RESUMEN

Weight-bearing skin cells show promising therapeutic potential.

Asunto(s)

RESUMEN

The loss of a hand disrupts the sophisticated neural pathways between the brain and the hand, severely affecting the level of independence of the patient and the ability to carry out daily work and social activities. Recent years have witnessed a rapid evolution of surgical techniques and technologies aimed at restoring dexterous motor functions akin to those of the human hand through bionic solutions, mainly relying on probing of electrical signals from the residual nerves and muscles. Here, we report the clinical implementation of an interface aimed at achieving this goal by exploiting muscle deformation, sensed through passive magnetic implants: the myokinetic interface. One participant with a transradial amputation received an implantation of six permanent magnets in three muscles of the residual limb. A truly self-contained myokinetic prosthetic arm embedding all hardware components and the battery within the prosthetic socket was developed. By retrieving muscle deformation caused by voluntary contraction through magnet localization, we were able to control in real time a dexterous robotic hand following both a direct control strategy and a pattern recognition approach. In just 6 weeks, the participant successfully completed a series of functional tests, achieving scores similar to those achieved when using myoelectric controllers, a standard-of-care solution, with comparable physical and mental workloads. This experience raised conceptual and technical limits of the interface, which nevertheless pave the way for further investigations in a partially unexplored field. This study also demonstrates a viable possibility for intuitively interfacing humans with robotic technologies.

Asunto(s)

RESUMEN

Hand Movement Recognition (HMR) with sEMG is crucial for artificial hand prostheses. HMR performance mostly depends on the feature information that is fed to the classifiers. However, sEMG often captures noise like power line interference (PLI) and motion artifacts. This may extract redundant and insignificant feature information, which can degrade HMR performance and increase computational complexity. This study aims to address these issues by proposing a novel procedure for automatically removing PLI and motion artifacts from experimental sEMG signals. This will make it possible to extract better features from the signal and improve the categorization of various hand movements. Empirical mode decomposition and energy entropy thresholding are utilized to select relevant mode components for artifact removal. Time domain features are then used to train classifiers (kNN, LDA, SVM) for hand movement categorization, achieving average accuracies of 92.36%, 93.63%, and 98.12%, respectively, across subjects. Additionally, muscle contraction efforts are classified into low, medium, and high categories using this technique. Validation is performed on data from ten subjects performing eight hand movement classes and three muscle contraction efforts with three surface electrode channels. Results indicate that the proposed preprocessing improves average accuracy by 9.55% with the SVM classifier, significantly reducing computational time.

Asunto(s)

RESUMEN

Current control approaches for gross prosthetic arm movement mainly regulate movement over a continuous range of target poses. However, these methods suffer from output fluctuation caused by input signal variations during gross arm movements. Prosthesis control approaches with a finite number of discrete target poses can address this issue and reduce the complexity of the pose control process. However, it remains under-explored in the literature and suffers from the consequences of misclassifying the target poses. Here, we propose a novel Uncertainty-Aware Discrete-Target Prosthesis Control (UA-DPC) approach. This approach consists of (1) an uncertainty-aware classification scheme to reduce unintended pose switches caused by misclassifications, and (2) real-time trajectory planning that adjusts motion to be rapid or conservative based on low or high quantified uncertainty, respectively. By addressing the impact of misclassification, this approach facilitates more efficient and smooth movements. Human-in-the-loop experiments were conducted in a virtual reality environment with 12 non-disabled participants. The participants controlled a transhumeral prosthesis using three approaches: the proposed UA-DPC, a discrete-target approach based on a traditional off-the-shelf classifier, and a continuous-target approach. The results demonstrate the superior performance of UA-DPC, which provides more efficient task completion with fewer misclassification instances as well as smoother residual limb and prosthesis movement.

Asunto(s)

RESUMEN

This comprehensive systematic review critically analyzes the current progress and challenges in automating transtibial prosthesis alignment. The manual identification of alignment changes in prostheses has been found to lack reliability, necessitating the development of automated processes. Through a rigorous systematic search across major electronic databases, this review includes the highly relevant studies out of an initial pool of 2111 records. The findings highlight the urgent need for automated alignment systems in individuals with transtibial amputation. The selected studies represent cutting-edge research, employing diverse approaches such as advanced machine learning algorithms and innovative alignment tools, to automate the detection and adjustment of prosthesis alignment. Collectively, this review emphasizes the immense potential of automated transtibial prosthesis alignment systems to enhance alignment accuracy and significantly reduce human error. Furthermore, it identifies important limitations in the reviewed studies, serving as a catalyst for future research to address these gaps and explore alternative machine learning algorithms. The insights derived from this systematic review provide valuable guidance for researchers, clinicians, and developers aiming to propel the field of automated transtibial prosthesis alignment forward.

Asunto(s)

RESUMEN

BACKGROUND: Commercially available osseointegrated devices for transfemoral amputees are limited in size and thus fail to meet the significant anatomical variability in the femoral medullary canal. This study aimed to develop a customized osseointegrated stem to better accommodate a variety of femoral anatomies in transfemoral amputees than off-the-shelf stems. Customization is expected to enhance cortical bone preservation and increase the stem-bone contact area, which are critical for the long-term stability and success of implants. METHODS: A customized stem (OsteoCustom) was designed based on the statistical shape variability of the medullary canal. The implantability of the OsteoCustom stem was tested via 70 computed tomography (CT) images of human femurs and compared to that of a commercial device (OFI-C) for two different resection levels. The evaluations included the volume of cortical bone removed and the percentage of stem-bone contact area for both resection levels. Statistical significance was analyzed using paired and unpaired t tests. RESULTS: The OsteoCustom stem could be virtually implanted in all 70 femurs, while the OFI-C was unsuitable in 19 cases due to insufficient cortical thickness after implantation, further emphasizing its adaptability to varying anatomical conditions. The OsteoCustom stem preserved a greater volume of cortical bone than did the OFI-C. In fact, 42% less bone was removed at the proximal resection level (3.15 cm³ vs. 5.42 cm³, p ≤ 0.0001), and 33% less at the distal resection level (2.25 cm³ vs. 3.39 cm³, p = 0.003). The stem-bone contact area was also greater for the OsteoCustom stem, particularly at the distal resection level, showing a 20% increase in contact area (52.3% vs. 32.2%, p = 0.002) compared to that of the OFI-C. CONCLUSIONS: The OsteoCustom stem performed better than the commercial stem by preserving more cortical bone and achieving a greater stem-bone contact area, especially at distal resection levels where the shape of the medullary canal exhibits more inter-subject variability. Optimal fit in the distal region is of paramount importance for ensuring the stability of osseointegrated implants. This study highlights the potential benefits of customized osseointegrated stems in accommodating a broader range of femoral anatomies, with enhanced fit in the medullary canal.

Asunto(s)

RESUMEN

BACKGROUND: Eye tracking technology not only reveals the acquisition of visual information at fixation but also has the potential to unveil underlying cognitive processes involved in learning to use a multifunction prosthetic hand. It also reveals gaze behaviours observed during standardized tasks and self-chosen tasks. The aim of the study was to explore the use of eye tracking to track learning progress of multifunction hands at two different time points in prosthetic rehabilitation. METHODS: Three amputees received control training of a multifunction hand with new control strategy. Detailed description of control training was collected first. They wore Tobii Pro2 eye-tracking glasses and performed a set of standardized tasks (required to switch to different grips for each task) after one day of training and at one-year-follow-up (missing data for Subject 3 at the follow up due to socket problem). They also performed a self-chosen task (free to use any grip for any object) and were instructed to perform the task in a way how they would normally do at home. The gaze-overlaid videos were analysed using the Tobii Pro Lab and the following metrics were extracted: fixation duration, saccade amplitude, eye-hand latency, fixation count and time to first fixation. RESULTS: During control training, the subjects learned 3 to 4 grips. Some grips were easier, and others were more difficult because they forgot or were confused with the switching strategies. At the one-year-follow-up, a decrease in performance time, fixation duration, eye-hand latency, and fixation count was observed in Subject 1 and 2, indicating an improvement in the ability to control the multifunction hand and a reduction of cognitive load. An increase in saccade amplitude was observed in both subjects, suggesting a decrease in difficulty to control the prosthetic hand. During the standardized tasks, the first fixation of all three subjects were on the multifunction hand in all objects. During the self-chosen tasks, the first fixations were mostly on the objects first. CONCLUSION: The qualitative data from control training and the quantitative eye tracking data from clinical standardized tasks provided a rich exploration of cognitive processing in learning to control a multifunction hand. Many prosthesis users prefer multifunction hands and with this study we have demonstrated that a targeted prosthetic training protocol with reliable assessment methods will help to lay the foundation for measuring functional benefits of multifunction hands.

Asunto(s)

RESUMEN

Motion analysis has played a crucial role in providing gait analysis for prosthetic users. Understanding kinematics in motion analysis allows for the evaluation of the effects of prostheses and the development of a prosthetic component design that aids in walking within the community. However, there are currently limited open datasets available to study the locomotion of individuals using transtibial prostheses, and most research studies involve a limited number of participants. This dataset shows 30 transtibial prosthesis users walking comfortably on a 10-meter walkway inside a laboratory. We offer a set of joint ankles obtained from the inertial measurement unit (IMU) signals in CSV file format. We also provide the optical motion capture (OMC) system's raw trajectory marker data in C3D file format and joint angle in CSV file format. This open dataset will provide resources for professionals interested in amputee gait for research in amputee gait detection and tracking algorithms. Moreover, the data will be the control data for comparison in developing advanced prosthetic components.

Asunto(s)

RESUMEN

OBJECTIVE: To explore cognitive load in people with transfemoral amputations fitted with socket or bone-anchored prostheses by describing activity in the left and right dorsolateral prefrontal cortices during single- and dual-task walking. DESIGN: Cross-sectional pilot study. PATIENTS: 8 socket prosthesis users and 8 bone-anchored prosthesis users. All were fitted with microprocessor-controlled prosthetic knees. METHODS: Participants answered self-report questionnaires and performed gait tests during 1 single-task walking condition and 2 dual-task walking conditions. While walking, activity in the dorsolateral prefrontal cortex was measured using functional near-infrared spectroscopy. Cognitive load was investigated for each participant by exploring the relative concentration of oxygenated haemoglobin in the left and right dorsolateral prefrontal cortex. Symmetry of brain activity was investigated by calculating a laterality index. RESULTS: Self-report measures and basic gait variables did not show differences between the groups. No obvious between-group differences were observed in the relative concentration of oxygenated haemoglobin for any walking condition. There was a tendency towards more right-side brain activity for participants using a socket prosthesis during dual-task conditions. CONCLUSIONS: This pilot study did not identify substantial differences in cognitive load or lateralization between socket prosthesis users and bone-anchored prosthesis users.

Asunto(s)

RESUMEN

BACKGROUND: In the last decade, notable progress in mechatronics paved the way for a new generation of arm prostheses, expanding motor capabilities thanks to their multiple active joints. Yet, the design of control schemes for these advanced devices still poses a challenge, especially with the limited availability of command signals for higher levels of arm impairment. When addressing this challenge, current commercial devices lack versatility and customizing options to be employed as test-beds for developing novel control schemes. As a consequence, researchers resort to using lab-specific experimental apparatuses on which to deploy their innovations, such as virtual reality setups or mock prosthetic devices worn by unimpaired participants. METHODS: To meet this need for a test-bed, we developed the Smart Arm platform, a human-like, multi-articulated robotic arm that can be worn as a trans-humeral arm prosthesis. The design process followed three principles: provide a reprogrammable embedded system allowing in-depth customization of control schemes, favor easy-to-buy parts rather than custom-made components, and guarantee compatibility with industrial standards in prosthetics. RESULTS: The Smart ArM platform includes motorized elbow and wrist joints while being compatible with commercial prosthetic hands. Its software and electronic architecture can be easily adapted to build devices with a wide variety of sensors and actuators. This platform was employed in several experiments studying arm prosthesis control and sensory feedback. We also report our participation in Cybathlon, where our pilot with forearm agenesia successfully drives the Smart Arm prosthesis to perform activities of daily living requiring both strength and dexterity. CONCLUSION: These application scenarios illustrate the versatility and adaptability of the proposed platform, for research purposes as well as outside the lab. The Smart Arm platform offers a test-bed for experimenting with prosthetic control laws and command signals, suitable for running tests in lifelike settings where impaired participants wear it as a prosthetic device. In this way, we aim at bridging a critical gap in the field of upper limb prosthetics: the need for realistic, ecological test conditions to assess the actual benefit of a technological innovation for the end-users.

Asunto(s)

RESUMEN

Individuals with transtibial amputation can activate residual limb muscles to volitionally control robotic ankle prostheses for walking and postural control. Most continuous myoelectric ankle prostheses have used a tethered, pneumatic device. The Open Source Leg allows for myoelectric control on an untethered electromechanically actuated ankle. To evaluate continuous proportional myoelectric control on the Open Source Ankle, we recruited five individuals with transtibial amputation. Participants walked over ground with an experimental powered prosthesis and their prescribed passive prosthesis before and after multiple powered device practice sessions. Participants averaged five hours of total walking time. After the final testing session, participants indicated their prosthesis preference via questionnaire. Participants tended to increase peak ankle power after practice (powered 0.80 ± 1.02 W/kg and passive 0.39 ± 0.31 W/kg). Additionally, participants tended to generate greater ankle work with the powered prosthesis compared to their passive device ( 0.13 ± .15 J/kg increase). Although work and peak power generation were not statistically different between the two prostheses, participants preferred walking with the prosthesis under myoelectric control compared to the passive prosthesis. These results indicate individuals with transtibial amputation learned to walk with an untethered powered prosthesis under continuous myoelectric control. Four out 5 participants generated larger magnitudes in peak power compared to their passive prosthesis after practice sessions. An additional important finding was participants chose to walk with peak ankle powers about half of what the powered prosthesis was capable of based on mechanical testing.

Asunto(s)

RESUMEN

Surgical techniques in amputation medicine did not change for a long time, while prosthesis technology underwent rapid development. The focus shifted to optimising the residual limb for prostheses use. At the same time, digital technologies such as gamification, virtual and mixed reality revolutionised rehabilitation. The use of gamification elements increases motivation and adherence to therapy, while immersive technologies enable realistic and interactive therapy experiences. This is particularly useful in the context of controlling modern prostheses and treating phantom pain. In addition, digital applications contribute to optimised documentation of symptoms and therapy successes. Overall, these technologies open up new, effective and personalised therapeutic approaches that can significantly improve the quality of life of amputation patients.

Asunto(s)

RESUMEN

Upper limb amputation severely affects the quality of life of individuals. Therefore, developing closed-loop upper-limb prostheses would enhance the sensory-motor capabilities of the prosthetic user. Considering design priorities based on user needs, the restoration of sensory feedback is one of the most desired features. This study focuses on employing Transcutaneous Electrical Nerve Stimulation (TENS) as a non-invasive somatotopic stimulation technique for restoring somatic sensations in upper-limb amputees. The aim of this study is to propose two encoding strategies to elicit force and slippage sensations in transradial amputees. The former aims at restoring three different levels of force through a Linear Pulse Amplitude Modulation (LPAM); the latter is devoted to elicit slippage sensations through Apparent Moving Sensation (AMS) by means of three different algorithms, i.e. the Pulse Amplitude Variation (PAV), the Pulse Width Variation (PWV) and Inter-Stimulus Delay Modulation (ISDM). Amputees had to characterize perceived sensations and to perform force and slippage recognition tasks. Results demonstrates that amputees were able to correctly identify low, medium and high levels of force, with an accuracy above the 80% and similarly, to also discriminate the slippage moving direction with a high accuracy above 90%, also highlighting that ISDM would be the most suitable method, among the three AMS strategies to deliver slippage sensations. It was demonstrated for the first time that the developed encoding strategies are effective methods to somatotopically reintroduce in the amputees, by means of TENS, force and slippage sensations.

Asunto(s)

RESUMEN

INTRODUCTION: Approximately 89% of all service members with amputations do not return to duty. Restoring intuitive neural control with somatosensory sensation is a key to improving the safety and efficacy of prosthetic locomotion. However, natural somatosensory feedback from lower-limb prostheses has not yet been incorporated into any commercial prostheses. MATERIALS AND METHODS: We developed a neuroprosthesis with intuitive bidirectional control and somatosensation and evoking phase-dependent locomotor reflexes, we aspire to significantly improve the prosthetic rehabilitation and long-term functional outcomes of U.S. amputees. We implanted the skin and bone integrated pylon with peripheral neural interface pylon into the cat distal tibia, electromyographic electrodes into the residual gastrocnemius muscle, and nerve cuff electrodes on the distal tibial and sciatic nerves. Results. The bidirectional neural interface that was developed was integrated into the existing passive Free-Flow Foot and Ankle prosthesis, WillowWood, Mount Sterling, OH. The Free-Flow Foot was chosen because it had the highest Index of Anthropomorphicity among lower-limb prostheses and was the first anthropomorphic prosthesis brought to market. Conclusion. The cats walked on a treadmill with no cutaneous feedback from the foot in the control condition and with their residual distal tibial nerve stimulated during the stance phase of walking.

Asunto(s)

RESUMEN

We present a case report of synostosis after transtibial amputation because of distraction regenerate formation after decortication of the lateral surfaces of the tibia and fibula, sequential compression, and distraction using the Ilizarov apparatus. Its advantage is that there is no need to shorten bone. The establishment of distal tibia-fibula synostosis (Ertl) in patients with transtibial amputation has been advocated to improve function and prosthetic wear. There are a variety of techniques to create a bone block. This case reports the successful use of an innovative technique to establish bone block. A patient with transtibial amputation underwent revision of residual limb by decorticating the lateral aspect of the distal tibia and the medial aspect of the distal fibula and acutely compressing the distal ends of the 2 bones with the Ilizarov apparatus. The distal fibula is then slowly and progressively distracted laterally, and the bone is formed in the space between the distal fibula and tibia, creating synostosis with an increased distal bone cross-sectional surface area for improved function and prosthetic wear. The follow-up period was 24 months. Within 3 months, synostosis was formed, which increased the area of the supporting surface and allowed temporary and then permanent prosthetics. After 24 months, synostosis did not differ from the structure of tibial stump bones.

Asunto(s)

Asunto(s)

RESUMEN

BACKGROUND: Patient access to body-powered and myoelectric upper limb prostheses in the United States is often restricted by a healthcare system that prioritizes prosthesis prescription based on cost and perceived value. Although this system operates on an underlying assumption that design differences between these prostheses leads to relative advantages and disadvantages of each device, there is limited empirical evidence to support this view. MAIN TEXT: This commentary article will review a series of studies conducted by our research team with the goal of differentiating how prosthesis design might impact user performance on a variety of interrelated domains. Our central hypothesis is that the design and actuation method of body-powered and myoelectric prostheses might affect users' ability to access sensory feedback and account for device properties when planning movements. Accordingly, other domains that depend on these abilities may also be affected. While our work demonstrated some differences in availability of sensory feedback based on prosthesis design, this did not result in consistent differences in prosthesis embodiment, movement accuracy, movement quality, and overall kinematic patterns. CONCLUSION: Collectively, our findings suggest that performance may not necessarily depend on prosthesis design, allowing users to be successful with either device type depending on the circumstances. Prescription practices should rely more on individual needs and preferences than cost or prosthesis design. However, we acknowledge that there remains a dearth of evidence to inform decision-making and that an expanded research focus in this area will be beneficial.

Asunto(s)

RESUMEN

Pattern recognition (PR)-based myoelectric control systems can naturally provide multifunctional and intuitive control of upper limb prostheses and restore lost limb function, but understanding their robustness remains an open scientific question. This study investigates how limb positions and electrode shifts-two factors that have been suggested to cause classification deterioration-affect classifiers' performance by quantifying changes in the class distribution using each factor as a class and computing the repeatability and modified separability indices. Ten intact-limb participants took part in the study. Linear discriminant analysis (LDA) was used as the classifier. The results confirmed previous studies that limb positions and electrode shifts deteriorate classification performance (14-21% decrease) with no difference between factors (p > 0.05). When considering limb positions and electrode shifts as classes, we could classify them with an accuracy of 96.13 ± 1.44% and 65.40 ± 8.23% for single and all motions, respectively. Testing on five amputees corroborated the above findings. We have demonstrated that each factor introduces changes in the feature space that are statistically new class instances. Thus, the feature space contains two statistically classifiable clusters when the same motion is collected in two different limb positions or electrode shifts. Our results are a step forward in understanding PR schemes' challenges for myoelectric control of prostheses and further validation needs be conducted on more amputee-related datasets.

Asunto(s)

RESUMEN

Phantom limb pain, a common challenge for amputees, lacks effective treatment options. Vibration therapy is a promising non-pharmacologic intervention for reducing pain intensity, but its efficacy in alleviating phantom limb pain requires further investigation. This study focused on developing prosthesis liners with integrated vibration motors to administer vibration therapy for phantom limb pain. The prototypes developed for this study addressed previous issues with wiring the electronic components. Two transfemoral amputees participated in a four-week at-home trial, during which they used the vibration liner and rated their initial and final pain intensity on a numeric rating scale each time they had phantom pain. Semi-structured interviews were conducted to gather feedback following the at-home trial. Both participants described relaxing and soothing sensations in their residual limb and phantom limb while using vibration therapy. One participant reported a relaxation of his phantom limb sensations, while both participants noted a decrease in the intensity of their phantom limb pain. Participants said the vibration liners were comfortable but suggested that the vibration could be stronger and that aligning the contacts could be easier. The results of this study highlight the potential effectiveness of using vibration therapy to reduce the intensity of phantom limb pain and suggest a vibration liner may be a feasible mode of administering the therapy. Future research should address optimizing the performance of the vibration liners to maximize their therapeutic benefits.

Asunto(s)

RESUMEN

The ability of a novel biorealistic hand prosthesis for grasp force control reveals improved neural compatibility between the human-prosthetic interaction. The primary purpose here was to validate a virtual training platform for amputee subjects and evaluate the respective roles of visual and tactile information in fundamental force control tasks. We developed a digital twin of tendon-driven prosthetic hand in the MuJoCo environment. Biorealistic controllers emulated a pair of antagonistic muscles controlling the index finger of the virtual hand by surface electromyographic (sEMG) signals from amputees' residual forearm muscles. Grasp force information was transmitted to amputees through evoked tactile sensation (ETS) feedback. Six forearm amputees participated in force tracking and holding tasks under different feedback conditions or using their intact hands. Test results showed that visual feedback played a predominant role than ETS feedback in force tracking and holding tasks. However, in the absence of visual feedback during the force holding task, ETS feedback significantly enhanced motor performance compared to feedforward control alone. Thus, ETS feedback still supplied reliable sensory information to facilitate amputee's ability of stable grasp force control. The effects of tactile and visual feedback on force control were subject-specific when both types of feedback were provided simultaneously. Amputees were able to integrate visual and tactile information to the biorealistic controllers and achieve a good sensorimotor performance in grasp force regulation. The virtual platform may provide a training paradigm for amputees to adapt the biorealistic hand controller and ETS feedback optimally.

Asunto(s)