RESUMEN

Purpose: This study aimed to develop a minimally invasive surgical procedure for laminar lift and posterior cervical laminoplasty via the intermuscular approach using a canine model. Methods: Six Alaskan dogs were used for developing the surgical approach. The bilateral laminae of C3-7 were cut with an ultrasonic osteotome and fixed with bilateral plates to maintain the lamina lifting and reshape a wider spinal canal. The important structures, such as ligaments, supraspinous ligaments, interspinous ligaments, and ligamentum flavum were preserved. The therapeutic effect was evaluated by preoperative and postoperative imaging results and neck mobility. Results: The surgical procedures were all successfully performed in the 6 animals. All the dogs survived well within 1 year of postoperative follow-up. The postoperative neck mobility was as good as the preoperative one. Computed tomography results showed that the anteroposterior diameter of the spinal canal was successfully enlarged and maintained well. Conclusions: The minimally invasive surgical procedure for laminar lift and posterior cervical laminoplasty via the intermuscular approach was feasible in a canine model, which might be applied in clinical practice.

Asunto(s)

RESUMEN

Descreveu-se a anatomia da região cervical de equinos adultos, com base em imagens obtidas no exame de tomografia computadorizada helicoidal realizado em peças anatômicas de equinos adultos. A tomografia computadorizada foi o método de imagem diagnóstica de escolha e possibilita as reconstruções de imagens tridimensionais e em outros planos anatômicos, como sagital e coronal. Todas as imagens foram adquiridas e avaliadas em filtro e janela para tecido ósseo. Observaram-se diferenças anatômicas e as particularidades normais das vértebras, principalmente da região occipitoatlantoaxial, a qual apresenta maior incidência de alterações.

The anatomy of the cervical spine of mature horses based on images obtained with a helical computed tomography examination performed on anatomic specimens was studied. Computed tomography was the diagnostic imaging method of choice and allowed three-dimensional reconstructions of images and other anatomical planes, such as coronal and sagittal. All images were acquired and evaluated in the filter and window to bone tissue. It was possible to demonstrate the anatomical differences and peculiarities of the normal vertebrae, particularly the occipito-atlantoaxial region, which has a higher incidence of changes to assist in the visualization of any change of the bone pattern on CT studies.

Asunto(s)

RESUMEN

OBJECTIVE: To evaluate the use of a locking compression plate (LCP) with monocortical screw purchase for stabilization of the canine cervical spine. STUDY DESIGN: Experimental study. ANIMALS: Cadaveric canine cervical spine specimens (n = 7). METHODS: Flexion and extension bending moments were applied to canine cadaveric specimens (C3-C6) in 4-point bending, before and after creation of a ventral slot at C4-C5, and after fixation with a 5 hole, 3.5 mm LCP with monocortical screw placement. Screw placement and penetration into the vertebral canal were determined by radiography. Range of motion, stiffness, and energy for passive physiologic loads were determined for the C3-C4, C4-C5, and C5-C6 vertebral motion units (VMU). Monotonic failure properties were determined for cervical extension. Effects of treatments on biomechanical variables were assessed using repeated measures analysis of variance and least square means (P ≤ .05). RESULTS: The ventral slot procedure increased range of motion at the treated VMU. Plate fixation decreased range of motion, increased stiffness, and decreased energy at the treated VMU. No changes were observed at adjacent VMUs. None of the screws penetrated the vertebral canal. Mean (± SD) yield bending moment of plate stabilized, slotted spines was 15.6 ± 4.6 N m. CONCLUSION: LCP fixation with monocortical screws stabilized the canine cervical spine.

Asunto(s)

RESUMEN

REASONS FOR PERFORMING THE STUDY: Spinal mobilisation and spinal manipulative therapy (SMT) are being applied to horses; however, there are limited objective measures of their effects on spinal mobility or stiffness in actively ridden horses. OBJECTIVES: To quantify passive spinal movements induced during dorsoventral mobilisation of the trunk and to identify any potential effects of SMT on measures of spinal mobility within the thoracolumbar region in standing horses. We hypothesise that displacement amplitudes will be significantly increased across vertebral levels after SMT, compared to spinal mobilisation only within the control group. METHODS: Passive spinal mobility was assessed in 24 actively ridden mature horses once a week for 3 weeks. Peak vertical displacement, loading and unloading velocities, applied force, stiffness and the frequency of truncal oscillations induced during dorsoventral spinal mobilisation were measured at 5 thoracolumbar sites and compared between treatment (n = 12) and control (n = 12) groups. Each week, outcome parameters were measured pre- and post intervention, 10 min apart. Treatment consisted of manually-applied, high-velocity, low-amplitude (HVLA) thrusts directed at the 5 intervertebral sites. Control horses received no additional intervention. A mixed-effects linear regression model was used to assess the interactive effects of treatment group, vertebral level, week and pre-/post intervention. RESULTS: Post intervention displacement amplitudes of the trunk and applied forces were significantly higher in the SMT group, compared to the control group. A similar trend was found for increased spinal stiffness within the SMT group. Across vertebral levels, SMT induced a 40% increase in displacement, a 20% increase in applied force and a 7% increase in stiffness. CONCLUSIONS AND POTENTIAL RELEVANCE: SMT increased dorsoventral displacement of the trunk, which is indicative of producing increased passive spinal flexibility in actively ridden horses. Further clinical research is needed on the effectiveness of manual therapies in horses with objective measures of back pain, stiffness and poor performance.

Asunto(s)

RESUMEN

OBJECTIVES: To (1) define mechanical properties in flexion, extension, and left lateral bending of cadaveric equine 4th and 5th cervical (C4-C5) articulations, (2) compare biomechanical properties of C4-C5 when stabilized with a kerf cut cylinder (KCC) compared with a ventrally placed 4.5 mm locking compression plate (LCP). STUDY DESIGN: In vitro biomechanical investigation. SAMPLE POPULATION: Cadaveric adult equine cervical vertebral columns (n=54). METHODS: Cervical vertebrae aged by horse dentition and size measured from radiographs were divided into 3 age groups then randomly allocated to 3 groups. The C4-C5 articulation was treated differently in each of the groups: KCC group; KCC-implanted LCP group; 8-hole 4.5 mm LCP implanted and intact group; no implant. Specimens were randomly subdivided into 1 of 3 loading conditions, before testing to failure under 4-point bending. Stiffness, yield bending moment, failure bending moment, and failure mode were recorded. General linear models were performed to analyze associations between biomechanical properties and test variables. RESULTS: All specimens failed at the C4-C5 intervertebral articulation. The cervical vertebrae with the LCP construct had significantly higher stiffness, yield bending moment, and failure bending moment than the KCC-implanted cervical vertebrae. Failure modes differed between groups and varied with loading direction: KCC group, fractures of C5 associated with the KCC were common; LCP group, screw pull out or fractures (of C4 and C5 bodies, during extension and the caudal aspect of C4 during left lateral bending) were common; and intact group, subluxations were most common. CONCLUSIONS: In this model, LCP constructs had superior biomechanical properties compared with KCC constructs. Further research investigating the effect of repetitive loading is indicated.

Asunto(s)

RESUMEN

In order to objectively quantify the effect of manipulation on back-related locomotion anomalies in the horse, a recently developed kinematic measuring technique for the objective quantification of thoracolumbar motion in the horse was applied in a dressage horse that was suffering from a back problem. In this horse, clinically, a right-convex bending (scoliosis) from the 10th thoracic vertebra to the second lumbar vertebra was diagnosed. As a result, there was a marked asymmetric movement of the thoracolumbar spine. Functionally, there was severe loss of performance. Thoracolumbar motion was measured in terms of ventrodorsal flexion, lateral flexion, and axial rotation using an automated gait analysis system. Measurements were repeated before and 2 days after treatment, before the second treatment 3 weeks later, and at 4 weeks and 8 months after the second treatment to assess long-term effect. At the same time, performance of the horse was assessed subjectively by the trainer as well. Symmetry of movement improved dramatically after the first treatment. After this, there was a slight decrease in symmetry, but 8 months after the last treatment the symmetry indexes for the various joints were still considerably better than during the first (pre-treatment) measuring session. Subjectively, the trainer did not notice improvement until after measurement session 4. Between sessions 4 and 5 (at 4 weeks and 8 months after the second treatment) there was a change of trainer. The new trainer did not report any back problem, and succeeded in bringing the horse back to its former level in competition. It is concluded that manipulation had a measurable influence on the kinematics of the thoracolumbar spine. However, it is recognized that an improvement in symmetry of motion is not equivalent to clinical improvement and that other measures, such as changes in management, may be more decisive.

Asunto(s)

RESUMEN

A thorough knowledge of equine spinal anatomy, biomechanics, and potential pathology is required to understand the principles and theories behind chiropractic and to apply its techniques properly. Chiropractic provides additional diagnostic and therapeutic means that may help equine practitioners to identify and treat the primary cause of lameness or poor performance. Specialized training in the evaluation and treatment of vertebral joint dysfunction and neuromusculoskeletal disorders places chiropractic in the forefront of conservative treatment of spinal-related disorders. Nevertheless, limited research is currently available on equine chiropractic and other nontraditional modalities in veterinary medicine. In 1996, the American Veterinary Medicine Association's Committee on Alternative and Complementary Therapies suggested that the research community should be encouraged to prioritize avenues of research and to allocate research funds to projects that are designed to provide further scientific evaluation of these modalities. The future of equine chiropractic in veterinary medicine is dependent on future research into the clinical effects of chiropractic techniques and the basic pathophysiology of spinal-related disorders in horses.

Asunto(s)