RESUMEN
Currently, inhomogeneous distribution of Zn2+ on the surface of the Zn anode is still the essential reason for dendrite formation and unsatisfactory stability of zinc ion batteries. Given the merits of strong interaction between Sn and Zn, as well as a low nucleation barrier during Zn deposition, the combination of metallic Sn with carbon material is expected to improve the deposition of zinc ions and inhibit the growth of zinc dendrites by guiding the homogeneous plating/stripping of zinc on the electrode surface. In this article, zincophilic Sn nanoparticles with low nucleation barriers and strong interaction with Zn2+ were embedded into 3D N-doped carbon nanofibers using a simple electrostatic spinning technique. Accordingly, when serving as an artificial coating layer for the zinc metal anode, an ultrastable Sn@NCNFs@Zn||Sn@NCNFs@Zn symmetric cell can be achieved for over 3500 h with a low nucleation overpotential of 29.1 mV. Significantly, the full cell device assembled with the as-prepared anode and MnO2 cathode exhibits desirable electrochemical behaviors. Moreover, this simple method could be extended to other metal-carbon composites, and to ensure ease in scaling up as required. Such significant approach can provide an effective strategy for the design of high-performance zinc anodes.
RESUMEN
3D substrate with abundant sodiophilic active sites holds promise for implementing dendrite-free sodium metal anodes and high-performance sodium batteries. However, the heightened electrode/electrolyte side reactions stemming from high specific surface area still hinder electrode structure stability and cycling reversibility, particularly under high current densities. Herein, the solid electrolyte interface (SEI) component is regulated and detrimental side reactions are restrained through the uniform loading of Na-Sn alloy onto a porous 3D nanofiber framework (NaSn-PCNF). The strong interaction between Na-Sn alloy and PF6 - anions facilitates the dissociation of sodium salts and releases more free sodium ions for effective charge transfer. Simultaneously, the modulations of the interfacial electrolyte solvation structure and the construction of a high NaF content SEI layer stabilize the electrode/electrolyte interface. NaSn-PCNF symmetrical battery demonstrates stable cycling for over 600 h with an ultralow overpotential of 24.5 mV under harsh condition of 10â mA cm-2 and 10 mAh cm-2. Moreover, the full cells and pouch cells exhibit accelerated reaction kinetics and splendid capacity retention, providing valuable insights into the development of advanced Na substrates for high-energy sodium metal batteries.
RESUMEN
Modification of three-dimensional (3D) carbon hosts with metal oxides has been considered as advantageous for the formation of Li2O-rich solid electrolyte interface (SEI), which can show fast Li+ diffusion, and meanwhile alleviate dendrite problems caused by fragility and nonuniformity of native SEIs. However, the lack of convincing experimental evidence has made it difficult to unveil the true origin of oxygen in Li2O-rich SEIs until now. Herein, CoOx embedded carbon nanofibers (CNF-CoOx) are successfully prepared as high-performance Li anode hosts. By employing 18O isotope labeling, the role of CoOx during SEI evolution is elucidated, revealing that CoOx contributes significantly to Li2O formation by delivering oxygen. Benefiting from the rich Li2O content, the as-formed SEIs greatly improve the Li+ migration kinetics, and therefore, the CNF-CoOx@Li anode can exhibit excellent cycling stability in half, symmetrical, and full cells.
RESUMEN
Energy storage devices operating at low temperatures are plagued by sluggish kinetics, reduced capacity, and notorious dendritic growth. Herein, novel potassium dual-ion batteries (PDIBs) capable of superior performance at -60 °C, and fabricated by combining MXenes and polytriphenylamine (PTPAn) as the anode and cathode, respectively, are presented. Additionally, the reason for the anomalous kinetics of K+ (faster at low temperature than at room temperature) on the Ti3C2 anode is investigated. Theoretical calculations, crossover experiments, and in situ XRD at room and low temperatures revealed that K+ tends to bind with solvent molecules rather than anions at subzero temperatures, which not only inhibits the participation of PF6 - in the formation of the solid electrolyte interphase (SEI), but also guarantees co-intercalation behavior and suppresses undesirable K+ storage. The advantageous properties at low temperatures endow the Ti3C2 anode with fast K+ kinetics to unlock the outstanding performance of PDIB at ultralow temperatures. The PDIBs exhibit superior rate capability and high capacity retention at -40 °C and -60 °C. Impressively, after charging-discharging for 20,000â cycles at -60 °C, the PDIB retained 86.7 % of its initial capacity. This study reveals the influence of temperatures on MXenes and offers a unique design for dual-ion batteries operating at ultralow temperatures.
RESUMEN
In situ construction of solid electrolyte interfaces (SEI) is an effective strategy to enhance the reversibility of zinc (Zn) anodes. However, in situ SEI to afford high reversibility under high current density conditions (≥20â mA cm-2) is highly desired yet extremely challenging. Herein, we propose a dual reaction strategy of spontaneous electrostatic reaction and electrochemical decomposition for the in situ construction of SEI, which is composed of organic-rich upper layer and inorganic-rich inner layer. Particularly, in situ SEI performs as "growth binder" at small current density and "orientation regulator" at high current density, which significantly suppresses side reactions and dendrite growth. The in situ SEI affords the record-breaking reversibility of Zn anode under practical conditions, Zn//Zn symmetric cells can stably cycle for over 1300â h and 400â h at current densities of 50â mA cm-2 and 100â mA cm-2, respectively, showcasing an exceptional cumulative capacity of 67.5â Ah cm-2. Furthermore, the practicality of this in situ SEI is verified in Zn//PANI pouch cells with high mass loading of 25.48â mg cm-2. This work provides a universal strategy to design advanced SEI for practical Zn-ion batteries.
RESUMEN
Low temperature has been a major challenge for lithium-ion batteries (LIBs) to maintain satisfied electrochemical performance, and the main reason is the deactivation of electrolyte with the decreasing temperature. To address this point, in present work, we develop a low-temperature resistant electrolyte which includes ethyl acetate (EA) and fluoroethylene carbonate (FEC) as solvent and lithium difluoro(oxalato)borate (LiDFOB) as the primary lithium salt. Due to the preferential decomposition of LiDFOB and FEC, a solid electrolyte interface rich in LiF is formed on the lithium metal anodes (LMAs) and lithium cobalt oxide (LCO) cathodes, contributing to higher stability and rapid desolvation of Li+ ions. The batteries with the optimized electrolyte can undergo cycling tests at -40 °C, with a capacity retention of 83.9 % after 200 cycles. Furthermore, the optimized electrolyte exhibits excellent compatibility with both LCO cathodes and graphite (Gr) anodes, enabling a Gr/LCO battery to maintain a capacity retention of 90.3 % after multiple cycles at -25 °C. This work proposes a cost-effective electrolyte that can activate potential LIBs in practical scenarios, especially in low-temperature environments.
RESUMEN
In conventional lithium-ion batteries (LIBs), the active lithium from the lithium-containing cathode is consumed by the formation of a solid electrolyte interface (SEI) at the anode during the first charge, resulting in irreversible capacity loss. Prelithiation additives can provide additional active lithium to effectively compensate for lithium loss. Lithium oxalate is regarded as a promising ideal cathode prelithiation agent; however, the electrochemical decomposition of lithium oxalate is challenging. In this work, a hollow and porous composite microsphere was prepared using a mixture of lithium oxalate, Ketjen Black and transition metal oxide catalyst, and the formulation was optimized. Owing to the compositional and structural merits, the decomposition voltage of lithium oxalate in the microsphere was reduced to 3.93 V; when being used as an additive, there is no noticeable side effect on the performance of the cathode material. With 4.2% of such an additive, the first discharge capacity of the LiFePO4âgraphite full cell increases from 139.1 to 151.9 mAh g-1, and the coulombic efficiency increases from 88.1% to 96.3%; it also facilitates the formation of a superior SEI, leading to enhanced cycling stability. This work provides an optimized formula for developing an efficient prelithiation agent for LIBs.
RESUMEN
The development of lithium metal batteries (LMBs) is severely hindered owing to the limited temperature window of the electrolyte, which renders uncontrolled side reactions, unstable electrolyte/electrode interface (EEI) formation, and sluggish desolvation kinetics for wide temperature operation condition. Herein, we developed an all-fluorinated electrolyte composed of lithium bis(trifluoromethane sulfonyl)imide, hexafluorobenzene (HFB), and fluoroethylene carbonate, which effectively regulates solvation structure toward a wide temperature of 160 °C (-50 to 110 °C). The introduction of thermostable HFB induces the generation of EEI with a high LiF ratio of 93%, which results in an inhibited side reaction and gas generation on EEI and enhanced interfacial ion transfer at extreme temperatures. Therefore, an unparalleled capacity retention of 88.3% after 400 cycles at 90 °C and an improved cycling performance at -50 °C can be achieved. Meanwhile, the practical 1.3 Ah-level pouch cell delivers high energy density of 307.13 Wh kg-1 at 60 °C and 277.99 Wh kg-1 at -30 °C after 50 cycles under lean E/C ratio of 2.7 g/Ah and low N/P ratio of 1.2. This work not only offers a viable strategy for wide-temperature-range electrolyte design but also promotes the practicalization of LMBs.
RESUMEN
Two different types of electrolytes (co-solvent and multi-salt) are tested for use in high voltage LiNi0.5Mn1.5O4||Si/graphite full cells and compared against a carbonate-based standard LiPF6 containing electrolyte (baseline). Ex situ postmortem XPS analysis on both anodes and cathodes over the life span of the cells reveals a continuously growing SEI and CEI for the baseline electrolyte. The cells cycled in the co-solvent electrolyte exhibited a relatively thick and long-term stable CEI (on LNMO), while a slowly growing SEI was determined to form on the Si/graphite. The multi-salt electrolyte offers more inorganic-rich SEI/CEI while also forming the thinnest SEI/CEI observed in this study. Cross-talk is identified in the baseline electrolyte cell, where Si is detected on the cathode, and Mn is detected on the anode. Both the multi-salt and co-solvent electrolytes are observed to substantially reduce this cross-talk, where the co-solvent is found to be the most effective. In addition, Al corrosion is detected for the multi-salt electrolyte mainly at its end-of-life stage, where Al can be found on both the anode and cathode. Although the co-solvent electrolyte offers superior interface properties in terms of the limitation of cross-talk, the multi-salt electrolyte offers the best overall performance, suggesting that interface thickness plays a superior role compared to cross-talk. Together with their electrochemical cycling performance, the results suggest that multi-salt electrolyte provides a better long-term passivation of the electrodes for high-voltage cells.
RESUMEN
The unstable solid electrolyte interface (SEI) formed by uncontrollable electrolyte degradation, which leads to dendrite growth and Coulombic efficiency decay, hinders the development of Li metal anodes. A controllable desolvation process is essential for the formation of stable SEI and improved lithium metal deposition behavior. Here, we show a functional artificial interface protective layer comprised of chondroitin sulfate-reduced graphene oxide (CrG), on which polar functional groups are distributed to effectively reduce the energy barrier for desolvation of Li+ and effectively alienate solvent molecules to avoid solvent involvement in SEI formation, thus promoting the formation of a LiF-rich SEI. Consequently, stable Coulombic efficiencies of 98.4% were achieved after 500 cycles in a Li//Cu cell. Moreover, the LiFePO4 full cells achieve steady circulation (470 cycles at 80%, 1 C) with a negative/positive electrode capacity ratio of 2.87. Our multifunctional artificial interface protective layer provides a new way to advance Li metal batteries.
RESUMEN
Organic acid treatment can facilitate the in-situ formation of a solid electrolyte interface (SEI) on Zn foil protecting the anode from corrosion. However, the generation of hydrogen (H2) during this process is inevitable, which is often considered detrimental to getting compact SEI. Herein, a H2 film-assisted method is proposed under concentrated Amino-Trimethylene-Phosphonic-Acid to construct ultrathin and dense SEI within 1 min. Specifically, the (002) crystal planes survive from the etching process of 1 min due to the adhered H2, inducing uniform deposition and enhanced corrosion-resistance. Moreover, the H2 can effectively regulate the reaction rate, leading to ultrathin SEI and initiating a morphology preservation behavior, which has been neglected by the previous reports. The quick-formed SEI has excellent compatibility, low resistance and effective isolation of electrolyte/anode, whose advantages work together with exposed (002) planes to get accustomed to high-current surge, leading to the ZAC1@Zn//ZAC1@Zn consistently cycling over 800 h at 15 mA cm-2 and 15 mAh cm-2, the ZAC1@Zn//Cu preserves high reversibility (CE 99.7 %), and the ZAC1@Zn//MVO exhibits notable capacity retention at 191.7 mAh/g after 1000 cycles.
RESUMEN
The instability of the solid electrolyte interface (SEI) is a critical challenge for the zinc metal anodes, leading to an erratic electrode/electrolyte interface and hydrogen evolution reaction (HER), ultimately resulting in anode failure. This study uncovers that the fluorine species dissolution is the root cause of SEI instability. To effectively suppress the F- dissolution, an introduction of a low-polarity molecule, 1,4-thioxane (TX), is proposed, which reinforces the stability of the fluorine-rich SEI. Moreover, the TX molecule has a strong affinity for coordinating with Zn2+ and adsorbing at the electrode/electrolyte interface, thereby diminishing the activity of local water and consequently impeding SEI dissolution. The robust fluorine-rich SEI layer promotes the high durability of the zinc anode in repeated plating/stripping cycles, while concurrently suppressing HER and enhancing Coulombic efficiency. Notably, the symmetric cell with TX demonstrates exceptional electrochemical performance, sustaining over 500â hours at 20â mA cm-2 with 10â mAh cm-2. Furthermore, the Zn||KVOH full cell exhibits excellent capacity retention, averaging 6.8â mAh cm-2 with 98 % retention after 400â cycles, even at high loading with a lean electrolyte. This work offers a novel perspective on SEI dissolution as a key factor in anode failure, providing valuable insights for the electrolyte design in energy storage devices.
RESUMEN
Silicon is considered as the next-generation anode material for lithium-ion batteries due to its high theoretical specific capacity and abundant crustal abundance. However, its poor electrical conductivity results in slow diffusion of lithium ions during battery operation. Simultaneously, the alloying process of silicon undergoes a 300 % volume change, leading to structural fractures in silicon during the cycling process. As a result, it loses contact with the current collector, continuously exposing active sites, and forming a sustained solid electrolyte interface (SEI) membrane. This paper presents the design of a fluorine-ion-regulated yolk-shell carbon-silicon anode material, highlighting the following advantages: (a) Alleviating volume changes through the design of a yolk-shell structure, thereby maintaining material structural integrity during cycling. (b) Carbon shell prevents silicon from coming into contact with the electrolyte, simultaneously improving silicon's electrical conductivity and increasing ion/electron conductivity. (c) Utilizing fluorine-ion interface modification to obtain an SEI membrane rich in fluorine components (such as LiF), thereby enhancing its long cycling performance. The F-Si@Void@C exhibits outstanding electrochemical performance, with a reversible capacity of 1166 mAh/g after 900 cycles at a current density of 0.5 A/g.
RESUMEN
Aqueous zinc ion batteries (AZIBs) with metallic Zn anode have the potential for large-scale energy storage application due to their cost-effectiveness, safety, environmental-friendliness, and ease of preparation. However, the concerns regarding dendrite growth and side reactions on Zn anode surface hamper the commercialization of AZIBs. This review aims to give a comprehensive evaluation of the protective interphase construction and provide guidance to further improve the electrochemical performance of AZIBs. The failure behaviors of the Zn metal anode including dendrite growth, corrosion, and hydrogen evolution are analyzed. Then, the applications and mechanisms of the constructed interphases are introduced, which are classified by the material species. The fabrication methods of the artificial interfaces are summarized and evaluated, including the in-situ strategy and ex-situ strategy. Finally, the characterization means are discussed to give a full view for the study of Zn anode protection. Based on the analysis of this review, a stable and high-performance Zn anode could be designed by carefully choosing applied material, corresponding protective mechanism, and appropriate construction technique. Additionally, this review for Zn anode modification and construction techniques for anode protection in AZIBs may be helpful in other aqueous metal batteries with similar problems.
RESUMEN
Among silicon-based anode family for Li-ion battery technology, SiOx, a nonstoichiometric silicon suboxide holds the potential for significant near-term commercial impact. In this context, this study mainly focuses on demonstrating an innovative SiOx@C anode design that adopts a pre-lithiation strategy based on in situ pyrolysis of Li-salt of silsesquioxane trisilanolate without the need for lithium metal or active lithium compounds and creates dual carbon encapsulation of SiOC nanodomains by simply one-step thermal treatment. This ingenious design ensures the pre-lithiation process and pre-lithiation material with high-environmental stability. Moreover, phenyl-rich organosiloxane clusters and polyacrylonitrile polymers are expected to serve as internal and external carbon source, respectively. The formation of an interpenetrating and continuous carbon matrix network would not only synergistically offer an improved electrochemical accessibility of active sites but also alleviate the volume expansion effect during cycling. As a result, this new type of anode delivered a high reversible capacity, remarkable cycle stability as well as excellent high-rate capability. In particular, the L2-SiOx@C material has a high initial coulomb efficienc of 80.4% and, after 500 cycles, a capacity retention as high as 97.5% at 0.5 A g-1 with a reversible specific capacity of 654.5 mA h g-1.
RESUMEN
Simple magnesium (Mg) salt solutions are widely considered as promising electrolytes for next-generation rechargeable Mg metal batteries (RMBs) owing to the direct Mg2+ storage mechanism. However, the passivation layer formed on Mg metal anodes in these electrolytes is considered the key challenge that limits its applicability. Numerous complex halogenide additives have been introduced to etch away the passivation layer, nevertheless, at the expense of the electrolyte's anodic stability and cathodes' cyclability. To overcome this dilemma, here, we design an electrolyte with a weakly coordinated solvation structure which enables passivation-free Mg deposition while maintaining a high anodic stability and cathodic compatibility. In detail, we successfully introduce a hexa-fluoroisopropyloxy (HFIP-) anion into the solvation structure of Mg2+, the weakly [Mg-HFIP]+ contact ion pair facilitates Mg2+ transportation across interfaces. As a consequence, our electrolyte shows outstanding compatibility with the RMBs. The Mg||PDI-EDA and Mg||Mo6S8 full cells use this electrolyte demonstrating a decent capacity retention of â¼80% over 400 cycles and 500 cycles, respectively. This represents a leap in cyclability over simple electrolytes in RMBs while the rest can barely cycle. This work offers an electrolyte system compatible with RMBs and brings deeper understanding of modifying the solvation structure toward practical electrolytes.
RESUMEN
Presodiation has shown great promise in compensating sodium storage losses. In the absence of a mechanistic understanding of how presodiation affects the surface of an electrode material, packaging optimization is restricted. Focusing on interfaces, we illustrate the working principle of presodiation in virtue of short-circuiting internal circuits. The presodiated carbon nanotubes (PS-CNTs) provide a thin, denser, and more robust solid electrolyte interfacial layer, enabling a high initial Coulombic efficiency (ICE), high power density, and cycling stability with the merits of uniformly distributed NaF. As a result, our assembled sodium-ion battery (SIB) full cell with PS-CNT has an ICE of 91.6% and an energy density of 226 Wh kg-1, which was superior to the pristine CNT control electrode (ICE of 42.9% and energy density of 163 Wh kg-1). The gained insights can be practically applied to directly promote the commercial uses of carbon-based materials in sodium-ion batteries.
RESUMEN
Aqueous aluminum-ion batteries (AAIBs) are considered as a promising alternative to lithium-ion batteries due to their large theoretical capacity, high safety, and low cost. However, the uneven deposition, hydrogen evolution reaction (HER), and corrosion during cycling impede the development of AAIBs, especially under a harsh environment. Here, a hydrated eutectic electrolyte (AATH40) composed of Al(OTf)3, acetonitrile (AN), triethyl phosphate (TEP), and H2O was designed to improve the electrochemical performance of AAIBs in a wide temperature range. The combination of molecular dynamics simulations and spectroscopy analysis reveals that AATH40 has a less-water-solvated structure [Al(AN)2(TEP)(OTf)2(H2O)]3+, which effectively inhibits side reactions, decreases the freezing point, and extends the electrochemical window of the electrolyte. Furthermore, the formation of a solid electrolyte interface, which effectively inhibits HER and corrosion, has been demonstrated by X-ray photoelectron spectroscopy, X-ray diffraction tests, and in situ differential electrochemical mass spectrometry. Additionally, operando synchrotron Fourier transform infrared spectroscopy and electrochemical quartz crystal microbalance with dissipation monitoring reveal a three-electron storage mechanism for the Al//polyaniline full cells. Consequently, AAIBs with this electrolyte exhibit improved cycling stability within the temperature range of -10-50 °C. This present study introduces a promising methodology for designing electrolytes suitable for low-cost, safe, and stable AAIBs over a wide temperature range.
RESUMEN
Background: Lithium-ion batteries are globally prominent and extensively employed alternative energy sources with decisive applications. In depth understanding of influences of various charging and discharging cycles on electrode materials and life span of these batteries is critical as cycle-life and safety of lithium-ion batteries are closely related crystallinity of electrode materials. This study is a detailed investigation endeavor in observing the degree of damage to electrode materials under multiple charging and discharging cycles. Method: ology: A constant current-sinusoidal reflex charging method (CC-Sinusoidal) was implemented to charge commercial cathode Lithium cobalt oxide (LiCoO2) electrodes and anode graphite electrodes in comparison to the conventional charging method of constant current-constant voltage (CC-CV). After 100, 300, and 500 cycles of charging and discharging, EIS, SEM, XRD, and Raman spectroscopies were used to compare the degree of electrode damage caused by different charging methods. Significant outcomes: The structure of positive LiCoO2 electrode of the battery was observed to be stable, with no significant change in both the charging methods after 500 cycles. The use of CC-CV charging method had caused severe damages to graphite electrode with generation of solid electrolyte interface (SEI) films. The CC-Sinusoidal charging method had maintained the electrode material in a relatively ideal state.
RESUMEN
Although sodium-ion batteries (SIBs) offer promising low-cost alternatives to lithium-ion batteries (LIBs), several challenges need to be overcome for their widespread adoption. A primary concern is the optimization of carbon anodes. Graphite, vital to the commercial viability of LIBs, has a limited capacity for sodium ions. Numerous alternatives to graphite are explored, particularly focusing on disordered carbons, including hard carbon. However, compared with graphite, most of these materials underperform in LIBs. Furthermore, the reaction mechanism between carbon and sodium ions remains ambiguous owing to the structural diversity of disordered carbon. A straightforward mechanical approach is introduced to enhance the sodium ion storage capacity of graphite, supported by comprehensive analytical techniques. Mechanically activated graphite delivers a notable reversible capacity of 290.5 mAh·g-1 at a current density of 10 mA·g-1. Moreover, it maintains a capacity of 157.7 mAh·g-1 even at a current density of 1 A·g-1, benefiting from the defect-rich structure achieved by mechanical activation. Soft X-ray analysis revealed that this defect-rich carbon employs a sodium-ion storage mechanism distinct from that of hard carbon. This leads to an unexpected reversible reaction on the solid electrolyte surface. These insights pave the way for innovative design approaches for carbon electrodes in SIB anodes.