RESUMEN
Subtle but demonstrable movements in the expectant mother's pelvis occur during vaginal delivery in all the pelvic joints and anatomical planes of the body (sagittal, frontal, and transverse). The purpose of these movements is to gradually expand the space in the lesser pelvis via widening of the individual pelvic planes so that the newborn's head can enter the pelvic inlet, safely pass through the narrow planes of the pelvis, and through the pelvic outlet. From the point of view of biomechanics, these movements are described in literature as counternutation and nutation of the sacrum and iliac bone. The counternutation of the sacrum helps to expand the plane of the pelvic inlet. The nutation of the sacrum assists in expanding the plane of the pelvic width, height, and outlet. These physiological movements are affected by the body constitution, the state of the myofascial and skeletal systems of the mother, and furthermore, by hormonal disjunction of the connections in the expectant mother's pelvis together with the progress of the delivery mechanism itself. The main factor that determines the range of movement in the individual joints, and therefore adequate expansion of the individual pelvic planes, is the position of the mother during delivery. Engagement of active movements of the mother together with application of passive stretching of the soft tissues in the lower lumbar area and in the hip joints are both needed for maximum expansion of the individual pelvic planes and utilization of the maximum useful capacity of the mother's pelvis during delivery. These movements help invoke the abduction forces on muscles, tendons, and ligaments in the pelvis that lead to the optimum setting of the joints during which delivery movements happen. The specific movements in the pelvic joints predetermine whether nutation or counternutation is possible, and therefore if the newborn's head can progress to the pelvic inlet or pass through the narrow and wide pelvic planes, and the pelvic outlet. The knowledge of these biomechanical principles and movements in the pelvis during delivery enables obstetricians and midwives to understand how the movements in the hip joints of the expectant mother can positively impact the spatial ratios in the lesser pelvis, and how to support further progress in the event of non-progressive labour.
Asunto(s)
Parto Obstétrico , Huesos Pélvicos , Humanos , Femenino , Embarazo , Parto Obstétrico/métodos , Huesos Pélvicos/fisiología , Fenómenos Biomecánicos , Movimiento/fisiologíaRESUMEN
Motor imagery (MI) is the mental representation of a movement without its execution. It activates internal representations of the movement without external stimulus through different memory-related processes. Although acute stress is frequent in the population and affects supraspinal structures essential for memory functionality, it is still unknown how that stress affects MI capacity and temporal congruence (TC) between execution and movement imagination. This study aimed to discover how acute stress may influence MI capacity and TC in the subscales of internal and external visual imagery and kinesthetic imagery. A double-blind, randomized trial was conducted. Sixty-two young, healthy subjects (mean age = 20.65 [2.54]; 39 females and 23 males) unfamiliar with the assessment and uses of MI were recruited. Participants were assigned by stratified randomization to the stress group or the control group. Stress was induced by the Maastricht Acute Stress Test (MAST), while the control group performed the MAST control protocol. MI capacity and TC were assessed before (t1) and after (t2) MAST stress or control using the Movement Imagery Questionnaire-3 (MIQ-3). Electrodermal activity and heart rate variability were further recorded as control variables to assess stress induction. Thirty subjects in the stress group and 26 subjects in the control group were analyzed. No significant group differences were observed when comparing MI capacity or TC in any subscales. These findings suggest that acute stress does not significantly affect MI capacity or TC in young, healthy, non-experienced MI subjects. MI could thus be a relevant helpful technique in stressful situations.
Asunto(s)
Frecuencia Cardíaca , Imaginación , Estrés Psicológico , Humanos , Femenino , Masculino , Adulto Joven , Método Doble Ciego , Imaginación/fisiología , Frecuencia Cardíaca/fisiología , Movimiento/fisiología , Respuesta Galvánica de la Piel/fisiología , Adulto , Adolescente , Cinestesia/fisiología , Encuestas y CuestionariosRESUMEN
Accurate assessment of post-stroke deficits is crucial in translational research. Recent advances in machine learning offer precise quantification of rodent motor behavior post-stroke, yet detecting lesion-specific upper extremity deficits remains unclear. Employing proximal middle cerebral artery occlusion (MCAO) and cortical photothrombosis (PT) in mice, we assessed post-stroke impairments via the Staircase test. Lesion locations were identified using 7 T-MRI. Machine learning was applied to reconstruct forepaw kinematic trajectories and feature analysis was achieved with MouseReach, a new data-processing toolbox. Lesion reconstructions pinpointed ischemic centers in the striatum (MCAO) and sensorimotor cortex (PT). Pellet retrieval alterations were observed, but were unrelated to overall stroke volume. Instead, forepaw slips and relative reaching success correlated with increasing cortical lesion size in both models. Striatal lesion size after MCAO was associated with prolonged reach durations that occurred with delayed symptom onset. Further analysis on the impact of selective serotonin reuptake inhibitors in the PT model revealed no clear treatment effects but replicated strong effect sizes of slips for post-stroke deficit detection. In summary, refined movement analysis unveiled specific deficits in two widely-used mouse stroke models, emphasizing the value of deep behavioral profiling in preclinical stroke research to enhance model validity for clinical translation.
Asunto(s)
Modelos Animales de Enfermedad , Infarto de la Arteria Cerebral Media , Accidente Cerebrovascular , Animales , Ratones , Masculino , Infarto de la Arteria Cerebral Media/diagnóstico por imagen , Infarto de la Arteria Cerebral Media/fisiopatología , Infarto de la Arteria Cerebral Media/complicaciones , Accidente Cerebrovascular/fisiopatología , Accidente Cerebrovascular/diagnóstico por imagen , Accidente Cerebrovascular/complicaciones , Ratones Endogámicos C57BL , Imagen por Resonancia Magnética/métodos , Aprendizaje Automático , Movimiento/fisiologíaRESUMEN
Studies reported the existence of instability catch (IC) during trunk flexion in patients with chronic low back pain (CLBP). However, different movement speeds can cause different neuromuscular demands resulting in altered kinematic patterns. In addition, kinematic characterization corresponding to clinical observation of IC is still limited. Therefore, this study aimed to determine (1) the association between movement speed and kinematic parameters representing IC during trunk flexion and (2) the differences in kinematic parameters between individuals with and without CLBP. Fifteen no low back pain (NoLBP) and 15 CLBP individuals were recruited. Inertial measurement units (IMU) were attached to T3, L1, and S2 spinous processes. Participants performed active trunk flexion while IMU data were simultaneously collected. Total trunk, lumbar, and pelvic mean angular velocity (T_MV, L_MV, and P_MV), as well as number of zero-crossings, peak-to-peak, and area of sudden deceleration and acceleration (Num, P2P, and Area), were derived. Pearson's correlation tests were used to determine the association between T_MV and L_MV, P_MV, Num, P2P, and Area. An ANCOVA was performed to determine the difference in kinematic parameters between groups using movement speed as a covariate. Significant associations (P < 0.05) were found between movement speed and other kinematic parameters, except for Area. Results showed that L_MV significantly differed from the P_MV (P = 0.002) in the CLBP group, while a significant between-group difference (P = 0.037) was found in the P_MV. Additionally, significant between-group differences (P < 0.05) in P2P and Area were observed. The associations between movement speed and kinematic parameters suggest that movement speed changes can alter kinematic patterns. Therefore, clinicians may challenge lumbopelvic neuromuscular control by modifying movement speed to elicit greater change in kinematic patterns. In addition, the NoLBP group used shared lumbar and pelvic contributions, while the CLBP group used less pelvic contribution. Finally, P2P and Area appeared to offer the greatest sensitivity to differentiate between the groups. Overall, these findings may enhance the understanding of the mechanism underlying IC in CLBP.
Asunto(s)
Dolor de la Región Lumbar , Movimiento , Humanos , Dolor de la Región Lumbar/fisiopatología , Fenómenos Biomecánicos , Masculino , Femenino , Adulto , Movimiento/fisiología , Adulto Joven , Dolor Crónico/fisiopatología , Rango del Movimiento Articular/fisiologíaRESUMEN
Assessment of the upper limb is critical to guiding the rehabilitation cycle. Drawbacks of observation-based assessment include subjectivity and coarse resolution of ordinal scales. Kinematic assessment gives rise to objective quantitative metrics, but uptake is encumbered by costly and impractical setups. Our objective was to investigate feasibility and accuracy of computer vision (CV) for acquiring kinematic metrics of the drinking task, which are recommended in stroke rehabilitation research. We implemented CV for upper limb kinematic assessment using modest cameras and an open-source machine learning solution. To explore feasibility, 10 neurotypical participants were recruited for repeated kinematic measures during the drinking task. To investigate accuracy, a simultaneous marker-based motion capture system was used, and error was quantified for the following kinematic metrics: Number of Movement Units (NMU), Trunk Displacement (TD), and Movement Time (MT). Across all participant trials, kinematic metrics of the drinking task were successfully acquired using CV. Compared to marker-based motion capture, no significant difference was observed for group mean values of kinematic metrics. Mean error for NMU, TD, and MT were - 0.12 units, 3.4 mm, and 0.15 s, respectively. Bland-Altman analysis revealed no bias. Kinematic metrics of the drinking task can be measured using CV, and preliminary findings support accuracy. Further study in neurodivergent populations is needed to determine validity of CV for kinematic assessment of the post-stroke upper limb.
Asunto(s)
Extremidad Superior , Humanos , Fenómenos Biomecánicos , Proyectos Piloto , Masculino , Femenino , Adulto , Extremidad Superior/fisiología , Movimiento/fisiología , Rehabilitación de Accidente Cerebrovascular/métodos , Adulto Joven , Aprendizaje Automático , Persona de Mediana EdadRESUMEN
Real-world actions often comprise a series of movements that cannot be entirely planned before initiation. When these actions are executed rapidly, the planning of multiple future movements needs to occur simultaneously with the ongoing action. How the brain solves this task remains unknown. Here, we address this question with a new sequential arm reaching paradigm that manipulates how many future reaches are available for planning while controlling execution of the ongoing reach. We show that participants plan at least two future reaches simultaneously with an ongoing reach. Further, the planning processes of the two future reaches are not independent of one another. Evidence that the planning processes interact is twofold. First, correcting for a visual perturbation of the ongoing reach target is slower when more future reaches are planned. Second, the curvature of the current reach is modified based on the next reach only when their planning processes temporally overlap. These interactions between future planning processes may enable smooth production of sequential actions by linking individual segments of a long sequence at the level of motor planning.
Asunto(s)
Brazo , Movimiento , Desempeño Psicomotor , Humanos , Brazo/fisiología , Movimiento/fisiología , Desempeño Psicomotor/fisiología , Masculino , Femenino , Adulto , Adulto JovenRESUMEN
During vertical jump evaluations in which jump height is estimated from flight time (FT), the jumper must maintain the same body posture between vertical takeoff and landing. As maintaining identical posture is rare during takeoff and landing between different jump attempts and in different individuals, we simulated the effect of changes in ankle position from takeoff to landing in vertical jumping to determine the range of errors that might occur in real-life scenarios. Our simulations account for changes in center of mass position during takeoff and landing, changes in ankle position, different subject statures (1.44-1.98 m), and poor to above-average jump heights. Our results show that using FT to estimate jump height without controlling for ankle position (allowing dorsiflexion) during the landing phase of the vertical jump can overestimate jump height by 18% in individuals of average stature and performing an average 30 cm jump or may overestimate by ≤60% for tall individuals performing a poor 10 cm jump, which is common for individuals jumping with added load. Nevertheless, as assessing jump heights based on FT is common practice, we offer a correction equation that can be used to reduce error, improving jump height measurement validity using the FT method allowing between-subject fair comparisons.
Asunto(s)
Postura , Humanos , Fenómenos Biomecánicos/fisiología , Postura/fisiología , Masculino , Tobillo/fisiología , Adulto , Articulación del Tobillo/fisiología , Femenino , Simulación por Computador , Adulto Joven , Movimiento/fisiologíaRESUMEN
Intercepting moving targets is a fundamental skill in human behavior, influencing various domains such as sports, gaming, and other activities. In these contexts, precise visual processing and motor control are crucial for adapting and navigating effectively. Nevertheless, there are still some gaps in our understanding of how these elements interact while intercepting a moving target. This study explored the dynamic interplay among eye movements, pupil size, and interceptive hand movements, with visual and motion uncertainty factors. We developed a simple visuomotor task in which participants used a joystick to interact with a computer-controlled dot that moved along two-dimensional trajectories. This virtual system provided the flexibility to manipulate the target's speed and directional uncertainty during chase trials. We then conducted a geometric analysis based on optimal angles for each behavior, enabling us to distinguish between simple tracking and predictive trajectories that anticipate future positions of the moving target. Our results revealed the adoption of a strong interception strategy as participants approached the target. Notably, the onset and amount of optimal interception strategy depended on task parameters, such as the target's speed and frequency of directional changes. Furthermore, eye-tracking data showed that participants continually adjusted their gaze speed and position, continuously adapting to the target's movements. Finally, in successful trials, pupillary responses predicted the amount of optimal interception strategy while exhibiting an inverse relationship in trials without collisions. These findings reveal key interactions among visuomotor parameters that are crucial for solving complex interception tasks.
Asunto(s)
Movimientos Oculares , Desempeño Psicomotor , Humanos , Masculino , Femenino , Desempeño Psicomotor/fisiología , Adulto , Movimientos Oculares/fisiología , Adulto Joven , Pupila/fisiología , Percepción de Movimiento/fisiología , Tecnología de Seguimiento Ocular , Mano/fisiología , Movimiento/fisiologíaRESUMEN
BACKGROUND: Previous studies have reported that the sense of "self" is associated with specific brain regions and neural network activities. In addition, the mirror system, which functions when executing or observing an action, might contribute to differentiating the self from others and form the basis of the sense of self as a fundamental physical representation. This study investigated whether differences in mu suppression, an indicator of mirror system activity, reflect cognitions related to self-other discrimination. METHODS: The participants were 30 of healthy college students. The participants observed short video clips of hand movements performed by themselves or actors from two perspectives (i.e., first-person and third-person). The electroencephalogram (EEG) mu rhythm (8-13 Hz) was measured during video observation as an index of mirror neuron system activity. EEG activity related to self-detection was analyzed using participants' hand movements as self-relevant stimuli. RESULTS: The results showed that mu suppression in the 8-13-Hz range exhibited perspective-dependent responses to self/other stimuli. There was a significant self-oriented mu suppression response in the first-person perspective. However, the study found no significant response orientation in the third-person perspective. The results suggest that mirror system activity may involve self-other discrimination differently depending on the perspective. CONCLUSIONS: In summary, this study examined the mirror system's activity for self and others using the EEG's mu suppression. As a result, it was suggested that differences in self and others or perspectives may influence mu suppression.
Asunto(s)
Electroencefalografía , Mano , Movimiento , Humanos , Femenino , Masculino , Mano/fisiología , Adulto Joven , Movimiento/fisiología , Adulto , Neuronas Espejo/fisiología , Ondas Encefálicas/fisiologíaRESUMEN
An abundance of degrees of freedom (DOF) exist when executing a countermovement jump (CMJ). This research aims to simplify the understanding of this complex system by comparing jump performance and independent functional DOF (fDOF) present in CMJs without (CMJNoArms) and with (CMJArms) an arm swing. Principal component analysis was used on 39 muscle forces and 15 3-dimensional joint contact forces obtained from kinematic and kinetic data, analyzed in FreeBody (a segment-based musculoskeletal model). Jump performance was greater in CMJArms with the increased ground contact time resulting in higher external (p = 0.012), hip (p < 0.001) and ankle (p = 0.009) vertical impulses, and slower hip extension enhancing the proximal-to-distal joint extension strategy. This allowed the hip muscles to generate higher forces and greater time-normalized hip vertical impulse (p = 0.006). Three fDOF were found for the muscle forces and 3-dimensional joint contact forces during CMJNoArms, while four fDOF were present for CMJArms. This suggests that the underlying anatomy provides mechanical constraints during a CMJ, reducing the demand on the control system. The additional fDOF present in CMJArms suggests that the arms are not mechanically coupled with the lower extremity, resulting in additional variation within individual motor strategies.
Asunto(s)
Brazo , Músculo Esquelético , Humanos , Fenómenos Biomecánicos , Brazo/fisiología , Masculino , Músculo Esquelético/fisiología , Adulto , Adulto Joven , Articulación de la Cadera/fisiología , Articulación del Tobillo/fisiología , Movimiento/fisiología , Rango del Movimiento Articular/fisiología , FemeninoRESUMEN
Drop jump (DJ) and squat jump (SJ) exercises are commonly used in rhythmic gymnastics training. However, the acute effects of DJ and SJ on countermovement jump (CMJ) performance have not been investigated. This study aimed to verify the post-activation performance enhancement (PAPE) responses induced by DJ and SJ with optimal power load and evaluate the relationship between peak PAPE effects and strength levels. Twenty female rhythmic gymnasts completed the following exercises in a randomized order on three separate days: 6 repetitions of DJs; 6 repetitions of SJs with optimal power load; and no exercise (control condition). Jump height was assessed before (baseline) and at 30 seconds and 3, 6, and 9 minutes after each exercise. DJs significantly improved jump height by 0.8 cm (effect size (ES) = 0.25; P = 0.003) at 30 seconds post-exercise compared with baseline. Jump height significantly decreased by -0.14 cm (ES = -0.61; P = 0.021) at 9 minutes after the control condition. SJs significantly improved jump height by 1.02 cm (ES = 0.36; P = 0.005) at 9 minutes post-exercise compared to the control condition. Jump height and relative back squat one-repetition maximum were positively related after performing DJs (r = 0.63; P = 0.003) and SJs (r = 0.64; P = 0.002). DJ and SJ exercises effectively improved countermovement jump height. DJ improved jump height early, while SJ produced greater potentiation effects later. Athletes with a higher strength level benefited the most from these exercises.
Asunto(s)
Rendimiento Atlético , Gimnasia , Fuerza Muscular , Ejercicio Pliométrico , Humanos , Gimnasia/fisiología , Femenino , Rendimiento Atlético/fisiología , Ejercicio Pliométrico/métodos , Fuerza Muscular/fisiología , Adolescente , Adulto Joven , Movimiento/fisiologíaRESUMEN
Contemporary research has begun to show a strong relationship between movements and the perception of time. More specifically, concurrent movements serve to both bias and enhance time estimates. To explain these effects, we recently proposed a mechanism by which movements provide a secondary channel for estimating duration that is combined optimally with sensory estimates. However, a critical test of this framework is that by introducing "noise" into movements, sensory estimates of time should similarly become noisier. To accomplish this, we had human participants move a robotic arm while estimating intervals of time in either auditory or visual modalities (n = 24, ea.). Crucially, we introduced an artificial "tremor" in the arm while subjects were moving, that varied across three levels of amplitude (1-3 N) or frequency (4-12 Hz). The results of both experiments revealed that increasing the frequency of the tremor led to noisier estimates of duration. Further, the effect of noise varied with the base precision of the interval, such that a naturally less precise timing (i.e., visual) was more influenced by the tremor than a naturally more precise modality (i.e., auditory). To explain these findings, we fit the data with a recently developed drift-diffusion model of perceptual decision-making, in which the momentary, within-trial variance was allowed to vary across conditions. Here, we found that the model could recapitulate the observed findings, further supporting the theory that movements influence perception directly. Overall, our findings support the proposed framework, and demonstrate the utility of inducing motor noise via artificial tremors.
Asunto(s)
Percepción Auditiva , Percepción del Tiempo , Temblor , Humanos , Masculino , Femenino , Temblor/fisiopatología , Adulto , Adulto Joven , Percepción del Tiempo/fisiología , Percepción Auditiva/fisiología , Percepción Visual/fisiología , Movimiento/fisiologíaRESUMEN
Standing long jump is known as one of the important skills in the success of athletes in most sports. In addition, one of the most effective factors that can affect standing long jump distance and kinematics is the focus of attention used by the athlete. Therefore, the aim of the present study was to compare the effect of internal, external, and holistic focus of attention instructions on standing long jump performance and kinematics. The participants were 30 novices (all males; mean age = 21.70 ± 2.21 years; mean height = 175.73 ± 6.09 cm; and mean weight = 73.76 ± 11.77 kg) who performed 12 standing long jumps in four focus of attention conditions. Internal focus, external focus, holistic focus, and control conditions were implemented in a counterbalanced order. Jump distance and maximum knee flexion angle before take-off were recorded in all trials. The results showed that in relation to the standing long jump performance, the distance was similar in external and holistic focus conditions, and both were superior to internal or control conditions. There was no difference between control and internal focus of attention conditions. The results related to movement kinematics, however, did not report a difference between the maximum flexion angles before take-off. This study replicates the benefits of external and holistic focus instructions for jump distance, but this difference was not a product of different maximum knee flexion angles. It is suggested that coaches implement external and/or holistic focus cues to maximize athlete performance in jumping tasks.
Asunto(s)
Rendimiento Atlético , Atención , Humanos , Masculino , Fenómenos Biomecánicos/fisiología , Adulto Joven , Atención/fisiología , Rendimiento Atlético/fisiología , Movimiento/fisiología , Adulto , AtletasRESUMEN
Surface electromyography (sEMG) offers a novel method in human-machine interactions (HMIs) since it is a distinct physiological electrical signal that conceals human movement intention and muscle information. Unfortunately, the nonlinear and non-smooth features of sEMG signals often make joint angle estimation difficult. This paper proposes a joint angle prediction model for the continuous estimation of wrist motion angle changes based on sEMG signals. The proposed model combines a temporal convolutional network (TCN) with a long short-term memory (LSTM) network, where the TCN can sense local information and mine the deeper information of the sEMG signals, while LSTM, with its excellent temporal memory capability, can make up for the lack of the ability of the TCN to capture the long-term dependence of the sEMG signals, resulting in a better prediction. We validated the proposed method in the publicly available Ninapro DB1 dataset by selecting the first eight subjects and picking three types of wrist-dependent movements: wrist flexion (WF), wrist ulnar deviation (WUD), and wrist extension and closed hand (WECH). Finally, the proposed TCN-LSTM model was compared with the TCN and LSTM models. The proposed TCN-LSTM outperformed the TCN and LSTM models in terms of the root mean square error (RMSE) and average coefficient of determination (R2). The TCN-LSTM model achieved an average RMSE of 0.064, representing a 41% reduction compared to the TCN model and a 52% reduction compared to the LSTM model. The TCN-LSTM also achieved an average R2 of 0.93, indicating an 11% improvement over the TCN model and an 18% improvement over the LSTM model.
Asunto(s)
Electromiografía , Redes Neurales de la Computación , Articulación de la Muñeca , Humanos , Electromiografía/métodos , Articulación de la Muñeca/fisiología , Rango del Movimiento Articular/fisiología , Movimiento/fisiología , Procesamiento de Señales Asistido por Computador , Algoritmos , Adulto , Masculino , Muñeca/fisiologíaRESUMEN
Musculoskeletal Disorders (MSDs) stand as a prominent cause of injuries in modern agriculture. Scientific research has highlighted a causal link between MSDs and awkward working postures. Several methods for the evaluation of working postures, and related risks, have been developed such as the Rapid Upper Limb Assessment (RULA). Nevertheless, these methods are generally applied with manual measurements on pictures or videos. As a consequence, their applicability could be scarce, and their effectiveness could be limited. The use of wearable sensors to collect kinetic data could facilitate the use of these methods for risk assessment. Nevertheless, the existing system may not be usable in the agricultural and vine sectors because of its cost, robustness and versatility to the various anthropometric characteristics of workers. The aim of this study was to develop a technology capable of collecting accurate data about uncomfortable postures and repetitive movements typical of vine workers. Specific objectives of the project were the development of a low-cost, robust, and wearable device, which could measure data about wrist angles and workers' hand positions during possible viticultural operations. Furthermore, the project was meant to test its use to evaluate incongruous postures and repetitive movements of workers' hand positions during pruning operations in vineyard. The developed sensor had 3-axis accelerometers and a gyroscope, and it could monitor the positions of the hand-wrist-forearm musculoskeletal system when moving. When such a sensor was applied to the study of a real case, such as the pruning of a vines, it permitted the evaluation of a simulated sequence of pruning and the quantification of the levels of risk induced by this type of agricultural activity.
Asunto(s)
Postura , Dispositivos Electrónicos Vestibles , Humanos , Postura/fisiología , Enfermedades Musculoesqueléticas/fisiopatología , Agricultura/métodos , Agricultura/instrumentación , Muñeca/fisiología , Fenómenos Biomecánicos/fisiología , Adulto , Masculino , Técnicas Biosensibles/instrumentación , Técnicas Biosensibles/métodos , Movimiento/fisiologíaRESUMEN
While interest in using wearable sensors to measure infant leg movement is increasing, attention should be paid to the characteristics of the sensors. Specifically, offset error in the measurement of gravitational acceleration (g) is common among commercially available sensors. In this brief report, we demonstrate how we measured the offset and other errors in three different off-the-shelf wearable sensors available to professionals and how they affected a threshold-based movement detection algorithm for the quantification of infant leg movement. We describe how to calibrate and correct for these offsets and how conducting this improves the reproducibility of results across sensors.
Asunto(s)
Algoritmos , Pierna , Movimiento , Dispositivos Electrónicos Vestibles , Humanos , Movimiento/fisiología , Lactante , Pierna/fisiología , Calibración , Reproducibilidad de los Resultados , Monitoreo Fisiológico/instrumentación , Monitoreo Fisiológico/métodos , AceleraciónRESUMEN
The objective of this study was to assess the concurrent validity of the Kunwei force plate system in relation to variables during a counter-movement jump (CMJ) task, in comparison to the Kistler in-ground force plate system, which is considered the "gold standard". METHODS: In a single testing session, the Kunwei force plates were placed directly on top of the in-ground Kistler force plate. This allowed for the simultaneous collection of vertical ground reaction forces from 30 participants (male, age = 22.8 ± 2.8 years, body mass = 74.3 ± 12.3 kg, height 178.2 ± 4.6 cm) during CMJ tests. The consistency between force plate systems was assessed using ordinary least products regression (OLPR) with bootstrapped 95% confidence intervals and the Interclass Correlation Coefficient (ICC). RESULTS: There was no fixed or proportional bias in the CMJ variables measured between the force plate systems. The variables exhibited a strong correlation across the force plates during the CMJ task (ICC > 0.950, p < 0.01). CONCLUSION: The findings of this study indicate that there was no statistical difference between the Kunwei and Kistler force plate systems when evaluating common CMJ strategy and outcome variables, which are considered the gold standard. Hence, the Kunwei force plate can be regarded as a reliable substitute for the established industry benchmark in evaluating the force-time characteristics of the CMJ. Researchers, athletes, and coaches have the option to utilize this affordable and portable choice as a substitute for the more expensive laboratory-based force plate system. This alternative allows for the precise measurement of CMJ performance and force-time variables.
Asunto(s)
Movimiento , Humanos , Masculino , Movimiento/fisiología , Adulto Joven , Adulto , Fenómenos Biomecánicos/fisiología , Prueba de Esfuerzo/métodos , Rendimiento Atlético/fisiologíaRESUMEN
A brain-computer interface could control a bionic hand by interpreting electroencephalographic (EEG) signals associated with wrist extension (WE) and wrist flexion (WF) movements. Misinterpretations of the EEG may stem from variations in the force, speed and range of these movements. To address this, we designed, constructed and tested a novel dynamometer, the IsoReg, which regulates WE and WF movements during EEG recording experiments. The IsoReg restricts hand movements to isometric WE and WF, controlling their speed and range of motion. It measures movement force using a dual-load cell system that calculates the percentage of maximum voluntary contraction and displays it to help users control movement force. Linearity and measurement accuracy were tested, and the IsoReg's performance was evaluated under typical EEG experimental conditions with 14 participants. The IsoReg demonstrated consistent linearity between applied and measured forces across the required force range, with a mean accuracy of 97% across all participants. The visual force gauge provided normalised force measurements with a mean accuracy exceeding 98.66% across all participants. All participants successfully controlled the motor tasks at the correct relative forces (with a mean accuracy of 89.90%) using the IsoReg, eliminating the impact of inherent force differences between typical WE and WF movements on the EEG analysis. The IsoReg offers a low-cost method for measuring and regulating movements in future neuromuscular studies, potentially leading to improved neural signal interpretation.
Asunto(s)
Electroencefalografía , Muñeca , Humanos , Electroencefalografía/métodos , Muñeca/fisiología , Masculino , Adulto , Femenino , Movimiento/fisiología , Interfaces Cerebro-Computador , Adulto Joven , Dinamómetro de Fuerza Muscular , Rango del Movimiento Articular/fisiologíaRESUMEN
Sensorimotor disturbances such as disturbed cervical joint position sense (JPS) and reduced reaction time and velocity in fast cervical movements have been demonstrated in people with neck pain. While these sensorimotor functions have been assessed mainly in movement science laboratories, new sensor technology enables objective assessments in the clinic. The aim was to investigate concurrent validity of a VR-based JPS test and a new cervical reaction acuity (CRA) test. Twenty participants, thirteen asymptomatic and seven with neck pain, participated in this cross-sectional study. The JPS test, including outcome measures of absolute error (AE), constant error (CE), and variable error (VE), and the CRA test, including outcome measures of reaction time and maximum velocity, were performed using a VR headset and compared to a gold standard optical motion capture system. The mean bias (assessed with the Bland-Altman method) between VR and the gold standard system ranged from 0.0° to 2.4° for the JPS test variables. For the CRA test, reaction times demonstrated a mean bias of -19.9 milliseconds (ms), and maximum velocity a mean bias of -6.5 degrees per seconds (°/s). The intraclass correlation coefficients (ICCs) between VR and gold standard were good to excellent (ICC 0.835-0.998) for the JPS test, and excellent (ICC 0.931-0.954) for reaction time and maximum velocity for the CRA test. The results show acceptable concurrent validity for the VR technology for assessment of JPS and CRA. A slightly larger bias was observed in JPS left rotation which should be considered in future research.
Asunto(s)
Dolor de Cuello , Tiempo de Reacción , Humanos , Femenino , Adulto , Masculino , Estudios Transversales , Dolor de Cuello/fisiopatología , Dolor de Cuello/diagnóstico , Tiempo de Reacción/fisiología , Vértebras Cervicales/fisiología , Adulto Joven , Realidad Virtual , Rango del Movimiento Articular/fisiología , Propiocepción/fisiología , Movimiento/fisiología , Cuello/fisiología , Persona de Mediana EdadRESUMEN
Inertial measurement units (IMU) are increasingly utilized to capture biomechanical measures such as joint kinematics outside traditional biomechanics laboratories. These wearable sensors have been proven to help clinicians and engineers monitor rehabilitation progress, improve prosthesis development, and record human performance in a variety of settings. The Valor IMU aims to offer a portable motion capture alternative to provide reliable and accurate joint kinematics when compared to industry gold standard optical motion capture cameras. However, IMUs can have disturbances in their measurements caused by magnetic fields, drift, and inappropriate calibration routines. Therefore, the purpose of this investigation is to validate the joint angles captured by the Valor IMU in comparison to an optical motion capture system across a variety of movements. Our findings showed mean absolute differences between Valor IMU and Vicon motion capture across all subjects' joint angles. The tasks ranged from 1.81 degrees to 17.46 degrees, the root mean squared errors ranged from 1.89 degrees to 16.62 degrees, and interclass correlation coefficient agreements ranged from 0.57 to 0.99. The results in the current paper further promote the usage of the IMU system outside traditional biomechanical laboratories. Future examinations of this IMU should include smaller, modular IMUs with non-slip Velcro bands and further validation regarding transverse plane joint kinematics such as joint internal/external rotations.