RESUMEN

OBJECTIVES: The study focused on the ability to predict the need and size of femoral and tibial augmentation using standard two-dimensional (2D) templates and models created with three-dimensional (3D) printing in surgical planning. PATIENTS AND METHODS: This observational cohort study included 28 consecutive patients (22 females, 6 males; mean age: 71±7.3 years; range, 54 to 82 years) with periprosthetic joint infection recruited between March 2021 and September 2023 undergoing revision total knee arthroplasty revision (TKA). Standard planning was made using calibrated X-ray images. The 3D planning started with computed tomography scans to generate a 3D template of the distal femur and proximal tibia. The model was exported to a 3D printer to produce a patient-specific phantom. The surgery was then simulated on the 3D phantom using revision knee arthroplasty instrumentation to evaluate the appropriate augmentation to use until a correct alignment was obtained. RESULTS: Three-dimensional planning predicted the need for femoral and tibial augments in 22 (78.6%) cases at both the tibial and femoral components, while 2D planning correctly predicted the need for augmentation in 17 (60.7%) for the tibial side and 18 (64.3%) for the femoral side. The Cohen's kappa demonstrated a significant agreement between the 3D planning for the femoral metal block and the intraoperative requirement (kappa=0.553), whereas 2D planning showed only nonsignificant poor agreement (kappa=0.083). In contrast, the agreement between 2D or 3D preoperative planning for tibial augment and the intraoperative requirement was nonsignificant (kappa=0.130 and kappa=0.158, respectively). On the femoral side, 2D planning showed only a fair nonsignificant correlation (r=0.35, p=0.069), whereas 3D planning exhibited substantial agreement with the actual thickness of the implanted augment (r=0.65, p<0.001). On the tibial side, 3D and 2D planning showed substantial agreement with the actual size of implanted augments (3D planning, r=0.73, p<0.001; 2D planning, r=0.69, p<0.001). CONCLUSION: Prediction based on 3D computed tomography segmentation showed significant agreement with the intraoperative need for augmentations in revision TKA. The results suggest that planning with 3D printed models represents a stronger aid in this kind of surgery rather than standard 2D planning, providing greater accuracy in the prediction of the required augmentation in revision TKA.

Asunto(s)

RESUMEN

BACKGROUND: Accurate estimation of implant size before surgery is crucial in preparing for total knee arthroplasty. However, this task is time-consuming and labor-intensive. To alleviate this burden on surgeons, we developed a reliable artificial intelligence (AI) model to predict implant size. METHODS: We enrolled 714 patients with knee osteoarthritis who underwent total knee arthroplasty from March 2010 to February 2014. All surgeries were performed by the same surgeon using implants from the same manufacturer. We collected 1412 knee anteroposterior (AP) and lateral view x-ray images and retrospectively investigated the implant size. We trained the AI model using both AP and lateral images without any clinical or demographic information and performed data augmentation to resolve issues of uneven distribution and insufficient data. Using data augmentation techniques, we generated 500 images for each size of the femur and tibia, which were then used to train the model. Using data augmentation techniques, we generated 500 images for each size of the femur and tibia, which were then used to train the model. We used ResNet-101 and optimized the model with the aim of minimizing the cross-entropy loss function using both the Stochastic Gradient Descent (SGD) and Adam optimizer. RESULTS: The SGD optimizer achieved the best performance in internal validation. The model showed micro F1-score 0.91 for femur and 0.87 for tibia. For predicting within ± one size, micro F1-score was 0.99 for femur and 0.98 for tibia. CONCLUSION: We developed a deep learning model with high predictive power for implant size using only simple x-ray images. This could help surgeons reduce the time and labor required for preoperative preparation in total knee arthroplasty. While similar studies have been conducted, our work is unique in its use of simple x-ray images without any other data, like demographic features, to achieve a model with strong predictive power.

Asunto(s)

RESUMEN

BACKGROUND: The adoption of robot-assisted total knee arthroplasty (TKA) aims to enhance the precision of implant positioning and limb alignment. Despite its benefits, the adoption of such technology is often accompanied by an initial learning curve, which may result in increased operative times. This study sought to determine the learning curve for the ROSA (Robotic Surgical Assistant) Knee System (Zimmer Biomet) in performing TKA and to evaluate the accuracy of the system in executing bone cuts and angles as planned. The hypothesis of this study was that cumulative experience with this robotic system would lead to reduced operative times. Additionally, the ROSA system demonstrated reliability in terms of the accuracy and reproducibility of bone cuts. METHODS: In this retrospective observational study, we examined 110 medical records from 95 patients who underwent ROSA-assisted TKA performed by three surgeons. We employed the cumulative summation methodology to assess the learning curves related to operative time. Furthermore, we evaluated the accuracy of the ROSA Knee System in performing TKA by comparing planned versus validated values for femoral and tibial bone cuts and angles. RESULTS: The learning curve for the ROSA Knee System spanned 14, 14, and 6 cases for the respective surgeons, with operative times decreasing by 22 min upon reaching proficiency (70.8 vs. 48.9 min; p < 0.001). Significant discrepancies were observed between the average planned and validated cuts and angles for femoral bone cuts (0.4 degree ± 2.4 for femoral flexion, 0.1 degree ± 0.6 for femoral coronal alignment, 0.3 mm ± 1.2 for distal medial femoral resection, 1.4 mm ± 8.8 for distal lateral femoral resection) and hip-knee-ankle axis alignment (0.3 degree ± 1.9 )(p < 0.05) but not for tibial bone cuts. Differences between planned and validated measurements during the learning and proficiency phases were nonsignificant across all parameters, except for the femoral flexion angle (0.42 degree ± 0.8 vs. 0.44 degree ± 2.7) (p = 0.49). CONCLUSION: The ROSA Knee System can be integrated into surgical workflows after a modest learning curve of 6 to 14 cases. The system demonstrated high accuracy and reproducibility, particularly for tibial bone cuts. Acknowledging the learning curve associated with new robot-assisted TKA technologies is vital for their effective implementation.

Asunto(s)

RESUMEN

BACKGROUND: Gap tension is an important factor influencing the clinical outcomes of total knee arthroplasty (TKA). Traditional mechanical alignment (MA) places importance on neutral alignment and often requires additional soft tissue releases, which may be related to patient dissatisfaction. Conversely, the functional alignment requires less soft tissue release to achieve gap balance. Conventional gap tension instruments present several shortcomings in practice. The aim of this study is to introduce a new gap balancing technique with FA using the modified spacer-based gap tool and the MAKO robotic arm system. METHODS: A total of 22 consecutive patients underwent primary TKA using the MAKO robotic arm system. The gap tension was assessed and adjusted with the modified spacer-based gap tool during the operation. Patient satisfaction was evaluated post-operatively with a 5-point Likert scale. Clinical outcomes including lower limb alignment, Knee Society Score (KSS) and Western Ontario and McMaster Universities Arthritis Index (WOMAC) were recorded before surgery, 3 months and 1 year after surgery. RESULTS: The range of motion (ROM) was significantly increased (p < 0.001) and no patients presented flexion contracture after the surgery. KSS and WOMAC score were significantly improved at 3 months and 1 year follow-up (p < 0.001 for all). During the surgery, the adjusted tibial cut showed more varus than planned and the adjusted femoral cut presented more external rotation than planned (p < 0.05 for both). The final hip-knee-ankle angle (HKA) was also more varus than planned (p < 0.05). CONCLUSIONS: This kind of spacer-based gap balancing technique accompanied with the MAKO robotic arm system could promise controlled lower limb alignment and improved functional outcomes after TKA.

Asunto(s)

RESUMEN

BACKGROUND: Unicompartmental knee replacement (UKR) is an effective treatment for end-stage medial compartment osteoarthritis, but there can be problems with fixation. The cementless UKR was introduced to address this issue. It is unknown how its functional outcomes compare with those of the cemented version on a national scale. We performed a matched comparison of the clinical and functional outcomes of cementless and cemented UKRs. METHODS: Using the National Joint Registry for England, Wales, Northern Ireland and the Isle of Man (NJR), 14,764 Oxford UKRs with linked data regarding patient-reported outcomes were identified. A total of 6,906 UKRs (3,453 cemented and 3,453 cementless) were propensity score matched on the basis of patient, surgical, and implant factors. RESULTS: The 10-year cumulative implant survival rate was 93.0% (95% confidence interval [CI], 90.0% to 95.1%) for cementless UKRs and 91.3% (95% CI, 89.0% to 93.0%) for cemented UKRs. The cementless UKR group had a significantly lower revision risk (hazard ratio [HR], 0.74; p = 0.02). Subgroup analyses showed a stronger effect size (HR, 0.66) among UKRs performed by high-caseload surgeons (i.e., surgeons performing ≥30 UKRs/year). In the overall cohort, the postoperative Oxford Knee Score (OKS) in the cementless group (mean and standard deviation, 39.1 ± 8.7) was significantly higher (p = 0.001) than that in the cemented group (38.5 ± 8.6). The cementless group gained a mean of 17.6 ± 9.3 points in the OKS postoperatively and the cemented group gained 16.5 ± 9.6 points, with a difference of 1.1 points between the groups (p < 0.001). The difference in OKS points gained postoperatively was highest among UKRs performed by high-caseload surgeons, with the cementless group gaining 1.8 points more (p < 0.001) than the cemented group. CONCLUSIONS: The cementless UKR demonstrated better 10-year implant survival and postoperative functional outcomes than the cemented UKR. The difference was largest among UKRs performed by high-caseload surgeons, with the cementless fixation group having an HR for revision of 0.66 and an approximately 2-point greater improvement in the OKS compared with the cemented fixation group. LEVEL OF EVIDENCE: Prognostic Level III . See Instructions for Authors for a complete description of levels of evidence.

Asunto(s)

RESUMEN

Over the past few decades, instrumentation and techniques for total knee arthroplasty have evolved from conventional manual tools to a wide range of technologies, including calibrated guides for accurate bone cuts and alignment, smart tools, dynamic intraoperative sensors for soft tissue balancing, patient-specific guides, computer navigation, and robotics. This review is intended to provide an overview of the latest advancements in total knee arthroplasty technology, address potential challenges and solutions related to the application of these technologies, and explore their limitations.

Asunto(s)

RESUMEN

BACKGROUND: Approximately 5% of primary total knee arthroplasty patients require revision within 10 years, often due to distal component loosening. Application of a thin layer of PMMA cement as precoating on the tibial component aims to prevent aseptic loosening. This study investigates the impact of precoating and fat contamination on tibial baseplate stability. METHODS: Two groups of NexGen® stemmed tibial implants (size 4) were studied: Option implants (N = 12) and PMMA Precoat implants (N = 12). Each implant design was divided into two subgroups, (N = 6), with one subgroup featuring bone marrow fat at the implant-cement interface and the other without contamination. In a mechanical testing machine, the implants underwent uniaxial loading for 20,000 cycles, while recording vertical micromotion and migration of the tibial baseplates. Subsequently, a push-out test assessed fixation strength at the cement interfaces. Results were compared using non-parametric statistics and presented as median and min-to-max ranges. RESULTS: Option implants exhibited higher micromotion in dry conditions compared to precoated implants (p = 0.03). Under contamination, both designs demonstrated similar micromotion values. Fixation strength did not significantly differ between designs under dry, uncontaminated conditions (p > 0.99). However, under contaminated conditions, the failure load for the non-coated Option implant was nearly half that of the uncontaminated counterparts (3517 N, 2603-4367 N vs 7531 N, 5163-9000 N; p = 0.002). Precoat implants displayed less susceptibility to fat contamination (p = 0.30). CONCLUSION: NexGen® implant PMMA precoating might reduce the risk of aseptic loosening and revision surgery in case of eventual bone-marrow fat contamination.

Asunto(s)

RESUMEN

PURPOSE: Resecting the posterior cruciate ligament (PCL) increases posterior laxity and increases the flexion gap more than the extension gap in the native (i.e. healthy) knee. These two effects could lead to significant anterior displacement of the medial femoral condyle in kneeling following total knee arthroplasty even when using a tibial insert with a high degree of medial conformity. Using an insert with ball-in-socket medial conformity and a flat lateral articular surface, the primary purpose was to determine whether the medial femoral condyle remained stable with and without PCL retention during kneeling. METHODS: Two groups of patients were studied, one with PCL retention (22 patients) and the other with PCL resection (25 patients), while kneeling at 90º flexion. Following 3D model-to-2D image registration, A-P displacements of both femoral condyles were determined relative to the dwell point of the medial socket. RESULTS: With PCL resection versus PCL retention, the medial femoral condyle was 5.1 ± 3.7 mm versus 0.8 ± 2.1 mm anterior of the dwell point (p < 0.0001). Patient-reported function scores were comparable (p ≥ 0.1610) despite a significantly shorter follow-up of 7.8 ± 0.9 months with PCL retention than 19.6 ± 4.9 months with PCL resection (p < 0.0001). Range of motion was 126 ± 8° versus 122 ± 6° with and without PCL retention, respectively (p = 0.057). CONCLUSION: Surgeons that use a highly conforming tibial insert design can stabilize the medial femoral condyle during kneeling by retaining the PCL. In patients with PCL resection, the 9 mm high anterior lip of the insert with ball-in-socket medial conformity was insufficient to prevent significant anterior displacement of the medial femoral condyle when weight-bearing on the anterior tibia.

Asunto(s)

RESUMEN

¼ The demographic profile of candidates for total knee arthroplasty (TKA) is shifting toward younger and more active individuals.¼ While cemented fixation remains the gold standard in TKA, the interest is growing in exploring cementless fixation as a potentially more durable alternative.¼ Advances in manufacturing technologies are enhancing the prospects for superior long-term biological fixation.¼ Current research indicates that intermediate to long-term outcomes of modern cementless TKA designs are comparable with traditional cemented designs.¼ The selection of appropriate patients is critical to the success of cementless fixation techniques in TKA.¼ There is a need for high-quality research to better understand the potential differences and relative benefits of cemented vs. cementless TKA systems.

Asunto(s)

RESUMEN

BACKGROUND: The first generation of titanium nitride (TiN) coatings for orthopaedic implants was clinically introduced in the 1990s because of their promising biocompatibility, wear resistance, and corrosion resistance. This study evaluated the in vivo performance of early TiN-coated knee and hip implants, focusing on the bearing surfaces and mechanisms of in vivo damage. METHODS: There were 13 TiN-coated implants (5 knee and 8 hip) retrieved from 8 patients as part of a multi-institutional implant retrieval program. The average implantation time was 4.25 years for knees and 17.5 years for hips. Implant revisions occurred for various reasons, including polyethylene wear, loosening, pain, infection, and instability. Components were examined using a semiquantitative scoring method, and surface roughness measurements were performed using white-light interferometry. Surface morphology, chemistry, and particle characterization were also assessed by scanning electron microscopy. RESULTS: For hips, mild corrosion was found on femoral head tapers, along with severe scratching on certain femoral heads. Knee implants exhibited low burnishing and scratching for both mechanisms. Roughness measurements (Sa) were 37.3 nm (interquartile range = 22.0 to 62.4) for hips and 85.3 nm (interquartile range = 66.3 to 110) for knees. The observed scratch depth in both hip and knee implants due to third-body particles ranged from 0.3 to 1.3 µm. The coating coverage remained intact in the majority of the implants, with 2 cases of small, localized cohesive chipping and substrate exposure. CONCLUSIONS: The results of this study confirm the potential in vivo durability of early TiN coatings and will be useful in benchmarking wear tests for modern TiN-coated orthopaedic implants.

Asunto(s)

RESUMEN

OBJECTIVE: The practice of simultaneous bilateral unicompartmental knee arthroplasty (SBUKA) remains a topic of debate, particularly in patients with obesity. Thus, the purpose of this study was to assess the impact of body mass index (BMI) on the 30-day complication rate and the survival rate of the implant following SBUKA. METHODS: We retrospectively examined the clinical records of 245 patients (490 knees) who underwent SBUKA at the Affiliated Hospital of Qingdao University and the Third Hospital of Hebei Medical University between January 2010 and December 2020. Patients were categorised based on their BMI at the time of surgery into four groups: normal weight (BMI 18.5 to 22.9 kg/m2), overweight (BMI 23.0 to 24.9 kg/m2), obese (BMI 25.0 to 29.9 kg/m2), and severely obese (BMI ≥30 kg/m2). Variables such as length of hospital stay, duration of surgery, and costs of hospitalisation were compared across all groups. Additionally, we recorded the 30-day postoperative complication rate and the time from surgery to any required revision. The Kaplan-Meier survival analysis was employed to evaluate and compare the implant survival rates. RESULTS: The follow-up period for the 245 patients ranged from 39 to 114 months, with an average of 77.05±18.71 months. The incidence of complications within 30 days post-surgery did not significantly differ across the groups (χ2 = 1.102, p = 0.777). The implant survival rates from the lowest to the highest BMI groups were 97.14%, 93.9%, 94.44%, and 96.43%, respectively. Both the rate of implant revision (χ2 =1.612, p = 0.657) and the survival curves of the implants (p = 0.639) showed no statistically significant differences among the groups. CONCLUSIONS: BMI did not influence the 30-day complication rate nor the survival rate of implants following SBUKA, suggesting that SBUKA should not be contraindicated based on BMI alone.

Asunto(s)

RESUMEN

BACKGROUND: The aim of this retrospective study was to evaluate the effectiveness and accuracy of the AIKNEE system in preoperative planning and intraoperative alignment for total knee arthroplasty (TKA). METHODS: A total of 64 patients were planned preoperatively by the AIKNEE system, including the measurement of mechanical femorotibial angle (mFTA), lateral distal femoral angle (LDFA), and medial proximal tibial angle (MPTA) using three-dimensional reconstructed images. Intraoperatively, the actual prosthesis size and alignment were compared to the planned parameters. Postoperative outcomes, including pain levels, range of motion (ROM), and Knee Scoring System (KSS) scores, were assessed after surgery. Statistical analyses were performed to evaluate the correlation between alignment deviations and postoperative function. RESULTS: The AIKNEE system accurately predicted the prosthesis size in thirty-one of femoral cases (48%) and forty-seven of tibial cases (73%). Deviations of mFTA, LDFA, and MPTA from the target value were within 3° in 88%, 92%, and 95% of cases, respectively. A significant improvement was observed in postoperative pain, ROM, and KSS scores (p < 0.001). Correlation analysis revealed that greater deviations in mFTA and LDFA were associated with increased pain (p = 0.004, 0.047) and lower KSS scores (p = 0.027). CONCLUSION: The AIKNEE system demonstrated promising results in predicting prosthesis size and achieved alignment within the desired range in a majority of cases. Postoperative outcomes, including pain levels and functional improvement, were favorable.

Asunto(s)

RESUMEN

Background and Objectives: As a treatment modality for advanced knee osteoarthritis, total knee arthroplasty is well established and has been performed on many patients over time. To improve surgical outcomes, fixed-bearing implant insertion with robotic-assisted TKA has been introduced; however, the insertion of mobile-bearing (MB) implants with the same method is challenging. The aim of this study was to compare the short-term postoperative follow-up outcomes of MB implant insertion using a robotic-assisted TKA system and conventional TKA. Materials and Methods: We investigated functional improvement in the knees of 60 patients who underwent the insertion of MB implants using either robotic-assisted TKA or conventional TKA. Isokinetic muscular function, range of motion, the Western Ontario and McMaster Universities Osteoarthritis Index score, visual analog scale (VAS) score, and Knee Society Score (KSS) were measured 6 months after surgery. The statistical analysis of outcome measurements was performed using the Mann-Whitney U test and the Wilcoxon signed-rank test. Results: Some isokinetic muscular functions, as well as Knee Society Scores (pain and function) and VAS scores, were significantly higher in patients who underwent MB insertion with robotic-assisted TKA than in those who underwent conventional TKA. Conclusions: When an MB implant is inserted using a robotic-assisted TKA system, a better surgical outcome can be expected.

Asunto(s)

Asunto(s)

RESUMEN

PURPOSE: The aim of this study is to determine the validity of consumer grade step counter devices during the early recovery period after knee replacement surgery. METHODS: Twenty-three participants wore a Fitbit Charge or Apple Watch Series 4 smart watch and performed a walking test along a 50-metre hallway. There were 9 males and 14 females included in the study with an average age of 68.5 years and BMI of 32. Each patient wore both the Fitbit Charge and Apple Watch while completing the walking test and an observer counted the ground truth value using a thumb-push tally counter. This test was repeated pre-operatively with no gait aid, immediately post operatively with a walker, at 6 weeks follow up with a cane and at 6 months with no gait aid. Bland-Altman plots were performed for all walking tests to compare the agreement between measurement techniques. RESULTS: Mean overall agreement of step count for pre-operative and at 6 months for subjects walking without gait aids was excellent for both the Apple Watch vs. actual and Fitbit vs. actual with bias values ranging from - 0.87 to 1.36 with limits of agreement (LOA) ranging between - 10.82 and 15.91. While using a walker both devices showed extremely little agreement with the actual step count with bias values between 22.5 and 24.37 with LOA between 11.7 and 33.3. At 6 weeks post-op while using a cane, both the Apple Watch and Fitbit devices had a range of bias values between - 2.8 and 5.73 with LOA between - 13.51 and 24.97. CONCLUSIONS: These devices show poor validity in the early post operative setting, especially with the use of gait aids, and therefore results should be interpreted with caution.

Asunto(s)

RESUMEN

INTRODUCTION: Interest in unicompartmental knee arthroplasty (UKA) has recently grown. Mobile bearing UKA, in which the bearing is not fixed but rather perfectly conforms with femoral and tibial components and moves completely passively between the femoral and tibial implant, has now been used for approximately half a century. AREAS COVERED: Alongside the recognized advantages of UKA, the mobile-bearing variant benefits from an extremely low rate of polyethylene wear and tolerable minor malalignment. Revision rates for UKA have been reported to exceed those of total knee arthroplasty, but long-term survival rates and outcomes from mobile-bearing UKA have been found to be satisfactory. In addition to the lateral osteoarthritis and loosening, which are main complications of UKA, bearing dislocation is a specific complication of mobile bearing UKA. Fractures and valgus subsidence are more prevalent than in the cementless UKA. While these continue to be features to be addressed, they have been partially solved. EXPERT OPINION: Given the manifold benefits of UKA, its application could be extended to a larger patient population. Successful outcomes rely on careful patient selection and the surgeon's extensive familiarity with the procedure. Looking ahead, the incorporation of robotic surgery, already a feature of some fixed-bearing UKAs, might shape the future trajectory of mobile-bearing UKA.

Asunto(s)

RESUMEN

BACKGROUND: This study investigates the association between additional distal femoral resection and improved flexion contracture in total knee arthroplasty (TKA) with a robot-assisted system. Flexion contracture is a common issue in patients with knee osteoarthritis, which causes postoperative complications and functional limitations. This study aims to evaluate the effectiveness of additional bone resection in flexion contracture correction and knee extension angle improvement after the actual surgical steps. METHODS: The study included 11 patients who underwent posterior-stabilized (PS)-type TKA with a robot-assisted system. The surgical technique consisted of precise bone resection and range of motion evaluation using a navigation system. A precut technique was used to facilitate posterior access and remove osteophytes that cause the contracture. The amount of additional distal femoral resection was determined based on the thickness of the insert trial required for achieving full extension. RESULTS: The flexion contracture correction angle and the amount of additional distal femoral resection demonstrated a linear relationship. An average of 2.0° with the standard error (SE) of 0.6° improvement in flexion contracture was observed per 1.0 mm of additional bone resection. The postoperative evaluation demonstrated a significant improvement in knee extension angle, thereby reducing the contracture degree. CONCLUSION: This study was the first to perform the additional distal femoral resection on the living knee, which closely replicates the actual surgical steps. The current study revealed that an additional 1.0 mm of distal femoral resection in PS-type TKA improves knee extension angle by 2.0° (SE 0.6°) within an additional resection range of 1.0 mm to 3.3 mm.

Asunto(s)

RESUMEN

Robotic-assisted total knee arthroplasty (TKA) has been developed to improve functional outcomes after TKA by increasing surgical precision of bone cuts and soft tissue balancing, thereby reducing outliers. The DePuy Synthes VELYS robotic-assisted solution (VRAS) is one of the latest entrants in the robotic TKA market. Currently, there is limited evidence investigating early patient and economic outcomes associated with the use of VRAS. The Premier Healthcare Database was analyzed to identify patients undergoing manual TKA with any implant system compared with a cohort of robotic-assisted TKAs using VRAS between September 1, 2021 and February 28, 2023. The primary outcome was all-cause and knee-related all-setting revisits within 90-day post-TKA. Secondary outcomes included number of inpatient revisits (readmission), operating room time, discharge status, and hospital costs. Baseline covariate differences between the two cohorts were balanced using fine stratification methodology and analyzed using generalized linear models. The cohorts included 866 VRAS and 128,643 manual TKAs that had 90-day follow-up data. The rates of both all-cause and knee-related all-setting follow-up visits (revisits) were significantly lower in the VRAS TKA cohort compared with the manual TKA cohort (13.86 vs. 17.19%; mean difference [MD]: -3.34 [95% confidence interval: -5.65 to -1.03] and 2.66 vs. 4.81%; MD: -2.15 [-3.23 to -1.08], respectively, p-value < 0.01) at 90-day follow-up. The incidence of knee-related inpatient readmission was also significantly lower (53%) for VRAS compared with manual TKA. There was no significant difference between total cost of care at 90-day follow-up between VRAS and manual TKA cases. On average, the operating room time was higher for VRAS compared with manual TKA (138 vs. 134 minutes). In addition, the discharge status and revision rates were similar between the cohorts. The use of VRAS for TKA is associated with lower follow-up visits and knee-related readmission rates in the first 90-day postoperatively. The total hospital cost was similar for both VRAS and manual TKA cohort while not accounting for the purchase of the robot.

Asunto(s)

RESUMEN

CASE: A patient underwent revision of a total knee replacement to a cementless rotating-hinge prosthesis. The femoral component became loose, but due to the patient's frailty and cognitive decline, revision was not performed. Subsequently, the yoke failed, dissociating the femoral and tibial components, necessitating a single-stage revision. CONCLUSION: This case underlines the need for robust fixation of components of rotating-hinge knee replacements to avoid mechanical failures. It contributes valuable insights to the limited literature on yoke failure in total knee arthroplasty, emphasizing the importance of implant design, patient selection, and surgical technique to prevent such complications.

Asunto(s)

RESUMEN

BACKGROUND: Surgical treatment for hinge failure in mega-prosthesis continues to be a challenge. This study introduces a new method for treating hinge failure by using a unilateral prosthesis and hinge revision. CASE PRESENTATION: We here present two patients who underwent mega-prosthesis reconstruction after resection of osteosarcoma in the distal femur. To address the issue of knee hyperextension after mega-prosthesis reconstruction, one patient underwent three revision surgeries, two surgeries were performed using the original hinge, and one surgery involved a newly designed hinge. To resolve the problem of dislocation, one patient underwent three revisions, with the first two revisions not involving hinge replacement and the third revision involving a newly designed hinge. Two replacements of unilateral prosthesis and hinge renovations were successful. CONCLUSIONS: Unilateral prosthesis and newly designed hinge device revision are effective in treating the failure of old-fashioned mega-prosthesis hinges.

Asunto(s)