RESUMEN

SUMMARY: Failure to locate a complete canal system affects the prognosis of root canal treatment. A missed root canal is one of the most common reasons for failed root canal treatment. The prevalence of the second mesiobuccal canal in the maxillary second molar is relatively high and has a variety of configurations. Therefore, knowledge of its morphology is required in clinical endodontics. This review presented the canal in terms of its prevalence, classification, anatomical features, and the method for locating the second mesiobuccal canal in the maxillary second molar. Root canal treatment requires knowledge of tooth morphology, appropriate access preparation, and a thorough examination of the tooth's interior. Thus, clinicians should carefully employ various methods for assessing the anatomy of the entire root canal system to prevent failure in locating the second mesiobuccal canal. This canal can be located by modifying the access cavity design and utilizing specific instruments to improve the second mesiobuccal canal system visualization.

La falta de localización de un sistema completo de canal afecta el pronóstico del tratamiento de éste. La omisión de un tratamiento de canal es uno de los motivos más frecuentes por las que el tratamiento de canal fracasa. La prevalencia del segundo canal mesiovestibular en el segundo molar superior es relativamente alta y tiene una variedad de configuraciones. Por tanto, el conocimiento de su morfología es necesario en endodoncia clínica. Esta revisión presentó el canal en términos de su prevalencia, clasificación, características anatómicas y el método para localizar el segundo canal mesiovestibular en el segundo molar superior. El tratamiento de canal requiere conocimiento de la morfología del diente, una preparación adecuada del acceso y un examen exhaustivo del interior del diente. Por lo tanto, los dentistas deben emplear cuidadosamente varios métodos para evaluar la anatomía de todo el sistema de canales radiculares para evitar fallas en la localización del segundo canal mesiovestibular. Este canal se puede localizar modificando el diseño de la cavidad de acceso y utilizando instrumentos específicos para mejorar la visualización del sistema del segundo canal mesiovestibular.

Asunto(s)

RESUMEN

En la región cervicofacial los quistes de los maxilares de origen odontogénico constituyen una afección relativamente importante, los más frecuentes son los quistes radiculares. Se presentó un paciente masculino de 23 años de edad con un quiste radicular residual extenso que ocupaba la zona mandibular posterior izquierda, y acude a consulta estomatológica de la Clínica «Celia Sánchez Manduley» por un aumento de volumen que causa asimetría facial notable de la hemicara izquierda, de tres centímetros de diámetro, indoloro, asintomático, con 6 meses de evolución y consistencia dura; además refiere tratamiento de exodoncia de molar inferior en la zona (37) hace 2 años. Se indicó radiografía periapical y panorámica donde se observó zona radiolúcida bien definida de 35 a 38 con reabsorción de raíz mesial de 38, distal de 36 y movilidad dentaria grado II en ambos dientes. Se realizó exéresis de la lesión cuyo estudio histológico informó un quiste radicular residual.

Jaw cysts of odontogenic origin constitute a relatively important condition in the cervicofacial region, where radicular cysts are the most frequent. We present a 23-year-old male patient who come to "Celia Sánchez Manduley" Dental Clinic with an extensive residual radicular cyst that occupied his left posterior mandibular area and an increase in volume that caused him a notable facial asymmetry in the left side of his face, of three centimeters in diameter, painless, asymptomatic, with 6 months of evolution and hard consistency; he also mentions a lower molar extraction treatment in area (37) 2 years ago. Periapical and panoramic X-rays were indicated where a well-defined radiolucent zone of 35 to 38 was observed with mesial root resorption of 38, distal of 36 and grade II dental mobility in both teeth. Exeresis of the lesion was performed, whose histological study reported a residual radicular cyst.

Asunto(s)

RESUMEN

Purpose: This study compared the accuracy of detection of incomplete vertical root fractures (VRFs) in filled and unfilled teeth on cone-beam computed tomography images with and without a metal artefact reduction (MAR) algorithm. Materials and Methods: Forty single-rooted maxillary premolars were selected and, after endodontic instrumentation, were categorized as unfilled teeth without fractures, filled teeth without fractures, unfilled teeth with fractures, or filled teeth with fractures. Each VRF was artificially created and confirmed by operative microscopy. The teeth were randomly arranged, and images were acquired with and without the MAR algorithm. The images were evaluated with OnDemand software (Cybermed Inc., Seoul, Korea). After training, 2 blinded observers each assessed the images for the presence and absence of VRFs 2 times separated by a 1-week interval. P-values<0.05 were considered to indicate significance. Results: Of the 4 protocols, unfilled teeth analysed with the MAR algorithm had the highest accuracy of incomplete VRF diagnosis (0.65), while unfilled teeth reviewed without MAR were associated with the least accurate diagnosis (0.55). With MAR, an unfilled tooth with an incomplete VRF was 4 times more likely to be identified as having an incomplete VRF than an unfilled tooth without this condition, while without MAR, an unfilled tooth with an incomplete VRF was 2.28 times more likely to be identified as having an incomplete VRF than an unfilled tooth without this condition. Conclusion: The use of the MAR algorithm increased the diagnostic accuracy in the detection of incomplete VRF on images of unfilled teeth.

RESUMEN

Modern immediate titanium implants have two major drawbacks which are the black metal appearance that might be seen through the mucosa and the gap between implant and extraction socket. Immediate anatomical zirconia implants were introduced to match the shape of the extracted root and fill the socket without gaps while still providing better metal-free appearance. Aim: This study aims to investigate success and survival rates of immediate anatomical zirconia implants. Methods: This prospective interventional study was held between 2017 and 2020 in the faculty of dental medicine, Damascus University, Syria. The sample consisted of 27 immediate anatomical zirconia implants in 21 patients from both genders. Implants were designed and manufactured starting from CBCT image and prior to extraction. Specialized software applications were used to modify implant design. Implants went through different processing procedures to make them ready for insertion immediately after tooth extraction. Restorations were made after a minimum period of 3 months, clinical and radiographic follow ups were performed after 10 - 13.5 months from restoring the implants in order to evaluate their success/ survival. Repeated measures ANOVA was used to assess marginal bone loss, t test for probing depth assessment. Results: Immediate anatomical zirconia implants showed success in (n=17) 63% of total cases, satisfactory survival (n=3) 11.1%, compromised survival (n=2) 7.4% and they failed in (n=5) 18.5%. Conclusions: Immediate anatomical zirconia implants had low success/survival rates when compared to conventional immediate implants. Therefore, they cannot be considered as a predictable alternative in their current form

Asunto(s)

RESUMEN

OBJECTIVE: This study assesses the degree of root curvature in patients with non-syndromic cleft lip and/or palate (NSCL/P). DESIGN: Retrospective. Case-control study. SETTING: Root curvature was assessed in lower premolars and molars in 800 panoramic radiographs: 400 from patients with cleft and 400 from healthy control individuals. Root curvature was classified according to its angulation, as well as its apical, medial, or coronal localization. RESULTS: The frequency of mild curvature in the NSCL/P group compared to the control group was higher in premolars especially in the left second premolar in cleft palate (OR: 6.91; 95% CI: 3.23-14.77; P < .0001). The frequency of moderate curvature in molars was significantly higher in the cleft group, with the highest risk in the right first molar in the cleft lip group (OR: 2.74; 95% CI: 1.67-4.52; P < .0001). Inclination was more frequently observed in the apical third of the root in the group with cleft, whereas for the control group, the curvature was more frequent in the medial third. In patients with cleft, the OR of curvature in the apical third was significant in premolars (left lower second premolar: Cleft lip, OR: 1.91; 95% CI: 1.04-3.52; P = .03; right lower second premolar: Cleft lip, OR: 1.91, 95% CI: 1.04-3.50; P = .03, cleft lip and palate, OR: 1.75; 95% CI: 1.12-2.73; P = .01). CONCLUSION: The results of the current study indicate differences in root curvature in patients with non-syndromic cleft lip and/or palate, which should be considered during the dental treatment planning of patients.

RESUMEN

As crescentes demandas dos pacientes pelo tratamento das recessões gengivais trazem à tona questões terapêuticas clinicamente significativas, exigindo dos profissionais constante aperfeiçoamento em técnicas cirúrgicas cada vez menos invasivas e mais previsíveis. OBJETIVO: Comparar duas técnicas para recobrimento radicular em recessões gengivais unitárias, unilaterais, do tipo 1. METODOLOGIA: Este estudo clínico, paralelo, randomizado e duplo cego avaliou indivíduos com recessões gengivais unitárias, unilaterais, do tipo 1 (RT1), submetidos à cirurgia para recobrimento radicular, através da associação do enxerto de tecido conjuntivo subepitelial ao retalho posicionado coronalmente (grupo controle) e técnica de túnel (grupo teste). Os principais parâmetros avaliados foram profundidade de sondagem (PS), sangramento à sondagem (SS), nível clínico de inserção (NCI), recessão gengival (RG), faixa e espessura da mucosa ceratinizada (MC e EG), percentual de recobrimento radicular (RR) e fenótipo gengival (FG), além de fatores centrados no paciente (FCP), como dor pós-operatória, hipersensibilidade dentinária cervical (HSDC), estética, grau de satisfação e a qualidade de vida, intra e intergrupo, ao longo de 06 meses de acompanhamento. Os dados foram analisados estatisticamente através dos testes t emparelhado de Student, teste t para amostras independentes, Qui-quadrado, McNemar, Análise de Variância Split-Plot com pós-teste t de Student (α = 5%). RESULTADOS: 46 indivíduos finalizaram este estudo (controle: 23; teste: 23). O tempo de cirurgia foi maior para o grupo teste (controle: 40min ± 5,6; teste: 51min ± 5,9; p = 0,041). Foram observadas reduções estatisticamente significativas para a RG e ganho significativo do NCI, de MC e de EG na análise intragrupo, em ambos os grupos de tratamento, porém, sem diferenças entre as técnicas. O RR aumentou significativamente nos períodos avaliados, mas não foram observadas diferenças intergrupo (controle: 89,2%; teste: 86,5%; p = 0,069). A análise intragrupo revelou mudança de FG (controle: 95,65%; teste: 91,3%; p < 0,001). Ambos os protocolos de tratamento reduziram dor pós-operatória e HSDC, e proporcionaram melhora na estética, satisfação e na qualidade de vida (p < 0,001), sem diferenças entre as técnicas ao longo do tempo. CONCLUSÃO: Ambos os tratamentos apresentaram eficácia clínica semelhante em termos de recobrimento radicular e melhora dos FCP (AU).

The increasing demands of patients for the treatment of gingival recessions bring up clinically significant therapeutic issues, requiring professionals to constantly improve in less invasive and more predictable surgical techniques. AIM: To compare two root coverage techniques to treat single, unilateral, type 1 gingival recessions. METHOD: This parallel, randomized, doubleblind clinical trial evaluated individuals with single, unilateral, type 1 gingival recessions 1 (RT1), who underwent root coverage procedure with subepithelial connective tissue graft associated to a coronally advanced flap (control group) or a tunnel technique (test group). The main parameters evaluated were probing depth (PD), bleeding on probing (BoP), clinical attachment level (CAL), gingival recession (GR), heigth of keratinized tissue (KTH), gingival thickness (GT), percentage of root coverage (RC) and gingival phenotype (GP), in addition to patient-reported outcome measures (PROMs), such as postoperative pain, cervical dentin hypersensitivity (CDH), esthetics, degree of satisfaction and quality of life, intra and intergroup, throughout 06 months follow-up. Data were statistically analyzed using paired Student t-test, t-test for independent samples, Chi-square, McNemar, Split-Plot Analysis of Variance with post hoc t-test (α = 5%). RESULTS: 46 subjects completed this study (control: 23; test: 23). Surgery time was longer for the test group (control: 40min ± 5.6; test: 51min ± 5.9; p = 0.041). Statistically significant reductions for GR and significant gain for CAL, KTH and GT were observed in the intragroup analysis, in both treatment groups, however, without differences between techniques. The CR increased significantly, but no intergroup differences were observed (control: 89.2%; test: 86.5%; p = 0.069). Intragroup analysis revealed a change in GP (control: 95.65%; test: 91.3%; p < 0.001). Both treatment protocols reduced postoperative pain and CDH and improved esthetics, satisfaction and quality of life (p < 0.001), with no differences between the techniques over time. CONCLUSION: Both treatments showed similar clinical efficacy in terms of root coverage and improvement in PROMs (AU).

Asunto(s)

RESUMEN

BACKGROUND: Extracted human teeth are used to simulate dental procedures and are essential for practical education and research studies. OBJECTIVES: The aim of this study was to evaluate the efficacy of different sterilization methods for extracted human roots and to assess the effects of these methods on dentin microhardness. MATERIAL AND METHODS: The crowns of 40 mandibular incisors were removed. The roots were sectioned at 10 mm and divided into 4 groups (n = 10 per group): G1 - no sterilization (control); G2 - microwave radiation (650 W, 5 min); G3 - ethylene oxide (288°C, 3 h); and G4 - autoclave (121°C, 15 min). The roots were immersed in brain heart infusion (BHI) and incubated at 37°C in variable oxygen atmospheres. After 14 days, the samples were assessed for turbidity. Three slices were obtained from each root, and indentations were made at 30, 60 and 120 µm from the root canal lumen. The microbiological data was analyzed with the Kruskal-Wallis test and Dunn's post-hoc test. Microhardness was evaluated by means of the twoway analysis of variance (ANOVA) and Tukey's test (p < 0.05). RESULTS: The roots submitted to autoclaving were 100% sterile, which differed from the other methods (p < 0.05); the control specimens had 0% sterility. For microhardness, significant differences were found between the methods, particularly for the apical third (68.06 ±12.50) (p < 0.05). CONCLUSIONS: Although all the evaluated techniques reduced dentin microhardness, autoclaving should be used as the most reliable method of sterilization of extracted dental roots.

Asunto(s)

RESUMEN

The aim of this study was to determine prevalence and describe the clinical and radiographic findings of three-rooted primary mandibular first and second molars in a Mexican population. Intraoral periapical radiograph, orthopantomogram or cone beam computed tomography (CBCT) were obtained. A total 2284 children from the state of Puebla, Mexico were examined, of whom 20 presented an anatomic variant in tooth crown shape. Of the total teeth with crown alterations, 10 first and 5 second primary mandibular molars were found to have supernumerary roots. In one case, it was possible to obtain micro-CT images. The study recorded prevalence, unilateral or bilateral occurrence, and ratio between sexes. Data were analyzed using descriptive statistics. Clinical findings were presence of an anatomical variation (tuberculum paramolare / right and/or left cervical convexity) in primary mandibular first molars. Second molars presented conventional crown morphology. Prevalence of three-rooted primary mandibular first and second molars was 0.44% and 0.22%, respectively. Male: female ratio for presence of threerooted primary mandibular first molars was 4:1, showing genetic predisposition in males, and for second molars it was 1.5:1, with no predisposition according to sex. The clinical and radiographic anatomical variants in primary molars should be considered by pediatric dentists during routine care because they may cause difficulties in restorations.

El objetivo de este estudio fue determinar la prevalencia, así como los hallazgos clínicos y radiográficos de los primeros y segundos molares primarios mandibulares con tres raíces en una población mexicana. Se obtuvieron radiografías periapicales intraorales, ortopantomografía o tomografía computarizada de haz cónico (TCHC). Fueron revisados en total 2284 niños originarios del estado de Puebla, México, de los cuales 20 sujetos presentaron una variante anatómica en la forma de la corona dental. En el total de dientes con alteraciones coronarias, se encontraron 10 primeros y 5 segundos molares primarios mandibulares con raíces supernumerarias. En un caso fue posible la obtención de imágenes de micro tomografía computarizada (micro-CT). Fueron registradas la prevalencia, la ocurrencia uni o bilateral y la relación entre sexos. Los datos se analizaron mediante estadística descriptiva. Los hallazgos clínicos fueron: presencia de una variación anatómica (tuberculum paramolare / convexidad cervical derecha y/o izquierda) en los primeros molares primarios mandibulares. Los segundos molares presentaron una morfología coronal convencional. Entre los hallazgos radiográficos, fue común encontrar un conducto en cada raíz. La prevalencia fue de 0,44% y 0,22% para los primeros y segundos molares primarios mandibulares con tres raíces, respectivamente. La relación por sexo en los primeros molares primarios mandibulares con tres raíces fue de 4:1, indicando una predisposición genética para el sexo masculino, mientras que, en los segundos molares, la razón fue de 1,5:1 sin predisposición por sexo. Las variantes anatómicas clínicas y radiográficas presentes en los molares primarios deben ser tomadas en cuenta por los odontopediatras durante su rutina de atención, ya que pueden ocasionar dificultades para la restauración.

Asunto(s)

RESUMEN

Introdução: Alterações morfológicas na cavidade pulpar e na anatomia radicular podem constituir um desafio ao tratamento endodôntico. A dilaceração pode ser resultado de trauma na dentição decídua, na época da formação das raízes, provocando acentuada curvatura da raiz ou da coroa em um dente permanente. Objetivo: O presente relato de caso teve por objetivo descrever o tratamento endodôntico de um dente #41 com acentuada dilaceração radicular. Radiograficamente, a região periapical do dente #41 mostrou extensa área radiolúcida, sugestiva de osteólise periapical em decorrência de necrose pulpar, que foi confirmada pela ausência de resposta aos testes pulpares. O tratamento endodôntico foi realizado. Conclusão: Após 90 meses de acompanhamento, constatou-se ausência de sinais ou sintomas, e o exame radiográfico forneceu evidências de cicatrização óssea periapical (AU).

Introduction: The morphological changes in the pulp cavity and root anatomy can lead to difficulties in carrying out endodontic treatment. Dilaceration can be the result of trauma in primary dentition, in the root formation phase, provoking accentuated root or crown curvature in a permanent tooth. Objective: The present case report aimed to describe the endodontic treatment of tooth 41 with accentuated root laceration. Radiographically, the periapical region of tooth #41 showed an extensive radiolucent area, suggestive of periapical osteolysis due to pulp necrosis, which was confirmed by the lack of response and pulp tests. Endodontic treatment was realized. Conclusion: The follow-up at 90 months showed no signs or symptoms, and the radiographic examination provided evidence of periapical bone healing.

Asunto(s)

RESUMEN

INTRODUCTION: This study evaluated the performance of the metal artifact reduction (MAR) tool in cone-beam computed tomographic scans using different fields of view (FOVs) in the detection of a root isthmus in mandibular molars with intraradicular posts. METHODS: Twenty-eight teeth were scanned by micro-computed tomographic imaging (gold standard images). Thereafter, specimens were allocated into the following groups: gutta-percha (teeth without posts, n = 10), a prefabricated metal post (n = 9), and a fiberglass post (n = 9). Cone-beam computed tomographic scans were taken using 8 acquisition protocols, varying the size of the FOV (10 × 5.5 cm and 5 × 5.5 cm) and the MAR tool (disabled, low, normal, and high modes). A root isthmus was evaluated considering a 5-point scale. Data were analyzed considering a 5% significance level. RESULTS: Intra- and interexaminer agreement varied from moderate to substantial. The frequency of correct diagnosis varied significantly in all groups regardless of the image acquisition protocol selected (P < .05). In the gutta-percha group, there was no difference in the accuracy, sensitivity, and specificity values between the tested protocols. In the metal and fiberglass post groups, the accuracy values were higher with the "disabled" and "low" modes of the MAR tool regardless of the FOV size. This was also observed for the sensitivity values in the metal post group (P < .05). CONCLUSIONS: The size of the FOV did not affect the performance of the MAR tool in the diagnosis of a root isthmus in molars with intraradicular posts. Our findings suggest that the use of the tool in the "normal" and "high" modes is contraindicated for this purpose.

Asunto(s)

RESUMEN

ABSTRACT The aim of this study was to determine prevalence and describe the clinical and radiographic findings of three-rooted primary mandibular first and second molars in a Mexican population. Intraoral periapical radiograph, orthopantomogram or cone beam computed tomography (CBCT) were obtained. A total 2284 children from the state of Puebla, Mexico were examined, of whom 20 presented an anatomic variant in tooth crown shape. Of the total teeth with crown alterations, 10 first and 5 second primary mandibular molars were found to have supernumerary roots. In one case, it was possible to obtain micro-CT images. The study recorded prevalence, unilateral or bilateral occurrence, and ratio between sexes. Data were analyzed using descriptive statistics. Clinical findings were presence of an anatomical variation (tuberculum paramolare / right and/or left cervical convexity) in primary mandibular first molars. Second molars presented conventional crown morphology. Prevalence of three-rooted primary mandibular first and second molars was 0.44% and 0.22%, respectively. Male: female ratio for presence of threerooted primary mandibular first molars was 4:1, showing genetic predisposition in males, and for second molars it was 1.5:1, with no predisposition according to sex. The clinical and radiographic anatomical variants in primary molars should be considered by pediatric dentists during routine care because they may cause difficulties in restorations.

RESUMEN El objetivo de este estudio fue determinar la prevalencia, así como los hallazgos clínicos y radiográficos de los primeros y segundos molares primarios mandibulares con tres raíces en una población mexicana. Se obtuvieron radiografías periapicales intraorales, ortopantomografía o tomografía computarizada de haz cónico (TCHC). Fueron revisados en total 2284 niños originarios del estado de Puebla, México, de los cuales 20 sujetos presentaron una variante anatómica en la forma de la corona dental. En el total de dientes con alteraciones coronarias, se encontraron 10 primeros y 5 segundos molares primarios mandibulares con raíces supernumerarias. En un caso fue posible la obtención de imágenes de micro tomografía computarizada (micro-CT). Fueron registradas la prevalencia, la ocurrencia uni o bilateral y la relación entre sexos. Los datos se analizaron mediante estadística descriptiva. Los hallazgos clínicos fueron: presencia de una variación anatómica (tuberculum paramolare / convexidad cervical derecha y/o izquierda) en los primeros molares primarios mandibulares. Los segundos molares presentaron una morfología coronal convencional. Entre los hallazgos radiográficos, fue común encontrar un conducto en cada raíz. La prevalencia fue de 0,44% y 0,22% para los primeros y segundos molares primarios mandibulares con tres raíces, respectivamente. La relación por sexo en los primeros molares primarios mandibulares con tres raíces fue de 4:1, indicando una predisposición genética para el sexo masculino, mientras que, en los segundos molares, la razón fue de 1,5:1 sin predisposición por sexo. Las variantes anatómicas clínicas y radiográficas presentes en los molares primarios deben ser tomadas en cuenta por los odontopediatras durante su rutina de atención, ya que pueden ocasionar dificultades para la restauración.

RESUMEN

A limpeza dos canais radiculares se apresenta como uma etapa crucial para o sucesso do tratamento endodôntico. Por essa razão, a busca por soluções irrigadoras eficazes na terapia endodôntica de dentes decíduos é frequente nas pesquisas e demonstra a necessidade de encontrar substâncias com menor toxicidade e maior eficiência. Sendo assim, o objetivo do presente estudo é analisar as diferentes soluções e protocolos de irrigação no tratamento endodôntico de dentes decíduos, a fim de construir uma conduta clínica. Para isso, foi realizada uma busca na literatura nas bases de dados PubMed/MEDLINE, Cochrane Library, SCIELO, Portal de Periódicos CAPES e BVS utilizando a combinação dos termos "deciduous tooth", "root canal irrigants", "pulpectomy" e seus derivados, associados entre si pelo operador booleano "AND" e adaptados para cada base de dados. As buscas foram realizadas no período de Julho à Agosto de 2020. Foi encontrado o total de 192 resultados. Após uma leitura crítica, foram selecionados 8 estudos. A revisão incluiu estudos que abordassem as soluções irrigantes mais usuais: hipoclorito de sódio, digluconato de clorexidina, ácido cítrico e ácido etilenodiaminotetracético (EDTA) na terapia endodôntica de dentes decíduos. O EDTA e digluconato de clorexidina apresentam baixa toxicidade e o hipoclorito de sódio 1% combinado com ácido cítrico 6% apresentam a combinação mais próspera. A associação das duas substâncias mostrou ser mais eficiente na limpeza dos canais radiculares e na remoção da smear layer. Porém, mais estudos são necessários, principalmente clínicos, para confirmação do melhor protocolo de irrigação para o tratamento endodôntico de dentes decíduos.

Cleaning of root canals is a crucial step for a successful endodontic treatment. For this reason, the search for effective irrigating solutions in endodontic therapy of deciduous teeth is frequent in research and it demonstrates the need to find substances with lower toxicity and greater efficiency. Thus, this study aims to analyze the different irrigating solutions and protocols in the endodontic treatment of deciduous teeth, in order to build a clinical approach. For this, a literature search was performed in the Databases PubMed/ MEDLINE, Cochrane Library, SCIELO, Portal de Periódicos CAPES and VHL using the combination of the terms "deciduous tooth," "root canal irrigants," "pulpectomy" and their derivatives, associated with each other by the Boolean operator "AND" and adapted for each database. The searches were carried out from July to August 2020. In total, 192 results were found. After a critical reading, eight studies were selected. The review included studies addressing the most common irrigating solutions: sodium hypochlorite, chlorhexidine digluconate, citric acid, and ethylenediaminetetraacetic acid (EDTA) in endodontic therapy of deciduous teeth. EDTA and chlorhexidine digluconate have low toxicity and the 1% sodium hypochlorite combined with 6% citric acid have the most prosperous combination. The association of these two substances proved to be more efficient in cleaning root canals and removing the smear layer. However, more studies are necessary, mainly clinical ones, to confirm the best irrigating protocol for the endodontic treatment of deciduous teeth.

RESUMEN

OBJECTIVES: Limited long-term data are available when comparing the esthetic outcomes of coronally advanced flap (CAF) with or without a connective tissue graft (CTG). The aim of this study was to compare the 4-year esthetic outcomes of CAF vs CAF + CTG for the treatment of isolated maxillary gingival recessions. MATERIAL AND METHODS: Forty-eight patients were randomly assigned for treatment either with CAF (control; N = 24) or to CAF + CTG (test group; N = 24). Patients were followed after the surgery until the final evaluation. A professional esthetic evaluation was performed using the Root coverage Esthetic Score (RES). Recession reduction, mean root coverage, and complete root coverage were also evaluated. RESULTS: Forty-two patients completed the study at the 4-year recall. A significant recession reduction was evident at 4 years, without significant intergroup differences. The CAF group showed a statistically significant higher final RES compared with the CAF + CTG group (9.14 ± 1.08 vs 7.25 ± 1.29, respectively, p < 0.001). Regarding the individual components of RES, gingival margin and marginal tissue contour were significantly higher in the CAF group compared with that in the CAF + CTG group. CONCLUSIONS: CAF presented with a significantly higher overall esthetic score than CAF + CTG, and in the individual RES components of marginal tissue contour and gingival margin after 4 years. CLINICAL RELEVANCE: CAF without the addition of CTG provided higher esthetic outcomes for the treatment of isolated gingival recessions.

Asunto(s)

RESUMEN

Abstract The presence of a tooth-surface defect, such as a non-carious cervical lesion (NCCL), associated with sites of gingival recession (GR) defects creates a combined soft tissue/tooth defect (CD) that requires a different treatment plan. This study aimed to critically review the literature regarding the available treatment protocols for CDs and suggest a new decision-making process. NCCLs were classified as Class A-: the cementoenamel junction (CEJ) was visible and the root surface discrepancy was < 0.5 mm (no step); Class A+: CEJ was visible and the root surface discrepancy was > 0.5 mm (with a step); Class B-: unidentifiable CEJ without a step; Class B+: unidentifiable CEJ with a step. NCCLs affecting both root and crown surfaces (Class B) lead to CEJ destruction and consequently eliminate an important landmark used before and after root coverage procedures. The depth of the root surface discrepancy is vital owing to its possible impact on soft tissue adaptation after healing, which, in turn, may influence the treatment options, namely the use of graft and/or composites to compensate for the discrepancy. Clinically, a step with horizontal depth greater than 0.5 mm should be recognized as the minimum threshold value to define this condition. Extremely deep defects tend to assume a V-shaped topography. Therefore, extremely deep V-shaped defects were classified into subclasses A+V, a V-shaped defect, and B+V, a V-shaped defect with loss of CEJ, for management considerations. The treatment options, supported by the literature, and a decision-making process to deal with each condition are presented.

RESUMEN

Objetivo: Comparar o aumento percentual da área da secção reta transversal de canais radiculares, no nível de 3 mm aquém do ápice radicular, após instrumentação com dois sistemas de instrumento único. Métodos: Dezenove primeiros molares inferiores extraídos tiveram as raízes mesiais seccionadas no nível de 3 mm aquém do ápice radicular, sendo os 2 milímetros finais de cada raiz removidos e descartados, para proceder a mensuração da área pré-operatória, através de estereomicroscopia. As raízes foram instrumentadas com os sistemas SAF e Reciproc R25.08 e procedeu-se nova mensuração para comparação do aumento percentual da área. O aumento percentual da área da secção reta transversal foi comparado e analisado estatisticamente pelo teste t de Student. O nível de significância foi estabelecido em 5% (p < 0,05). Resultados: O aumento percentual da área dos canais foi significativamente maior para o grupo Reciproc (p = 0,001) em comparação com o grupo SAF. Os canais instrumentados com o sistema SAF tiveram sua área aumentada em média 53,5%, enquanto que nos instrumentados com o sistema Reciproc a média foi 154,5%. Conclusão: O sistema Reciproc proporcionou um aumento percentual da área da secção reta transversal dos canais radiculares, no nível dos 3 mm apicais, 3 vezes maior que o sistema SAF.

Aim: To compare the percentage increase in the cross-sectional area of root canals, at the level of 3 mm from the root apex after instrumentation with two single instrument systems. Methods: The roots of 19 extracted mandibular first molars were sectioned 3 mm short of the apex level, with the final 2 millimeters of each root removed and discarded in order to enable the preoperative area to be measured by stereomicroscopy. Subsequently, the roots were instrumented with the SAF and Reciproc 25/.08 systems, alternating the technique used per canal from root to root, and a new measurement was performed. After, the percentage increase in area was calculated considering the values of the original and the final area. The Student'st-test was applied to the results, with a level of significance set at 5%. Results: The percentage increase in area of the root canals was significantly higher for the Reciproc (p = 0.001) when compared to the SAF group. In the canals instrumented with the SAF system, the mean increase in area was 53.5%, while in those using the Reciproc system, it was 154.5%. Conclusion:The Reciproc system produced a 3-fold higher percentage increase in the cross-sectional area of the root canals at the level of 3 mm from the root apex than did the SAF system.

Asunto(s)

RESUMEN

INTRODUCTION: This study aimed to evaluate (1) the effect of irrigating solutions and intracanal medicaments on the release of transforming growth factor beta 1 (TGF-ß1) and vascular endothelial growth factor (VEGF) from cervical root dentin and (2) the effect of associating triple antibiotic paste (TAP) and calcium hydroxide paste (CH) with 2% chlorhexidine (CHX) on TGF-ß1 release. METHODS: First, 119 specimens from roots (cervical thirds) were obtained and were distributed into 5 groups: 2% CHX, 2.5% sodium hypochlorite, TAP, CH, and 10% EDTA by each growth factor (TGF-ß1 [n = 8] and VEGF [n = 8]). Then, specimens were distributed as follows (n = 13): TAP + 2% CHX, CH + 2% CHX, and 10% EDTA and treated with irrigating solutions and intracanal medicaments. After the treatments, the specimens were immersed in 10% EDTA (20 minutes), and the solution was analyzed using the enzyme-linked immunosorbent assay. The data were submitted to normality, homogeneity of variance, and Mann-Whitney tests (P < .05). RESULTS: Significant differences were found between the irrigating solutions (P < .05) and intracanal medicaments for TGF-ß1 (P < .05). No VEGF release was detected for any group. Our results showed no significant differences among the TAP + 2% CHX and EDTA groups for TGF-ß1 but a significant difference between CH + 2% CHX and the other groups (P < .05). CONCLUSIONS: The use of 2% CHX as the irrigating solution, CH as the intracanal medicament, and 10% EDTA as the final irrigation provides higher TGF-ß1 release from the cervical root dentin, whereas VEGF was not detected. Moreover, TAP and 2% CHX with 10% EDTA as the final irrigation resulted in greater TGF-ß1 release from cervical root dentin than CH + 2% CHX.

Asunto(s)

RESUMEN

INTRODUCTION: The aim of this study was to assess 2 cone-beam computed tomographic systems on the detection of artificially induced vertical root fractures (VRFs) and artifact intensity using birooted teeth restored with different intracanal materials. METHODS: The sample consisted of 20 extracted birooted premolars. Root fracture was induced in half of the sample. Seven intracanal material combinations were used in each tooth, 1 at a time: unrestored, gutta-percha, a buccal root with gutta-percha and a lingual root with a fiberglass post, a buccal root with gutta-percha and a lingual root with a metal core fiberglass post, fiberglass posts, metal core fiberglass posts, and NiCr posts. Cone-beam computed tomographic scans were acquired using CS 9000 3D (Carestream Dental Rochester, NY) and OP300 (Instrumentarium Dental Inc, Tuusula, Finland) units. Exposure parameters were fixed at 90 kV and 8 mA. The voxel size and field of view were set at 0.085 mm and 5 × 5 cm for OP300 and 0.076 mm and 5 × 3.75 cm for CS 9000, respectively. Two observers assessed all images using a 5-point confidence scale for VRF detection and a 4-point score for artifact interference. The sensitivity, specificity, accuracy, and area under the receiver operating characteristic curve were compared using 2-way analysis of variance and the Tukey test (α = 0.05). Artifact interference was evaluated by descriptive statistics and the chi-square test. RESULTS: There were significant differences between scanners (P > .05) and among the different intracanal material groups (OP300) (P < .05) for specificity. When a metal post was present in both roots, severe artifact interference was observed in all images. CONCLUSIONS: CS 9000 3D presented better performance than OP300 on VRF detection of endodontically treated teeth. Unrestored teeth and teeth filled with fiberglass posts were considered the groups with the lowest artifact interference and the highest VRF detection results.

Asunto(s)

RESUMEN

Abstract Objectives This study assessed the incidence and variability features of root canals system (RCS) and their ramifications according to Pucci & Reig (PR) (1944) and the American Association of Endodontists (AAE) (2017) by micro-computed tomography (μCT). Methodology 500 representative extracted human teeth of each tooth group (n=50) (maxillary/mandibular central and lateral incisors, canines, first and second premolars and molars) were scanned by μCT with a resolution of 26.70 μm. The reconstructed cross-sections images and the visualization of the continuous slices in the transversal axis were performed using DataViewer software. RCS were classified according to Pucci & Reig (main canal, collateral canal, lateral canal, secondary canal, accessory canal, intercanal, recurrent canal) and AAE (main canal, accessory canal, lateral canal). The apical deltas were assessed for both classifications. The prevalence of apical deltas was evaluated using the Chi-squared test (p<0.05). Results According to PR, a higher incidence of lateral canals was observed in maxillary canines (10%), central incisors (8%) and first premolars (6%). Using AAE, the highest incidence of lateral canals was observed in the mandibular first premolars (85%), first and second molars (84%), lateral incisors (67%), canines (59%), and in maxillary first premolars (52%). Regarding accessory canals, the PR showed a frequency in 2% of the maxillary lateral incisors and maxillary and mandibular first premolars and 3% of mandibular first and second molars. On the other hand, the AAE showed the highest incidence of accessory canals in 86% of the maxillary first premolars, 71% in mandibular lateral incisors, 69% in mandibular first premolars, 65% in mandibular canines, and 56% in maxillary canines. The PR showed the lowest incidence of apical deltas for all dental groups when compared with AAE (p=0.004). Interestingly, distal canals in maxillary molars showed a significant discrepancy between classifications (p=0.027). Conclusions μCT enabled accurately describing the RC system and related ramifications, adding to the PR and AAE classifications, with some discrepancies reported for maxillary molars. Clinical Relevance This μCT study enabled a thorough description of the variability among root canals and their ramifications, including clinically relevant details on the presence and location of lateral canals and accessories in all human tooth groups, beyond the currently existing classification systems.

Asunto(s)

RESUMEN

OBJECTIVES: This study evaluated the bond strength of various fiberglass post cementation techniques using different resin-based composites. MATERIALS AND METHODS: The roots from a total of 100 bovine incisors were randomly assigned to 5 treatment groups: G1, post + Scotchbond Multi-Purpose (SBMP) + RelyX ARC luting agent; G2, relined post (Filtek Z250) + SBMP + RelyX ARC; G3, individualized post (Filtek Z250) + SBMP; G4, individualized post (Filtek Bulk-Fill) + SBMP; G5, individualized post (Filtek Bulk-Fill Flow) + SBMP. The samples were subjected to the push-out (n = 10) and pull-out (n = 10) bond strength tests. Data from the push-out bond strength test were analyzed using 2-way analysis of variance (ANOVA) with the Bonferroni post hoc test, and data from the pull-out bond strength test were analyzed using 1-way ANOVA. RESULTS: The data for push-out bond strength presented higher values for G2 and G5, mainly in the cervical and middle thirds, and the data from the apical third showed a lower mean push-out bond strength in all groups. No significant difference was noted for pull-out bond strength among all groups. The most frequent failure modes observed were adhesive failure between dentine and resin and mixed failure. CONCLUSIONS: Fiberglass post cementation using restorative and flowable bulk-fill composites with the individualization technique may be a promising alternative to existing methods of post cementation.

RESUMEN

The aim of this study was to evaluate the clinical utility of Cone Beam Computed Tomography (CBCT) in cases of medium and high endodontic complexity. The relevance of CBCT to define treatment was evaluated through the Wittenberg questionnaire and the variation in treatment plans after CBCT exam analysis. The sample (n=40) was chosen for convenience over a period of 4 months. It considered the current recommendations to request CBCT exams before performing root canal treatments. Data collection was carried out through a survey applied to the treating clinicians, after examining the information obtained by the CBCT system. Data were analyzed with the Stata version 13 software, and the Chi-square test was used for inferential analysis. A 95% confidence interval was considered. The most frequent dental groups corresponded to upper posterior and upper anterior teeth (47.5% and 30.0%); the cases were equally distributed according to complexity (50% and 50%). The main reason for requesting CBCT exams corresponded to complex anatomy and/or atypical canal system (37.5%). The use of CBCT increased confidence in the initial treatment chosen by clinicians in 50% of cases according to the Wittenberg questionnaire, and a 45% variation in treatment plans was observed. There was no statistical relationship between complexity and the variables studied. CBCT contributed greatly to the therapeutic management of cases regardless of their complexity.

El objetivo de este estudio fue evaluar la utilidad clínica de la Tomografía Computarizada Cone Beam (CBCT) en casos de mediana y alta complejidad endodóntica. Se midió la relevancia del CBCT para definir conducta terapéutica a través del cuestionario de Wittenberg y en la variación de los planes de tratamientos posterior al análisis del examen. La muestra (n=40) se eligió por conveniencia en un período de 4 meses, considerando las recomendaciones actuales para solicitar este examen en Endodoncia. La recolección de datos se realizó por medio de una encuesta aplicada a los clínicos tratantes, después de examinar la información obtenida por el CBCT. Los datos se analizaron a través del software Stata version 13 y para el análisis inferencial se utilizó la prueba de chi cuadrado. Se utilizó un intervalo de confianza de 95%. Los grupos dentarios más frecuentes correspondieron a posteriores y anteriores superiores (47,5% y 30,0%), los casos se distribuyeron igualitariamente según complejidad (50% y 50%), el motivo principal para solicitar el CBCT, correspondió a anatomía del sistema de conductos de carácter complejo y/o atípico (37,5%), el CBCT aumentó la confianza en el tratamiento inicial escogido por los clínicos en el 50% de los casos según el cuestionario de Wittenberg y se obtuvo un 45% de variación en los planes de tratamientos. No se apreció relación estadística entre la complejidad con las variables estudiadas. El CBCT aportó en gran medida el manejo terapéutico de los casos independiente de su complejidad.

Asunto(s)