RESUMEN

OBJECTIVE: To propose a screw algorithm and investigate the anatomical feasibilities and clinical outcomes of five distinct fixation methods for C2-3 fused vertebra with high-ridding vertebral arteries (VA) (HRVA) when the C2 pedicle screw placement is unfeasible. METHODS: Thirty surgical patients with congenital C2-3 fusion, HRVA, and atlantoaxial dislocation (AAD) were included. We designed a algorithm for alternative screw implantation into C2-3 fused vertebrae, including C2 pedicle screw with in-out-in (passing VA groove) technique (in-out-in screw), subfacetal screw, translaminar screw, lateral mass screw, C3 pedicle screw. VA diameter and position, C2 and C3 pedicles, superior facets, fused lamina, and fused lateral mass dimensions were evaluated for screw implantation indication. Implant failure, reduction loss, implant placement accuracy were investigated by computed tomography. RESULTS: A total of 5 VAs were identified as distant VAs; a total of 2 VAs were categorized as occlusive VAs. Sufficient dimension of lateral mass and lamina provided the broadest indications for screw implantation, while the distant or occlusive VA provided the most limited indications for in-out-in screw. The indications of five alternative methods ranged from narrowest to widest as follows: in-out-in screw, C3 pedicle screw, subfacetal screw, translaminar screw, lateral mass screw. The translaminar screws and the lateral mass screws increased the probability of implant failure. All patients who received in-out-in screws, C3 pedicle screws, and subfacetal screws achieved fusion. The accuracy ranged from lowest to highest as follows: C3 pedicle screw, lateral mass screw, in-out-in screw, subfacetal screw, translaminar screw. No translaminar screws deviated. CONCLUSIONS: The algorithm proved to be a valuable tool for screw selection in cases of C2-3 fused vertebrae with HRVAs. The subfacetal screw, boasting broad indications, a high fusion rate, and exceptional accuracy, stood as the primary preferred alternative.

Asunto(s)

RESUMEN

CASE: Odontoid fractures with atlantoaxial dislocations are rare injuries. We report a case of a 41-year-old man with a Type 2 odontoid fracture with locket facet and posterolateral dislocation. He underwent single-stage C1-C4 posterior fixation and fusion, and at 2-year follow-up, he is symptom-free without any residual pain. Follow-up radiograph and CT scan show healed odontoid fracture with posterior fusion. CONCLUSION: This case highlights successful management of a complex odontoid fracture by a single-stage posterior surgery. Closed reduction is usually unsuccessful, and open reduction using posterior approach is preferable.

Asunto(s)

RESUMEN

BACKGROUND: Congenital craniovertebral deformity, including basilar invagination (BI) and atlantoaxial instability (AAI), are often associated with three-dimensional (3D) deformity, such as C1-2 rotational deformity, craniocervical kyphosis, C1 lateral inclination, among other abnormalities. Effective management of these conditions requires the restoration of the 3D alignment to achieve optimal reduction. Recently, 3D printing technology has emerged as a valuable tool in spine surgery, offering the significant advantage of allowing surgeons to customize the prosthesis design. This innovation provides an ideal solution for precise 3D reduction in the treatment of craniovertebral deformities. OBJECTIVE: This study aims to describe our approach to individualized computer-simulated reduction and the design of C1-2 intra-articular 3D printed porous titanium alloy cages for the quantitative correction of craniovertebral junction deformities. METHODS: A retrospective analysis was conducted on patients with craniovertebral deformities treated at our institution using individualized 3D-printed porous titanium alloy cages. Preoperative CT data were used to construct models for 3D realignment simulations. Cage designs were tailored to the simulated joint morphology following computer-assisted realignment. Preoperative and postoperative parameters were statistically analyzed. RESULTS: Fourteen patients were included in the study, with a total of 28 3D-printed porous titanium alloy cages implanted. There were no cases of C2 nerve root resection or vertebral artery injury. All patients experienced symptom relief and stable implant fixation achieved in all cases. No implant-related complications were reported. CONCLUSION: The use of individualized computer-simulated reduction and the design of C1-2 intra-articular 3D printed porous titanium alloy cage facilitates precise 3D realignment in patients with craniovertebral deformities, demonstrating effectiveness in symptom relief and stability.

Asunto(s)

RESUMEN

BACKGROUND: The clinical diagnosis of atlantoaxial joint subluxation (AJS) in traditional Chinese medicine (TCM) is characterized by an unequal distance between the lateral mass of the atlas and the odontoid process on imaging, resulting in neck pain accompanied by symptoms such as dizziness, headache, and limited cervical mobility. In Shanghai, Shi cervical rotational manipulation (SCRM) is a commonly employed TCM manual therapy for treating this condition. Nevertheless, there is a lack of evidence-based medical information regarding the clinical efficacy and safety of this technique. OBJECTIVE: The principal aim of this study is to evaluate the efficacy and safety of SCRM in patients diagnosed with AJS. METHODS: This study is a prospective randomized controlled clinical trial that will be conducted at a single center and that has a follow-up period of 24 weeks. A total of 96 patients diagnosed with AJS will be recruited from outpatient and inpatient clinics at Shanghai Baoshan Hospital of Integrated Traditional Chinese and Western Medicine. These patients will be randomly assigned to either the experimental group (SCRM) or the comparison group (basic cervical manipulation [BCM]). Treatment sessions consisting of SCRM or BCM will be administered twice a week for a duration of 4 weeks. Clinical monitoring indicators include the presence or absence of clinical symptoms as recorded on a symptom recording form, cervical imaging examination findings using cervical computed tomography, degree of neck pain measured by a visual analog scale (VAS), cervical range of motion assessed through cervical mobility measurement, degree of vertigo evaluated using the Vertigo Symptoms Scale-Chinese Version (VSS-C), and adverse events that may occur during the follow-up period. The time points for data collection and follow-up are baseline and postintervention (weeks 4, 8, 12, 16, 20, and 24). RESULTS: This paper presents an overview of the reasoning and structure of a prospective randomized controlled trial with the objective of investigating the clinical efficacy and safety of SCRM in patients with AJS by assessing improvements in clinical symptoms, neck pain severity, and vertigo severity and evaluating changes in cervical imaging findings. Recruitment was started in March 2023. By the end of May 2024, 76 patients were included in this project. The last follow-up data are predicted to be collected by the end of February 2025. CONCLUSIONS: This investigation will yield dependable evidence regarding the efficacy and safety of SCRM in patients with AJS. TRIAL REGISTRATION: Chinese Clinical Trial Registry ChiCTR2300068510; https://www.chictr.org.cn/showprojEN.html?proj=186883. INTERNATIONAL REGISTERED REPORT IDENTIFIER (IRRID): DERR1-10.2196/57865.

Asunto(s)

RESUMEN

Grisel's syndrome is a non-traumatic atlantoaxial (C1-C2) subluxation and one of the causes of torticollis in children. The subluxation occurs in the context of an infection in the ENT ("Ear Nose and Throat") region or following surgery. Diagnosis is based on clinical examination and radiological assessment. Treatment is typically medical and conservative, with surgical interventions reserved for recurrences and late presentations. We discuss here two cases of C1-C2 subluxation. The first case involves a 10-year-old child with subluxation following a rhinopharyngitis. This presentation is the classical manifestation of Grisel's syndrome. Prompt management led to correction of the subluxation using medical treatment and a soft Philadelphia collar. The second case involves a 34-year-old adult who developed posterior headaches after sphenoidotomy surgery. Grisel's syndrome is less common in adults, leading to clinical challenges and delayed diagnosis (> 1 month). Reduction combined with a halo vest treatment failed, and the patient required cervical arthrodesis.

Le syndrome de Grisel est une subluxation atlanto-axoïdienne (C1-C2) non traumatique et l'une des causes de torticolis chez l'enfant. La subluxation survient dans le cadre d'une infection de la sphère ORL ou à la suite d'une chirurgie. Le diagnostic est basé sur la clinique et l'examen radiologique. Le traitement est le plus souvent médical et conservateur. Les prises en charge chirurgicales sont limitées aux récidives et aux présentations tardives.Nous discutons ici deux cas de subluxation C1-C2. La première chez un enfant de 10 ans faisait suite à une rhinopharyngite. Cette présentation correspond à la présentation typique du syndrome de Grisel. Une prise en charge rapide a permis une correction de cette subluxation à l'aide d'un traitement médical et d'une minerve souple de type Philadelphia. Le second cas concerne une adulte de 34 ans qui a présenté des céphalées postérieures à la suite d'une chirurgie de sphénoïdotomie. Le syndrome Grisel est moins fréquent chez l'adulte, ce qui a engendré une errance clinique et un diagnostic retardé (> 1 mois). La réduction associée à un traitement par haloveste a échoué et la patiente a nécessité une arthrodèse cervicale.

Asunto(s)

Asunto(s)

RESUMEN

Objective: To compare the effectiveness of robot-assisted and traditional freehand screw placement in the treatment of atlantoaxial dislocation. Methods: The clinical data of 55 patients with atlantoaxial dislocation who met the selection criteria between January 2021 and January 2024 were retrospectively analyzed. According to different screw placement methods, they were divided into the traditional group (using the traditional freedhand screw placement, 31 cases) and the robot group (using the Mazor X robot-assisted screw placement, 24 cases). There was no significant difference in gender, age, body mass index, etiology, and preoperative visual analogue scale (VAS) score, cervical spine Japanese Orthopaedic Association (JOA) score between the two groups ( P>0.05). The operation time, intraoperative blood loss, operation cost, and intraoperative complications were recorded and compared between the two groups. The VAS score and cervical spine JOA score were used to evaluate the improvement of pain and cervical spinal cord function before operation and at 1 month after operation. CT examination was performed at 3 days after operation, and the accuracy of screw placement was evaluated according to Neo grading criteria. Results: All the 55 patients successfully completed the operation. The operation time, intraoperative blood loss, and operation cost in the robot group were significantly higher than those in the traditional group ( P<0.05). A total of 220 C 1 and C 2 pedicle screws were inserted in the two groups, and 94 were inserted in the robot group, with an accuracy rate of 95.7%, among them, 2 were inserted by traditional freehand screw placement due to bleeding caused by intraoperative slip. And 126 pedicle screws were inserted in the traditional group, with an accuracy rate of 87.3%, which was significantly lower than that in the robot group ( P<0.05). There were 1 case of venous plexus injury in the robot group and 3 cases in the traditional group, which improved after pressure hemostasis treatment. No other intraoperative complication such as vertebral artery injury or spinal cord injury occurred in both groups. All patients were followed up 4-16 months with an average of 6.6 months, and there was no significant difference in the follow-up time between the two groups ( P>0.05). Postoperative neck pain significantly relieved in both groups, and neurological symptoms relieved to varying degrees. The VAS score and cervicle spine JOA score of both groups significantly improved at 1 month after operation when compared with preoperative scores ( P<0.05), and there was no significant difference in the score change between the two groups ( P>0.05). Conclusion: In the treatment of atlantoaxial dislocation, the accuracy of robot-assisted screw placement is superior to the traditional freedhand screw placement.

Asunto(s)

RESUMEN

Objective: To investigate the effectiveness of computer-assisted and robot-assisted atlantoaxial pedicle screw implantation for the treatment of reversible atlantoaxial dislocation (AAD). Methods: The clinical data of 42 patients with reversible AAD admitted between January 2020 and June 2023 and met the selection criteria were retrospectively analyzed, of whom 23 patients were treated with computer-assisted surgery (computer group) and 19 patients were treated with Mazor X spinal robot-assisted surgery (robot group). There was no significant difference in gender, age, T value of bone mineral density, body mass index, etiology, and preoperative Japanese Orthopaedic Association (JOA) score, Neck Dysfunction Index (NDI) between the two groups ( P>0.05). The operation time, screw implantation time, intraoperative blood loss, hand and wrist radiation exposure, and complications were recorded and compared between the two groups. Gertzbein classification was used to evaluate the accuracy of screw implantation. JOA score and NDI were used to evaluate the function before operation, at 3 days after operation, and at last follow-up. At last follow-up, the status of screws and bone fusion were observed by neck three-dimensional CT. Results: The operation time and hand and wrist radiation exposure of the computer group were significantly longer than those of the robot group ( P<0.05), and there was no significant difference in the screw implantation time and intraoperative blood loss between the two groups ( P>0.05). All patients were followed up 11-24 months, with an average of 19.6 months. There was no significant difference in the follow-up time between the two groups ( P>0.05). There was no significant difference in the accuracy of screw implantation between the two groups ( P>0.05). Except for 1 case of incision infection in the computer group, which improved after antibiotic treatment, there was no complication such as nerve and vertebral artery injury, screw loosening, or breakage in the two groups. The JOA score and NDI significantly improved in both groups at 3 days after operation and at last follow-up ( P<0.05) compared to those before operation, but there was no significant difference between the two groups ( P>0.05). At last follow-up, 21 patients (91.3%) in the computer group and 18 patients (94.7%) in the robot group achieved satisfactory atlantoaxial fusion, and there was no significant difference in the fusion rate between the two groups ( P>0.05). Conclusion: Computer-assisted or robot-assisted atlantoaxial pedicle screw implantation is safe and effective, and robotic navigation shortens operation time and reduces radiation exposure.

Asunto(s)

RESUMEN

INTRODUCTION: Vertigo is the most common clinical complaint, misdiagnosed patients are not rare, so it is very important to exclude and identify vertigo. For vertigo caused by multiple causes, including cervical vertigo with atlantoaxial rotation fixation combined with benign paroxysmal positional vertigo (BPPV), tuina can correct joint misalignment. The reduction technique will return the fallen otolith to the correct position. The use of massage and reduction can improve clinical symptoms and improve quality of life and may be a simple, safe, and effective treatment strategy for this disease. PATIENT CONCERNS: We report on a patient with both cervical vertigo due to atlantoaxial rotational fixation and BPPV, including his imaging examination, clinical manifestations, and treatment methods. DIAGNOSIS: Cervical vertigo (atlantoaxial rotatory fixation) and BPPV. INTERVENTION: Tuina combined with atlantoaxial directional inverted reduction technique and reduction manipulation. OUTCOMES: The patient's vertigo symptoms improved significantly, nystagmus disappeared, cervical occipital pain, nausea, head distension, and other symptoms disappeared, and cervical motion rotation reached 60°. CONCLUSION: This study proved the effectiveness of massage combined with a reduction in the treatment of cervical vertigo and BPPV, as well as the importance of vertigo diagnosis and differential diagnosis, and provided a new treatment idea for the future diagnosis and treatment of vertigo caused by a variety of causes.

Asunto(s)

RESUMEN

PURPOSE: To evaluate the efficacy of calvarial graft (CG) in craniovertebral fusion procedures in children at a single single center. METHODS: Paediatric patients in whom CG had been used as the sole construct, or to augment a semi-rigid construct were identified from a prospective operative database. Age, underlying diagnosis and clinical presentation were obtained from review of the electronic patient record. The primary outcome was bony fusion confirmed on CT. Additional outcome measures were donor site morbidity and need for further surgery. RESULTS: From 82 paediatric CVJ procedures, CG was used in 15 patients with a mean age of 4.1 (± 3.52) years. Aetiology comprised skeletal dysplasia (n = 12), congenital anomaly of segmentation (n = 1) and cervical trauma (n = 2). Myelopathy was the most common clinical finding (9/15), followed by cervical pain (3/15). The indications for surgery comprised atlanto-axial subluxation (8/15), basilar invagination with compression (2/15), and cervicomedullary compression without instability but deemed at risk of instability following decompression (4/15). CG was used in three scenarios: (i) CG + wire only (n = 10); (ii) CG + semirigid instrumentation (n = 3); (iii) CG to augment rigid instrumented fixation (n = 2). In 13 patients a Halo-body Jacket was used peri-operatively. At a mean time of 4.4 months following surgery, 80% of cases had radiological evidence of fusion. CONCLUSION: Full thickness calvarial bone graft is readily available, has good structural integrity and is associated with minimal donor site morbidity. CG should be considered for use as a sole construct, or to augment semi-rigid constructs when instrumented fixation is precluded.

Asunto(s)

Asunto(s)

RESUMEN

OBJECTIVE: To investigate (1) lateral atlantoaxial articulation (LAA) morphology in patients with basilar invagination (BI) with atlantoaxial dislocation (AAD) and healthy individuals and its relationship with the severity of dislocation and (2) the effect of the LAA morphology on reduction degree (RD) after surgery. METHODS: In this retrospective propensity score matching case-control study, imaging and baseline data of 62 patients with BI and AAD from 2011 to 2022 were collected. Six hundred thirteen  participants without occipitocervical junctional deformity served as controls. Logistic regression and receiver operating characteristic (ROC) curve were used for analysis. RESULTS: The age, BMI and sex did not differ significantly between the two groups after propensity score matching. Sagittal slope angle (SSA) and coronal slope angle (CSA) was lower and greater, respectively, in the patient group than in the control group. A negative SSA value usually indicates anteverted LAA. Regression analysis revealed a significant negative correlation between SSA and severity of dislocation. However, no relationship was found between CSA and the severity of dislocation. The multivariate logistic regression analysis revealed that minimum-SSA emerged as an independent predictor of satisfactory reduction (RD ≥ 90%). The ROC curve demonstrated an area under the curve of 0.844, with a cut-off value set at -40.2. CONCLUSION: SSA in patients group was significantly smaller and more asymmetric than that in the control group. Dislocation severity was related to SSA but not to CSA. Minimum-SSA can be used as a predictor of horizontal RD after surgery.

Asunto(s)

Asunto(s)

Asunto(s)

RESUMEN

BACKGROUND AND OBJECTIVES: Patients with basilar invagination (BI) can be treated with several surgical options, ranging from simple posterior decompression to circumferential decompression and fusion. Here, we aimed at examining the indications and outcomes associated with these surgical strategies to devise a staged algorithm for managing BI. METHODS: We conducted a retrospective cohort study in 2 neurosurgical centers and included patients with a BI, as defined by a position of the dens tip at least 5 mm above the Chamberlain line. Other craniovertebral junction anomalies, such as atlas assimilation, platybasia, and Chiari malformations, were documented. C1-C2 stability was assessed with a dynamic computed tomography scan. RESULTS: We included 30 patients with BI with a mean follow-up of 56 months (min = 12, max = 166). Posterior decompression and fusion (n = 8) was only performed in cases of obvious atlanto-axial instability (eg, increased atlanto-dental interval or hypermobility on flexion/extension), while anterior decompression (transoral or transnasal) was reserved to patients with lower cranial nerves deficits (eg, swallowing dysfunction) and irreducible anterior compression (n = 9). Patients with posterior signs (eg, Valsalva headaches) or myelopathy but without C1-C2 instability nor anterior signs were managed with an isolated foramen magnum decompression, with or without duraplasty (n = 13). Complications were more frequent for combined procedures, including neurological deterioriation (n = 4) and tracheostomy (n = 2), but reinterventions were more likely in patients undergoing posterior decompression alone (n = 3). CONCLUSION: Patient selection is key to determine the appropriate surgical strategy for BI: In our experience, combined approaches are only needed for patients with irreducible and symptomatic anterior compression, while fusion should be restricted to patient with obvious signs of atlanto-axial instability. Other BI patients can be managed by foramen magnum decompression alone to minimize surgical morbidity.

Asunto(s)

RESUMEN

Genetic diseases with craniofacial malformations can be associated with anomalies of the craniocervical joint (CCJ). The functions of the CCJ are thus impaired, as mobility may be either limited by abnormal bone fusion causing headaches, or exaggerated in the case of hypermobility, which may cause irreparable damage to the spinal cord. Restoring the balance between mobility and stability requires surgical correction in children. The anatomy and biomechanics of the CCJ are quite unique, yet have been overlooked in the past decades. Pediatric evidence is so scarce, that investigating the adult CCJ is our best shot to disentangle the form-function relationships of this anatomical region. The motivation of the present study was to understand the morphological and functional basis of motion in the CCJ, in the hope to find morphological features accessible from medical imaging able to predict mobility. To do so, we have quantified the in-vitro kinematics of the CCJ in nine cadaveric asymptomatic adults, and estimated a wide range of mobility variables covering the complexity of spinal motion. We compared these variables with the shape of the occipital, the atlas and the axis, obtained using a dense geometric morphometric approach. Morphological joint congruence was also quantified. Our results suggest a strong relationship between bone shape and motion, with the overall geometry predicting best the primary movements, and the joint facets predicting best the secondary movements. We propose a functional hypothesis stating that the musculoligamental system determines movements of great amplitude, while the shape and congruence of joint facets determine the secondary and coupled movements, especially by varying the geometry of bone stops and the way ligaments are tensioned. We believe this work will provide valuable insights in understanding the biomechanics of the CCJ. Furthermore, it should help surgeons treating CCJ anomalies by enabling them to translate objectives of functional and clinical outcome into clear objectives of morphological outcome.

Asunto(s)

RESUMEN

OBJECTIVE: To explore dose-effect relationship of biomechanical parameters in treating atlantoaxial joint disorder by slimming manipulation. METHODS: From October 2022 to May 2023, 18 patients with atlantoaxial joint disorders were treated, including 10 males and 8 females;aged from 24 to 27 years old with an average of (25.50±1.10) years old;CT of cervical vertebra showed 16 patients with right side distortion and 2 patients with left side distortion. The mechanical parameters of treatment of atlantoaxial joint disorder by tendon relaxation manipulation were measured by wearing massage manipulation gloves. The magnitude, frequency and mechanical curve of force during tendon relaxation and starting force, pulling force, pulling time and mechanical curve during rehabilitation were quantified, the differences between the affected and contralateral manipulations were compared. RESULTS: The maximum force and frequency of Fengchi(GB20) on the affected side were (19.82±2.02) N and (116.83±14.49) times/min, and opposite side were (13.87±2.19) N and (188.89±16.03) times/min, respectively. There were statistically difference in the maximum force and frequency of both sides (P<0.05). The maximum force and frequency of Quepen (ST12) on the affected side were (14.44±3.27) N and (139.06±28.47) times/min, and those on the opposite side were (9.41±1.38) N and (142.50±28.47) times/min. There was difference in maximum force on both sides (P<0.05). The starting force, turning force and turning time of the affected side were (14.16±5.98) N, (11.56±6.63) N, (0.14±0.03) S, and the contralateral side were (8.94±3.39) N, (8.30±4.64) N, (0.18±0.04) S, respectively. The difference of starting force, turning force and turning time on both sides were statistically significant (P<0.05). CONCLUSION: By applying a light relaxation force on the affected side, the mechanical balance between cervical vertebrae could be restored, and recovery trend of atlantoaxial joint disorder could be strengthened. On this basis, the atlantoaxial odontoid process could be reversed by applying a light rotation force, which reflects the characteristics of high safety of the manipulation.

Asunto(s)

RESUMEN

OBJECTIVE: Autologous iliac bone is commonly used as a bone graft material to achieve solid fusion in craniocervical junction (CVJ) surgery. However, the developing iliac bone of children is less than ideal as a bone graft material. The matured rib bone of children presents a potential substitute material for iliac bone. The aim of this study was to evaluate the efficacy of autologous rib grafts for craniocervical junction surgery in children. METHODS: The outcomes of 10 children with abnormalities of the craniocervical junction who underwent craniocervical junction surgery between January 2020 and December 2022 were retrospectively reviewed. All patients underwent posterior fusion and internal fixation surgery with autologous rib grafts. Pre- and post-operative images were obtained and clinical follow-ups were conducted to evaluate neurological function, pain level, donor site complications, and bone fusion rates. RESULTS: All surgeries were successful. During the 8- to 24-month follow-up period, all patients achieved satisfactory clinical results. Computed tomography at 3-6 months confirmed successful bone fusion and regeneration of the rib defect in all patients with no neurological or donor site complications. CONCLUSION: Autologous rib bone is a safe and effective material for bone grafting in craniocervical junction fusion surgery for children that can reduce the risks of donor site complications and increase the amount of bone graft, thereby achieving a higher bone fusion rate.

Asunto(s)

RESUMEN

In forensic commingled contexts, when the disarticulation occurs uniquely at the atlantoaxial joint, the correct match of atlas and axis may lead to the desirable assembly of the entire body. Notwithstanding the importance of this joint in such scenarios, no study has so far explored three-dimensional (3D) methodologies to match these two adjoining bones. In the present study, we investigated the potential of re-associating atlas and axis through 3D-3D superimposition by testing their articular surfaces congruency in terms of point-to-point distance (Root Mean Square, RMS). We analysed vertebrae either from the same individual (match) and from different individuals (mismatch). The RMS distance values were assessed for both groups (matches and mismatches) and a threshold value was determined to discriminate matches with a sensitivity of 100%. The atlas and the corresponding axis from 41 documented skeletons (18 males and 23 females), in addition to unpaired elements (the atlas or the axis) from 5 individuals, were superimposed, resulting in 41 matches and 1851 mismatches (joining and non-joining elements). No sex-related significant differences were found in matches and mismatches (p = 0.270 and p = 0.210, respectively), allowing to pool together the two sexes in each group. RMS values ranged between 0.41 to 0.77 mm for matches and between 0.37 and 2.18 mm for mismatches. Significant differences were found comparing the two groups (p < 0.001) and the highest RMS of matches (0.77 mm) was used as the discriminative value that provided a sensitivity of 100% and a specificity of 41%. In conclusion, the 3D-3D superimposition of the atlanto-axial articular facets cannot be considered as a re-association method per se, but rather as a screening one. However, further research on the validation of the 3D approach and on its application to other joints might provide clues to the complex topic of the reassociation of crucial adjoining bones.

Asunto(s)

RESUMEN

STUDY DESIGN: This is a narrative review and case report. OBJECTIVE: To review the literature concerning Grisel syndrome physiopathology, diagnosis, and surgical reports, highlighting the decision-making for treatment and its timing. We describe the role of intraoperative US in the management of 2 cases of GS of the adult. SUMMARY OF BACKGROUND DATA: GS is a rare nontraumatic post inflammatory C1-C2 rotatory instability usually affecting children; adult cases are even rarer, and the role of surgical treatment is not well defined. CASE DISCUSSION: Case 1: A 72-year-old man with upper cervical pain and no neurological deficit; radiologic examination revealed C1-C2 spondylitis and epidural abscess. After antibiotic therapy, the patient developed cervical instability. Hence, surgical decompression and C1-C2 stabilization were performed. Case 2: An 82-year-old woman with progressive right hemiparesis. CT and MRI showed C1-C2 spondylitis with retro-odontoid epidural abscess. Atlanto-axial rotatory instability was evident so surgery was achieved. In both cases, intraoperative US was useful for localizing retro-odontoid abscess and allowing safe puncture of the collection, leading to its remarkable radiologic reduction. CONCLUSION: GS in adults remains a challenge: Patients should be closely monitored concerning neurological and inflammatory status. We describe the successful use of intraoperative US for draining retro-odontoid abscess for the first time, with satisfactory postoperative outcome without need of circumferential approach.

Asunto(s)