RESUMEN

Lattice materials are an emerging family of advanced engineering materials with unique advantages for lightweight applications. However, the mechanical behaviors of lattice materials at ultra-low relative densities are still not well understood, and this severely limits their lightweighting potential. Here, a high-precision micro-laser powder bed fusion technique is dveloped that enables the fabrication of metallic lattices with a relative density range much wider than existing studies. This technique allows to confirm that cubic lattices in compression undergo a yielding-to-buckling failure mode transition at low relative densities, and this transition fundamentally changes the usual strength ranking from plate > shell > truss at high relative densities to shell > plate > truss or shell > truss > plate at low relative densities. More importantly, it is shown that increasing bending energy ratio in the lattice through imperfections such as slightly-corrugated geometries can significantly enhance the stability and strength of lattice materials at ultra-low relative densities. This counterintuitive result suggests a new way for designing ultra-lightweight lattice materials at ultra-low relative densities.

RESUMEN

Inspired by material hybrid design, novel hybrid sandwich shells were developed by filling a corrugated cylindrical structure with aluminum foam to achieve higher energy absorption performance. The crushing behavior of the foam-filled corrugated sandwich cylindrical shells (FFCSCSs) was investigated using theoretical and numerical methods. Numerical results revealed a significant enhancement in the energy absorption of FFCSCSs under axial compression, showcasing a maximum specific energy absorption of 60 kJ/kg. The coupling strengthening effect is highly pronounced, with a maximum value of F¯c/F¯ reaching up to 40%. The mechanism underlying this phenomenon can be approached from two perspectives. Firstly, the intrusion of folds into the foam insertions allows for more effective foam compression, maximizing its energy absorption capacity. Secondly, foam causes the folds to bend upwards, intensifying the mutual compression between the folds. This coupling mechanism was further investigated with a focus on analyzing the influence of parameters such as the relative density of the foam, the wall thickness of the sandwich shell, and the material properties. Moreover, a theoretical model was developed to accurately predict the mean crushing force of the FFCSCSs. Based on this model, the influence of various variables on the crushing behavior of the structure was thoroughly investigated through parametric studies.

RESUMEN

Thermal processing is a useful method for improving the strengthening effects of fibers used to reinforce metal matrix composites (MMCs), but the corresponding models have not been constructed. In this work, a Ti matrix composite (TMC) reinforced by in situ TiB fibers was prepared, then thermal processing was applied to it at different levels of deformation to align the TiB fibers along the loading direction. Changes in the microstructure of the matrix, the orientation and the aspect ratio of the TiB fibers during this process were investigated. It was found that the aspect ratio of TiB fibers decreased sharply after a large amount of deformation. The strengthening effect of TiB fibers in the composite was simulated by strengthening models of the fibers, and the simulated results were verified by the results of tensile tests. The modeled results show that the strengthening factor (C0) of the in situ TiB fibers improved from 0.125 in the as-cast composite to 0.520, 0.688 and 0.858 by the processes with deformation ratios of 0.39, 0.26 and 0.14, respectively. The results of the tensile tests showed that the measured values of C0 gradually deviated from the modeled ones with an increase in the ratio of deformation applied during processing, and the deviation could be interpreted with the strengthening models.

RESUMEN

In the context of the new economic normal, environmental protection and economic growth have become the focus of academic attention. This paper explores the effect and impact mechanism of environmental regulations on the outward foreign direct investment (OFDI) of enterprises by using data from the China Industrial Enterprise Database and the Directory of Overseas Investment Enterprises (Institutions) for the years 2004 to 2010. The findings are summarised as follows. Firstly, environmental regulations have a significant positive effect on the OFDI of Chinese enterprises, and this result remains robust after considering the outcomes of robustness tests and endogeneity issues. Secondly, the promotion effect of environmental regulations on the OFDI of Chinese enterprises obviously differs across investment motivations and industry characteristics. Thirdly, productivity gains are important channels through which environmental regulations promote the OFDI of enterprises. These findings have great significance for the effective formulation of environmental regulatory policies and the stable development of the OFDI of Chinese enterprises.

Asunto(s)

RESUMEN

Graphene nanowall (GNW) films, a representation of three-dimensional (3D) carbon nanomaterial films, are emerging as promising candidates for applications in electric devices and composites, on account of their 3D structures and exceptional properties of graphene sheets. However, the frictional responses of GNW films, which exhibit significant influence on their performances, have seldom been reported. Herein, we reported a growth process of a GNW film by the chemical vapor deposition method and studied the frictional behavior of the GNW film for the first time. The results demonstrated the nonlinearity between the frictional force of the GNW film and normal load. Based on the structural evolution of the GNW film with normal load and frictional tests on precompressed GNW films, the influence of the strain property of the GNW film, namely, the strengthening effect, could be confirmed. The results of molecular dynamics simulations show that the bending force of GNWs in front of the tip plays a determinate role in the frictional force of the GNW film. Furthermore, the bending force is proportional to the bending contact area, which increases nonlinearly with the normal load due to the strengthening effect of the GNW film. The result suggests that the nonlinear increase of the bending contact area induced by the strengthening effect of the GNW film is the key factor that leads to its nonlinear frictional force. This study provides a novel insight into the frictional responses of GNW films, which would be beneficial for the design and application of electric devices and composites made of GNW and other 3D carbon nanomaterial films.

RESUMEN

In crystalline materials, grain boundary and anisotropy of crystal structure affect their mechanical properties. The effects of interfacial structure on the mechanical properties may be diverse when the multilayer film is loaded along different directions. In this work, we performed a series of molecular dynamics simulations of the tension of in-plane single and polycrystalline Cu/Pd multilayered films with cube-on-cube (COC) and twinned interfaces to explore the effects of the interfacial structure, loading direction and in-plane grain boundaries on their mechanical properties. The interfacial misfit dislocation lines become bent after relaxation, and the high temperature of 300 K was found as a necessary condition. When stretched along 〈110〉 direction, the strengthening effect of the COC interface is more noticeable; however, when stretched along 〈112〉 direction, the twin interface's strengthening effect is more visible, showing the anisotropic effect of interfacial structure on mechanical properties. However, in the in-plane honeycomb polycrystalline sample, the twin interface showed a pronounced strengthening effect, and no jogged dislocations were observed.

RESUMEN

An innovative superimposed electric field (SEF) was designed with the aim to achieve uniform removal of polycyclic aromatic hydrocarbons (PAHs) in soil. Also the influence of SEF on the bioremediation efficiency of PAHs was investigated in compared with the common electric field (CEF). Five experiments were conducted in this study, namely EK-CEF (applied CEF), EKB-CEF (CEF enhanced bioremediation), EK-SEF (applied SEF), EKB-SEF (SEF enhanced bioremediation), and Bio (bioremediation). The results indicated that electric field with periodically reversed polarity could effectively prevent the occurrence of large changes in soil pH, temperature, and electric current. The electric field intensity of SEF was concentrated in the range of 0.5-1.5 V/cm, and the difference between the maximum and minimum PAHs removal percentage in EK-SEF was just 5.4%, in comparison to 14.8% in EK-CEF. The bioremediation promoting effect did not show significant difference between SEF and CEF. Compared to Bio, the removal percentages of the 5-ring and 6-ring PAHs attributed to the degrading bacteria were much higher in EKB-SEF and EKB-CEF. Moreover, the microbial number increased with the distance away from electrodes, and the microbial community changed correspondingly. All these would be resulted in differences removal efficiencies among different PAHs components. Despite its intrinsic advantages, the influence of SEF on soil physicochemical and biological properties needs further study.

Asunto(s)

RESUMEN

The steel-wire-carbon-fiber-reinforced plate (SCFR plate) is a relatively new strengthening technology for concrete structures. In this paper, a series of lateral impact tests on SCFR plates and conventional carbon-fiber-reinforced plates (CFR plates) were first performed, followed by tensile tests of both the SCFR plates and the CFR plates. It is found that the SCFR plates can provide the same level of tensile strength as CFR plates, whilst having evident advantages in terms of better ductility and lateral resistance. It is also found that increasing the amount of the steel wire can improve the lateral resistance of the SCFR plate. In addition, the SCFR plate shows the advantage of a reduction in lateral damage, which is commonly experienced by CFR plates during transportation, construction, and maintenance. In the second stage of the research, flexural tests of both SCFR and CFR plate-strengthened reinforced concrete (RC) beams were performed. The failure modes and crack patterns of the RC beams were investigated. Results show that the SCFR plate-strengthened beam exhibits enhanced ductility compared to that strengthened by traditional CFR plates, thereby enhancing the flexural capacity of the RC beams. On the basis of the test results, a formula is designed to predict the flexural capacity of SCFR plates; good agreement is achieved.

RESUMEN

The process of nitrate dissimilation to ammonium (DNRA) is an important way for storing nitrogen in nature and DNRA is a key step in efficient recovery of nitrogen in wastewater. However, in view of the low conversion efficiency of DNRA, zero-valent iron (ZVI) was used to enhance the DNRA process of Desulfovibrio sp. CMX. ZVI can obviously promote the nitrate/nitrite reduction. The experiment indicated that 5 g/L 300 mesh ZVI could convert 5 mmol/L nitrate or nitrite to ammonium in 48 h or 36 h respectively, and the conversion ratio of NO2- to NH4+ could reach more than 90%. The ZVI provided a suitable growth environment for the Desulfovibrio sp. CMX through chemical reduction of nitrite, production of divalent iron (Fe2+), reduction of oxidation-reduction potential (ORP) and adjustment of pH, which strengthened the DNRA performance. This experiment is advantageous for increasing efficiency of DNRA and provides a new idea for efficient recovery of nitrogen resources.

Asunto(s)

RESUMEN

Shoulder fillets are widely used in the structural optimization design of metal dampers. However, the plastic deformation property of dampers affected by stress concentration, owing to different fillets, has not been explored in-depth. In this study, two typical metal damper materials with different plastic deformation, i.e., ordinary steel SS400 and low-yield-strength steel LYS160, were investigated. The strengthening effect of fillets under different loading is evaluated by comparing the mechanical properties of different fillet heights. Furthermore, the effect of the stress concentration caused by different fillet shapes, based on the failure mode of materials, is discussed. Subsequently, the fatigue degradation effect under the reciprocating shear loading is studied. Based on a series of studies on the deformation properties of fillets in different ductile materials, the basis for the structural optimization design under plastic deformation is provided.

RESUMEN

This paper addresses the effects of Ce-rich mischmetal on the microstructure evolution of a 5182 aluminum alloy during annealing and rolling processes. The Ce-rich mischmetal was added to an as-cast 5182 aluminum alloy in an induction furnace, and this was followed by homogenized annealing at 450 °C for 24 h and a rolling operation. The microstructure evolution and mechanical properties' analysis of the 5182 Al alloy were characterized. The results show that the Ce-rich mischmetal could modify the microstructure, refine the α-Al grains, break the network distribution of Mg2Si phases, and prevent Cr and Si atoms from diffusing into the Al6(Mn, Fe) phase in the as-cast 5182 Al alloys. Ce-rich mischmetal elements were also found to refine the Al6(Mn, Fe) phase after cold rolling. Then, the refined Al6(Mn, Fe) particles inhibited the growth of recrystallization grains to refine them from 10.01 to 7.18 µm after cold rolling. Consequently, the tensile strength of the cold-rolled 5182 Al alloy increased from 414.65 to 454.34 MPa through cell-size strengthening, dislocation density strengthening, and particle strengthening. The tensile strength of the recrystallization annealed 5182 Al alloy was increased from 322.16 to 342.73 MPa through grain refinement strengthening, and this alloy was more stable after the recrystallization annealing temperature.

RESUMEN

The subcritical liquid hot water (SLHW) pretreatment could be strengthened by its byproduct-organic acids, such as acetic acid (AA), lactic acid (LA) and formic acid (FA). The effects of these three acids on the pretreatment were investigated by the yield of fermentable sugars. The results showed that the addition of acids could effectively catalyze the hydrolysis of hemicellulose to C5 sugars and contribute to the subsequent enzymatic hydrolysis of cellulose. It was found that all three organic acids promote xylose production, and the copresence of AA + LA could limit the content of the fermentation inhibitor. The optimum proportion of three organic acids were 0.33 wt%AA + 0.45 wt%LA + 0.20 wt%FA, and the yield of C5 sugars after pretreatment and C6 sugar after enzymatic hydrolysis were 89.06% and 78.56%, respectively. The kinetic studies proved that byproduct-organic acids could promote xylose production and inhibit its further degradation and explained that xylose would accumulate at lower temperatures.

Asunto(s)

RESUMEN

The shear behaviors of reinforced concrete (RC) beams externally strengthened with engineered cementitious composite (ECC) layers were studied and the strengthening effect was evaluated based on a truss and arch model. The beams were designed without web reinforcement in the middle part and ECC was sprayed onto both sides of the beams to the designed thicknesses, which were 20 mm and 40 mm. A series of four-point bending experiments were conducted and analyzed. The development of the shear strain in each side of the beams was recorded by strain rosettes formed with three fiber Bragg grating (FBG) sensors. The thickness of ECC layers, reinforcement ratios, and shear span-to-depth ratios were considered and analyzed. This is an effective way to shear strengthen RC beams with ECC layers. The ultimate load of the strengthened specimen can be improved by 89% over the control specimen. Strengthening an RC beam into an under-reinforced beam should be avoided. The FBG sensors are suitable to measure and monitor the development of shear strain in the side of the strengthened specimen. Based on the truss and arch model, an evaluation of the shear strengthening effect was established and the results agree well with the experimental results.

RESUMEN

Most fatigue theories neglect the loads below fatigue limit in damage accumulation, which leads to inconsistency between the predicted and the actual fatigue lives. In this study, a novel damage model is proposed to take into account the loads below fatigue limit from two aspects: the strengthening effect and the cumulative damage. The strengthening effect is introduced by an exponential function and the cumulative damage is calculated by fuzzy method with membership functions (MFs). The proposed model is verified against the experimental data under variable amplitude loading conditions. It is found the modified model with Cauchy MF significantly reduces the relative error of predicted life from 35.18% (linear model) and 16.09% (original Chaboche model) to 8.38% (proposed model). As a case study, the proposed damage model is implemented to evaluate the service life of a compressor blade under variable amplitude loading spectrum containing small loads below the fatigue limit.

RESUMEN

Nowadays refractory high-entropy alloys (RHEAs) are regarded as great candidates for the replacement of superalloys at high temperature. To design a RHEA, one must understand the pros and cons of every refractory element. However, the elemental effect on mechanical properties remains unclear. In this study, the subtraction method was applied on equiatomic HfMoNbTaTiZr alloys to discover the role of each element, and, thus, HfMoNbTaTiZr, HfNbTaTiZr, HfMoTaTiZr, HfMoNbTiZr, HfMoNbTaZr, and HfMoNbTaTi were fabricated and analyzed. The microstructure and mechanical properties of each alloy at the as-cast state were examined. The solid solution phase formation rule and the solution strengthening effect are also discussed. Finally, the mechanism of how Mo, Nb, Ta, Ti, and Zr affect the HfMoNbTaTiZr alloys was established after comparing the properties of these alloys.

RESUMEN

The liquid hot water (LHW) pretreatments would be accelerated by the organic acids produced from the process. In the study, the organic acids included not only acetic acid but also lactic acid during LHW hydrolysis of reeds, at 180-220°C and for 15-135min. The lactic acid was presumably produced from xylose degradation in the pretreatment process. The different organic acids, such as acetic acid, lactic acid and acetic-lactic acids, were used to strengthen the LHW pretreatments for increasing xylose production. Moreover, the work presented kinetic models of xylose and hemicellulose at different conditions, considering the generation of lactic acid. The experimental and kinetic results both indicated that acetic-lactic acids had synergistic catalytic effect on the reaction, which could not only inhibit the degradation of xylose, but also promote the hydrolysis of hemicellulose. Besides, the highest concentration of xylose of 7.323g/L was obtained at 200°C, for 45min and with 1wt% acetic-lactic acids.

Asunto(s)

RESUMEN

Lightweighting in the transportation industry is today recognized as one of the most important strategies to improve fuel efficiency and reduce anthropogenic climate-changing, environment-damaging, and human death-causing emissions. However, the structural applications of lightweight alloys are often limited by some inherent deficiencies such as low stiffness, high wear rate and inferior strength. These properties could be effectively enhanced by the addition of stronger and stiffer reinforcements, especially nano-sized particles, into metal matrix to form composites. In most cases three common strengthening mechanisms (load-bearing effect, mismatch of coefficients of thermal expansion, and Orowan strengthening) have been considered to predict the yield strength of metal matrix nanocomposites (MMNCs). This study was aimed at developing a unified model by taking into account the matrix grain size and porosity (which is unavoidable in the materials processing such as casting and powder metallurgy) in the prediction of the yield strength of MMNCs. The Zener pinning effect of grain boundaries by the nano-sized particles has also been integrated. The model was validated using the experimental data of magnesium- and titanium-based nanocomposites containing different types of nano-sized particles (namely, Al2O3, Y2O3, and carbon nanotubes). The predicted results were observed to be in good agreement with the experimental data reported in the literature.

RESUMEN

Prednisolone-induced zebrafish osteoporosis model was used to explore the bone-strengthening effect of Jie-Gu-Tang (JGT). Zebrafish larvae of 5 days post fertilization (d.p.f.) were co-exposed with 25 μmol·L-1 pred-nisolone and a series of JGT solutions with a range of concentrations (0.025, 0.25, 2.5, 25 and 100 mg crude herb per liter). The 25 μmol·L-1 prednisolone was selected as the model group. Etidronate disodium (15 and 30 mg·mL-1) with 25 μmol·L-1 prednisolone was used as the positive group. And 0.5% DMSO was used as the vehicle control group. All groups were incubated in 24-well plates (28.5℃) until 10 d.p.f. Zebrafish skeleton at 10 d.p.f. was anes-thetized and fixed for staining with alizarin red. Quantitative analysis of the stained area was performed by microscop-ic inspection and digital imaging methods to reflect the amount of zebrafish head skeleton mineralization. The results showed that prednisolone group at 25 μmol·L-1 concentration can obviously decrease the staining area and the stain-ing optical density values when compared with the vehicle control group (0.5% DMSO). Compared with the model group, both etidronate disodium (15 and 30 mg·mL-1) and JGT (2.5, 25 and 100 mg crude herb per liter) can in-crease the mineralized matrix and integrated optical density (IOD) of zebrafish head skeleton significantly with dose-effect relationship. It was concluded that zebrafish osteoporosis model was successfully used in the evaluation on bone loss prevention and bone formation promotion of JGT, which provided basis for the reliability and reasonability of zebrafish model.