of immobilization yields (IY) of 81, 81 and 83%, respectively. Best activity results were achieved using chitosan average molecular weight (5%) and chitosan lower molecular weight/sodium alginate (2.5%/2.5%) as support, with values of 1.40 and 1.30 UpNPB/ggel and with recovery activities of 45.75 and 35.6%, respectively. These derivatives were evaluated in the kinetic resolution of rac-indanol to obtain a key intermediate in the synthesis of a drug used in the treatment of Parkinson's disease. The most efficient derivatives in the kinetic resolution were lipase immobilized on chitosan average molecular weight (5.0%) and chitosan low molecular weight/sodium alginate, the latter leading to obtaining both (S)-indanol and (R)-indanyl acetate with > 99% ee and 50% conversion.

Asunto(s)

RESUMEN

AIMS: Evaluate the effect of varying the droplet size of microspheres charged with thyme essential oil (TEO-MS) on their swelling (Sw), release rate (%RR) and in vitro antifungal activity against Saprolegnia sp. METHODS: TEO-MS obtained by ionic gelation were characterised through SEM microscopy and X-ray microtomography. Their Sw and RR% were evaluated at simulated fish-gastrointestinal conditions using gravimetric and spectrophotometric techniques. RESULTS: For all evaluated droplet sizes (p ≥ 0.05), TEO was heterogeneously distributed inside of the MS and TEO-MS experimented agglomeration and sphericity loss after the drying process. Under gastric conditions, the acid pH (2.9) limited the Sw (50-100%) of TEO-MS, generating a low RR% (14-18%). Contrary, the slightly alkaline intestinal pH (8.1) favoured the Sw (∼3.2 to 3.8 times) and therefore the RR% (42-63%). CONCLUSIONS: TEO-MS (5-100 mg/mL) presented antifungal capacity onto Saprolegnia sp. after the simulated fish digestion, being the small droplet size once the most effective.

Asunto(s)