RESUMEN

Sulfurous acid was used for pretreatment of sugar beet pulp (SBP) in order to achieve high efficiency of both extraction of carbohydrates and subsequent enzymatic hydrolysis of the remaining solids. The main advantage of sulfurous acid usage as pretreatment agent is the possibility of its regeneration. Application of sulfurous acid as hydrolyzing agent in relatively low concentrations (0.6-1.0 %) during a short period of time (10-20 min) and low solid to liquid ratio (1:3, 1:6) allowed effective extraction of carbohydrates from SBP and provided positive effect on subsequent enzymatic hydrolysis. The highest obtained concentration of reducing substances (RS) in hydrolysates was 8.5 %; up to 33.6 % of all carbohydrates present in SBP could be extracted. The major obtained monosaccharides were arabinose and glucose (9.4 and 7.3 g/l, respectively). Pretreatment of SBP with sulfurous acid increased 4.6 times the yield of glucose during subsequent enzymatic hydrolysis of remaining solids with cellulase cocktail, as compared to the untreated SBP. Total yield of glucose during SBP pretreatment and subsequent enzymatic hydrolysis amounted to 89.4 % of the theoretical yield. The approach can be applied directly to the wet SBP. Hydrolysis of sugar beet pulp with sulfurous acid is recommended for obtaining of individual monosaccharides, as well as nutritional media.

Asunto(s)

RESUMEN

Anti-immunoglobulin activity of immunoglobulins, rarely receiving attention in literature, occupies a special place among the special bacterial substances released by bacteria exocellularly. We studied the effects of some pollutants (phenol, diethanolamine, nitric and hydrochloric acids) on this pathogenicity factor. Phenol and hydrochloric acid added to tap water caused statistically significant changes in anti-immunoglobulin activity of Klebsiella strains.

Asunto(s)

RESUMEN

A single oral dose of two 3-thia (3-thiadicarboxylic and tetradecylthioacetic acids) and of 4-thia (tetradecylthiopropionic acid) fatty acids were administered to normolipidemic rats and their effects on lipid metabolism over a 24 hr period were studied. All three thia fatty acids could be detected in plasma 2 hr after treatment. Tetradecylthioacetic and tetradecylthiopropionic acids were detected in different hepatic lipid fractions but were incorporated mainly into hepatic phospholipids. Two hours after administration hepatic mitochondrial beta-oxidation and the total liver level of long-chain fatty acyl-CoA increased with a concomitant decrease in saturated fatty acids, total hepatic malonyl-CoA and plasma triacylglycerol levels in the 3-thia fatty acid groups. Tetradecylthiopropionic acid administration caused a decrease in mitochondrial beta-oxidation and an increase in plasma triacylglycerol at 24 hr. The activities of key lipogenic enzymes were unaffected in all treatment groups. Plasma cholesterol level was reduced only at 8 hr in 3-thiadicarboxylic acid treated rats although 3-hydroxy-3-methylglutaryl-CoA (HMG-CoA) reductase was suppressed already at 2, 4, 8 and 12 hr. The results show that thia fatty acids are rapidly absorbed and are systemically available after oral administration but the 3-thia fatty acids reached systemic circulation more slowly and less completely than the 4-thia fatty acid. Very low levels of the thia fatty acids are detected in plasma 24 hr after a single administration. They are incorporated into all hepatic lipid classes, especially phospholipids. Rapid incorporation of a non beta-oxidizable thia fatty acid into hepatic lipids may cause a diversion of other fatty acids from glycerolipid biosynthesis to mitochondrial beta-oxidation. Stimulation of mitochondrial beta-oxidation and suppression of HMG-CoA reductase are primary events, occurring within hours, after 3-thia fatty acid administration. The hypotriglyceridemic effect of the 3-thia fatty acids observed at 2-4 hr is independent of the activities of key lipogenic and triacylglycerol synthesising enzymes.

Asunto(s)

RESUMEN

The applicability of the hard-and-soft principle of acids and bases in predicting metal adsorption characteristics in a biological context was investigated for metabolism-independent uptake of the metal ions Sr2+, Mn2+, Zn2+, Cu2+, Cd2+, and Tl+ by Saccharomyces cerevisiae. Metal adsorption increased with external metal concentration (5 to 50 microM), although some saturation of uptake of the harder ions examined, Sr2+, Mn2+, and Zn2+, was evident at the higher metal concentrations. Cation displacement experiments indicated that, with the exception of Tl+, relative covalent bonding (H+ displacement) of the metals was greater at low metal concentrations, while weaker electrostatic interactions (Mg2+ plus Ca2+ displacement) became increasingly important at higher concentrations. These results were correlated with curved Scatchard and reciprocal Langmuir plots of metal uptake data. Saturation of covalent binding sites was most marked for the hard metals, and consequently, although no relationship between metal hardness and ionic/covalent bonding ratios was evident at 10 microM metal, at 50 microM the ratio was generally higher for harder metals. Increasing inhibition of metal uptake at increasing external anion concentrations was partially attributed to the formation of metal-anion complexes. Inhibitory effects of the hard anion SO42(-) were most marked for uptake of the hard metals Sr2+ and Mn2+, whereas greater relative effects on adsorption of the softer cations Cu2+ and Cd2+ were correlated with complexation by the soft anion S2O32(-). Inhibition of uptake of the borderline metal Zn2+ by SO42(-) and that by S2O32(-) were approximately equal.(ABSTRACT TRUNCATED AT 250 WORDS)

Asunto(s)

RESUMEN

Sulfur isotope composition patterns for sulfide evolved from cultures supplemented with 1 mM Na2SO3, suggested that an inducible dissimilatory type SO3(2-) reduction pathway, as previously found in C. pasteurianum, probably exists in many clostridial species. Data are presented for five additional species which include pathogens and nonpathogens.

Asunto(s)

Asunto(s)

Asunto(s)

Asunto(s)

Asunto(s)

Asunto(s)

Asunto(s)