RESUMEN

Syntrophy achieved via microbial cooperation is vital for anaerobic hydrocarbon degradation and methanogenesis. However, limited understanding of the metabolic division of labor and electronic interactions in electro-stimulated microbiota has impeded the development of enhanced biotechnologies for degrading hydrocarbons to methane. Here, compared to the non-electro-stimulated methanogenic toluene-degrading microbiota, electro-stimulation at 800 mV promoted toluene degradation and methane production efficiencies by 11.49 %-14.76 % and 75.58 %-290.11 %, respectively. Hydrocarbon-degrading gene bamA amplification and metagenomic sequencing analyses revealed that f_Syntrophobacteraceae MAG116 may act as a toluene degrader in the non-electro-stimulated microbiota, which was proposed to establish electron syntrophy with the acetoclastic methanogen Methanosarcina spp. (or Methanothrix sp.) through e-pili or shared acetate. In the electro-stimulated microbiota, 37.22 ± 4.33 % of Desulfoprunum sp. (affiliated f_Desulfurivibrionaceae MAG10) and 58.82 ± 3.74 % of the hydrogenotrophic methanogen Methanobacterium sp. MAG74 were specifically recruited to the anode and cathode, respectively. The potential electrogen f_Desulfurivibrionaceae MAG10 engaged in interspecies electron transfer with both syntroph f_Syntrophobacteraceae MAG116 and the anode, which might be facilitated by c-type cytochromes (e.g., ImcH, OmcT, and PilZ). Moreover, upon capturing electrons from the external circuit, the hydrogen-producing electrotroph Aminidesulfovibrio sp. MAG60 could share electrons and hydrogen with the methanogen Methanobacterium sp. MAG74, which uniquely harbored hydrogenase genes ehaA-R and ehbA-P. This study elucidates the microbial interaction mechanisms underlying the enhanced metabolic efficiency of the electro-stimulated methanogenic toluene-degrading microbiota, and emphasizes the significance of metabolic and electron syntrophic interactions in maintaining the stability of microbial community functionality.

Asunto(s)

RESUMEN

Rapid industrial growth and urbanization have resulted in a significant rise in environmental pollution issues, particularly indoor air pollutants. As a result, it is crucial to design and develop technologies and/or catalysts that are not only cost-effective but also promising high performance and practical applicability. However, achieving this goal has been so far remained a challenging task. Herein, a series of transition metal M - TiO2 (M = W, Fe, Mn) nanocrystals was prepared for photocatalytic degradation of volatile organic compounds (VOCs), i.e., toluene. Of the nanocomposites tested, W-TiO2 showed significantly improved photocatalytic activity for VOC degradation under UV irradiation compared to the others. In particular, the optimized W dopant amount of 0.5 wt% resulted in the outstanding degradation performance of toluene (96%) for the obtained W-TiO2(0.5%) nanocomposite. Moreover, W-TiO2(0.5%) nanocomposite exhibited good stability for 32 h working under high toluene concentration (10 ppm) compared to the pristine TiO2. The current work demonstrates the potential usage of M - TiO2 nanocrystals, particularly W-TiO2(0.5%), as a promising photocatalyst for efficient VOCs degradation.

Asunto(s)

RESUMEN

(R)-Benzylsuccinate is generated in anaerobic toluene degradation by the radical addition of toluene to fumarate and further degraded to benzoyl-CoA by a ß-oxidation pathway. Using metabolic modules for benzoate transport and activation to benzoyl-CoA and the enzymes of benzylsuccinate ß-oxidation, we established an artificial pathway for benzylsuccinate production in Escherichia coli, which is based on its degradation pathway running in reverse. Benzoate is supplied to the medium but needs to be converted to benzoyl-CoA by an uptake transporter and a benzoate-CoA ligase or CoA-transferase. In contrast, the second substrate succinate is endogenously produced from glucose under anaerobic conditions, and the constructed pathway includes a succinyl-CoA:benzylsuccinate CoA-transferase that activates it to the CoA-thioester. We present first evidence for the feasibility of this pathway and explore product yields under different growth conditions. Compared to aerobic cultures, the product yield increased more than 1000-fold in anaerobic glucose-fermenting cultures and showed further improvement under fumarate-respiring conditions. An important bottleneck to overcome appears to be product excretion, based on much higher recorded intracellular concentrations of benzylsuccinate, compared to those excreted. While no export system is known for benzylsuccinate, we observed an increased product yield after adding an unspecific mechanosensitive channel to the constructed pathway.

Asunto(s)

RESUMEN

Vacuum ultraviolet (VUV) photolysis is a facile method for volatile organic compounds (VOCs) elimination, but is greatly limited by the relatively low removal efficiency and the possible secondary pollution. To overcome above drawbacks, we developed an efficient method for VOCs elimination via VUV photolysis coupled with wet scrubbing process. In this coupled process, volatile toluene, a representative of VOCs, was oxidized by the gas-phase VUV photolysis, and then scrubbed into water for further oxidation by the liquid-phase VUV photolysis. More than 96% of toluene was efficiently removed by this coupled process, which was 2 times higher than that in the gas-phase VUV photolysis. This improvement was attributed to the synergistic effect between gas-phase and liquid-phase VUV photolysis. O3 and HO• are the predomination reactive species for the toluene degradation in this coupled process, and the generation of O3 in gas-phase VUV photolysis can efficiently enhance the HO• production in liquid-phase VUV photolysis. The result from in-situ proton transfer reaction ionization with mass analyzer (PTR-MS) further suggested that most intermediates were trapped by the wet scrubbing process and efficiently oxidized by the liquid-phase VUV photolysis, showing a high performance for controlling the secondary pollution. Furthermore, the result of stability test and the reuse of solution demonstrated that this coupled process has a highly stable and sustainable performance for toluene degradation. This study presents an environmentally benign and highly efficient VUV photolysis for gaseous VOCs removal in the wet scrubbing process.

Asunto(s)

RESUMEN

Crystal defect is well-known to have a significant effect on the photocatalytic performance of semiconductors. Herein, defect-rich and -poor BaSn(OH)6 (BSOH-Sn and BSOH-Ba) photocatalysts were synthesized by exchanging the addition order of Ba and Sn. Results show that the defect-poor BSOH-Ba exhibited more efficient toluene degradation under ultraviolet (UV) light, which could attribute to the great suppression of photogenerated electron-hole (e--h+) pairs recombination by tuning the defect concentration. The low defect concentration in BSOH-Ba finally promotes the charge separation efficiency, the generation of reactive oxygen species (ROS), and the photocatalytic toluene degradation reactions. This work not only provides an effective way to inhibit the recombination of photogenerated carriers and improve the photocatalytic performance, but also promotes the understanding of defective perovskite-type hydroxide for more photoreactions.

Asunto(s)

RESUMEN

Fenton iron mud (IM) is a hazardous solid waste produced by Fenton oxidation technology after treating industrial wastewater. Thus, it is necessary and challenging to develop a recycling technology to back-convert dangerous materials into useful products. Herein, we develop a sustainable approach to prepare highly active metal oxides via a solid-state grinding method. IM, as an amorphous material, can disperse and interact well with these supported metal oxides, boosting toluene degradation significantly. Among these IM-based catalysts, the catalyst 8% MnOx/IM-0.2VC exhibits the best performance (T100 = 290 °C), originating from the oxide-support interaction and optimal balance between low-temperature reducibility and oxygen vacancy concentration. In addition, in situ diffuse reflectance infrared Fourier transform spectrometry (DRIFTS) results expound that ring breakage is prone to occur on MnOx, and oxygen vacancies are beneficial to adsorb oxygen and activate oxygen species to boost toluene oxidation following the Mars-van Krevelen mechanism. This work advances a complete industrial hazardous waste recycling route to develop extremely active catalysts.

RESUMEN

Non-thermal plasma (NTP) is emerging as an attractive method for decomposing volatile organic compounds (VOCs). In this paper, to study toluene degradation mechanism in air/H2O dielectric barrier discharge (DBD) plasma, optical emission spectrometry (OES) was employed to in-situ monitor active species in plasma, with the permanent degradation products being detected by on-line mass spectrometry under various operations. A detailed kinetic model of NTP with incorporation of non-constant electron filed and thermal effects has also been established. A toluene degradation efficiency > 82% could be achieved at P = 115 W, Cin, toluene = 1000 ppm. The relative spectrum intensity of excited OH, O, H and N2 (A3Σ+u) increased with increase of discharge power and was decreased at higher gas flowrates. Toluene degradation was mainly induced by oxidation of OH and O at afterglow stage, while part of toluene was decomposed by attack of electrons and reactive particles N2 (A3Σ+u) in discharge stage. A toluene degradation pathway has been proposed as: toluene→benzyl→benzaldehyde→benzene→phenoxy→cyclopentadiene→polycarbenes/alkynol→CO2/H2O. Benzoquinone, benzaldehyde, cyclopentadiene and cyclopentadienyl are supposed to be important intermediates for the ring-opening of toluene. Clarification of toluene degradation behaviors at discharge and afterglowing stage could provide new insights for plasma-catalytic process in future.

RESUMEN

Strain inoculation (bioaugmentation) is a potentially useful technology to provide microbiomes with new functionalities. However, there is limited understanding of the genetic factors contributing to successful establishment of inoculants. This work aimed to characterize the genes implicated in proliferation of the monoaromatic compound-degrading Pseudomonas veronii 1YdBTEX2 in nonsterile polluted soils. We generated two independent mutant libraries by random minitransposon-delivered marker insertion followed by deep sequencing (Tn-seq) with a total of 5.0 × 105 unique insertions. Libraries were grown in multiple successive cycles for up to 50 generations either in batch liquid medium or in two types of soil microcosms with different resident microbial content (sand or silt) in the presence of toluene. Analysis of gene insertion abundances at different time points (passed generations of metapopulation growth), in comparison to proportions at start and to in silico generated randomized insertion distributions, allowed to define ~800 essential genes common to both libraries and ~2,700 genes with conditional fitness effects in either liquid or soil (195 of which resulted in fitness gain). Conditional fitness genes largely overlapped among all growth conditions but affected approximately twice as many functions in liquid than in soil. This indicates soil to be a more promiscuous environment for mutant growth, probably because of additional nutrient availability. Commonly depleted genes covered a wide range of biological functions and metabolic pathways, such as inorganic ion transport, fatty acid metabolism, amino acid biosynthesis, or nucleotide and cofactor metabolism. Only sparse gene sets were uncovered whose insertion caused fitness decrease exclusive for soils, which were different between silt and sand. Despite detectable higher resident bacteria and potential protist predatory counts in silt, we were, therefore, unable to detect any immediately obvious candidate genes affecting P. veronii biological competitiveness. In contrast to liquid growth conditions, mutants inactivating flagella biosynthesis and motility consistently gained strong fitness advantage in soils and displayed higher growth rates than wild type. In conclusion, although many gene functions were found to be important for growth in soils, most of these are not specific as they affect growth in liquid minimal medium more in general. This indicates that P. veronii does not need major metabolic reprogramming for proliferation in soil with accessible carbon and generally favorable growth conditions. IMPORTANCE Restoring damaged microbiomes is still a formidable challenge. Classical widely adopted approaches consist of augmenting communities with pure or mixed cultures in the hope that these display their intended selected properties under in situ conditions. Ecological theory, however, dictates that introduction of a nonresident microbe is unlikely to lead to its successful proliferation in a foreign system such as a soil microbiome. In an effort to study this systematically, we used random transposon insertion scanning to identify genes and possibly, metabolic subsystems, that are crucial for growth and survival of a bacterial inoculant (Pseudomonas veronii) for targeted degradation of monoaromatic compounds in contaminated nonsterile soils. Our results indicate that although many gene functions are important for proliferation in soil, they are general factors for growth and not exclusive for soil. In other words, P. veronii is a generalist that is not a priori hindered by the soil for its proliferation and would make a good bioaugmentation candidate.

Asunto(s)

RESUMEN

In this work, LaCoO3 and LaMnO3 perovskites with the higher specific surface area were synthesized using MOFs as precursor, then, the composite catalysts CeO2-LaCoxFeyO3 and CeO2-LaMnxFeyO3 were prepared by using CeO2 as support and Fe element doping LaCoO3 and LaMnO3, respectively. The as-prepared samples were characterized by XRD, SEM, XPS, H2-TPR, and N2 physisorption techniques. Subsequently, toluene was used as the probe molecule for volatile organic compounds (VOCs) to test the catalytic activity of these as-prepared catalysts. The results show that the initial reaction temperature for toluene oxidation on supported perovskite catalysts is lower. Among which, CeO2-LaCo0.25Fe0.75O3 (T90=215 °C, T90: the temperature corresponding to 90% conversion of toluene) and CeO2-LaMn0.25Fe0.75O3 (T90=205 °C) catalysts show the best catalytic performance. Therefore, the supported perovskite prepared in this study has the advantages of high specific surface area, abundant oxygen vacancies, and excellent oxygen mobility, which makes it exhibit better performance in VOCs catalytic oxidation.

Asunto(s)

RESUMEN

Volatile organic compounds (VOCs) have caused a serious threat to the atmosphere and human health. Therefore, it is of great significance to exploit effective catalytic materials for the safe and effective catalytic elimination of VOCs. Herein, Ag-MnOx-ACF composite catalysts were constructed via a two-step impregnation strategy and used for catalytic toluene degradation. A remarkable low-temperature catalytic activity (T100 = 50℃), excellent stability, as well as CO2 selectivity (80%) were achieved over the Ag-MnOx-ACF catalyst. A series of characterizations indicated that the unique manganese defects structure of birnessite phase manganese oxide played an essential role for toluene oxidation, which was conducive to generating surface adsorbed oxygen. The higher ratio of Mn3+/Mn4+, abundant surface adsorbed oxygen and highly dispersed Ag species were determined to significantly facilitate toluene degradation. The mechanism of efficient degradation of toluene at low temperature was proposed. O3 and H2O molecules were activated via surface hydroxyl and Mn defects on Ag-MnOx-ACF to produce sufficient •OH, enhancing the degradation performance of toluene. We provide a new idea for the catalytic oxidation of benzene VOCs at low even room temperatures.

Asunto(s)

RESUMEN

This paper proposed a hybrid system that combined dielectric barrier discharge plasma with catalysis (DPC) for toluene degradation. To improve the performance of DPC, photocatalysts TiO2 were doped by Mn and Fe, respectively. All prepared photocatalysts were characterized using UV-Visual DRS., SEM, XPS, BET, and XRD. The effects of the doping ratio, AC frequency, electric field intensity, gas flow rate, and initial concentration on toluene degradation efficiency, ozone decomposition capacity, and COx selectivity have been investigated. The best doping ratios of Mn and Fe were both 1.0 at%. The increase of electric field intensity in the range of 6.9-10.3 kV/cm could favor the synergism for DPC significantly, but the ascending of AC Frequency failed to do that. Fe-DPC showed slightly better performance than Mn-DPC in degradation efficiency and COx selectivity, while Mn-DPC was ahead of Fe-DPC for the ozone decomposition. Mn-DPC and Fe-DPC both could maintain the high toluene degradation efficiency, when gas flow rate and initial concentration increase from 2.5 to10.1 cm/s and from 700 to 2300 mg/cm3, respectively.

Asunto(s)

RESUMEN

The degradation and mineralization of volatile organic compounds (VOCs) in gas-solid phase photocatalytic systems suffer great challenges due to the low electron transfer efficiency and slow benzene ring-opening kinetics. Hence, a heterojunction photocatalyst of Bi2SiO5/TiO2 has been synthesized by a facile method. Bi2SiO5/TiO2 shows the ability of mineralizing toluene to CO2 with a degradation rate of 85.5%, while TiO2 is 49.0% and presents a continuous deactivation. Experimental characterizations and theoretical calculations indicate that a unique electron transfer channel of Bi/Si-O-Ti can be established in the heterojunction sample due to the coupling of the interface. The channel facilitates electron transfer to the catalyst surface, generating •OH radicals with strong oxidation and ring-opening ability. Moreover, in-situ DRIFTS reveal that the selective generation of benzoic acid on Bi2SiO5/TiO2 heterojunction plays a critical role in the ring-opening of toluene. This work discloses a novel paradigm to obtain the deep and durable photocatalytic mineralization of toluene.

Asunto(s)

RESUMEN

The degradation of toluene from a gas stream by the heterogeneous Fenton process was evaluated over a carbon-coated monolith impregnated or not with iron as catalyst in a bubble column reactor (BCR). The carbon-coated monolith support (CM) was prepared by chemical vapor deposition and the catalyst (CM impregnated with iron - herein called CM-Fe) by adsorption. In the screening of processes (absorption, adsorption and reaction), it was shown that the heterogeneous Fenton process catalyzed by CM-Fe presents the best efficiency (toluene transfer (η) = 10 × 10-3 mol, for 300 mL of liquid solution and 0.69 g of catalyst). Finally, the stability of CM and CM-Fe was evaluated, wherein ten consecutive runs were carried out, the results showing a considerable deactivation of CM during the first five cycles. In contrast, the CM-Fe sample only slightly decreases its activity from the 1st to 2nd cycle (due to a small amount of iron leached from the monolith, 0.7%), remaining stable after that, which is important for applying this technology at the industrial level. This work showed for the first time that the treatment of gaseous effluents containing organic compounds by the Fenton process (which takes place in the liquid phase) using a carbon-coated monolith impregnated with iron is plausible, so the proof of concept was successfully accomplished.

Asunto(s)

RESUMEN

The black yeast Exophiala lecanii-corni of the order Chaetothyriales is notable for its ability to produce abundant quantities of DHN-melanin. While many other Exophiala species are frequent causal agents of human infection, E. lecanii-corni CBS 102400 lacks the thermotolerance requirements that enable pathogenicity, making it appealing for use in targeted functional studies and biotechnological applications. Here, we report the stress tolerance characteristics of E. lecanii-corni, with an emphasis on the influence of melanin on its resistance to various forms of stress. We find that E. lecanii-corni has a distinct stress tolerance profile that includes variation in resistance to temperature, osmotic, and oxidative stress relative to the extremophilic and pathogenic black yeast Exophiala dermatitidis. Notably, the presence of melanin substantially impacts stress resistance in E. lecanii-corni, while this was not found to be the case in E. dermatitidis. The cellular context, therefore, influences the role of melanin in stress protection. In addition, we present a detailed analysis of the E. lecanii-corni genome, revealing key differences in functional genetic content relative to other ascomycetous species, including a significant decrease in abundance of genes encoding ribosomal proteins. In all, this study provides insight into how genetics and physiology may underlie stress tolerance and enhances understanding of the genetic diversity of black yeasts.

RESUMEN

Photocatalytic toluene degradation has attracted tremendous attention because of the growing environmental problem. However, conventional photocatalytic materials used for toluene degradation usually suffer from low carrier separation efficiency and poor stability which will degrade the catalytic performance. Herein, we report the synthesis of a novel heterostructure of GQDs@BiOCl ultrathin nanosheets where the GQDs can rapidly capture and transport photogenerated electrons for effective charge separation, promoting the generation of more reactive oxygen species (·O2- and ·OH radicals) for toluene degradation. In situ DRIFTS measurement and theoretical calculation are performed to unveil the reaction intermediates and the underlying toluene oxidation mechanism. The GQDs@BiOCl heterojunction could facilitate the adsorption and conversion of toluene and the reaction intermediates. Especially, the heterojunction greatly enhances the activation and conversion of benzoic acid and thus expedites the complete toluene degradation. This work presents a new insight on the design of high-performance photocatalysts for efficient degradation of typical air pollutants.

RESUMEN

A vertically configured photocatalytic-microbial fuel cell (photo-MFC) is developed by combining a nanodiamond-decorated ZnO (ZnO/ND) photocathode with a bioanode. The system can effectively couple the light energy with bioenergy to enhance the degradation of volatile organic compounds (VOCs) and boost electricity output. Results show that the composite system exhibits increased performance for toluene removal (60.65%), higher than those of individual parts (ZnO/ND-photocatalysis: 37.16%, MFC: 17.81%). Furthermore, its electrochemical performance is dramatically increased. The peak power density of 120 mW/m2 and the current density of 1.07 A/m2 are generated under light illumination, which are about 1.57-fold and 1.37-fold higher than that under dark (76 mW/m2, 0.78 A/m2), respectively. Microbial community analysis demonstrates Proteobacteria and Firmicute are dominant phyla, implying they play important roles on accelerating the extracellular-electron transfer and toluene degradation. In addition, the underlying mechanism for toluene degradation in the photo-MFC system is preliminary explored. Our results suggest that the photo-MFC has great potential for simultaneous treatment of VOCs with energy recovery.

Asunto(s)

RESUMEN

The present work is devoted to study the post plasma-catalytic (PPC) degradation of toluene using packed-bed discharge (PBD) plasma over K-modified manganese oxide octahedral molecular sieve (OMS-2) catalysts at ambient temperature. Compared to plasma alone, PPC can significantly improve the toluene degradation and mineralization performance simultaneously, and the generation of discharge byproducts and organic intermediates is suppressed. The catalytic capacity of OMS-2 for toluene degradation is greatly promoted by tuning potassium ions (K+) content in OMS-2 tunnel, which might be owing to the formation of more surface active oxygen species derived from weak Mn-O bonds, plenty of oxygen vacancies, as well as more superior low-temperature reducibility. Highest toluene degradation efficiency (89.4%) and COx selectivity (88.9%) can be achieved in plasma-catalysis system over K-modified OMS-2 sample with K/Mn molar ratio of 2 at the SIE of 658 J/L. A long-term stability test has also been successfully carried out to evaluate the stability of K-modified OMS-2 with the assistance of plasma. Possible reaction mechanism for plasma-catalytic degradation of toluene on K-modified OMS-2 catalyst has been proposed based on the plasma diagnosis, catalysts characterization, and organic intermediates identification. This work aims to gaina deeperunderstandingof plasma-catalytic degradation mechanism and provides an environmentally friendly and energy-efficient method for practical volatile organic compounds (VOCs) abatement in PPC process.

RESUMEN

Microorganisms are essential in the degradation of environmental pollutants. Aromatic hydrocarbons, e.g., benzene, toluene, ethylbenzene, and xylene (BTEX), are common aquifer contaminants, whose degradation in situ is often limited by the availability of electron acceptors. It is clear that different electron acceptors such as nitrate, iron, or sulfate support the activity of distinct degraders. However, this has not been demonstrated for the availability of nitrate vs. nitrite, both of which can be respired in reductive nitrogen cycling. Here via DNA-stable isotope probing, we report that nitrate and nitrite provided as electron acceptors in different concentrations and ratios not only modulated the microbial communities responsible for toluene degradation but also influenced how nitrate reduction proceeded. Zoogloeaceae members, mainly Azoarcus spp., were the key toluene degraders with nitrate-only, or both nitrate and nitrite as electron acceptors. In addition, a shift within Azoarcus degrader populations was observed on the amplicon sequence variant (ASV) level depending on electron acceptor ratios. In contrast, members of the Sphingomonadales were likely the most active toluene degraders when only nitrite was provided. Nitrate reduction did not proceed beyond nitrite in the nitrate-only treatment, while it continued when nitrite was initially also present in the microcosms. Likely, this was attributed to the fact that different microbial communities were stimulated and active in different microcosms. Together, these findings demonstrate that the availability of nitrate and nitrite can define degrader community selection and N-reduction outcomes. It also implies that nitrate usage efficiency in bioremediation could possibly be enhanced by an initial co-supply of nitrite, via modulating the active degrader communities.

RESUMEN

Taking our current environmental situation in the world into consideration, people should face growing problems of air and water pollution. Heterogeneous photocatalysis is a highly promising tool to improve both air and water quality through decomposition/mineralization of contaminants directly into harmless CO2 and H2O under ambient conditions. In this contribution, we focused on the synthesis of self-assembly WO3 thin films via an electrochemical approach in the aqueous electrolyte containing fluoride ions toward air purification. The effect of preparation conditions such as applied potential (10-50 V), anodization time (15-120 min), concentration of H2SO4 (0.5-1.5 M) and NaF (0.1-1.0 wt.%) on the morphology, photocurrent response, and photocatalytic activity addressed to removal of air pollutant in the presence of as-prepared WO3 samples were thoroughly examined and presented. The results revealed the growth of nanoplatelets and their gradual transformation into flower-like structures. The oxide layers and platelet thickness of the WO3 samples were found to be proportionally related with the synthesis conditions. The photocatalytic ability toward air purification was evaluated by degradation of toluene from air mixture using low-powered LEDs as an irradiation source (λmax = 415 nm). The highest photoactivity was achieved in presence of the sample which possessed a well-ordered, regular shape and repeatable distribution of flower buds (100% of degradation). The results have confirmed that the oxide layer thickness of the anodic WO3 significantly affected the photocatalytic activity, which increased with the increasing thickness of WO3 (to 1.05 µm) and then had a downward trend. The photocurrent response evidenced that the well-organized sample had the highest ability in photocurrent generation under UV-Vis and Vis irradiation. Finally, a possible growth mechanism of WO3 NFs was also discussed.

RESUMEN

Zoogloea oleivorans, capable of using toluene as a sole source of carbon and energy, was earlier found to be an active degrader under microaerobic conditions in aquifer samples. To uncover the genetic background of the ability of microaerobic toluene degradation in Z. oleivorans, the whole-genome sequence of the type strain BucT was revealed. Metatranscriptomic sequence reads, originated from a previous SIP study on microaerobic toluene degradation, were mapped on the genome. The genome (5.68 Mb) had a mean G + C content of 62.5%, 5005 protein coding gene sequences and 80 RNA genes. Annotation predicted that 66 genes were involved in the metabolism of aromatic compounds. Genome analysis revealed the presence of a cluster with genes coding for a multicomponent phenol-hydroxylase system and a complete catechol meta-cleavage pathway. Another cluster flanked by mobile-element protein coding genes coded a partial catechol meta-cleavage pathway including a subfamily I.2.C-type extradiol dioxygenase. Analysis of metatranscriptomic data of a microaerobic toluene-degrading enrichment, containing Z . oleivorans as an active-toluene degrader revealed that a toluene dioxygenase-like enzyme was responsible for the ring-hydroxylation, while enzymes of the partial catechol meta-cleavage pathway coding cluster were responsible for further degradation of the aromatic ring under microaerobic conditions. This further advances our understanding of aromatic hydrocarbon degradation between fully oxic and strictly anoxic conditions.

Asunto(s)