RESUMEN

Exploring new methodologies for simple and on-demand methods of manipulating the emission and sensing ability of fluorescence sensor devices with solid-state emission molecular systems is important for realizing on-site sensing platforms. In this regard, although conjugated polymers (CPs) are some of the best candidates for preparing molecular sensor devices owing to their luminescent and molecular recognition properties, the development of CP-based sensor devices is still in its early stages. In this study, we herein propose a novel strategy for preparing a chemical stimuli-responsive solid-state emission system based on supramacromolecular assembly-induced emission enhancement (SmAIEE). The system was spontaneously developed by mixing only the component polymers (i.e., polythiophene and a transient cross-linking polymer). The proposed strategy can be applied to the facile preparation of molecular sensor devices. The analyte-induced fluorescent response of polythiophene originated from the dynamic displacement of the transient cross-linker in the polythiophene ensemble and the generation of the polythiophene-analyte complex. Our successful demonstration of the spontaneous preparation of the fluorescence sensor system by mixing two component polymers could lead to the development of on-site molecular analyzers including the determination of multiple analytes.

RESUMEN

Upon introducing bulky aromatic groups into benzodifuranone derivatives, crystals with unprecedented solid-state emission were obtained. A crystallographic analysis revealed that the emissive properties should most likely be attributed to the absence of stacking between the dye scaffolds. In addition to the solid-state emission, the compound showed responsivity to external stimuli, i.e., luminescent mechanochromism and thermosalient effect.

RESUMEN

Colloidal carbon dots (CDs) have garnered much attention as metal-free photoluminescent nanomaterials, yet creation of solid-state fluorescent (SSF) materials emitting in the deep red (DR) to near-infrared (NIR) range poses a significant challenge with practical implications. To address this challenge and to engineer photonic functionalities, a micro-resonator architecture is developed using carbonized polymer microspheres (CPMs), evolved from conventional colloidal nanodots. Gram-scale production of CPMs utilizes controlled microscopic phase separation facilitated by natural peptide cross-linking during hydrothermal processing. The resulting microstructure effectively suppresses aggregation-induced quenching (AIQ), enabling strong solid-state light emission. Both experimental and theoretical analysis support a role for extended π-conjugated polycyclic aromatic hydrocarbons (PAHs) trapped within these microstructures, which exhibit a progressive red shift in light absorption/emission toward the NIR range. Moreover, the highly spherical shape of CPMs endows them with innate photonic functionalities in combination with their intrinsic CD-based attributes. Harnessing their excitation wavelength-dependent photoluminescent (PL) property, a single CPM exhibits whispering-gallery modes (WGMs) that are emission-tunable from the DR to the NIR. This type of newly developed microresonator can serve as, for example, unclonable anti-counterfeiting labels. This innovative cross-cutting approach, combining photonics and chemistry, offers robust, bottom-up, built-in photonic functionality with diverse NIR applications.

RESUMEN

Determining thermal history is crucial in many industrial processes, but reliable and sensitive organic thermal history indicators are currently absent. Herein, we report on the development of a squaraine-based fluorescent molecule, DPEA-SQ, for the detection of thermal exposure histories up to 436 K. DPEA-SQ forms multiple single crystals (DPEA-SQ-I, DPEA-SQ-II, and DPEA-SQ-III) with different conformations and aggregate-state packing modes, contributing to their different fluorescence wavelengths, lifetimes, and efficiencies. Interestingly, DPEA-SQ-I and DPEA-SQ-III undergo aggregate-state structural transitions to form the thermodynamically more stable DPEA-SQ-II, which are accompanied by changes in their fluorescence. By taking advantage of similar aggregate-state structural transformations during heating, a high-temperature thermal exposure history of up to 436 K is recorded and reflected by their fluorescence. To demonstrate the potential practical applications of DPEA-SQ, a DPEA-SQ-Powder/PDMS film is prepared and coated on an electric circuit board, which enables real-time monitoring of localized overheating by the naked eye. Additionally, the fluorescence peaks of DPEA-SQ-Powder and DPEA-SQ-Powder/PDMS films remain unchanged after storage at 373 K for 52 days, demonstrating high aggregate-state stability. The fast and reliable responses of this system make it an excellent candidate for the detection of overtemperature traces in electronic components and circuit diagnosis.

RESUMEN

A 4-amino-1,8-naphthalimide containing tetramethylpiperidine in N-position was synthesized. The prepared 1,8-naphthalimide was found to possess bright yellow-green fluorescence in a solid state, which could be switched-off in the presence of acid vapors and then switched-on after exposure on base vapors. The observed fluorescence quenching or enhancement, respectively, was more than 10-fold. This behavior was quite opposite to that of the similar 4-oxy-1,8-naphthalimide, in which a well-pronounced PET process operates. In addition, the observed fluorescence quenching was accompanied with color change from yellow to red. Based on these results, the reported 4-amino-1,8-naphthalimide was successfully applied as a reversible solid-state emissive chemosensing material for rapid detection of acid-base vapors for multiple usage.

RESUMEN

A series of 3-aroylbenzocoumarin-based luminogens have been synthesized for investigating their aggregation-induced emission (AIE) and solid-state fluorescence. The single crystal X-ray diffraction analysis of one of them showed that the molecules are arranged in the form of π-dimers which may lead to excimer emission. The large Stokes shifts and the broad-band emission of these 3-aroylbenzocoumarins in solid/aggregation state demonstrated the probable formation of excimers. The shapes of benzocoumarin units have a great effect on the AIE behaviors. The linear benzocoumarin derivatives show larger Stokes shifts, while the bent-benzocoumarin derivatives exhibit better AIE performances. All of them show aggregation-enhanced excimer emission which is supported by the large Stokes shifts. The electronic effect of 3-aroyl groups also has a certain effect on their fluorescence properties. The polymorphism phenomenon was observed for one of the benzoyl-containing derivatives. Additionally, two of the derivatives containing methoxy group were successfully used for cell imaging.

RESUMEN

High ambipolar mobility emissive conjugated polymers (HAME-CPs) are perfect candidates for organic optoelectronic devices, such as polymer light emitting transistors. However, due to intrinsic trade-off relationship between high ambipolar mobility and strong solid-state luminescence, the development of HAME-CPs suffers from high structural and synthetic complexity. Herein, a universal design principle and simple synthetic approach for HAME-CPs are developed. A series of simple non-fused polymers composed of charge transfer units, π bridges and emissive units are synthesized via a two-step microwave assisted C-H arylation and direct arylation polymerization protocol with high total yields up to 61 %. The synthetic protocol is verified valid among 7 monomers and 8 polymers. Most importantly, all 8 conjugated polymers have strong solid-state emission with high photoluminescence quantum yields up to 24 %. Furthermore, 4 polymers exhibit high ambipolar field effect mobility up to 10-2 cm2 V-1 s-1, and can be used in multifunctional optoelectronic devices. This work opens a new avenue for developing HAME-CPs by efficient synthesis and rational design.

RESUMEN

Macrocyclic arenes show conformational adaptability, which allows host-guest complexations with the size-matched guest molecules. However, their emission properties are often poor in the solid states due to the self-absorption. Herein, we newly synthesized pillar[6]arene derivatives having alternate methylene and nitrogen bridging structures. Solvatochromic study reveals that the nitrogen-embedding into the cyclic structures can strengthen the intramolecular charge transfer (CT) nature compared to that of the linear nitrogen-bridged precursor. Owing to the large Stokes shift in the solid state, one of the nitrogen-embedded pillar[6]arenes shows high absolute photoluminescence quantum yield (ΦPL=0.36). Furthermore, it displays a turn-off sensing ability toward nitrobenzene (NB) vapor; a fluorescence quenching is observed when exposed to the NB vapor. From the structural analysis before and after the exposure of NB vapor, the amorphous nitrogen-embedded pillar[6]arene efficiently co-crystallize with NB and formed non-emissive intermolecular CT complexes with NB.

RESUMEN

Symmetric and unsymmetric diaroyl-S,N-ketene acetals can be readily accessed in consecutive syntheses in good to excellent yields by exploiting the inherent nucleophilic character of the methine position. Different aroyl-S,N-ketene acetals as well as acid chlorides yield a library of 19 diaroyl compounds with substitution and linker pattern-tunable emission properties, leading to a significant red-shift of emission in the solid and aggregated state, which was thoroughly investigated. Additionally, the stability of the luminescent aggregates is highly increased. In a follow-up one-pot procedure, pyrazolo-S,N-ketene acetals can easily be accessed employing a nucleophilic cyclocondensation.

RESUMEN

Low-valent main group compounds that fluoresce in the solid-state were previously unknown. To address this, we investigated room-temperature photoluminescence from a series of crystals of germylenes 3-8 in this article; they exhibited emissions nearly reaching the NIR. Germylene carboxylates (3-8) were synthesized by reacting dipyrromethene stabilized germylene pyrrolide (2) with carboxylic acids such as acetic acid, trifluoroacetic acid, benzoic acid, p-cyanobenzoic acid, p-nitrobenzoic acid, and acetylsalicylic acid.

RESUMEN

We report the growth and photophysical characterization of two polar hybrid lead halide phases, methylenedianiline lead iodide and bromide, (MDA)Pb2I6 and (MDA)Pb2Br6, respectively. The phases crystallize in noncentrosymmetric space group Fdd2, which produces a highly oriented molecular dipole moment that gives rise to second harmonic generation (SHG) upon excitation at 1064 nm. While both compositions are isostructural, the size dependence of the SHG signal suggests that the bromide exhibits a stronger phase-matching response whereas the iodide exhibits a significantly weaker non-phase-matching signal. Similarly, fluorescence from (MDA)Pb2Br6 is observed around 630 nm below 75 K whereas only very weak luminescence from (MDA)Pb2I6 can be seen. We attribute the contrasting optical properties to differences in the character of the halide sublattice and postulate that the increased polarizability of the iodide ions acts to screen the local dipole moment, effectively reducing the local electric field in the crystals.

RESUMEN

The development of dual-state emissive (DSE) fluorophores, i. e. organic molecules showing balanced emission in both solution and as molecular solids, has recently become an emerging approach in material science, biology, sensing, and optoelectronics. However, the majority of existing DSE fluorophores represents structural modifications of the scaffolds known for their aggregation-induced emission (AIE) properties, e. g., tetraphenylethylenes (TFE), triphenylamines (TFA), and others. In this study, we introduce aurones as an easily accessible scaffold for the construction of DSE fluorophores and describe the main design principles allowing to achieve the balanced emission in both solution and solid state. Herein, we present the solid-state fluorescence in a systematic series of aurone derivatives for the first time. We propose that the newly found DSE properties of aurones in combination with their established biological activity can be applied efficiently in biomedical studies and diagnostic tools.

RESUMEN

Macrocyclic dications 22+ composed of two triarylmethylium units were designed and synthesized. In contrast to the reference monocations 1+ , macrocyclic dications 22+ exhibited mechanochromic emission extending to the red region (-900 nm), since the luminescence color in a solid state can reversibly change due to their constrained structures granted by alkylene linkers and the choice of a proper counterion. X-ray diffraction and spectroscopic analyses revealed that such mechanochromic behavior was induced by the crystal-to-amorphous transition. A change in the intermolecular interaction of macrocyclic dications 22+ would be the key to realizing a change in the emission pattern, since the color of the molecules did not change by applying mechanical stimuli. These findings may suggest a design strategy for creating a variety of stimuli-responsive materials, especially for carbocation-based fluorescent materials.

RESUMEN

Herein, we report the unique solid-state excimer emission of three types of acridine-tethered o-carboranes with variable degrees of methylation at the o-carborane unit. They all showed columnar packing structures based on dimer formation, and two types of π-overlapping motifs were alternately stacked. From the photoluminescence (PL) measurements on the crystalline samples, it was found that three types of luminescence bands can simultaneously appear: monomer emission, excimer emission from the moderately π-stacked intra-dimer unit, and excimer emission from the widely π-stacked inter-dimer unit. Consequently, the PL colors were drastically changed by the steric effect of the methyl groups, with a strong correlation found between the π-overlapping and excimer character. In addition, variable-temperature PL measurements revealed that these PL species should be in thermal equilibrium at room temperature, with the intensity ratios sensitive toward temperature changes.

RESUMEN

For a long time, luminescence phenomena were strictly distinguished between the emission of isolated molecules in dilute solutions or close-packed structures such as in powders or aggregates. This changed with the breakthrough observation of dual-state efficient materials, which led to a rapid boost of publications examining the influence of structural features to achieve balanced emission with disregarded molecular surroundings. Some first general structural design concepts have already been proposed based on reoccurring patterns and pivotal motifs. However, we have found another way to classify these solution and solid-state emitters (SSSEs). Hence, this minireview aims to present an overview of published structural features of SSSEs while shining light on design concepts from a more generalized perspective. Since SSSEs are believed to bridge the gap of hitherto known aggregation-sensitive compound classes, we hope to give future scientists a versatile tool in hand to efficiently design novel luminescent materials.

RESUMEN

Aroyl-S,N-ketene acetals are a novel highly diverse class of aggregation-induced emission fluorogens (AIEgens) with a plethora of interesting properties. An expanded compound library of more than 110 dyes set the stage for the first qualitative control and tuneability of all aspects of their photophysical properties. The interplay of substituents not only allows tuning and prediction of the emission color, but also of the intensity, and quantum yields both in solids and in the aggregated state; these can be rationalized by scrutinizing intermolecular interactions in the crystalline solid state.

Asunto(s)

RESUMEN

The small Stokes shift and weak emission in the solid state are two main shortcomings associated with the boron-dipyrromethene (BODIPY) family of dyes. This study presents the design, synthesis and luminescent properties of boron difluoro complexes of 2-aryl-5-alkylamino-4-alkylaminocarbonylthiazoles. These dyes display Stokes shifts (Δλ, 77-101 nm) with quantum yields (ϕFL ) up to 64.9 and 34.7 % in toluene solution and in solid state, respectively. Some of these compounds exhibit dual fluorescence and room-temperature phosphorescence (RTP) emission properties with modulable phosphorescence quantum yields (ϕPL ) and lifetime (τp up to 251 µs). The presence of intramolecular H-bonds and negligible π-π stacking revealed by X-ray crystal structure might account for the observed large Stokes shift and significant solid-state emission of these fluorophores, while the enhanced spin-orbit coupling (SOC) of iodine and the self-assembly driven by halogen bonding, π-π and C-H… π interactions could be responsible for the observed RTP of iodine containing phosphors.

RESUMEN

A new highly water-soluble 1,8-naphthalimide fluorophore designed on the "fluorophore-spacer-receptor1-receptor2" model has been synthesized. Due to the unusually high solubility in water, the novel compound proved to be a selective PET-based probe for the determination of pHs in aqueous solutions and rapid detection of water content in organic solvents. Based on the pH dependence of the probe and its high water solubility, the INH logic gate was achieved using NaOH and water as chemical inputs, where NaOH is the disabler and the water is an enabler. In addition, the probe showed effective fluorescence "off-on" reversibility on glass support after exposure to acid and base vapors, which defines it as a promising platform for rapid detection of acid/base vapors in the solid-state, thus extending the molecular sensing concept from solution to the solid support.

Asunto(s)

RESUMEN

Pyracylene is a unique cyclopenta-fused polycyclic aromatic hydrocarbon (CP-PAH) that exhibits dual aromatic characteristics. Herein we report the synthesis of doubly N-doped benzannulated pyracylenes, namely dibenzodiazapyracylenes, by oxidative N-N linking reaction of [2.2](2,5)pyrrolophane-type precursors. Dibenzodiazapyracylenes displayed well-ordered π-stacked molecular packing in the solid state, which were feasible for effective hole-transporting along the stacking direction. High carrier mobility was estimated by microwave conductivity measurements as compared to dibenzoullazine. The high HOMO level of dibenzodiazapyracylene was verified by electrochemistry and its persistent radical cation species has been detected.

RESUMEN

Anthracene derivatives are one of the most promising blue emitters employed in organic light-emitting devices (OLEDs) because of their electrochemical and thermal stabilities. However, their high crystallinity owing to their large π-planar structures severely impedes the progress in the development of solution-based systems. In this work, we developed two types of highly soluble multifunctional anthracene derivatives terminated with ortho-biphenyl and triphenylamine moieties and showed high solubility in general organic solvents such as toluene, tetrahydrofuran, and cyclohexanone at high concentrations (>10 mg mL-1 ), and showed blue emission with a peak wavelength of ∼465 nm and a high photoluminescence quantum yield that ranges up to 81 %. Notably, these emitters are suitable for fabricating both evaporation- and solution-based systems. The evaporation-based system OLED achieved a high external quantum efficiency (EQE) of 5.4 %. While the solution-processed system realized 4.8 %, exhibiting the best performance among the anthracene-based solution-processed OLEDs so far.