RESUMEN
A series of 3,3"- and 4,4"-dimethoxy terphenyls with different second substituents on their ortho-positions have been synthesized and investigated upon the possibility to be oxidatively cyclodehydrogenated to the corresponding triphenylenes under Scholl-type conditions. The experimentally obtained selectivities were supported and explained by quantum chemical calculations and conclusions on the involved mechanisms (acid catalyzed arenium-ion mechanism (AIM) vs radical cation mechanism) were drawn.
RESUMEN
First-principles calculations engaging density functional theory (DFT) are employed to systematically study the optical characteristics of monolayer and bilayer boron nitride (BN) triphenylene-graphdiyne (Tp-BNyne) structures featuring varying lengths of C-chains. The thermal stability of Tp-BNyne structures at temperatures up to 1000 K is verified. The weak van der Waals interactions due to the small binding energies and significant interlayer distances maintain the cohesion between the layers. The investigation revealed that all Tp-BNyne structures under examination exhibit semiconductor behavior with a band gap in the range of 0.97-2.74 eV. The bilayer configurations demonstrated a narrower energy band gap in comparison to the monolayer ones. Increasing the length of C-chains leads to a reduction in the energy band gap. Delving into the optical behavior of Tp-BNyne structures under photon incidence with parallel and perpendicular polarizations, a distinct anisotropy in the optical characteristics of Tp-BNyne is revealed. The static dielectric constant increases and the optical band gap decreases with increasing C-chain length. The absorption coefficients of monolayer and bilayer Tp-BNyne structures, on the order of 107/m, demonstrate that these sheets can effectively absorb light in the visible and ultraviolet regions. These findings present Tp-BNyne sheets as promising candidates for use in photovoltaic devices to convert sunlight into electrical current, as well as for designing optical devices for ultraviolet protection. Additionally, Tp-BNyne structures are transparent materials, especially in the high-energy range.
RESUMEN
The long-emission-lifetime nature of room-temperature phosphorescence (RTP) materials lays the foundation of their applications in diverse areas. Despite the advantage of mechanical property, processability and solvent dispersity, the emission lifetimes of polymer-based room-temperature phosphorescence materials remain not particularly long because of the labile nature of organic triplet excited states under ambient conditions. Specifically, ambient phosphorescence lifetime (τP) longer than 2 s and even 4 s have rarely been reported in polymer systems. Here, luminescent compounds with small phosphorescence rate on the order of approximately 10-1 s-1 are designed, ethylene-vinyl alcohol copolymer (EVOH) as polymer matrix and antioxidant 1010 to protect organic triplets are employed, and ultralong phosphorescence lifetime up to 4.6 s under ambient conditions by short-term and low-power excitation are achieved. The resultant materials exhibit high afterglow brightness, long afterglow duration, excellent processability into large area thin films, high transparency and thermal stability, which display promising anticounterfeiting and data encryption functions.
RESUMEN
Triphenylene derivatives are highly investigated for their electronic, supramolecular and photophysical properties, but the direct modification of the central aromatic core is particularly challenging especially in the internal positions 1, 4, 5, 8, 9, and 12. Herein we present an efficient alkylation method of 2,3,6,7,10,11-hexasubstituted triphenylene derivatives leading to tris-alkylated C3-symmetric derivatives in good yields using N-(hydroxymethyl)carboxamide or N-(alkoxylmethyl)carboxamide alkylating agents.
RESUMEN
Two isomeric series of compounds with "inverted" chains' substitution patterns, 7,10-dialkoxy-1,2,3,4-tetrafluoro-6,11-dimethoxytriphenylene and 6,11-dialkoxy-1,2,3,4-tetrafluoro-7,10-dimethoxytriphenylene, labelled respectively p-TPFn and m-TPFn, and two non-fluorinated homologous isomers, 3,6-dibutoxy-2,7-dimethoxytriphenylene and 2,7-dibutoxy-3,6-dimethoxytriphenylene, p-TP4 and m-TP4, respectively, were synthesized in three steps and obtained in good yields by the efficient transition-metal-free, fluoroarene nucleophilic substitution via the reaction of appropriate 2,2'-dilithium biphenylenes with either perfluorobenzene, C6 F6 , to yield p-TPFn and m-TPFn, or o-difluorobenzene, C6 H4 F2 , for p-TP4 and m-TP4, respectively. The single-crystal structures of p-TPF4, m-TPF4 and p-TP4, unequivocally confirmed that the cyclization reactions occurred at the expected positions, and that the fluorinated molecules stack up into columns with short separation, a propitious situation for the emergence of columnar mesophases. The mesomorphous properties were found to be greatly affected by both chains' length and positional isomerism: a Colhex phase is found for p-TPF4 and m-TPF4, but mesomorphism vanishes in p-TPF6, and changes for the isomeric homologs m-TPFn, with the induction for n≥6 of a lamello-columnar phase, LamColrec . As expected, both non-fluorinated compounds are deprived of mesomorphism. These compounds emit blue-violet colour in solution, independently of the chains' substitution pattern, and the absolute fluorescence quantum yields can reach up to 46 %. In thin films, fluorescence is slightly redshifted.
RESUMEN
A complete theoretical analysis using first the simple Hückel model followed by more sophisticated multi-reference calculations on a trinuclear Ni(II) complex (Tp#Ni3 HHTP), bearing the non-innocent bridging ligand HHTP3- , is carried out. The three semiquinone moieties of HHTP3- couple antiferromagnetically and lead to a single unpaired electron localized on one of the moieties. The calculated exchange coupling integrals together with the zero-field parameters allow, when varied within a certain range, reproducing the experimental data. These results are generalized for two similar other trinuclear complexes containing Ni(II) and Cu(II). The electronic structure of HHTP3- turns out to be independent of both the chemical nature and the geometry of the metal ions. We also establish a direct correlation between the geometrical and the electronic structures of the non-innocent ligand that is consistent with the results of calculations. It allows experimentalists to get insight into the magnetic behavior of this type of complexes by an analysis of their X-ray structure.
RESUMEN
Liquid crystalline triphenylene derivatives, TPC1p-n (n = 6, 12, 14, 16) were prepared using p-alkoxycinnamate as the [2+2] photo-cyclization site. TPC1p-n (n = 12, 14, 16) showed Colr phase and gave crescent-shaped or helical fibers after UV-irradiated in liquid paraffin solutions at 90 and 110 °C in the Colr temperature range. The apparent photoreaction products were shown to be thermally reversible, i.e. they dissolved in liquid paraffin at high temperatures and reappeared on cooling, indicating that they were aggregates of oligomerized TPC1p-n. The reaction mechanism was discussed in terms of the structure of the liquid crystalline phase.
RESUMEN
The synthesis of anisotropic colloidal building blocks is essential for their self-assembly into hierarchical materials. Here, a highly efficient stabilizer-assisted liquid-crystallization-driven self-assembly (SA-LCDSA) strategy was developed to achieve monodisperse colloidal polymer rods. This strategy does not require the use of block copolymers, but only homopolymers or random copolymers. The resulting rods have tunable size and aspect ratios, as well as well-defined columnar liquid crystal structures. The integrated triphenylene units enable the rods to exhibit unusual photo-induced fluorescence enhancement and accompanying irradiation memory effect, which, as demonstrated, are attractive for information encryption/decryption of paper documents. In particular, unwanted document decryption during delivery can be examined by fluorescence kinetics. This SA-LCDSA-based approach can be extended to synthesize other functional particles with desired π-molecular units.
RESUMEN
The adsorption of helium or hydrogen on cationic triphenylene (TPL, C18H12), a planar polycyclic aromatic hydrocarbon (PAH) molecule, and of helium on cationic 1,3,5-triphenylbenzene (TPB, C24H18), a propeller-shaped PAH, is studied by a combination of high-resolution mass spectrometry and classical and quantum computational methods. Mass spectra indicate that HenTPL+ complexes are particularly stable if n = 2 or 6, in good agreement with the quantum calculations that show that for these sizes, the helium atoms are strongly localized on either side of the central carbon ring for n = 2 and on either side of the three outer rings for n = 6. Theory suggests that He14TPL+ is also particularly stable, with the helium atoms strongly localized on either side of the central and outer rings plus the vacancies between the outer rings. For HenTPB+, the mass spectra hint at enhanced stability for n = 2, 4 and, possibly, 11. Here, the agreement with theory is less satisfactory, probably because TPB+ is a highly fluxional molecule. In the global energy minimum, the phenyl groups are rotated in the same direction, but when the zero-point harmonic correction is included, a structure with one phenyl group being rotated opposite to the other two becomes lower in energy. The energy barrier between the two isomers is very small, and TPB+ could be in a mixture of symmetric and antisymmetric states, or possibly even vibrationally delocalized.
RESUMEN
The synthesis of triphenylene-fused phosphole oxides has been achieved through two distinct C-H functionalization reactions as key steps. The phosphole ring was constructed by a three-component coupling of 3-(methoxymethoxy)phenylzinc chloride, an alkyne, and dichlorophenylphosphine, involving the regioselective C-H activation of the C2 position of the arylzinc intermediate via 1,4-cobalt migration. The resulting 7-hydroxybenzo[b]phosphole derivative was used for further π-extension through Suzuki-Miyaura couplings and a Scholl reaction, the latter closing the triphenylene ring. The absorption and emission spectra of the thus-synthesized compounds illustrated their nature as hybrids of triphenylene and benzo[b]phosphole.
RESUMEN
On treatment with the catalyst InBr3 , 1,1-difluoroallenes that bear a cyclopentene moiety and an aryl group underwent domino ring assembly in the presence or absence of N-bromosuccinimide or N-iodosuccinimide to afford aryne precursors such as three-ringed ortho-fluoro(halo)phenanthrenes, four-ringed ortho-fluoro(halo)tetraphenes, ortho-fluoro(halo)chrysenes and fluoro[4]helicenes. Metalation of the aryne precursors followed by elimination of the fluoride resulted in the unprecedented systematic generation of arynes bearing π-extended systems. Diels-Alder reactions of these arynes with isobenzofurans afforded the corresponding cycloadducts whose reductive aromatisation in an SnCl2 /HBr system furnished fully aromatised benzotriphenylenes. In addition, oxidative aryl-aryl coupling (the Scholl reaction) of these benzotriphenylenes facilitated the synthesis of 'half HBCs' (hexabenzocoronenes).
RESUMEN
Two-dimensional triphenylene-based metal-organic frameworks (TP-MOFs) attract significant scientific interest due to their long-range order combined with significant electrical conductivity. The deposition of these structures as oriented films is expected to promote their incorporation into diverse optoelectronic devices. However, to date, a controlled deposition strategy applicable for the different members of this MOF family has not been reported yet. Herein, we present the synthesis of highly oriented thin films of TP-MOFs by vapor-assisted conversion (VAC). We targeted the M-CAT-1 series comprising hexahydroxytriphenylene organic ligands and metal-ions such as Ni2+, Co2+, and Cu2+. These planar organic building blocks are connected in-plane to the metal-ions through a square planar node forming extended sheets which undergo self-organization into defined stacks. Highly oriented thin Ni- and Co-CAT-1 films grown on gold substrates feature a high surface coverage with a uniform film topography and thickness ranging from 180 to 200 nm. The inclusion of acid modulators in the synthesis enabled the growth of films with a preferred orientation on quartz and on conductive substrates such as indium-doped tin oxide (ITO). The van der Pauw measurements performed across the M-CAT-1 films revealed high electrical conductivity values of up to 10-3 S cm-1 for both the Ni- and Co-CAT-1 films. Films grown on quartz allowed for a detailed photophysical characterization by means of UV-vis, photoluminescence, and transient absorption spectroscopy. The latter revealed the existence of excited states on a nanosecond time scale, sufficiently long to demonstrate a photoinduced charge generation and extraction in Ni-CAT-1 films. This was achieved by fabricating a basic photovoltaic device with an ITO/Ni-CAT-1/Al architecture, thus establishing this MOF as a photoactive material. Our results point to the intriguing capabilities of these conductive M-CAT-1 materials and an additional scope of applications as photoabsorbers enabled through VAC thin-film synthesis.
RESUMEN
Graphdiyne (GDY) comprises an important class in functional covalent organic nanosheets based on carbon-carbon bond formation, and recent focus has collected in the expansion of its variations. Here we report on the synthesis of a GDY analogue, TP-GDY, which has triphenylene as the aromatic core. Our liquid/liquid interfacial synthesis for GDY ( J. Am. Chem. Soc. 2017, 139, 3145) was modified for hexaethynyltriphenylene monomer to afford a TP-GDY film with a free-standing morphology, a smooth texture, a domain size of >1 mm, and a thickness of 220 nm. Resultant TP-GDY is characterized by series of microscopies, spectroscopies, and thermogravimetric and gas adsorption analyses.
RESUMEN
Use of D3h -symmetrical triphenylene (TRPH) as a substrate for high-temperature radical reactions with C4 F8 I2 under varying conditions resulted in the introduction of four types of fluorinated substituents: ω-C4 F8 H, c-C4 F8 , c-C4 F4 , and c-C4 HF3 . In contrast to the previous work on direct (poly)substitutions with RF groups in polycyclic aromatic hydrocarbons (PAHs), in this work regiospecificity, selectivity, and high yield were achieved for TRPH(C4 F8 ) and TRPH(C4 F8 )3 . New single-crystal structural data for seven compounds combined with literature crystallographic data allowed for the first detailed and precise analysis of the effects of fluorous substituent types, their number, and their position(s) on the TRPH core on the solid-state packing, and more specifically, the degree of π-π overlap between neighboring molecules, which is linked to charge transport properties. Comparison of isostructural partially fluorinated benzotriphenylenes, 2,3-TRPH(C4 F4 ) and 2,3-TRPH(C4 HF3 ), revealed an unexpectedly large (30 %) drop of π-π overlap, when only one fluorine atom was replaced with the hydrogen atom in a C4 F4 moiety. Theoretical and potentially practical implications of this work may include further testing and elaboration of computational methods describing solid-state interactions and predictions of transport properties of organic semiconductors, and further advances in the molecular design of high-performing TRPH-based organic materials and supramolecular architectures for organic optoelectronics.
RESUMEN
C-H activation is a versatile tool for appending aryl groups to aromatic systems. However, heavy demands on multiple catalytic cycle operations and site-selectivity have limited its use for graphene segment synthesis. A Pd-catal- yzed one-step synthesis of functionalized triphenylene frameworks is disclosed, which proceeds by 2- or 4-fold C-H arylation of unactivated benzene derivatives. A Pd2 (dibenzylideneacetone)3 catalytic system, using cyclic diaryliodonium salts as π-extending agents, leads to site-selective inter- and intramolecular tandem arylation sequences. Moreover, N-substituted triphenylenes are applied to a field-effect transistor sensor for rapid, sensitive, and reversible alcohol vapor detection.
RESUMEN
The gelation properties and mode of self-assembly of six asymmetrical hexaether triphenylene derivatives mono-functionalized with carboxylic and primary amine groups were investigated. The presence of a carboxylic and amine group attached to the triphenylene core generated stable, thermo- and pH-sensitive supramolecular π-organogels with a reversible response to both stimuli. In order to understand the gelation process, we studied the effect of the spacer length and found a different gelation scope for the acid and basic derivatives that accounts for a different supramolecular self-assembly. The presence of the basic group on the amino derivatives was used to guide and catalyze the templated in situ sol-gel polymerization of TEOS and allowed us, under controlled hydrolytic conditions, to prepare an entangled fibrillar network of silica nanotubes.
RESUMEN
The presence of Cu in reactions of triphenylene (TRPH) and 1,4-C4 F8 I2 at 360 °C led to regiospecific substitution of TRPH ortho C(ß) atoms to form C4 F8 -containing rings, completely suppressing substitution on C(α) atoms. In addition, Cu caused selective reductive-defluorination/aromatization (RD/A) to form C4 F4 -containing aromatic rings. Without Cu, the reactions of TRPH and 1,4-C4 F8 I2 were not regiospecific and no RD/A was observed. These results, supported by DFT calculations, are the first examples of Cu-promoted 1)â regiospecific perfluoroannulation, 2)â preparative C-F activation, and 3)â RD/A. HPLC-purified products were characterized by X-ray diffraction, low-temperature PES, and (1) H/(19) Fâ NMR.
RESUMEN
In this study, we have synthesized phenyl-substituted triphenylene derivatives, using the Diels-Alder reaction and the Buchwald-Hartwig reaction. To investigate electroluminescence properties of these materials, multilayer organic light-emitting diode (OLED) devices were fabricated with a structure of indium-tin-oxide (ITO) (180 nm)/4,4'-bis(N-(1-naphthyl)-N-phenylamino)biphenyl (NPB) (50 nm)/blue-emitting materials (1-3) (30 nm)/bathophenanthroline (Bphen) (35 nm)/lithium quinolate (Liq) (2 nm)/Al (100 nm). A device using N(2) ,N(2) ,N(11) ,N(11) ,5,6,7-heptaphenyltriphenylene-2,11-diamine (2) exhibited efficient blue emission with luminous, power, and external quantum efficiencies of 0.92 cd/A, 0.67 lm/W, and 1.17% at 20 mA/cm(2) , respectively. The Commission International de L'Éclairage coordinates of this device were (x = 0.15, y = 0.09) at 6.0 V. Copyright © 2015 John Wiley & Sons, Ltd.
Asunto(s)
Diaminas/química , Luz , Color , Diaminas/síntesis química , Luminiscencia , Estructura Molecular , Teoría CuánticaRESUMEN
The luminescence decay of a species in an absorbing medium whose optical thickness changes with time, as occurs with triplet-triplet absorption following excitation cut-off, is studied theoretically and experimentally. A general luminescence decay function based on a distribution of optical thicknesses is presented. A simple decay function previously used empirically is shown to result from an exponential distribution of optical thicknesses. The general approach introduced allows the adequate description of the phosphorescence decays of two polycyclic aromatic hydrocarbons, coronene and triphenylene (normal and perdeuterated forms for both molecules), in polymer films in the presence of excited-state absorption.
RESUMEN
Liquid crystals confined to porous materials often have different critical phenomena and ordering than in the bulk. Through the selection of pore size, structure and guest liquid crystal, these systems could enable a variety of functional materials for applications such as sensors and displays. A recent example of such a system is chiral nematic mesoporous films infiltrated with liquid crystal 4-cyano-4'-n-octylbiphenyl (8CB), which has reversible thermal switching of its optical bandgap. The optical bandgap is lost when the ordered 8CB guests are heated above â¼50 °C, where the 8CB becomes isotropic. In this study, we have used NMR cryoporometry and pulsed-field gradient diffusion measurements to determine the pore sizes and structures of various chiral nematic mesoporous silica and organosilica films. Temperature and orientation-dependent wideline (15)N NMR spectra of films infiltrated with (15)N-labelled 8CB guests show that the ordering of the 8CB mesogens is consistent with an average orientation parallel to the chiral nematic pore axes. Inclusion of a large, orientation-dependent shift was necessary to fit the spectra, probably due to susceptibility differences between the 8CB guests and the organosilica host.