RESUMEN

Introdução: A longa hospitalização dos neonatos na Unidade de Terapia Intensiva Neonatal tem como consequência o aumento dos riscos de alterações posturais devido ao tempo prolongado dentro de incubadoras e berços. O objetivo do estudo foi desenvolver um dispositivo para promover uma alternativa de mudança de decúbito denominada Cadeira Terapêutico Neonatal. Métodos: Estudo qualitativo e descritivo de desenvolvimento e produção, aprovado pelo Comitê de Ética em Pesquisa com o no 17-0254 e constituído por três etapas: desenvolvimento e confecção do protótipo; avaliação da aplicabilidade do protótipo por meio de um questionário de aplicabilidade, após transcorridos 10 minutos do posicionamento funcional; e definição do modelo e solicitação do pedido de invenção pelo Instituto Nacional de Propriedade Industrial (INPI). Resultados: Foram desenvolvidos e confeccionados dois modelos de protótipos de Cadeira Terapêutica Neonatal. Vinte e oito colaboradores da equipe assistencial responderam ao questionário: 82% consideram muito bom na avaliação no grau de conforto e adaptação do neonato; 96% avaliaram como muito fácil de realizar o processo de higienização. Onze (39,28%) colaboradores sugeriram promover medidas de melhorias no cinto de segurança. Definiu-se o modelo do invento e foi feita a inserção do pedido sob o número BR 20.2020.005865 2 no INPI. Conclusão: O modelo proposto promoveu uma alternativa de mudança de postura, tendo como característica a aplicabilidade e a usabilidade. (AU)

Introduction: The long hospitalization of neonates in the Neonatal Intensive Care Unit has the consequence of increasing the risks of postural changes due to the prolonged time inside incubators and cradles. The aim of the study was to develop a device to promote an alternative for changing the decubitus position called "Neonatal Therapy Chair". Methods: Qualitative and descriptive study of development and production, approved Human Research Protection Office number 17-0254 ­ consisting of three stages: Stage 1- development and making of the prototype; Step 2- evaluation of the applicability of the prototype through an Applicability Questionnaire, after 10 minutes of functional positioning; Stage 3- definition of the model and request for an invention request by the NIIP (National Institute of Industrial Property). Results: Stage 1: two prototype. Stage 2: Twenty-eight employees of the assistance team answered the questionnaire: 82% consider it very good in assessing the degree of comfort and adaptation of the newborn; 96% rated it as very easy to carry out the cleaning process. Eleven (39.28%) employees suggested promoting measures to improve seat belts. Step 3: definition of the model of the invention and insertion of the order under number BR 20 2020 005865 2 at NIIP. (AU)

Asunto(s)

RESUMEN

Abstract Objectives Positioning during endotracheal intubation (ETI) is critical to ensure its success. We aimed to determine if the ramping position improved laryngeal exposure and first attempt success at intubation when compared to the sniffing position. Methods PubMed, EMBASE, and Cochrane CENTRAL databases were searched systematically from inception until January 2020. Our primary outcomes included laryngeal exposure as measured by Cormack-Lehane Grade 1 or 2 (CLG 1/2), CLG 3 or 4 (CLG 3/4), and first attempt success at intubation. Secondary outcomes were intubation time, use of airway adjuncts, ancillary maneuvers, and complications during ETI. Results Seven studies met our inclusion criteria, of which 4 were RCTs and 3 were cohort studies. The meta-analysis was conducted by pooling the effect estimates for all 4 included RCTs (n = 632). There were no differences found between ramping and sniffing positions for odds of CLG 1/2, CLG 3/4, first attempt success at intubation, intubation time, use of ancillary airway maneuvers, and use of airway adjuncts, with evidence of high heterogeneity across studies. However, the ramping position in surgical patients is associated with increased likelihood of CLG 1/2 (OR = 2.05, 95% CI 1.26 to 3.32, p = 0.004) and lower likelihood of CLG 3/4 (OR = 0.49, 95% CI 0.30 to 0.79, p = 0.004), moderate quality of evidence. Conclusion Our meta-analysis demonstrated that the ramping position may benefit surgical patients undergoing ETI by improving laryngeal exposure. Large scale well designed multicentre RCTs should be carried out to further elucidate the benefits of the ramping position in the surgical and intensive care unit patients.

Resumo Objetivos A posição do paciente durante a Intubação Traqueal (IT) é fundamental para o sucesso do procedimento. Nosso objetivo foi determinar se a posição de rampa melhorou a visualização laríngea e o êxito na primeira tentativa de intubação quando comparada à posição olfativa. Métodos Os bancos de dados PubMed, EMBASE e Cochrane CENTRAL foram pesquisados de forma sistemática a partir da data em que os bancos de dados foram estabelecidos até janeiro de 2020. Nossos desfechos primários incluíram a visualização laríngea avaliada como Cormack‐Lehane Grau 1 ou 2 (CLG 1/2), Cormack‐Lehane Grau 3 ou 4 (CLG 3/4) e o êxito na primeira tentativa de intubação. Os desfechos secundários foram o tempo de intubação, uso de dispositivos adjuvantes para manuseio de vias aéreas, manobras auxiliares e complicações durante a IT. Resultados Sete estudos preencheram nossos critérios de inclusão, dos quais 4 eram Estudos Clínicos Randomizados (ECR) e 3 eram estudos de coorte. A meta‐análise foi conduzida combinando as estimativas de efeito para todos os 4 ECR incluídos (n = 632). Não foram encontradas diferenças entre as posições de rampa e olfativa para razão de chances de CLG 1/2, CLG 3/4, sucesso na primeira tentativa de intubação, tempo de intubação, uso de manobras auxiliares das vias aéreas e uso de dispositivos adjuvantes de vias aéreas, havendo evidência de alta heterogeneidade nos estudos. No entanto, a posição de rampa em pacientes cirúrgicos está associada com maior probabilidade de CLG 1/2 (OR = 2,05; 95% IC 1,26 a 3,32; p = 0,004) e menor probabilidade de CLG 3/4 (OR = 0,49; 95% IC 0,30 a 0,79; p = 0,004), com qualidade moderada de evidência. Conclusão Nossa meta‐análise demonstrou que a posição de rampa pode beneficiar pacientes cirúrgicos submetidos a IT, melhorando a visualização laríngea. ECR multicêntricos bem projetados com amostras grandes devem ser realizados para esclarecer ainda mais os benefícios da posição de rampa nos pacientes cirúrgicos e na unidade de terapia intensiva.

Asunto(s)

RESUMEN

OBJECTIVE: To determine the test-retest repeatability of minimum rim width and retinal nerve fibre layer thickness measurements obtained by spectral-domain optical coherence tomography using the Anatomic Positioning System protocol in glaucoma patients and controls. Also, to assess the ability of the minimum rim width and retinal nerve fibre layer thickness to diagnose glaucoma in 2 circular peripapillary locations. METHODS: Spectral domain optical coherence tomography scans of the optic nerve head were obtained twice during the same visit using the Anatomic Positioning System eye-tracking protocol. The minimum rim width and retinal nerve fibre layer thickness were measured at 3 circular diameters (3.5 mm, 4.1 mm, and 4.7 mm). Intraclass correlation coefficients and area under the receiver operating characteristic were calculated for these parameters. RESULTS: A total of 36 glaucomatous eyes and 59 control eyes were included in the analysis. The intraclass correlation coefficients of minimum rim width and retinal nerve fibre layer thickness global measurement for 3.5 mm and 4.1 mm circles ranged between 0.98 and 1.00 and for 4.7 mm circle was between 0.76 and 1.00. The minimum rim width had an area under the receiver operating characteristic of 0.97, while the retinal nerve fibre layer thickness measurements had an area under the receiver operating characteristic of 0.95, 0.95, and 0.96 for the 3.5 mm, 4.1 mm, and 4.7 mm circles, respectively. CONCLUSIONS: The minimum rim width and retinal nerve fibre layer thickness measurements using the Anatomic Positioning System protocol had overall excellent reproducibility and diagnostic performance. Using this protocol and the novel minimum rim width parameter may be useful in more accurate diagnosis and follow-up of patients with glaucoma.

Asunto(s)

RESUMEN

OBJECTIVE: to evaluate the interface pressure (IP) of support surfaces (SSs) on bony prominences. METHOD: a quasi-experimental study with repeated measures on each SS. Twenty healthy adult volunteers participated in the study. The participants were placed in the supine position on a standard operating table for evaluation of IP on the bony prominences of the occipital, subscapular, sacral, and calcaneal regions using sensors. Seven evaluations were performed for each bony prominence: one on a standard operating table, and the others on tables containing SSs made of viscoelastic polymer, soft foam, or sealed foam. Descriptive statistics and analysis of variance were used to analyze the data. RESULTS: the mean IP was higher on the viscoelastic polymer-based SS compared to the other SSs (p<0.001). The mean IP was relatively lower on the density-33 sealed foam and density-18 soft foam. In addition, this variable was comparatively higher in the sacral region (42.90 mmHg) and the calcaneal region (15.35 mmHg). CONCLUSION: IP was relatively lower on foam-based SSs, especially on density-18 soft foam and density-33 sealed foam. Nonetheless, IP was not reduced on the viscoelastic polymer SS compared to the control SS.

Asunto(s)

RESUMEN

Abstract Objective: to evaluate the interface pressure (IP) of support surfaces (SSs) on bony prominences. Method: a quasi-experimental study with repeated measures on each SS. Twenty healthy adult volunteers participated in the study. The participants were placed in the supine position on a standard operating table for evaluation of IP on the bony prominences of the occipital, subscapular, sacral, and calcaneal regions using sensors. Seven evaluations were performed for each bony prominence: one on a standard operating table, and the others on tables containing SSs made of viscoelastic polymer, soft foam, or sealed foam. Descriptive statistics and analysis of variance were used to analyze the data. Results: the mean IP was higher on the viscoelastic polymer-based SS compared to the other SSs (p<0.001). The mean IP was relatively lower on the density-33 sealed foam and density-18 soft foam. In addition, this variable was comparatively higher in the sacral region (42.90 mmHg) and the calcaneal region (15.35 mmHg). Conclusion: IP was relatively lower on foam-based SSs, especially on density-18 soft foam and density-33 sealed foam. Nonetheless, IP was not reduced on the viscoelastic polymer SS compared to the control SS.

RESUMO Objetivo: valiar a pressão de interface (PI) das superfícies de apoio (SAs) em proeminências ósseas. Método: um estudo quase experimental com medidas repetidas em diferentes SAs. Vinte voluntários adultos saudáveis participaram do estudo. Os participantes foram colocados em decúbito dorsal em uma mesa cirúrgica para avaliação da PI nas proeminências ósseas das regiões occipital, subescapular, sacral e calcânea utilizando sensores. Sete avaliações foram realizadas para cada proeminência óssea: uma avaliação em uma mesa de operação padrão e as outras avaliações em mesas contendo SAs à base de polímero viscoelástico, espuma macia, ou espuma selada. Estatística descritiva e análise de variância foram utilizadas para analisar os dados. Resultados: a PI média foi maior na SA feita de polímero viscoelástico em comparação com as outras SAs (p<0,001). A PI média foi relativamente menor na espuma selada de densidade 33 e na espuma macia de densidade 18. Além disso, essa variável foi comparativamente maior na região sacral (42,90 mmHg) e na região calcânea (15,35 mmHg). Conclusão: a PI foi menor em SAs à base de espuma, especialmente espuma macia de densidade 18 e espuma selada de densidade 33. No entanto, a PI não foi reduzida na SA à base de polímero viscoelástico comparado com a SA controle.

RESUMEN Objetivo: evaluar la presión de interfaz (PI) de las superficies de apoyo (SAs) en prominencias óseas. Método: un estudio casi experimental con medidas repetidas en diferentes SAs. Veinte voluntarios adultos saludables participaron del estudio. Los participantes fueron colocados en decúbito dorsal en una mesa quirúrgica para evaluación de la PI en las prominencias óseas de las regiones occipital, subescapular, sacra y calcánea utilizando sensores. Siete evaluaciones fueron realizadas para cada prominencia ósea: una evaluación en una mesa de operación estándar y otras evaluaciones en mesas que contenían SAs a base de polímero viscoelástico, espuma blanda, o espuma sellada. Fueron utilizadas la estadística descriptiva y el análisis de la varianza para analizar los datos. Resultados: la PI media fue mayor en la SA hecha de polímero viscoelástico en comparación con las otras SAs (p<0,001). La PI media fue relativamente menor en la espuma sellada de densidad 33 y en la espuma blanda de densidad 18. Además, esa variable fue comparativamente mayor en la región sacra (42,90 mmHg) y en la región calcánea (15,35 mmHg). Conclusión: la PI fue menor en SAs a base de espuma, especialmente espuma blanda de densidad 18 y espuma sellada de densidad 33. Sin embargo, la PI no fue reducida en la SA a base de polímero viscoelástico comparado con la SA control.

Asunto(s)

RESUMEN

Abstract Objective: To describe the performance of a non-fluoroscopic fixed-flexion PA radiographic protocol with a new positioning device, developed for the assessment of knee osteoarthritis (OA) in Brazilian Longitudinal Study of Adult Health Musculoskeletal Study (ELSA-Brasil MSK). Material and methods: A test–retest design including 19 adults (38 knee images) was conducted. Feasibility of the radiographic protocol was assessed by image quality parameters and presence of radioanatomic alignment according to intermargin distance (IMD) values. Repeatability was assessed for IMD and joint space width (JSW) measured at three different locations. Results: Approximately 90% of knee images presented excellent quality. Frequencies of nearly perfect radioanatomic alignment (IMD ≤1 mm) ranged from 29% to 50%, and satisfactory alignment was found in up to 71% and 76% of the images (IMD ≤1.5 mm and ≤1.7 mm, respectively). Repeatability analyses yielded the following results: IMD [SD of mean difference = 1.08; coefficient of variation (%CV) = 54.68%; intraclass correlation coefficient (ICC) (95%CI) = 0.59 (0.34–0.77)]; JSW [SD of mean difference = 0.34–0.61; %CV = 4.48%–9.80%; ICC (95%CI) = 0.74 (0.55–0.85)–0.94 (0.87–0.97)]. Adequately reproducible measurements of IMD and JSW were found in 68% and 87% of the images, respectively. Conclusions: Despite the difficulty in achieving consistent radioanatomic alignment between subsequent radiographs in terms of IMD, the protocol produced highly repeatable JSW measurements when these were taken at midpoint and 10 mm from the medial extremity of the medial tibial plateau. Therefore, measurements of JSW at these locations can be considered adequate for the assessment of knee OA in ELSA-Brasil MSK.

Resumo Objetivo: Descrever o desempenho de um protocolo radiográfico em flexão fixa sem fluoroscopia em incidência PA com um novo posicionador, desenvolvido para a avaliação da osteoartrite de joelho (OA) no estudo ELSA-Brasil ME. Material e métodos: Fez-se um estudo de teste e reteste que incluiu 19 adultos (38 imagens de joelho). A viabilidade do protocolo radiográfico foi avaliada por meio de parâmetros de qualidade da imagem e presença de alinhamento radioanatômico de acordo com as medidas da distância intermarginal (DIM). Avaliaram-se a repetibilidade dos valores de DIM e do espaço articular (EA) em três locais diferentes. Resultados: Aproximadamente 90% das imagens de joelho apresentaram uma qualidade excelente. As frequências de imagens com alinhamento radioanatômico quase perfeito (DIM<1mm) variaram de 29% a 50%, e de alinhamento satisfatório (DIM<1,5mm e <1,7mm) de 71% a 76%, respectivamente. As análises de repetibilidade produziram os seguintes resultados: DIM [DP da média das diferenças = 1,08; coeficiente de variação (% CV) = 54,68%; coeficiente de correlação intraclasse (CCI) (IC 95%) = 0,59 (0,34 a 0,77)]; EA [DP da média das diferenças = 0,34 a 0,61; % CV = 4,48% a 9,80%; CCI (IC 95%) = 0,74 (0,55 a 0,85) a 0,94 (0,87 a 0,97]. Encontraram-se medidas adequadamente reprodutíveis de DIM e EA em 68% e 87% das imagens, respectivamente. Conclusões: Apesar da dificuldade de obter um alinhamento radioanatômico consistente entre radiografias repetidas em termos de DIM, o protocolo produziu medições de EA altamente repetíveis quando essas foram tomadas no ponto médio e a 10 mm da extremidade medial do platô tibial medial. Portanto, as medidas de EA nesses locais podem ser consideradas adequadas para a avaliação da OA de joelho no estudo ELSA-Brasil ME.

Asunto(s)

RESUMEN

OBJECTIVE: To describe the performance of a non-fluoroscopic fixed-flexion PA radiographic protocol with a new positioning device, developed for the assessment of knee osteoarthritis (OA) in Brazilian Longitudinal Study of Adult Health Musculoskeletal Study (ELSA-Brasil MSK). MATERIAL AND METHODS: A test-retest design including 19 adults (38 knee images) was conducted. Feasibility of the radiographic protocol was assessed by image quality parameters and presence of radioanatomic alignment according to intermargin distance (IMD) values. Repeatability was assessed for IMD and joint space width (JSW) measured at three different locations. RESULTS: Approximately 90% of knee images presented excellent quality. Frequencies of nearly perfect radioanatomic alignment (IMD ≤1mm) ranged from 29% to 50%, and satisfactory alignment was found in up to 71% and 76% of the images (IMD ≤1.5mm and ≤1.7mm, respectively). Repeatability analyses yielded the following results: IMD [SD of mean difference=1.08; coefficient of variation (%CV)=54.68%; intraclass correlation coefficient (ICC) (95%CI)=0.59 (0.34-0.77)]; JSW [SD of mean difference=0.34-0.61; %CV=4.48%-9.80%; ICC (95%CI)=0.74 (0.55-0.85)-0.94 (0.87-0.97)]. Adequately reproducible measurements of IMD and JSW were found in 68% and 87% of the images, respectively. CONCLUSIONS: Despite the difficulty in achieving consistent radioanatomic alignment between subsequent radiographs in terms of IMD, the protocol produced highly repeatable JSW measurements when these were taken at midpoint and 10mm from the medial extremity of the medial tibial plateau. Therefore, measurements of JSW at these locations can be considered adequate for the assessment of knee OA in ELSA-Brasil MSK.

Asunto(s)

RESUMEN

Objetivo:Analisar a influência da posição corporal no deslocamento da pronga nasal em recém-nascidos pré-termos.Métodos:Estudo prospectivo, randomizado e tipo crossover. Foram estudados recém-nascidos com média de idade gestacional de 29,7±2 semanas, peso de nascimento de 1.353±280 g, 2,9±2,2 dias de vida e em uso da pressão positiva contínua de vias aéreas. Avaliou-se o número de vezes em que o dispositivo nasal sofreu deslocamento, além de variáveis cardiorrespiratórias, como frequência respiratória, cardíaca e saturação de oxigênio, conforme a criança foi alocada nas posições corporais prona, lateral direita, lateral esquerda e supina, segundo ordem aleatória previamente estabelecida. As informações em cada posição foram coletadas a cada 10 minutos, por 60 minutos. Foi considerada ocorrência quando o dispositivo nasal se deslocou do orifício das narinas, após o período de três minutos na posição desejada, e houve necessidade de intervenção do examinador.Resultados:Nas 16 crianças estudadas, o deslocamento do dispositivo nasal ocorreu nas posições prona (nove crianças - 56,2%) e lateral esquerda (duas crianças - 12,5%). A pronga se deslocou 11 vezes na posição prona, sete delas nos primeiros dez minutos, e duas vezes na posição lateral esquerda, uma nos primeiros dez minutos. Não se detectaram alterações clinicamente significativas nas variáveis cardiorrespiratórias.Conclusões:A posição prona mostrou maior dificuldade para se manter o dispositivo nasal de suporte pressórico não invasivo na forma adequada.

Objective:To evaluate the influence of body position on the displacement of nasal prongs in preterm infants.Methods:This prospective, randomized, crossover study enrolled infants born at a mean gestational age of 29.7±2 weeks, birth weight of 1353±280g and 2.9±2.2 days of life, submitted to continuous positive airway pressure by nasal prongs. The main outcome was the number of times that the nasal prongs were displaced following infant positioning in the following body positions: prone, right lateral, left lateral, and supine, according to a pre-established random order. Moreover, cardiorespiratory variables (respiratory rate, heart rate, and oxygen saturation) were evaluated for each body position. Data for each position were collected every 10 min, over a period of 60 min. An occurrence was defined when the nasal prongs were displaced from the nostrils after 3 min in the desired position, requiring intervention of the examiner.Results:Among the 16 studied infants, the occurrence of nasal prong displacement was only observed in the prone position (9 infants - 56.2%) and in the left lateral position (2 infants - 12.5%). The number of times that the prongs were displaced was 11 in the prone position (7 within the first 10min) and 2 in the left lateral position (1 within the first 10min). No clinically significant changes were observed in the cardiorespiratory variables.Conclusions:Maintenance of the nasal prongs to provide adequate noninvasive respiratory support was harder in the prone position.

Asunto(s)

RESUMEN

Extra-oral radiographs of dry skulls on scientific or forensic context have head position as a critical procedure. The aims of this article are to present a multi-purposed head-positioning device, and to describe the new method of image acquirement using the device to adequately keep the head in a correct and safe position during radiological or tomographic exam. The design was created from an average-sized skull and then tested in 20 others with different morphologies, sizes, weights, and structural state of preservation. A series of digital and analog orthopantomographies followed by a cone-beam computer tomography were obtained to assure that the correct positioning standards and anatomical visualization were achievable. The developed device properly kept adult skulls in position for all extra-oral radiographic exams, providing to operators a secure and facilitated way to achieve the proper position standards. The device did not impair the visualization of the anatomical structures neither on radiographs nor in cone-beam computer tomography.

Asunto(s)

RESUMEN

The aim of this study was to evaluate the influence of changes in maxillomandibular positioning during cone beam computed tomography (CBCT) imaging on the planning of dental implants. Ten skulls were marked bilaterally with metal spheres in four regions: incisors, canine, premolars, and molars. CBCT scans were obtained in seven positions: standard position (SP), displacements of 10° and 20° above and below the SP, and lateral displacements of 10° and 20° from the SP. Subsequently, bilateral measurements of the height and width of the maxilla and mandible were performed on all images. The results showed that the position with a displacement of 20° above the SP presented the greatest differences in the measurements of bone height and width. In the bilateral comparisons, the maxillary bone width showed the greatest differences, especially for the regions of the premolars and molars. It is concluded that alterations of positioning during the acquisition of CBCT images can lead to alterations in the measurements of bone height and width, which may result in errors in implant planning and cause damage to anatomical structures.

Asunto(s)

RESUMEN

We studied the effect of using the BodyFIX (Medical Intelligence Inc, Schwabmunchen, Germany) to immobilize children during a dual-energy X-ray absorptiometry scan on body composition and bone estimates. Overestimates of soft tissue and bone introduced by the BodyFIX were avoided by using a modified version of the system or were corrected by using mathematical models developed in this study.

Asunto(s)

RESUMEN

BACKGROUND: Outcome of Extracorporeal Shockwave Lithotripsy (SWL) is determined by physical factors that affect stone fragmentation and clearance. PURPOSE: To evaluate the predictive value of the Lithotripsy Table Height (LTH) in SWL outcome. Lithotripsy Table Height (LTH) is a variable that represents skin to therapy head distance, and it is proportional to the energy that reaches the stone. MATERIALS AND METHODS: A prospective study enrolled patients undergoing SWL for radiopaque urinary stones. All procedures were performed using a Modulith SLX (Karl Storz, Germany) Lithotripter. Patient weight, height and age; stone location and size; number of shock waves delivered, and LTH were recorded. One month post-procedure a KUB was obtained. Logistic regression analysis was used to evaluate the effects of these variables on stone-free outcome. A ROC curve was plotted. RESULTS: Fifty-six patients were enrolled. After one month follow-up, overall success rate (Stone Free) was 83.9% (n = 47). LTH was the only independent predictor of outcome in both univariate and multivariate analysis (p = 0.029). Stone size (p = 0.45) and BMI (p = 0.32) were not significant. In the ROC curve, LTH showed an Area under the Curve = 0.791. Patients with LTH < 218 (n = 8) had relative risk of residual stones = 7.5, odds Ratio: 6.6 (Stone free rate 37.5% vs. 91.5%). CONCLUSION: LTH appears to be an independent predictor of SWL outcome. High success rates can be expected if LTH > 218. Patients with lower LTH had a less effective therapy, therefore, worse stone fragmentation and clearance. These findings may help improve patient selection for SWL therapy.

Asunto(s)

RESUMEN

BACKGROUND: Outcome of Extracorporeal Shockwave Lithotripsy (SWL) is determined by physical factors that affect stone fragmentation and clearance. PURPOSE: To evaluate the predictive value of the Lithotripsy Table Height (LTH) in SWL outcome. Lithotripsy Table Height (LTH) is a variable that represents skin to therapy head distance, and it is proportional to the energy that reaches the stone. MATERIALS AND METHODS: A prospective study enrolled patients undergoing SWL for radiopaque urinary stones. All procedures were performed using a Modulith SLX (Karl Storz, Germany) Lithotripter. Patient weight, height and age; stone location and size; number of shock waves delivered, and LTH were recorded. One month post-procedure a KUB was obtained. Logistic regression analysis was used to evaluate the effects of these variables on stone-free outcome. A ROC curve was plotted. RESULTS: Fifty-six patients were enrolled. After one month follow-up, overall success rate (Stone Free) was 83.9 percent (n = 47). LTH was the only independent predictor of outcome in both univariate and multivariate analysis (p = 0.029). Stone size (p = 0.45) and BMI (p = 0.32) were not significant. In the ROC curve, LTH showed an Area under the Curve = 0.791. Patients with LTH < 218 (n = 8) had relative risk of residual stones = 7.5, odds Ratio: 6.6 (Stone free rate 37.5 percent vs. 91.5 percent). CONCLUSION: LTH appears to be an independent predictor of SWL outcome. High success rates can be expected if LTH > 218. Patients with lower LTH had a less effective therapy, therefore, worse stone fragmentation and clearance. These findings may help improve patient selection for SWL therapy.

Asunto(s)