Asunto(s)

RESUMEN

BACKGROUND: Advancements in digital dentistry helped in custom-milling screw-channels in implant-supported restorations; however, the fit of these restorations is still unclear especially for contemporary computer aided designing/computer aided manufacturing (CAD/CAM) materials. This study aimed to compare the internal and marginal fit of Ultra translucent multilayered zirconia versus lithium disilicate implant-supported hybrid abutment crowns (HACs) constructed with custom-milled screw-channels on Titanium-base. MATERIALS AND METHODS: A total of 24 HACs with custom-milled screw-channels were constructed from lithium disilicate (Group LDS) and Ultra translucent multilayered zirconia (Group UT) using digital workflow (n = 12). The internal and marginal gaps of HACs on their corresponding Titanium-bases were assessed using replica technique and stereomicroscope, respectively. After testing for normality, quantitative data were expressed as mean and standard deviation and compared using independent t-test at a level of significance (P ≤ 0.05). RESULTS: There was no statistically significant difference between Group LDS and Group UT in terms of marginal and internal fit. The internal and marginal gaps in both groups were within the accepted values reported in literature. CONCLUSIONS: UT and LDS HACs with custom-milled screw-channels demonstrated comparable and acceptable internal fit and marginal adaptations to Ti-base, which lied within the range reported in literature.

Asunto(s)

RESUMEN

BACKGROUND: Recently, prosthodontic approaches involve more conservative procedures that include less invasive finish line preparations that use less ceramic thickness. AIM OF THE STUDY: This in vitro study aimed to evaluate the effect of vertical preparation and modified vertical preparation designs on the marginal adaptation and fracture resistance of two types of ceramic crowns using CAD/CAM technology. MATERIALS AND METHODS: Two typodont maxillary first premolars were embedded in acrylic resin. Forty positive replicas of epoxy resin dies were used that were divided into two groups depending on the preparation design (n = 20); Group V (Vertical): dies with feather edge finish line and Group MV (Modified vertical): dies with feather edge finish line, where a reverse shoulder of 1 mm depth was placed on the buccal surface 1.5 mm from the occlusal surface. Each group was further subdivided into two subgroups according to the type of ceramic material (n = 10): Subgroup Va and subgroup MVa for lithium disilicate (e.max CAD) and subgroup Vb and subgroup MVb for zirconia (zolid ht+). Crown restorations were made with CAD-CAM technology. The marginal adaptation was assessed using a stereomicroscope both prior to cementation and after cementation and aging. Fracture resistance was tested with a universal testing machine, and the data were statistically analyzed. RESULTS: Marginal adaptation showed no significant differences between subgroups before or after cementation and aging. Three-way ANOVA indicated that preparation design (p = 0.516) and material (p = 0.269) had no significant effect, but cementation had a significant effect (p < 0.0001) on the marginal adaptation. According to two-way ANOVA test, Subgroup (MVb) showed the highest result followed by subgroup (Vb) and subgroub (MVa) and the least was subgroub (Va). Fracture modes showed no significant differences among the subgroups (p = 0.982). CONCLUSIONS: Marginal adaptation of lithium disilicate and zirconia crowns remained clinically acceptable regardless of preparation design. While the modified vertical preparation with a reverse shoulder notably enhanced the fracture resistance of both materials, with zirconia demonstrating superior fracture resistance compared to lithium disilicate with average values exceeding premolar biting force.

Asunto(s)

RESUMEN

Background: Over the past decade, 3D printing technology has revolutionized various fields, including dentistry. Provisional restorations play a crucial role in prosthetic rehabilitation, necessitating the evaluation of their bond strength with different provisional cement agents. Aims: This study is aimed at assessing the immediate and long-term bond strength of 3D-printed dental crowns using three provisional cement agents. Materials and Methods: Provisional crowns (N = 36) were manufactured using 3D modeling software and cemented in dentin analogues (G10 Nema resin). After the crowns' fabrication, they were randomly divided into three groups (n = 12) for cementation with Relyx Temp 3M ESPE, Provicol-VOCO, and Meron-VOCO. Tensile strength tests were conducted using a universal testing machine, with half of the specimens subjected to 2000 thermal cycles before testing. Finite element analysis was employed to assess tensile stress distribution. Results: Statistical analysis (two-way ANOVA and Tukey's test at a 95% confidence level) revealed significant effects of cement type (p = 0.006) and thermal aging (p = 0.001) on bond strength. Glass ionomer cement exhibited the highest immediate resistance, while all types of cement were adversely affected by thermal aging, resulting in decreased bond strength. Conclusion: Thermal aging significantly alters the properties of 3D printing resin and affects the bond strength of provisional cement with 3D-printed crowns. Despite the adverse effects of thermal aging, glass ionomer cement demonstrated the highest immediate resistance. Clinicians should carefully consider these findings when selecting provisional cements for 3D-printed crowns.

Asunto(s)

RESUMEN

BACKGROUND: The accuracy of intraoral scanning is critical for computer-aided design/computer-aided manufacturing workflows in dentistry. However, data regarding the scanning accuracy of various adjacent restorative materials and intraoral scanners are lacking. This in vitro study aimed to evaluate the effect of adjacent restorative material type and CEREC's intraoral scanners on the accuracy of intraoral digital impressions for inlay cavities. METHODS: The artificial tooth was prepared with an occlusal cavity depth of 2 mm, a proximal box width at the gingival floor of 1.5 mm, and an equi-gingival margin extended disto-occlusally at the transition line angle on both the lingual and buccal sides for an inlay restoration. The adjacent teeth were veneered with crowns made of gold and zirconia, and an artificial tooth (resin) was utilized as the control group. The inlay cavity and adjacent teeth (Gold, Zirconia, and resin) were scanned 10 times using Chairside Economical Restoration of Esthetic Ceramics (CEREC) Primescan (PS), Omnicam (OC), and Bluecam (BC). A reference scan was obtained using a laboratory scanner (3-shape E3). Scanning was performed according to the manufacturer's instructions, including powder application for the BC group. Standard tesselation language files were analyzed using a three-dimensional analysis software program. Experimental data were analyzed using a two-way analysis of variance and the Tukey's post-hoc comparison test. RESULTS: The restorative materials of the adjacent teeth significantly affected the accuracy of the intraoral digital impressions (p < .05). The zirconia group exhibited the highest trueness deviation, followed by the resin and gold groups, with each demonstrating a statistically significant difference (p < .05). The resin group demonstrated the highest maximum positive deviation and deviation in precision. Gold exhibited the lowest average deviation value for trueness compared with those of the other adjacent restorative materials. Intraoral scanner type significantly influenced the trueness and precision of the scan data (p < .05). The average deviation of trueness according to the intraoral scanner type increased in the following order: BC > PS > OC. The average deviation in precision increased in the following order: PS>OC>BC (p < .05). CONCLUSION: The restorative materials of the adjacent tooth and the type of intraoral scanner affect the accuracy of the intraoral digital impression. The trueness of the digital images of the BC group, obtained by spraying the powder, was comparable to that of the PS group. Among the adjacent restorative materials, zirconia exhibited the lowest trueness. In contrast, PS demonstrated the highest precision among the intraoral scanners, while resin displayed the lowest precision among the adjacent restorative materials.

Asunto(s)

RESUMEN

PURPOSE: Numerous studies report on the outcome performance of posterior composite restorations. However, there are fewer studies providing data for anterior restorations. The aim of this study was to evaluate the clinical outcome performance of anterior permanent restorations by analyzing a large dataset from a German national health insurance company. MATERIALS AND METHODS: Routine claims data from a major German national health insurance company were assessed. Fee codes were used for tracing restoration careers on a day-count basis. The treatment was defined as a placed restoration (Class III and IV) on a mesial or distal tooth surface, irrespective of the extension. The restorations were placed between January 1, 2010 and December 31, 2013. Statistical analyses were conducted using Kaplan-Meier survival analysis to determine cumulative 4-year survival rates. The primary outcome was re-intervention on the same surface. Secondary outcomes were crowning and extraction which were analyzed separately. RESULTS: A total of 2,417,791 restorations involving mesial surfaces and a number of 2,409,031 restorations involving distal surfaces were observed. At 4 years, the cumulative survival rates concerning the primary outcome 're-intervention' were 79.9% for mesial and 80.9% for distal restorations. The respective annual failure rates (AFR) were 5.5% and 5.2%. Four-year survival rates for the secondary outcome 'crown' were 93.8% for mesial and 94.1% for distal anterior restorations. The respective AFRs were 1.6% and 1.5%. For the secondary outcome 'extraction,' the respective rates were 94.6% for mesial and 93.9% for distal restorations. The respective AFRs were 1.4% and 1.6%. CONCLUSION: The performance of permanent anterior restorations which were placed in general dental practices in Germany can be rated as acceptable.

Asunto(s)

RESUMEN

Monolithic zirconia (MZ) crowns are widely utilized in dental restorations, particularly for substantial tooth structure loss. Inspection, tactile, and radiographic examinations can be time-consuming and error-prone, which may delay diagnosis. Consequently, an objective, automatic, and reliable process is required for identifying dental crown defects. This study aimed to explore the potential of transforming acoustic emission (AE) signals to continuous wavelet transform (CWT), combined with Conventional Neural Network (CNN) to assist in crack detection. A new CNN image segmentation model, based on multi-class semantic segmentation using Inception-ResNet-v2, was developed. Real-time detection of AE signals under loads, which induce cracking, provided significant insights into crack formation in MZ crowns. Pencil lead breaking (PLB) was used to simulate crack propagation. The CWT and CNN models were used to automate the crack classification process. The Inception-ResNet-v2 architecture with transfer learning categorized the cracks in MZ crowns into five groups: labial, palatal, incisal, left, and right. After 2000 epochs, with a learning rate of 0.0001, the model achieved an accuracy of 99.4667%, demonstrating that deep learning significantly improved the localization of cracks in MZ crowns. This development can potentially aid dentists in clinical decision-making by facilitating the early detection and prevention of crack failures.

Asunto(s)

RESUMEN

A patient presented desiring to improve her esthetics and reduce masseter muscle pain prior to her upcoming wedding. Although the patient had a full-mouth rehabilitation with porcelain restorations at age 16, she presented with extensive overjet, unbalanced occlusion, and lack of contact from premolar to premolar. The clinician was faced with the challenge of determining the best course of treatment. After completing thorough record-taking and a detailed analysis following a systematic approach, the clinician developed a facially driven treatment plan that was carried out over eight phases. The patient's existing crowns were replaced at a reduced vertical dimension of occlusion, esthetics were enhanced, muscle pain was relieved, and her goals were achieved.

Asunto(s)

RESUMEN

This study aims to retrospectively evaluate the differences in dental treatments rendered in general anesthesia (GA) for patients who did or did not receive application of silver diamine fluoride (SDF) prior to GA. 1559 patients (≤6 years) who completed treatment with GA for caries at University of California San Francisco (UCSF) between 2015 and 2019 were included in the study. At baseline patients' electronic health record was reviewed to collect planned treatment, complete dental treatment and demographics. Patients were identified as SDF group (N = 335, 21.49%) or comparison (N = 1224, 78.51%). Dental treatments rendered were compared between the SDF and comparison group with multi-variable regression, including variables for demographics and clinical findings at baseline. The initial analysis identified variations in gender, age, dental pain, pulp involvement, and initial treatment plans between the SDF and comparison groups at baseline. In an unadjusted analysis, the SDF group displayed a statistically significant increase in the number of crown procedures but a notable decrease in the number of pulp therapy and extraction treatments completed (p < 0.05). An adjusted multivariable model affirmed the inverse relationship between SDF application and completion of pulp therapy and extractions at the time of GA (p < 0.05). No significant association was identified with the total number of crowns needed and SDF. The model further indicated a positive correlation between the total count of pulp therapy and extractions completed with patient age and the wait-time for GA. In conclusion, pre-GA application of SDF to carious primary teeth is negatively correlated with completed pulp therapy and extraction. SDF application prior to dental treatment with GA may be a valuable tool to reduce invasive dental procedures in GA.

Asunto(s)

RESUMEN

Advances in computer-aided design/computer-aided manufacturing (CAD-CAM) technologies and adhesives have enabled the use of endocrowns as an effective and conservative treatment option for restoring endodontically treated teeth in pediatric populations. Thus, this case report presents the treatment of a severely damaged premolar tooth with coronal pulpotomy and a 3D-printed endocrown restoration. A 13-year-old patient with pain due to profound caries in the left maxillary second premolar tooth was referred to the Department of Pediatric Dentistry at Gazi University in Ankara, Türkiye. Deep dentinal caries and severe tissue loss were revealed in the clinical examination. No periradicular lesions were detected in a radiographic examination, and there was no inflammation in the pulp. The selected intervention was a two-step process involving a coronal pulpotomy followed by a custom 3D-printed endocrown restoration. No clinical complications or radiographic pathologies were observed over a two-year follow-up period, and the patient was satisfied with the final esthetics and function of the restoration. 3D-printing technology can be successfully integrated into pediatric restorative dentistry and offers a conservative, efficient, and esthetically pleasing treatment option for children with severely damaged dentition.

Asunto(s)

RESUMEN

OBJECTIVES: To investigate the supragingival microbiome surrounding dental implants and neighbouring tooth in periodontitis history and periodontally healthy patients. METHODS: Subjects with a history of periodontitis (test) and periodontally healthy subjects (control) received one of two types of dental implants with different surface characteristics: sandblasted acid-etched (SLA) or precision dimension laser-treated (PDL). Periodontal clinical measurements were collected at baseline (V1), 3 months after implant placement (V4), at zirconia crown placement (V6) and 3 months after zirconia crown placement (V8). Supragingival bacterial microbiota was studied using Illumina MiSeq sequencing. RESULTS: Supragingival microbial community on SLA implants in test group significantly differed to control group at V8 (p < 0.05). A longitudinal shift displaying microbial dysbiosis occurred on SLA implants (p < 0.05) and adjacent teeth (p < 0.05) among test patients from V6 to V8. On PDL implants and the adjacent tooth, no significant difference between test and control groups from V6 to V8 (p > 0.05). Co-occurrence network in test group of SLA implants and the adjacent tooth at V8 showed increased disease-associated bacteria and reduced health-associated bacteria. Health-associated bacteria were dominant in control group of SLA implants at V8. CONCLUSION: The surface characteristics and prosthetic components of dental implants may be important risk factors in patients with a history of periodontitis. CLINICAL RELEVANCE: Dysbiosis of supragingival microbiome may predispose dental implants to peri-implant diseases. Thus, a strict supportive periodontal care plan is imperative to prevent early onset of biological complications.

Asunto(s)

RESUMEN

OBJECTIVE: To assess radiographic, clinical and patient-reported outcomes of single zirconia implant-supported crowns on titanium base abutments (TBA) over a 7.5-year period. METHODS: Twenty-four patients received bone-level titanium implants and screw-retained zirconia implant crowns utilising TBA. Marginal bone level (MBL), clinical parameters (probing depth-PD, bleeding on probing-BoP, plaque control record-PCR), technical complications (USPHS criteria) and patient satisfaction were assessed at crown delivery (baseline), 1 year (FU-1) and at 7.5 years (FU-7.5) of follow-up. RESULTS: Eighteen patients were available for re-examination at 7.5 years. The mean MBL at FU-7.5 (0.35 ± 0.20mm) did not significantly change compared to baseline (0.54 ± 0.39, p=.352) and to FU-1 (0.54 ± 0.45mm, p=0.524). From baseline to 7.5 years, the mean PD increased significantly, from 3.0 ± 0.6mm to 3.7 ± 0.8mm (p=0.005). However, BoP and PCR did not significantly change; (BOP: from 27.1 ± 20.7% to 25.0 ± 20.0%, p=0.498; PCR: from 11.1 ± 21.2% to 25.0 ± 25.1%, p=0.100). Nine patients presented with more than one bleeding site. This denoted a peri-implant mucositis prevalence of 50%, whilst none of the implants presented peri-implantitis. One incidence of minor and major ceramic chipping were reported on 2 out of the 18 crowns, resulting in a prosthetic survival rate of 94.4%. Seventeen patients were highly satisfied with their result. CONCLUSION: Single implant-supported zirconia crowns on TBA displayed: (i) minor number of technical complications, (ii) high prosthetic survival rate, (iii) stable marginal bone level and (iv) high patient satisfaction at 7.5 years. CLINICAL IMPLICATIONS: Titanium base abutments despite their high use in clinical practice, lacked medium- and long-term studies. The presented findings highlight their clinical performance at 7.5 years as they display satisfying radiographic, clinical and patient-related outcomes. TBA appear to be a suitable abutment choice for medium-term implant-supported restorations.

Asunto(s)

RESUMEN

OBJECTIVES: The present parallel randomized clinical trial aimed to assess, after a 3-year follow-up period, whether the choice of surgical technique-either manual or guided-and of the operator - non-expert operator or skilled - can affect the stability of peri­implant marginal bone levels in implants placed 1 mm sub-crestal. MATERIALS AND METHODS: Patients received platform-switched implants (Anyridge, MegaGen Implant Co., Gyeongbuk, South Korea) featuring a 5-degree internal conical connection and supporting single screw-retained fixed crowns. The implants were randomly assigned to be placed through a digitally static guided surgery procedure (Test group - GS) or a freehand surgical technique (Control Group - FH). A non-expert operator (fewer than 20 implants placed in his professional activity) was selected to perform procedures for the GS Group, while a skilled operator (with over 1000 implants placed in his professional activity) was chosen for the FH Group. Marginal bone level (MBL) was measured at prosthesis installation (t0) and at 1 (t1), 2 (t2) and 3 years (t3) of follow-up. Changes in MBL from t0 to t3 were analyzed through periapical radiographs. Moreover, MBL changes at all time points were correlated to different supra-crestal soft tissue heights (STH): less than 3 and ≥ 3 mm, respectively. RESULTS: 60 implants in 18 patients were examined, with 30 implants allocated to the GS group and 30 to the FH group. The difference in MBL change between the two groups was 0.11 ± 0.22 mm, which was not statistically significant (p = 0.61). At the time of prosthetic loading, the mean MBL for implants with STH less than 3 mm was 0.33 mm higher than implants with STH ≥ 3 mm, though this difference was not statistically significant (P = 0.065). CONCLUSIONS: Digitally static guided implant placement, performed by a non-expert operator, does not limit marginal bone remodeling, when compared to a freehand procedure performed by an experienced operator. CLINICAL SIGNIFICANCE: After correct and careful planning, early marginal bone levels (MBL) around conical connection, platform-switched implants placed sub-crestally may be stable in time. Digital planning and surgery have the potential to assist non-expert clinicians in achieving implant placements with comparable outcomes to those performed by experts.

Asunto(s)

RESUMEN

BACKGROUND: Marginal misfit and surface roughness of customized implant abutments is critical for restorative success. However, little is known about the comparison of misfit and surface roughness of CAD-CAM Zirconium oxide (ZrO), selective laser melting (SLM) Cobalt Chrome (CoCr) and preformed abutments. The aim of the study is to investigate the relation of misfit and micro-roughness of selective laser melting (SLM), preformed and CAD-CAM implant abutments. METHODS: Thirty internal connection, endosseous dental implants (Ø 4.0 mm x 10 mm, Dentium) were mounted in Polymethyl methacrylate vertically. Ten preformed Titanium alloy (Ti) abutments with 1 mm soft tissue height and Ø 4.5 mm were included as controls. Ten each of Y-TZP and SLM-CoCr, abutment/crowns were fabricated using CAD-CAM milling (CAD-CAM-ZrO) and SLM techniques. Surface micro-roughness (Ra) of the fabricated implant abutment/crown was evaluated with a 3D optical non-contact microscope. All implant restorations were torqued to implants (30 Ncm) using a Tohnichi BTGE digital torque gauge and were analyzed with Bruker micro-CT (Skyscan 1173) to detect micro-gaps at pre-selected points at implant abutment interface. The Ra and misfit data were compared using ANOVA, Tukey-Kramer, Kruskal-Wallis test and Pearson correlation (p < 0.05). RESULTS: Mean Ra among SLM CoCr abutments [0.88 (0.09) µm] were lower than CAD-CAM-ZrO and higher than preformed Ti abutments. Horizontal misfit among SLM-CoCr [45.43 (9.41) µm] and preformed Ti [36.87 (13.23) µm] abutments was not statistically different (p > 0.05). Misfit was significantly higher in Y-TZP samples compared to SLM-CoCr (p = 0.031) and preformed Ti abutments (p = 0.01). Preformed Ti abutments showed significantly lower misfit compared to SLM-CoCr abutments (p = 0.01). A positive linear correlation was observed between the surface roughness (Ra) and vertical misfit (r = 0.61, p < 0.05). CONCLUSION: SLM CoCr abutments showed rough surface compared to preformed Ti abutments, while horizontal misfit was comparable among SLM-CoCr and preformed abutments. Misfit was significantly greater in Y-TZP abutments, compared to SLM and preformed abutments. SLM abutment fabrication technique needs further improvement to provide better fit and surface topography.

Asunto(s)

RESUMEN

PURPOSE: This in vitro study aimed to create a graded structured dental crown using 3D printing technology and investigate the fracture resistance and the adaptation of this new design. MATERIALS AND METHODS: A dental crown with a uniform thickness of 1.5 mm was designed, and the exported stereolithography file (STL) was used to manufacture 30 crowns in three groups (n = 10), solid (SC), bilayer (BL), and multilayer (ML) crowns using  3D jet printing technology. Marginal and internal gaps were measured using the silicone replica technique. Crowns were then luted to a resin die using a temporary luting agent and the fracture resistance was measured using a universal testing machine. One-way ANOVA and Tukey post hoc tests were used to compare the fracture resistance and the adaptation of crowns at a significance level of 0.05. RESULTS: Mean marginal and internal gap of the ML group were 80 and 82 mm, respectively; which were significantly (p < 0.05) smaller than BL (203 and 183 mm) and SC (318 and 221 mm) groups. The SC group showed the highest mean load at fracture (2330 N) which was significantly (p < 0.05) higher than the BL (1716 N) and ML (1516 N) groups. CONCLUSION: 3D jet printing technology provides an opportunity to manufacture crowns in a graded structure with various mechanical properties. This study provided an example of graded structured crowns and presented their fracture resistance. SC group had the highest fracture resistance; however, ML had the best marginal and internal adaptation.

Asunto(s)

RESUMEN

OBJECTIVE: To investigate the effectiveness of using YOLO-v5x in detecting fixed prosthetic restoration in panoramic radiographs. STUDY DESIGN: Descriptive study. Place and Duration of the Study: Department of Oral and Maxillofacial Radiology, Eskisehir Osmangazi University, Eskisehir, Turkiye from November 2022 to April 2023. METHODOLOGY: For the labelling of fixed prosthetic restorations, 8,000 panoramic radiographs were evaluated using the YOLO-v5x architecture. In creating the dataset for this study, fixed prosthetic restorations were categorised as dental implant, pontic, crown, and implant-supported crown on dental panoramic radiographs. The labelled images were then randomly split into three groups: 80% for training, 10% for validation, and 10% for testing. The labelled panoramic images constituted the model's training dataset, and leveraging the knowledge acquired during this learning stage, the model generated predictions in the testing phase. RESULTS: The majority of labelling data were dedicated to crown restorations. The precision and sensitivity values of YOLOv5x were 0.99 and 0.98 for crowns, 0.98 and 0.99 for implants, 0.99 and 0.99 for pontics, and 0.99 and 0.99 for implant-supported crowns, respectively. CONCLUSION: The results obtained in this study demonstrate a satisfactory success rate of YOLO-v5x in detecting dental prosthetic restorations. The high precision and sensitivity of the model indicate its strong potential to enhance clinical professional performance and contribute to the development of more efficient dental health services. KEY WORDS: Artificial intelligence, Dentistry, Dental prosthesis, Panoramic radiography.

Asunto(s)

RESUMEN

The clinical failure mode of dental crown ceramics involves radial cracking at the interface, driven by the surface tension generated from the flexure of the ceramic layer on the subsurface. This results in a reduced lifespan for most all-ceramic dental crowns. Therefore, investigating optimal material combinations to reduce stress concentration in dental crown materials has become crucial for future successful clinical applications. The anisotropic complex structures of natural materials, such as nacre, could potentially create suitable strong and damage-resistant materials. Their imitation of natural structural optimisation and mechanical functionality at both the macro- and micro-levels minimises weaknesses in dental crowns. This research aims to optimise cost-effective, freeze-casted bioinspired composites for the manufacture of novel, strong, and tough ceramic-based dental crowns. To this end, multilayer alumina (Al2O3) composites with four different polymer phases were tested to evaluate their bending behaviour and determine their flexural strength. A computational model was developed and validated against the experimental results. This model includes Al2O3 layers that undergo gentle compression and distribute stress, while the polymer layers act as stress relievers, undergoing plastic deformation to reduce stress concentration. Based on the experimental data and numerical modelling, it was concluded that these composites exhibit variability in mechanical properties, primarily due to differences in microstructures and their flexural strength. Furthermore, the findings suggest that bioinspired Al2O3-based composites demonstrate promising deformation and strengthening behaviour, indicating potential for application in the dental field.

Asunto(s)

RESUMEN

PURPOSE: To investigate the influence of temporary cementation and subsequent bonding on the durability during in-vitro aging-simulation and fracture force of resin-based composite crowns. METHODS: Identical molar crowns (n=48, n=8 per group) were milled from resin-based composites and temporarily cemented and finally bonded to human molars. To simulate temporary application, crowns were cemented either with zinc-oxide-eugenol-cement (Tempbond) or with eugenol free zinc-oxide-cement (Tempbond NE). For a first simulation of a long-term provisional clinical application, thermal cycling, and mechanical loading (TCML 2 x 600 x 5°C-55°C, 2 minutes each cycle, distilled water, 240,000 cycles at 50N) was performed. After TCML all crowns were removed, cleaned, and luted either by using etch-and-rinse technique (Vococid, Futurabond U, Bifix QM) or a self-adhesive (Bifix SE) cementation system. A second thermal cycling and mechanical loading (TCML 2 x3,000 x 5°C/55°C, 2 minutes each cycle, distilled water, 1.2 x 106 at 50N) was accomplished to simulate 5 years of clinical application. To assess the survival of the crowns, the failure rates during TCML were documented. As controls, crowns were included without prior provisional cementation. After TCML all crowns were loaded to failure. Failure was categorized as fracture of the crown and partial loosening of the crown. RESULTS: All crowns survived both TCML procedures without any failures. The fracture values after TCML varied between 3,538.0 ± 1,041.2 N and 4,612.0 ± 801.5 N without significant (P= 0.146) differences between the individual groups. No correlation was found between fracture force and type of provisional cementation (zinc-oxide-eugenol vs. zinc-oxide: Pearson: -0.063/P= 0.672) or type of bonding (adhesive vs. self-adhesive: Pearson: -0.151/ P= 0.307). No different failure pattern was observed between the tested systems. CLINICAL SIGNIFICANCE: Regardless of the type of temporary cementation, there was no effect on the in-vitro performance or strength of the final permanently bonded crowns. Resin-based crowns might be bonded with adhesive or self-adhesive systems even after previous temporary cementation.

Asunto(s)

Asunto(s)

RESUMEN

BACKGROUND: The purpose of this in vitro study was to compare and evaluate the stress distribution of maxillary first premolar residual crowns restored with post-core crowns, endocrowns and inlay crowns after deep margin elevation, to explore the fitting restoration for residual crowns using finite element analysis. METHODS: A healthy complete right maxillary first premolar from a male adult was scanned by cone beam computed tomography (CBCT). The finite element model of the tooth was established by reverse engineering software such as Mimics, Geomagic and Hypermesh. On this basis, the residual crown model after deep margin elevation was made, and the experimental group models were divided into three groups, those restored with post core crowns, endocrowns and inlay crowns. Vertical and oblique static loads were applied to the experimental models to simulate the force on the tooth during mastication (the loading position was located in the central fossa of the occipital surface, and the load was 100 N) using Abaqus software. RESULTS: The peak value and distribution of von Mises stress in each part of the experimental model were observed. After deep margin elevation, the peak dentin von Mises stresses were lower than the tensile strength of normal dentin in the post-core crown, endocrown, and inlay crown groups; the lowest stress results were found in the post-core crown group for the dentin, restoration, enamel, and deep margin elevation (DME) layers under vertical and oblique loading. In terms of stress distribution clouds, the peak stresses in the dentin tissue were located in the apical 1/3 of the root after postcore crown restorations for both loads, while stress concentrations were evident in the cervical and root areas after endocrown and inlay crown restorations; regardless of the load and restoration method, the corresponding stress concentration areas appeared at the junction of the DME and dentin tissue at the loading site of the restorations; CONCLUSIONS: Post-core crowns, endocrowns and inlay crowns can be used to restore residual crowns after deep margin elevation, and post-core crowns can better protect the residual tooth tissue.

Asunto(s)