RESUMEN
Purpose: Dental reconstruction for patients diagnosed with severe mandibular bone atrophy using common dental implants is a challenging process. In such cases, surgeons may encounter challenges such as insufficient available bone, soft tissue, damage to the inferior alveolar nerve, and even the risk of bone fracture. In this study, a new design concept of mandibular patient-specific implants for severely atrophic ridges followed by finite element evaluation was presented to investigate the mechanical functionality of the concept. Method: The implant is comprised of two modular parts including an inferior border cover and a horseshoe-shaped structure. This horseshoe segment fits into the cover and is then screwed to it using two screws on each side. A 1 mm deflection was applied to a reference point located between the two anterior posts to extract the resulting Von Mises stress distribution in each part and the reaction force on the reference point which corresponds to the chewing force that the patient must apply to deform the horseshoe. This 1 mm gap is a design consideration and critical distance that horseshoe contacts the gingiva and disturbs the alveolar nerve. Results: The results revealed that load was transmitted from the horseshoe to the cover, and there were no stress contours on the body of the mandible. However, stress concentration was observed in screw locations in the mandible, the amount of which was decreased by increasing the number of used screws. In horseshoe, stress concentration values were around 350 MPa, and the measured reaction force on the reference point was just under 200 N. Conclusion: The finite element analysis results showed that this concept would be functional as the minimum load would be transmitted to the mandibular ridge, and since the patients diagnosed with atrophic ridge are not able to apply load to an amount near 200 N, the horseshoe would not contact the gingiva. Also, it is concluded that increasing the number of bone screw fixations would decrease the risk of long-term screw loosening.
Asunto(s)
Implantes Dentales , Análisis de Elementos Finitos , Mandíbula , Humanos , Mandíbula/cirugía , Estrés Mecánico , AtrofiaRESUMEN
This study is a preliminary investigation exploring the mechanical properties of three-dimensional (3D)-printed personalized mesh titanium alloy prostheses and the feasibility of repairing hemi-mandibular defects. The ANSYS 14.0 software and selective laser melting (SLM) were used to produce personalized mesh titanium alloy scaffolds. Scaffolds printed using different parameters underwent fatigue property tests and scanning electron microscopy (SEM) of the fracture points. Models of hemi-mandibular defects (encompassing the temporomandibular joint) were created using beagle dogs. Freeze-dried allogeneic mandibles or 3D-printed personalized mesh titanium alloy prostheses were used for repair. Gross observation, computed tomography (CT), SEM, and histological examinations were used to compare the two repair methods. The prostheses with filament diameters of 0.5 and 0.7 mm could withstand 14,000 times and >600,000 cycles of alternating stresses, respectively. The truss-structure scaffold with a large aperture and large aperture ratio could withstand roughly 250,000 cycles of alternating forces. The allogeneic mandible graft required intraoperative shaping, while the 3D-printed mesh titanium alloy prostheses were personalized and did not require intraoperative shaping. The articular disc on the non-operated sides experienced degenerative changes. No liver and kidney toxicity was observed in the two groups of animals. The 3D-printed mesh titanium alloy prostheses could effectively restore the shape of the mandibular defect region and reconstruct the temporomandibular joint.
Asunto(s)
Aleaciones , Impresión Tridimensional , Titanio , Animales , Perros , Titanio/química , Aleaciones/química , Mandíbula/cirugía , Ensayo de Materiales , Mallas Quirúrgicas , Prótesis e ImplantesRESUMEN
An advantage of treated implant surfaces is their increased degree of hydrophilicity and wettability compared with untreated, machined, smooth surfaces that are hydrophobic. The present preclinical in vivo study aimed to compare the two implant surface types, namely SLActive (Straumann, Basel, Switzerland) and nanohydroxyapatite (Hiossen, Englewood Cliffs, NJ, USA), in achieving early osseointegration. The authors hypothesised that the nanohydroxyapatite surface is comparable to SLActive for early bone-implant contact. Six male mixed foxhounds underwent mandibular premolar and first molar extraction, and the sockets healed for 42 days. The mandibles were randomised to receive implants with either SLActive (control group) or nanohydroxyapatite surfaces (test group). A total of 36 implants were placed in 6 animals, and they were sacrificed at 2 weeks (2 animals), 4 weeks (2 animals) and 6 weeks (2 animals) after implant surgery. When radiographic analysis was performed, the difference in bone level between the two groups was statistically significant at 4 weeks (P = 0.024) and 6 weeks (P = 0.008), indicating that the crestal bone level was better maintained for the test group versus the control group. The bone-implant contact was also higher for the test group at 2 (P = 0.012) and 4 weeks (P = 0.011), indicating early osseointegration. In conclusion, this study underscored the potential of implants with nanohydroxyapatite surfaces to achieve early osseointegration.
Asunto(s)
Implantes Dentales , Durapatita , Mandíbula , Oseointegración , Propiedades de Superficie , Animales , Oseointegración/efectos de los fármacos , Masculino , Durapatita/farmacología , Durapatita/química , Perros , Mandíbula/cirugía , Alveolo Dental/cirugía , Alveolo Dental/diagnóstico por imagen , Diseño de Prótesis Dental , Distribución Aleatoria , Extracción Dental , Implantación Dental Endoósea/métodos , Diente Molar/cirugía , Titanio , HumectabilidadRESUMEN
AIM: This is a report of the 5-year results of a two-group parallel randomized clinical trial comparing longitudinal implant stability, and clinical and radiographic peri-implant outcomes of mandibular overdentures retained by one (1-IOD group) or two (2-IOD group) implants. METHODS: All participants received 4.1 mm diameter tissue-level implants (Straumann® Standard Plus - SLActive®, Institut Straumann AG), installed in the mandible midline (1-IOD; n = 23) or the lateral incisor-canine area bilaterally (2-IOD; n = 24), and loaded after 3 weeks. Implant Stability Quotient (ISQ) was measured using a resonance frequency device (Osstell® Mentor, Integration Diagnostics) at implant placement, after three weeks (loading), and at the 6-month, 1-, 3-, and 5-year follow-ups. Marginal bone loss and clinical implant outcomes (plaque, calculus, suppuration and bleeding) were assessed periodically up to 5 years after loading. RESULTS: Only minor changes in marginal bone level were observed after 5 years (mean = 0.37; SD = 0.44 mm), and satisfactory and stable peri-implant parameters were observed throughout the 5-year follow-up. No significant differences between groups were found. Overall, the mean primary implant stability was considered high (> 70) for the two groups (1-IOD = 78.1 ± 4.5; 2-IOD = 78.0 ± 5.8). No noticeable changes were observed between implant insertion and loading. A marked increase was observed from insertion to the 6-month follow-up - the mean difference for the 1-IOD group was + 5.5 ± 5.5 (Effect size = 1.00), while for the 2-IOD group, the mean difference was + 6.0 ± 5.6 (Effect size = 1.08). No relevant changes were observed throughout the follow-up periods up to 5 years. Linear mixed-effect model regression showed no influence of the bone-related variables (p > 0.05) and the number of implants (p = 0.087), and a significant effect of the time variable (p < 0.001). CONCLUSION: Satisfactory peri-implant outcomes and stable secondary stability suggest good clinical performance and successful long-term osseointegration of the implants for single and two-implant mandibular overdentures. Using a single implant to retain a mandibular overdenture does not seem to result in detrimental implant loading over the five years of overdenture use. CLINICAL RELEVANCE: This study corroborates the use of a single implant to retain a mandibular denture.
Asunto(s)
Prótesis Dental de Soporte Implantado , Retención de Dentadura , Prótesis de Recubrimiento , Mandíbula , Humanos , Masculino , Femenino , Mandíbula/cirugía , Anciano , Persona de Mediana Edad , Resultado del Tratamiento , Implantación Dental Endoósea/métodos , Dentadura Completa Inferior , Pérdida de Hueso Alveolar/diagnóstico por imagen , Análisis de Frecuencia de ResonanciaRESUMEN
OBJECTIVES: To evaluate changes of the upper airway and oral cavity volumes in patients with skeletal Class III malocclusion undergoing bimaxillary orthognathic surgery, and to analyze the correlation between postoperative upper airway decrease and the amount of jaw movement and oral cavity volume reduction. MATERIALS AND METHODS: Thirty patients (16 males and 14 females) undergoing bimaxillary surgery were included. Three-dimensional reconstruction of the upper airway and oral cavity were performed using preoperative (T0) and postoperative (T1) (6 months) cone-beam computed tomography scans. RESULTS: The volume, sagittal area and minimum cross-sectional area of the upper airway were diminished (P < .001). The decrease in volume and minimum cross-sectional area in the oropharyngeal region of the upper airway were weakly correlated with B-point posterior movement (P < .05). Total oral cavity volume was decreased, with maxillary oral volume increasing and mandibular oral volume decreasing (P < .001). Upper airway decrease was highly correlated with total oral volume reduction and mandibular oral volume reduction, with the most significant correlation being with total oral volume reduction (P < .001). CONCLUSIONS: Class III bimaxillary surgery reduced the volume, sagittal area, and minimum cross-sectional area of the upper airway as well as oral cavity volume. Upper airway changes were weakly correlated with anterior-posterior mandibular movement but significantly correlated with oral cavity volume changes. Thus, oral cavity volume reduction is a crucial factor of upper airway decrease in patients with skeletal Class III malocclusion undergoing bimaxillary orthognathic surgery.
Asunto(s)
Tomografía Computarizada de Haz Cónico , Imagenología Tridimensional , Maloclusión de Angle Clase III , Boca , Procedimientos Quirúrgicos Ortognáticos , Humanos , Tomografía Computarizada de Haz Cónico/métodos , Maloclusión de Angle Clase III/cirugía , Maloclusión de Angle Clase III/diagnóstico por imagen , Femenino , Masculino , Procedimientos Quirúrgicos Ortognáticos/métodos , Adulto , Boca/diagnóstico por imagen , Imagenología Tridimensional/métodos , Adulto Joven , Proyectos Piloto , Maxilar/diagnóstico por imagen , Maxilar/cirugía , Adolescente , Mandíbula/diagnóstico por imagen , Mandíbula/cirugía , Orofaringe/diagnóstico por imagen , Orofaringe/patología , Faringe/diagnóstico por imagenRESUMEN
OBJECTIVES: To determine the difference between orthodontic camouflage and orthodontic-orthognathic surgery using the traditional cephalometric measurement IMPA and the newly proposed IA/PAMD, the angle between the long axis of the lower incisor (IA) and the principal axis of the mandibular alveolus (PAMD). MATERIALS AND METHODS: This study included 40 cases each in the orthodontic camouflage group (OG) and orthodontic-orthognathic surgery group (SG). The differences between the IMPA and IA/PAMD before and after treatment were compared between the two groups. T0 lateral cephalometric images of the 10 cases with the highest and lowest increase in the IA/PAMD were analyzed to identify characteristics associated with a higher risk of overdecompensation of the lower incisors during presurgical orthodontic treatment. RESULTS: Both the OG and SG showed a significant improvement in hard- and soft-tissue measurements. However, in the OG, there was significant lingual inclination of the lower incisor but only a small change in the IA/PAMD. In the surgical group, the IMPA was close to 90° after treatment, but the IA/PAMD significantly increased. CONCLUSIONS: In orthodontic camouflage, the lower anterior teeth were significantly moved lingually with a better root-bone relationship. However, this relationship deteriorated in some surgical patients. Therefore, it is important to conduct cephalometric or cone-beam computed tomography examinations during preoperative orthodontics to identify and prevent possible periodontal risks.
Asunto(s)
Cefalometría , Incisivo , Maloclusión de Angle Clase III , Procedimientos Quirúrgicos Ortognáticos , Humanos , Incisivo/diagnóstico por imagen , Cefalometría/métodos , Maloclusión de Angle Clase III/cirugía , Maloclusión de Angle Clase III/terapia , Maloclusión de Angle Clase III/diagnóstico por imagen , Femenino , Masculino , Procedimientos Quirúrgicos Ortognáticos/métodos , Mandíbula/cirugía , Mandíbula/diagnóstico por imagen , Adolescente , Adulto Joven , Ortodoncia Correctiva/métodos , AdultoRESUMEN
BACKGROUND-OBJECTIVE(S): This randomized, split-mouth study aimed to compare postoperative complications following the surgical extraction of impacted lower third molars using piezosurgery versus conventional rotary instruments. MATERIALS AND METHODS: Twenty-one patients, aged 18-35 years, with bilaterally and symmetrically impacted lower third molars, were randomly assigned to undergo extraction using piezosurgery on one side and conventional rotary instruments on the other. RESULTS: The piezosurgery method required a longer operation time. However, it resulted in quicker resolution of postoperative swelling by the 7th day compared to the conventional method, where swelling persisted longer. Mandibular angle-tragus measurements were significantly higher with the conventional method on the 1st, 3rd, and 7th postoperative days. Although mouth opening decreased significantly after piezosurgery, it returned to preoperative levels by the 7th day, outperforming the conventional method. Postoperative pain was notably higher with the conventional method during the first four days but showed no significant difference from the 5th day onward. Alveolar bone healing was significantly better with piezosurgery at the 3rd and 6th months. Temporary paresthesia occurred in one patient from the conventional group, resolving within four weeks. Neither method resulted in alveolar osteitis. CONCLUSION(S): Within the study's limitations, piezosurgery demonstrated a reduction in postoperative discomfort, suggesting its advantage in enhancing patient recovery following lower third molar extractions. CLINICAL SIGNIFICANCE: Piezosurgery, when used appropriately, can reduce postoperative complications compared to conventional methods. Clinicians should be aware of its indications, benefits, and potential challenges. Trial registration This study was registered as a clinical trial to the ClinicalTrials.gov, and the registration ID is NCT06262841 ( https://clinicaltrials.gov/study/NCT06262841 ).
Asunto(s)
Regeneración Ósea , Tercer Molar , Piezocirugía , Complicaciones Posoperatorias , Extracción Dental , Humanos , Tercer Molar/cirugía , Extracción Dental/métodos , Extracción Dental/efectos adversos , Adulto , Femenino , Masculino , Adolescente , Piezocirugía/métodos , Adulto Joven , Complicaciones Posoperatorias/prevención & control , Diente Impactado/cirugía , Dolor Postoperatorio/etiología , Morbilidad , Mandíbula/cirugíaRESUMEN
BACKGROUND: Alveolar Bone loss occurs frequently during the first six months after tooth extraction. Various studies have proposed different methods to reduce as much as possible the atrophy of the alveolar ridge after tooth extraction. Filling the socket with biomaterials after extraction can reduce the resorption of the alveolar ridge. We compared the height of the alveolar process at the mesial and distal aspects of the extraction site and the resorption rate was calculated after the application of HA/ß-TCP or synthetic co-polymer polyglycolic - polylactic acid PLGA mixed with blood to prevent socket resorption immediately and after tooth extraction. METHODS: The study was conducted on 24 extraction sockets of impacted mandibular third molars bilaterally, vertically, and completely covered, with a thin bony layer. HA/ß-TCP was inserted into 12 of the dental sockets immediately after extraction, and the synthetic polymer PLGA was inserted into 12 of the dental sockets. All sockets were covered completely with a full-thickness envelope flap. Follow-up was performed for one year after extraction, using radiographs and stents for the vertical alveolar ridge measurements. RESULTS: The mean resorption rate in the HA/ß-TCP and PLGA groups was ± 1.23 mm and ± 0.1 mm, respectively. A minimal alveolar bone height reduction of HA/ß-TCP was observed after 9 months, the reduction showed a slight decrease to 0.93 mm, while this rate was 0.04 mm after 9 months in the PLGA group. Moreover, the bone height was maintained after three months, indicating a good HA/ß-TCP graft performance in preserving alveolar bone (1.04 mm) while this rate was (0.04 mm) for PLGA. CONCLUSION: The PLGA graft demonstrated adequate safety and efficacy in dental socket preservation following tooth extraction. However, HA/ß-TCP causes greater resorption at augmented sites than PLGA, which clinicians should consider during treatment planning.
Asunto(s)
Pérdida de Hueso Alveolar , Sustitutos de Huesos , Ácido Láctico , Copolímero de Ácido Poliláctico-Ácido Poliglicólico , Extracción Dental , Alveolo Dental , Humanos , Alveolo Dental/cirugía , Pérdida de Hueso Alveolar/prevención & control , Sustitutos de Huesos/uso terapéutico , Copolímero de Ácido Poliláctico-Ácido Poliglicólico/uso terapéutico , Masculino , Femenino , Ácido Láctico/uso terapéutico , Adulto , Ácido Poliglicólico/uso terapéutico , Proceso Alveolar/patología , Tercer Molar/cirugía , Diente Impactado/cirugía , Estudios de Seguimiento , Adulto Joven , Colgajos Quirúrgicos , Materiales Biocompatibles/uso terapéutico , Aumento de la Cresta Alveolar/métodos , Hidroxiapatitas/uso terapéutico , Mandíbula/cirugía , Fosfatos de Calcio/uso terapéutico , Resultado del TratamientoRESUMEN
BACKGROUND: The purpose of the study was to compare the efficacy of the use of 0.2% chlorhexidine irrigation and the oral antibiotics for the prevention of postoperative complication like pain, trismus, swelling and infection after the surgical extraction of IMTM. MATERIAL AND METHODS: A randomised, double blinded clinical trial was planned with two equal groups. Patients were randomly divided into two groups using computer-generated codes with an allocation ratio of 1:1. Group I (Control): Standard preoperative and postoperative systemic oral antibiotics and Group II (Study): No systemic antibiotics and Chlorhexidine irrigation local delivery. The primary outcomes evaluated were postoperative pain, mouth opening, swelling and infection. The secondary outcome variables were the number of analgesics and antibiotics taken by the patient in the postoperative period, the satisfaction of the patient and adverse events, were followed up regulary for 7 days postoperatively. RESULTS: A total of 84 patients, divided into two equal groups participated in the study. In intergroup comparison of swelling, the difference was non-significant on postoperative day (POD) 1 and 7, except for POD 3, where it showed significantly lower results in the antibiotic group (p = 0.012). However, there was no significant difference in pain found between both groups at any of the postoperative time points, and the study group had a lesser need for rescue analgesics than the control group. A statistically significant difference in incidence of dry socket was observed (p = 0.03) and gastrointestinal adverse symptoms, but it showed insignificant results for wound dehiscence and pus discharge. Also, patient satisfaction was higher in the study group. CONCLUSIONS: both antibiotics and localised delivery demonstrated comparable results in terms of swelling, pain and trismus. However, with lesser adverse events, the localised chlorhexidine delivery with curved tips outperformed the antibiotic group.
Asunto(s)
Antibacterianos , Clorhexidina , Tercer Molar , Complicaciones Posoperatorias , Irrigación Terapéutica , Extracción Dental , Diente Impactado , Humanos , Clorhexidina/administración & dosificación , Masculino , Femenino , Método Doble Ciego , Extracción Dental/efectos adversos , Adulto , Tercer Molar/cirugía , Antibacterianos/administración & dosificación , Diente Impactado/cirugía , Irrigación Terapéutica/métodos , Complicaciones Posoperatorias/prevención & control , Adulto Joven , Administración Oral , Mandíbula/cirugía , Antiinfecciosos Locales/administración & dosificación , Sistemas de Liberación de Medicamentos , AdolescenteAsunto(s)
Anodoncia , Diente Premolar , Diente Molar , Anquilosis del Diente , Diente Primario , Humanos , Anquilosis del Diente/terapia , Anodoncia/terapia , Diente Premolar/anomalías , Femenino , Cierre del Espacio Ortodóncico/métodos , Niño , Masculino , Técnicas de Movimiento Dental/métodos , Técnicas de Movimiento Dental/instrumentación , Mandíbula/cirugíaRESUMEN
Background: Mandibular tumor surgery necessitates precise osteotomies based on tumor boundaries; however, conventional osteotomies often lack accuracy in predicting osteotomy positions and planes, potentially leading to excessive resection of normal bone tissues or residual tumors, thus compromising postoperative quality of life and clinical outcomes. Robotic-assisted surgery (RAS) augmented with artificial intelligence (AI) offers precise localization capabilities, aiding surgeons in achieving accurate osteotomy positioning. This study aimed to evaluate the feasibility and accuracy of a robotic magnetic navigation system for positioning and osteotomy in an intraoral surgical trial of a mandibular tumor model. Methods: Patient computed tomography (CT) imaging data of mandibular chin and body tumors were utilized to create 3D printed models, serving as study subjects for mandibular tumor resection. Ten pairs of models were printed for the experimental and control groups. The experimental group (EG) underwent osteotomy using a robot-assisted surgical navigation system, performing osteotomy under robotic navigation following alignment based on preoperative design. The control group (CG) underwent traditional surgery, estimating osteotomy position empirically according to preoperative design. Postoperative CT scans were conducted on both models, and actual postoperative results were compared to preoperative design. Osteotomy accuracy was evaluated by positional and angular errors between preoperatively designed and actual osteotomy planes. Results: For ten randomly selected spots on the left and right sides, respectively, the EG group had mean distance errors of 0.338 mm and 0.941 mm. These values were obtained from the EG group. In the EG group, on the left side, the mean angular errors were 14.741 degrees, while on the right side, they were 13.021 degrees. For the 10 randomly selected spots on the left and right sides, respectively, the CG had mean distance errors of 1.776 mm and 2.320 mm. This is in contrast to the results obtained by the EG. It was determined that the left side had a mean angle error of 16.841 degrees, while the right side had an error of 18.416 degrees in the CG group. The above results indicated significantly lower point errors of bilateral osteotomy planes in the experimental group compared to the control group. Conclusion: This study demonstrates the feasibility of electromagnetic navigation robot-assisted intraoral osteotomy for mandibular tumors and suggests that this approach can enhance the precision of clinical surgery.
Asunto(s)
Neoplasias Mandibulares , Osteotomía , Procedimientos Quirúrgicos Robotizados , Humanos , Procedimientos Quirúrgicos Robotizados/métodos , Osteotomía/métodos , Osteotomía/instrumentación , Neoplasias Mandibulares/cirugía , Neoplasias Mandibulares/diagnóstico por imagen , Tomografía Computarizada por Rayos X , Fenómenos Electromagnéticos , Cirugía Asistida por Computador/métodos , Inteligencia Artificial , Mandíbula/cirugía , Mandíbula/diagnóstico por imagen , Sistemas de Navegación Quirúrgica , Impresión TridimensionalRESUMEN
PURPOSE: To retrospectively evaluate peri-implant bone loss and health status associated with the long-term use of laser surface-treated implants. METHODS: For control study, total of 23 titanium ASTM F136 grade 23 implants were placed in the edentulous molar area of the mandible. When the Implant Stability Quotient (ISQ) ≥ 70 and insertion torque value (ITV) ≥ 35-50 Ncm at the insertion site, an immediate provisional restoration was connected to the implant within a week after surgery. The definitive restorations were placed 2 months after surgery for all implants. 13 implants were immediately loaded, while 10 implants were conventionally loaded. For comparative study, Radiographs were taken from third years for and then annually for the subsequent eight years to monitor marginal bone loss. RESULTS: After eight year of implant installation, the average change in vertical bone loss was 0.009 mm (P < 0.001), while the average change in horizontal bone loss 8 year after implant placement was 0.026 mm (P < 0.001). The mean marginal bone loss was < 0.2 mm on average. CONCLUSIONS: In this retrospective study, laser-treated implants exhibit a low rate of bone absorption around the implants.
Asunto(s)
Pérdida de Hueso Alveolar , Implantes Dentales , Estudios Retrospectivos , Humanos , Implantes Dentales/efectos adversos , Masculino , Femenino , Pérdida de Hueso Alveolar/etiología , Pérdida de Hueso Alveolar/diagnóstico por imagen , Persona de Mediana Edad , Resultado del Tratamiento , Rayos Láser , Anciano , Propiedades de Superficie , Adulto , Mandíbula/cirugía , Diseño de Prótesis Dental , Carga Inmediata del Implante Dental/métodosRESUMEN
BACKGROUND: There is insufficient evidence recommending a framework material and a CAD/CAM manufacturing technique for mandibular implant-supported prostheses. The study objective was to evaluate the clinical application of different materials and construction techniques used for mandibular All-on-4 prosthesis on circumferential peri-implant bony changes after 5 years. METHODS: Thirty-six male patients with all-on-4 mandibular implant-supported prostheses were recalled and divided into three groups. Group PK (patients with frameworks milled from PEEK blocks), Group PSM (patients with frameworks milled from soft metal blocks), and Group SLM (patients with frameworks constructed with additive manufacturing; selective laser melting). The circumferential bone level on all implant faces was assessed with a CBCT. Two-way repeated measures ANOVA was used to compare vertical bone loss (VBL) and horizontal bone loss (HBL) between different groups, implant positions, and observation times followed by Tukey's multiple comparisons. RESULTS: For all observation times, there was a significant difference in VBL between groups for both anterior and posterior implants (P < .001). For anterior implants, group PSM showed the lowest VBL while group PK showed the highest for anterior and posterior implants. For all groups, HBL significantly increased after 5 years for both anterior and posterior implants (P < .001). For anterior implants, group PSM showed the highest HBL. For posterior implants, group PK and SLM showed the highest. CONCLUSION: Within the study's limitations, mandibular implant-supported fixed frameworks fabricated with either milling from PEEK or soft metal blocks, or additive manufacturing (laser melting technology) exhibited significant vertical and horizontal bone height changes after 5 years. CLINICAL TRIAL REGISTRY NUMBER: (NCT06071689) (11/10/2023).
Asunto(s)
Pérdida de Hueso Alveolar , Diseño Asistido por Computadora , Prótesis Dental de Soporte Implantado , Mandíbula , Humanos , Masculino , Persona de Mediana Edad , Mandíbula/diagnóstico por imagen , Mandíbula/cirugía , Pérdida de Hueso Alveolar/diagnóstico por imagen , Tomografía Computarizada de Haz Cónico/métodos , Diseño de Prótesis Dental , Anciano , Benzofenonas , Adulto , Implantes Dentales , PolímerosRESUMEN
OBJECTIVE: To evaluate the dimensional changes in free gingival grafts (FGG) at implant sites in mandibular reconstruction patients. METHODS: Patients who received FGG 4 months after implant placement in the reconstructed mandible with no keratinized mucosa (KM) present were invited for re-examination after 36.7 ± 16.8 months (3.06 ± 1.4 years). Immediately after graft extraction (T0), graft width (GW), graft length (GL), graft thickness (GT), graft dimension (GD), and vertical bone height were documented. Re-examination (T1) included clinical examinations (GW, GL, GD, peri-implant probing depths, and modified Sulcus Bleeding Index), radiographic examination (marginal bone level), and medical chart review. RESULTS: Twenty patients and 62 implants (47 in fibula flaps and 15 in iliac flaps) were included. A significant decrease in GW (51.8%), GL (19.2%), and GD (60.2%), were found between T0 and T1 (p < .001). The univariate analysis showed that GW change was not significantly associated with reconstruction technique, baseline GL, baseline GT, baseline GD, implant location, or type of prosthesis. Implant survival rate of 100% was observed at follow-up. CONCLUSIONS: Within the limitations of the study, free gingival grafts at implant sites in the reconstructed mandible undergo dimensional change that result in a reduction of approximately 60% of the original graft dimension. Graft width decreased over 50%. CLINICAL RELEVANCE: FGG is the standard of care intervention for increasing the amount of KM around implants. This study was the first to evaluate the dimensional change in FGG at implant sites in mandibular reconstruction patients after a medium-term follow-up. CLINICAL TRIAL REGISTRATION: Clinical trial registration is not applicable as this study comprehends a retrospective analysis.
Asunto(s)
Encía , Reconstrucción Mandibular , Humanos , Estudios Retrospectivos , Masculino , Femenino , Persona de Mediana Edad , Reconstrucción Mandibular/métodos , Encía/trasplante , Implantación Dental Endoósea/métodos , Resultado del Tratamiento , Adulto , Implantes Dentales , Mandíbula/cirugía , Mandíbula/diagnóstico por imagen , Colgajos Quirúrgicos , Anciano , Peroné/trasplanteRESUMEN
OBJECTIVES: Inadequate resection margins of less than 5 mm impair local tumor control. This weak point in oncological safety is exacerbated in bone-infiltrating tumors because rapid bone analysis procedures do not exist. This study aims to assess the bony resection margin status of bone-invasive oral cancer using laser-induced breakdown spectroscopy (LIBS). MATERIALS AND METHODS: LIBS experiments were performed on natively lasered, tumor-infiltrated mandibular cross-sections from 10 patients. In total, 5,336 spectra were recorded at defined distances from the tumor border. Resection margins < 1 mm were defined as very close, from 1-5 mm as close, and > 5 mm as clear. The spectra were histologically validated. Based on the LIBS spectra, the discriminatory power of potassium (K) and soluble calcium (Ca) between bone-infiltrating tumor tissue and very close, close, and clear resection margins was determined. RESULTS: LIBS-derived electrolyte emission values of K and soluble Ca as well as histological parameters for bone neogenesis/fibrosis and lymphocyte/macrophage infiltrates differ significantly between bone-infiltrating tumor tissue spectra and healthy bone spectra from very close, close, and clear resection margins (p < 0.0001). Using LIBS, the transition from very close resection margins to bone-infiltrating tumor tissue can be determined with a sensitivity of 95.0%, and the transition from clear to close resection margins can be determined with a sensitivity of 85.3%. CONCLUSIONS: LIBS can reliably determine the boundary of bone-infiltrating tumors and might provide an orientation for determining a clear resection margin. CLINICAL RELEVANCE: LIBS could facilitate intraoperative decision-making and avoid inadequate resection margins in bone-invasive oral cancer.
Asunto(s)
Márgenes de Escisión , Neoplasias de la Boca , Análisis Espectral , Humanos , Neoplasias de la Boca/cirugía , Neoplasias de la Boca/patología , Análisis Espectral/métodos , Masculino , Femenino , Persona de Mediana Edad , Anciano , Invasividad Neoplásica , Calcio/análisis , Potasio/análisis , Mandíbula/cirugía , Mandíbula/patología , Rayos LáserRESUMEN
OBJECTIVES: To compare effectiveness of Autologous Particulate Dentin (APD) with Demineralized Freeze-Dried Bone Allograft (DFDBA) in ridge preservation, using radiographic and clinical parameters. MATERIALS AND METHODS: Thirty subjects with indication of mandibular posterior teeth extraction were randomly assigned to either test or control group. After atraumatic extraction, ridge preservation was performed using APD or DFDBA mixed with i-PRF in test and control groups respectively. Both groups had sockets sealed with A-PRF membrane. Clinical parameters (plaque, gingival and healing indices) and radiographic parameters (vertical ridge height, horizontal ridge width) were assessed at baseline and 6 months using CBCT. Statistical analysis was performed using an independent t-test to compare clinical and radiographic parameters between the groups. RESULTS: Both groups had significant decreases in ridge dimensions over 6 months (p < 0.001). The test group showed less reduction in ridge dimensions than control group at 6 months (p < 0.001). Mean change in vertical height was not significant (1.37 ± 1.32, 1.7311 ± 0.563), but in horizontal ridge width (1.3120 ± 1.13, 1.8093 ± 1.16) was significantly different between test and control groups respectively. There was no statistical difference in clinical parameters between the groups at 6 months (p > 0.001). CONCLUSIONS: APD grafts resulted in significant improvements in radiographic parameters, specifically in vertical ridge height and horizontal ridge width, compared to DFDBA group. CLINICAL RELEVANCE: Autologous particulate dentin is a promising, versatile substitute for regenerative procedures. While more research on its long-term efficacy and application is needed, current evidence suggests it could significantly improve patient care and outcomes.
Asunto(s)
Trasplante Óseo , Dentina , Liofilización , Extracción Dental , Humanos , Femenino , Masculino , Estudios Prospectivos , Dentina/diagnóstico por imagen , Trasplante Óseo/métodos , Extracción Dental/métodos , Adulto , Resultado del Tratamiento , Mandíbula/cirugía , Mandíbula/diagnóstico por imagen , Aumento de la Cresta Alveolar/métodos , Tomografía Computarizada de Haz Cónico , Persona de Mediana Edad , Alveolo Dental/cirugía , Alveolo Dental/diagnóstico por imagen , Aloinjertos , Trasplante AutólogoRESUMEN
BACKGROUND: Segmental mandibulectomy and reconstruction of resulting defect can be performed via intraoral approach (IOA) or extraoral approach (EOA). Both approaches have advantages, disadvantages, indications, and contraindications to consider during their selection. OBJECTIVE: To compare IOA vs EOA of segmental mandibulectomy and microvascular reconstruction with fibula free flap (FFF). METHODS: We conducted a retrospective cohort study in which 51 patients who underwent segmental mandibulectomy and microvascular reconstruction with FFF from 2020 to 2024 were included, especially 17 patients by IOA and 34 patients by EOA, representing both groups of this study. Clinical characteristics, surgery parameters, and patients' prognosis were evaluated. Patients' satisfaction and Derriford Appearance Scale (DAS59) were assessed during follow-up. RESULTS: Ameloblastoma was the most frequent diagnosis (52.9% managed by IOA vs 70.6% by EOA); FFF was frequently positioned as double barrel (94.1% managed by IOA vs 88.2% by EOA). Compared with EOA group, IOA group had less intraoperative blood loss (mean difference [MD] = -112.2, 95% confidence interval [CI]: -178.9 to -45.5, p = 0.001), higher satisfaction score (MD = 1.3, 95% CI: 0.9 to 1.7, p Ë 0.001), and lower DAS59 score (MD = -0.5, 95% CI: -0.7 to -0.2, p Ë 0.001). CONCLUSION: Both IOA and EOA were found safe and feasible, presenting similar perioperative features and postoperative outcomes. Patients managed with IOA were more satisfied with aesthetic outcomes than patients managed with EOA. In the absence of simultaneous immediate implant during mandibular FFF reconstruction, after stability of FFF on the defect site, patients should always be referred to an implantologist and/or prosthodontist for teeth restoration to improve functional and aesthetic outcomes.
Asunto(s)
Peroné , Colgajos Tisulares Libres , Osteotomía Mandibular , Satisfacción del Paciente , Humanos , Colgajos Tisulares Libres/irrigación sanguínea , Colgajos Tisulares Libres/trasplante , Masculino , Femenino , Estudios Retrospectivos , Osteotomía Mandibular/métodos , Persona de Mediana Edad , Peroné/trasplante , Peroné/irrigación sanguínea , Adulto , Procedimientos de Cirugía Plástica/métodos , Neoplasias Mandibulares/cirugía , Anciano , Ameloblastoma/cirugía , Mandíbula/cirugía , Reconstrucción Mandibular/métodosRESUMEN
BACKGROUND: Odontomas are among the most common odontogenic tumors and are generally considered as hamartomatous odontogenic lesions. These tumors can be histopathologically divided into complex odontomas and compound odontomas based on their composition. Odontomas show a slow growing behavior and typically lack characteristic symptoms. The standard surgical treatment for large odontogenic tumors is a mandibular (continuity) resection followed by primary or secondary plastic reconstruction. CASE REPORT: A 22-year-old male presented to the Department of maxillofacial surgery with an increasing feeling of pressure in the left mandible. An orthopantomogram revealed a large complex odontoma rg 038. Instead of mandible continuity resection an alternative minimally invasive technique/approach (intraoral) with a trapezoidal bone flap for the enucleation of an odontoma of the mandibular angle with subsequent flap reimplantation and osteosynthesis was performed. CONCLUSION: Surgical enucleation of large mandibular odontoma with a continuity resection through an extraoral approach represents the surgical standard treatment of this entity. The present case report describes an alternative minimally invasive technique/approach. This technique may reduce surgical risks of the continuity resection through an extraoral approach (nerve damage, scarring) and can improve the long-term stability of the mandible by bone preservation.
Asunto(s)
Mandíbula , Odontoma , Humanos , Masculino , Odontoma/cirugía , Odontoma/patología , Adulto Joven , Mandíbula/cirugía , Mandíbula/patología , Neoplasias Mandibulares/cirugía , Neoplasias Mandibulares/patología , Adulto , Radiografía Panorámica , Resultado del Tratamiento , Colgajos QuirúrgicosRESUMEN
The purpose of this report is to describe an original technique for bone grafting using an inverted autogenous bone block taken from the same edentulous site that was to be implanted. A 54-year-old female presented for replacement of a missing lower premolar. Clinical and radiographical assessments revealed a deficiency in the width of the alveolar ridge. It was decided to expand the edentate area using an inverted bone block. The graft was harvested from the same edentate site that was to be implanted. The crestal bone width after nine months of healing was increased, and an implant was placed. An autogenous inverted bone block can be used as a bone grafting procedure to augment some bone-deficient sites prior to dental implantations. This novel technique provides an autogenous bone without the complexity of having a second surgical site. This technique can be used in specific situations when there is proper bone anatomy.
Asunto(s)
Aumento de la Cresta Alveolar , Trasplante Óseo , Mandíbula , Humanos , Femenino , Persona de Mediana Edad , Aumento de la Cresta Alveolar/métodos , Trasplante Óseo/métodos , Mandíbula/cirugía , Mandíbula/diagnóstico por imagen , Implantación Dental Endoósea/métodosRESUMEN
THE AIM OF THE STUDY: To develop and implement a comprehensive algorithm for the rehabilitation of patients after partial resection of the mandible using a titanium «growing¼ endoprosthesis. MATERIAL AND METHODS: The study included 16 patients aged 2 to 7 years, with benign (6 cases) and malignant (10 cases) tumors of the mandible. The patients were divided into 2 groups depending on the time of fixation of the endoprosthesis. Group 1 included patients with simultaneous installation of a prosthesis (7 people). Group 2 included patients with delayed installation of an endoprosthesis (9 people). For the reconstruction of the mandible, «growing¼ titanium endoprostheses made of Ti6Al4V alloy of various designs were used. Removable orthodontic devices of mechanical and functional type of action, standard elastic mouthguards were used in the process of dental treatment. RESULTS: A comprehensive algorithm has been developed for the rehabilitation of children after partial resection of the mandible, depending on the time of fixation of the prosthesis and the volume of surgical intervention. CONCLUSION: The developed algorithm of complex rehabilitation using a «growing¼ endoprosthesis and dental support at the pre and postoperative stages allows to reduce the volume of secondary deformation of facial structures and dentition.