RESUMEN

Aim: The aim of this case report is to present three different patients who had horizontal and vertical root fractures of young permanent teeth, its diagnosis, clinical and radiographic findings, treatment, and long-term follow-up and success rate. Background: Root fractures are relatively rare with the prevalence of 0.5-7% in permanent and 2-4% in deciduous dentition. Timely intervention and accurate treatment procedures are the main concerns for long-term success of root fractures. Case description: Case I and case II had horizontal fracture of immature permanent tooth. Patients reported with a chief complaint of pain in their upper central incisors. As a result of radiographic examination, horizontal root fractures were diagnosed. Teeth were treated with a mineral trioxide aggregate (MTA) plug (case I and case II) and repositioning and splinting (case II). Case III had vertical root fracture of immature permanent tooth. Tooth was treated with apexification (sectional obturation) and sealed with resin-modified glass ionomer cement (RMGIC) till the fracture site and flowable light cure restoration. Patients were scheduled for follow-up visits at different time intervals. Radiographic evidence indicated ongoing root development in these immature teeth. Normal color and mobility were observed, and no pain was noted during horizontal and vertical percussion tests. Conclusion: The present case report shows a favorable and stable outcome of timely treatment and sound healing of various types of root fracture. Long-term follow-up of patients with trauma is essential because pathological changes can occur several years following injury. Clinical significance: The latest treatment modalities and long-term follow-up showed clinical success. How to cite this article: Dhindsa A, Garg S, Poddar P, et al. Management of Root Fractures in Young Immature Permanent Teeth: Three Case Reports. Int J Clin Pediatr Dent 2024;17(3):352-356.

RESUMEN

OBJECTIVES: This study aimed to compare the accuracy of cone-beam computed tomography (CBCT) scanning and three different electronic apex locators (EALs) in the detection of simulated oblique root fractures (ORF) in different localizations. METHODS: The study utilized a total of eighty human maxillary incisors, which were categorized into two groups based on the location of the ORF (apical and middle third of the root) formed on the buccal side of the root surface. The measurement of the distance between the incisal edge and the intersection of the ORF with the root canal was conducted using a stereomicroscope. This measurement is referred to as the actual working length (AWL). Additionally, three EALs-Dentaport ZX, EndoRadar Pro, and Propex II-were utilized to determine the electronic working length (EWL). Furthermore, CBCT images were employed to assess the distance, known as the CBCT working length (CWL). The differences were determined by subtracting AWL from EWL and CWL. RESULTS: Based on the accuracy of the devices, there were no significant differences observed among Dentaport ZX, EndoRadar, Propex II, and CBCT measures in both the apical and middle third HRF groups, within the acceptable range of 0.5 mm and 1 mm. CONCLUSION: The accuracy of Dentaport ZX, Propex II, and CBCT was higher in the middle third ORF group compared to the apical third ORF group, with a tolerance of 0.5 mm. However, there were no significant differences seen among the devices.

RESUMEN

AIM: The purpose of the present study was to evaluate permanent teeth with post-traumatic transversal root fractures, for their initial healing modality, the effect of candidate predictors and their long-term prognosis. METHODOLOGY: A retrospective longitudinal clinical study was conducted to evaluate records from patients bearing transversal root fractures in permanent teeth in order to radiographically assess short-term healing and non-healing events in the fracture line, their prognostic factors and their relationship with long term outcomes. The inter-fragmentary tissues were classified as healing: hard tissue (HT), connective tissue (CT) or connective tissue and bone (CT + B) and non-healing: interposition of granulation tissue (GT). A competing risk survival analysis was conducted to estimate the hazards of healing and non-healing events in the short-term and the effect of demographic, clinical, and treatment variables was assessed using the subdistribution regression model (Fine & Gray). RESULTS: Radiographic findings showed 61.4% of healing in the short-term being strongly influenced by the presence and type of concomitant injuries to the coronal fragment. Teeth with concomitant crown fractures (sHR 24.38, 95% CI [3.16-188.3], p = 0.0022), luxations with dislocations (sHR 10.58, 95% CI [1.37-81.9], p = 0.0240) and subluxations (HR 9.66, 95% CI [1.14-81.7], p = 0.0370) were more likely to present non-healing of root fractures in the short-term. The healing rate in the long-term was of 75.9%, most of them with interposition of bone and connective tissue. Kappa statistics demonstrated an overall agreement of 67.1% between short and long-term healing patterns, in special HT and CT + Bone modalities. CONCLUSION: Healing at the fracture site was the most frequent outcome, both in the short-term and in the long-term. Short-term healing modality was strongly influenced by the presence and type of concomitant injuries to the crown fragment, being the worst prognosis observed in root-fractured teeth with concomitant crown fractures, followed by concomitant luxations with dislocation. CLINICAL RELEVANCE: Post-traumatic transversal root fractures have a positive prognosis supporting therefore, a more conservative approach for these teeth before considering more radical treatments.

Asunto(s)

RESUMEN

The 2020 International Association of Dental Traumatology (IADT) Guidelines feature several important changes in the treatment recommendations for traumatic dental injuries (TDIs) from the previous 2012 iteration of these Guidelines. This evidence-based narrative review aims to provide a detailed appraisal of five specific changes incorporated in the 2020 IADT Guidelines, based on the available literature evidence that may have prompted these changes. The paper discusses three excellent additions/changes to the new Guidelines: (i) inclusion of a core outcome set for reporting TDIs; (ii) more conservative management of primary dentition TDIs including the changed recommendations for radiation exposure and managing primary dentition luxation injuries; and (iii) the changes in the treatment recommendations for permanent dentition avulsion injuries. The paper further debates whether two other changes made in the current IADT Guidelines for-(i) intrusion injuries in immature teeth; and (ii) complicated crown-root fractures in mature teeth-have sufficient evidence to support the changed recommendations.

Asunto(s)

RESUMEN

OBJECTIVE: To study the effect of various intracanal materials on the accuracy of oral maxillofacial cone-beam computed tomography (CBCT) for the diagnosis of vertical root fracture (VRF). METHODS: A total of twenty-four structurally intact single root canal dried and isolated teeth extracted for orthodontic treatment or periodontal disease were collected. The teeth were decrowned along the cemento-enamel junction (CEJ) and then used as samples for the study after conventional root canal preparation and post preparation. The 24 samples were divided into two groups with 12 samples in each group. Group A was the control group (no VRF group). According to intracanal materials, they were divided into five subgroups: blank group, fiber post group, gutta-percha point group, titanium post group and gold-palladium post group. Group B was the experimental group (VRF group), and subgroups were grouped as above. The VRF model was prepared by a unified method in the VRF group: the root was completely fractured in the buccolingual direction with a custom root canal nail and then cemented and reset. The control group was not subjected to the simulation of VRF. Titanium post and gold-palladium post were made according to the individuality of the root canal preparation, and the tightness of the post to the root canal wall was confirmed by X-ray radiograph. Then all the samples were scanned by CBCT in the isolate swine mandibular alveolar sockets. The diagnostic accuracy was statistically analyzed via blind interpretation by experienced endodontic specialists and oral and maxillofacial medical imaging specialists. RESULTS: The accuracy of the diagnosis of VRF in the blank group, fiber post group, gutta-percha point group, titanium post group, and gold-palladium post group in CBCT was 95.83%, 91.67%, 87.50%, 79.17%, and 45.83%, respectively. Compared with the blank group, the differences were not statistically significant in the fiber post group (P>0.999), the gutta-percha point group (P=0.500) and the titanium post group (P=0.125). The lowest diagnostic accuracy of VRF was found in the gold-palladium post group, and the difference was statistically significant compared with all other groups (P < 0.001). CONCLUSION: Various intracanal materials have different degrees of influence on the diagnostic accuracy of VRF diagnosis in CBCT. The influence of fiber post, gutta-percha point and titanium post was small, while the influence of gold-palladium post was significant.

Asunto(s)

RESUMEN

OBJECTIVE@#To study the effect of various intracanal materials on the accuracy of oral maxillofacial cone-beam computed tomography (CBCT) for the diagnosis of vertical root fracture (VRF).@*METHODS@#A total of twenty-four structurally intact single root canal dried and isolated teeth extracted for orthodontic treatment or periodontal disease were collected. The teeth were decrowned along the cemento-enamel junction (CEJ) and then used as samples for the study after conventional root canal preparation and post preparation. The 24 samples were divided into two groups with 12 samples in each group. Group A was the control group (no VRF group). According to intracanal materials, they were divided into five subgroups: blank group, fiber post group, gutta-percha point group, titanium post group and gold-palladium post group. Group B was the experimental group (VRF group), and subgroups were grouped as above. The VRF model was prepared by a unified method in the VRF group: the root was completely fractured in the buccolingual direction with a custom root canal nail and then cemented and reset. The control group was not subjected to the simulation of VRF. Titanium post and gold-palladium post were made according to the individuality of the root canal preparation, and the tightness of the post to the root canal wall was confirmed by X-ray radiograph. Then all the samples were scanned by CBCT in the isolate swine mandibular alveolar sockets. The diagnostic accuracy was statistically analyzed via blind interpretation by experienced endodontic specialists and oral and maxillofacial medical imaging specialists.@*RESULTS@#The accuracy of the diagnosis of VRF in the blank group, fiber post group, gutta-percha point group, titanium post group, and gold-palladium post group in CBCT was 95.83%, 91.67%, 87.50%, 79.17%, and 45.83%, respectively. Compared with the blank group, the differences were not statistically significant in the fiber post group (P>0.999), the gutta-percha point group (P=0.500) and the titanium post group (P=0.125). The lowest diagnostic accuracy of VRF was found in the gold-palladium post group, and the difference was statistically significant compared with all other groups (P < 0.001).@*CONCLUSION@#Various intracanal materials have different degrees of influence on the diagnostic accuracy of VRF diagnosis in CBCT. The influence of fiber post, gutta-percha point and titanium post was small, while the influence of gold-palladium post was significant.

Asunto(s)

RESUMEN

OBJECTIVES: Evaluating the diagnostic efficiency of deep learning models to diagnose vertical root fracture in vivo on cone-beam CT (CBCT) images. MATERIALS AND METHODS: The CBCT images of 276 teeth (138 VRF teeth and 138 non-VRF teeth) were enrolled and analyzed retrospectively. The diagnostic results of these teeth were confirmed by two chief radiologists. There were two experimental groups: auto-selection group and manual selection group. A total of 552 regions of interest of teeth were cropped in manual selection group and 1118 regions of interest of teeth were cropped in auto-selection group. Three deep learning networks (ResNet50, VGG19 and DenseNet169) were used for diagnosis (3:1 for training and testing). The diagnostic efficiencies (accuracy, sensitivity, specificity, and area under the curve (AUC)) of three networks were calculated in two experiment groups. Meanwhile, 552 teeth images in manual selection group were diagnosed by a radiologist. The diagnostic efficiencies of the three deep learning network models in two experiment groups and the radiologist were calculated. RESULTS: In manual selection group, ResNet50 presented highest accuracy and sensitivity for diagnosing VRF teeth. The accuracy, sensitivity, specificity and AUC was 97.8%, 97.0%, 98.5%, and 0.99, the radiologist presented accuracy, sensitivity, and specificity as 95.3%, 96.4 and 94.2%. In auto-selection group, ResNet50 presented highest accuracy and sensitivity for diagnosing VRF teeth, the accuracy, sensitivity, specificity and AUC was 91.4%, 92.1%, 90.7% and 0.96. CONCLUSION: In manual selection group, ResNet50 presented higher diagnostic efficiency in diagnosis of in vivo VRF teeth than VGG19, DensenNet169 and radiologist with 2 years of experience. In auto-selection group, Resnet50 also presented higher diagnostic efficiency in diagnosis of in vivo VRF teeth than VGG19 and DensenNet169. This makes it a promising auxiliary diagnostic technique to screen for VRF teeth.

Asunto(s)

RESUMEN

BACKGROUND: Regenerative endodontic procedures (REPs) are an alternative treatment in immature traumatized teeth with necrotic pulp/apical periodontitis. However, this procedure has been infrequently reported in multiple transverse root fractures of mature teeth. This case report describes management of a patient with multiple horizontal root fractures in 2 maxillary central incisors that were successfully treated with REPs. CASE PRESENTATION: A 17-year-old girl had a history of traumatic injury to mature teeth 11 and tooth 21 resulting in multiple transverse root fractures. Clinical examination showed that both teeth responded to electric and thermal pulp sensibility tests with prolonged severe pain and were tender to percussion and palpation. Periapical radiographic examination showed both teeth were fully developed and had multiple transverse fractures in the mid-root. The pulp diagnosis was consistent with symptomatic irreversible pulpitis. REPs were initiated with only the coronal fragments treated to preserve pulp vitality in the apical fragment for potential pulp tissue regeneration. After REPs, clinical signs/symptoms subsided, and the two teeth were followed for 48 months when cone beam computed tomography (CBCT) imaging was also undertaken. At the last review, the case demonstrated root fractures healing with calcified tissue and pulp calcification in the apical fragments. Both teeth were stable and in function. CONCLUSIONS: REPs have the potential to be used to treat traumatized and symptomatic mature permanent teeth that have sustained transverse root fractures.

Asunto(s)

RESUMEN

BACKGROUND/AIM: A crown-root fracture is a fracture of both the crown and the root of a tooth. The International Association of Dental Traumatology (2020) guidelines recommended fragment reattachment and stabilization of loose fragments as an immediate management protocol for uncomplicated crown-root fractures. However, the lack of evidence and unpredictability make it a less popular treatment option. The aim of this study was to compare three protocols of fragment reattachment for the management of teeth with crown-root fractures. METHODOLOGY: Eighty mandibular bovine incisors with similar dimensions and no structural deformities were selected and randomized into four groups: Group I (Control/sound teeth); Group II (no rehydration); Group III (rehydration in distilled water for 15 min) and Group IV (rehydration in a humidification chamber for 15 min). A fracture was simulated to extend from the labial side of the middle-third of the crown to the palatal side of the cervical-third of the root. Fragments were exposed to the environment under normal temperature and pressure. Fragments were later reattached as per the standard protocol following the rehydration as specified for each group. Samples were subjected to thermocycling, and the force required to fracture them was evaluated by using a universal testing machine. RESULTS: The highest mean force required to fracture was seen in Group IV (208.27 ± 75.99 N) followed by Group III (182.01 ± 90.13 N) and Group II (158.85 ± 68.04 N). These differences were statistically significant. Comparison of the mean difference of force required to fracture between pairs of groups revealed statistically significant mean differences only between the controls and each experimental group. CONCLUSION: The force required to fracture the reattached fragments in teeth with crown-root fractures was affected by rehydration of the fragments. The force was higher in fragments reattached after rehydration, and the highest force was required in the teeth that had been rehydrated in a humidification chamber.

Asunto(s)

RESUMEN

OBJECTIVE: The aim of this case series was to test various personalized, CAD/CAM-manufactured orthodontic extrusion appliances. The appliances were characterized by high rigidity and manufacturing precision. In addition, the orthodontic force vector could be precisely and three-dimensionally planned. METHOD AND MATERIALS: After a comprehensive diagnosis of three patients with deep fractured teeth by an interdisciplinary team, each patient's personalized extrusion protocol was determined (slow or rapid extrusion). Based on an intraoral scan, the personalized extrusion appliances were then digitally planned and manufactured using selective laser melting. The force vector was also precisely planned during this process. The appliances were inserted, and the force on the teeth to be extruded was precisely applied in accordance with the extrusion protocol. After extrusion, the teeth were retained and, if necessary, permanently restored. RESULTS: The target teeth of all three patients were successfully extruded. Furthermore, good cleanability and high wearing comfort of the appliances were maintained throughout treatment, as was the precise application of force. CONCLUSION: The effectiveness of the tested digital workflow for precise and simplified orthodontic extrusion was clinically proven. The workflow guaranteed the following throughout treatment: precise planning and application of the force system; improved periodontal hygiene; and improved wearing comfort of the appliance, without affecting the patient's existing occlusion.

Asunto(s)

RESUMEN

Abstract The aim of this study was to compare the influence of endodontic sealers artifacts on the detection of vertical root fracture in cone beam computed tomography (CBCT). Premolars and central incisors were assigned into five different groups: Control, Pulp Canal Sealer, AH Plus, Sealer 26, and BC Sealer (n= 10, per group). VRFs were mechanically induced and the teeth were inserted into an image phantom. Subsequently, CBCT (Cranex 3Dx, Soredex, Tuusula, Finland) images were obtained and two observers were asked separately to identify root fracture, by visual analysis. For both premolar and central incisors, kappa coefficients of intraobserver agreement varied from good to excellent (K: 80% - 87%), and the values for interobserver agreement varied from fair to moderate (K: 30% - 35%). As follows, the area under the curve (AUC) of receiver operating characteristic (ROC) values for VRFs highlighted that the use of BC sealer reduced the observers' ability to discriminate VRFs relative to other sealers. Moreover, sensitivity values for premolars teeth ranged from 20% to 60%, and specificity ranged from 60% to 100%; while sensitivity values for central incisors ranged from 30% to 70%, and specificity ranged from 70% to 100%. In conclusion, the low sensitivity values, mainly for premolars, demonstrated the difficulty in VRF diagnosis. Furthermore, BC Sealer induced significantly more imaging artifacts than other sealers. These results highlighting that endodontic sealers may interfere with the diagnosis of VRFs.

Resumo O objetivo deste estudo foi comparar a influência dos artefatos de cimentos endodônticos na detecção de fratura radicular vertical (FRV) em tomografia computadorizada de feixe cônico (TCFC). Pré-molares e incisivos centrais foram divididos em cinco grupos diferentes: Controle, Pulp Canal Sealer, AH Plus, Sealer 26 e BC Sealer (n = 10, por grupo). As FRVs foram induzidas mecanicamente e os dentes inseridos em uma réplica da mandibula humana. Posteriormente, imagens de TCFC (Cranex 3Dx, Soredex, Tuusula, Finlândia) foram obtidas e dois observadores foram solicitados a identificar fratura radicular separadamente, o critério utilizado foi a análise visual. Tanto para pré-molares quanto para incisivos centrais, os coeficientes kappa de concordância intraobservador variaram de bom a excelente (K: 80% - 87%), e os valores de concordância interobservador variaram de regular a moderado (K: 30% - 35%). A seguir, a área sob a curva (AUC) dos valores da característica de operação do receptor (ROC) para FRVs destacou que o uso do cimento BC Sealer reduziu a capacidade dos observadores de discriminar FRVs em relação a outros cimentos endodônticos. Além disso, os valores de sensibilidade para pré-molares variaram de 20% a 60%, e a especificidade variou de 60% a 100%; enquanto os valores de sensibilidade para incisivos centrais variaram de 30% a 70%, e a especificidade variou de 70% a 100%. Em conclusão, os baixos valores de sensibilidade, principalmente para pré-molares, demonstraram uma dificuldade no diagnóstico de FRV. Além disso, o BC Sealer induziu significativamente mais artefatos de imagem do que outros cimentos. Esses resultados evidenciam que os cimentos endodônticos podem interferir no diagnóstico das FRVs.

RESUMEN

BACKGROUND/AIM: Long-term splinting of teeth with intra-alveolar root fractures has been considered important for the deposition of hard tissue between the root fragments. The aim of this study was to compare the healing outcomes in teeth with intra-alveolar root fractures relative to splinting times in three dental centers in Scandinavia, using historical data. MATERIALS AND METHODS: A total of 512 maxillary and mandibular incisors from three dental trauma centers were included in the study. Two of the centers used long-term splinting protocols of two to three months while the other center used a short-term splinting protocol of one month or less. Three outcomes were evaluated: (1) Healing with hard tissue (dentin and/or cementum). (2) Healing with connective tissue (periodontal ligament) interposition with or without bone between the fragments. (3) Non-healing due to the coronal pulp being necrotic and infected with granulation tissue interposed between the fragments. RESULTS: The mean splinting times were 18, 81, and 110 days in the three centers. Long-term splinting resulted in hard tissue healing more frequently than short-term splinting. Short-term splinting resulted in more connective tissue/bony healing than long-term splinting, while there was no difference in the frequency of non-healing between long-term and short-term splinting protocols. CONCLUSIONS: While the results suggest that long-term splinting favors hard tissue deposition, one cannot, however, conclude that long-term splinting definitely favors hard tissue healing since the treatment protocols were not randomized among the three centers. More clinical studies on the role of splinting time need to be done.

Asunto(s)

RESUMEN

The life and professional contributions to dental traumatology of Dr Jens Ove Andreasen are described in terms of his research, writing, teaching, and leadership.

Asunto(s)

RESUMEN

OBJECTIVES: To present an image processing framework to improve the detection of vertical root fractures (VRFs) in digital periapical radiography. MATERIALS AND METHODS: Thirty endodontically treated human teeth (15 of them fractured with a metal post inserted into them, and 15 for the control) were enclosed in a dry mandible and radiographed individually. The proposed framework was applied to the raw data, as a preprocessing step, and was composed of four stages: geometric adjustment and negative, denoising, adaptive contrast enhancement, and gamma correction. The contrast-to-noise ratio (CNR) and sharpness of the image's VRF region were used for the objective evaluation of the method. In addition, five examiners evaluated the original and enhanced images, using a 5-point scale to assess confidence. RESULTS: The objective results showed that the proposed framework increased the CNR of the VRF region by 173% compared to the standard preprocessing method provided by the detector's manufacturer. The results found by the human observers indicated that the area under the curve (AUC) and sensitivity of the diagnosis of VRF significantly increased by 4% and 17% (p ≤ 0.05), respectively, when the examiners evaluated the image with the proposed method concomitantly with the image available in the commercial software. However, the specificity was reduced. CONCLUSIONS: The proposed image processing framework can be used as an additional tool to that provided by the manufacturer to increase the sensitivity and AUC of the diagnosis of VRF. CLINICAL RELEVANCE: The proposed method can be easily used in clinical practice to aid VRF detection, since it does not incur high computational costs and does not increase the radiation dose applied to the patient.

Asunto(s)

RESUMEN

AIM: This study aimed to investigate the fibroblast cells proliferation in periradicular tissue using mineral trioxide aggregate (MTA) and self-adhesive resin cement as the adhesive material for vertical root fracture fragments following intentional replantation. MATERIALS AND METHODS: This study used 27 male New Zealand rabbits aged 8-12 weeks. The mandibular incisor of each rabbit was extracted, and to simulate vertical fracture, the incisor tooth was sectioned vertically from the cervical to the 2/3 apical. The samples were randomly divided into three groups of nine each. Group 1 (control group), no application of any material. Group 2, the fracture line was sealed using MTA. Group 3, with self-adhesive resin cement. All teeth in all groups were then inserted back (replanted) into the socket of the rabbits. Each group was further divided into three subgroups according to the duration of replantation, namely, group A: week 1, group B: week 2, and group C: week 3. Rabbits were sacrificed according to each duration of replantation for histological preparations. The number of fibroblast cells was evaluated by counting at the three viewpoints under the light-microscope (400× magnification) and Optilab camera; finally, the calculation results were averaged. Data were analyzed using a two-way ANOVA and post hoc LSD test, with a significance level of 95%. RESULTS: Following MTA application in the third week produced the highest number of fibroblast cells (104 + 29.5) compared to other groups. Conversely, the lowest number of fibroblast cells occurred in the control group in the first week of observation (4.33 + 3.5). CONCLUSION: MTA produced the greatest fibroblast cell proliferation than self-adhesive resin cement, particularly in week 3 of vertical root fractures replantation. CLINICAL SIGNIFICANCE: As the adhesive material for vertical root fracture fragments, MTA generated greater fibroblast proliferation than self-adhesive resin cement. Therefore, it is recommended to use MTA to attach vertical root fracture fragments.

Asunto(s)

RESUMEN

This study aimed to find true facture lines in endodontically treated teeth on CBCT images using digital subtraction and to evaluate the influence of width of facture lines in the diagnosis. Thirty-two endodontically treated teeth with vertical root fractures (VRFs) from 30 patients were included in this study. The CBCT images of the patients and the micro-CT images of extracted teeth were imported into our digital subtraction software to distinguish the true facture lines from the streak artefacts. Of them, 23(71.87%) teeth did not present true fracture lines on the CBCT images (CBCT negative), and 9 (28.13%) teeth presented true fracture lines on the CBCT images (CBCT positive). The width of the facture lines was significantly different between these two groups (P < 0.05). To summarise, for in vivo endodontically treated teeth with subtle VRFs, many true fractures lines could not be demonstrated on CBCT images and wider fractures could be better distinguished.

Asunto(s)

RESUMEN

The life and professional contributions to dental traumatology of Dr. Jens Ove Andreasen are described in terms of his research, writing, teaching, and leadership.

Asunto(s)

RESUMEN

BACKGROUND: The diagnosis of nondisplaced longitudinal fractures [vertical root fractures (VRFs)] is challenging in clinical practice. Radiographic techniques showed a difficulty in detection of VRFs. Cone-beam computed tomography (CBCT) is a new diagnostic imaging modality that provides high-quality three-dimensional (3D) images for dental diagnosis. AIMS: The aim of this in vitro study is to compare accuracy of three different imaging modalities: conventional periapical radiographs, digital radiographs, and CBCT in detecting VRFs in teeth that are endodontically as well as nonendodontically treated. MATERIALS AND METHODS: An in vitro model consisting of 60 recently extracted human mandibular lower premolars were used. Root canal treatment was carried out for 30 teeth. Root fractures were created in 30 teeth (15 root canal treated and 15 non-treated) by mechanical force. Other 30 teeth remain intact. The teeth were mounted and images were taken with a periapical, digital, and CBCT X-ray unit. Three endodontists separately evaluated the images. RESULTS: Interobserver κ values showed a very good interobserver agreement (0.98 for CBCT, 0.88 for digital, and 0.93 for conventional periapical X-rays). There was an overall statistically significant difference (p = 0.00) in detecting of root fracture among the three imaging modalities and the highest accuracy with CBCT images. CONCLUSIONS: In in vitro model, CBCT scan appears to give the highest accuracy in detecting VRFs when compared with the periapical systems in both endodontically and nonendodontically treated teeth. CLINICAL SIGNIFICANCE: The CBCT scan shows higher sensitivity in detection of VRFs in comparison with periapical images.

Asunto(s)

RESUMEN

BACKGROUND/PURPOSE: Early diagnosis of vertical root fracture (VRF) has been a great challenge. Since there is no single specific etiology identified, prevention of VRFs in endodontically treated teeth is quite difficult. The study aimed to evaluate the clinical associated factors of VRFs. MATERIALS AND METHODS: A retrospective observational study of medical charts was conducted in the Department of Endodontics of Taipei Medical University Hospital in Taiwan from January 2012 to July 2018. Logistic regression model was performed to determine the association between VRF and its clinical associated factors, inclusive of the tooth characteristics (age, gender and tooth type) and iatrogenic risk factors (history of root canal treatment, restoration and post). RESULTS: A total of 359 teeth were included in the study. The prevalence of VRF on a tooth basis was 18.7%. The result showed that age of more than 50 years (adjusted OR = 3.20, 95% CI: 1.81-5.64, p < 0.001) had significant higher risk of VRFs than those of less than 50 years. The subjects of molars (adjusted OR = 4.31; 95%CI = 2.24-8.27; P value < 0.001) and premolars (adjusted OR = 2.61; 95%CI = 1.16-5.86; P value = 0.021) had significant higher risk of VRFs than those of incisors. However, other variables such as gender, history of root canal treatment, restoration and post had no significant association with the VRF. CONCLUSION: Age and tooth type are significant clinical associated factors of VRF. In the presence of these factors as well as predominant diagnostic factors, clinical practitioners should be aware of the possible diagnosis of VRFs.