RESUMEN

To realize high-quality vascularized bone regeneration, we developed a multifunctional hydrogel (SHPP-ZB) by incorporating BMP-2@ZIF-8/PEG-NH2 nanoparticles (NPs) into a sodium alginate/hydroxyapatite/polyvinyl alcohol hydrogel loaded with PDGF-BB, allowing for the sequential release of angiogenic and osteogenic growth factors (GFs) during bone repair. ZIF-8 served as a protective host for BMP-2 from degradation, ensuring high encapsulation efficiency and long-term bioactivity. The SHPP-ZB hydrogel exhibited enhanced mechanical strength and injectability, making it suitable for complex bone defects. It provided a swelling interface for tissue interlocking and the early release of Zn2+ and tannin acid (TA) to exert antioxidant and antibacterial effects, followed by the sequential release of angiogenic and osteogenic GFs to promote high-quality vascularized bone regeneration. In vitro experiments demonstrated the superior angiogenic and osteogenic properties of SHPP-ZB compared to other groups. In vivo experiments indicated that the sequential delivery of GFs via SHPP-ZB hydrogel could improve vascularized bone regeneration. Further, RNA sequencing analysis of regenerative bone tissue revealed that SHPP-ZB hydrogel promoted vascularized bone regeneration by regulating JUN, MAPK, Wnt, and calcium signaling pathways in vivo. This study presented a promising approach for efficient vascularized bone regeneration in large-scale bone defects.

RESUMEN

Bladder tissue engineering holds promise for addressing bladder defects resulting from congenital or acquired bladder diseases. However, inadequate vascularization significantly impacts the survival and function of engineered tissues after transplantation. Herein, a novel bilayer silk fibroin (BSF) scaffold was fabricated with the capability of vascular endothelial growth factor (VEGF) and platelet derived growth factor-BB (PDGF-BB) sequential release. The outer layer of the scaffold was composed of compact SF film with waterproofness to mimic the serosa of the bladder. The inner layer was constructed of porous SF matrix incorporated with SF microspheres (MS) loaded with VEGF and PDGF-BB. We found that the 5% (w/v) MS-incorporated scaffold exhibited a rapid release of VEGF, whereas the 0.2% (w/v) MS-incorporated scaffold demonstrated a slow and sustained release of PDGF-BB. The BSF scaffold exhibited good biocompatibility and promoted endothelial cell migration, tube formation and enhanced endothelial differentiation of adipose derived stem cells (ADSCs) in vitro. The BSF patch was constructed by seeding ADSCs on the BSF scaffold. After in vivo transplantation, not only could the BSF patch facilitate the regeneration of urothelium and smooth muscle, but more importantly, stimulate the regeneration of blood vessels. This study demonstrated that the BSF patch exhibited excellent vascularization capability in bladder reconstruction and offered a viable functional bioengineered patch for future clinical studies.

RESUMEN

For every epidemic outbreak, the prevention and treatments in resource-limited areas are always out of reach. Critical to this is that high accuracy, stability, and more comprehensive analytical techniques always rely on expensive and bulky instruments and large laboratories. Here, a fully integrated and high-throughput microfluidic system is proposed for ultra-multiple point-of-care immunoassay, termed Dac system. Specifically, the Dac system only requires a handheld portable device to automatically recycle repetitive multi-step reactions including on-demand liquid releasing, dispensing, metering, collecting, oscillatory mixing, and discharging. The Dac system performs high-precision enzyme-linked immunosorbent assays for up to 17 samples or targets simultaneously on a single chip. Furthermore, reagent consumption is only 2% compared to conventional ELISA, and microbubble-accelerated reactions shorten the assay time by more than half. As a proof of concept, the multiplexed detections are achieved by detecting at least four infection targets for two samples simultaneously on a singular chip. Furthermore, the barcode-based multi-target results can rapidly distinguish between five similar cases, allowing for accurate therapeutic interventions. Compared to bulky clinical instruments, the accuracy of clinical inflammation classification is 92.38% (n = 105), with a quantitative correlation coefficient of R2 = 0.9838, while the clinical specificity is 100% and the sensitivity is 98.93%.

RESUMEN

To enhance the bioavailability of bioactives with varying efficacy in the gastrointestinal tract (GIT), a co-delivery system of solid-in-oil-in-water (S/O/W) emulsion was designed for the co-encapsulation of two bioactives in this paper. S/O/W emulsions were fabricated utilizing fucoxanthin (FUC)-loaded nanoparticles (NPs) as the solid phase, coconut oil containing curcumin (Cur) as the oil phase, and carboxymethyl starch (CMS)/propylene glycol alginate (PGA) complex as the aqueous phase. The high entrapment efficiency of Cur (82.3-91.3%) and FUC (96.0-96.1%) was found in the CMS/PGA complex-stabilized S/O/W emulsions. Encapsulation of Cur and FUC within S/O/W emulsions enhanced their UV and thermal stabilities. In addition, S/O/W emulsions prepared with CMS/PGA complexes displayed good stability. More importantly, the formed S/O/W emulsion possessed programmed sequential release characteristics, delivering Cur and FUC to the small intestine and colon, respectively. These results contributed to designing co-delivery systems for the programmed sequential release of two hydrophobic nutrients in the GIT.

Asunto(s)

Curcumina , Emulsiones , Xantófilas , Emulsiones/química , Curcumina/química , Xantófilas/química , Composición de Medicamentos , Nanopartículas/química , Tamaño de la Partícula , Estabilidad de Medicamentos , Agua/química , Sistemas de Liberación de Medicamentos , Portadores de Fármacos/química

RESUMEN

During the process of malignant tumor treatment, photodynamic therapy (PDT) exerts poor efficacy due to the hypoxic environment of the tumor cells, and long-time chemotherapy reduces the sensitivity of tumor cells to chemotherapy drugs due to the presence of drug-resistant proteins on the cell membranes for drug outward transportation. Therefore, we reported a nano platform based on mesoporous silica coated with polydopamine (MSN@PDA) loading PDT enhancer MnO2, photosensitizer indocyanine green (ICG) and chemotherapeutic drug doxorubicin (DOX) (designated as DMPIM) to achieve a sequential release of different drugs to enhance treatment of malignant tumors. MSN was first synthesized by a template method, then DOX was loaded into the mesoporous channels of MSN, and locked by the PDA coating. Next, ICG was modified by π-π stacking on PDA, and finally, MnO2layer was accumulated on the surface of DOX@MSN@PDA- ICG@MnO2, achieving orthogonal loading and sequential release of different drugs. DMPIM first generated oxygen (O2) through the reaction between MnO2and H2O2after entering tumor cells, alleviating the hypoxic environment of tumors and enhancing the PDT effect of sequentially released ICG. Afterwards, ICG reacted with O2in tumor tissue to produce reactive oxygen species, promoting lysosomal escape of drugs and inactivation of p-glycoprotein (p-gp) on tumor cell membranes. DOX loaded in the MSN channels exhibited a delay of approximately 8 h after ICG release to exert the enhanced chemotherapy effect. The drug delivery system achieved effective sequential release and multimodal combination therapy, which achieved ideal therapeutic effects on malignant tumors. This work offers a route to a sequential drug release for advancing the treatment of malignant tumors.

Asunto(s)

Doxorrubicina , Liberación de Fármacos , Verde de Indocianina , Indoles , Compuestos de Manganeso , Óxidos , Fotoquimioterapia , Fármacos Fotosensibilizantes , Polímeros , Fotoquimioterapia/métodos , Doxorrubicina/química , Doxorrubicina/farmacología , Doxorrubicina/administración & dosificación , Verde de Indocianina/química , Indoles/química , Animales , Compuestos de Manganeso/química , Humanos , Polímeros/química , Línea Celular Tumoral , Óxidos/química , Fármacos Fotosensibilizantes/química , Dióxido de Silicio/química , Ratones , Antineoplásicos/química , Antineoplásicos/farmacología , Antineoplásicos/administración & dosificación , Neoplasias/tratamiento farmacológico , Especies Reactivas de Oxígeno/metabolismo , Sistemas de Liberación de Medicamentos , Nanopartículas/química , Portadores de Fármacos/química , Porosidad

RESUMEN

Severe burn wounds usually destroy key cells' functions of the skin resulting in delayed re-epithelization and wound regeneration. Promoting key cells' activities is crucial for burn wound repair. It is well known that keratinocyte growth factor-2 (KGF-2) participates in the proliferation and morphogenesis of epithelial cells while acidic fibroblast growth factor (aFGF) is a key mediator for fibroblast and endothelial cell growth and differentiation. However, thick eschar and the harsh environment of a burn wound often decrease the delivery efficiency of fibroblast growth factor (FGF) to the wound site. Therefore, herein a novel microneedle patch for sequential transdermal delivery of KGF-2 and aFGF is fabricated to enhance burn wound therapy. aFGF is first loaded in the nanoparticle (NPaFGF) and then encapsulated NPaFGF with KGF-2 in the microneedle patch (KGF-2/NPaFGF@MN). The result shows that KGF-2/NPaFGF@MN can successfully get across the eschar and sequentially release KGF-2 and aFGF. Additional data demonstrated that KGF-2/NPaFGF@MN achieved a quicker wound closure rate with reduced necrotic tissues, faster re-epithelialization, enhanced collagen deposition, and increased neo-vascularization. Further evidence suggests that improved wound healing is regulated by significantly elevated expressions of hypoxia-inducible factor-1 alpha (HIF-1ɑ) and heat shock protein 90 (Hsp90) in burn wounds. All these data proved that KGF-2/NPaFGF@MN is an effective treatment for wound healing of burns.

Asunto(s)

Quemaduras , Agujas , Cicatrización de Heridas , Quemaduras/tratamiento farmacológico , Animales , Cicatrización de Heridas/efectos de los fármacos , Administración Cutánea , Factor 2 de Crecimiento de Fibroblastos/farmacología , Factor 2 de Crecimiento de Fibroblastos/administración & dosificación , Humanos , Nanopartículas/química , Sistemas de Liberación de Medicamentos , Ratones

RESUMEN

Existing artificial periostea face many challenges, including difficult-to-replicate anisotropy in mechanics and structure, poor tissue adhesion, and neglected synergistic angiogenesis and osteogenesis. Here, inspired by natural wood (NW), a wood-derived elastic artificial periosteum is developed to mimic the structure and functions of natural periosteum, which combines an elastic wood (EW) skeleton, a polydopamine (PDA) binder layer, and layer-by-layer (LBL) biofunctional layers. Specifically, EW derived from NW is utilized as the anisotropic skeleton of artificial periosteum to guide cell directional behaviors, moreover, it also shows a similar elastic modulus and flexibility to natural periosteum. To further enhance its synergistic angiogenesis and osteogenesis, surface LBL biofunctional layers are designed to serve as spatiotemporal release platforms to achieve sequential and long-term release of pamidronate disodium (PDS) and deferoxamine (DFO), which are pre-encapsulated in chitosan (CS) and hyaluronic acid (HA) solutions, respectively. Furthermore, the combined effect of PDA coating and LBL biofunctional layers enables the periosteum to tightly adhere to damaged bone tissue. More importantly, this novel artificial periosteum can boost angiogenesis and bone formation in vitro and in vivo. This study opens up a new path for biomimetic design of artificial periosteum, and provides a feasible clinical strategy for bone repair.

Asunto(s)

Osteogénesis , Periostio , Madera , Periostio/efectos de los fármacos , Madera/química , Animales , Osteogénesis/efectos de los fármacos , Liberación de Fármacos , Regeneración Ósea/efectos de los fármacos , Humanos , Anisotropía , Indoles/química , Indoles/farmacología , Ratones , Polímeros/química , Quitosano/química , Ácido Hialurónico/química , Ácido Hialurónico/farmacología , Neovascularización Fisiológica/efectos de los fármacos

RESUMEN

In order to overcome the problem that traditional W1/O/W2 double emulsions do not have targeted release performance, thereby better meeting the health needs of consumers, ovalbumin fibrils/pectin-based bilayer-stabilized double emulsion (OP-BDE) co-encapsulated with Lactobacillus plantarum and curcumin was constructed with pectin as the outer protective shell, which was expected to be used in the development of novel functional foods. The effects of pectin coating on the viability of Lactobacillus plantarum under conditions including storage, pasteurization, freeze-thaw cycles and in vitro simulated digestion were investigated. Results showed that pectin as protective shell could significantly enhance the tolerance of Lactobacillus plantarum to various environmental factors. Besides, the adsorption of pectin endowed OP-BDE with higher lipolysis and stronger protective effect on curcumin, remarkably improving the photostability and bioaccessibility of curcumin. In addition, in vitro simulated gastrointestinal release study indicated that OP-BDE possessed programmed sequential release property, allowing curcumin and Lactobacillus plantarum to be released in small intestine and colon, respectively. OP-BDE is the first reported co-delivery emulsion system with programmed release characteristic. This study provides new insights into OP-BDE in constructing co-delivery systems and programmed sequential release of active substances, and has potential reference and application value in actual food production.

Asunto(s)

Curcumina , Lactobacillus plantarum , Emulsiones , Curcumina/farmacología , Pectinas , Tracto Gastrointestinal

RESUMEN

CD47 blockade has emerged as a promising immunotherapy against liver cancer. However, the optimization of its antitumor effectiveness using efficient drug delivery systems or combinations of therapeutic agents remains largely incomplete. Here, patients with liver cancer co-expressing CD47 and CDC7 (cell division cycle 7, a negative senescence-related gene) are found to have the worst prognosis. Moreover, CD47 is highly expressed, and senescence is inhibited after the development of chemoresistance, suggesting that combination therapy targeting CD47 and CDC7 to inhibit CD47 and induce senescence may be a promising strategy for liver cancer. The efficacy of intravenously administered CDC7 and CD47 inhibitors is limited by low uptake and short circulation times. Here, inhibitors are coloaded into a dual-targeted nanosystem. The sequential release of the inhibitors from the nanosystem under acidic conditions first induces cellular senescence and then promotes immune responses. In an in situ liver cancer mouse model and a chemotherapy-resistant mouse model, the nanosystem effectively inhibited tumor growth by 90.33% and 85.15%, respectively. Overall, the nanosystem in this work achieved the sequential release of CDC7 and CD47 inhibitors in situ to trigger senescence and induce immunotherapy, effectively combating liver cancer and overcoming chemoresistance.

Asunto(s)

Antígeno CD47 , Neoplasias Hepáticas , Animales , Ratones , Neoplasias Hepáticas/tratamiento farmacológico , Neoplasias Hepáticas/metabolismo , Antígeno CD47/metabolismo , Humanos , Modelos Animales de Enfermedad , Senescencia Celular/efectos de los fármacos , Proteínas de Ciclo Celular/metabolismo , Inmunoterapia/métodos , Sistemas de Liberación de Medicamentos/métodos , Nanopartículas , Factores Inmunológicos/farmacología , Línea Celular Tumoral , Agentes Inmunomoduladores/farmacología

RESUMEN

Heterotypic ubiquitin (Ub) chains have emerged as fundamental components in a wide range of cellular processes. The integrative identification of Ub-interacting proteins (readers) and Ub-modifying enzymes (writers and erasers) that selectively recognize and regulate heterotypic ubiquitination may provide crucial insights into these processes. In this study, we employed the bifunctional molecule-assisted (CAET) strategy to develop a type of disulfide bond-activated heterotypic Ub reagents, which allowed to enrich heterotypic Ub-interacting proteins and modifying enzymes simultaneously. The sequential release of readers which are non-covalently bound and writers or erasers which are covalently conjugated by using urea and reductant, respectively, combined with label-free quantitative (LFQ) MS indicated that these heterotypic Ub reagents would facilitate future investigations into functional roles played by heterotypic Ub chains.

Asunto(s)

Proteínas , Ubiquitina , Ubiquitina/metabolismo , Indicadores y Reactivos , Ubiquitinación , Proteínas/metabolismo , Ubiquitina-Proteína Ligasas/metabolismo

RESUMEN

Rheumatoid arthritis (RA) progression involves multiple cell types, and sequential drug action on target cells is necessary for RA treatment. Nanocarriers are widely used for RA treatment; however, the targeted delivery and on-demand release of multiple drugs remains challenging. Therefore, in this study, a dual-sensitive polymer is developed using chondroitin sulfate (CS) for the co-delivery of the cartilage repair agent, glucosamine (GlcN), and anti-inflammatory drug, tofacitinib (Tof). In the joint cavity, acidic pH facilitates the cleavage of GlcN from CS polymer to repair the cartilage damage. Subsequently, macrophage uptake via CS-CD44 binding and intracellular reactive oxygen species (ROS) mediate conversion of (methylsulfanyl)propylamine to a hydrophilic segment jointly triggered rapid Tof/GlcN release via micelle disassembly. The combined effects of Tof, GlcN, and ROS depletion promote the M1-to-M2 polarization shift to attenuate inflammation. The synergistic effects of these agents against RA are confirmed in vitro and in vivo. Overall, the dual pH/ROS-sensitive CS nanoplatform simultaneously delivers GlcN and Tof, providing a multifunctional approach for RA treatment with synergistic drug effects.

Asunto(s)

Artritis Reumatoide , Glucosamina , Piperidinas , Pirimidinas , Especies Reactivas de Oxígeno , Especies Reactivas de Oxígeno/metabolismo , Artritis Reumatoide/tratamiento farmacológico , Artritis Reumatoide/metabolismo , Piperidinas/química , Piperidinas/farmacología , Concentración de Iones de Hidrógeno , Glucosamina/química , Animales , Pirimidinas/química , Pirimidinas/farmacología , Ratones , Portadores de Fármacos/química , Sistemas de Liberación de Medicamentos/métodos , Sinergismo Farmacológico , Nanopartículas/química , Células RAW 264.7 , Humanos

RESUMEN

Chronic pain emerges as a major global health issue, significantly impacting individuals' health and quality of life. In this study, we designed a bilayer microneedle loaded with lidocaine nanocomposites in the inner layer and adrenaline (Adr) in the outer layer (HCP MNs) for modulated sequential release to achieve prolonged local anesthesia. The obtained HCP MNs featured an intact structure with adequate mechanical strength for efficient skin penetration. The bilayer structure of MNs was evidenced by loading two fluorescent dyes in each layer. Furthermore, these HCP MNs were capable of inducing rapid as well as prolonged local anesthetic effects in guinea pigs. Hence, the bilayer MN coloaded with Adr and lidocaine nanocomposite serves as a promising transdermal delivery platform for chronic pain management.

Asunto(s)

Anestesia Local , Lidocaína , Humanos , Animales , Cobayas , Lidocaína/química , Epinefrina , Calidad de Vida , Sistemas de Liberación de Medicamentos

RESUMEN

Multilayer structural nanoparticles (MSNPs) fabricated by layer-by-layer self-assembly were used for the co-encapsulation of resveratrol (Res) and vitamin D3 (Vd). Res and Vd co-encapsulated MSNPs (Res-Vd-MSNPs) were evaluated by appearance, morphology, particle size, ζ potential and encapsulation efficiency (EE). The results showed that Res-Vd-MSNPs were spherical in shape with a particle size of 625.4 nm and a surface charge of +26.1 mV. The EE of Res and Vd was as high as 93.6 % and 90.8 %, respectively. Res-Vd-MSNPs exhibited better stability and lower degradation rate in simulated gastric fluid, allowing the programmed sequential release of Vd and Res in simulated intestinal fluid and simulated colonic fluid, which was also confirmed by in vivo fluorescence imaging of mice. In addition, Res-Vd-MSNPs effectively alleviated the clinical symptoms of dextran sulfate sodium salt (DSS)-induced colitis in mice, including weight loss, diarrhea and fecal bleeding, and it especially exerted a preventive effect on DSS-induced colon tissue damage and colon shortening. Furthermore, Res-Vd-MSNPs suppressed the expression of anti-inflammatory cytokines such as TNF-α, IL-1ß and IL-6 and ameliorated DSS-induced oxidative damage, decreased colonic myeloperoxidase (MPO) and nitric oxide (NO) activities and elevated glutathione (GSH) level in DSS-treated mice. This study illustrated that MSNPs were potential carriers for developing the co-delivery system for the synergistic prevention and treatment of ulcerative colitis.

Asunto(s)

Colitis Ulcerosa , Colitis , Nanopartículas , Animales , Ratones , Resveratrol/metabolismo , Dextranos/farmacología , Colitis/inducido químicamente , Colitis/tratamiento farmacológico , Colitis/metabolismo , Colitis Ulcerosa/tratamiento farmacológico , Glutatión/metabolismo , Sulfato de Dextran/efectos adversos , Colon , Ratones Endogámicos C57BL , Modelos Animales de Enfermedad

RESUMEN

An effective treatment for some disease, such as the model disease acute retinal necrosis (ARN), requires a combination of different drugs which should be administered at a certain interval. The precise sequential and long-term drug release are the critical questions. In this work, the as-prepared chitosan nanoparticles (CS-NPs) coated with hyaluronic acid (HA) were embedded in the aldehyde ß-cyclodextrin (ACD)/aminated hyaluronic acid (NHA) hydrogels to synthesize injectable hydrogels loaded with dual drugs named DEX-CS-NPs/GCV-Gel and HA-DEX-CS-NPs/GCV-Gel. In the first 24 h and 48 h, the releases of DEX from DEX-CS-NPs/GCV-Gel were 128.5 % and 82.8 % faster than those from HA-DEX-CS-NPs/GCV-Gel, respectively. There was no DEX released from HA-DEX-CS-NPs/GCV-Gel at the first 7 h, which has never been reported before, although some hydrogel systems loaded with different drugs release different drugs simultaneously at different rate which have been well studied. This is a good start of a precise sequence release. The composite hydrogels possessed appropriate rheology, gel time, degradation performance, and ideal cytocompatibility. The injectable hydrogel loaded with dual drugs presenting a precise sequential and long-term release has great potential in the treatment of diseases requiring combinations of drugs being released sequentially at different treating stages.

Asunto(s)

Quitosano , Nanopartículas , Hidrogeles , Ácido Hialurónico , Liberación de Fármacos

RESUMEN

Bacterial prostatitis is a challenging condition to treat with traditional dosage forms. Physicians often prescribe a variety of dosage forms with different administration methods, which fail to provide an efficient and convenient mode of drug delivery. The aim of this work was to develop a new type of hybrid material incorporating both electrosprayed core-shell microparticles and electrospun nanofibers. A traditional Chinese medicine (Ningmitai, NMT) and a Western medicine (ciprofloxacin, CIP) were co-encapsulated within this material and were designed to be released in a separately controlled manner. Utilizing polyvinylpyrrolidone (PVP) as a hydrophilic filament-forming polymer and pH-sensitive Eudragit® S100 (ES100) as the particulate polymeric matrix, a combined electrohydrodynamic atomization (EHDA) method comprising coaxial electrospraying and blending electrospinning, was used to create the hybrids in a single-step and straightforward manner. A series of characterization methods were conducted to analyze both the working process and its final products. Scanning electron microscopy and transmission electron microscopy revealed that the EHDA hybrids comprised of both CIP-PVP nanofibers and NMT-ES100 core-shell microparticles. Multiple methods confirmed the rapid release of CIP and the sustained release of NMT. The antibacterial experiments indicated that the hybrids exhibited a more potent antibacterial effect against Escherichia coli dh5α and Bacillus subtilis Wb800 than either the separate nanofibers or microparticles. The amalgamation of fibrous nanomedicine and particulate micromedicine can expand the horizon of new types of medicines. The integration of electrospinning and coaxial electrospraying provides a straightforward approach to fabrication. By combining hydrophilic soluble polymers and pH-sensitive polymers in the hybrids, we can ensure the separate sequential controlled release of CIP and NMT for a potential synergistic and convenient therapy for bacterial prostatitis.

RESUMEN

Surgical resection of osteosarcoma is always accompanied by residual metastasis of tumor cells and bone tissue defects. In this work, a novel kind of gelatin/polylactic acid (PLA) coaxial fiber membrane with a shell layer containing doxorubicin-loaded hydroxyapatite (DOX@nHAp) nanoparticles and a core layer containing Icariin (ICA) was developed for antitumor and bone enhancement at the defect site. Physical evaluation displayed that the composite membrane provided moderate hydrophilicity, enhanced tensile strength (Dry: 2-3 MPa, wet: 1-2 MPa) and elasticity (70-100 %), as well as increased specific surface area and pore volume (19.39 m2/g and 0.16 cm3/g). In SBF, DOX@nHAp in the fibers promoted biomineralization on the fiber surface. In in vitro evaluation, approximately 80 % of DOX had a short-term release during the first 8 days, followed by long-term release behavior of ICA for up to 40 days. CCK-8 results confirmed that the membrane could actively support MC3T3-E1 cells proliferation and was conductive to high alkaline phosphatase expression, while the viability of MG-63 cells was effectively inhibited to 50 %. Thus, the dual-loaded fibrous membrane with a coaxial structure and nHAp is a promising system for anticancer and defects reconstruction after osteosarcoma surgery.

Asunto(s)

Gelatina , Osteosarcoma , Humanos , Gelatina/química , Durapatita , Andamios del Tejido/química , Poliésteres/química , Huesos , Doxorrubicina/farmacología , Osteosarcoma/tratamiento farmacológico

RESUMEN

The development of transmucosal drug delivery systems is a practical requirement in oral clinical practice, and controlled sequential delivery of multiple drugs is usually required. On the basis of the previous successful construction of monolayer microneedles (MNs) for transmucosal drug delivery, we designed transmucosal double-layer sequential dissolving MNs using hyaluronic acid methacryloyl (HAMA), hyaluronic acid (HA), and polyvinyl pyrrolidone (PVP). MNs have the advantages of small size, easy operation, good strength, rapid dissolution, and one-time delivery of two drugs. Morphological test results showed that the HAMA-HA-PVP MNs were small and intact in structure. The mechanical strength and mucosal insertion test results indicated the HAMA-HA-PVP MNs had appropriate strength and could penetrate the mucosal cuticle quickly to achieve transmucosal drug delivery. The in vitro and in vivo experiment results of the double-layer fluorescent dyes simulating drug release revealed that MNs had good solubility and achieved stratified release of the model drugs. The results of the in vivo and in vitro biosafety tests also indicated that the HAMA-HA-PVP MNs were biosafe materials. The therapeutic effect of drug-loaded HAMA-HA-PVP MNs in the rat oral mucosal ulcer model demonstrated that these novel HAMA-HA-PVP MNs quickly penetrated the mucosa, dissolved and effectively released the drug, and achieved sequential drug delivery. Compared to monolayer MNs, these HAMA-HA-PVP MNs can be used as double-layer drug reservoirs for controlled release, effectively releasing the drug in the MN stratification by dissolution in the presence of moisture. The need for secondary or multiple injections can be avoided, thus improving patient compliance. This drug delivery system can serve as an efficient, multipermeable, mucosal, and needle-free alternative for biomedical applications.

RESUMEN

Combination immunotherapy synergizing the PD-1 blockade with OX40 agonism has become a research hotspot, due to its enormous potential to overcome the restricted clinical objective response suffered by monotherapy. Questions of timing and sequence have been important aspects of immunotherapies when considering immunologic mechanisms; however, most of the time the straightforward additive approach was taken. Herein, our work is the first to investigate an alternative timing of aOX40 and aPD-1 treatment in melanoma-bearing mice, and it demonstrates that sequential administration (aOX40 first, then aPD-1 following) provided superior antitumor benefits than concurrent treatment. Based on that, to further avoid the limits suffered by solution forms, we adopted pharmaceutical technologies to construct an in situ-formed physical- and chemical-dually ROS-responsive nano-in-gel platform to implement sequential and prolonged release of aPD-1 and aOX40. Equipped with these advantages, the as-prepared (aPD-1NCs&aOX40)@Gels elicited augmented combination immunity and achieved great eradication of both primary and distant melanoma tumors in vivo.

Asunto(s)

Inhibidores de Puntos de Control Inmunológico , Melanoma , Nanoestructuras , Animales , Ratones , Geles/química , Inhibidores de Puntos de Control Inmunológico/farmacología , Inhibidores de Puntos de Control Inmunológico/uso terapéutico , Inmunoterapia/métodos , Melanoma/tratamiento farmacológico , Especies Reactivas de Oxígeno , Nanoestructuras/química , Nanoestructuras/uso terapéutico , Receptores OX40/antagonistas & inhibidores , Receptores OX40/inmunología

RESUMEN

Treatment for chronic diabetic wounds remains a clinical challenge. Wound healing process occurs in three phases: inflammation, proliferation and remodeling. Several factors including bacterial infection, decreased local angiogenesis and diminished blood supply delay wound healing. There is an urgent need to develop wound dressings with multiple biological effects for different stages of diabetic wound healing. Here, we develop a multifunctional hydrogel with two-stage sequential release upon near-infrared (NIR) stimulation, antibacterial activity and pro-angiogenic efficacy. This hydrogel consists of covalently crosslinked bilayer structure, with the lower thermoresponsive poly(N-isopropylacrylamide)/gelatin methacrylate (NG) layer and the upper highly stretchable alginate/polyacrylamide (AP) layer embedding different peptide-functionalized gold nanorods (AuNRs) in each layer. Antimicrobial peptide-functionalized AuNRs released from NG layer exert antibacterial effects. After NIR irradiation, the photothermal transition efficacy of AuNRs synergistically enhances bactericidal efficacy. The contraction of thermoresponsive layer also promotes the release of embedded cargos during early stage. The pro-angiogenic peptide-functionalized AuNRs released from AP layer promote angiogenesis and collagen deposition by accelerating fibroblast and endothelial cell proliferation, migration and tube formation during the subsequent healing phases. Therefore, the multifunctional hydrogel with effective antibacterial activity, pro-angiogenic efficacy and sequential release behaviors is a potential biomaterial for diabetic chronic wound healing.

Asunto(s)

Diabetes Mellitus , Nanotubos , Humanos , Hidrogeles/química , Oro/química , Cicatrización de Heridas , Antibacterianos/química , Péptidos , Nanotubos/química

RESUMEN

Mechanical stress is recognized as a principle for opening enclosed compartments through compression, stretching, or shear, eventually resulting in the onset of a diffusion-controlled release. Here, we hypothesized that the geometrical design of cavities (cut-outs) introduced as containers in elastic polymer substrates and sealed with a brittle coating layer would enable a pre-defined release of different compounds by stress concentration phenomena. Design criteria such as cut-out shapes, orientations, and depths were initially assessed for suitably different stress concentrations in computational models. In substrates fabricated from polydimethylsiloxane by photolithographic techniques, the local strains at horizontal rectangular, circular, and vertical rhombus-shaped cut-outs systematically increased under horizontal stretching as proposed. When filled with model compounds and coated with poly(n-butyl cyanoacrylate), a pre-defined induced breakage of the coating and compound release was confirmed upon continuous uniaxial stretching. This proof of concept demonstrates how device design and functions interlink and may motivate further exploration in technology and medicine for deformation-induced on-demand dosage applications.