RESUMEN

The development of self-healing materials provides a new opportunity and challenge for advancing triboelectric nanogenerators (TENGs). However, the low strength and low toughness of self-healing triboelectric materials often result in the deformation or breakage of TENG under high mechanical loads, thereby limiting their potential applications. Herein, a new strategy for fabricating self-healing triboelectric materials is reported, which introduces cross-linking networks with hydrogen bonds and metal coordination bonds. The desired high performance can be achieved by simply adjusting the molar ratio of the metal to the ligand. When the molar ratio is 1:2, the tensile strength, toughness, and elongation at break of the material reached 13.7 MPa, 76.9 MJ m-3, and 1321%, respectively. Furthermore, its self-healing efficiency can reach 74% at 70 °C in 6 h. Working in contact-separation mode, the electrical output can reach 164 V, 18.2 µA, 57.5 nC, with a maximum power density of 2.54 W m-2. Notably, even if it is sheared, the electrical output performances of TENG can be completely recovered to the original state. In addition, the developed TENG exhibits excellent output stability over 10 000 contact separation cycles. This study presents a promising approach for the development of stretchable smart generators.

RESUMEN

The high-speed impact-resistanct materials are of great significance while their development is hindered by the intrinsic tradeoff between mechanical strength and energy dissipation capability. Herein, the new chemical system of molecular granular material (MGM) is developed for the design of impact-resistant materials from the supramolecular complexation of sub-nm molecular clusters (MCs) and hyper-branched polyelectrolytes. Their hierarchical aggregation provides the origin of the decoupling of mechanical strengths and structural relaxation dynamics. The MCs' intrinsic fast dynamics afford excellent high-speed impact-resistance, up to 5600 s-1 impact in a typical split-Hopkinson pressure bar test while only tiny boundary cracks can be observed even under 7200 s-1 impact. The high loadings of MCs and their hierarchical aggregates provide high-density sacrificial bonding for the effective dissipation of the impact energy, enabling the protection of fragile devices from the direct impact of over 200 m s-1 bullet. Moreover, the MGMs can be conveniently processed into protective coatings or films with promising recyclability due to the supramolecular interaction feature. The research not only reveals the unique relaxation dynamics and mechanical properties of MGMs in comparison with polymers and colloids, but also develops new chemical systems for the fabrication of high-speed impact-resistant materials.

RESUMEN

Polymer-nanoparticle (PNP) hydrogels are a class of nanocomposite materials showing potential as injectable platforms for biomedical applications. Their design is limited by incomplete knowledge of how the binding motif impacts the viscoelastic properties of the material and is generally constrained to non-responsive supramolecular interactions. Expanding the scope of available interactions and advancing the understanding of how defined interactions influence network formation would accelerate PNP hydrogel design. To address this gap in the design of PNP hydrogels, the study designs and investigates a tunable platform based on beta-cyclodextrin (ßCD) host-guest cross-links between functionalized polymers and nanoparticles. A host-functionalized polymer (ßCD hyaluronic acid) and guest harboring block co-polymer (poly(ethylene glycol)-b-poly(lactic acid)) NPs are synthesized. The presence and accessibility for binding of the host and guest moieties are characterized via isothermal titration calorimetry. PNP hydrogels with varying concentrations of functionalized polymer and NPs reveal a limited window of concentrations for gelation. It is hypothesized that network formation is governed by the capacity of polymer chains to effectively bridge NPs, which is related to the host-guest ratios present in the system. Further, photo-responsive guests are incorporated to engineer photoreversible gelation of PNP hydrogels via exposure to specific wavelengths of light.

RESUMEN

Massive accumulation of postconsumer plastic waste in eco-system has raised growing environmental concerns. Sustainable end-of-life managements of the indispensable plastic are highly demanding and challenging in modern society. To relieve the plastic menace, herein we present a full life cycle sustainable supramolecular bioplastic made from biomass-derived polyelectrolyte (chitosan quaternary ammonium salt, QCS) and natural sodium fatty acid (sodium laurate, SL) through solid-phase molecular self-assembly (SPMSA), by which the QCS-SL complexes, precipitated from mixing the aqueous solutions, self-assemble to form bioplastic film by mildly pressing at room temperature. The QCS-SL bioplastic films display superior hydroplasticity owing to the water-activated molecular rearrangement and electrostatic bond reconstruction, which allows facile self-healing and reprocessing at room temperature to significantly extend the service lifetime of both products and raw materials. With higher water content, the dynamic electrostatic interactions and precipitation-dissolution equilibrium endow the QCS-SL bioplastic films with considerable solubility in water, which is promising to mitigate the plastic accumulation in aquatic environment. Because both QCS and SL are biocompatible and biodegradable, the dissolved QCS-SL films are nontoxic and environmentally friendly. Thus, this novel supramolecular bioplastic is highly sustainable throughout the whole life cycle, which is expected to open a new vista in sustainable plastic materials.

RESUMEN

Polylactide (PLA), a biocompatible and biodegradable polymer, is widely used in diverse biomedical applications. However, the industry standard for converting lactide into PLA involves toxic tin (Sn)-based catalysts. To mitigate the use of these harmful catalysts, other environmentally benign metal-containing agents for efficient lactide polymerization have been studied, but these alternatives are hindered by complex synthesis processes, reactivity issues, and selectivity limitations. To overcome these shortcomings, we explored the catalytic activity of Cu-(Phe)2 and Zn-(Phe)2 metal-amino acid co-assemblies as potential catalysts of the ring-opening polymerization (ROP) of lactide into PLA. Catalytic activity of the assemblies was monitored at different temperatures and solvents using 1H-NMR spectroscopy to determine the catalytic parameters. Notably, Zn-(Phe)2 achieved >99% conversion of lactide to PLA within 12 h in toluene under reflux conditions and was found to have first-order kinetics, whereas Cu-(Phe)2 exhibited significantly lower catalytic activity. Following Zn-(Phe)2-mediated catalysis, the resulting PLA had an average molecular weight of 128 kDa and a dispersity index of 1.25 as determined by gel permeation chromatography. Taken together, our minimalistic approach expands the realm of metal-amino acid-based supramolecular catalytic nanomaterials useful in the ROP of lactide. This advancement shows promise for the future design of simplified biocatalysts in both industrial and biomedical applications.

RESUMEN

The complexity, heterogeneity, and drug resistance of diseases necessitate a shift in therapeutic paradigms from monotherapy to combination therapy, which could augment treatment efficiency. Effective treatment of advanced osteoarthritis (OA) requires addressing three key factors contributing to its deterioration: chronic joint inflammation, lubrication dysfunction, and cartilage-tissue degradation. Herein, we present a supramolecular nanomedicine of multifunctionality via molecular recognition and self-assembly. The employed macrocyclic carrier, zwitterion-modified cavitand (CV-2), not only accurately loads various drugs but also functions as a therapeutic agent with lubricating properties for the treatment of OA. Kartogenin (KGN), a drug for articular cartilage regeneration and protection, and flurbiprofen (FP), an anti-inflammatory agent, were coloaded onto CV-2 assembly, forming a supramolecular nanomedicine KGN&FP@CV-2. The three-in-one combination therapy of KGN&FP@CV-2 addresses the three pathological features for treating OA collectively, and thus provides long-term therapeutic benefits for OA through sustained drug release and intrinsic lubrication in vivo. The multifunctional integration of macrocyclic delivery and therapeutics provides a simple, flexible, and universal platform for the synergistic treatment of diseases involving multiple drugs.

Asunto(s)

RESUMEN

Intravenous thrombolysis with recombinant tissue plasminogen activator (rtPA) is the primary treatment for ischemic stroke. However, rtPA treatment can substantially increase blood-brain barrier (BBB) permeability and susceptibility to hemorrhagic transformation. Herein, the mechanism underlying the side effects of rtPA treatment is investigated and demonstrated that ferroptosis plays an important role. The ferroptosis inhibitor, liproxstatin-1 (Lip) is proposed to alleviate the side effects. A well-designed macrocyclic carrier, glucose-modified azocalix[4]arene (GluAC4A), is prepared to deliver Lip to the ischemic site. GluAC4A bound tightly to Lip and markedly improved its solubility. Glucose, modified at the upper rim of GluAC4A, imparts BBB targeting to the drug delivery system owing to the presence of glucose transporter 1 on the BBB surface. The responsiveness of GluAC4A to hypoxia due to the presence of azo groups enabled the targeted release of Lip at the ischemic site. GluAC4A successfully improved drug accumulation in the brain, and Lip@GluAC4A significantly reduced ferroptosis, BBB leakage, and neurological deficits induced by rtPA in vivo. These findings deepen the understanding of the side effects of rtPA treatment and provide a novel strategy for their effective mitigation, which is of great significance for the treatment and prognosis of patients with ischemic stroke.

Asunto(s)

RESUMEN

Hydrogels have emerged as a new type of wound dressing materials that involved in different stages of the healing processes. However, most of the existing wound dressings mainly offer a protective and moisturizing layer to prevent cross-infection, while the anti-inflammatory and anti-oxidative properties are frequently induced by extra addition of other bioactive molecules. Here, a novel type of sulfated glyco-functionalized hydrogels for wound dressing was prepared through the hybrid supramolecular co-assembly of carbohydrate segments (FG, FGS and FG3S), fluorenylmethoxycarbonyl-diphenylalanine (Fmoc-FF), and diphenylalanine-dopamine (FFD). Implanting sulfated carbohydrates can mimic the structure of glycosaminoglycans (GAGs), promoting cell proliferation and migration, along with anti-inflammatory effects. In situ polymerization of FFD introduced a secondary covalent network to the hydrogel, meanwhile, providing anti-oxidation and adhesion properties to wound surfaces. Furthermore, the dynamic supramolecular interactions within the hydrogels also confer self-healing capabilities to the wound dressing materials. In vivo experiments further demonstrated significantly accelerated healing rates with the multifunctional hydrogel FG3S-FFD, indicating high application potential.

Asunto(s)

RESUMEN

The exploitation of novel wound healing methods with real-time infection sensing and high spatiotemporal precision is highly important for human health. Pt-based metal-organic cycles/cages (MOCs) have been employed as multifunctional antibacterial agents due to their superior Pt-related therapeutic efficiency, various functional subunits and specific geometries. However, how to rationally apply these nanoscale MOCs on the macroscale with controllable therapeutic output is still challenging. Here, a centimeter-scale Pt MOC film was constructed via multistage assembly and subsequently coated on a N,N'-dimethylated dipyridinium thiazolo[5,4-d]thiazole (MPT)-stained silk fabric to form a smart wound dressing for bacterial sensing and wound healing. The MPT on silk fabric could be used to monitor wound infection in real-time through the bacteria-mediated reduction of MPT to its radical form via a color change. The MPT radical also exhibited an excellent photothermal effect under 660 nm light irradiation, which could not only be applied for photothermal therapy but also induce the disassembly of the Pt MOC film suprastructure. The highly ordered Pt MOC film suprastructure exhibited high biosafety, while it also showed improved antibacterial efficiency after thermally induced disassembly. In vitro and in vivo studies revealed that the combination of the Pt MOC film and MPT-stained silk can provide real-time information on wound infection for timely treatment through noninvasive techniques. This study paves the way for bacterial sensing and wound healing with centimeter-scale metal-organic materials.

Asunto(s)

RESUMEN

Most supramolecular systems were discovered by using a trial-and-error approach, leading to numerous synthetic efforts to obtain optimal supramolecular building blocks for selective guest encapsulation. Here, we report a simple coassembly strategy for preparing tamoxifen-selective supramolecular nanomaterials in an aqueous solution. The synthetic amphiphile molecule, 1,1,2,2-tetraphenylethylene (TPE), promotes large tamoxifen aggregate disassembly into smaller, discrete aggregates such as ribbon-like and micellar assemblies in coassembled solutions, enhancing the solubility and dispersion. The TPE moiety exhibits enhanced emission upon tamoxifen interaction, enabling the observation of the coassembled species in an aqueous solution for cell imaging. The tamoxifen-selective fluorescent micelles in the presence of a 1:1 molar ratio of TPE derivative with tamoxifen show enhanced tamoxifen absorption and anticancer effects against MCF-7 breast cancer cells. These supramolecular approaches, based on the coassembly of building blocks with molecular structural similarity, can provide a novel strategy for the efficient development of selective molecular carriers with enhanced biological activities.

Asunto(s)

RESUMEN

Covering an exceptionally wide range of bond strengths, the dynamic nature and facile tunability of dative B-N bonds is highly attractive when it comes to the assembly of supramolecular polymers and materials. This Minireview offers an overview of advances in the development of functional materials where Lewis pairs (LPs) play a key role in their assembly and critically influence their properties. Specifically, we describe the reversible assembly of linear polymers with interesting optical, electronic and catalytic properties, discrete macrocycles and molecular cages that take up diverse guest molecules and undergo structural changes triggered by external stimuli, covalent organic frameworks (COFs) with intriguing interlocked structures that can embed and separate gases such as CO2 and acetylene, and soft polymer networks that serve as recyclable, self-healing, and responsive thermosets, gels and elastomeric materials.

RESUMEN

Designing supramolecular hydrogels using short peptides is challenging. To control self-assembly, a certain amount of organic solvent is typically added to the system, or the short peptide is modified with a functional group that is hydrophobic, hydrophilic, or highly coordinative. We discovered that l-His-l-Ile-l-Thr (HIT), a very short unmodified "native" tripeptide, selectively responds to Cu2+ ions in pure water to form a transparent supramolecular metallohydrogel. Circular dichroism analysis revealed that Cu2+ ions, but no other metal species, caused HIT to change from a random-coil-like to a ß-sheet-like structure. Other spectroscopic methods were used to characterize the properties of the supramolecular metallohydrogel. These results are expected to facilitate the development of native short peptides as advanced functional biomaterials.

Asunto(s)

RESUMEN

Supramolecular polymers have attracted increasing attention in recent years due to their perfect combination of supramolecular chemistry and traditional polymer chemistry. The design and synthesis of macrocycles have driven the rapid development of supramolecular chemistry and polymer science. Pillar[n]arenes, a new generation of macrocyclic compounds possessing unique pillar-shaped structures, nano-sized cavities, multi-functionalized groups, and excellent host-guest complexation abilities, are promising candidates to construct supramolecular polymer materials with enhanced properties and functionalities. This review summarizes recent progress in the design and synthesis of pillararene-based supramolecular polymers (PSPs) and illustrates their diverse applications as adsorption and separation materials. All performances are evaluated and analyzed in terms of efficiency, selectivity, and recyclability. Typically, PSPs can be categorized into three typical types according to their topologies, including linear, cross-linked, and hybrid structures. The advances made in the area of functional supramolecular polymeric adsorbents formed by new pillararene derivatives are also described in detail. Finally, the remaining challenges and future perspectives of PSPs for separation-based materials science are discussed. This review will inspire researchers in different fields and stimulate creative designs of supramolecular polymeric materials based on pillararenes and other macrocycles for effective adsorption and separation of a variety of targets.

RESUMEN

Extremely low hysteresis, high mechanical strength, superior toughness, and excellent healability are essential for stretchable ionic conductors to enhance their reliability and meet for cutting-edge applications. However, the fabrication of stretchable ionic conductors with such mutually exclusive properties remains challenging. Herein, extremely low-hysteresis and healable ionic conductors with a tensile strength of ≈8.9 MPa and toughness of ≈23.2 MJ m-3 are fabricated through the complexation of 4-carboxybenzaldehyde (CBA) grafted poly(vinyl alcohol) (PVA) (denoted as PVA-CBA) and poly (allylamine hydrochloride) (PAH) followed by acidification and ion-loading steps. The acidification step generates the PVA-CBA/PAH ionic conductors with in situ formed dynamic hydrophobic domains that lock and stabilize noncovalent interactions. This significantly minimizes the energy dissipation of the ionic conductors during cyclic mechanical loading (≤200% strain), resulting in ionic conductors with extremely low hysteresis (≈5%). The fractured ionic conductors can be healed at 60 °C to restore their original properties. Because of the extremely low hysteresis, the PVA-CBA/PAH ionic conductors show a highly stable and reproducible electrical response over 5000 uninterrupted loading-unloading cycles at a strain of 200%. The ionic conductor based sensors exhibit a high sensitivity to a wide range of strains (1-500%).

RESUMEN

Stimuli responsive viscosity modifiers entail an important class of materials which allow for smart material formation utilizing various stimuli for switching such as pH, temperature, light and salinity. They have seen applications in the biomedical space including tissue engineering and drug delivery, wherein stimuli responsive hydrogels and polymeric vessels have been extensively applied. Applications have also been seen in other domains like the energy sector and automobile industry, in technologies such as enhanced oil recovery. The chemistry and microstructural arrangements of the aqueous morphologies of dissolved materials are usually sensitive to the aforementioned stimuli which subsequently results in rheological sensitivity as well. Herein, we overview different structures capable of viscosity modification as well as go over the rheological theory associated with classical systems studied in literature. A detailed analysis allows us to explore correlations between commonly discussed models such as molecular packing parameter, tube reptation and stress relaxation with structural and rheological changes. We then present five primary mechanisms corresponding to stimuli responsive viscosity modification: (i) packing parameter modification via functional group conditioning and (ii) via dynamic bond formation, (iii) mesh formation by interlinking of network nodes, (iv) viscosity modification by chain conformation changes and (v) viscosity modification by particle jamming. We also overview several recent examples from literature that employ the concepts discussed to create novel classes of intriguing stimuli responsive structures and their corresponding rheological properties. Furthermore, we also explore systems that are responsive to multiple stimuli which can provide enhanced functionality and versatility by providing multi-level and precise actuation. Such systems have been used for programmed site-specific drug delivery.

RESUMEN

Living organisms are capable of dynamically changing their structures for adaptive functions through sophisticated reaction-diffusion processes. Here we show how active supramolecular hydrogels with programmable lifetimes and macroscopic structures can be created by relying on a simple reaction-diffusion strategy. Two hydrogel precursors (poly(acrylic acid) PAA/CaCl2 and Na2 CO3 ) diffuse from different locations and generate amorphous calcium carbonate (ACC) nanoparticles at the diffusional fronts, leading to the formation of hydrogel structures driven by electrostatic interactions between PAA and ACC nanoparticles. Interestingly, the formed hydrogels are capable of autonomously disintegrating over time because of a delayed influx of electrostatic-interaction inhibitors (NaCl). The hydrogel growth process is well explained by a reaction-diffusion model which offers a theoretical means to program the dynamic growth of structured hydrogels. Furthermore, we demonstrate a conceptual access to dynamic information storage in soft materials using the developed reaction-diffusion strategy. This work may serve as a starting point for the development of life-like materials with adaptive structures and functionalities.

RESUMEN

Although advances have been made in carbohydrate-based macromolecular self-assembly, harnessing epimers of carbohydrates to perform molecular assembly and further investigating the properties of supramolecular materials remain little explored. Herein, two classes of stereoisomeric glycolipid amphiphiles based on d-N-acetylgalactosamine (GalNAc) are reported, and they can aggregate into ribbon-like structures in the aqueous solution due to amphiphilic property, which allow to obtain glycocalyx-mimicking supramolecular materials. The subtle distinction in glycoside configuration of GalNAc-α-SSA and GalNAc-ß-SSA dictates the different molecular packing in self-assembled structures. Since driven by the distinguishing carbohydrate-carbohydrate interactions, the ribbon-like architectures transform into spherical nanostructures via mixing GalNAc-α-SSA and GalNAc-ß-SSA. The resulting spherical micelles fabricated by blending glycolipid epimers can potentiate the macrophage- and dendritic cell-mediated immune responses in vitro. Such glycolipid epimers will pave the way to create glycocalyx-mimicking immune modulators by incorporating stereochemistry into supramolecular self-assembly.

Asunto(s)

RESUMEN

Azobenzene-containing small molecules and polymers are functional photoswitchable molecules to form supramolecular nanomaterials for various applications. Recently, supramolecular nanomaterials have received enormous attention in material science because of their simple bottom-up synthesis approach, understandable mechanisms and structural features, and batch-to-batch reproducibility. Azobenzene is a light-responsive functional moiety in the molecular design of small molecules and polymers and is used to switch the photophysical properties of supramolecular nanomaterials. Herein, we review the latest literature on supramolecular nano- and micro-materials formed from azobenzene-containing small molecules and polymers through the combinatorial effect of weak molecular interactions. Different classes including complex coacervates, host-guest systems, co-assembled, and self-assembled supramolecular materials, where azobenzene is an essential moiety in small molecules, and photophysical properties are discussed. Afterward, azobenzene-containing polymers-based supramolecular photoresponsive materials formed through the host-guest approach, polymerization-induced self-assembly, and post-polymerization assembly techniques are highlighted. In addition to this, the applications of photoswitchable supramolecular materials in pH sensing, and CO2 capture are presented. In the end, the conclusion and future perspective of azobenzene-based supramolecular materials for molecular assembly design, and applications are given.

RESUMEN

Stimuli-responsive supramolecular materials have promising biological applications because of their ability to rapidly undergo significant structural changes in response to diverse stimuli. Herein, supramolecular sheets assembled via charge-transfer interactions between the pyrene moiety of a d-mannose-containing amphiphile and 7,7,8,8-tetracyanoquinodimethane (TCNQ) are reported. The supramolecular sheets show reduction-responsive behavior, in which their disassembly is triggered by the reduction of TCNQ by sodium sulfide. In an anaerobic environment, the sheet structure remains intact and the exposed d-mannose moieties induce the agglutination of facultative anaerobes, thereby inhibiting bacterial growth. In contrast, in an aerobic environment, the reduction of TCNQ by the hydrogen sulfide generated by facultative anaerobes causes sheet disassembly. This enables continuous bacterial growth, because the collapsed sheets cannot induce agglutination. Thus, this study presents a novel supramolecular material for the selective regulation of facultative anaerobe growth according to the external environment.

Asunto(s)

RESUMEN

Glucocorticoid-based creams are commonly used for treatments of psoriatic skin lesions while showing poor permeation because the thickened stratum corneum severely limits drug absorption. Although dissolving microneedle (DMN) patches have been employed in treating skin disease by virtue of their direct target to the lesion site, conventional DMN patches are generally fabricated from the water-soluble matrix, making them difficult to efficiently encapsulate hydrophobic glucocorticoids. Here, we develop a mechanically robust supramolecular DMN composed of hydroxypropyl ß-cyclodextrin (HPCD) to effectively and uniformly load triamcinolone acetonide (TA). The TA-loaded HPCD DMN (TAMN) exhibits excellent mechanical performance that can easily pierce the thickened psoriasis lesions and deliver TA efficiently. Owing to the increased water solubility and bioavailability of TA after inclusion into HPCD, TAMN shows a superior in vitro inhibitory effect on immortalized human keratinocyte (HaCaT) cells. Importantly, the administration of TAMN twice a week effectively alleviates psoriatic signs and reduces the expression of Ki67, IL-23, and IL-17 in the ear lesions of imiquimod-induced psoriasis-like mice. This supramolecular DMN provides a promising strategy for the efficient treatment of psoriasis and other skin diseases, greatly broadens the applications of supramolecular materials in transdermal drug delivery, and widens the range of drugs in DMNs.

Asunto(s)