RESUMEN

CONTEXT: The smear layer may harbor many bacteria; hence, alternative methods are used to disrupt and remove biofilm. AIM: The aim of the study was to compare the effectiveness of EndoActivator, PATS Vario System, and XP-endo Finisher files on smear layer removal using a scanning electron microscope. SUBJECTS AND METHODS: Sixty single-rooted extracted premolars with Vertucci Type 1 configuration were decoronated and divided into four groups. The groups were instrumented with the rotary ProTaper file system. All specimens were flushed with 1 ml of 3% sodium hypochlorite. Group 1 was irrigated with a conventional needle and syringe. In Group 2, the irrigant was activated with an EndoActivator. In Group 3, the irrigant was activated with PATS Vario system, and in Group 4, XP-endo Finisher files were used after biomechanical preparation to remove debris and smear layer. All specimens were finally rinsed with 3 ml of 3% sodium hypochlorite. The teeth underwent longitudinal splitting and grooving in the coronal, middle, and apical thirds, and then, the samples were taken for scanning electron microscopy to evaluate the amount of smear layer removal in each third. RESULTS: The middle and coronal thirds Showed that almost similar efficacy to remove smear layer in both Group II and Group III. At the apical third, Group III showed comparatively better results than Group I, II, and IV, respectively. CONCLUSION: Equal amount of smear layer was seen with EndoActivator and PATS Vario system when used as sonic irrigation devices.

Asunto(s)

RESUMEN

BACKGROUND: Mandibular second premolar agenesis is a common problem in orthodontics and is often treated in conjunction with maxillary counterbalancing extractions. However, in cases without maxillary crowding or dental protrusion, space closure may pose challenges leading to compromised occlusal results or patient profile. Multiple techniques have been described to treat these patients; nevertheless, there is a paucity of data comparing effectiveness of space closure utilizing various anchorage techniques. The goal of this study is to assess the effectiveness of the Herbst device during mandibular molar protraction and compare it to the use of temporary anchorage device (TADs) in patients with mandibular second premolar agenesis. MATERIALS AND METHODS: This retrospective study included 33 patients with mandibular premolar agenesis treated without maxillary extractions. Of these patients, 21 were treated with protraction Herbst devices and 12 with TADs. Changes in molar and incisor positions, skeletal base positions and occlusal plane angulations were assessed on pretreatment (T0) and post-treatment (T1) lateral cephalograms. Scans/photographs at T0 and T1 were used to evaluate canine relationship changes representing anchorage control. Space closure and breakage/failure rates were also compared. Data was analyzed with paired and unpaired t-tests at the significance level of 0.05. RESULTS: Within the Herbst group, changes in mandibular central incisor uprighting and mandibular molar crown angulations were statistically significant. However, no significant differences were noted between the Herbst and TAD groups. Protraction rates as well as overall treatment times were comparable (0.77 mm/month vs. 0.55 mm/month and 3.02 years vs. 2.67 years, respectively). Canine relationships were maintained or improved toward a class I in 82.85% of the Herbst sample, compared to in 66.7% of the TAD sample. Emergency visits occurred in 80.1% of the Herbst group, with cementation failures or appliance breakages as the most common reasons. CONCLUSION: The Herbst device could be a viable modality in cases with missing mandibular premolars where maximum anterior anchorage is desired, or if patients/parents are resistant to TADs. Furthermore, they could be beneficial in skeletal class II patients with mandibular deficiency who also need molar protraction. However, the increased incidence of emergency visits must be considered when treatment is planned.

Asunto(s)

RESUMEN

BACKGROUND: Recently, prosthodontic approaches involve more conservative procedures that include less invasive finish line preparations that use less ceramic thickness. AIM OF THE STUDY: This in vitro study aimed to evaluate the effect of vertical preparation and modified vertical preparation designs on the marginal adaptation and fracture resistance of two types of ceramic crowns using CAD/CAM technology. MATERIALS AND METHODS: Two typodont maxillary first premolars were embedded in acrylic resin. Forty positive replicas of epoxy resin dies were used that were divided into two groups depending on the preparation design (n = 20); Group V (Vertical): dies with feather edge finish line and Group MV (Modified vertical): dies with feather edge finish line, where a reverse shoulder of 1 mm depth was placed on the buccal surface 1.5 mm from the occlusal surface. Each group was further subdivided into two subgroups according to the type of ceramic material (n = 10): Subgroup Va and subgroup MVa for lithium disilicate (e.max CAD) and subgroup Vb and subgroup MVb for zirconia (zolid ht+). Crown restorations were made with CAD-CAM technology. The marginal adaptation was assessed using a stereomicroscope both prior to cementation and after cementation and aging. Fracture resistance was tested with a universal testing machine, and the data were statistically analyzed. RESULTS: Marginal adaptation showed no significant differences between subgroups before or after cementation and aging. Three-way ANOVA indicated that preparation design (p = 0.516) and material (p = 0.269) had no significant effect, but cementation had a significant effect (p < 0.0001) on the marginal adaptation. According to two-way ANOVA test, Subgroup (MVb) showed the highest result followed by subgroup (Vb) and subgroub (MVa) and the least was subgroub (Va). Fracture modes showed no significant differences among the subgroups (p = 0.982). CONCLUSIONS: Marginal adaptation of lithium disilicate and zirconia crowns remained clinically acceptable regardless of preparation design. While the modified vertical preparation with a reverse shoulder notably enhanced the fracture resistance of both materials, with zirconia demonstrating superior fracture resistance compared to lithium disilicate with average values exceeding premolar biting force.

Asunto(s)

RESUMEN

OBJECTIVES: To compare the buccal and palatal bone changes of maxillary posterior teeth produced by hybrid hyrax (HH) and conventional hyrax (CH) expanders in growing patients. MATERIAL AND METHODS: A sample of 32 patients with posterior crossbites in the late mixed dentition was recruited and randomly allocated into two groups. Group HH was composed of 18 individuals with a mean age of 10.7 years (six female, 12 male) treated with a hybrid expander with two anterior parasagittal miniscrews. Group CH was composed of 14 individuals with a mean age of 11.4 years (six female, eight male) treated with a conventional Hyrax expander. Cone-beam computed tomography (CBCT) exams were obtained before expansion (T1) and after 11 months when the expander was removed (T2). Buccal and palatal bone plate thickness and height of maxillary posterior teeth were measured. Intergroup comparisons were performed using t or Mann-Whitney tests (P < .05). RESULTS: The CH group showed greater decreases of the buccal bone plate height (mean change: 1.27 mm) at the maxillary first premolars compared to the HH group (mean change: 0.11 mm, P = .001). No intergroup difference was found for changes in the buccal and palatal bone thickness. CONCLUSIONS: Hybrid expanders showed a tendency to cause less negative impact on the buccal bone plate height of first premolars compared to conventional Hyrax expanders. However, the difference was not clinically significant. Both hybrid and conventional Hyrax expanders are safe for the alveolar bone morphology in the late mixed dentition.

Asunto(s)

RESUMEN

BACKGROUND: Partial coverage concepts have met the main goal of conservative dentistry. Vonlays, which combine features of veneers and onlays, are a recent alternative to full coverage designs and overlay partial coverage restorations. This in vitro study was conducted to compare the fracture resistance of the newly introduced pressable zirconia-reinforced lithium silicate with pressable lithium disilicate ceramic and to determine the optimal preparation design for partial coverage on upper premolars. METHODS: Fifty-two duplicated epoxy resin dies were prepared following vonlay and overlay preparation guidelines. For each preparation (n = 26), the specimens were divided into two subgroups to be restored with lithium disilicate (IPS e.max Press) or zirconia-reinforced lithium silicate (Vita Ambria) (n = 13 each). Ceramic vonlays and overlays were bonded using dual cure resin cement, subjected to thermomechanical fatigue, and the load to fracture was tested by using a universal testing machine. The specimens were fractographically analyzed via scanning electron microscopy (SEM). The normality of the fracture resistance data was checked using the Shapiro‒Wilk test and Q‒Q plots, and two-way ANOVA was used to assess the effect of the type of preparation and ceramic material on the fracture resistance. RESULTS: The group of overlays restored with zirconia-reinforced lithium silicate showed the highest mean fracture load (1218.69 N), while the group of vonlays restored with lithium disilicate had the lowest mean fracture resistance (967.15 N). The effect of preparation design and material type on fracture resistance was significant for both factors, p = 0.003 and p < 0.0001, respectively. Different features of the fracture surfaces, such as arrest lines, hackles, and directions of crack propagation, were observed. CONCLUSIONS: Zirconia-reinforced lithium silicate exhibited greater resistance to fracture compared to lithium disilicate, making it a potential substitute for partial coverage restorations. Additionally, the overlay showed superior fracture resistance when compared to the vonlay preparation design.

Asunto(s)

RESUMEN

Advances in computer-aided design/computer-aided manufacturing (CAD-CAM) technologies and adhesives have enabled the use of endocrowns as an effective and conservative treatment option for restoring endodontically treated teeth in pediatric populations. Thus, this case report presents the treatment of a severely damaged premolar tooth with coronal pulpotomy and a 3D-printed endocrown restoration. A 13-year-old patient with pain due to profound caries in the left maxillary second premolar tooth was referred to the Department of Pediatric Dentistry at Gazi University in Ankara, Türkiye. Deep dentinal caries and severe tissue loss were revealed in the clinical examination. No periradicular lesions were detected in a radiographic examination, and there was no inflammation in the pulp. The selected intervention was a two-step process involving a coronal pulpotomy followed by a custom 3D-printed endocrown restoration. No clinical complications or radiographic pathologies were observed over a two-year follow-up period, and the patient was satisfied with the final esthetics and function of the restoration. 3D-printing technology can be successfully integrated into pediatric restorative dentistry and offers a conservative, efficient, and esthetically pleasing treatment option for children with severely damaged dentition.

Asunto(s)

RESUMEN

BACKGROUND: Tyrosine-rich amelogenin peptide (TRAP) is the main amelogenin digestion product in the developmental enamel matrix. It has been shown to promote remineralization of demineralized enamel in our previous study. However, direct evidence of the effect of TRAP on the morphology and nanostructure of crystal growth on an enamel surface has not been reported. This study aimed to examine the effect of TRAP on the morphology of calcium phosphate crystals grown on early enamel erosion using a pH-cycling model. METHODS: Eroded lesions were produced in human premolars by 30-second immersion in 37% phosphoric acid. Forty-five samples of eroded human premolar enamel blocks were selected and randomly divided into 3 groups: deionized water (DDW, negative control); 100 µg/mL TRAP, and 2 ppm sodium fluoride (NaF, positive control group). For 14 days, the specimens were exposed to a pH-cycling model. Using scanning electron microscopy (SEM) and atomic force microscopy (AFM) methods, the surface morphology, calcium-phosphorus ratio, and enamel surface roughness were examined. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR) were used to assess crystal characteristics. RESULTS: After pH-cycling, compared to the two control groups, the surface of the eroded enamel of the peptide TRAP group shows a large number of new, densely arranged rod-like crystals, parallel to each other, regularly arranged, forming an ordered structure, with crystal morphology similar to that of natural enamel. The crystals are mostly hydroxyapatite (HA). CONCLUSION: This study demonstrates that the peptide TRAP modulates the formation of hydroxyapatite in eroded enamel and that the newly formed crystals resemble natural enamel crystals and promote the remineralization of enamel, providing a promising biomaterial for remineralization treatment of enamel lesions.

Asunto(s)

RESUMEN

BACKGROUND: White spot lesions are a widespread undesirable effect, especially prevalent during fixed orthodontic treatments. The study compared the in vitro enamel remineralization potential of undemineralized dentin matrix (UDD) versus chicken eggshell powder (CESP) for artificially induced enamel lesions. METHODS: 100 caries-free and sound maxillary premolars were randomly divided into four groups each contain 25 teeth: Group I (Baseline): No treatment was done to the enamel surface. Group II (Negative control ): The enamel surface of the teeth underwent demineralization using demineralizing solution to create artificial carious lesions then kept in artificial saliva. Group III (CESP treated): After demineralizing the tooth surface, the teeth have been suspended in the CESP remineralizing solution. Group IV (UDD treated): After enamel demineralization, the teeth were suspended in UDD remineralizing solution. The remineralization potential was assessed by Vickers microhardness testing, scanning electron microscopic examination (SEM), and energy dispersive X-ray (EDX). RESULTS: The current study demonstrated an increase in the mean microhardness of CESP and UDD-treated groups; however, It was nearer to the baseline level in the UDD group. SEM imaging revealed greater enamel remineralization in the UDD group compared to the remaining groups. The UDD group disclosed complete coverage for the prismatic enamel compared to the CESP group, which revealed a partially remineralized enamel surface. Interestingly, the Ca/P ratio increased significantly in the CESP group compared to the negative control group. In contrast, a higher significant increase in the mean Ca/P ratios was recorded in the UDD group compared to the test groups. CONCLUSION: biomimetic UDD and CESP powder should be utilized to treat enamel early carious lesions. However, UDD demonstrated the most significant remineralization potential.

Asunto(s)

Asunto(s)

RESUMEN

BACKGROUND: It is still unclear whether the trabecular structure of the jaw is different in individuals with hypodontia than in those without hypodontia; this is important for clinicians. The aim was to determine whether the mandibular trabecular bone structure of children and adolescents with hypodontia differs from the control group by using the fractal analysis (FA) method in this study. METHODS: A total of 138 panoramic radiographs of 69 cases and 69 control subjects (mean age 13.2 ± 10.1) were evaluated. The age and gender of subjects in the case and control groups were matched. Three regions of interest (ROIs) were selected from the panoramic radiographs. ROI1 refers to the center of the ramus rising above the mandibular foramen. ROI2 refers to the area between the apical level of the mandibular molar and the upper border of the mandibular canal. ROI3, the missing tooth region, refers to the apical third of the mesial side of the erupting or fully erupted permanent mandibular first molar. Mann-Whitney U and Wilcoxon tests were used. p < 0.05 was accepted for the significance value. RESULTS: The mean fractal dimension (FD) values of ROI1, ROI2, and ROI3 were 1,25, 1,20, and 1,13, respectively. The means FD values obtained from the ramus region were higher than the other regions (p < 0.05). The FD values did not differ significantly according to gender and age (p > 0.05). The FD values of the case group were lower than the control group for ROI3 (p < 0.05). CONCLUSION: The results of this study showed that the mandibular trabecular bone quality of pediatric patients with one missing tooth was different from the healthy group. The difference in the mean FD values from the ROIs indicates that the ramus has a denser structure than the mandibular corpus. Clinicians should factor this into their dental treatment planning process.

Asunto(s)

RESUMEN

The purpose of this study was to evaluate the efficacy of different techniques in removing calcium silicate intracanal medicament (Bio-C Temp). Forty human single-canaled premolars were randomly distributed into five groups (n = 8). All root canals were instrumented, then filled with Bio-C Temp. Following 1-week incubation, the intra-canal medicament was removed using one of five techniques according to tooth group: conventional syringe irrigation, Endo Activator, passive ultrasonic irrigation (PUI), ProTaper Universal F3 and XP-endo Finisher (XPF). Micro-CT scanning was performed before and after removal of Bio-C Temp. All techniques significantly reduced the volume of Bio-C Temp (p < 0.001) without reaching complete elimination. The percentage of Bio-C Temp removed was significantly higher in the XPF group (98.2%) compared to conventional syringe irrigation (70.6%), the Endo Activator (75.7%), and the ProTaper Universal (76.6%). There was no significant difference between the XPF and PUI (95.1%) groups. None of the removal techniques were able to completely remove Bio-C Temp from the root canal. However, XPF was the most effective method, but was not statistically significant when compared to PUI. Clinical Relevance: This study demonstrated that both XPF and PUI outperform conventional irrigation in removing Bio-C Temp intracanal medicament.

Asunto(s)

RESUMEN

OBJECTIVES: This study aimed to evaluate and compare the impact of cigarette smoking (CS) and heated tobacco (HT) on the alteration of color and ultrastructural characteristics of human enamel and cementum. BACKGROUND: According to tobacco companies, a less harmful substitute for CS is HT products. Nevertheless, comprehensive research on the effects of HT on tooth structures has been lacking. This study aimed to evaluate and compare the impact of CS and HT on the alteration of color and ultrastructural characteristics of human enamel and cementum. MATERIALS AND METHODS: Thirty intact and noncarious human maxillary premolars extracted for orthodontic treatment purposes, previously disinfected, were used in the study. The specimens were randomly separated into six groups (n = 10), as follows: Group 1: enamel without smoking exposure; Group 2: enamel exposed to CS; Group 3: enamel exposed to HT; Group 4: cementum without smoking exposure; Group 5: cementum exposed to CS; and Group 6: cementum exposed to HT. The measurement of color change was conducted using a spectrophotometer. The surface alterations and mineral composition of enamel and cementum were evaluated using scanning electron microscopy and energy-dispersive X-ray spectroscopy. ANOVA test followed by Tukey's post hoc test was used to determine significant differences between groups. RESULTS: Results showed that CS had a more pronounced effect on enamel and cementum color changes than HT. The impact of CS and HT on color changes was more evident in cementum than in enamel. Surface morphology of enamel and cementum showed alterations in histology following exposure to both smoking types. Moreover, the mineral content experienced a significant reduction after using CS and HT. The reduction in calcium content after CS and HT exposure was similar. However, HT led to a significant decrease in the phosphorus content of enamel when compared with CS. At the same time, CS exposure in cementum resulted in a more significant reduction in Ca/P ratio than HT. CONCLUSIONS: Although HT may appear to present a lower danger to hard dental tissues than CS, it is not entirely harmless. CS results in more color changes on the enamel and cementum of teeth. Both smoking methods affected the mineral content of teeth, with CS having a significant effect on the roots, while HT significantly affected the crowns' mineral composition.

Asunto(s)

RESUMEN

In recent years, dental implants have become a trend in the treatment of human patients with missing teeth, which may also be an acceptable method for companion animal dentistry. However, there is a gap challenge in determining appropriate implant sizes for different dog breeds and human. In this study, we utilized skull computed tomography data to create three-dimensional models of the mandibles of dogs in different sizes. Subsequently, implants of various sizes were designed and subjected to biomechanical finite element analysis to determine the optimal implant size. Regression models were developed, exploring the relationship between the average weight of dogs and the size of premolar implants. Our results illustrated that the regression equations for mean body weight (x, kg) and second premolar (PM2), third premolar (PM3), and fourth premolar (PM4) implant length (y, mm) in dogs were: y = 0.2785x + 7.8209, y = 0.2544x + 8.9285, and y = 0.2668x + 10.652, respectively; the premolar implant diameter (mm) y = 0.0454x + 3.3506, which may provide a reference for determine suitable clinical implant sizes for dogs.

Asunto(s)

RESUMEN

AIM: This study aimed to compare the effectiveness of initial irrigation with sodium hypochlorite (NaOCl) and final irrigation with QMix, 40% citric acid, and 17% ethylenediaminetetraacetic acid (EDTA) on smear layer removal and dentin erosion. METHODOLOGY: Forty extracted human mandibular premolar teeth were randomly divided into four groups (n = 10) according to the type of final irrigants used: 17% EDTA, QMix, citric acid, and control (normal saline). Canals were mechanically prepared using ProTaper Next instruments to an apical size of X3. Subsequently, the roots were sectioned in a buccolingual direction. Scanning electron microscopy (SEM) was used to assess the presence of the smear layer and the amount of dentin erosion in the coronal, middle, and apical thirds of the root canals. RESULTS: In regards to smear layer removal, there was a significant difference between the control group and the other tested groups. Moreover, it was significantly higher in the coronal and middle thirds than in the apical third. However, there were no significant differences between the groups of EDTA, QMix, and citric acid. Concerning dentin erosion, citric acid produced significantly more dentin erosion than the other tested groups. CONCLUSION: Final irrigation with solutions had a higher ability to remove the smear layer in the coronal and middle thirds compared to the apical third. Of all the solutions tested, 40% citric acid had the most pronounced impact on dentin erosion, followed by 17% EDTA and QMix.

Asunto(s)

RESUMEN

BACKGROUND: To evaluate the accuracy of the electronic apex locators (EALs), and Cone-Beam Computed Tomography (CBCT) scanning, both in working length (WL) determination and in the detection of root canal perforations in retreatment cases. METHODS: Sixty human mandibular premolars were selected. After crown removal partially and canal access, root canals were instrumented and irrigated. The obturation process utilized gutta-percha and sealer with warm vertical compaction. Two groups were distinguished: one without perforation (Group 1) and the other with an apical third perforation (Group 2). Retreatment included filling removal, apical preparation, and irrigation. Actual working lengths (AWL) were determined using a stereomicroscope. CBCT images were used to measure CBCT working length (CWL), with adjustments for optimal views. Propex II and Dentaport ZX were used to measure electronic working length (EWL). Differences between EWL and AWL, as well as CWL, were analyzed to gauge accuracy. Data underwent Two-way ANOVA analysis. Measurements within ± 0.5 and ± 1 mm tolerance ranges were deemed successful for each device, followed by applying the Pearson Chi-square test. RESULTS: The study reveals no significant inter-group variations in device performance (p > .05). Dentaport ZX missed detecting perforation in two Group 2 (apical perforation) cases. For ± 1 mm tolerance, Propex II displayed the highest success in Group 2 (apical perforation). CONCLUSION: This study demonstrates the comparable performance of Propex II, Dentaport ZX, and CBCT in endodontic retreatment, providing insights into diagnostic reliability.

Asunto(s)

RESUMEN

Carnassial teeth, as one of the most important teeth in dogs, are commonly affected by different types of injuries and pathological disorders, which require endodontic treatment. Lateral canals, which leave the main root canal, and apical deltas are present in the root canal system of dogs. These canals represent small branches that leave the main root canal at a sharp angle and terminate in a region of the periodontal ligament on the external root surface. In this study, 200 teeth were included, of which 100 were superior fourth premolars and 100 were inferior first molars. Lateral canals were present in a total of 30 roots of superior fourth premolar teeth, whereas in inferior first molars, these canals were found in 3% of roots. In superior fourth premolars, lateral canals were mostly present in the apical third, 86%, while 14% were present in the middle third of the root. In inferior first molars, lateral canals were found in 3% of the roots, 2% in the apical third and 1% in the middle third of the roots. The knowledge of the complex root canal morphology is essential for any endodontic treatment. Due to the presence and frequency of lateral canals, it is imperative to perform more thorough cleaning and instrumentation while performing endodontic treatment on superior fourth premolars compared to inferior first molars.

Asunto(s)

RESUMEN

OBJECTIVE: The aim of this study was to evaluate the accuracy of a combined approach based on an isotopological remeshing and statistical shape analysis (SSA) to capture key anatomical features of altered and intact premolars. Additionally, the study compares the capabilities of four Machine Learning (ML) algorithms in identifying or simulating tooth alterations. METHODS: 113 premolar surfaces from a multicenter database were analyzed. These surfaces were processed using an isotopological remeshing method, followed by a SSA. Mean Euclidean distances between the initial and remeshed STL files were calculated to assess deviation in anatomical landmark positioning. Seven anatomical features were extracted from each tooth, and their correlations with shape modes and morphological characteristics were explored. Four ML algorithms, validated through three-fold cross-validation, were assessed for their ability to classify tooth types and alterations. Additionally, twenty intact teeth were altered and then reconstructed to verify the method's accuracy. RESULTS: The first five modes encapsulated 76.1% of the total shape variability, with a mean landmark positioning deviation of 10.4 µm (±6.4). Significant correlations were found between shape modes and specific morphological features. The optimal ML algorithms demonstrated high accuracy (>83%) and precision (>86%). Simulations on intact teeth showed discrepancies in anatomical features below 3%. CONCLUSION: The combination of an isotopological remeshing with SSA showed good reliability in capturing key anatomical features of the tooth. CLINICAL SIGNIFICANCE: The encouraging performance of ML algorithms suggests a promising direction for supporting practitioners in diagnosing and planning treatments for patients with altered teeth, ultimately improving preventive care.

Asunto(s)

RESUMEN

OBJECTIVES: Determining the working length (WL) in root canal treatment facilitates the treatment prognosis. The introduction of apex locators and new CBCT devices in dentistry influenced this consideration. This comparative study evaluated the accuracy of working length measurement by cone-beam computed tomography (CBCT) in three fields of view (FOVs), conventional radiography, and the apex locator Raypex 5. METHODOLOGY: The descriptive-analytical study was performed on 40 lower premolar teeth that met the inclusion criteria. Direct observation under the microscope was considered the gold standard and compared with measurements by the electronic apex locator, CBCT, and periapical images. RESULTS: The results were analyzed by paired t-tests and Wilcoxon tests. A significance level of 0.05 was considered in this study. CBCT 5×5 FOV with a p-value of 0.733 and analog radiography with a p-value of 0.001 achieved the working lengths with the highest and lowest accuracy, respectively. In addition, the difference between actual and measured working length using analog radiography was significant (p-value <0.05). CONCLUSIONS: According to the results of this study, CBCT images at different FOVs and those taken by the apex locator Raypex 5 can be used as a reliable method for estimating the working length. (EEJ-2023-10-141).

Asunto(s)

RESUMEN

BACKGROUND: Piezocision is a minimally invasive surgical method aiming to accelerate tooth movement. However, its effect was found to be transient, appertaining to the regional acceleratory phenomenon (RAP). Hence, the aim of the study was to evaluate the effect of single and multiple piezocisions on the rate of orthodontic tooth movement (OTM). Moreover, the impact of both protocols on canine tipping and orthodontically induced inflammatory root resorption (OIIRR) has been assessed. METHODS: Thirty indicated patients for the therapeutic extraction of maxillary first premolars were enlisted in this split-mouth study, and they were randomly split into two equal groups, each including 15 subjects. In the Single Application Group (SAG), one side of the maxillary arch arbitrarily received a single piezocision before the onset of canine retraction, whereas in the Multiple Application Group (MAG), piezocisions were randomly performed on one side, three times on a monthly basis, over the 12-week study period. The contralateral sides of both groups served as the controls. Canine retraction was carried out bilaterally using nickel-titanium closed-coil springs, delivering 150 g of force, and the rate of tooth movement, as well as canine tipping were evaluated on a monthly basis, over a 3-month period. Cone-bean computed tomography scans were also conducted pre- and post- canine retraction, and OIIRR was assessed using Malmgren Index. RESULTS: The reported outcomes revealed a significant increase in the amount of canine retraction, canine tipping, as well as root resorption scores on the experimental sides in both groups SAG and MAG post-retraction (p < 0.001). However, upon comparing the experimental sides in both groups, non-significant differences have been observed between them regarding all the assessed outcomes (p > 0.05). CONCLUSIONS: Single and multiple piezocisions effectively accelerate OTM in comparison to conventional orthodontic treatment, with relative outcomes reported by both intervention frequencies. Accordingly, single piezocision is recommended as an adjunct to OTM. Furthermore, significant tooth tipping as well as a significantly higher root resorption risk accompanies both single and multiple piezocision applications in conjunction with OTM. NAME OF THE REGISTRY: Clinicaltrials.gov TRIAL REGISTRATION NUMBER: NCT05782088 DATE OF REGISTRATION: 23/03/2023 "Retrospectively registered". URL: https://clinicaltrials.gov/ct2/show/NCT05782088.

Asunto(s)

RESUMEN

BACKGROUND: The anatomical proximity between the root apex of the maxillary posterior teeth and the maxillary sinus can lead to complications, including odontogenic maxillary sinusitis. While several studies have investigated similar variables in different populations, there is limited research on the Indonesian population. This study aimed to describe the anatomical position of the maxillary posterior teeth in relation to the floor of the maxillary sinus using CT scans. METHODS: A total of 122 patients (432 maxillary premolars and 1,282 maxillary molars) underwent CT scans to evaluate 1,711 roots. The vertical relationship between the root apex of the maxillary posterior teeth and the maxillary sinus was classified into three types: IS (inside sinus), CO (sinus contact), and OS (outside sinus). RESULTS: The IS type was predominantly found in the palatal roots of the first molars, accounting for 20% of the total roots in this type. The CO type was most frequently observed in the mesiobuccal roots of the second molars, representing 18% of the total roots in this type. The OS type was most commonly found in the first premolar, comprising 20% of the total roots in this type. CONCLUSIONS: The palatal roots of the first molars exhibited the highest frequency of proximity to the maxillary sinus. CT scans can effectively assess the relationship between the root apex of the posterior teeth and the maxillary sinus. CLINICAL RELEVANCE: Clinicians should consider this information comprehensively when planning treatments for maxillary molars.

Asunto(s)