RESUMEN

This in vitro study aimed to analyze the surface roughness (Ra) and color stability (ΔEab, ΔE00) following simulated mechanical brushing and to evaluate the microtensile (µTBS) of self-adhering resin flowable (SARF) to dentin. The selected materials were Constic, Yflow AS, and Tetric N flow (TNF/control). Thirty composite resin cylinders were fabricated for surface property evaluation. Ra and color were assessed both before and after simulated brushing. The thresholds of 50:50% perceptibility and acceptability of color differences in the evaluated resins were assessed. For µTBS analysis, fifteen molars were selected, sectioned to expose flat dentin surfaces, and restored according to the manufacturers' instructions for microtensile testing. There were statistically significant differences in Ra among the groups, with Constic exhibiting the highest Ra value (0.702 µm; p < 0.05), whereas Yflow AS presented the lowest Ra value (0.184 µm). No statistically significant difference in color was observed among the groups (p > 0.05). The 50:50% perceptibility and acceptability thresholds were set at 1.2 and 2.7 for ΔEab and 0.8 and 1.8 for ΔE 00. All the results fell within the acceptable limits. The mean µTBS values of Constic, Yflow AS, and TNF were 10.649 MPa, 8.170 MPa, and 33.669 MPa, respectively. This study revealed increased Ra and comparable color stability among all the tested composite resins after abrasion. However, the SARF exhibited lower µTBS compared to conventional using an adhesive system.

RESUMEN

The surface properties of titanium dental implants, such as wettability and surface free energy, influence the adhesion of microorganisms responsible for inflammation and infection of peri-implant tissues. This systematic review aimed to investigate the relationship of titanium surface treatments, surface free energy/wettability property and its relationship with bacterial activity. This systematic review followed PRISMA 2020 (Preferred Reporting Items for Systematic Review and MetaAnalysis) guidelines and was registered in the OpenScience Framework (osf.io/ejnct). PubMed, ScienceDirect, Embase, and Scopus library databases were used from custom search strategies. Inclusion criteria were research articles that studied titanium or its alloys for wetting property and its correlation with adhesion. Of the 697 articles initially identified, 27 were selected after full-text reading and application of the eligibility criteria. In general, the evaluated studies showed that regardless of the surface treatment, there was an increase in titanium hydrophilicity and concomitant reduction in bacterial adhesion. The surface treatment of titanium results in higher surface free energy and lower bacterial adhesion. Hydrophilic titanium surfaces prevent adhesion of hydrophobic bacteria in early stages.

Asunto(s)

RESUMEN

Introduction: Natural products are an option to be used in different conditions in the oral cavity, such as Camellia sinensis, which due to its different properties would be beneficial in the erosion of the dental surface. Objetive: Determinar el efecto del extracto de Camellia sinensis (C. sinensis) adicionado con flúor frente a la acción erosiva de ácidos no bacterianos en la superficie de la dentina humana. Materials and Methods: Quasi-experimental, prospective, longitudinal, and in vitro study, consisting of 50 samples of human dentin, which were classified into 5 study groups: distilled water, hydrochloric acid, 2% C. sinensis extract, sodium fluoride. 2% and 2% C. sinensis extract added with 2% sodium fluoride. The surface roughness of each sample was evaluated with the SRT6200 digital roughness meter, obtaining a total average roughness and the measurements were carried out in two moments. Results: It was observed that the 2% C. sinensis extract, the 2% sodium fluoride, and the C. sinensis extract added with 2% sodium fluoride, showed a variation in surface roughness between before and after, which was not significant (p<0.05) in all cases. It should be noted that the C. sinensis plus sodium fluoride group is the one that obtained the best variation in the mean surface roughness than the other groups studied. Conclusions: The 2% C. sinensis extract, 2% sodium fluoride, and the combination of both compounds demonstrated an inhibitory effect against the erosive action of hydrochloric acid (0.01 M) on the dentin surface, not presenting a statistically significant difference in the results.

Introducción: Los productos naturales son una opción para ser usados en diferentes afecciones en la cavidad bucal, como lo podría ser la Camellia sinensis, que por sus diferentes propiedades sería de beneficio en la erosión de la superficie dental. Objetivo: Determinar el efecto del extracto de Camellia sinensis (C. sinensis) adicionado con flúor frente a la acción erosiva de ácidos no bacterianos en la superficie de la dentina humana. Materiales y Métodos: Estudio cuasi experimental, prospectivo, longitudinal ein vitro, constituido por 50 muestras de dentina de dientes permanentes, que se clasificaron en 5 grupos de estudio: Agua destilada, ácido clorhídrico, extracto de C. sinensis a 2%, fluoruro de sodio al 2% y extracto de C. sinensisa 2% adicionado con fluoruro de sodio al 2%. Se evaluó la rugosidad superficial de cada muestra con el rugosímetro digital SRT6200, obteniéndose una rugosidad media total y se realizaron las mediciones en dos momentos. Resultado: Se observó que el extracto de C. sinensisal 2%, el fluoruro de sodio al 2% y el extracto de C. sinensis adicionado con fluoruro de sodio al 2%, presentaron una variación de la rugosidad superficial entre el antes y el después, no siendo esta significativa (p<0.05) en todos los casos. Cabe resaltar que el grupo C. sinensis más fluoruro de sodio, es el que obtuvo una mejor variación de la media de rugosidad superficial, que los otros grupos estudiados. Conclusión: El extracto de C. sinensisal 2%, el fluoruro de sodio al 2% y la combinación de ambos compuestos demostraron un efecto inhibitorio frente a la acción erosiva del ácido clorhídrico (0,01 M) en la superficie de dentina, no presentando una diferencia estadísticamente significativa en los resultados.

Asunto(s)

RESUMEN

Introdução: A cárie dentária ainda se constitui um problema de saúde pública. Áreas adjacentes a restaurações são frequentemente acometidas por cárie. Por mais que as resinas compostas estejam sendo estudadas e melhoradas, ainda não apresentam atividade antimicrobiana. As cascas da romã (Punica Granatum) são um recurso potencial para compostos bioativos como fenólicos, proantocianidinas e flavonoides, além de apresentarem atividade antioxidante e efeito inibitório contra bactérias Gram-negativas e Gram-positivas. Objetivo: modificar a resina composta Opus Bulk Fill Flow (FGM®) com o extrato acetônico da casca da romã em diferentes concentrações e avaliar a rugosidade da superfície e mudança de cor. Metodologia: foi realizada a extração de 5g de casca da romã utilizando 100mL de solvente acetona 70%. Após rotaevaporação, filtragem e liofilização do extrato, este foi macerado, peneirado e pesado em concentrações diferentes a partir da concentração inibitória mínima capaz de inibir o crescimento de Streptococcus mutans ATCC 700610. A resina composta Opus Bulk Fill Flow foi modificada com esse extrato em diferentes concentrações de forma a gerar 5 grupos: Controle 0 µg (n=10), G930 µg (n=10), G1860 µg (n=10), G3730 µg (n=10) e G7460 µg (n=10). Rugosidade (Ra), diferença de cor (ΔE00) e índice de brancura (WID) foram submetidos aos testes de normalidade. Os dados não-paramétricos de Ra foram submetidos ao teste de Kruskal-Wallis com pós-teste de Dunn e os dados paramétricos do ΔE00 e WID foram submetidos ao teste ANOVA 1 Fator com pósteste de Tukey por meio do software GraphPad Prism 8 e Microsoft Excel 2019. Resultados: Verificou-se que a média do índice de brancura (WID) diminuiu conforme o aumento da concentração do extrato na resina modificada (p<0,05), assim como, as resinas modificadas se tornaram, visivelmente a olho nu, um pouco mais amareladas. Após 1 mês, as amostras dos grupos experimentais sofreram a mesma variação de cor (ΔE00) que o grupo controle, uma vez que os valores das médias foram semelhantes. Portanto, todos os grupos apresentaram estabilidade de cor. A rugosidade superficial (Ra) não mostrou diferença estatisticamente significativa (p>0,05). Todos os grupos apresentaram médias com valores similares a 0,06µm. Conclusão: A alteração de cor na resina, com a inserção do extrato, ainda na maior concentração, se manteve na classificação do matiz A. O que não afeta as propriedades organolépticas e pode ser considerada uma cor similar à cor dos dentes naturais. A adição do extrato na resina manteve a rugosidade superficial de todos os grupos dentro do valor ideal, prevenindo a adesão de biofilmes e microrganismos e proporcionando conforto ao toque da língua (AU).

Introduction: Dental caries still constitutes a public health problem. Areas adjacent to restorations are often affected by caries. Even though resin composites are being studied and improved, they still do not have antimicrobial activity. Pomegranate peels (Punica Granatum) are a potential resource for bioactive compounds such as phenolics, proanthocyanidins and flavonoids, in addition to presenting antioxidant activity and inhibitory effects against Gram-negative and Gram-positive bacteria. Objective: to modify the Opus Bulk Fill Flow (FGM™) resin composite with the acetone extract of pomegranate peel in different concentrations and evaluate the surface roughness, and color change. Methodology: 5g of pomegranate peel was extracted using 100mL of 70% acetone solvent. After rotary evaporation, filtering and lyophilization of the extract, it was macerated, sieved and weighed at different concentrations based on the minimum inhibitory concentration capable of inhibiting the growth of Streptococcus mutans ATCC 700610. The Opus Bulk Fill Flow resin composite was modified with this extract in different concentrations to generate 5 groups: Control 0 µg (n=10), G930 µg (n=10), G1860 µg (n=10), G3730 µg (n=10) e G7460 µg (n=10). Roughness (Ra) and color difference (ΔE00) were subjected to normality tests and non-parametric data were subjected to the Kruskal-Wallis test with Dunn's post-test using GraphPad Prism 8 and Microsoft Excel 2019 software. Results: It was found that the average whiteness index (WID) decreased as the concentration of the extract in the modified resin increased (p<0.05), as well as the modified resins became, visibly to the naked eye, a little more yellowish. After 1 month, samples from the experimental groups suffered the same color variation (ΔE00) as the control group, since the average values were similar. Therefore, all groups showed color stability. Surface roughness (Ra) did not show a statistically significant difference (p>0.05). All groups presented average values similar to 0.06µm. Conclusion: The color change in the resin, with the insertion of the extract, even at the highest concentration, remained in the classification of hue A. This does not affect the organoleptic properties and can be considered a color similar to the color of natural teeth. The addition of the extract to the resin composite maintained the surface roughness of all groups within the ideal value, preventing the adhesion of biofilms and microorganisms and providing comfort to the touch of the tongue (AU).

Asunto(s)

RESUMEN

PURPOSE: This study evaluated the effect of toothbrushing cycles on surface roughness (Ra), gloss (GU), and morphology of two zirconia finishing and polishing protocols. MATERIALS AND METHODS: An ultra-translucent zirconia disc was sectioned into rectangular plates (12 mm × 7 mm × 3 mm) and divided into two groups according to the polishing and finishing system used (diamond rubber abrasive/DRA or glazing/GLA). Bovine enamel (BEN) plates with the same dimensions were used as a Control. Specimens of zirconia and enamel were analyzed for Ra and GU (n = 11) and surface morphology by scanning electron microscopy (n = 3) before toothbrushing (baseline) and after 15,000 and 30,000 toothbrushing cycles. Ra and GU data were analyzed by ANOVA two-way and post-hoc Tukey's test (α = 0.05), while the surface morphology was analyzed qualitatively. RESULTS: The Ra decreased significantly after 30,000 toothbrushing cycles for DRA and GLA zirconia ceramics. DRA showed a higher GU at the baseline, after 15,000 and 30,000 toothbrushing cycles than GLA and BEN. Toothbrushing polished the zirconia, creating a smooth surface, while no changes were observed for BEN. CONCLUSIONS: The increase in toothbrushing cycles (30,000) changed the surface roughness of DRA and GLA zirconia ceramics. DRA zirconia presented the highest GU, which did not change with toothbrushing.

Asunto(s)

RESUMEN

Background: The goal of this in vitro study was to compare three different surfaces: two types of implant surfaces commercially available ([a] smooth/machined and [b] acid-treated surface) versus (c) anodized surface. Discs were manufactured with commercially pure titanium (CP) grade IV, which were subsequently analyzed by scanning microscopy and fibroblastic and osteoblastic cell cultures. Methods: Ninety-nine discs (5 × 2 mm) were manufactured in titanium grade IV and received different surface treatments: (i) Mach group: machined; (ii) AA group: double acid etch; and (iii) AN group: anodizing treatment. Three discs from each group were analyzed by Scanning Electron Microscopy (SEM) to obtain surface topography images and qualitatively analyzed by EDS. Balb/c 3T3 fibroblasts and pre-osteoblastic cells (MC3T3-E1 lineage) were used to investigate each group's biological response (n = 10/cellular type). The data were compared statistically using the ANOVA one-way test, considered as a statistically significant difference p < 0.05. Results: The AA group had numerous micropores with diameters between 5 and 10 µm, while nanopores between 1 and 5 nm were measured in the AN group. The EDX spectrum showed a high titanium concentration in all the analyzed samples. The contact angle and wetting tension were higher in the AA, whereas similar results were observed for the other groups. A lower result was observed for base width in the AA, which was higher in the other two groups. The AN showed the best values in the fibroblast cells, followed by Mach and AA; whereas, in the culture of the MC3T3 cells, the result was precisely the opposite (AA > Mach > AN). There was similar behavior for cell adhesion for the test groups (Mach and AN), with greater adhesion of Balb/c 3T3 fibroblasts compared to MC3T3 cells; in the AA group, there was greater adherence for MC3T3 cells compared to Balb/c 3T3 fibroblasts. Conclusions: The findings suggest that different surface characteristics can produce different biological responses, possibly cell-line dependent. These findings have important implications for the design of implantable medical devices, where the surface characteristics can significantly impact its biocompatibility.

RESUMEN

OBJECTIVE: To evaluate the osseointegration of implants with hydrophobic (HFB) and hydrophilic (HFL) surfaces in a murine model of high-dose bisphosphonates (BPs). MATERIALS AND METHODS: Sixty-four rats were randomly allocated into four groups: control group with HFB implants (CG-HFB), control group with HFL implants (CG-HFL), BP group with HFB implants (BP-HFB), and BP group with HFL implants (BP-HFL). Animals were euthanized after 15 and 45 days (n=8). The dependent variables assessed were the removal torque (biomechanical analysis), the bone volume around the implants (%BV/TV) (microtomographic analysis), the bone-implant contact (%BIC), the bone between the threads (%BBT) (histomorphometric analysis), and the expression of bone metabolism markers (immunohistochemistry analysis). RESULTS: The CG-HFL and BP-HFL groups presented higher removal torque than the CG-HFB and BP-HFB implants. The %BIC of the CG-HFL surfaces was slightly higher than that of the CG-HFB implants. The BP-HFB and BP-HFL groups presented a higher %BIC than that of the CG-HFB and CG-HFL groups (p<0.001). BP therapy also increased the %BBT at both implant surfaces. Higher levels of ALP were observed in the matrix region of bone tissue on the HFL surfaces than on the HFB surfaces. CONCLUSION: Both surfaces enable osseointegration in rats under BP therapy. CLINICAL RELEVANCE: The study demonstrates that hydrophobic (HFB) and hydrophilic (HFL) implant surfaces can promote osseointegration in rats undergoing bisphosphonate therapy. The HFL surfaces exhibited improved biomechanical performance, higher bone-implant contact, and increased bone volume, suggesting their potential clinical relevance for implant success in individuals on bisphosphonate treatment.

Asunto(s)

RESUMEN

Abstract Objective: To evaluate the effect of different pressures of an oral irrigation device (OID) and the irrigation solution type on the surface roughness of the giomer restorative material. Material and Methods: In this in vitro study, disk-shaped giomer samples were fabricated and assigned to 5 groups (n=23): Group 1, storage in distilled water (control); Group 2, OID #7 pressure/ water; Group 3, OID #10 pressure/ water; Group 4, OID #7 pressure/ 0.05% CHX; Group 5, OID #10 pressure/ 0.05% CHX. The samples' treatment simulated a one-year application of OID. Surface roughness (Ra) and topography of the giomer were evaluated using profilometry and scanning electron microscopy. The data were analyzed with Paired t-test, Tukey, and ANOVA tests (α=0.05). Results: The Ra of the samples increased significantly after treatment with OID (p<0.001). The roughness increase in groups with a pressure of 10 was higher than those with a pressure of 7 (p<0.001). The effect of pressure on surface changes was significant (p<0.001). However, the solution type and the cumulative effect of these two factors were insignificant (p=0.08 and p=0.43, respectively). Conclusion: Oral irrigation device with both solutions significantly increased the surface roughness and topographic changes of the giomer. The severity of these changes was related to the device's pressure.

Asunto(s)

RESUMEN

Abstract This study analyzed the physical-chemical properties of bioactive ionomer materials. Cention N bioactive materials were evaluated chemically activated (CN) and light-cured (CN-LC), Equia Forte Fill (EQUI); conventional resin composite Filtek Z350 XT (Z350); resin glass ionomer cement Riva light Cure (RIVA) and flowable resin composite Filtek Bulk Fill Flow (BULK-F) were evaluated. Sixty specimens (n=10) were prepared for sorption (SR), solubility (SL), flexural strength (FS), shrinkage stress (SS), conversion degree (CD), microhardness (MI), and surface roughness (SR) tests. Non-cured and light-cured materials were assessed on FTIR. 30 human molar teeth were used in the bond strength test (BS). Data were subjected to ANOVA and post-hoc Tukey's test (5% of significance). EQUI showed more sorption in SR and no statistical difference from RIVA and CN-LC. CN group showed more solubility and EQUI presented less (p<0.05). BULK-F showed higher FS (MPa), without differences from CN and Z350, whereas EQUI presented the lowest FS not differing from RIVA. BULK-F and CN-LC showed more shrinkage stress differing from EQUI. CN-LC and CN showed higher CD differing from the other which showed no differences (p>0.05) between them. EQUI showed the highest hardness (p<0.05) in MI. There were no differences (p>0.05) in SR (µm). Z350 and BULK-F presented higher BS, whereas CN-LC showed the lowest, although not differing from EQUI and RIVA. Equia Forte's solubility and microhardness make it a good alternative as a restorative material. Cention N degree of conversion and flexural strength making it an esthetic option to amalgam.

Resumo Este estudo analisou as propriedades físico-químicas dos materiais de ionômero bioativo. Os materiais bioativos Cention N quimicamente ativados (CN) e fotopolimerizados (CN-LC), Equia Forte Fill (EQUI); resina composta convencional Filtek Z350 XT (Z350); resina de ionômero de vidro Riva light Cure (RIVA) e resina composta fluida Filtek Bulk Fill Flow (BULK-F) foram avaliados. Sessenta espécimes (n=10) foram preparados para testes de sorção (SR), solubilidade (SL), resistência à flexão (FS), tensão de contração (SS), grau de conversão (CD), microdureza (MI) e rugosidade da superfície (SR). Os materiais não curados e curados com luz foram avaliados por FTIR. 30 dentes molares humanos foram usados no teste de resistência de união (BS). Os dados foram submetidos a ANOVA e teste de post-hoc Tukey (5% de significância). O EQUI apresentou maior sorção no SR e não mostrou diferença estatística em relação aos grupos RIVA e CN-LC. O grupo CN apresentou maior solubilidade e o EQUI apresentou menor (p<0,05). O BULK-F apresentou maior FS (MPa), sem diferir do CN e do Z350, enquanto o EQUI apresentou o menor FS, não diferindo do RIVA. O BULK-F e o CN-LC apresentaram maior estresse de contração, diferindo do EQUI. O CN-LC e o CN apresentaram maior CD (%), diferindo dos demais, que não apresentaram diferenças (p>0,05) entre si. A EQUI apresentou a maior dureza (p<0,05) no MI. Não houve diferenças (p>0,05) na SR (µm). Z350 and BULK-F apresentaram BS, enquanto a CN-LC apresentou a menor, embora não diferindo da EQUI e da RIVA. A solubilidade e a microdureza do Equia Forte o tornam uma boa alternativa como material restaurador. O grau de conversão e a resistência à flexão do Cention N o tornam uma opção estética ao amálgama.

RESUMEN

Abstract The aim of this study was to evaluate the wettability and adhesion of self-organized TiO2 nanotubes formed on the surface of 8 commercially pure titanium (CP-Ti) disks and 12 dental implants (n = 12) by anodization in a glycerol-H2O (50-50 v/v) electrolyte containing NH4F. Two disk specimens were not submitted to anodization (controls). The nanotubes thus obtained had average dimensions of 50 nm in diameter by 900 nm in length. The treated disk specimens were stored for 2, 14 and 35 days (n = 2), and the wettability of their surfaces was evaluated with a goniometer at the end of each storing period. The adhesion of nanotubes to titanium was evaluated by field emission scanning electron microscopy after subjecting the 12 implants to a simulation of clinical stress in two-part synthetic bone blocks. After installing the implants with the application of an insertion torque, the two halves of the block were separated, and the implants were removed. The nanotubes remained adhered to the substrate, with no apparent deformation. The contact angles after 14 days and 35 days were 16.47° and 17.97°, respectively, values significantly higher than that observed at 2 days, which was 9.24° (p < 0.05). It was concluded that the method of anodic oxidation tested promoted the formation of a surface suitable for clinical use, containing nanotubes with levels of wettability and adhesion to titanium compatible with those obtained by other methods found in the literature. The wettability, however, did not prove stable over the tested storage periods.

RESUMEN

Objetivo: Avaliar o efeito de dois métodos de profilaxia sobre a rugosidade superficial de diferentes resinas compostas. Materiais e Métodos: Dez amostras (7 mm x 2 mm) foram confeccionadas para cada resina testada: MH - resina microhíbrida (viscosidade regular - Opallis); NH ­ resina nanohíbrida (viscosidade regular - Vittra APS); BF ­ resina bulk fill (alta viscosidade - Opus Bulk Fill); MHF ­ resina fluida microhíbrida (Opallis flow); e OS ­ resina nanohíbrida camaleão (viscosidade regular - Vittra Unique). Os valores iniciais de rugosidade (Rai) foram obtidos para cada amostra e então subdivididas em dois grupos (n = 5) seguindo o método de profilaxia: SB ­ jato de bicarbonato de sódio (125µm, 30 s, 10 mm de distância, 2 bar); e PP ­ profilaxia com pasta de pedra-pomes e escova rotatória (30 s, 3000 rpm e pressão de 150 g). Após, uma nova medida de Ra (Raf) foi obtida, e a diferença calculada (ΔRa). Os dados foram analisados pelo teste ANOVA três fatores e teste de Bonferroni, e a diferença de rugosidade (ΔRa) pelo teste Anova dois fatores e teste de Tukey (p<0,05). Resultados: MHF apresentou maior rugosidade após profilaxia com jato de bicarbonato, enquanto para NH a abrasão com pedra pomes foi mais deletéria. Para os demais grupos não houve diferença. Discussão: A alteração na rugosidade promovida pela profilaxia é material-dependente. Conclusão: A profilaxia profissional com jato de bicarbonato ou abrasão com pedra-pomes induziu alterações na rugosidade das resinas.

Aim: This study evaluated the effect of two prophylaxis methods over the surface roughness of different resin composites. Materials and Methods: Ten disc-shaped specimens (7 mm x 2 mm) were made for each composite tested: MH - microhybrid composite with regular viscosity (Opallis); NH ­ nanohybrid composite with regular viscosity (Vittra APS); BF ­ high-viscosity bulk fill composite (Opus Bulk Fill); MHF - microhybrid flowable composite (Opallis flow); and OS ­ nanohybrid one-shade composite with regular viscosity (Vittra Unique). Initial roughness (Ra) values were obtained from each sample, and then they were divided into two groups (n = 5) following the prophylaxis method: SB ­ prophylaxis with sodium bicarbonate powder (125µm grain) using an air-powder polishing device (30 s application distanced 10 mm with 2 bar); and PP ­ prophylaxis with pumice paste and rotatory brush (30 s, 3000 rpm and pressure of 150 g). After that, a new Ra measurement (Raf) was obtained, and the difference was calculated (ΔRa). Data were compared using Three-way ANOVA followed by Bonferroni teste and the Ra difference (ΔRa) was analyzed by Two-way ANOVA followed by the Tukey test (p<0.05). Results: MHF presented higher Ra values after receiving prophylaxis with SB, while for NH, the abrasion with pumice increased the Ra, and for the other groups, no differences were found. Discussion: Alteration promoted by prophylaxis is material dependent. Conclusion: Professional prophylaxis with a bicarbonate jet or abrasion with pumice-based paste can induce changes in the composites' roughness.

Asunto(s)

RESUMEN

Objetivo: Avaliar o efeito de dois métodos de profilaxia sobre a rugosidade superficial de diferentes resinas compostas. Materiais e Métodos: Dez amostras (7 mm x 2 mm) foram confeccionadas para cada resina testada: MH - resina microhíbrida (viscosidade regular - Opallis); NH ­ resina nanohíbrida (viscosidade regular - Vittra APS); BF ­ resina bulk fill (alta viscosidade - Opus Bulk Fill); MHF ­ resina fluida microhíbrida (Opallis flow); e OS ­ resina nanohíbrida camaleão (viscosidade regular - Vittra Unique). Os valores iniciais de rugosidade (Rai) foram obtidos para cada amostra e então subdivididas em dois grupos (n = 5) seguindo o método de profilaxia: SB ­ jato de bicarbonato de sódio (125µm, 30 s, 10 mm de distância, 2 bar); e PP ­ profilaxia com pasta de pedra-pomes e escova rotatória (30 s, 3000 rpm e pressão de 150 g). Após, uma nova medida de Ra (Raf) foi obtida, e a diferença calculada (ΔRa). Os dados foram analisados pelo teste ANOVA três fatores e teste de Bonferroni, e a diferença de rugosidade (ΔRa) pelo teste Anova dois fatores e teste de Tukey (p<0,05). Resultados: MHF apresentou maior rugosidade após profilaxia com jato de bicarbonato, enquanto para NH a abrasão com pedra pomes foi mais deletéria. Para os demais grupos não houve diferença. Discussão: A alteração na rugosidade promovida pela profilaxia é material-dependente. Conclusão: A profilaxia profissional com jato de bicarbonato ou abrasão com pedra-pomes induziu alterações na rugosidade das resinas.

Aim: This study evaluated the effect of two prophylaxis methods over the surface roughness of different resin composites. Materials and Methods: Ten disc-shaped specimens (7 mm x 2 mm) were made for each composite tested: MH - microhybrid composite with regular viscosity (Opallis); NH ­ nanohybrid composite with regular viscosity (Vittra APS); BF ­ high-viscosity bulk fill composite (Opus Bulk Fill); MHF - microhybrid flowable composite (Opallis flow); and OS ­ nanohybrid one-shade composite with regular viscosity (Vittra Unique). Initial roughness (Ra) values were obtained from each sample, and then they were divided into two groups (n = 5) following the prophylaxis method: SB ­ prophylaxis with sodium bicarbonate powder (125µm grain) using an air-powder polishing device (30 s application distanced 10 mm with 2 bar); and PP ­ prophylaxis with pumice paste and rotatory brush (30 s, 3000 rpm and pressure of 150 g). After that, a new Ra measurement (Raf) was obtained, and the difference was calculated (ΔRa). Data were compared using Three-way ANOVA followed by Bonferroni teste and the Ra difference (ΔRa) was analyzed by Two-way ANOVA followed by the Tukey test (p<0.05). Results: MHF presented higher Ra values after receiving prophylaxis with SB, while for NH, the abrasion with pumice increased the Ra, and for the other groups, no differences were found. Discussion: Alteration promoted by prophylaxis is material dependent. Conclusion: Professional prophylaxis with a bicarbonate jet or abrasion with pumice-based paste can induce changes in the composites' roughness.

RESUMEN

PURPOSE: To evaluate the effects of 1 versus 2 glaze firings on the color and mechanical properties of an extrinsically characterized lithium disilicate ceramic after thermal cycling, brushing, or both. MATERIALS AND METHODS: Eighty specimens were divided into 2 groups: 1 glaze firing (GL1) and 2 glaze firings (GL2). Each group was subdivided into 4 groups (n = 10), according to the experimental conditions: thermal-cycling, brushing, thermal-cycling + brushing, and immersion in distilled water (control). Color variation, surface roughness, and Vickers microhardness were analyzed before each designated experiment and after the simulated periods of 2.5, 5, and 10 years. Three-way mixed ANOVA was used for all outcomes, followed by 1-way ANOVA, repeated measures 1-way ANOVA, Bonferroni post hoc test, and t-test to check for statistical differences (α = 0.05). RESULTS: Thermal cycling generated greater color changes in the GL1 group at 2.5 and 5 years (p < 0.001; p = 0.013). Brushing generated color changes in GL1 at 5 years (p = 0.003) and in GL2 at 10 years (p = 0.017). Regarding surface roughness, the GL1 group suffered alterations in thermal cycling + brushing at 5 years. In the control group, the GL1 group exhibited higher roughness values than GL2 (p < 0.05). Most of the groups experienced an increase in microhardness at 2.5 years (p < 0.05). In the GL1 group, thermal-cycling increased the microhardness at 5 years (p = 0.006); at 5 and 10 years, the GL1 group had a higher microhardness than the GL2 in thermal-cycling + brushing (p < 0.05). CONCLUSION: Ceramics with 1 glaze firing showed greater color, roughness, and microhardness changes compared to those submitted to 2 firings.

RESUMEN

BACKGROUND: Elastomeric chains promote controlled movements and are widely used in orthodontics. OBJECTIVES: The aim of the study was to evaluate the force decay and elongation of orthodontic chains exposed to low-pH saliva (pH = 4) and different beverages common in the diet. MATERIAL AND METHODS: Force decay and elongation were determined in vitro at 6 time intervals over 21 days for 2 commercial elastomeric chains - Ormco (group A) and Borgatta (group B). The samples were immersed in artificial saliva (AS) at pH 4, Coca-Cola®, coffee, or beer for 15 min every day, or in AS (the control group). For the remaining time, the chains were placed into AS at 37°C. In addition, microscopic qualitative changes were recorded by means of scanning electron microscopy (SEM). RESULTS: The group B chains showed higher force decay and elongation at the end of the follow-up as compared to the group A chains. Exposure to beer had a greater impact on the force decay and elongation of the chains as compared to other liquids, but it was not statistically significant. The group A chains showed a more irregular surface than the group B chains, in particular, those exposed to coffee. CONCLUSIONS: Elastomeric chains suffer force decay and elongation as a function of time, mainly in the first 24 h. At the end of the follow-up, the group A chains exhibited less force decay in comparison with the group B chains. The qualitative observations showed that the chains in group A had a more irregular surface than the chains in group B.

Asunto(s)

RESUMEN

Abstract The present study evaluated the influence of carvacrol, terpinene-4-ol, and chlorhexidine on the physical-chemical properties of titanium surfaces, cell viability, proliferation, adhesion, and spreading of fibroblasts and osteoblasts in vitro. Titanium surfaces (Ti) were treated with Carvacrol (Cvc), Terpinen-4-ol (T4ol), Chlorhexidine (CHX), DMSO, and ultrapure water (Control group). Physical-chemical modifications were evaluated by surface wettability, the surface free energy (SFE) calculated from the contact angle values using the Owens-Wendt-Rabel-Kaeble (OWRK) equation, scanning electron microscopy (SEM) and energy dispersive spectrometry probe (EDS) system. Cells were seeded onto Ti-treated surfaces and incubated for 24 h and 72 h, then evaluated by Alamar blue assay and fluorescence microscopy. Surfaces treated with Cvc and T4ol showed the presence of Na, O, and Cl. All surfaces showed hydrophilic characteristics and SFE values between 5.5 mN/m and 3.4 mN/m. On the other hand, EDS peaks demonstrated the presence of O and Cl after CHX treatment. A reduction of cell viability and adhesion was noted on titanium surfaces treated with CHX after 24 and 72h. In conclusion, the results indicate that the decontamination with Cvc and T4ol on Ti surfaces does not alter the surface proprieties and allows an adequate interaction with cells involved in the re-osseointegration process such as fibroblasts and osteoblasts.

Resumo O presente estudo avaliou a influência do carvacrol, terpineno-4-ol e clorexidina nas propriedades físico-químicas de superfícies de titânio, viabilidade celular, proliferação, adesão e esplhamento de fibroblastos e osteoblastos in vitro. Superfícies de titânio (Ti) foram tratadas com Carvacrol (Cvc), Terpinen-4-ol (T4ol), Clorexidina (CHX), DMSO e água ultrapura (Grupo Controle). As modificações físico-químicas foram avaliadas pela molhabilidade da superfície, a energia livre de superfície (ELS) calculada a partir dos valores do ângulo de contato usando a equação de Owens-Wendt-Rabel-Kaeble (OWRK), microscopia eletrônica de varredura (MEV) e espectroscopia de raios X por energia dispersiva (EDS). As células foram semeadas em superfícies tratadas com Ti e incubadas por 24 h e 72 h, e avaliadas pelo ensaio Alamar blue e microscopia de fluorescência. As superfícies tratadas com Cvc e T4ol mostraram a presença de Na, O e Cl. Todas as superfícies apresentaram características hidrofílicas e valores de ELS entre 5,5 mN/m e 3,4 mN/m. Por outro lado, os picos de EDS demonstraram a presença de O e Cl após o tratamento com CHX. Uma redução da viabilidade celular e adesão foi observada em superfícies de titânio tratadas com CHX após 24 e 72h. Em conclusão, os resultados indicam que a descontaminação com Cvc e T4ol em superfícies de Ti não altera as propriedades da superfície e permite uma interação adequada com células envolvidas no processo de reosseointegração como fibroblastos e osteoblastos.

RESUMEN

The aim of this study was to verify the effect of finishing and polishing procedures and glaze application on biaxial strength and surface properties of milled feldspathic ceramic blocks. Forty disc-shaped samples (14 mm diameter, 1.2 mm thickness) were divided in four groups (n = 10): C (control): no finishing and polishing; FP: finishing and polishing; G: glaze; and GFP: finishing and polishing + glaze. The specimens were subject to surface gloss (glossmeter) and roughness (profilometer) tests followed by biaxial flexural strength (universal testing machine) and Vickers hardness (microhardness tester) tests. The surface morphological analysis was performed by scanning electron microscopy (n = 3). Data were submitted to normality tests with Shapiro-Wilk, and one-way ANOVA followed by Tukey's post hoc test (α = 0.05). Group C showed the lowest gloss. For the hardness test, groups C, FP, and GFP obtained the highest values without significant differences between them. Regarding the biaxial strength test, group C showed the lowest mean value. Both finishing and polishing methods (FP and GFP) showed surface properties similar or better than the control, and with higher biaxial strength.

Asunto(s)

RESUMEN

Color stability is among the most frequent causes of restoration failures, and influences surface properties. Aim: The aim of this study was to investigate the influence of pigment solutions on low-shrinkage and conventional composites regarding changes in the physical properties of composite surfaces. Materials and Method: Specimens of four composites (Filtek Z350 XT, Point 4, N'Durance and Venus Diamond) were randomly distributed into three groups to be submitted to each of three pigment solutions (red wine, tomato sauce and coffee) in fifteen-minute daily cycles, for twenty-eight days. There were 12 groups altogether (n = 10). Color, surface roughness and hardness tests were performed. Statistical analysis includedAnalysis of variance (ANOVA) and Tukey's significance test (a = 0.05). Results: Color changes caused by the solutions did not differ significantly among Filtek Z350 XT, Venus Diamond and N'Durance. Hardness decreased significantly in Filtek Z350 XT and Venus Diamond after chemical challenge with each solution. For the composite independent factor, roughness was highest in Venus Diamond, followed by Filtek Z350 XT, Point 4 and N'Durance. Conclusions: Treatment with different pigment solutions (red wine, tomato sauce or coffee) increased stainability and decreased hardness of both low-shrinkage and conventional composites, while roughness was unaffected.

A estabilidade de cor está entre as causas mais frequentes de falhas de restauragoes, que também influenciam suas propriedades superficiais. Objetivo: O objetivo do presente estudo foi investigar a influencia de solugoes de pigmentos em compósitos convencionais e de baixa retragao, bem como alteragoes naspropriedades físicas da superficie dos compósitos. Materiais eMétodo: Amostras de cada compósito (Filtek Z350XT, Point 4, N'Durance e Venus Diamond) foram distribuidas aleatoriamente em grupos submetidos a cada solugao pigmentante (vinho tinto, molho de tomate e café) em ciclos diários de quinze minutos, durante vinte e oito dias. Assim, totalizando 12 grupos (n = 10). Foram realizados testes de cor, rugosidade superficial e dureza. A Análise Estatistica foi realizada usando Análise de variáncia (ANOVA) e o teste de significáncia de Tukey (a = 0.05). Resultados: As alteragoes de cor desencadeadas pelas solugoes investigadas nao mostraram diferenga estatisticamente significativa entre os compósitos Filtek Z350 XT, Venus Diamond e N'Durance. Os valores de dureza registrados para Filtek Z350XT e Venus Diamond diminuiram significativamente após o desafio químico com cada uma das solugoes pigmentantes. Para o fator independente compósito, Venus Diamond registrou a maior rugosidade; foi seguido por Filtek Z350XT, Point 4 e N'Durance. Conclusoes: Os tratamentos das amostras com diferentes solugoes pigmentantes (vinho tinto, molho de tomate e café) aumentaram a manchabilidade dos compósitos convencionais e de baixa retragao e diminuiram sua dureza, embora nao tenham afetado a rugosidade dos compósitos.

Asunto(s)

RESUMEN

PURPOSE: This study evaluated the effect of coating traditional and translucent Y-TZP with an industrial nanometric colloidal silica or glaze before or after sintering on the adhesion of zirconia with various ytrria concentration. MATERIALS AND METHODS: Specimens of Y-TZP with 3% and 5% yttria were subdivided into 5 groups (n=10), according to the coating applied and moment of application (before or after Y-TZP sintering): Control (no coating), Colloidal Silica/Sintering, Sintering/Colloidal Silica, Glaze/Sintering, Sintering/ Glaze. Lithium disilicate (LD) was used as positive control. Except for Y-TZP controls, groups were conditioned with silane before cementation with a self-adhesive resin cement. After 24 hours, the shear bond strength and failure analysis were performed. Also, analysis of specimens' surface was accomplished with SEM-EDX. Kruskal-Wallis and Dunn tests were applied to analyze differences between groups (p⟨0.05). RESULTS: Overall, the worst and best values of shear bond strength test were control and glaze after sintering groups. Different morphological and chemical aspects were observed in SEM-EDX analysis. CONCLUSIONS: Coating Y-TZP with colloidal silica showed unsatisfactory results. In 3Y-TZP, the surface treatment associated with the best adhesion values was the application of glaze after zirconia sintering. However, in 5Y-TZP, glaze application can be performed before or after the zirconia sintering to optimize clinical steps.

Asunto(s)

RESUMEN

OBJECTIVE: The aim of the present study was to evaluate the effect of obesity on the osseointegration of implants with hydrophobic and hydrophilic surfaces. MATERIALS AND METHODS: Sixty-four male rats were distributed among four experimental groups: H-HB (Healthy/Hydrophobic): healthy animals with hydrophobic implants; H-HL (Healthy/Hydrophilic): healthy animals with hydrophilic implants; O-HB (Obese/Hydrophobic): animals with induced obesity and hydrophobic implants; O-HL (Obese/Hydrophilic): animals with induced obesity and hydrophilic implants. One hundred and twenty-eight implants were installed in the tibiae of the animals bilaterally (64 on the left tibiae and 64 on the right one) after 75 days of a specific diet (standard or high-fat diet) and euthanasia was performed in the experimental periods of 15 and 45 days after implant placement. Bone formation was assessed by biomechanical analysis (on the left tibiae of each animal), and microtomographic and histomorphometric analyses (on the right tibiae of each animal). Statistical analysis was performed using the Shapiro-Wilk test for normality and ANOVA followed by Tukey test to observe whether there was a significant difference between groups (p < 0.05); the t-test was used to compare the animals' body weight. RESULTS: The biomechanical analysis showed an increase in the removal torque value of animals after 45 days in comparison to after 15 days, with the exception of O-HB groups. The microtomographic analysis demonstrated no significant differences in the mineralized bone tissue volume between the groups. In the histomorphometric analysis, the H-HL/45 day group/period demonstrated higher bone-implant contact, in comparison to H-HL/15 days and the O-HL/45 day group/period showed an increase in bone area between the implant threads, in comparison to O-HL/15 days. CONCLUSION: In conclusion, obesity does not interfere with the osseointegration of hydrophobic and hydrophilic implants.

Asunto(s)

RESUMEN

INTRODUCTION: Peri-implantitis is the leading cause of dental implant loss and is initiated by a polymicrobial dysbiotic biofilm formation on the implant surface. The destruction of peri-implant tissue by the host immune response and the low effectiveness of surgical or non-surgical treatments highlight the need for new strategies to prevent, modulate and/or eliminate biofilm formation on the implant surface. Currently, several surface modifications have been proposed using biomolecules, ions, antimicrobial agents, and topography alterations. AREAS COVERED: Initially, this review provides an overview of the etiopathogenesis and host- and material-dependent modulating factors of peri-implant disease. In addition, a critical discussion about the antimicrobial surface modification mechanisms and techniques employed to modify the titanium implant material is provided. Finally, we also considered the future perspectives on the development of antimicrobial surfaces to narrow the bridge between idea and product and favor the clinical application possibility. EXPERT OPINION: Antimicrobial surface modifications have demonstrated effective results; however, there is no consensus about the best modification strategy and in-depth information on the safety and longevity of the antimicrobial effect. Modified surfaces display recurring challenges such as short-term effectiveness, the burst release of drugs, cytotoxicity, and lack of reusability. Stimulus-responsive surfaces seem to be a promising strategy for a controlled and precise antimicrobial effect, and future research should focus on this technology and study it from models that better mimic clinical conditions.

Asunto(s)