RESUMEN

Background: Pediatric dental treatment is challenging in patients with early childhood caries. For clinician its difficult to manage child and provide good work at the same time. Its necessity to have the best equipments as well as materials. Nowadays, aesthetics play an important role in managing decayed teeth. Zirconia crown is better option but requires excessive preparation. As Bioflx is newly developed crown and has combined stainless steel and zirconia properties. Aim: To assess the clinical performance and child and parental satisfaction of Bioflex crowns compared to zirconia and stainless steel crowns. Methods: In this comparative study of Bioflx crowns with zirconia and stainless steel crowns, children aged three to seven years old will be selected, and 72 primary teeth requiring crowns will be randomly distributed into three groups, n = 24: Group I: Preformed stainless steel crown, control; Group II: Preformed Bioflex crown; Group III: Preformed zirconia crown. Crowns will be evaluated for recurrent caries, plaque accumulation, restoration failure, gingival status opposing tooth wear, and clinicians and parental satisfaction at zero, three, six, and 12 months. Results: Bioflx crown will have better clinical as well as parental satisfaction among zirconia and stainless steel crowns. Conclusions: The Bioflx crown can be used as an alternative economical esthetic full-coronal restoration for primary teeth. Trial registration: CTRI registration number: CTRI/2023/05/052256; Date of registration: May 03, 2023. Protocol version: Two; Date: April 22, 2023.

Asunto(s)

RESUMEN

Immuno-PET is a molecular imaging technique utilizing positron emission tomography (PET) to measure the biodistribution of an antibody species labeled with a radioactive isotope. When applied as a clinical imaging technique, an immuno-PET imaging agent must be manufactured with quality standards appropriate for regulatory approval. This paper describes methods relevant to the chemistry, manufacturing, and controls component of an immuno-PET regulatory filing, such as an investigational new drug application. Namely, the production, quality control, and characterization of the immuno-PET clinical imaging agent, ZED8, an 89Zr-labeled CD8-specific monovalent antibody as well as its desferrioxamine-conjugated precursor, CED8, is described and evaluated. PET imaging data in a human CD8-expressing tumor murine model is presented as a proof of concept that the imaging agent exhibits target specificity and comparable biodistribution across a range of desferrioxamine conjugate loads.

Asunto(s)

RESUMEN

O presente estudo avaliou a qualidade dos preparos para coroas totais confeccionadas em zircônia por sistemas CAD/CAM (computer aided design/computer aided manufacturing). Atualmente, os materiais cerâmicos são os preferidos para restaurações indiretas, por possibilitarem um trabalho resistente e de excelente estética. Entretanto, observa-se que há necessidade de adequação dos preparos cavitários para as restaurações CAD/CAM, em relação a três fatores: o tipo de cimentação, o tipo de material a ser fresado e as dimensões das ferramentas de fresagem. O presente estudo transversal avaliou 357 preparos para coroa total em zircônia, por meio de imagens digitais obtidas em escâner de cinco laboratórios de prótese dentária do Rio de Janeiro no período de 01/10/2018 a 31/11/2018. Foram quantificados os possíveis erros de preparos cavitários em função das limitações de diâmetro das ferramentas de fresagem dos sistemas Ceramill (Amann Girrbach) dos laboratórios incluídos. As imagens dos preparos foram identificadas e relacionadas em um documento Excel e, após realizado o cálculo amostral, uma amostra representativa da população foi selecionada aleatoriamente. Dois examinadores conjuntamente avaliaram se a convergência para oclusal, as áreas retentivas, a borda incisal aguda ou a redução oclusal, a quantidade de desgaste e o término cervical estavam adequados. Após a avaliação, menos de 1% dos preparos atenderam adequadamente a todos os parâmetros, enquanto aproximadamente 20% não atenderam a nenhum. O parâmetro menos atendido foi o término cervical, em 94,1% do total de casos. A conclusão é que os preparos para zircônia CAD/CAM avaliados no estudo não atenderam aos parâmetros estipulados neste estudos.(AU)

The present study evaluated the quality of CAD/CAM (computer aided design/computer aided manufacturing) zirconia-based full crown dental preparations. Ceramics are the most used materials for indirect dental restorations nowadays, since they make a final product both resistant and with excellent in esthetics. However, a need to adapt the dental preparation design for CAD/CAM restorations has been observed, especially regarding three factors: the type of bonding material, the type of material to be milled and the dimensions of the milling burs used in the milling machines. The present transversal study evaluated 357 zirconia-based full crown dental preparations, through digital images obtained with the scanners of five laboratories in Rio de Janeiro between 01/10/2018 and 31/11/2018. The possible errors in the dental preparation process, given the limitations in diameter of the milling burs of their Ceramill (Amann Girrbach) CAD/CAM systems, were quantified. The images of the preparations were identified and listed in an Excel file and, after a sampling process, a representative sample from the population was randomly selected. Two researchers together evaluated if the occlusal convergency, the retentive areas, the sharp incisal border or anatomic occlusal reduction, the amount of reduction and the cervical finish line were adequate. After an statistical analysis, less than 1% of the preparations followed all parameters adequately, while approximately 20% followed none of them. The parameter less followed was the cervical finish line, inadequate in 94,1% of all cases. The conclusion is that the preparations for zirconia-based CAD/CAM full crowns evaluated in this study did not follow the stablished parameters of this study.(AU)

Asunto(s)

RESUMEN

AIM: The purpose of the study was to evaluate and compare the flexural strength of nano-reinforced zirconia feldspathic porcelain, lithium disilicate ceramics, and zirconia. MATERIALS AND METHODS: Ten bar-shaped specimens of computer-aided design (CAD)/computer-aided manufacturing (CAM) zirconia, reinforced feldspathic porcelain, and reinforced lithium disilicate were fabricated in accordance to International Organization for Standardization (ISO 6872; n = 10). Feldspathic porcelain and lithium disilicate ceramic specimens were reinforced with 5, 10, 15, and 20% of zirconia nanoparticles through a customized technique. The specimens were subjected to three-point flexural strength test using universal testing machine (UTM) and examined for crack propagation using a scanning electron microscope (SEM). Oneway analysis of variance (ANOVA) and Tukey test were used to analyze the data (p < 0.05). RESULTS: The flexural strength of feldsphatic porcelain increased with the increase in the concentration of zirconia particles. The mean flexural strength of 5, 10, 15, and 20% nano-zirconia-incorporated lithium disilicate was 93.8, 97.1, 100.6, and 100.8 MPa respectively, and was lower than the control group (221.7 MPa). A significant difference in the flexural strength was found with the incorporation of nano-zirconia particles. CONCLUSION: The flexural strength of zirconia-integrated feld-spathic porcelain increased and lithium disilicate ceramics decreased with the nano-zirconia reinforcement. CLINICAL SIGNIFICANCE: The simplified approach of reinforcing feldspathic porcelain with zirconia nanoparticles can be adapted in clinical situations of higher masticatory forces.

Asunto(s)

RESUMEN

STATEMENT OF PROBLEM: The changes that occur after brushing yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) are unknown. These changes may favor the retention of microorganisms and chemisorption of water, impairing its longevity. OBJECTIVE: The purpose of this in vitro study was to evaluate the effects of a whitening dentifrice on Y-TZP surfaces after simulating 10 years of brushing. MATERIAL AND METHODS: Seventy-two bar-shaped specimens (20×4×1.2 mm) were divided into 4 groups: storage in distilled water (SW, control), brushing with distilled water (BW), brushing with dentifrice (BD), and brushing with whitening dentifrice (BWD). Brushing was conducted using a linear brushing machine (878400 cycles, 0.98 N, soft toothbrush). The mean roughness (Ra) was analyzed with a profilometer and the superficial topography with scanning electron microscopy (SEM) at baseline and after treatment. Crystalline phases were characterized using x-ray diffraction. Baseline and posttreatment Ra were analyzed using the 1-way ANOVA and Tukey HSD multiple comparison test; the paired t test was used for intragroup comparison (all α=.05). RESULTS: The Ra (µm) means (before/after treatment) were SW 0.28/0.28; BW 0.32/0.31; BD 0.28/0.36; BWD 0.30/0.20. No statistically significant difference was found for Ra at baseline (P=.108) than for posttreatment results (P<.001); the BD group had higher Ra values when compared with baseline (P=.019); the BWD group had the lowest values (P<.001). The BD surfaces showed pronounced scratches and detachment of the surface, while BWD showed smoother surfaces; similar crystallographic results among groups were observed. CONCLUSIONS: Brushing Y-TZP with conventional dentifrice increased roughness, while brushing with whitening dentifrice reduced roughness. Neither dentifrice changed the crystallographic phases after brushing.

Asunto(s)

RESUMEN

STATEMENT OF PROBLEM: Indirect composite resins (ICR) are promising alternatives as veneering materials for zirconia frameworks. The effects of core-to-dentin thickness ratio (C/Dtr) on the mechanical property of bilayered veneer ICR/yttria-tetragonal zirconia polycrystalline (Y-TZP) core disks have not been previously studied. PURPOSE: The purpose of this in vitro study was to assess the effects of C/Dtr on the biaxial flexural strength, reliability, and fracture mode of bilayered veneer ICR/ Y-TZP core disks. MATERIAL AND METHODS: A total of 180 bilayered 0.6-mm-thick composite resin disks in core material and C/Dtr of 2:1, 1:1, and 1:2 were tested with either core material placed up or placed down for piston-on-3-ball biaxial flexural strength. The mean biaxial flexural strength, Weibull modulus, and fracture mode were measured to evaluate the variation trend of the biaxial flexural strength, reliability, and fracture mode of the bilayered disks with various C/Dtr. One-way analysis of variance (ANOVA) and chi-square tests were used to evaluate the variation tendency of fracture mode with the C/Dtr or material placed down during testing (α=.05). Light microscopy was used to identify the fracture mode. RESULTS: The mean biaxial flexural strength and reliability improved with the increase in C/Dtr when specimens were tested with the core material either up and down, and depended on the materials that were placed down during testing. The rates of delamination, Hertzian cone cracks, subcritical radial cracks, and number of fracture fragments partially depended on the C/Dtr and the materials that were placed down during testing. CONCLUSION: The biaxial flexural strength, reliability, and fracture mode in bilayered structures of Y-TZP core and veneer ICR depend on both the C/Dtr and the material that was placed down during testing.

Asunto(s)

RESUMEN

INTRODUCTION: The resistance of three different substructure materials - metal (Cr-Co), zirconium (Zr), and ceramics (IPS Empress II) - was measured by sticking them to dentine with two different resin cements, a dual-cure resin cement (Panavia F 2.0 Light) and a self-adhesive resin cement (BisCem). MATERIALS AND METHODS: In an in vitro study, 72 central upper front teeth were selected with no decay or apparent breakage and with complete development, removed for periodontal reasons. Labial and incisal surfaces of all teeth were prepared. Molds were obtained to prepare metal (Co-Cr), Zr, and ceramic (IPS Empress II) blocks for use in the study. The compressive strengths of the obtained material infrastructures were examined after thermal cycle processing by performing cementation to the teeth with two different cements. The data obtained were analyzed statistically. The Mann-Whitney U-test was used for comparisons of the groups with two options, and Kruskal-Wallis variance analysis was used to compare more than two groups. P<0.05 were considered statistically significant. RESULTS: While the highest result between samples was 117.86 ± 47.94 N in the dual-cure (Panavia)-ceramic group, the lowest value was observed at 6.53 ± 3.12 N in the self-adhesive (BisCem)-metal group. There was a significant difference between dual-cure (Panavia) and self-adhesive (BisCem) groups. CONCLUSION: In this study, we measured the bond strength; our most durable resistance groups were found to be, in order, Panavia-ceramics >Panavia-metal >Panavia-Zr >self-adhesive-ceramics >self-adhesive-Zr >and self-adhesive-metal.

Asunto(s)

RESUMEN

A laboratory study was conducted to examine the wear of resin composite materials using both a localized and generalized wear simulation model. Twenty specimens each of seven resin composites (Esthet•X HD [HD], Filtek Supreme Ultra [SU], Herculite Ultra [HU], SonicFill [SF], Tetric EvoCeram Bulk Fill [TB], Venus Diamond [VD], and Z100 Restorative [Z]) were subjected to a wear challenge of 400,000 cycles for both localized and generalized wear in a Leinfelder-Suzuki wear simulator (Alabama machine). The materials were placed in custom cylinder-shaped stainless steel fixtures. A stainless steel ball bearing (r=2.387 mm) was used as the antagonist for localized wear, and a stainless steel, cylindrical antagonist with a flat tip was used for generalized wear. A water slurry of polymethylmethacrylate (PMMA) beads was used as the abrasive media. A noncontact profilometer (Proscan 2100) with Proscan software was used to digitize the surface contours of the pretest and posttest specimens. AnSur 3D software was used for wear assessment. For localized testing, maximum facet depth (µm) and volume loss (mm(3)) were used to compare the materials. The mean depth of the facet surface (µm) and volume loss (mm(3)) were used for comparison of the generalized wear specimens. A one-way analysis of variance (ANOVA) and Tukey post hoc test were used for data analysis of volume loss for both localized and generalized wear, maximum facet depth for localized wear, and mean depth of the facet for generalized wear. The results for localized wear simulation were as follows [mean (standard deviation)]: maximum facet depth (µm)--Z, 59.5 (14.7); HU, 99.3 (16.3); SU, 102.8 (13.8); HD, 110.2 (13.3); VD, 114.0 (10.3); TB, 125.5 (12.1); SF, 195.9 (16.9); volume loss (mm(3))--Z, 0.013 (0.002); SU, 0.026 (0.006); HU, 0.043 (0.008); VD, 0.057 (0.009); HD, 0.058 (0.014); TB, 0.061 (0.010); SF, 0.135 (0.024). Generalized wear simulation results were as follows: mean depth of facet (µm)--Z, 9.3 (3.4); SU, 12.8 (3.1); HU, 15.6 (3.2); TB, 19.2 (4.8); HD, 26.8 (6.5); VD, 29.1 (5.5); SF, 35.6 (8.4); volume loss (mm(3))--Z, 0.132 (0.049); SU, 0.0179 (0.042); HU, 0.224 (0.044); TB, 0.274 (0.065); HD, 0.386 (0.101); VD, 0.417 (0.076); SF, 0.505 (0.105). The ANOVA showed a significant difference among materials (p<0.001) for facet depth and volume loss for both localized and generalized wear. The post hoc test revealed differences (p<0.05) in localized and generalized wear values among the seven resin composites examined in this study. The findings provide valuable information regarding the relative wear characteristics of the materials in this study.

Asunto(s)

Asunto(s)

RESUMEN

This study compares the bond strength of resin cement and yttrium-stabilized tetragonal zirconia polycrystalline (Y-TZP) ceramic with different surface conditioning methods. Two hundred presintered Y-TZP ceramic specimens were prepared, sintered (4 × 4 × 4 mm), and randomly assigned to four equal groups as control (C, no conditioning); airborne particle abraded (APA, air abrasion with 11 µm Al2O3); tribochemical silica coating/silane coupling system (TSC, Rocatec, air abrasion with 110 µm Al2O3, 30 µm silica-coated Al2O3 and silane); and laser (L, Er:YAG laser irradiation treated at a power setting of 200 mJ). After specimen preparation, composite resin cylinders were prepared and cemented with resin cements (Clearfil Esthetic, Panavia F 2.0, Rely X-U100, Super Bond C&B, and Multilink Automix) on the ceramic surfaces and kept in an incubator at 37°C for 60 days. All specimens were tested for shear bond strength with a universal testing machine, and fractured surfaces were evaluated by environmental scanning electron microscopy. Statistical analysis was performed using Kruskal-Wallis and Mann-Whitney U-tests (α=0.05). The bond strengths for C and L groups were not significantly different according to adhesive resin cement. APA and TSC resulted in increased bond strength for Panavia F 2.0 and Rely X-U100 resin cements. Additionally, TSC presented higher bond strength with Multilink Automix. Adhesive fracture between the ceramic and resin cement was the most common failure. Complete cohesive fracture at the ceramic or composite cylinders was not observed. Regardless of the adhesive resin cement used, laser treatment did not improve resin bond strength.

Asunto(s)

RESUMEN

OBJECTIVES: The authors investigated the use of ceramic primers combined with self-adhesive resin composite cements on the shear bond strength (SBS) to zirconia and compared them with one conventional resin composite cement. METHODS: The authors divided zirconia substrates (N = 550) into three groups: RelyX Unicem Aplicap self-adhesive universal resin composite cement (3M ESPE, St. Paul, Minn.) (group A) (n = 220); G-CEM Capsule self-adhesive resin composite cement (GC Europe, Leuven, Belgium) (group B) (n = 220); and Panavia 21 with Clearfil Porcelain Bond Activator and Clearfil SE Bond primer (n = 110) (Kuraray Dental, Tokyo) used as a standard comparison (SC). The authors examined the self-adhesive resin composite cements without (0) and with (1) the use of a ceramic primer. They measured SBS initially (37°C for three hours), after water storage (37°C for one, four, nine, 16 or 25 days) and after thermal cycling (5°C and 55°C for 1,500, 6,000, 13,500, 24,000 or 37,500 cycles). The authors analyzed data by using descriptive statistics, the Mann-Whitney test, the Kruskal-Wallis test and a χ(2) test. RESULTS: Application of a ceramic primer did not result in a negative impact on SBS. Specimens in the A1 group (that is, RelyX Unicem Aplicap with ceramic primer) exhibited significantly higher SBS before and after water storage and thermal cycling compared with specimens that were not treated with a primer. The self-adhesive resin composite cements combined with ceramic primer exhibited similar or higher SBS values compared with those in the SC group at each aging duration (that is, water storage and thermal cycling). With respect to G-CEM Capsule, the authors observed a significantly positive effect of the primer after nine and 16 days' water storage and after one and four days' thermal cycling. They observed predominantly adhesive failures. CONCLUSIONS: Ceramic primer in combination with self-adhesive resin composite cement demonstrated a positive effect on SBS to zirconia and should be used for cementation. PRACTICAL IMPLICATIONS: Long-term adhesion to ceramic plays an important role in the longevity of dental restorations. Therefore, the authors recommend that clinicians use a ceramic primer when cementing zirconia restorations.

Asunto(s)

RESUMEN

BACKGROUND: Zirconia was introduced as an alternative to alumina for use in the femoral head. The yttria stabilized zirconia material was improved by adding alumina. We evaluated highly cross-linked polyethylene wear performance of zirconia in total hip arthroplasty. The hypothesis was that alumina stabilized zirconia could decrease highly cross-linked polyethylene wear. METHODS: Highly cross-linked polyethylene wear was measured with a computerized method (PolyWare) in 91 hips. The steady-state wear rates were measured based on the radiographs from the first year postoperatively to the final follow-up and were compared between hips with yttria stabilized zirconia and alumina stabilized zirconia. RESULTS: The steady-state wear rate of highly cross-linked polyethylene against zirconia was 0.02 mm/year at a mean follow-up of 7 years. No significant difference was observed between groups with yttria stabilized zirconia and alumina stabilized zirconia. CONCLUSIONS: Addition of alumina to the zirconia material failed to show further reduction of highly cross-linked polyethylene wear and our hypothesis was not verified.

Asunto(s)

RESUMEN

The purpose of this prospective cohort study was to assess the performance of tooth-supported, long-span, zirconia fixed dental prostheses (FDPs). Thirty FDPs with span lengths from 36 to 46 mm (mean 40·33 mm), with 4-7 units and with connector dimensions ∼9 mm(2) were inserted (19 in the posterior region, 11 including anterior teeth) using glass-ionomer cement. The performance of the FDPs was assessed (aesthetic evaluation, failures, hypersensitivity/tooth vitality, secondary caries, pocket depth, decementation, and chipping) at baseline and after 5 years. Cox regression analysis was performed to identify risk factors. There were 16 failures after 5 years. Framework fracture occurred for two FDPs, four FDPs had to be re-cemented, one abutment tooth had to be treated endodontically, one abutment tooth fractured and cohesive failure of the veneer occurred for eight. Four FDPs had to be replaced, so survival was 82%. The aesthetics were rated as excellent by the patients at baseline and good at the 5-year recall. Cox regression analysis showed that both length [P = 0·05, exp(B) = 1·22] and location [P = 0·019, exp(B) = 4·09] of the FDP were risk factors for failure. Compared with the previously published 2-year results, the incidence of complications increased dramatically. Additionally, it was shown that long-span FDPs in the molar region are at greater risk of failure than FDPs in the anterior region.

Asunto(s)

RESUMEN

OBJECTIVE: To evaluate the shear bond strength (SBS) between alumina-toughened zirconia (ATZ) cores and veneering ceramics, investigate the effect of aging in artificial saliva on SBS and compare it with that of yttria-stabilized tetragonal zirconia polycrystals(Y-TZP). METHODS: Bars of ATZ and Y-TZP were layered with veneering ceramics in accordance to the recommendation of the manufacturer. Half of each group (n = 10) was aged at 134 °C (under 2 bar pressure) in an autoclave for 48 h. Subsequently, all specimens were subjected to shear force in a universal testing machine. The interface and fractured surface of the specimens were evaluated using scanning electron microscopy and X-ray energy dispersive spectroscopy. RESULTS: The initial mean SBS values in MPa±SD were 28.9±8.0 for ATZ and 26.2±7.6 for Y-TZP. After aging, the mean SBS values for ATZ and Y-TZP were 22.9±4.9 MPa and 22.8±6.9 MPa, respectively. Neither the differences between the SBS values of the ATZ and Y-TZP groups nor the influence of aging on all groups were statistically significant. CONCLUSIONS: The SBS between the ATZ core and the veneering ceramics was not affected by aging. The SBS of ATZ to veneering ceramics was not significantly different compared with that of Y-TZP.

Asunto(s)

RESUMEN

Highly cross-linked polyethylene (HXLPE) was developed to reduce wear of articular bearing surface in total hip arthroplasty patients. Several studies have shown reduced wear of HXLPE compared with conventional polyethylene; however, these studies had used HXLPE in combination with a Co-Cr metal head. The purpose of this study was to compare the 5-year in vivo wear of HXLPE with that of conventional PE using a zirconia femoral head. Forty-five hips with a Trilogy HXLPE (Zimmer, Warsaw, Ind) were matched and compared with a control group of 20 conventional Trilogy PE hips. The 2-dimensional linear wear rate was significantly less in the HXLPE group between 1 and 5 years postoperation (P < .001). The results show that HXLPE reduces short-term polyethylene wear against not only a Co-Cr head but also a zirconia head.

Asunto(s)

Asunto(s)

RESUMEN

This paper describes the determination of trace Zr and Hf in the sample using carbon powder and titanium oxide as the buffer by Atomic Emission Spectrometry (AES). Titanium was selected for the internal standard line. Sample separation and chemical treatment were not required. The sample was directly loaded into an ordinary electrode. The method is simple, rapid and accurate. The conditions for the determination, and the factors of influence have been studied. A new method has been developed for the determination of zirconium and hafnium. The analytical lines of Zr and Hf were 327.3 and 286.6 nm respectively. The internal standard line of Ti was 308.8 nm. The linear range of the determination of Zr and Hf was 0-0.50% and 0-0.25% respectively. The detection limit of Zr and Hf was 0.0010% and 0.010% respectively. The range of the recovery of zirconium and hafnium was 96.67%-105.0%. The results for these elements in standard sample are in agreement with certified values with a precision of 3.61% RSD for Zr (n = 9), and 4.82% RSD for Hf (n = 9). The method has been applied to the determination of Zr and Hf with satisfactory results.

Asunto(s)

RESUMEN

The strength degrading effects of sharp-contact damage are examined for Y-TZP ceramic plates bonded to a plastic substrate. Contacts are made with Vickers and Berkovich diamond indenters at low loads (0.1 N to 100 N) in the ceramic lower surfaces prior to bonding to the substrates. The indentations remain in the subthreshold region, that is, without visible corner radial cracks, over the lower region (< 10 N) of the load range. A concentrated load is then applied sinusoidally to the ceramic upper surface, with the loading axis centered on the subsurface indentation flaw, thereby subjecting the flaw to cyclic tension. Relative to polished surfaces, the indentations diminish the single-cycle strength by an amount that increases with increasing indentation load. The critical number of cycles required to cause failure from the indentation flaws is then measured at specified maximum lower surface tensile stresses. At each indentation load, the strength of the ceramic plates diminishes with increased cycling. The scale of degradation is compared with that from previous studies on Y-TZP surfaces containing larger-scale surface damage: sandblast damage, as used in dental crown preparation; and blunt-contact trauma from a spherical indenter at 3000 N. These other damage modes are shown to be equivalent in their strength-degrading capacity to diamond pyramid indentations in the microscale load range 0.1 N to 1 N, attesting to the highly deleterious nature of sharp particulate contacts. The mechanism of fatigue is considered in terms of microcrack evolution within the indentation damage zone.

Asunto(s)

RESUMEN

An application of the standard addition method to stripping voltammetry of solid materials immobilized in inert electrodes is described. The method allows the determination of the mass fraction of a depositable metal M in a material on addition of known amounts of a standard material containing M to a mixture of that material and a reference compound of a second depositable metal, R. After a reductive deposition step, voltammograms recorded for those modified electrodes immersed in a suitable electrolyte produce stripping peaks for the oxidation of the deposits of M and R. If no intermetallic effects appear the quotients between the peak areas and the peak currents for the stripping oxidation of M and R vary linearly with the mass ratio of the added standard and the reference compound, thus providing an electrochemical method for determining the amount of M in the sample. The method has been applied to the determination of Zr in minerals, ceramic frits, and pigments, using ZnO as reference material and ZrO(2) as the standard.

Asunto(s)

RESUMEN

OBJECTIVES: Prosthetic posts made of zirconia ceramics are beneficial because of their esthetic advantages. The mechanical reliability of ceramic posts is limited because of the strength level and the large scatter in strength of ceramic materials. The hypothesis of this study is that the failure of ceramic posts in vivo, which occur on low-quality posts because of critical microscopic defects can be excluded using the so-called proof test technology. METHODS: The theory of the proof test technology is explained in detail in this study. In the experimental part 22 ceramic posts were tested at different proof load levels using a stepwise rotating four-point bending proof test device. RESULTS: The experimental failures deviated from the theoretical failure probabilities by 0.24-12.69%. The deviation would be further reduced in a serial proof test using batches with a greater quantity of posts. The test eliminated those posts, which contained microscopic defects above a critical size of clinical relevance. SIGNIFICANCE: The technology can help to reduce clinical failures of non-vital abutment teeth with ceramic posts, which are caused by critical microscopic defects of the ceramic material as a result of the industrial manufacturing process.

Asunto(s)