RESUMEN

Two new isostructural semiconducting metal-phosphonate frameworks are reported. Co2 [1,4-NDPA] and Zn2 [1,4-NDPA] (1,4-NDPA4- is 1,4-naphthalenediphosphonate) have optical bandgaps of 1.7 eV and 2.5 eV, respectively. The electrocatalyst derived from Co2 [1,4-NPDA] as a precatalyst generated a low overpotential of 374 mV in the oxygen evolution reaction (OER) with a Tafel slope of 43 mV dec-1 at a current density of 10 mA cm-2 in alkaline electrolyte (1 mol L-1 KOH), which is indicative of remarkably superior reaction kinetics. Benchmarking of the OER of Co2 [1,4-NPDA] material as a precatalyst coupled with nickel foam (NF) showed exceptional long-term stability at a current density of 50 mA cm-2 for water splitting compared to the state-of-the-art Pt/C/RuO2 @NF after 30 h in 1 mol L-1 KOH. In order to further understand the OER mechanism, the transformation of Co2 [1,4-NPDA] into its electrocatalytically active species was investigated.

RESUMEN

In this comprehensive review article, we delve into the critical intersection of environmental science and materials science. The introduction sets the stage by emphasizing the global water shortage crisis and the dire consequences of untreated effluents on ecosystems and human health. As we progress into the second section, we embark on an intricate exploration of piezoelectric and photocatalytic principles, illuminating their significance in wastewater treatment and sustainable energy production. The heart of our review is dedicated to a detailed analysis of the detrimental impacts of effluents on human health, underscoring the urgency of effective treatment methods. We dissected three key materials in the realm of piezo-photocatalysis: ZnO-based materials, BaTiO3-based materials, and bismuth-doped materials. Each material is scrutinized for its unique properties and applications in the removal of pollutants from wastewater, offering a comprehensive understanding of their potential to address this critical issue. Furthermore, our exploration extends to the realm of hydrogen production, where we discuss various types of hydrogen and the role of piezo-photocatalysis in generating clean and sustainable hydrogen. By illuminating the synergistic potential of these advanced materials and technologies, we pave the way for innovative solutions to the pressing challenges of water pollution and renewable energy production. This review article not only serves as a valuable resource for researchers and scholars in the fields of material science and environmental engineering but also underscores the pivotal role of interdisciplinary approaches in addressing complex global issues.

Asunto(s)

RESUMEN

The prediction of band edge potentials in photocatalytic materials is an important but challenging task. In contrast, bandgaps can be easily determined through absorption spectra. Here, we present two simple theoretical approaches for the determination of band edge potentials which are based on the electron negativity and work function of each constituent atom. We use these approaches to determine band edge potentials in semiconducting metallic oxides and sulfides, such as titanium dioxide (TiO2), chalcopyrite (CuFeS2), pyrite (FeS2), covellite (CuS), and chalcocite (Cu2S) with respect to an absolute scale (eV) and an electrochemical scale (V). Until now, there is little information on iron and copper sulfides referring to these thermodynamic parameters. TiO2 (Titania p25) was used as reference semiconductor to validate the calculation procedures using experimental values by X-ray diffraction analysis (XRD), diffuse reflectance spectrometry (DRS), and electron paramagnetic resonance spectroscopy (EPR). The production of key chemical species such as reactive oxygen species (ROS) and reactive sulfur species (RSS) has been theoretically and experimentally determined by EPR.

RESUMEN

Diphenylanthracene (DPA) and its derivatives are promising semiconducting materials for p-type organic-field-effect transistors (OFETs). In this study, to develop n-type semiconducting materials with an anthracene core, pentafluorobenzene was introduced into anthracene by C-H direct arylation, enabling the synthesis of various bis(pentafluorophenyl)anthracene (DPA-F) derivatives. The high reactivity of the pentafluorobenzene C-H bond allows direct arylation for synthesizing DPA-F derivatives in a single step. The introduction of strong electron-withdrawing pentafluorophenyl groups provides the anthracene derivatives with n-type semiconducting properties, in contrast to the p-type properties of the parent DPAs. Among the synthesized compounds, 2,6-bis(pentafluorophenyl)anthracene shows a high electron mobility of 0.12±0.02 cm2 /Vs and an on/off ratio>106 in OFETs. The high crystallinity results in the smooth electron transport. This study provides a facile synthetic method for n-type semiconducting materials and insights into the molecular design of the positional effects of aromatic substituents on anthracene.

RESUMEN

The photoinduced microwave complex permittivity of a highly resistive single-crystal silicon wafer was extracted from a bistatic free-space characterization test bench operating in the 26.5-40 GHz frequency band under CW optical illumination at wavelengths of 806 and 971 nm. Significant variations in the real and imaginary parts of the substrate's permittivity induced by direct photoconductivity are reported, with an optical power density dependence, in agreement with the theoretical predictions. These experimental results open the route to ultrafast system reconfiguration of microwave devices in integrated technology by an external EMI-protected and contactless control with unprecedented performance.

RESUMEN

Semiconducting materials are increasingly proposed as alternatives to noble metal nanomaterials to enhance Raman scattering. We demonstrate that bioinspired semiconducting diphenylalanine peptide nanotubes annealed through a reported structural transition can support Raman detection of 10-7 M concentrations for a range of molecules including mononucleotides. The enhancement is attributed to the introduction of electronic states below the conduction band that facilitate charge transfer to the analyte molecule. These results show that organic semiconductor-based materials can serve as platforms for enhanced Raman scattering for chemical sensing. As the sensor is metal-free, the enhancement is achieved without the introduction of electromagnetic surface-enhanced Raman spectroscopy.

RESUMEN

When designing organic semiconductors, side-chain engineering is as important as modifying the conjugated backbone, which has a significant impact on molecular ordering, morphology, and thus electronic device performance. We have developed three dicyanovinyl-end-capped donor-acceptor diketopyrrolopyrrole-based n-type small molecules (C2C9CN, SiC4CN, and EH4PCN) bearing an identical length of alkyl spacer yet different end-functionalized side chains (i.e., alkyl-, siloxane-, and phosphonate-end pendants). The effects of the end-functionalized side chains on the intrinsic molecular properties, microstructure, and charge transport of the small-molecule series were investigated. In comparison with the alkyl-end side chains, incorporating siloxane-end side chains into the backbone facilitates 2D edge-on oriented high intergrain connectivity/crystallinity and compatibility with the substrate surface, whereas the phosphonate-end analogues have an adverse effect on the film-forming quality due to high polarity. Thereby, an organic field-effect transistor fabricated by SiC4CN shows the best electron mobility up to 1.59 × 10-1 cm2 V-1 s-1 along with a high current on/off ratio >105. This study contributes to our understanding of the role of the end-functionalized side chains (e.g., the effects of polarity and bulkiness of the end groups) for the development of high-performance semiconductors.

RESUMEN

Metal-halide semiconductors have shown excellent performance in optoelectronic applications such as solar cells, light-emitting diodes, and detectors. In this review the role of charge-lattice interactions and polaron formation in a wide range of these promising materials, including perovskites, double perovskites, Ruddlesden-Popper layered perovskites, nanocrystals, vacancy-ordered, and other novel structures, is summarized. The formation of Fröhlich-type "large" polarons in archetypal bulk metal-halide ABX3 perovskites and its dependence on A-cation, B-metal, and X-halide composition, which is now relatively well understood, are discussed. It is found that, for nanostructured and novel metal-halide materials, a larger variation in the strengths of polaronic effects is reported across the literature, potentially deriving from variations in potential barriers and the presence of interfaces at which lattice relaxation may be enhanced. Such findings are further discussed in the context of different experimental approaches used to explore polaronic effects, cautioning that firm conclusions are often hampered by the presence of alternate processes and interactions giving rise to similar experimental signatures. Overall, a complete understanding of polaronic effects will prove essential given their direct influence on optoelectronic properties such as charge-carrier mobilities and emission spectra, which are critical to the performance of energy and optoelectronic applications.

RESUMEN

Multiple studies have explored using cage silsesquioxanes (SQs) as backbone elements in hybrid polymers motivated by their well-defined structures and physical and mechanical properties. As part of this general exploration, we report unexpected photophysical properties of copolymers derived from divinyl double decker (DD) SQs, [vinyl(Me)Si(O0.5 )2 ][PhSiO1.5 ]8 [(O0.5 )2 Si(Me)vinyl] (vinylDDvinyl). These copolymers exhibit strong emission red-shifts relative to model compounds, implying unconventional conjugation, despite vinyl(Me)Si(O-)2 siloxane bridges. In an effort to identify minimum SQ structures that do/do not offer extended conjugation, we explored Heck catalyzed co-polymerization of vinyl-ladder(LL)-vinyl compounds, vinyl(Me/Ph)Si(O0.5 )2 [PhSiO1.5 ]4 (O0.5 )2 Si(Me/Ph)vinyl, with Br-Ar-Br. Most surprising, the resulting oligomers show 30-60 nm emission red-shifts beyond those seen with vinylDDvinyl analogs despite lacking a true cage. Further evidence for unconventional conjugation includes apparent integer charge transfer (ICT) between LL-co-thiophene, bithiophene, and thienothiophene with 10 mol % F4 TCNQ, suggesting potential as p-type doped organic/inorganic semiconductors.

RESUMEN

Conjugated polymers have immense potential for their use as semiconducting materials in organic optoelectronic devices. The improvement of synthetic methods for conjugated polymers is important for the practical application of conjugated polymers. For mass production, synthetic methods must be developed by considering the concerns regarding cost and environment. Reduction in the number of synthetic steps is an efficient approach to address these concerns. The utilization of direct CH functionalization is a reasonable strategy in monomer and polymer syntheses, because the prefunctionalization steps for CC bond formation can be eliminated. This review summarizes the recent developments in the efficient syntheses of conjugated polymers as well as their monomers via direct arylation (CH/CX coupling) and cross-dehydrogenative coupling (CH/CH coupling) reactions.

Asunto(s)

RESUMEN

Organic semiconductors (OSCs) offer a new avenue to the next-generation electronics, but the lack of a scalable and inexpensive nanoscale patterning/deposition technique still limits their use in electronic applications. Recently, a new lithographic etching technique has been introduced that uses molecular dopants to reduce semiconducting polymer solubility in solvents and a direct-write laser to remove dopants locally, enabling rapid OSC etching with diffraction limited resolution. Previous publications postulated that the reaction that enables patterning is a photochemical reaction between photoexcited dopants with neutral solvent molecules. In this work, we analyze the photoinduced dissolution kinetics of F4TCNQ doped P3HT films using time-resolved in situ optical probing. We find two competing mechanisms that control de-doping and dissolution: the first is the photochemical reaction posited in the literature, and the second involves direct heating of the polymer by the laser, inducing increased solubility for both the polymer and dopant. We show that the wavelength-specific photochemical effect is dominant in low photon doses while the photothermal effect is dominant with high excitation rates regardless of laser wavelength. With sufficiently high optical intensity input, the photothermal mechanism can in principle achieve a high writing speed up to 1 m/s. Our findings bring new insights into the mechanisms behind laser direct writing of OSCs based on dopant induced solubility control and enable ultraprecise fabrications of various device configurations in large-scale manufacturing.

RESUMEN

Fingerprints of π-conjugated compounds are ubiquitous in nature and play a crucial part in human existence. For instance, cis-retinal, an endogenous π-conjugated molecule present in the eye, performs a vital role in the function of visual perception. π-Conjugated molecules have also received a great deal of attention owing to their intriguing optical properties and created a surge in optoelectronics. Varieties of π-conjugated molecules/oligomers have been developed and explored for a number of applications such as organic light-emitting diodes (OLEDs), organic field-effect transistors (OFETs), organic photovoltaics (OPVs), and sensors, among others. While the extended π-delocalization in one-dimensional (1D) polymers versus oligomers produce superior optical and electronic properties, further extension of π-delocalization to the second dimension (2D) is expected to give rise even more intriguing properties as revealed by theoretical studies. As a matter of fact, graphene is the best example of 2D-conjugated polymers, but its zero-band-gap behavior is a major impediment for semiconducting applications. In contrast, it was challenging to prepare 2D crystalline polymers until the discovery of boroxine/boronate ester linked covalent organic frameworks (COFs) by Yaghi and co-workers. COFs are a new class of porous crystalline polymers in which organic building blocks are held together by covalent bonds. These polymers exhibit potential applications in gas storage, energy storage, photocatalyst, heterogeneous catalysis, sensors, etc. However, the first π-conjugated COF was realized in 2009 via the introduction of imine linker (-C═N-) between the building blocks. Since then, wide varieties of COFs with various π-delocalization promoting spacers have been developed and explored their electronic and optical properties and pertinent applications. In this review, we will highlight the importance of 2D π-conjugated COFs and their achievements in developing novel functionalities.

RESUMEN

In recent years, semiconducting polymer nanoparticles (SPNs) have been attracting considerable attention because of their outstanding characteristics such as higher light and thermal stability. They are widely used in fields of biomedicine such as photoacoustic (PA) imaging (PAI), photodynamic therapy (PDT), and photothermal therapy (PTT). PAI, a new imaging modality based on PA effects, shows great promise in biomedical applications. SPNs that display strong optical absorbance in the visible and near-infrared (NIR) regions can be promising candidates for in vivo PTT and PAI. Here we introduce the preparation of organic conjugated polymer fluorescent nanoparticles in the aqueous phase. We then discuss the application of water-dispersible conjugated polymer nanoparticles in PA and PTT. Finally, we discuss the opportunities and challenges for the development of organic conjugated polymer nanoparticles.

Asunto(s)

RESUMEN

The addition of chemical additives is considered as a promising approach for obtaining high-quality perovskite films under mild conditions, which is essential for both the efficiency and the stability of organic-inorganic hybrid perovskite solar cells (PeSCs). Although such additive engineering yields high-quality films, the inherent insulating property of the chemical additives prevents the efficient transport and extraction of charge carriers, thereby limiting the applicability of this approach. Here, it is shown that organic conjugated molecules having rhodanine moieties (i.e., SA-1 and SA-2) can be used as semiconducting chemical additives that simultaneously yield large-sized perovskite grains and improve the charge extraction. Using this strategy, a high power conversion efficiency of 20.3% as well as significantly improved long-term stability under humid air conditions is achieved. It is believed that this approach can provide a new pathway to designing chemical additives for further improving the efficiency and stability of PeSCs.

RESUMEN

Exploring the various applications of conjugated polymers requires systematic studies of their physical properties as a function of the doping density, which, consequently, calls for precise control of their doping density. In this study, we report a novel solid-state photoinduced charge-transfer reaction that dedopes highly conductive polyelectrolyte complexes such as poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate). Varying the UV-irradiation time of this material allows the carrier density inside the film to be precisely controlled over more than 3 orders of magnitude. We extract the carrier density, carrier mobility, and Seebeck coefficient at different doping levels to obtain a clear image of carrier-transport mechanisms. This approach not only leads to a better understanding of the physical properties of the conducting polymer but also is useful for developing applications requiring patterned, large-area conducting polymers.

RESUMEN

Single-walled carbon nanotube (SWNT)-based nanohybrid compositions based on (6,5) chirality-enriched SWNTs ([(6,5) SWNTs]) and a chiral n-type polymer (S-PBN(b)-Ph4 PDI) that exploits a perylenediimide (PDI)-containing repeat unit are reported; S-PBN(b)-Ph4 PDI-[(6,5) SWNT] superstructures feature a PDI electron acceptor unit positioned at 3 nm intervals along the nanotube surface, thus controlling rigorously SWNT-electron acceptor stoichiometry and organization. Potentiometric studies and redox-titration experiments determine driving forces for photoinduced charge separation (CS) and thermal charge recombination (CR) reactions, as well as spectroscopic signatures of SWNT hole polaron and PDI radical anion (PDI(-.) ) states. Time-resolved pump-probe spectroscopic studies demonstrate that S-PBN(b)-Ph4 PDI-[(6,5) SWNT] electronic excitation generates PDI(-.) via a photoinduced CS reaction (τCS ≈0.4 ps, ΦCS ≈0.97). These experiments highlight the concomitant rise and decay of transient absorption spectroscopic signatures characteristic of the SWNT hole polaron and PDI(-.) states. Multiwavelength global analysis of these data provide two charge-recombination time constants (τCR ≈31.8 and 250 ps) that likely reflect CR dynamics involving both an intimately associated SWNT hole polaron and PDI(-.) charge-separated state, and a related charge-separated state involving PDI(-.) and a hole polaron site produced via hole migration along the SWNT backbone that occurs over this timescale.

RESUMEN

A visible-light-responsive bismuth-based metal-organic framework (Bi-mna) is demonstrated to show good photoelectric and photocatalytic properties. Combining experimental and theoretical results, a ligand-to-ligand charge transfer (LLCT) process is found to be responsible for the high performance, which gives rise to a longer lifetime of photogenerated charge carriers. Our results suggest that bismuth-based MOFs could be promising candidates for the development of efficient visible-light photocatalysts.

RESUMEN

A unique heterostructured optoelectronic material (HOM), consisting of a reduced graphene oxide (RGO) layer with spatially distributed CdS, suspended by zinc oxide (ZnO) nanorods, is presented. The key features of this HOM are the assembly of the components in a manner so as to realize an effective integration between the constituents and the ability to modify the electronic properties of the RGO. For the first time, the location of RGO (as a suspended layer) along with the tuning of its charge-transport properties (n-/p-type) and its influence on the photo(electro)chemical processes has been examined systematically by using this ZnO/RGO/CdS HOM as a case study. The n-type RGO interlayer facilitates >100 % increase in the photocurrent density and 25 % increase in the photodegradation of a dye, compared to ZnO/CdS, thus demonstrating its multifunctionality. At 3.2 mA cm(-2) , this HOM architecture helps to achieve the highest photocurrent density utilizing ZnO, RGO, and CdS as building blocks in any form. The work is significant for the following reasons: i) other one dimensional (1D) oxides/chalcogenides or 1D oxides/dyes may be designed with similar architectures; ii) HOMs with tunable optical absorbance and charge-transport properties could be realized; iii) related application areas (e.g., sensing or solar fuel generation) should be greatly benefited.

RESUMEN

The synthesis and self-assembly of novel semiconducting rod-coil type graft block copolymers based on poly(para-phenylene vinylene) (PPV) copolymers is presented, focusing on the ordering effect of linear versus hyperbranched side chains. Using an additional reactive ester block, highly polar, linear poly(ethylene glycol), and hyperbranched polyglycerol side chains are attached in a grafting-to approach. Remarkably, the resulting novel semiconducting graft copolymers with polyether side chains show different solubility and side-chain directed self-assembly behavior in various solvents, e.g., cylindrical or spherical superstructures in the size range of 10 to 120 nm, as shown by TEM. By adjusting the molecular weight and the topology of the polyether segments, self-assembly into defined superstructures can be achieved, which is important for the efficient charge transport in potential electronic applications.

Asunto(s)