RESUMEN

In this work, we build a computationally inexpensive, data-driven model that utilizes atomistic structure information to predict the reactivity of interfaces between any candidate solid-state electrolyte material and a Li metal anode. This model is trained on data from ab initio molecular dynamics (AIMD) simulations of the time evolution of the solid electrolyte-Li metal interfaces for 67 different materials. Predicting the reactivity of solid-state interfaces with ab initio techniques remains an elusive challenge in materials discovery and informatics, and previous work on predicting interfacial compatibility of solid-state Li-ion electrolytes and Li metal anodes has focused mainly on thermodynamic convex hull calculations. Our framework involves training machine learning models on AIMD data, thereby capturing information on both kinetics and thermodynamics, and then leveraging these models to predict the reactivity of thousands of new candidates in the span of seconds, avoiding the need for additional weeks-long AIMD simulations. We identify over 300 new chemically stable and over 780 passivating solid electrolytes that are predicted to be thermodynamically unfavored. Our results indicate many potential solid-state electrolyte candidates have been incorrectly labeled unstable via purely thermodynamic approaches using density functional theory (DFT) energetics, and that the pool of promising, Li-stable solid-state electrolyte materials may be much larger than previously thought from screening efforts. To showcase the value of our approach, we highlight two borate materials that were identified by our model and confirmed by further AIMD calculations to likely be highly conductive and chemically stable with Li: LiB13C2 and LiB12PC.

RESUMEN

Garnet-type Li7La3Zr2O12 (LLZO) Li-ion solid electrolytes are promising candidates for safe, next-generation solid-state batteries. In this study, we synthesize Ga-doped LLZO (Ga-LLZO) electrolytes using a microwave-assisted solvothermal method followed by low-temperature heat treatment. The nanostructured precursor (<50 nm) produced by the microwave-assisted solvothermal process has a high surface energy, facilitating the reaction for preparing garnet-type Ga-LLZO powders (<800 nm) within a short time (<5 h) at a low calcination temperature (<700 °C). Additionally, the calcined nanostructured Ga-LLZO powder can be sintered to produce a high-density pellet with minimized grain boundaries under moderate sintering conditions (temperature: 1150 °C, duration: 10 h). The optimal doping concentration was determined to be 0.4 mol% Ga, which resulted significantly increased the ionic conductivity (1.04 × 10-3 S cm-1 at 25 °C) and stabilized the cycling performance over 1700 h at 0.4 mA cm-2. This approach demonstrates the potential to synthesize oxide-type solid electrolyte materials with improved properties for solid-state batteries.

RESUMEN

Herein, we report halide nanocomposite solid electrolytes (HNSEs) that integrate diverse oxides with alterations that allow tuning of their ionic conductivity, (electro)chemical stability, and specific density. A two-step mechanochemical process enabled the synthesis of multimetal (or nonmetal) HNSEs, MO2-2Li2ZrCl6, as verified by pair distribution function and X-ray diffraction analyses. The multimetal (or nonmetal) HNSE strategy increases the ionic conductivity of Li2ZrCl6 from 0.40 to 0.82 mS cm-1. Additionally, cyclic voltammetry test findings corroborated the enhanced passivating properties of the HNSEs. Notably, incorporating SiO2 into HNSEs leads to a substantial reduction in the specific density of HNSEs, demonstrating their strong potential for achieving a high energy density and lowering costs. Fluorinated SiO2-2Li2ZrCl5F HNSEs exhibited enhanced interfacial compatibility with Li6PS5Cl and LiCoO2 electrodes. Cells employing SiO2-2Li2ZrCl5F with LiCoO2 exhibit superior electrochemical performance delivering the initial discharge capacity of 162 mA h g-1 with 93.7% capacity retention at the 100th cycle at 60 °C.

RESUMEN

Solid-state ionic conductors find application across various domains in materials science, particularly showcasing their significance in energy storage and conversion technologies. To effectively utilize these materials in high-performance electrochemical devices, a comprehensive understanding and precise control of charge carriers' distribution and ionic mobility at interfaces are paramount. A major challenge lies in unravelling the atomic-level processes governing ion dynamics within intricate solid and interfacial structures, such as grain boundaries and heterophases. From a theoretical viewpoint, in this Perspective article, my focus is to offer an overview of the current comprehension of key aspects related to solid-state ionic interfaces, with a particular emphasis on solid electrolytes for batteries, while providing a personal critical assessment of recent research advancements. I begin by introducing fundamental concepts for understanding solid-state conductors, such as the classical diffusion model and chemical potential. Subsequently, I delve into the modelling of space-charge regions, which are pivotal for understanding the physicochemical origins of charge redistribution at electrified interfaces. Finally, I discuss modern computational methods, such as density functional theory and machine-learned potentials, which offer invaluable tools for gaining insights into the atomic-scale behaviour of solid-state ionic interfaces, including both ionic mobility and interfacial reactivity aspects. This article is part of the theme issue 'Celebrating the 15th anniversary of the Royal Society Newton International Fellowship'.

RESUMEN

The application of lithium metal anode in all-solid-state batteries has the potential to achieve both high energy density and safety performance. However, the presence of serious dendrite issues hinders this potential. Here, the ion transport pathways and orientation of dendrite growth are regulated by utilizing the differences of ionic conductivity in heterogeneous electrolytes. The in situ formed Li-Ge alloy phases from the spontaneous reaction between Li10GeP2S12 and the attracted dendrites greatly enhance the ability to resist dendrite growth. As an outcome, the heterogeneous electrolyte achieves a high critical current density of 2.1 mA cm-2 and long-term stable symmetrical battery operation (0.3 mA cm-2 for 17 000 h and 1.0 mA cm-2 for 2000 h). Besides, due to the superior interfacial stability and low interface impedance between the heterogeneous electrolyte and lithium anode, the Li||LiNi0.8Co0.1Mn0.1O2 full battery exhibits great cycling stability (80.5% after 500 cycles at 1.0 mA cm-2) and rate performance (125.4 mAh g at 2.0 mA cm-2). This work provides a unique strategy of interface regulation via heterogeneous electrolytes design, offering insights into the development of state-of the-art all-solid-state batteries.

RESUMEN

Compared to lithium (Li) anode, the alloy/Li-alloy anodes show more compatible with sulfide solid electrolytes (SSEs), and are promising candidates for practical SSE-based all-solid-state Li batteries (ASSLBs). In this work, a porous Li-Al alloy (LiAl-p) anode is crafted using a straightforward mechanical pressing method. Various characterizations confirm the porous nature of such anode, as well as rich oxygen species on its surface. To the best knowledge, such LiAl-p anode demonstrates the best room temperature cell performance in comparison with reported Li and alloy/Li-alloy anodes in SSE-based ASSLBs. For example, the LiAl-p symmetric cells deliver a record critical current density of 6.0 mA cm-2 and an ultralong cycling of 5000 h; the LiAl-p|LiNi0.8Co0.1Mn0.1O2 full cells achieve a high areal capacity of 11.9 mAh cm-2 and excellent durability of 1800 cycles. Further in situ and ex situ experiments reveal that the porous structure can accommodate volume changes of LiAl-p and ensure its integrity during cycling; and moreover, a robust Li inorganics-rich solid electrolyte interphase can be formed originated from the reaction between SSE and surface oxygen species of LiAl-p. This study offers inspiration for designing high-performance alloy anodes by focusing on designing special architecture to alleviate volume change and constructing stable interphase.

RESUMEN

Plastic-crystal-embedded elastomer electrolytes (PCEEs), produced through polymerization-induced phase separation (PIPS), are gaining popularity as solid polymer electrolytes (SPEs). However, it remains to be investigated whether all monomer molecules can achieve polymerization-induced phase separation and the corresponding differences in lithium metal battery performance. Herein, we prepared PCEEs with different functional groups (OH, CN, F) through in situ polymerization. Research findings show that PCEE containing - CN or - F achieves the separation of the plastic crystalline phase and succinonitrile (SN) phase, whereas PCEE containing OH cannot due to hydrogen bonding with the SN phase. Notably, the PCEE synthesized with the F monomer (FBA-PCEE) exhibited exceptional interfacial stability with lithium metal anodes and lithium iron phosphate (LFP) cathodes, due to its unique coordination mechanism with lithium ions. The FBA-PCEE demonstrated a high ionic conductivity (2.02 × 10-3 S cm-1) and lithium-ion migration number ( [Formula: see text]  = 0.75). Moreover, lithium symmetric cells incorporating FBA-PCEE demonstrated stable cycling performance for more than 1000 h at a current density of 0.1 mA cm-2, resulting in the development of a solid electrolyte interphase (SEI) rich in LiF, Li3N, and Li2CO3 over time. Additionally, incorporating FBA-PCEE facilitated the stable cycling of LPF over 1000 cycles at 0.5C, maintaining a capacity retention of 77.38 % after 500 cycles. When coupled with high-voltage Nickel Cobalt Manganese Oxide (NCM-622) cathodes and lithium metal anodes, a discharge capacity of 119.70 mAh g-1 at 0.1C was sustained after 100 cycles, exhibiting a capacity retention of 78.95 %. This study elucidates the critical role of monomer design in achieving PIPS, offering valuable insights into developing high-performance polymer composite electrolytes for advanced lithium metal batteries.

RESUMEN

All-solid-state batteries (ASSBs) possess the advantage of ensuring safety while simultaneously maximizing energy density, making them suitable for next-generation battery models. In particular, sulfide solid electrolytes (SSEs) are viewed as promising candidates for ASSB electrolytes due to their excellent ionic conductivity. However, a limitation exists in the form of interfacial side reactions occurring between the SSEs and cathode active materials (CAMs), as well as the generation of sulfide-based gases within the SSE. These issues lead to a reduction in the capacity of CAMs and an increase in internal resistance within the cell. To address these challenges, cathode composite materials incorporating zinc oxide (ZnO) are fabricated, effectively reducing various side reactions occurring in CAMs. Acting as a semiconductor, ZnO helps mitigate the rapid oxidation of the solid electrolyte facilitated by an electronic pathway, thereby minimizing side reactions, while maintaining electron pathways to the active material. Additionally, it absorbs sulfide-based gases, thus protecting the lithium ions within CAMs. In this study, the mass spectrometer is employed to observe gas generation phenomena within the ASSB cell. Furthermore, a clear elucidation of the side reactions occurring at the cathode and the causes of capacity reduction in ASSB are provided through density functional theory calculations.

RESUMEN

Covalent organic framework (COF) aerogels with functional groups offer exceptional processability and functionality for various applications. These hierarchical porous materials combine the advantages of COFs with the benefits of aerogels, overcoming the limitations of conventional insoluble and nonfusible COF powders. However, achieving both high crystallinity and shape retention remains a challenge for functionalized COF aerogels. In this work, we develop a novel and general solvent substitution method for the one-step synthesis of formyl-functionalized COF aerogels without harsh vacuum conditions. These aerogels exhibit excellent processing capabilities, superior mechanical strength, and enhanced functionality. As a proof-of-concept, they were used in adsorption and lithium metal battery applications, significantly maximizing the structural advantages of COFs, e.g.: (i) the hierarchical porous structure is fully wetted by the electrolyte to form continuous transport channels; (ii) the polar groups, which are easier to be acquired, help in desolvation and transfer of Li+; (iii) the regular pore structures stabilize deposition of Li+ and inhibit the growth of lithium dendrites. These combined benefits contribute to a lighter battery with improved energy density and enhanced safety.

RESUMEN

Lewis acid-base interactions are common in chemical processes presented in diverse applications, such as synthesis, catalysis, batteries, semiconductors, and solar cells. The Lewis acid-base interactions allow precise tuning of material properties from the molecular level to more aggregated and organized structures. This review will focus on the origin, development, and prospects of applying Lewis acid-base interactions for the materials design and mechanism understanding in the advancement of battery materials and chemistries. The covered topics relate to aqueous batteries, lithium-ion batteries, solid-state batteries, alkali metal-sulfur batteries, and alkali metal-oxygen batteries. In this review, the Lewis acid-base theories will be first introduced. Thereafter the application strategies for Lewis acid-base interactions in solid-state and liquid-based batteries will be introduced from the aspects of liquid electrolyte, solid polymer electrolyte, metal anodes, and high-capacity cathodes. The underlying mechanism is highlighted in regard to ion transport, electrochemical stability, mechanical property, reaction kinetics, dendrite growth, corrosion, and so on. Last but not least, perspectives on the future directions related to Lewis acid-base interactions for next-generation batteries are like to be shared.

RESUMEN

Ceramic-polymer composite solid electrolytes (CSEs) have attracted great attention by combining the advantages of polymer electrolytes and inorganic ceramic electrolytes. Herein, Li10GeP2S12 (LGPS) particles are incorporated into poly(ethylene oxide) (PEO)-based reversibly interlocked polymer networks (RILNs) derived from the topological rearrangement of two PEO networks cross-linked by reversible imine bonds and disulfide linkages. A series of highly ionic conductive, self-healing CSEs are obtained accordingly. The interlocking architecture successfully inhibits PEO crystallization, increasing the amorphous phase for Li ion transportation, and stabilizes the conductive pathways of LGPS particles by its unique confinement effect. Meanwhile, the LGPS particles cooperate with the RILN matrix, forming a filler-polymer interfacial phase for additional Li ion transportation and strengthening and toughening the resultant CSEs via the strong intermolecular Li+-O2- interactions. Furthermore, the dynamic characteristics of the included reversible bonds ensure a multiple intrinsic self-healing capability. Consequently, the CSEs containing 15 wt % LGPS deliver a high ionic conductivity (1.06 × 10-3 S cm-1) and high Li ion transference number (∼0.6) at 25 °C, a wide electrochemical stability window (>4.9 V), good mechanical properties (0.63 MPa, 377%), and a stable CSE/Li anode interface. The integrated Li/CSE/LiFePO4 battery exhibits a specific discharge capacity of 110.8 mAh g-1 at 1 C (25 °C) and a capacity retention of 76.9% after 200 cycles. Thanks to the healability, the damaged CSEs can regain the structural integrity, ion conductive capability, and cycling performance of the assembled cells. The present work provides an effective strategy to fabricate CSEs for lithium metal batteries that are workable at ambient temperature.

RESUMEN

As the core component of all-solid-state batteries, current solid-state electrolytes fail to simultaneously meet multiple demands, such as their own high performance, the chemical, electrochemical and mechanical compatibility of electrode interface. A fresh perspective is rather desired to guide the development of novel solid electrolytes with comprehensive performance. Herein, this work proposes a novel strategy to synthesize solid electrolytes extracted from cathode-electrolyte interphase (CEI), which is inspired by peach trees secreting peach gum to prevent further damage. A proof-of-concept, using LiBH4-Se and LiBH4-S as prototypes, confirms that as-synthesized electrolytes inherited and improved up the advantages of LiBH4 with unexpected compatibility toward multiple cathodes. It is believed that the family of new electrolytes will be continuously expanded under the guidance of this CEI-derived concept.

RESUMEN

Developing anode-free batteries is the ultimate goal in pursuit of high energy density and safety. It is more urgent for sodium (Na)-based batteries due to its inherently low energy density and safety hazards induced by highly reactive Na metal anodes. However, there is no electrolyte that can meet the demanding Na plating-stripping Coulomb efficiency (CE) while resisting oxidative decomposition at high voltages for building stable anode-free Na batteries. Here, a "liquid-in-solid" electrolyte design strategy is proposed to integrate target performances of liquid and solid-state electrolytes. Breaking through the Na+ transport channel of Na-containing zeolite molecular sieve by ion-exchange and confining aggregated liquid ether electrolytes in the nanopore and void of zeolites, it achieves excellent high-voltage stability enabled by solid-state zeolite electrolytes, while inheriting the ultra-high CE (99.84%) from liquid ether electrolytes. When applied in a 4.25 V-class anode-free Na battery, an ultra-high energy density of 412 W h kg-1 (based on the active material of both cathodes and anodes) can be reached, which is comparable to the state-of-the-art graphite||LiNi0.8Co0.1Mn0.1O2 lithium-ion batteries. Furthermore, the assembled anode-free pouch cell exhibits excellent cycling stability, and a high capacity retention of 89.2% can be preserved after 370 cycles.

RESUMEN

All-solid-state potassium batteries emerge as promising alternatives to lithium batteries, leveraging their high natural abundance and cost-effectiveness. Developing potassium solid electrolytes (SEs) with high room-temperature ionic conductivity is critical for realizing efficient potassium batteries. In this study, we present the synthesis of K2.98Sb0.91S3.53Cl0.47, showcasing a room-temperature ionic conductivity of 0.32 mS/cm and a low activation energy of 0.26 eV. This represents an increase of over two orders of magnitude compared to the parent compound K3SbS4, marking the highest reported ionic conductivity for non-oxide potassium SEs. Solid-state 39K magic-angle-spinning nuclear magnetic resonance on K2.98Sb0.91S3.53Cl0.47 reveals an increased population of mobile K+ ions with fast dynamics. Ab initio molecular dynamics (AIMD) simulations further confirm a delocalized K+ density and significantly enhanced K+ diffusion. This work demonstrates diversification of the anion sublattice as an effective approach to enhance ion transport and highlights K2.98Sb0.91S3.53Cl0.47 as a promising SE for all-solid-state potassium batteries.

RESUMEN

Poly(ionic liquid)s combine the unique properties of ionic liquids (ILs) within ionic polymers holding significant promise for energy storage applications. It is reported here the synthesis and characterization of a new family of poly(ionic liquid)s synthesized from cationic piperazinium ionic liquid monomers. The cationic poly(acrylamide piperazinium) in combination with sulfonamide anions like bis(trifluoromethanesulfonyl) imide (TFSI) and bis(fluorosulfonyl) imide (FSI) are characterized as solid polymer electrolytes. The polymer electrolytes in combination with pyrrolidonium ILs and LiFSI show high ionic conductivity, 5×10-3 S cm-1 at 100 °C. Piperazinium polymer electrolytes show excellent compatibility with lithium metal reversible plating and stripping at high current density and low temperature 40 °C.

Asunto(s)

RESUMEN

The commercialization of all-solid-state Li batteries (ASSLBs) demands solid electrolytes with strong cost-competitiveness, low density (for enabling satisfactory energy densities), and decent anode compatibility (the need for cathode compatibility can be circumvented by the cathode coating techniques that are widely applied in sulfide-based ASSLBs). However, none of the reported oxide, sulfide, or chloride solid electrolytes meets these requirements simultaneously. Here, we design a Li7P3S7.5O3.5 (LPSO) solid electrolyte, which shows a combination of all the aforementioned characteristics. The synthesis of this material does not need the expensive Li2S, so the raw materials cost is only $14.42/kg, which, unlike most solid electrolytes, lies below the $50/kg threshold for commercialization. The density of LPSO is 1.70 g cm-3, considerably lower than those of the oxide (typically above 5 g cm-3) and chloride (around 2.5 g cm-3) solid electrolytes. Besides, LPSO also shows excellent anode compatibility. The Li|LPSO|Li cell cycles stably with a potential of ~50 mV under 0.1 mA cm-2 for over 4200 h at 25 °C, and the all-solid-state pouch cell with the Si anode shows a capacity retention of 89.29 % after 200 cycles under 88.6 mA g-1 at 60 °C.

RESUMEN

In recent years, polysaccharides have emerged as a promising alternative for the development of environmentally friendly materials. Polysaccharide-based materials have been mainly studied for applications in the food, packaging, and biomedical industries. However, many investigations report processing routes and treatments that enable the modification of the inherent properties of polysaccharides, making them useful as materials for energy applications. The control of the ionic and electronic conductivities of polysaccharide-based materials allows for the development of solid electrolytes and electrodes. The incorporation of conductive and semiconductive phases can modify the permittivities of polysaccharides, increasing their capacity for charge storage, making them useful as active surfaces of energy harvesting devices such as triboelectric nanogenerators. Polysaccharides are inexpensive and abundant and could be considered as a suitable option for the development and improvement of energy devices. This review provides an overview of the main research work related to the use of both common commercially available polysaccharides and local native polysaccharides, including starch, chitosan, carrageenan, ulvan, agar, and bacterial cellulose. Solid and gel electrolytes derived from polysaccharides show a wide range of ionic conductivities from 0.0173 × 10-3 to 80.9 × 10-3 S cm-1. Electrodes made from polysaccharides show good specific capacitances ranging from 8 to 753 F g-1 and current densities from 0.05 to 5 A g-1. Active surfaces based on polysaccharides show promising results with power densities ranging from 0.15 to 16 100 mW m-2. These investigations suggest that in the future polysaccharides could become suitable materials to replace some synthetic polymers used in the fabrication of energy storage devices, including batteries, supercapacitors, and energy harvesting devices.

RESUMEN

Solid-state lithium metal batteries (SSLMBs) have gained significant attention in energy storage research due to their high energy density and significantly improved safety. But there are still certain problems with lithium dendrite growth, interface stability, and room-temperature practicality. Nature continually inspires human development and intricate design strategies to achieve optimal structural applications. Innovative solid-state electrolytes (SSEs), inspired by diverse natural species, have demonstrated exceptional physical, chemical, and mechanical properties. This review provides an overview of typical bionic-structured materials in SSEs, particularly those mimicking plant and animal structures, with a focus on their latest advancements in applications of solid-state lithium metal batteries. Commencing from plant structures encompassing roots, trunks, leaves, flowers, fruits, and cellular levels, the detailed influence of biomimetic strategies on SSE design and electrochemical performance are presented in this review. Subsequently, the recent progress of animal-inspired nanostructures in SSEs is summarized, including layered structures, surface morphologies, and interface compatibility in both two-dimensional (2D) and three-dimensional (3D) aspects. Finally, we also evaluate the current challenges and provide a concise outlook on future research directions. We anticipate that the review will provide useful information for future reference regarding the design of bionic-structured materials in SSEs.

RESUMEN

All-solid-state lithium (Li) batteries have attracted considerable interest due to their potential in high energy density as well as safety. However, the realization of a stable Li/solid-state electrolyte (SSE) interface remains challenging. Herein, two-dimensional graphene-like C3N4 (g-C3N4) as a coating layer on Li1.3Al0.3Ti1.7(PO4)3 (LATP) electrolyte (LATP@CN) has been applied to construct the stable Li/SSE interface. The g-C3N4 layer is uniformly coated on the LATP surface using the in situ calcination method, which not only enhances the dispersibility of LATP particles in poly(ethylene oxide) (PEO) through the interaction between surface functional groups but also suppresses the side reactions between Li and LATP. The coating layer can effectively improve the interfacial stability. As a result, the conductivity and stability of the obtained composite solid-state electrolytes (CSEs) against Li are enhanced. The Li∥CSEs∥Li symmetric cells stably cycle for 670 and 600 h at 0.1 and 0.2 mA cm-2, respectively. The Li∥CSEs∥LiFePO4 cells stably cycle more than 100 times at 0.1 and 0.2 C with a capacity retention rate of about 86% and 88%, respectively. This work inspires a new strategy to avoid the reactions between LATP and Li.

RESUMEN

Constructing composite solid electrolytes (CSEs) integrating the merits of inorganic and organic components is a promising approach to developing high-performance all-solid-state lithium metal batteries (ASSLMBs). CSEs are now capable of achieving homogeneous and fast Li-ion flux, but how to escape the trade-off between mechanical modulus and adhesion is still a challenge. Herein, a strategy to address this issue is proposed, that is, intercalating highly conductive, homogeneous, and viscous-fluid ionic conductors into robust coordination laminar framework to construct laminar solid electrolyte with homogeneous and fast Li-ion conduction (LSE-HFC). A 9 µm-thick LSH-HFC, in which poly(ethylene oxide)/succinonitrile is adsorbed by coordination laminar framework with metal-organic framework nanosheets as building blocks, is used here as an example to determine the validity. The Li-ion transfer mechanism is verified and works across the entire LSE-HFC, which facilitates homogeneous Li-ion flux and low migration energy barriers, endowing LSE-HFC with high ionic conductivity of 5.62 × 10-4 S cm-1 and Li-ion transference number of 0.78 at 25 °C. Combining the outstanding mechanical strength against punctures and the enhanced adhesion force with electrodes, LSE-HFC harvests uniform Li plating/stripping behavior. These enable the realization of high-energy-density ASSLMBs with excellent cycling stability when being assembled as LiFePO4/Li and LiNi0.6Mn0.2Co0.2O2/Li cells.