RESUMEN

Isoreticular chemistry, which enables property optimization by changing compositions without changing topology, is a powerful synthetic strategy. One of the biggest challenges facing isoreticular chemistry is to extend it to ligands with strongly coordinating substituent groups such as unbound -COOH, because competitive interactions between such groups and metal ions can derail isoreticular chemistry. It is even more challenging to have an isoreticular series of carboxyl-functionalized MOFs capable of encompassing chemically disparate metal ions. Here, with the simultaneous introduction of carboxyl functionalization and pore space partition, a family of carboxyl-functionalized materials is developed in diverse compositions from homometallic Cr3+ and Ni2+ to heterometallic Co2+/V3+, Ni2+/V3+, Co2+/In3+, Co2+/Ni2+. Cr-MOFs remain highly crystalline in boiling water. Unprecedentedly, one Cr-MOF can withstand the treatment cycle with 10m NaOH and 12m HCl, allowing reversible inter-conversion between unbound -COOH acid form and -COO- base form. These materials exhibit excellent sorption properties such as high uptake capacity for CO2 (100.2 cm3 g-1) and hydrocarbon gases (e.g., 142.1 cm3 g-1 for C2H2, 110.5 cm3 g-1 for C2H4) at 1 bar and 298K, high benzene/cyclohexane selectivity (up to ≈40), and promising separation performance for gas mixtures such as C2H2/CO2 and C2H2/C2H4.

RESUMEN

Researchers unremittingly strive to develop innovative luminophores to enhance intrinsic electrochemiluminescence (ECL) performance. However, the potential to harness facile strategies, such as manipulating the physical properties of luminophores while retaining functional chemical properties to fabricate cost-effective ECL complexes, remains underexplored. Herein, we reported a novel and efficient one-step galvanic technique to actualize aggregation-enhanced ECL (AEECL) of ruthenium complexes. It marked the first instance of the galvanic process being employed to synthesize aggregate luminophores through electrostatic attraction. The ECL intensity and efficiency of the prepared ruthenium complexes with AEECL properties surpassed traditional ruthenium complexes by 8.9 and 13.6 times, respectively, outperforming most reported luminophores. Remarkably, the target luminophore exhibited high stability across varied scan rates and temperatures. Furthermore, a binder-free and carbon paper-based AEECL analytical device for lidocaine detection was fabricated, achieving a satisfactory detection limit (0.34 nM) and selectivity. The convenient modulation strategy of aggregate structure, along with the transformative leap from insufficient ECL to AEECL, bring forth a new revenue in aggregate science. This research also promises a universally applicable and versatile protocol for future biological analysis and bioimaging applications.

Asunto(s)

RESUMEN

The construction of heterostructure materials has been demonstrated as the promising approach to design high-performance anode materials for sodium ion batteries (SIBs). Herein, micro-mesoporous cobalt phosphosulfide nanowires (Co3S4/CoP/NC) with Co3S4/CoP hetero-nanocrystals encapsulating into N-doped carbon frameworks were successfully synthesized via hydrothermal reaction and subsequent phosphosulfidation process. The obtained micro-mesoporous nanowires greatly improve the charge transport kinetics from the facilitation of the charge transport into the inner part of nanowire. When evaluated as SIBs anode material, the Co3S4/CoP/NC presents outstanding electrochemical performance and battery properties owing to the synergistic effect between Co3S4 and CoP nanocrystals and the conductive carbon frameworks. The electrode material delivers outstanding reversible rate capacity (722.33 mAh/g at 0.1 A/g) and excellent cycle stability with 522.22 mAh/g after 570 cycles at 5.0 A/g. Besides, the Ex-situ characterizations including XRD, XPS, and EIS further revealed and demonstrated the outstanding sodium ion storage mechanism of Co3S4/CoP/NC electrode. These findings pave a promising way for the development of novel metal phosphosulfide anodes with unexpected performance for SIBs and other alkali ion batteries.

RESUMEN

Growing concerns over poor air quality, especially in urban and industrial regions, have led to increased global demands for advanced air-purification technologies. However, the stability and airborne pollutant control abilities of the available air-purification materials under diverse environmental conditions are limited. Thus, the advanced development of filtration materials that can effectively control different types of pollutants, such as particulate matter (PM) and gaseous pollutants, simultaneously has attracted attention. The zeolitic imidazolate framework (ZIF), a type of porous metal-organic framework (MOF), is a promising material for capturing weakly acidic toxic gases such as SO2 owing to its excellent adsorption performance and high thermal and chemical stability. In this study, we successfully developed an ultrastable necklace-like multifunctional hybrid membrane via the cetyltrimethylammonium bromide-assisted in situ growth of zeolitic imidazolate framework (ZIF)-67 crystals on electrospun Co2+-doped poly(vinylidene fluoride) nanofibers (70 nm) that can be used in different moisture environments to achieve sustainable air-filtration performance. The hybrid nanocomposite membrane demonstrated excellent performance for the simultaneous control of intractable fine PM0.3 (filtration efficiency, 99.461%) and SO2 (adsorption capacity, 1476.5 mg g-1) under different humidity conditions. This study contributes to the optimal synergistic integration of the advanced metal-organic framework (MOF)-nanofiber nanocomposite membranes and can guide the rational design and conceptualization of a facile and novel membrane for various applications in the environmental science and energy fields.

RESUMEN

Flexible supercapacitors are favorable for wearable electronics. However, their high-rate capability and mechanical properties are limited because of unsatisfactory ion transfer kinetics and interfacial modulus mismatch inside devices. Here, we develop a metal-organic framework interface with superior electrical and mechanical properties for supercapacitors. The interfacial mechanism facilitates ultrafast ion transfer with an energy barrier reduction of 43% compared with that of conventional transmembrane transport. It delivers high specific capacity at a wide rate range and exhibits ultrastability beyond 30000 charge-discharge cycles. Furthermore, meliorative modulus mismatch benefited from ultrathin interface design that improves mechanical properties of flexible supercapacitors. It delivers a stable energy supply under various mechanical conditions like bending and twisting status and displays ultrastable mechanical properties with performance retention of 95.5% after 10 000 bending cycles. The research paves the way for interfacial engineering for ultrastable electrochemical devices.

RESUMEN

Sodium-ion batteries (SIBs) have great potential as electrochemical energy storage systems; however, their commercial viability is limited by the lack of anode materials with fast charge/discharge rates and long lifetimes. These challenges were addressed by developing a multi-interface design strategy using FCSe (FeSe2/CoSe2) nanoparticles on V4C3Tx MXene nanosheets as conductive substrates. The heterogeneous interface created between the two materials provided high-speed transport of sodium ions, suppressed the chalking-off of nanoparticles, and improved the cycling stability. Additionally, the Fe-Co bonds generated at the interface effectively relieved mechanical stress, further enhancing the electrode durability. The C@FCSe@V4C3 electrode exhibited high-speed charging and discharging characteristics, and maintained a high specific capacity of 260.5 mAh g-1 even after 15,000 cycles at 10 A g-1, with a capacity retention rate of 50.2% at an ultrahigh current density of 20 A g-1. Furthermore, the composite displayed a good cycling capability in the fast discharge and slow charge mode. This demonstrates its promising commercial potential. This multi-interface design strategy provides insights and guidance for solving the reversibility and cycling problems of transformed selenide anode materials.

RESUMEN

Conventional indirect X-ray detectors employ scintillating phosphors to convert X-ray photons into photodiode-detectable visible photons, leading to low conversion efficiencies, low spatial resolutions, and optical crosstalk. Consequently, X-ray detectors that directly convert photons into electric signals have long been desired for high-performance medical imaging and industrial inspection. Although emerging hybrid inorganic-organic halide perovskites, such as CH3 NH3 PbI3 and CH3 NH3 PbBr3 , exhibit high sensitivity, they have salient drawbacks including structural instability, ion motion, and the use of toxic Pb. Here, this work reports an ultrastable, low-dose X-ray detector comprising KTaO3 perovskite films epitaxially grown on a Nb-doped strontium titanate substrate using a low-cost solution method. The detector exhibits a stable photocurrent under high-dose irradiation, high-temperature (200 °C), and aqueous conditions. Moreover, the prototype KTaO3 -film-based detector exhibits a 150-fold higher sensitivity (3150 µC Gyair -1 cm-2 ) and 150-fold lower detection limit (<40 nGyair s-1 ) than those of commercial α-Se-based direct detectors. Systematic investigations reveal that the high stability of the detector originates from the strong covalent bonds within the KTaO3 film, whereas the low detection limit is due to a lattice-gradient-driven built-in electric field and the high insulating property of KTaO3 film. This study unveils a new path toward the fabrication of green, stable, and low-dose X-ray detectors using oxide perovskite films, which have significant application potential in medical imaging and security operations.

RESUMEN

Flexible memory and wearable electronics represent an emerging technology, thanks to their reliability, compatibility, and superior performance. Here, an Sb2TexSe3-x (STSe) phase change material was grown on flexible mica, which not only exhibited superior nature in thermal stability for phase change memory application but also revealed novel function performance in wearable electronics, thanks to its excellent mechanical reliability and endurance. The thermal stability of Sb2Te3 was improved obviously with the crystallization temperature elevated 60 K after Se doping, for the enhanced charge localization and stronger bonding energy, which was validated by the Vienna ab initio simulation package calculations. Based on the ultra-stability of STSe, the STSe-based phase change memory shows 65 000 reversible phase change ability. Moreover, the assembled flexible device can show real-time monitoring and recoverability response in sensing human activities in different parts of the body, which proves its effective reusability and potential as wearable electronics. Most importantly, the STSe device presents remarkable working reliability, reflected by excellent endurance over 100 s and long retention over 100 h. These results paved a novel way to utilize STSe phase change materials for flexible memory and wearable electronics with extreme thermal and mechanical stability and brilliant performance.

Asunto(s)

RESUMEN

Comprehending and controlling the stability of glasses is one of the most challenging issues in glass science. Here we explore the microscopic origin of the ultrastability of a Cu-Zr-Al metallic glass (MG). It is revealed that the ultrastable window (0.7-0.8 Tg) of MGs correlates with the enhanced degree of nanoscale-to-mesoscale structural/mechanical heterogeneity and the connection of stability-favored clusters. On one side, the increased fraction of stability-favored clusters promotes the formation of a stable percolating network through a critical percolation transition, which is essential to form ultrastable MG. On the other side, the enhanced heterogeneity arising from an increased distribution in local clusters may promote synergistically a more efficient and frustrated packing of amorphous structure, contributing to the ultrastability. The present work sheds new light on the stability of MGs and provides a step toward next-generation MGs with superior stability and performances.

RESUMEN

Thanks to the excellent optoelectronic properties, lead halide perovskites (LHPs) have been widely employed in high-performance optoelectronic devices such as solar cells and light-emitting diodes. However, overcoming their poor stability against water has been one of the biggest challenges for most applications. Herein, we report a novel hot-injection method in a Pb-poor environment combined with a well-designed purification process to synthesize water-dispersible CsPbBr3 nanocrystals (NCs). The as-prepared NCs sustain their superior photoluminescence (91% quantum yield in water) for more than 200 days in an aqueous environment, which is attributed to a passivation effect induced by excess CsBr salts. Thanks to the ultra-stability of these LHP NCs, for the first time, we report a new application of LHP NCs, in which they are applied to electrocatalysis of CO2 reduction reaction. Noticeably, they show significant electrocatalytic activity (faradaic yield: 32% for CH4, 40% for CO) and operation stability (> 350 h).

RESUMEN

Lead halide perovskite has in recent years gained widespread interest due to its excellent physical and chemical properties, as well as superior optoelectronic performance. However, some restrictions still preclude full industrialization of the material, in particular toxicity issues and instability as a result to sensitivity to humidity. Lead-free all-inorganic double perovskite materials have thus recently become a focus of research. Herein, a new narrow bandgap lead-free double perovskite solar cell with a high-quality Cs2PtI6 film is proposed. It exhibits an optical bandgap of 1.37 eV, absorption within a wide range of wavelengths, and a high absorption coefficient. Following optimization, the device displays a best power conversion efficiency of 0.72% with an open-circuit voltage of 0.73 V, a short-circuit current of 1.2 mA/cm2, and a fill factor of 0.82. Crucially, it also demonstrates excellent stability when exposed to extreme conditions such as high humidity, high temperature, and UV-light irradiation. Stability tests show that the PSCs can retain almost 80% of the original efficiency over 60 days stored in ambient temperature without any encapsulation, boosting prospects for applications of lead-free perovskite solar cells.

RESUMEN

Aqueous hybrid supercapacitors are attracting increasing attention due to their potential low cost, high safety and eco-friendliness. However, the narrow operating potential window of aqueous electrolyte and the lack of suitable negative electrode materials seriously hinder its future applications. Here, we explore high concentrated lithium acetate with high ionic conductivity of 65.5 mS cm-1 as a green "water-in-salt" electrolyte, providing wide voltage window up to 2.8 V. It facilitates the reversible function of niobium tungsten oxide, Nb18W16O93, that otherwise only operations in organic electrolytes previously. The Nb18W16O93 with lithium-ion intercalation pseudocapacitive behavior exhibits excellent rate performance, high areal capacity, and ultra-long cycling stability. An aqueous lithium-ion hybrid capacitor is developed by using Nb18W16O93 as negative electrode combined with graphene as positive electrode in lithium acetate-based "water-in-salt" electrolyte, delivering a high energy density of 41.9 W kg-1, high power density of 20,000 W kg-1 and unexceptionable stability of 50,000 cycles.

RESUMEN

Gold nanoclusters (Au NCs) using fibrinogen (FBG) protein as template are fabricated via one-pot reduction strategy, and applied for fluorometric detections of cysteine (Cys) and mercury(II). The modified FBG-Au NCs exhibit red fluorescence, with excitation/emission maxima at 360/620 nm, a 7% quantum yield, and a 2.2 µs decay time. The fluorescence of the nanoprobe is quenched by Cys and Hg(II). Cys can be determined by fluorometry in the 0.01 to 150 µmol L-1 concentration range and with a detection limit of 0.79 µmol L-1. Due to the oxidation of Hg(II), it can be detected in the 0.01 to 10 µmol L-1 concentration range. The properties of the FBG-Au NCs and the analytical performance are comparable with previously reported peptide/protein-templated Au NCs, supplying a promising candidate for Au NCs nanoprobes synthesis and applications. Graphical abstractSchematic representation of the preparation of gold nanoclusters (Au NCs) using fibrinogen (FBG) as the template. The modified Au NCs were applied to the fluorometric detection of cysteine (Cys) and mercury ion (Hg(II)).

Asunto(s)

RESUMEN

Nanotechnologies are increasingly being developed for medical purposes. However, these nanomaterials require ultrastability for better control of their pharmacokinetics. The present study describes three types of ultrastable gold nanoparticles stabilized by thiolated polyethylene glycol groups remaining intact when subjected to some of the harshest conditions described thus far in the literature, such as autoclave sterilization, heat and freeze-drying cycles, salts exposure, and ultracentrifugation. Their stability is characterized by transmission electron microscopy, UV-visible spectroscopy, and dynamic light scattering. For comparison purposes, two conventional nanoparticle types were used to assess their colloidal stability under all conditions. The ability of ultrastable gold nanoparticles to encapsulate bimatoprost, a drug for glaucoma treatment, is demonstrated. MTS assays on human corneal epithelial cells is assessed without changing cell viability. The impact of ultrastable gold nanoparticles on wound healing dynamics is assessed on tissue engineered corneas. These results highlight the potential of ultrastable gold nanoparticles as a drug delivery system in ocular therapy.

Asunto(s)

RESUMEN

Encapsulation of luminescent perovskite quantum dots (QDs) into a solid matrix has been approved to be an efficient way to improve their stability. In this work, we reported a green encapsulation method to produce ultrastable CH3NH3PbBr3 QDs incorporated into the SiO2 matrix. Specifically, fresh-prepared CH3NH3PbBr3 QDs were covalently embedded into silica by an aqueous sol-gel method assisted with CH3NH3Br, which not only effectively inhibited the water-driven degradation of QDs through surface coordination, but also strongly stabilized the QDs in solid powder via concentration gradient. As far as we know, this silica encapsulation of perovskite QDs in aqueous environments is reported for the first time. Luminescent properties of perovskite QDs during the course of gelation as well as in resulting composite powder were investigated using steady-state and time-resolved spectroscopies, and a 2 wt % QD-doped sample treated with 11.5 mM of CH3NH3Br was demonstrated to be the optimal phosphor. The green-emissive phosphor had a PLQY of 60.3% and a full width at half maxima of ∼25 nm, exhibiting ultrahigh stability tested by cycle heating (120 °C), continuous heating (80 °C, 60 h), and light irradiation (450 nm light, 350 h). The phosphor was readily blended with polymers and applied as a color-converting layer on blue light-emitting diodes.

RESUMEN

The unstability of organolead halide perovskite under continuous illumination, moisture, and high temperature has seriously impeded its commercial development for long-period applications. Here, a facile method was developed to grow ultrastable CH3NH3PbBr3 milliwires through the reaction of self-assembled PbBr2 milliwire with CH3NH3Br at room temperature. The initial self-assembled PbBr2 milliwire is that PbBr2 complexed with dimethylformamide (DMF) molecular self-assemble into perovskite-type PbBr2. Crystal conversion from PbBr2 to CH3NH3PbBr3 milliwire occurred in the molecular exchange between CH3NH3Br and DMF. The synthesized CH3NH3PbBr3 milliwires present high stability under high humidity ∼75%, continuous illumination, heating, and sustain ultrastability in air for more than 255 days. In addition, the CH3NH3PbBr3 milliwire can be dynamically degraded and reconstructed in the presence of water molecules. The milliwires have strong band-edge photoluminescence (PL) with PL lifetime of ∼110 ns. On the basis of the mono-milliwire-constructed photodetector, it exhibits high photoresponse and fast response time of 0.407 s.

RESUMEN

A novel label-free immunosensor based on hyperbranched polyester nanoparticles with nitrite groups (HBPE-NO2), which were synthesized through a simple one-step chemical reaction, was first developed for specific detection of α-fetoprotein (AFP), the tumor marker for liver cancer. The obtained HBPE-NO2 nanoparticles (NPs) were characterized by the proton nuclear magnetic resonance spectroscopy (1H NMR), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). And the fabricated process of immunosensor was investigated by attenuated total reflection Fourier-transform infrared spectra (ATR-FTIR), static water contact angles, scanning electron microscope (SEM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The electrochemical performances of the AFP immunosensor were studied. Results indicated the prepared HBPE-NO2-modified immunosensor showed excellent electrochemical properties and satisfactory accuracy for the detection of AFP of the real clinical samples that attributed to the properties of the HBPE-NO2 NPs, which had nanosized structure to increase the specific surface area and unique chemical reactivity for loading capacity of protein molecules. Construction of biosensors using the structure and properties of hyperbranched molecules will offer ideal electrode substrates, which provided more possibilities for the design of biosensor.

Asunto(s)

RESUMEN

Endogenous viral elements (EVE) seem to be present in all eukaryotic genomes. The composition of EVE varies between different species. The endogenous retrovirus 3 (ERV3) is one of these elements that is present only in humans and other Catarrhini. Conservation of ERV3 in most of the investigated Catarrhini and the expression pattern in normal tissues suggest a putative physiological role of ERV3. On the other hand, ERV3 has been implicated in the pathogenesis of auto-immunity and cancer. In the present review we summarize knowledge about this interesting EVE. We propose the model that expression of ERV3 (and probably other EVE loci) under pathological conditions might be part of a metazoan SOS response.

RESUMEN

A new family of over-coordinated hydrogenated silicon nanoclusters with outstanding optical and mechanical properties has recently been proposed. For one member of this family, namely the highly symmetric Si19 H12 nanocrystal, strain calculations have been presented with the goal to question its thermal stability and the underlying mechanism of ultrastability and electron-deficiency aromaticity. Here, the invalidity of these strain energy (SE) calculations is demonstrated mainly based on a fundamentally wrong usage of homodesmotic reactions, the miscounting of atomic bonds, and arithmetic errors. Since the article in question is entirely anchored on those erroneous SE values, all of its conclusions and predictions become without meaning. We provide evidence here that the nanocrystal in question suffers from such low levels of strain that its thermodynamical stability should be largely sufficient for device fabrication in a realistic plasma reactor. Most remarkably, the two "alternative," irregular isomers explicitly proposed in the aforementioned article are also electron-deficient, nontetrahedral, ultrastable, and aromatic nicely underlining the universality of the ultrastability concept for nanometric hydrogenated silicon clusters.

Asunto(s)