RESUMEN

This study evaluated the effect of solutions containing aminomethacrylate copolymer (AA) and sodium fluoride (F; 225 ppm F-) or fluoride plus stannous chloride (FSn; 225 ppm F-, 800 ppm Sn2+) against enamel and dentin erosion/abrasion. Solutions F, FSn, AA, F+AA, FSn+AA, and deionized water as negative control were tested. Bovine enamel and dentin specimens (n = 13/solution/substrate) underwent a set of erosion-abrasion cycles (0.3% citric acid [5 min, 4×/day], human saliva [1 h, 4×/day], brushing [15 s, 2×/day], and treatments [2 min, 2×/day]) for each of five days. Initial enamel erosion was evaluated using Knoop microhardness after the first and second acid challenge on day 1, and surface loss with profilometry after day 5. KOH-soluble fluoride was assessed. Data were analyzed with ANOVA/Tukey tests. The combination of fluoride and AA resulted in higher protection against enamel erosion, whereas this was not the case for the combination of AA and FSn. All treatments protected against enamel and dentin loss. The lowest surface loss values were observed with F+AA and FSn+AA. The polymer did not significantly influence the KOH-soluble fluoride formation on enamel/dentin specimens. The aminomethacrylate copolymer effectively enhanced the efficacy of sodium fluoride against initial erosion and improved the control of enamel and dentin wear of F and FSn solutions.

Asunto(s)

Esmalte Dental , Dentina , Fluoruro de Sodio , Abrasión de los Dientes , Erosión de los Dientes , Erosión de los Dientes/prevención & control , Bovinos , Esmalte Dental/efectos de los fármacos , Dentina/efectos de los fármacos , Animales , Fluoruro de Sodio/uso terapéutico , Fluoruro de Sodio/farmacología , Humanos , Abrasión de los Dientes/prevención & control , Abrasión de los Dientes/etiología , Saliva/efectos de los fármacos , Saliva/química , Fluoruros de Estaño/uso terapéutico , Cariostáticos/farmacología , Cariostáticos/uso terapéutico , Dureza , Fluoruros/uso terapéutico , Ácido Cítrico/farmacología , Ácido Cítrico/efectos adversos , Cepillado Dental , Compuestos de Potasio/uso terapéutico , Hidróxidos , Metacrilatos , Compuestos de Estaño

RESUMEN

Aiming to contribute to the current knowledge on the impact of reaction conditions on the chemical structure and target properties of starch citrates, in the current contribution different corn starch citrates were prepared by manipulation of reaction time, temperature and citric acid concentration. Modified starches were characterized in terms of chemical structure, morphology, crystallinity, swelling power and resistant starch content. For the first time, total substitution, crosslinking and monosubstitution degrees were quantitatively determined; and the relationship among final chemical structure, reaction conditions and target starch citrates properties was comprehensively analyzed. Products with total substitution values in the range of 0.075-0.24, crosslinking degrees in the 0.005-0.11 interval, and monosubstitution extents within the 0.05-0.12 range, were produced. By proper selection of reaction conditions products with almost 100 % of resistant starch were obtained. Results evidenced that starch citrates properties (mainly swelling power and RS content) depend on both chemical structure and the reaction conditions employed. Actually, the reaction temperature set (120 °C or 150 °C) proved to play a determinant role in the final products properties as evidenced from starch citrates with similar chemical structure and substantially different swelling and digestibility properties.

Asunto(s)

Ácido Cítrico , Almidón , Ácido Cítrico/química , Almidón/química , Temperatura , Zea mays/química , Almidón Resistente

RESUMEN

This study aimed to evaluate the effect of chemical gasification and HEPES as alternative systems to pH control during in vitro maturation on bovine oocytes competence. Groups of 20 bovine cumulus oocytes complexes (COCs) were randomly distributed and cultured for 24 h in one of the following experimental groups: (i) chemical reaction (ChRG) system: CO2 generated from sodium bicarbonate and citric acid reaction (ii) culture media TCM-HEPES (HEPES-G); and (iii) control group (CNTG) in conventional incubator. After in vitro maturation (IVM), the COCs were in vitro fertilized (IVF), and in vitro cultivated (IVC) in a conventional incubator. We evaluated oocyte nuclear maturation, cleavage and blastocyst rates, in addition to the relative mRNA expression of BAX, BMP-15, AREG and EREG genes in oocytes and cumulus cells. The proportion of oocytes in metaphase II was higher in CNTG and ChRG (77.57% and 77.06%) than in the HEPES-G (65.32%; p = .0408 and .0492, respectively). The blastocyst production was similar between CNTG and ChRG (26.20% and 28.47%; p = .4232) and lower (p = .001) in the HEPES-G (18.71%). The relative mRNA expression of BAX gene in cumulus cells was significantly higher (p = .0190) in the HEPES-G compared to the CNTG. Additionally, the relative mRNA expression of BMP-15 gene was lower (p = .03) in oocytes from HEPES-G compared to the CNTG. In conclusion, inadequate atmosphere control has a detrimental effect on oocyte maturation. Yet, the use of chemical gasification can be an efficient alternative to bovine COCs cultivation.

Asunto(s)

Fertilización In Vitro , Técnicas de Maduración In Vitro de los Oocitos , Oocitos , Animales , Bovinos , Técnicas de Maduración In Vitro de los Oocitos/veterinaria , Técnicas de Maduración In Vitro de los Oocitos/métodos , Oocitos/efectos de los fármacos , Fertilización In Vitro/veterinaria , Femenino , Medios de Cultivo , Blastocisto/efectos de los fármacos , Células del Cúmulo/efectos de los fármacos , Dióxido de Carbono/farmacología , Bicarbonato de Sodio/farmacología , Ácido Cítrico/farmacología , Técnicas de Cultivo de Embriones/veterinaria

RESUMEN

This study evaluated the effect of fluoride varnishes containing micrometric or nanosized sodium trimetaphosphate (TMP) on dentin erosive wear in vitro. Bovine root dentin blocks were selected by surface hardness and randomly divided into five experimental groups/varnishes (n = 20/group): placebo, 5% sodium fluoride (NaF); 5% NaF+5% micrometric TMP; 5% NaF+2.5% nanosized TMP; and 5% NaF+5% nanosized TMP. Half of the surface of all blocks received a single application of the assigned varnish, with subsequent immersion in artificial saliva for 6 h. Varnishes were then removed and the blocks were immersed in citric acid (90 s, 4×/day, 5 days). After each erosive cycle, ten blocks of each group were immersed in a placebo dentifrice for 15 s (ERO), while the other ten blocks were subjected to abrasion by brushing (ERO+ABR). Dentin erosive wear was assessed by profilometry. Data were submitted to 2-way ANOVA and to the Holm-Sidak test (p<0.05). Dentin erosive wear was significantly higher for ERO+ABR than for ERO for all varnishes. TMP-containing varnishes promoted superior effects against dentin erosive wear compared with 5% NaF alone; and 5% nanosized TMP led to the lowest wear among all varnishes. In conclusion, the addition of TMP to conventional fluoride varnish (i.e., varnish containing only NaF) enhanced its protective effects against bovine root dentin erosion and erosion+abrasion. Additionally, the use of 5% nanosized TMP led to superior effects in comparison to 5% micrometric TMP, both for erosion and erosion+abrasion in vitro.

Asunto(s)

Dentina , Fluoruros Tópicos , Ensayo de Materiales , Polifosfatos , Fluoruro de Sodio , Propiedades de Superficie , Erosión de los Dientes , Bovinos , Animales , Polifosfatos/farmacología , Polifosfatos/química , Dentina/efectos de los fármacos , Fluoruro de Sodio/farmacología , Erosión de los Dientes/prevención & control , Fluoruros Tópicos/farmacología , Análisis de Varianza , Factores de Tiempo , Propiedades de Superficie/efectos de los fármacos , Distribución Aleatoria , Reproducibilidad de los Resultados , Nanopartículas/química , Abrasión de los Dientes/prevención & control , Saliva Artificial/química , Ácido Cítrico/farmacología , Valores de Referencia , Pruebas de Dureza

RESUMEN

To evaluate the effect of acidic challenge on erosion depth and topographic characteristics of different materials used as occlusal sealants. Two hundred specimens of five sealant materials (Fuji IX, Ketac Molar, Fuji II, Equia and Clinpro) and forty bovine teeth enamel samples (control) were prepared and exposed to acidic challenge. The specimens were immersed in four different solutions (orange juice, coke drink, citric acid or distilled water) under mildly shaken conditions for 3 days. The erosion depth profiles were measured using a profilometer and Scanning Electron Microscope (SEM). Two-way ANOVA with Tukey post-hoc test was performed to evaluate the interactions. Sealant material and acidic challenge had significant effects on erosion depth. Among the materials, Fuji II presented the highest mean of erosion depth after immersion in orange juice, coke drink, and citric acid. All materials groups presented higher erosion depth values after immersion in the citric acid solution, except Clinpro. Bovine enamel presented higher erosion depth values compared to all materials when submitted to erosive challenge. Sealant materials submitted to the acidic challenge presented different degrees of erosion and topographic modification; however, they are less susceptible to erosion than bovine teeth enamel.

Asunto(s)

Ácido Cítrico , Esmalte Dental , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Selladores de Fosas y Fisuras , Propiedades de Superficie , Erosión de los Dientes , Bovinos , Animales , Erosión de los Dientes/prevención & control , Erosión de los Dientes/inducido químicamente , Esmalte Dental/efectos de los fármacos , Selladores de Fosas y Fisuras/química , Análisis de Varianza , Factores de Tiempo , Propiedades de Superficie/efectos de los fármacos , Cementos de Ionómero Vítreo/química , Cementos de Ionómero Vítreo/uso terapéutico , Reproducibilidad de los Resultados , Bebidas Gaseosas/efectos adversos , Valores de Referencia , Concentración de Iones de Hidrógeno , Resinas Compuestas/química

RESUMEN

It has been assumed that exercise intensity variation throughout a cycling time trial (TT) occurs in alignment of various metabolic changes to prevent premature task failure. However, this assumption is based on target metabolite responses, which limits our understanding of the complex interconnection of metabolic responses during exercise. The current study characterized the metabolomic profile, an untargeted metabolic analysis, after specific phases of a cycling 4-km TT. Eleven male cyclists performed three separated TTs in a crossover counterbalanced design, which were interrupted at the end of the fast-start (FS, 600 ± 205 m), even-pace (EP, 3600 ± 190 m), or end-spurt (ES, 4000 m) phases. Blood samples were taken before any exercise and 5 min after exercise cessation, and the metabolomic profile characterization was performed using Nuclear Magnetic Resonance metabolomics. Power output (PO) was also continually recorded. There were higher PO values during the FS and ES compared to the EP (all p < 0.05), which were accompanied by distinct metabolomic profiles. FS showed high metabolite expression in TCA cycle and its related pathways (e.g., glutamate, citric acid, and valine metabolism); whereas, the EP elicited changes associated with antioxidant effects and oxygen delivery adjustment. Finally, ES was related to pathways involved in NAD turnover and serotonin metabolism. These findings suggest that the specific phases of a cycling TT are accompanied by distinct metabolomic profiles, providing novel insights regarding the relevance of specific metabolic pathways on the process of exercise intensity regulation.

Asunto(s)

Ciclismo , Estudios Cruzados , Metaboloma , Humanos , Masculino , Metaboloma/fisiología , Adulto , Ciclismo/fisiología , Ciclo del Ácido Cítrico , Serotonina/sangre , NAD/sangre , NAD/metabolismo , Adulto Joven , Ácido Glutámico/sangre , Ácido Glutámico/metabolismo , Metabolómica , Valina/sangre , Ácido Cítrico/sangre

RESUMEN

INTRODUCTION: Sjögren's disease (SD) is an immune-mediated chronic inflammatory disease that affects epithelial tissues, mainly salivary and lacrimal glands. It also presents extraglandular manifestations. The main renal manifestation is tubulointerstitial nephritis (TIN), which can manifest as renal tubular acidosis (RTA). Urinary citrate may be a biomarker of RTA in these patients. The objective of this study was to evaluate whether hypocitraturia is a predictive biomarker of RTA in a sample of patients with SD in a tertiary hospital in southern Brazil. METHODS: All patients with SD who met the inclusion criteria and who participated in the rheumatology outpatient clinic of the Irmandade Santa Casa de Misericórdia de Porto Alegre were included. Demographic, SD, serological and urinary data were obtained. RTA was considered in those patients who persistently presented urinary pH above 5.5 and serum pH below 7.35. Patients who persistently had urinary pH above 5.5 underwent a urinary acidification test with furosemide and fludrocortisone. These patients received 1 mg of fludrocortisone and 40 mg of furosemide and had their urine samples tested 2, 4 and 6 h after taking the medications. The test was stopped at any urine sample with pH 5.5 or less. The variables were expressed as mean and standard deviation or interquartile range. The association between hypocitraturia and RTA was assessed using the chi-square. RESULTS: Forty-two patients were included, 95.2% female with a median age of 61.73 years. The prevalence of complete distal RTA was 4.88%. Twenty-eight patients underwent urine acidification testing. Five patients had hypocitraturia, and two of them had complete distal RTA. The association between hypocitraturia and RTA was statistically significant (p < 0.012), with a sensitivity of 100%, specificity of 91.2% and accuracy of 91.7%. The negative predictive value was 100%. The global renal assessment of the population demonstrated two patients with RTA, one patient with decreased renal function and six patients with proteinuria greater than 0.5 g/24 h. CONCLUSION: The prevalence of RTA in the studied population was 4.88%. Hypocitraturia had high sensitivity and accuracy for the diagnosis of RTA.

Asunto(s)

Acidosis Tubular Renal , Biomarcadores , Ácido Cítrico , Furosemida , Síndrome de Sjögren , Humanos , Acidosis Tubular Renal/diagnóstico , Acidosis Tubular Renal/orina , Acidosis Tubular Renal/etiología , Síndrome de Sjögren/complicaciones , Síndrome de Sjögren/orina , Síndrome de Sjögren/diagnóstico , Femenino , Biomarcadores/orina , Persona de Mediana Edad , Masculino , Furosemida/uso terapéutico , Furosemida/administración & dosificación , Ácido Cítrico/orina , Fludrocortisona/uso terapéutico , Adulto , Concentración de Iones de Hidrógeno , Anciano , Brasil

RESUMEN

PURPOSE: To evaluate the effect of different finishing and polishing systems on the surface roughness of a resin composite subjected to simulated saliva-, acid-, and enzyme-induced degradation. METHODS: 160 specimens (n= 40) were fabricated with Filtek Z350 XT nanofilled composite and analyzed for average surface roughness (Ra). The specimens were finished and polished using: AD - Al2O3-impreginated rubberized discs (medium, fine, and superfine grit, Sof-Lex); SD - silicon carbide and Al2O3-impregnated rubberized discs (coarse, medium and fine grit, Jiffy,); MB - 12- and 30-multiblade burs. The control group (CT) (n= 40) comprised specimens with a Mylar-strip-created surface. Specimens from each group were immersed in 1 mL of one of the degradation methods (n= 10): artificial saliva (ArS: pH 6.75), cariogenic challenge (CaC: pH 4.3), erosive challenge (ErC: 0.05M citric acid, pH 2.3) or enzymatic challenge (EzC: artificial saliva with 700 µg/mL of albumin, pH 6.75). The immersion period simulated a time frame of 180 days. Ra measurements were also performed at the post-polishing and post-degradation time points. The data were evaluated by three-way ANOVA for repeated measures and the Tukey tests. RESULTS: There was significant interaction between the finishing/polishing system and the degradation method (P= 0.001). AD presented the greatest smoothness, followed by SD. After degradation, CT, AD and SD groups became significantly rougher, but not the MB group, which presented no difference in roughness before or after degradation. CT and AD groups showed greater roughness in CaC, ErC and EzC than in ArS. The SD group showed no difference in roughness when the specimens were polished with CaC, EzC or ArS, but those treated with ErC had greater roughness. In the MB group, the lower roughness values were found after using CaC and EzC, while the higher values were found using ErC or ArS. CLINICAL SIGNIFICANCE: As far as degradation resistance of nanofilled composite to hydrolysis, bacterial and dietary acids and enzymatic reactions is concerned, restorations that had been finished and polished with Al2O3-impregnated discs had the smoothest surfaces.

Asunto(s)

Óxido de Aluminio , Resinas Compuestas , Pulido Dental , Saliva Artificial , Compuestos de Silicona , Propiedades de Superficie , Resinas Compuestas/química , Pulido Dental/métodos , Humanos , Saliva Artificial/química , Concentración de Iones de Hidrógeno , Óxido de Aluminio/química , Compuestos de Silicona/química , Compuestos Inorgánicos de Carbono/química , Ensayo de Materiales , Nanocompuestos/química , Ácido Cítrico/química , Saliva/enzimología , Saliva/metabolismo , Saliva/química , Erosión de los Dientes , Goma/química , Materiales Dentales/química

RESUMEN

OBJECTIVE: This study compared the protective effect of an experimental TiF4/Chitosan toothpaste with a commercial toothpaste on the prevention of erosive tooth wear (ETW) in situ. METHODS: Fifteen subjects took part in this crossover and double-blind study, in which they wore a palatal appliance containing 4 bovine enamel and 4 dentin in 3 phases (5 days each). Half of the samples were subjected to erosive challenges (90 s in 0.1 % citric acid, pH 2.5, 4 times/day), and the other half to erosive plus abrasive challenges (15 s plus 45 s of contact, 2 times/day). The phases corresponded to the application of the different toothpastes: 1) TiF4 (1400 ppm F-) plus Chitosan, 2) Elmex®, Erosion Protection (1400 ppm F-, Chitosan), and 3) Placebo (negative control). Tooth wear was measured using contact profilometry (µm) and submitted to two-way RM ANOVA/Tukey test (p < 0.05). RESULTS: No significant differences were detected between the experimental and commercial toothpastes, regardless of the challenge on both tissues. Both significantly reduce ETW compared to negative control (p < 0.0006). Tooth wear was increased by brushing only on eroded enamel (p < 0.01), but not on dentin (p = 0.6085). TiF4/Chitosan [erosion 2.98 ± 1.12 µm vs. erosion and abrasion 3.12 ± 1.33 µm] and Elmex® toothpastes [erosion 2.35 ± 0.93 µm vs. erosion and abrasion 2.98 ± 1.0 µm] minimized the impact of brushing compared to placebo on enamel [erosion 4.62 ± 1.48 µm vs. erosion and abrasion 5.15 ± 1.50 µm]. CONCLUSIONS: TiF4 plus chitosan toothpastes showed to be effective in minimizing the ETW as the commercial toothpaste is in situ. CLINICAL RELEVANCE: The experimental toothpaste has similar effect against ETW compared to the commercial toothpaste. Considering the increased ETW prevalence worldwide, this result supports clinical trials and a possible application of this experimental anti-erosive toothpaste in the future.

Asunto(s)

Quitosano , Estudios Cruzados , Esmalte Dental , Dentina , Fluoruros , Titanio , Abrasión de los Dientes , Erosión de los Dientes , Pastas de Dientes , Quitosano/uso terapéutico , Erosión de los Dientes/prevención & control , Pastas de Dientes/uso terapéutico , Animales , Esmalte Dental/efectos de los fármacos , Método Doble Ciego , Humanos , Bovinos , Dentina/efectos de los fármacos , Dentina/patología , Adulto , Fluoruros/uso terapéutico , Abrasión de los Dientes/prevención & control , Adulto Joven , Femenino , Masculino , Ácido Cítrico/efectos adversos , Cepillado Dental , Diaminas

RESUMEN

INTRODUCTION: This study aimed to investigate the surface free energy and surface roughness (SR) of metallic alloys under the influence of acid solutions. METHODS: The experiment involved the use of 270 rectangular wire samples measuring 0.019 × 0.025-in. These samples were sourced from 3 different commercial brands: Dentsply GAC, American Orthodontics, and Orthoclassic. This in vitro study categorized the samples into 3 groups based on the solutions employed: deionized water, citric acid, and phosphoric acid. Each group consisted of 90 samples, with 30 samples representing each type of alloy-stainless steel, nickel-titanium, and titanium molybdenum alloy (TMA). The wire segments were immersed in their respective solutions for 72 hours at a controlled temperature of 37°C, with continuous orbital agitation at 130 rpm. After the immersion period, the study analyzed both surface free energy and SR. The mean values obtained were subjected to an analysis of variance at a significance level of 5%. RESULTS: All alloys displayed hydrophobic behavior, as indicated by interaction free energy values <0. In acidic environments (phosphoric acid and citric acid), significant differences were observed among different brands and alloys, affecting surface energy and interaction free energy. Variations in SR among metallic alloys included steel with the lowest SR variations, followed by nickel-titanium and TMA. Notably, the TMA alloy stood out with significantly higher surface energy compared with that of the other alloys (P <0.001). CONCLUSIONS: In this study, all examined alloys demonstrated a hydrophobic nature, suggesting a limited attraction to water. Notably, TMA exhibited the least hydrophobic behavior among the alloys studied. However, when exposed to citric acid, TMA displayed the most substantial alterations in its surface properties. These results underscored the significance of accounting for the distinctive properties of each alloy and their responses to diverse challenges, such as exposure to acidic solutions, during the selection of orthodontic wires for orthodontics treatment.

Asunto(s)

Aleaciones , Aleaciones Dentales , Ensayo de Materiales , Alambres para Ortodoncia , Propiedades de Superficie , Corrosión , Aleaciones Dentales/química , Níquel/química , Titanio/química , Ácido Cítrico/química , Acero Inoxidable/química , Ácidos Fosfóricos/química , Molibdeno/química

RESUMEN

Pectin is widely used in several products in the industry. Conventionally, strong and harmful acids are used for its extraction. This study optimized the extraction of orange peel's pectin using citric acid, considering yield and degree of esterification (DE) as response variables. Proximal analyses were performed, and the samples were subjected to a Box-Behnken design on three central points, considering as variables the temperature, time, and pH. The results of proximate analyses of the orange peels revealed 11.76 % moisture content, 87.26 % volatiles, 0.09 % ash, 50.45 % soluble carbohydrates, 70.60 % total carbohydrates, 0.89 % fixed carbon, 5.35 % lipids, and 36.75 mg GAE/g of phenolic compounds. The resulting second-order polynomial model described the relation of the input and output variables related to each other. The best performance to obtain a higher yield (18.18 %) of high methoxyl pectin (DE 50 %) was set at 100 °C/30 min/pH 2.48. Pectin showed antioxidant properties by ABTS and DPPH assays and similar thermal properties to the commercial polymer. Its equivalent weight was 1219.51 mol/g, and the methoxyl and anhydrouronic acid were 2.23 and 67.10 %, respectively. Hence, pectin extraction with citric acid results in a high-quality polymer and could be used as a gelling agent, stabilizer, or texturizer in food products.

Asunto(s)

Citrus sinensis , Pectinas , Pectinas/química , Citrus sinensis/química , Ácido Cítrico/química , Temperatura , Antioxidantes/farmacología , Excipientes

RESUMEN

Introducción: actualmente la nanotecnología ha cambiado radicalmente el diagnóstico de muchas patologías humanas. El objetivo de este trabajo es obtener nanopartículas de plata para imagen híbrida (99mTc-AgNPs-ICG) que tengan potenciales aplicaciones clínicas en imagen. Materiales y métodos: se mezclaron 2 ml de ácido ascórbico (1.7 x10-4 M), 5 mCi de 99mTcO4-, 2 ml de ácido cítrico (8.0 x 10-4 M) y 0.5 ml de nitrato de plata (2.5 x 10-3 M). El pH de la solución fue 5, y se agitó durante 20 minutos a 37º C. A continuación, se añadieron 2 µl de verde de indocianina (1.3 x 10-3 M) (99mTc-AgNPs-ICG). Las propiedades fisicoquímicas de la solución se caracterizaron mediante UV (λ1 = 420 nm, λ2 = 254 nm) y detector gamma. Se evaluaron la imagen de fluorescencia, el tamaño de las partículas y el espectro IR. Resultados: se obtuvieron nanopartículas de plata en solución acuosa a un pH de 5. Su pH, color y espectro fueron estables durante siete días. Además, el pico principal caracterizado por HPLC, UV y detector Gamma tenía tiempos de retención similares. Su espectro UV mostró una banda de absorción de 420 nm, que corresponde a la banda de absorción plasmónica de estas nanopartículas. El tamaño de las partículas era de 46 nm ± 1,5 nm. El espectro IR mostró bandas de absorción en 3193, 2624, 1596 y 1212 cm-1. Conclusiones: describimos por primera vez en la literatura la síntesis de nanopartículas de plata híbridas (radioactivas y fluorescentes). Se caracterizaron sus propiedades fisicoquímicas, siendo estables y su etiquetado fue reproducible teniendo potenciales aplicaciones biomédicas.

---

Introduction: Currently nanotechnology has radically changed the diagnosis of many human pathologies. The aim of this work is to obtain silver nanoparticles for hybrid imaging (99mTc-AgNPs-ICG) having potential clinical imaging applications. Materials and methods: We mixed 2 ml of ascorbic acid (1.7x10-4 M), 5 mCi of 99mTcO4-, 2 ml of citric acid (8.0 x 10-4 M) and 0.5 ml of silver nitrate (2.5 x 10-3 M). Solution pH was 5, and it was shaken for 20 minutes at 37º C. Afterwards, 2 µL of Indocyanine Green (1.3 x 10-3 M) was added (99mTc-AgNPs-ICG). Physiochemical properties of the solution were characterized by UV (λ1 = 420 nm, λ2 = 254 nm) and gamma detector. Fluorescence image, particle size and IR spectrum were evaluated. Results: Silver nanoparticles were obtained in aqueous solution a pH of 5. Their pH, color and spectrum were stable for seven days. Furthermore, the principal peak characterized by HPLC, UV and Gamma detector had similar retention times. Its UV spectrum showed an absorption band of 420 nm, which corresponds to the plasmon absorption band of these nanoparticles. The particle size was 46 nm ± 1.5 nm. The IR spectrum showed absorption bands in 3193, 2624, 1596 y 1212 cm-1. Conclusions: We describe for the first time in literature the synthesis of hybrid (radioactive and fluorescent) silver nanoparticles. Their physiochemical properties were characterized, being stable and their labelling was reproducible having potential biomedical applications.

---

Introdução: Atualmente, a nanotecnologia mudou radicalmente o diagnóstico de muitas patologias humanas. O objetivo deste trabalho é obter nanopartículas de prata para imagens híbridas (99mTc-AgNPs-ICG) com possíveis aplicações de imagens clínicas. Materiais e métodos: Misturamos 2 ml de ácido ascórbico (1.7 x 10-4 M), 5 mCi de 99mTcO4-, 2 ml de ácido cítrico (8.0 x 10-4 M) e 0.5 ml de nitrato de prata (2.5 x 10-3 M). O pH da solução era 5 e ela foi agitada por 20 minutos a 37º C. Em seguida, foram adicionados 2 µL de indocianina verde (1,3x10-3 M) (99mTc-AgNPs-ICG). As propriedades físico-químicas da solução foram caracterizadas por UV (λ1 = 420 nm, λ2 = 254 nm) e detector gama. A imagem de fluorescência, o tamanho das partículas e o espectro de infravermelho foram avaliados. Resultados: As nanopartículas de prata foram obtidas em solução aquosa com pH de 5. Seu pH, cor e espectro permaneceram estáveis por sete dias. Além disso, o pico principal caracterizado por HPLC, UV e detector gama teve tempos de retenção semelhantes. Seu espectro de UV mostrou uma banda de absorção de 420 nm, que corresponde à banda de absorção plasmônica dessas nanopartículas. O tamanho da partícula foi de 46 nm ± 1,5 nm. O espectro de IV mostrou bandas de absorção em 3193, 2624, 1596 e 1212 cm-1. Conclusões: Descrevemos pela primeira vez na literatura a síntese de nanopartículas de prata híbridas (radioativas e fluorescentes). Suas propriedades físico-químicas foram caracterizadas, sendo estáveis e sua rotulagem foi reprodutível, com possíveis aplicações biomédicas.

Asunto(s)

Nitrato de Plata/síntesis química , Compuestos de Plata/síntesis química , Nanopartículas del Metal/química , Ácido Ascórbico/síntesis química , Radioisótopos , Hidróxido de Sodio/síntesis química , Ácido Cítrico/síntesis química , Lidofenina de Tecnecio Tc 99m/síntesis química , Molibdeno

RESUMEN

OBJECTIVES: This study evaluated the resistance of S-PRG (Surface Pre-Reacted Glass-ionomer) composites and other restorative materials against erosive and abrasive challenges and their protective effect on enamel adjacent to the restorations. MATERIALS AND METHODS: Bovine enamel blocks were prepared and randomized into 12 groups, including 6 types of material, each of them subjected to erosion_e or erosion+abrasion_ea: Beautifil II (S-PRG); Beautifil Bulk Restorative (S-PRG); Filtek Z250 XT; Filtek Bulk Fill; EQUIA Forte; Riva Light Cure. Cavities were prepared in the middle of enamel blocks and restored with the materials. Initial profiling measurement was performed on the material and on adjacent enamel (100, 200, 300, 600 and 700 µm from the restoration margin). Palatal intraoral appliances with the restored enamel blocks were used by the volunteers (n = 10). During 5 days appliances were immersed in 2.5 % citric acid for 2 min; 6 × /day (erosion_e). For ea condition, blocks were brushed for 1 min after each acid immersion. Final profile assessment was performed. Data were analysed by two and three way ANOVA followed by Tukey's test (p < 0.05). RESULTS: Material wear: Riva Light Cure showed the highest wear followed by EQUIA Forte and then all resin composites, including the ones with S-PRG (p = 0.000). Enamel wear: there was significant interaction among type of restorative material, wear condition and distance (p = 0.014), enamel around materials showed similar wear (p = 0.983) and the enamel subjected to ea exhibited highest wear (p = 0.000). CONCLUSION: SPRG based composites showed resistance against erosive and abrasive challenges but were not able to protect enamel adjacent to the restorations. CLINICAL SIGNIFICANCE: S-PRG composites exhibit resistance to material wear comparable to resin composites. However, they have shown an inability to effectively protect the adjacent enamel under in situ erosive-abrasive conditions, despite the presence of mineral-loss-preventing ions surrounding materials.

Asunto(s)

Erosión de los Dientes , Animales , Bovinos , Humanos , Erosión de los Dientes/prevención & control , Materiales Dentales , Esmalte Dental , Cementos de Ionómero Vítreo , Ácido Cítrico

RESUMEN

Extracorporeal circuits used in renal replacement therapy (RRT) can develop thrombosis, leading to downtimes and reduced therapy efficiency. To prevent this, anticoagulation is used, but the optimal anticoagulant has not yet been identified. Heparin is the most widely used anticoagulant in RRT, but it has limitations, such as unpredictable pharmacokinetics, nonspecific binding to plasma proteins and cells, and the possibility of suboptimal anticoagulation or bleeding complications, specifically in critically ill patients with acute renal failure who are already at high risk of bleeding. Citrate anticoagulation is a better alternative, being considered a standard for continuous renal replacement therapy, since it is associated with a lower risk of bleeding complications and better efficacy, even in patients with acute renal failure or liver disease. The aim of this article is to provide an updated review of the different strategies of anticoagulation in renal replacement therapies that can be implemented in critical scenarios, focusing on the advantages and disadvantages of each one and the beneficial aspects of using citrate over heparin in critical ill patients.

Asunto(s)

Lesión Renal Aguda , Heparina , Humanos , Heparina/uso terapéutico , Enfermedad Crítica/terapia , Anticoagulantes/efectos adversos , Terapia de Reemplazo Renal , Ácido Cítrico/uso terapéutico , Citratos , Lesión Renal Aguda/terapia

RESUMEN

This study aimed to assess the suitability of egg yolk (EY) supplementation to a tris-citric acid-based extender on cryosurvival of guinea pig (Cavia porcellus) epididymal spermatozoa. Two synthetic-based extenders, tris-citric acid-glucose plus 20% EY (TCG-EY) and tris-citric acid-fructose (TCF) both with 5% glycerol, were compared. Thirty-two epididymides were recovered from 16 adult guinea pig males by gonadectomy, and then the sperm samples were retrieved by retrograde flushing using TCG-EY and TCF extenders for left or right epididymis, respectively. TCG-EY and TCF sperm samples were frozen in static liquid nitrogen vapors through a two-step cooling procedure. Before freezing, the percentage of progressive sperm motility and sperm with intact plasma and acrosome membranes from TCG-EY sperm samples were higher (p < 0.05) than those diluted with TCF. Post-thaw sperm kinematic variables and membrane integrity were drastically reduced (p < 0.001) compared with prefreezing samples, regardless of extender type. The post-thaw plasmatic and acrosome membrane integrity from TCG-EY sperm samples was higher (p < 0.05) than those from TCF samples. Except for the length, the morphometric head dimensions of sperm diluted with TCG-EY or TCF did not vary (p > 0.05) after the freezing-thawing process compared with the prefreezing samples. In conclusion, despite greater cell cryoinjury with both extenders, the EY supplementation exerted greater cell membrane protection before and after the freezing-thawing process. This research shows an in-depth analysis of guinea pig sperm cryopreservation; however, more studies are recommended.

Asunto(s)

Yema de Huevo , Preservación de Semen , Masculino , Cobayas , Animales , Porcinos , Epidídimo , Ácido Cítrico/farmacología , Motilidad Espermática , Semen , Espermatozoides , Criopreservación/métodos , Preservación de Semen/métodos , Crioprotectores/farmacología

RESUMEN

Aim: To evaluate the protection offered by commercial mouthwashes containing sodium fluoride or stannous chloride associated with sodium fluoride to enamel and dentin, prior to erosive and abrasive cycling. Materials and Methods: Enamel and dentin samples were obtained from bovine incisors and subdivided into 3 groups (n=10), according to the fluoridated ingredient tested: FS (sodium fluoride - NaF (225 ppm)); FE (tin fluoride - NaF + SnCl2 (800 ppm Sn2+)); control (distilled water). The samples were submitted to an erosive/abrasive cycle with immersion in citric acid (lemon soda for 5 min, 4×/day, 5 days, with remineralization intervals in artificial saliva for 60 min). Abrasion was carried out with an electric brush (200 g/force) after the first and last cycles, 2x/day, and immediately afterward immersed in the tested solutions. Structure loss was obtained by optical profilometry. The data were subjected to analysis of variance and multiple comparison for each substrate separately. Results: For enamel there was a difference between the groups (p = 0.027), with the FS showing less loss of structure compared to the control 2.02 (±0.48). The FE group showed similar loss to the control and FS 2.32 (±0.58)ab. For dentin there was a difference between the groups (p = 0.011), with FE showing less loss of structure compared to the other groups, 0.82 (25% - 0.34; 75% - 0.95). Discussion: The protection of fluorides in erosive/abrasive challenges depends on the type and dental substrate. Conclusion: Mouthwash with sodium fluoride prior to erosive/abrasive challenges caused less loss of enamel surface, while for dentin, sodium fluoride associated with stannous chloride caused less loss of structure.

---

Objetivo: Avaliar a proteção oferecida por soluções para bochecho de fluoreto de sódio ou cloreto de estanho associado ao fluoreto de sódio ao esmalte e à dentina, previamente à ciclagem erosiva e abrasiva. Materiais e Métodos: Amostras de esmalte e dentina foram obtidas a partir de incisivos bovinos e subdivididas em 3 grupos (n=10), de acordo com o princípio ativo fluoretado testado: FS (fluoreto de sódio - NaF (225 ppm)); FE (fluoreto de estanho - NaF + SnCl2 (800 ppm Sn2+)); controle (água destilada). As amostras foram submetidas a um ciclo erosivo/abrasivo com imersão em ácido cítrico (refrigerante de limão por 5 min, 4×/dia, 5 dias, com intervalos de remineralização em saliva artificial por 60 min). A abrasão foi realizada com escova elétrica (200 g/força) após o primeiro e o último ciclos, 2×/dia, e logo em seguida imersos nas soluções testadas. A perda de estrutura foi obtida por perfilometria óptica. Os dados foram submetidos à análise de variância e comparação múltipla para cada substrato separadamente. Resultados: Para esmalte houve diferença entre os grupos (p = 0,027), tendo o FS apresentados menor perda de estrutura comparado ao controle 2,02 (±0,48). O grupo FE apresentou perda similar ao controle e ao FS 2,32 (±0,58)ab. Para dentina houve diferença entre os grupos (p = 0,011), sendo que o FE apresentou menor perda de estrutura comparado aos demais grupos 0,82 (25% - 0,34; 75% - 0,95). Discussão: A proteção dos fluoretos em desafios erosivos/abrasivos depende do tipo e do substrato dental. Conclusão: O bochecho com fluoreto de sódio previamente aos desafios erosivos/abrasivos apresentou menor perda de superfície em esmalte, enquanto para dentina o fluoreto de sódio associado ao cloreto de estanho apresentou menor perda de estrutura.

Asunto(s)

Animales , Abrasión de los Dientes , Desgaste de los Dientes , Ácido Cítrico , Pulido Dental

RESUMEN

Gold nanoparticles (AuNPs) exhibit unique properties that make them appealing for applications in biosensing and other emerging fields. Despite the availability of numerous synthesis methods, important questions remain to be addressed regarding the volume effect on the synthesis yield and quality of AuNPs in the light of biosensing research. The present study addresses these issues by developing a novel microvolumetric citrate-reduction method to improve the synthesis of AuNPs, which were characterized by electronic microscopy, energy dispersive spectroscopy, zeta potential and colorimetric analysis. A comparison of the novel microsynthesis method with the standard Turkevich method demonstrated its superior performance in terms of yield, monodispersity, rapidity (in one step), reproducibility, and stability. The analytical behavior of AuNPs-based aptasensors prepared by microsynthesis was investigated using kanamycin detection and showed higher reproducibility and improved detection limits (3.4 times) compared to those of Turkevich AuNPs. Finally, the effect of pH was studied to demonstrate the suitability of the method for the screening of AuNP synthesis parameters that are of direct interest in biosensing research; the results showed an optimal pH range between 5.0 and 5.5. In summary, the approach described herein has the potential to improve research capabilities in biosensing, with the added benefits of lowering costs and minimizing waste generation in line with current trends in green nanotechnology.

Asunto(s)

Técnicas Biosensibles , Nanopartículas del Metal , Oro/química , Nanopartículas del Metal/química , Reproducibilidad de los Resultados , Ácido Cítrico , Técnicas Biosensibles/métodos

RESUMEN

The use of regional citrate anticoagulation (RCA) in liver failure (LF) patients can lead to citrate accumulation. We aimed to evaluate serum levels of citrate and correlate them with liver function markers and with the Cat/Cai in patients under intensive care and undergoing continuous venovenous hemodiafiltration with regional citrate anticoagulation (CVVHDF-RCA). A prospective cohort study in an intensive care unit was conducted. We compared survival, clinical, laboratorial and dialysis data between patients with and without LF. Citrate was measured daily. We evaluated 200 patients, 62 (31%) with LF. Citrate was significantly higher in the LF group. Dialysis dose, filter lifespan, systemic ionized calcium and Cat/Cai were similar between groups. There were weak to moderate positive correlations between Citrate and indicators of liver function and Cat/Cai. The LF group had higher mortality (70.5% vs. 51.8%, p = 0.014). Citrate was an independent risk factor for death, OR 11.3 (95% CI 2.74-46.8). In conclusion, hypercitratemia was an independent risk factor for death in individuals undergoing CVVHDF-ARC. The increase in citrate was limited in the LF group, without clinical significance. The correlation between citrate and liver function indicators was weak to moderate.

Asunto(s)

Ácido Cítrico , Terapia de Reemplazo Renal Continuo , Humanos , Estudios Prospectivos , Anticoagulantes/uso terapéutico , Diálisis Renal , Citratos

RESUMEN

BACKGROUND: Prolonged hemodialysis (HD) is performed from 6 to 12 h and can last up to 24 h. To prevent system clotting some studies suggest that Regional Citrate Anticoagulation (RCA) use reduces bleeding rates relative to systemic heparin. However, there may be difficulties in the patient's clinical management and completing the prescribed HD with Genius system using RCA. OBJECTIVE: To analyze safety Quality Indicators (IQs) and follow up on prolonged HD with 4% sodium citrate solution in a Genius® hybrid system. METHODS: This is a retrospective cohort conducted in an intensive care unit. RESULTS: 53 random sessions of prolonged HD with 4% sodium citrate solution of critically ill patients with AKI assessed. Evaluated safety indicators were dysnatremia and metabolic alkalosis, observed in 15% and 9.4% of the sessions, respectively. Indicators of effectiveness were system clotting which occurred in 17.3%, and the minimum completion of the prescribed HD time, which was 75.5%. CONCLUSION: The assessment of the indicators showed that the use of RCA with a 4% sodium citrate solution in prolonged HD with the Genius system in critically ill patients with AKI can be performed in a simple, safe, and effective way.

Asunto(s)

Lesión Renal Aguda , Ácido Cítrico , Humanos , Lesión Renal Aguda/terapia , Anticoagulantes/uso terapéutico , Citratos/uso terapéutico , Ácido Cítrico/uso terapéutico , Enfermedad Crítica/terapia , Heparina/efectos adversos , Indicadores de Calidad de la Atención de Salud , Diálisis Renal , Estudios Retrospectivos , Citrato de Sodio

RESUMEN

Food additives are ingredients added to food and beverages in order to modify physical, chemical, biological or sensory characteristics, contributing to the development of products that are safer and more convenient and attractive. Although they are widely used by food industries, little is known about the distribution of the food additives currently employed in products marketed in Brazil. Therefore, this study aimed to use labelling information of commercial food and beverages in order to identify the substances currently used by the Brazilian industry. For this, 3300 labels of 426 food items described in the Personal Food Consumption module of the Household Budget Survey (POF 2017/2018) of the Brazilian Institute of Geography and Statistics (IBGE) were searched on websites of supermarket chains and food companies as well as by visits to commercial establishments. According to the ingredient lists of the evaluated samples, 186 distinct food additives were identified. The average number of declared substances per product was between 4 and 5, with most of the labels indicating the presence of 2 or 3 additives. Considering the identified substances, 93 had an Acceptable Daily Intake (ADI) not specified or not limited and 89 were additives with a numerical ADI. Citric acid and lecithin were the most frequent substances with ADI not specified or not limited while potassium sorbate and pentasodium triphosphate were the most frequent food additives with numerical ADI. The most frequent combinations found in the evaluated samples were of potassium sorbate and citric acid, and also sodium nitrite, sodium erythorbate, and sodium diphosphate. This study demonstrates the distribution of food additives in products marketed in Brazil, allowing the creation of a comprehensive and unprecedented database, which will contribute to the evaluation of usage trends and future exposure studies for health risk assessment.

Asunto(s)

Aditivos Alimentarios , Ácido Sórbico , Brasil , Medición de Riesgo , Ácido Cítrico