RESUMEN
Triacylglycerols (TAGs), a major lipid class in foods and the human body, consist of three fatty acids esterified to a glycerol backbone. They can occur in various isomeric forms, including sn-positional, cis/trans configurational, acyl chain length, double bond positional, and mixed type isomers. Separating isomeric mixtures is of great interest as different isomers can have distinct influence on mechanisms, such as digestibility, oxidative stability, or lipid metabolism. However, TAG isomer separation remains challenging with established analytical methodologies such as liquid-chromatography coupled to mass spectrometry (LC-MS). In this study, we developed a method with cyclic ion mobility mass spectrometry (cIMS-MS) for the separation and identification of all types of TAG isomers. First, the influence of different adducts (Li+, NH4+, Na+, and K+) on the separation was studied. Overall, it was concluded that the sodium adduct is the best choice to efficiently separate all types of TAG isomers. In addition, trends were found in the influence of specific structural features on the drift time order. An order of relative influence (from high to low) was established; (1) degree of unsaturation of the fatty acid(s) on an exterior position (if the total degree of unsaturation(s) is equal in both TAGs), (2) acyl chain length on the exterior positions, (3) cis/trans configuration, and (4) double bond (DB)-position. Finally, various cIMS-MS strategies were developed for the separation of mixtures containing four, five, and six isomers. To conclude, the developed methods can be used for separation of complex mixtures of TAG isomers and have great potential to be expanded to isomers of similar types of lipids such as di- and monoacylglycerols. This study also shows the potential of cIMS-MS to be used for the application on real TAG samples.
RESUMEN
Organic photovoltaics (OPVs) have great potential to drive low-power consumption electronic devices under indoor light due to their highly tunable optoelectronic properties. Thick devices (>300 nm photo-active junctions) are desirable to maximize photocurrent and to manufacture large-scale modules via solution-processing. However, thick devices usually suffer from severe charge recombination, deteriorating device performances. Herein, the study demonstrates excellent thickness tolerance of all-polymer-based PVs for efficient and stable indoor applications. Under indoor light, device performance is less dependent on photoactive layer thickness, exhibiting the best maximum power output in thick devices (34.7 µW cm-2 in 320-475 nm devices). Thick devices also exhibit much better photostability compared with thin devices. Such high thickness tolerance of all-polymer-based PV devices under indoor operation is attributed to strongly suppressed space-charge effects, leading to reduced bimolecular recombination losses in thick devices. The unbalanced charge carrier mobilities are identified as the main cause for significant space-charge effects, which is confirmed by drift-diffusion simulations. This work suggests that all-polymer-based PVs, even with unbalanced mobilities, are highly desirable for thick, efficient, and stable devices for indoor applications.
RESUMEN
The space charge layer (SCL) dilemma, caused by mobile anion concentration gradient and the rapid consumption of cations, is the fundamental reason for the generation of zinc dendrites, especially under high-rate discharge conditions. To address the issue, a physical (PbTiO3)/chemical (AMPS-Zn) barrier is designed to construct stable zinc ion flow and disrupt the gradient of anion concentration by coupling the ferroelectric effect with tethered anion electrolyte. The ferroelectric materials PbTiO3 with extreme-high piezoelectric constant can spontaneously generate an internal electric field to accelerate the movement of zinc ions, and the polyanionic polymer AMPS-Zn can repel mobile anions and disrupt the anions concentration gradient by tethering anions. Through numerical simulations and analyses, it is discovered that a high Zn2+ transference number can effectively weaken the SCL, thus suppressing the occurrence of zinc dendrites and parasitic side reactions. Consequently, an asymmetric cell using the PbTiO3@Zn demonstrates a reversible plating/stripping performance for 2900 h, and an asymmetric cell reaches a state-of-the-art runtime of 3450 h with a high average Coulombic efficiency of 99.98%. Furthermore, the PbTiO3@Zn/I2 battery demonstrated an impressive capacity retention rate of 84.0% over 65000 cycles by employing a slender Zn anode.
RESUMEN
Alkali metal anodes paired with solid ion conductors offer promising avenues for enhancing battery energy density and safety. To facilitate rapid ion transport crucial for fast charging and discharging of batteries, it is essential to understand the behavior of point defects in these conductors. In this study, we investigate the heterogeneity of defect distribution in two prototypical solid ion conductors, Li3OCl and Li2PO2N (LiPON), by quantifying the defect formation energy (DFE) as a function of distance from the surface and interface through first-principles simulations. To simulate defects at the electrode-electrolyte interface, we perform calculations of Li+ vacancy in Li3OCl near its interface with lithium metal. Our results reveal a significant difference between the bulk and surface/interface DFE which could lead to defect aggregation/depletion near the surface/interface. Interestingly, while Li3OCl has a lower surface DFE than the bulk in most cases, LiPON follows the opposite trend with a higher surface DFE compared to the bulk. Due to this difference between bulk and surface DFE, the defect density can be up to 14 orders of magnitude higher at surfaces compared to the bulk. Further, we reveal that the DFE transition from surface/interface to bulk is precisely characterized by an exponentially decaying function. By incorporating this exponential trend, we develop a revised model for the average behavior of defects in solid ion conductors that offers a more accurate description of the influence of grain sizes. Surface effects dominate for grain sizes â²1 µm, highlighting the importance of surface defect engineering and the DFE function for accurately capturing ion transport in devices. We further explore the kinetics of defect redistribution by calculating the migration barriers for defect movement between bulk and surfaces. We find a highly asymmetric energy landscape for the lithium vacancies, exhibiting lower migration barriers for movement toward the surface compared to the bulk, while interstitial defects exhibit comparable kinetics between surface and bulk regions. These insights highlight the importance of considering both thermodynamic and kinetic factors in designing solid ion conductors for improved ion transport at surfaces and interfaces.
RESUMEN
The insulation of high-voltage direct-current (HVDC) cables experiences a short period of voltage polarity reversal when the power flow is adjusted, leading to sever field distortion in this situation. Consequently, improving the insulation performance of the composite insulation structure in these cables has become an urgent challenge. In this paper, SiC-SR (silicone rubber) and TiO2-SR nanocomposites were chosen for fabricating HVDC cable accessories. These nanocomposites were prepared using the solution blending method, and an electro-acoustic pulse (PEA) space charge test platform was established to explore the electron transfer mechanism. The space charge characteristics and field strength distribution of a double-layer dielectric composed of cross-linked polyethylene (XLPE) and nano-composite SR at different concentrations were studied during voltage polarity reversal. Additionally, a self-built breakdown platform for flake samples was established to explore the effect of the nanoparticle doping concentration on the breakdown field strength of double-layer composite media under polarity reversal. Therefore, a correlation was established between the micro electron transfer process and the macro electrical properties of polymers (XLPE/SR). The results show that optimal concentrations of nano-SiC and TiO2 particles introduce deep traps in the SR matrix, significantly inhibiting charge accumulation and electric field distortion at the interface, thereby effectively improving the dielectric strength of the double-layer polymers (XLPE/SR).
RESUMEN
Noncovalent spatial interaction has become an intriguing and important tool for constructing optoelectronic molecules. In this study, we linearly attached three conjugated units in a multi π-stacked manner by using just one trident bridge based on indeno[2,1-b]fluorene. To achieve this structure, we improved the synthetic approach through double C-H activation, significantly simplifying the preparation process. Due to the proximity of the C10, C11, and C12 sites in indeno[2,1-b]fluorene, we derived two novel donor|acceptor|donor (D|A|D) type molecules, 2DMB and 2DMFB, which exhibited closely packed intramolecular stacking, enabling efficient through-space charge transfer. This molecular construction is particularly suitable for developing high-performance thermally activated delayed fluorescence materials. With donor(s) and acceptor(s) constrained and separated within this spatially rigid structure, elevated radiative transition rates, and high photoluminescence quantum yields were achieved. Organic light-emitting diodes incorporating 2DMB and 2DMFB demonstrated superior efficiency, achieving maximum external quantum efficiencies of 28.6 % and 16.2 %, respectively.
RESUMEN
Heterogeneous electrode materials possess abundant heterointerfaces with a localized "space charge effect", which enhances capacity output and accelerates mass/charge transfer dynamics in energy storage devices (ESDs). These promising features open new possibilities for demanding applications such as electric vehicles, grid energy storage, and portable electronics. However, the fundamental principles and working mechanisms that govern heterointerfaces are not yet fully understood, impeding the rational design of electrode materials. In this study, the heterointerface evolution during charging and discharging process as well as the intricate interaction between heterointerfaces and charge/mass transport phenomena, is systematically discussed. Guidelines along with feasible strategies for engineering structural heterointerfaces to address specific challenges encountered in various application scenarios, are also provided. This review offers innovative solutions for the development of heterogeneous electrode materials, enabling more efficient energy storage beyond conventional electrochemistry. Furthermore, it provides fresh insights into the advancement of clean energy conversion and storage technologies. This review contributes to the knowledge and understanding of heterointerfaces, paving the way for the design and optimization of next-generation energy storage materials for a sustainable future.
RESUMEN
Doped metal oxide nanocrystals exhibit a localized surface plasmon resonance that is widely tunable across the mid- to near-infrared region, making them useful for applications in optoelectronics, sensing, and photocatalysis. Surface states pin the Fermi level and induce a surface depletion layer that hinders conductivity and refractive index sensing but can be advantageous for optical modulation. Several strategies have been developed to both synthetically and postsynthetically tailor the depletion layer toward particular applications; however, this understanding has primarily been advanced in Sn-doped In2O3 (ITO) nanocrystals, leaving open questions about generalizing to other doped metal oxides. Here, we quantitatively analyze the depletion layer in In-doped CdO (ICO) nanocrystals, which is shown to have an intrinsically wide depletion layer that leads to broad plasmonic modulation via postsynthetic chemical reduction and ligand exchange. Leveraging these insights, we applied depletion layer tuning to enhance the inherently weak plasmonic coupling in ICO nanocrystal superlattices. Our results demonstrate how an electronic band structure dictates the radial distribution of electrons and governs the response to postsynthetic modulation, enabling the design of tunable and responsive plasmonic materials.
RESUMEN
As promising prospects for renewable power harvesting, two-dimensional (2D) nanochannels for osmotic energy capture in a reverse electrodialysis arrangement have garnered significant attention. However, existing 2D nanochannel membranes have shown limited power generation capabilities due to challenges in balancing ion flux and selectivity. Here, we construct montmorillonite (MMT)/TEMPO-mediated oxidation cellulose nanofibers (TOCNFs) nanocomposite membranes for enhanced ion transmembrane transport. The intercalation of TOCNFs not only enlarges the interlayer distance, but also provides abundant space charge inside the nanochannels. Benefiting from the strong ion selectivity and high ion flux, the composite membrane achieves a remarkable power output of â¼16.57 W/m2 in the gradient of artificial seawater and river water, exceeding that of the state-of-the-art heterogeneous membrane-based osmotic energy conversion systems. Both experimental and theoretical findings confirm that the synergism of space and surface charge plays a crucial role in promoting osmotic energy conversion. This research contributes valuable insights into the optimization of 2D membranes for efficient clean energy harvesting purposes.
RESUMEN
It is unclear, which role space charge layers (SCLs) play within an all-solid-state battery during operation with high current densities, and to which extent they form. Herein, we use a solid electrolyte with a known SCL formation and investigate it in a symmetric cell under non-blocking conditions with Li metal electrodes. Since the used LICGC™ electrolyte is known for its instability against lithium, it is protected from rapid degradation by nanometer-thin layers of TiOx deployed by atomic layer deposition. Close attention is given to the interfacial properties, as now additional Li+ can traverse through the interface depending on the applied bias potential. The interlayer's impedance response shows efficient lithium-ion conduction for low bias potentials and a diffusion-limiting effect towards high positive and negative potentials. SCLs grow up to a thickness of 5.1 µm. Additionally, estimating the apparent rate constant of the charge transfer across the interface indicates that the potentials where kinetics are hindered coincide with the widest SCLs. In conclusion, the investigation under higher steady-state currents was only possible because of the improved stability due to the interlayer. No chemo-physical failure could be observed after 800+ hours of cycling. However, SEM study shows a new phase at the interface.
RESUMEN
The aging of cable insulation presents a significant threat to the safe operation of cables, with space charge serving as a crucial factor influencing cable insulation degradation. However, the characteristics related to space charge and conduction current behavior during thermal aging remain unclear. This study focused on the thermal aging of cross-linked polyethylene (XLPE) material and utilizes a combined pulse electro-acoustic (PEA) and conduction current testing system to analyze the space charge and conduction current characteristics in the sample under varying electric fields and temperatures. The average charge density, short-circuit residual electric field, electric field distortion rate, and conduction current were studied. The findings indicate that the space charge in the samples following thermal aging is predominantly governed by the injected charge. The amorphous region of XLPE decreases, while the cross-linking degree increases after aging, thereby facilitating charge carrier migration within the sample and reducing the generation of charge carriers through thermal pyrolysis. The minimum temperature required for charge injection is reduced by thermal aging. Furthermore, modifications in conduction current, residual electric field, and average charge density indicate that thermal aging has the potential to alter the microstructure and trap characteristics of XLPE. This study provides empirical evidence to elucidate the underlying mechanism of cable insulation aging.
RESUMEN
Crosslinked polyethylene (XLPE) is an important polyethylene modification material which is widely used in high-voltage direct current (HVDC) transmission systems. Low-density polyethylene (LDPE) was used as a matrix to improve the thermal and electrical properties of XLPE composites through the synergistic effect of a crosslinking agent and nanopore structure molecular sieve, TS-1. It was found that the electrical and thermal properties of the matrices were different due to the crosslinking degree and crosslinking efficiency, and the introduction of TS-1 enhanced the dielectric constants of the two matrices to 2.53 and 2.54, and the direct current (DC) resistivities were increased to 3 × 1012 and 4 × 1012 Ω·m, with the enhancement of the thermal conductivity at different temperatures. As the applied voltage increases, the DC breakdown field strength is enhanced from 318 to 363 kV/mm and 330 to 356 kV/mm. The unique nanopore structure of TS-1 itself can inhibit the injection and accumulation in the internal space of crosslinked polyethylene composites, and the pore size effect of the filler can limit the development of electron impact ionization, inhibit the electron avalanche breakdown, and improve the strength of the external applied electric field (breakdown field) that TS-1/XLPE nanocomposites can withstand. This provides a new method for the preparation of nanocomposite insulating dielectric materials for HVDC transmission systems with better performance.
RESUMEN
Rapid construction of new fluorescence emitters is essential in advancing synthetic luminescent materials. This study illustrated a piperidine-promoted reaction of chiral dialdehyde with benzoylacetonitrile and malonitrile, leading to the formation of the 6/6/7 fused cyclic product in good yield. The proposed reaction mechanism involves a dual condensation/cyclization process, achieving the formation of up to six bonds for fused polycycles. The single crystal structure analysis revealed that the fused cyclic skeleton contains face-to-face naphthyl and cyanoalkenyl motifs, which act as the electronic donor and acceptor, respectively, potentially resulting in through-space charge transfer (TSCT) emission. While the TSCT emissions were weak in solution, a notable increase in luminescence intensity was observed upon aggregation, indicating bright fluorescent light. A series of theoretical analyses further supported the possibility of spatial electronic communication based on frontier molecular orbitals, the distance of charge transfer, and reduced density gradient analysis. This work not only provides guidance for the one-step synthesis of complex polycycles, but also offers valuable insights into the design of aggregation-enhanced TSCT emission materials.
RESUMEN
The great potential of K1/2Bi1/2TiO3 (KBT) for dielectric energy storage ceramics is impeded by its low dielectric breakdown strength, thereby limiting its utilization of high polarization. This study develops a novel composition, 0.83KBT-0.095Na1/2Bi1/2ZrO3-0.075 Bi0.85Nd0.15FeO3 (KNBNTF) ceramics, demonstrating outstanding energy storage performance under high electric fields up to 425 kV cm-1: a remarkable recoverable energy density of 7.03 J cm-3, and a high efficiency of 86.0%. The analysis reveals that the superior dielectric breakdown resistance arises from effective mitigation of space charge accumulation at the interface, influenced by differential dielectric and conductance behaviors between grains and grain boundaries. Electric impedance spectra confirm the significant suppression of space charge accumulation in KNBNTF, attributable to the co-introduction of Na1/2Bi1/2ZrO3 and Bi0.85Nd0.15FeO3. Phase-field simulations reveal the emergence of a trans-granular breakdown mode in KNBNTF resulting from the mitigated interfacial polarization, impeding breakdown propagation and increasing dielectric breakdown resistance. Furthermore, KNBNTF exhibits a complex local polarization and enhances the relaxor features, facilitating high field-induced polarization and establishing favorable conditions for exceptional energy storage performance. Therefore, the proposed strategy is a promising design pathway for tailoring dielectric ceramics in energy storage applications.
RESUMEN
Osmotic energy harvesting was a promising way to alleviate energy crisis with reverse electrodialysis (RED) membrane-based technology. Charged hydrogel combined with other materials was an effective strategy to overcome problems, including restricted functional groups and complicated fabrication, but the effect of the respective charges of the two materials combined on the membrane properties has rarely been studied in depth. Herein, a new method was proposed that charged hydrogel was equipped with charged filter paper to form dual network fiber-hydrogel membrane for osmotic energy harvesting, which had excellent ion selectivity (beyond 0.9 under high concentration gradient), high ion transference number and energy conversion efficiency (beyond 32.5% under wide range concentration gradient), good property of osmotic energy conversion (â¼4.84 W/m2 under 50-fold KCl and â¼6.75 W/m2 under simulated sea water and river water). Moreover, the power density was attributed to the surface-space charge synergistic effect from large amounts overlapping of electric double layer (EDL), so that the transmembrane ion transport was enhanced. It might be a valid mode to extensively develop the osmotic energy harvesting.
RESUMEN
For all types of photosensors, efficient absorption of photons of particular interest is very essential. We report the effect of thickness of the ZnO layer in ZnO film-based X-ray sensors. A set of five samples Z1, Z2, Z3, Z4, and Z5 is developed by varying the thickness of the ZnO layer between 10 and 73 µm. The dark I-V characteristics of the sensors show a "pseudorectifying" type nature. A quantitative analysis of the dark currents reveals that the dark I-V characteristics are affected by space charge limited current (SCLC) due to intrinsic defects present in the ZnO films. The effect of the SCLC is prominent in the thicker films in comparison to the thinner ones. The sensors show high signal-to-noise (S/N) ratio below 5.0 V bias voltage. The S/N ratio is found to increase with the thickness of the ZnO layer due to efficient absorption of X-ray photons. The photoresponse characteristics of the sensors against dose rate are sublinear between 0.015 and 0.234 Gy/s. The photoresponse time of the sensors are found to be nearly 1 s. The sensitivities of Z1, Z2, Z3, Z4, and Z5 sensors at 4.5 V bias voltage for 0.234 Gy/s dose rate are estimated to be 55.51, 337.08, 312.01, 152.81, and 103.52 µC/Gy cm3, respectively. The sensitivity of the device is found to increase with increase in thickness of the ZnO layer and reaches an optimum level for the thickness of about 19-26 µm. Beyond this range, the sensitivity is found to decrease due to the Schubweg effect.
RESUMEN
Currently, most photoredox catalysis polymerization systems are limited by high excitation power, long polymerization time, or the requirement of electron donors due to the precise design of efficient photocatalysts still poses a great challenge. Herein, we propose a new approach: the creation of efficient photocatalysts having low ground state oxidation potentials and high excited state energy levels, along with through-space charge transfer (TSCT) induced intersystem crossing (ISC) properties. A cabazole-naphthalimide (NI) dyad (NI-1) characterized by long triplet excited state lifetime (τT=62â µs), satisfactory ISC efficiency (ΦΔ=54.3 %) and powerful reduction capacity [Singlet: E1/2 (PC+1/*PC)=-1.93â eV, Triplet: E1/2 (PC+1/*PC)=-0.84â eV] was obtained. An efficient and rapid polymerization (83 % conversion of 1â mM monomer in 30â s) was observed under the conditions of without electron donor, low excitation power (10â mW cm-2) and low catalyst (NI-1) loading (<50â µM). In contrast, the conversion rate was lower at 29 % when the reference catalyst (NI-4) was used for photopolymerization under the same conditions, demonstrating the advantage of the TSCT photocatalyst. Finally, the TSCT material was used as a photocatalyst in practical lithography for the first time, achieving pattern resolutions of up to 10â µm.
RESUMEN
Closely aligned configuration of the donor (D) and acceptor (A) is crucial for the light-emitting efficiency of thermally activated delayed fluorescence (TADF) materials with through-space charge transfer (TSCT) characteristics. However, precisely controlling the D-A distance of blue TSCT-TADF emitters is still challenging. Herein, an extra donor (D*) located on the side of the primary donor (D) is introduced to construct the hydrogen bonding with A and thus modulate the distance of D and A units to prepare high-efficiency blue TSCT emitters. The obtained "V"-shaped TSCT emitter presents a minimal D-A distance of 2.890 Å with a highly parallel D-A configuration. As a result, a high rate of radiative decay (>107 s-1) and photoluminescence quantum yield (nearly 90%) are achieved. The corresponding blue organic light-emitting diodes show maximum external quantum efficiencies (EQEmax) of 27.9% with a Commission Internationale de L'Eclairage (CIE) coordinate of (0.16, 0.21), which is the highest device efficiency of fluorene-based blue TSCT-TADF emitters. In addition, the TSCT-TADF emitter-sensitized OLEDs also achieve a high EQEmax of 29.3% with a CIE coordinate of (0.12, 0.16) and a narrow emission.
RESUMEN
Mechanical energy harvesting performances of poly(vinylidene fluoride) (PVDF) based composites are most often correlated with their polar phase and the individual piezoelectricity of the used filler materials. Here we show that the significant enhancement of space charge polarization of the said composites can play the key dominant role in determining their mechanical energy harvesting performance regardless of their polar phase and individual piezoelectricity of the used fillers. For this purpose, ionic liquid has been incorporated into PVDF/0.5(Ba0.7Ca0.3)TiO3-0.5Ba(Ti0.8Zr0.2)O3(BCZT) composites which led to a huge enhancement in space charge polarization. The gradual addition of ionic liquid into 10 wt% BCZT loaded PVDF (PBCZT) has helped in extraordinarily enhancing the conductivity gradually which has confirmed the huge enhancement of space charge polarization. However, after a certain limit of ionic liquid addition, the polar phase of the composite films is decreased. Despite this, the output voltages from the piezoelectric and piezo-tribo hybrid nanogenerators (PENGs and HNGs, respectively) fabricated by using the developed films have been found to be increased gradually with the increase in the ionic liquid amount in PBCZT composite. As the amount of BCZT filler was kept fixed for all the films, this result has confirmed the key role of space charge polarization of PVDF-based composites in determining their mechanical energy harvesting performances compared to the effect of polar phase and individual piezoelectricity of filler. The optimized PENG and HNG devices have shown the output voltage as high as 52 and 167 V, respectively, with power densities â¼85 and 152µW cm-2which predicted their excellent usability in real life energy conversion devices. This work also shows that the effect of extraordinarily enhanced space charge polarization is effective in improving the performance of all types of mechanical energy harvesting devices regardless of their mechanisms (piezoelectric or hybrid).
RESUMEN
Space charge effects are the Achilles' heel of all high-resolution ion optical devices. In time-of-flight mass analyzers, these may manifest as reduction of resolving power, mass measurement shift, peak coalescence, and/or transmission losses, while highly sensitive modern ion sources and injection devices ensure that such limits are easily exceeded. Space charge effects have been investigated, by experiment and simulation study, for the astral multi-reflection analyzer, incorporating ion focusing via a pair of converging ion mirrors, and fed by a pulsed extraction ion trap. Major factors were identified as the resonant effect between ~103 ions of similar m/z in-flight and the expansion of trapped packets of ~104-5 ions prior to extraction. Optimum operation and compensated ion mirror calibration strategies were then generated and described based on these findings.