RESUMEN
Perovskite solar cells (PSCs) have recently emerged as highly efficient and cutting-edge photovoltaic technology. In inverted PSCs, challenges are focused on the insufficient interface contact and energy level misalignment between the electron transport layer (ETL) and the metal electrode. Hence, the cathode interfacial layer (CIL) plays a crucial role in regulating energy levels and enabling charge extraction in PSCs. In this study, a low-cost phenanthroline derivative, 4,7-dimethoxy-1,10-phenanthroline (Phen-OMe), is developed as an efficient CIL between the PCBM and Ag electrodes. The incorporation of Phen-OMe not only improves the interfacial contact but also effectively reduces the work function (WF) of the Ag electrode, thus promoting charge dissociation and transport at the interface. Through utilizing a wide-band-gap perovskite with the band gap of 1.77 eV as the active layer by a simple, high-throughput, and low-cost doctor-blade coating process, the power conversion efficiency (PCE) is enhanced significantly from 16.11% of the control device to 18.61% of the device with Phen-OMe as the CIL. Interestingly, Phen-OMe shows a broad application as the CIL in PSCs and tandem solar cells (TSCs), resulting in a boosted efficiency of 22.29% in intermediate-band-gap PSCs and a PCE of 22.05% with a high open-circuit voltage (VOC) of 2.12 V in the perovskite/organic TSC. This achievement shows that Phen-OMe would be a potential candidate as low-cost and efficient CILs for PSCs.
RESUMEN
High Br-content mixed-halide perovskites with wide-bandgap (WBG) of 1.6-2.0 eV have showcased vast potential to be used in tandem solar cells. However, they often suffer from severe halide segregation, phase separation and ion migration issues, which would accelerate the decomposition of perovskites films, deteriorate the photovoltaic performance and even aggravate the lead leakage from damaged devices. Here, we report a novel chemical synergic interaction strategy to mitigate the abovementioned issues. A small amount of cationic ß-cyclodextrin, composed of multiple ammonium cations, chlorine ions and abundant hydroxyl functional groups, was introduced into WBG perovskites, which effectively stabilized the halide ions and homogenized the phase distribution, comprehensively passivated the defects,and efficiently immobilized the Pb2+ ions. Encouragingly, the cationic ß-cyclodextrin was universal and useful for different WBG perovskites, which favorably boosted the efficiencies by 10%-36% and extended the device operational stability to 2680 h. The integrated four-terminal or six-terminal all-perovskite tandem solar cells exhibited efficiencies up to 24.39% and 22.42%, respectively. We demonstrated the cationic ß-cyclodextrin-assisted internal chemical encapsulation effectively prevented the Pb leakage from severely damaged devices with only 5.63 ppb Pb leaching out. The target tandem solar cells with cationic ß-cyclodextrin modification also realized a Pb sequestration efficiency of 93.4%.
RESUMEN
The compatibility of perovskite and organic photovoltaic materials in solution processing provides a significant advantage in the fabrication of high-efficiency perovskite/organic tandem solar cells. However, additional recombination losses can occur during exciton dissociation in organic materials, leading to energy losses in the near-infrared region of tandem devices. Consequently, a ternary organic rear subcell is designed containing two narrow-bandgap non-fullerene acceptors to enhance the absorption of near-infrared light. Simultaneously, a unique diffusion-controlled growth technique is adopted to optimize the morphology of the ternary active layer, thereby improving exciton dissociation efficiency. This innovation not only broadens the absorption range of near-infrared light but also facilitates the generation and effective dissociation of excitons. Owing to these technological improvements, the power conversion efficiency (PCE) of organic solar cells increased to 19.2%. Furthermore, a wide-bandgap perovskite front subcell is integrated with a narrow-bandgap organic rear subcell to develop a perovskite/organic tandem solar cell. Owing to the reduction in near-infrared energy loss, the PCE of this tandem device significantly improved, reaching 24.5%.
RESUMEN
Inverted perovskite/organic tandem solar cells (P/O TSCs) suffer from poor long-term device stability due to halide segregation in organic-inorganic hybrid wide-bandgap (WBG) perovskites, which hinders their practical deployment. Therefore, developing all-inorganic WBG perovskites for incorporation into P/O TSCs is a promising strategy because of their superior stability under continuous illumination. However, these inorganic WBG perovskites also face some critical issues, including rapid crystallization, phase instability, and large energy loss, etc. To tackle these issues, two multifunctional additives based on 9,10-anthraquinone-2-sulfonic acid (AQS) are developed to regulate the perovskite crystallization by mediating the intermediate phases and suppress the halide segregation through the redox-shuttle effect. By coupling with organic cations having the desirable functional groups and dipole moments, these additives can effectively passivate the defects and adjust the alignment of interface energy levels. Consequently, a record Voc approaching 1.3 V with high power conversion efficiency (PCE) of 18.59% could be achieved in a 1.78 eV bandgap single-junction inverted all-inorganic PSC. More importantly, the P/O TSC derived from this cell demonstrates a T90 lifetime of 1000 h under continuous operation, presenting the most stable P/O TSCs reported so far.
RESUMEN
The perovskite/silicon tandem solar cell represents one of the most promising avenues for exceeding the Shockley-Queisser limit for single-junction solar cells at a reasonable cost. Remarkably, its efficiency has rapidly increased from 13.7% in 2015 to 34.6% in 2024. Despite the significant research efforts dedicated to this topic, the "secret" to achieving high-performance perovskite/silicon tandem solar cells seems to be confined to a few research groups. Additionally, the discrepancies in preparation and characterization between single-junction and tandem solar cells continue to impede the transition from efficient single-junction to efficient tandem solar cells. This review first revisits the key milestones in the development of monolithic perovskite/silicon tandem solar cells over the past decade. Then, a comprehensive analysis of the background, advancements, and challenges in perovskite/silicon tandem solar cells is provided, following the sequence of the tandem fabrication process. The progress and limitations of the prevalent stability measurements for tandem devices are also discussed. Finally, a roadmap for designing efficient, scalable, and stable perovskite/silicon tandem solar cells is outlined. This review takes the growth history into consideration while charting the future course of perovskite/silicon tandem research.
RESUMEN
Narrow-bandgap (NBG) mixed tin-lead (Sn-Pb) perovskite solar cells (PSCs) serve as crucial top subcells in all-perovskite tandem solar cells (TSCs). However, the prevalent use of poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT: PSS) hole transport layers (HTLs) in NBG PSCs compromises device efficiency and stability. To address this, the study proposes a revitalizing strategy for the buried interface of Sn-Pb perovskites by directly immersing acetylcholine chloride (ACh) into PEDOT: PSS. ACh acts as a proficient "diver," not only modulating the bottom PEDOT: PSS HTLs but also facilitating the reconstruction of the buried interface and significantly enhancing the quality of the top perovskite layers. This intervention with ACh prevents Sn2+ oxidation, mitigates buried defects, and encourages the growth of large, densely packed grains within Sn-Pb perovskites. Consequently, the optimized NBG PSCs exhibit significantly improved hole transport and reduced carrier recombination, achieving a steady-state efficiency of 22.98% with enhanced stability. Furthermore, these optimized NBG Sn-Pb cells enable highly efficient two-terminal and four-terminal all-perovskite TSCs, boasting steady-state efficiencies of 27.54% (certified at 26.41%) and 28.01%, respectively. This study emphasizes the importance of optimizing NBG PSCs through buried interface reconstruction, propelling the advancement of all-perovskite TSCs.
RESUMEN
Integrated electrochromic devices powered by photovoltaic cells have evoked a lot of interest due to their promising commercial prospects. However, their application has been restricted by the voltage adaption between the self-powered voltage and the color-changing threshold voltage (Vt). Herein, a strategy of bidirectional voltage regulating is proposed to develop a novel stand-alone integrated photovoltachromic device (I-PVCD), which integrates perovskite/organic tandem solar cells (P/O-TSCs) to drive color-changing process of conjugated poly(3-hexylthiophene) (P3HT) films. To lower the driving-voltage of electrochromic layer, C60 is introduced to decrease the onset oxidation potential of P3HT film, and thus leading to a reduced Vt of 0.70 V benefiting from the enhanced highest occupied molecular orbital level and decreased charge transfer resistance from 67.46 to 49.89 Ω. Simultaneously, PBDB-T is utilized as the hole transport layer in the interconnecting layer of CsPbI2Br/PTB7-Th:IEICO-4F P/O-TSC to improve its open-circuit voltage (Voc) to 1.85 V. Under their synergetic merits, a I-PVCD with a wider self-adaptive voltage range is achieved. This device can undergo fast and reversible chromic transition from beautiful magenta to transparent only under the solar radiation, and demonstrates a coloration efficiency of 351.90 cm2 C-1 and a switching time of 2 s besides its excellent operating reliability.
RESUMEN
The reverse bias stability is a key concern for the commercialization and reliability of halide perovskite photovoltaics. Here, the robustness of perovskite-silicon tandem solar cells to reverse bias electrical degradation down to -40 V is investigated. The two-terminal tandem configuration, with the perovskite coupled to silicon, can improve the solar cell resistance to severe negative voltages when the tandem device is properly designed. While perovskite cells typically exhibit early reverse bias breakdown voltages, the serial connection with silicon cells with large shunt resistances and high voltage breakdown limits their negative polarization and prevent the passage of large current densities when reverse biased. The importance of careful optical design is illustrated, with bottom-limited conditions required to prevent the perovskite top cell from exploring its own breakdown. This aspect is of great importance in the case of partial shading events when the solar spectrum is richer in the IR components than the standard AM1.5G. Notably, 100% of efficiency retained after polarization at -40 V in different stressing conditions is observed. The results presented suggest that standard industrial bypass diode schemes may be compatible with silicon/perovskite tandem photovoltaics and provide new guidelines for the standardization of the stressing protocols.
RESUMEN
The imperfect charge behavior at the interfaces of perovskite/electron-transport layer (ETL)/transparent conducting oxide (TCO) limits the further performance improvement of perovskite/silicon tandem solar cells. Herein, an indium tin oxide interlayer is deposited between ETL and TCO to address this issue. Specifically, the interlayer is prepared using an all-physical and H2O-free method, electron-beam evaporation, which can avoid any potential damage to the underlying perovskite and ETL layers. Moreover, the interlayer's composition can be readily tuned by changing the evaporator component, enabling authors to regulate the contact resistance and energy-level alignment of the ETL/TCO interface. Consequently, the resultant perovskite/silicon tandem solar cells exhibit an impressive power conversion efficiency (PCE) of 30.8% (certified 30.3%). Moreover, the device retains 98% of its initial PCE after continuous operation under ambient conditions for 1078 h, representing one of the most stable and efficient perovskite/silicon tandem solar cells.
RESUMEN
Phase heterogeneity of bromine-iodine (Br-I) mixed wide-bandgap (WBG) perovskites has detrimental effects on solar cell performance and stability. Here, we report a heterointerface anchoring strategy to homogenize the Br-I distribution and mitigate the segregation of Br-rich WBG-perovskite phases. We find that methoxy-substituted phenyl ethylammonium (x-MeOPEA+) ligands not only contribute to the crystal growth with vertical orientation but also promote halide homogenization and defect passivation near the buried perovskite/hole transport layer (HTL) interface as well as reduce trap-mediated recombination. Based on improvements in WBG-perovskite homogeneity and heterointerface contacts, NiOx-based opaque WBG-perovskite solar cells (WBG-PSCs) achieved impressive open-circuit voltage (Voc) and fill factor (FF) values of 1.22 V and 83%, respectively. Moreover, semitransparent WBG-PSCs exhibit a PCE of 18.5% (15.4% for the IZO front side) and a high FF of 80.7% (79.4% for the IZO front side) for a designated illumination area (da) of 0.12 cm2. Such a strategy further enables 24.3%-efficient two-terminal perovskite/silicon (double-polished) tandem solar cells (da of 1.159 cm2) with a high Voc of over 1.90 V. The tandem devices also show high operational stability over 1000 h during T90 lifetime measurements.
RESUMEN
This study proposes a titanium silicide (TiSi2) recombination layer for perovskite/tunnel oxide passivated contact (TOPCon) 2-T tandem solar cells as an alternative to conventional transparent conductive oxide (TCO)-based recombination layers. TiSi2 was formed while TiO2 was made by oxidizing a Ti film deposited on the p+-Si layer. The reaction formation mechanism was proposed based on the diffusion theory supported by experimental results. The optical and electrical properties of the TiSi2 layer were optimized by controlling the initial Ti thicknesses (5-100 nm). With the initial Ti of 50 nm, the lowest reflectance and highly ohmic contact between the TiO2 and p+-Si layers with a contact resistivity of 161.48 mΩ·cm2 were obtained. In contrast, the TCO interlayer shows Schottky behavior with much higher contact resistivities. As the recombination layer of TiSi2 and the electron transport layer of TiO2 are formed simultaneously, the process steps become simpler. Finally, the MAPbI3/TOPCon tandem device yielded an efficiency of 16.23%, marking the first reported efficiency for a device including a silicide-based interlayer.
RESUMEN
Inverted perovskite solar cells (PSCs) are preferred for tandem applications due to their superior compatibility with diverse bottom solar cells. However, the solution processing and low formation energy of perovskites inevitably lead to numerous defects at both the bulk and interfaces. We report a facile and effective strategy for precisely modulating the perovskite by incorporating AlOx deposited by atomic layer deposition (ALD) on the top interface. We find that Al3+ can not only infiltrate the bulk phase and interact with halide ions to suppress ion migration and phase separation but also regulate the arrangement of energy levels and passivate defects on the perovskite surface and grain boundaries. Additionally, ALD-AlOx exhibits an encapsulation effect through a dense interlayer. Consequently, the ALD-AlOx treatment can significantly improve the power conversion efficiency (PCE) to 21.80 % for 1.66 electron volt (eV) PSCs. A monolithic perovskite-silicon TSCs using AlOx-modified perovskite achieved a PCE of 28.5 % with excellent photothermal stability. More importantly, the resulting 1.55â eV PSC and module achieved a PCE of 25.08 % (0.04â cm2) and 21.01 % (aperture area of 15.5â cm2), respectively. Our study provides an effective way to efficient and stable wide-band gap perovskite for perovskite-silicon TSCs and paves the way for large-area inverted PSCs.
RESUMEN
Two-terminal (2T) perovskite-based tandem solar cells (TSCs) arouse burgeoning interest in breaking the Shockley-Queisser (S-Q) limit of single-junction solar cells by combining two subcells with different bandgaps. However, the highest certified efficiency of 2T perovskite-based TSCs (33.9%) lags behind the theoretical limit (42-43%). A vital challenge limiting the development of 2T perovskite-based TSCs is the transparent recombination layers/interconnecting layers (RLs) design between two subcells. To improve the performance of 2T perovskite-based TSCs, RLs simultaneously fulfill the optical loss, contact resistance, carrier mobility, stress management, and conformal coverage requirements. In this review, the definition, functions, and requirements of RLs in 2T perovskite-based TSCs are presented. The insightful characterization methods applicable to RLs, which are inspiring for further research on the RLs both in 2T perovskite-based two-junction and multi-junction TSCs, are also highlighted. Finally, the key factors that currently limit the performance enhancement of RLs and the future directions that should be continuously focused on are summarized.
RESUMEN
Monolithic textured perovskite/silicon tandem solar cells (TSCs) are expected to achieve maximum light capture at the lowest cost, potentially exhibiting the best power conversion efficiency. However, it is challenging to fabricate high-quality perovskite films and preferred crystal orientation on commercially textured silicon substrates with micrometer-size pyramids. Here, we introduced a bulky organic molecule (4-fluorobenzylamine hydroiodide (F-PMAI)) as a perovskite additive. It is found that F-PMAI can retard the crystallization process of perovskite film through hydrogen bond interaction between F- and FA+ and reduce (111) facet surface energy due to enhanced adsorption energy of F-PMAI on the (111) facet. Besides, the bulky molecular is extruded to the bottom and top of perovskite film after crystal growth, which can passivate interface defects through strong interaction between F-PMA+ and undercoordinated Pb2+/I-. As a result, the additive facilitates the formation of large perovskite grains and (111) preferred orientation with a reduced trap-state density, thereby promoting charge carrier transportation, and enhancing device performance and stability. The perovskite/silicon TSCs achieved a champion efficiency of 30.05% based on a silicon thin film tunneling junction. In addition, the devices exhibit excellent long-term thermal and light stability without encapsulation. This work provides an effective strategy for achieving efficient and stable TSCs.
RESUMEN
Sputtered indium tin oxide (ITO) fulfills the requirements of top transparent electrodes (TTEs) in semitransparent perovskite solar cells (PSCs) and stacked tandem solar cells (TSCs), as well as of the recombination layers in monolithic TSCs. However, the high-energy ITO particles will cause damage to the devices. Herein, the interface reactive sputtering strategy is proposed to construct cost-effective TTEs with high transmittance and excellent carrier transporting ability. Polyethylenimine (PEI) is chosen as the interface reactant that can react with sputtered ITO nanoparticles, so that, coordination compounds can be formed during the deposition process, facilitating the carrier transport at the interface of C60/PEI/ITO. Besides, the impact force of energetic ITO particles is greatly alleviated, and the intactness of the underlying C60 layer and perovskite layer is guaranteed. Thus, the prepared semitransparent subcells achieve a significantly enhanced power conversion efficiency (PCE) of 19.17%, surpassing those based on C60/ITO (11.64%). Moreover, the PEI-based devices demonstrate excellent storage stability, which maintains 98% of their original PCEs after 2000 h. On the strength of the interface reactive sputtering ITO electrode, a stacked all-perovskite TSC with a PCE of 26.89% and a monolithic perovskite-organic TSC with a PCE of 24.33% are successfully fabricated.
RESUMEN
The efficiency of rigid perovskite/silicon tandem solar cells has reached 33.9%. However, there has been no report on flexible perovskite/silicon tandem solar cells due to the challenge of overcoming the poor light absorption of ultrathin silicon bottom cells while maintaining their mechanical flexibility. Herein, we report the first demonstration of the perovskite/silicon tandem solar cell based on flexible ultrathin silicon. We show that reducing the wafer thicknesses and feature sizes of the light-trapping textures can significantly improve the flexibility of silicon without sacrificing light utilization. In addition, the capping of the perovskite top cells can further improve the device's mechanical durability by shifting the neutral plane toward the silicon surface that is prone to fracture. Finally, the resulting ultrathin (â¼30 µm) flexible perovskite/silicon tandem solar cell achieves a certified stabilized efficiency of 22.8% with an extremely high power-to-weight ratio of 3.12 W g-1. Moreover, the flexible tandems exhibit remarkable bending durability, maintaining 98.2% of their initial performance after 3000 bending cycles at a radius of only 1 cm.
RESUMEN
Renewable energy is crucial for sustainable future, and Cu2ZnSnS4 (CZTS) based solar cells shine as a beacon of hope. CZTS, composed of abundant, low-cost, and non-toxic elements, shares similarities with Cu(In,Ga)Se2 (CIGS). However, despite its promise and appealing properties for solar cells, CZTS-based solar cells faces performance challenges owing to inherent issues with CZTS material, and conventional substrate structure complexities. This review critically examines these roadblocks, explores ongoing efforts and breakthroughs, providing insight into the evolving landscape of CZTS-based solar cells research. Furthermore, as an optimistic turn in the field, the review first highlights the crucial need to transition to a superstrate structure for CZTS-based single junction devices, and summarizes the substantial progress made in this direction. Subsequently, dive into the discussion about the fascinating realm of CZTS-based tandem devices, providing an overview of the existing literature as well as outlining the possible potential strategies for enhancing the efficiency of such devices. Finally, the review provides a useful outlook that outlines the priorities for future research and suggesting where efforts should concentrate to shape the future of CZTS-based solar cells.
RESUMEN
The primary performance limitation in inverted perovskite-based solar cells is the interface between the fullerene-based electron transport layers and the perovskite. Atomic layer deposited thin aluminum oxide (AlOX) interlayers that reduce nonradiative recombination at the perovskite/C60 interface are developed, resulting in >60 millivolts improvement in open-circuit voltage and 1% absolute improvement in power conversion efficiency. Surface-sensitive characterizations indicate the presence of a thin, conformally deposited AlOx layer, functioning as a passivating contact. These interlayers work universally using different lead-halide-based absorbers with different compositions where the 1.55 electron volts bandgap single junction devices reach >23% power conversion efficiency. A reduction of metallic Pb0 is found and the compact layer prevents in- and egress of volatile species, synergistically improving the stability. AlOX-modified wide-bandgap perovskite absorbers as a top cell in a monolithic perovskite-silicon tandem enable a certified power conversion efficiency of 29.9% and open-circuit voltages above 1.92 volts for 1.17 square centimeters device area.
RESUMEN
Axially heterostructured nanowires (NWs) constitute a promising platform for advanced electronic and optoelectronic nanodevices. The presence of different materials in these NWs introduces a mismatch resulting in complex strain distributions susceptible of changing the band gap and carrier mobility. The growth of these NWs presents challenges related to the reservoir effect in the catalysts droplet that affect to the junction abruptness, and the occurrence of undesired lateral growth creating core-shell heterostructures that introduce additional strain. We present herein a cathodoluminescence (CL) analysis on axially heterostructured InP/InGaP NWs with tandem solar cell structure. The CL is complemented with micro Raman, micro photoluminescence (PL), and high resolution transmission electron microscopy measurements. The results reveal the zinc blende structure of the NWs, the presence of a thin InGaP shell around the InP bottom cell, along with its associated strain, and the doping distribution.
RESUMEN
Perovskite/silicon tandem solar cells have garnered considerable interest due to their potential to surpass the Shockley-Queisser limit of single-junction Si solar cells. The rapidly advanced efficiencies of perovskite/silicon tandem solar cells benefit from the significant improvements in perovskite technology. Beginning with the evolution of wide bandgap perovskite cells towards two-terminal (2T) perovskite/silicon tandem solar cells, this work concentrates on component engineering, additives, and interface modification of wide bandgap perovskite cells. Furthermore, the advancements in 2T perovskite/silicon tandem solar cells are presented, and the influence of the central interconnect layer and the Si cell on the progression of the tandem solar cells is emphasized. Finally, we discuss the challenges and obstacles associated with 2T perovskite/silicon tandem solar cells, conducting a thorough analysis and providing a prospect for their future.