RESUMEN

Functionalized isocyanide chemistry represents an important research area in organic synthesis. A structurally unique 2-isocyanophenl propargylic ester has been designed to incorporate the reactivity of isocyanide and propargylic ester. Thus, the reaction of 2-isocyanophenyl propargylic ester and 2-aminoaromatic aldimine facilitates the synthesis of a wide range of polycyclic benzo[b]indolo[3,2-h][1,6]naphthyridine derivatives. Furthermore, reacting with 2-hydroxyaromatic aldimine enables the divergent synthesis of both the aforementioned scaffolds and another structurally distinctive diazabenzo[f]naphtho[2,3,4-ij]azulenes featuring a [7-6-5] core skeleton. Experimental results and DFT calculations suggest that these transformations likely proceed via the in situ generation of a strained cyclopropen-imine species followed by [3+2] cycloaddition. Next, switchable nucleophilic attack/ring-expansion/aromatization and nucleophilic addition/ring-expansion/elimination account for the observed selectivity.

RESUMEN

Riluzole, the first clinically approved treatment for amyotrophic lateral sclerosis (ALS), represents a successful example of a drug endowed with a multimodal mechanism of action. In recent years, different series of riluzole-based compounds have been reported, including several agents acting as Multi-Target-Directed Ligands (MTLDs) endowed with neuroprotective effects. Aiming at identical twin structures inspired by riluzole (2a-c), a synthetic procedure was planned, but the reactivity of the system took a different path, leading to the serendipitous isolation of benzo[b][1,4]thiazepines 3a-c and expanded intermediates N-cyano-benzo[b][1,4]thiazepines 4a-c, which were fully characterized. The newly obtained structures 3a-c, bearing riluzole key elements, were initially tested in an in vitro ischemia/reperfusion injury protocol, simulating the cerebral stroke. Results identified compound 3b as the most effective in reverting the injury caused by an ischemia-like condition, and its activity was comparable, or even higher than that of riluzole, exhibiting a concentration-dependent neuroprotective effect. Moreover, derivative 3b completely reverted the release of Lactate Dehydrogenase (LDH), lowering the values to those of the control slices. Based on its very promising pharmacological properties, compound 3b was then selected to assess its effects on voltage-dependent Na+ and K+ currents. The results indicated that derivative 3b induced a multifaceted inhibitory effect on voltage-gated currents in SH-SY5Y differentiated neurons, suggesting its possible applications in epilepsy and stroke management, other than ALS. Accordingly, brain penetration was also measured for 3b, as it represents an elegant example of a MTDL and opens the way to further ex-vivo and/or in-vivo characterization.

Asunto(s)

RESUMEN

Herein we report the development of an oxidative amination process for the streamlined synthesis of pyridones from cyclopentenones. Cyclopentenone building blocks can undergo in situ silyl enol ether formation, followed by the introduction of a nitrogen atom into the carbon skeleton with successive aromatisation to yield pyridones. The reaction sequence is operationally simple, rapid, and carried out in one pot. The reaction proceeds under mild conditions, exhibits broad functional group tolerance, complete regioselectivity, and is well scalable. The developed method provides facile access to the synthesis of 15N-labelled targets, industrially relevant pyridone products and their derivatives in a fast and efficient way.

RESUMEN

Isatins have been widely used in the preparation of a variety of heterocyclic compounds, where the skeletal editing of isatins has shown significant advantages for the construction of diverse heterocycles. This review highlights the progress made in the last decade (2013-2023) in the skeletal editing of the isatin scaffold. A series of ring expansion reactions for the construction of quinoline skeleton, quinolone skeleton, polycyclic quinazoline skeleton, medium-sized ring skeleton, as well as a series of ring opening reactions for the generation of 2-(azoly)aniline skeleton by the cleavage of C-C bond and C-N bond are highlighted. It is hoped that this review will provide some understanding of the chemical transformations of isatins and contribute to the further realization of its molecular diversity.

RESUMEN

Skeleton editing has rapidly advanced as a synthetic methodology in recent years, significantly streamlining the synthesis process and gaining widespread acceptance in drug synthesis and development. This field encompasses diverse ring reactions, many of which exhibit immense potential in skeleton editing, facilitating the generation of novel ring skeletons. Notably, reactions that involve the cleavage of two distinct rings followed by the reformation of new rings through ring insertion play a pivotal role in the construction of novel ring skeletons. This article aims to compile and systematize this category of reactions, emphasizing the two primary reaction types and offering a thorough exploration of their associated complexities and challenges. Our endeavor is to furnish readers with comprehensive reaction strategies, igniting research interest and injecting fresh impetus into the advancement of this domain.

Asunto(s)

RESUMEN

Cyclohepta[b]indoles, prevalent in natural products and pharmaceuticals, are conventionally accessed via metal or Lewis acid-mediated cycloadditions with prefunctionalized substrates. Our study introduces an innovative sequential catalytic assembly for synthesizing cyclohepta[b]indoles from readily available isatin derivatives. The process involves three catalytic sequences: ring-closing metathesis, catalytic hydrogenation, and acid-catalyzed ring expansion. The RCM of 2,2-dialkene-3-oxindoles, formed by butenyl Grignard addition to 3-allyl-3-hydroxy-2-oxindoles, yields versatile spirocyclohexene-3-oxindole derivatives. These derivatives undergo further transformations, including dibromination, dihydroxylation, epoxidation, Wacker oxidation at the double bond. Hydrogenation of spirocyclohexene-3-oxindole yields spirocyclohexane-3-oxindoles. Their subsequent acid-catalyzed ring expansion/aromatization, dependent on the acid catalyst, results in either cyclohepta[b]indoles or cyclohepta[b]indole-indoline conjugates, adding a unique synthetic dimension. The utility of this methodology is exemplified through the synthesis of an A-FABP inhibitor, showcasing its potential in pharmaceutical applications.

RESUMEN

Zwitterionic ring-expansion polymerization (ZREP) is a polymerization method in which a cyclic monomer is converted into a cyclic polymer through a zwitterionic intermediate. In this review, we explored the ZREP of various cyclic polymers and how mass spectrometry assists in identifying the product architectures and understanding their intricate reaction mechanism. For the majority of polymers (from a few thousand to a few million Da) matrix-assisted laser desorption/ionization time-of-flight mass spectrometry is the most effective mass spectrometry technique to determine the true molecular weight (MW) of the resultant product, but only when the dispersity is low (approximately below 1.2). The key topics covered in this study were the ZREP of cyclic polyesters, cyclic polyamides, and cyclic ethers. In addition, this study also addresses a number of other preliminary topics, including the ZREP of cyclic polycarbonates, cyclic polysiloxanes, and cyclic poly(alkylene phosphates). The purity and efficiency of those syntheses largely depend on the catalyst. Among several catalysts, N-heterocyclic carbenes have exhibited high efficiency in the synthesis of cyclic polyesters and polyamides, whereas tris(pentafluorophenyl)borane [B(C6F5)3] is the most optimal catalyst for cyclic polyether synthesis.

RESUMEN

Polymers with cyclic topology have no terminal structure and, therefore, exhibit various unique physical and functional properties compared to those of linear analogs. In this paper, we report an innovative methodology for the synthesis of cyclic polymers via ring-expansion RAFT (RE-RAFT) polymerization of vinyl monomers using a cyclic trithiocarbonate derivative (CTTC) as a RAFT agent. RE-RAFT of tert-butyl acrylate (TBA) was performed to yield a mixture of polymers exhibiting a bimodal size exclusion chromatography (SEC) trace. Both the peak top molecular weights shifted to higher-molecular-weight regions as the monomer conversion increased. The structure of the resulting polymer mixture was examined by 1H NMR and MALDI-TOF-MS. Detailed studies indicated that the obtained polymer of higher molecular weight was one of the large-sized cyclic polymers generated by the fusion of smaller-sized cyclic polymers during the RE-RAFT polymerization process. This approach opens the door to the simple synthesis of well-controlled cyclic polymers with complex structures, such as alternating and multi-block repeat unit sequences.

RESUMEN

The construction of a small molecule library that includes compounds with medium-sized rings is increasingly essential in drug discovery. These compounds are essential for identifying novel therapeutic agents capable of targeting "undruggable" targets through high-throughput and high-content screening, given their structural complexity and diversity. However, synthesizing medium-sized rings presents notable challenges, particularly with direct cyclization methods, due to issues such as transannular strain and reduced degrees of freedom. This review presents an overview of current strategies in synthesizing medium-sized rings, emphasizing innovative approaches like ring-expansion reactions. It highlights the challenges of synthesis and the potential of these compounds to diversify the chemical space for drug discovery, underscoring the importance of medium-sized rings in developing new bioactive compounds.

Asunto(s)

RESUMEN

The reaction of the amine-stabilized alane (NMe3) ⋅ AlH3 1 with the backbone-saturated N-heterocyclic carbene (NHC) SIDipp (SIDipp=1,3-bis-{2,6-di-iso-propyl-phenyl}-imidazolidin-2-ylidene) at 0 °C yielded the NHC alane adduct (SIDipp) ⋅ AlH3 2. Reaction at elevated temperatures or prolonged reaction at room temperature gave the product of a ring expansion reaction (RER) of the NHC, (NMe3) ⋅ AlH(RER-SIDippH2) 3 ⋅ (NMe3). Subsequent reaction of the latter with sterically less hindered NHCs (IMeMe {=1,3,4,5-tetramethyl-imidazolin-2-ylidene}, IiPrMe {=1,3-di-iso-propyl-4,5-dimethyl-imidazolin-2-ylidene}, and IiPr {=1,3-di-iso-propyl-imidazolin-2-ylidene}) afforded the NHC-stabilized RER-products (NHC) ⋅ AlH(RER-SIDippH2) 3 ⋅ (NHC) (NHC=IMeMe, IiPrMe, IiPr), while no reaction was observed with the sterically more demanding NHCs IDipp (=1,3-bis-{2,6-di-iso-propyl-phenyl}-imidazolin-2-ylidene), SIDipp and ItBu (=1,3-di-tert-butyl-imidazolin-2-ylidene). The compounds 3 ⋅ (NHC) were also obtained starting from (SIDipp) ⋅ AlH3 2 and NHC at room temperature. Heating solutions of (SIDipp) ⋅ AlH3 2 without additional base to 95 °C resulted in decarbonization of the NHC and substitution of the carbene carbon atom with aluminum hydride under loss of ethene. Subsequent dimerization afforded cis-[AlH{µ-N(Dipp)CH2CH2N(Dipp)}]2 4_dimer. Heating solutions of the NHC-ligated aluminum alkyls (SIDipp) ⋅ AlR3 2R (R=Me, Et) to 145 °C instead led to complete scission of the NHC backbone with evolution of ethene and isolation of the dialkylaluminium(III) amidinates {DippNC(R)NDipp}AlR2 5R (R=Me, Et).

RESUMEN

Cyclic ß,ß-difluoro-carbonyl compounds have a venerable history as drug discovery leads, but limitations in the synthesis arsenal continue to impede chemical space exploration. This challenge is particularly acute in the arena of fluorinated medium rings where installing the difluoromethylene unit subtly alters the ring conformation by expanding the internal angle (∠C-CF2-C>∠C-CH2-C): this provides a handle to modulate physicochemistry (e.g. pKa). To reconcile this disparity, a highly modular ring expansion has been devised that leverages simple α,ß-unsaturated esters and amides, and processes them to one-carbon homologated rings with concomitant geminal difluorination (6 to 10 membered rings, up to 95 % yield). This process is a rare example of the formal difluorination of an internal alkene and is enabled by sequential I(III)-enabled O-activation. Validation of enantioselective catalysis in the generation of unprecedented medium ring scaffolds is reported (up to 93 : 7 e.r.) together with X-ray structural analyses and product derivatization.

RESUMEN

Herein, we present a unified chemical synthesis of three subgroups of cephalotaxus diterpenoids. Key to the success lies in adopting a synthetic strategy that is inspired by biosynthesis but is opposite in nature. By employing selective one-carbon introduction and ring expansion operations, we have successfully converted cephalotane-type C18 dinorditerpenoids (using cephanolide B as a starting material) into troponoid-type C19 norditerpenoids and intact cephalotane-type C20 diterpenoids. This synthetic approach has enabled us to synthesize cephinoid H, 13-oxo-cephinoid H, 7-oxo-cephinoid H, fortalpinoid C, 7-epi-fortalpinoid C, cephanolide E, and 13-epi-cephanolide E. Furthermore, through the development of an intermolecular asymmetric Michael reaction between ß-oxo esters and ß-substituted enones, we have achieved the enantioselective synthesis of advanced intermediates within our synthetic sequence, thus formally realizing the asymmetric total synthesis of the cephalotaxus diterpenoids family.

Asunto(s)

RESUMEN

Herein, we successfully inhibited the preferential homodimerization and C-Si/Si-H bond cross-exchange of benzosilacyclobutenes and monohydro-silacyclobutanes and achieved the first highly selective C-Si/C-Si bond cross-exchange reaction by deliberately tuning the Ni-catalytic system, which constitutes a powerful and atom-economical ring expansion method for preparing medium-sized cyclic compounds bearing two silicon atoms at the ring junction, which are otherwise inaccessible. The DFT calculation explicitly elucidated the pivotal role of Si-H bond at silacyclobutanes and the high ring strain of two substrates in realizing the two C-Si bonds cleavage and reformation in the catalytic cycle.

RESUMEN

A direct route to a doubly ferrocene bridged tetracyclic tetraphosphane 1 was developed via reductive coupling of Fe(CpPCl2)2 (2 a), where a chlorine terminated linear P4-compound 3 could be identified as an intermediate. Selective P-P bond activation was further achieved by reacting 1 with elemental selenium or [Cp*Al]4, where regioselective insertion of Se or Al atoms resulted in ferrocenylene bridged [P4Se] (4) or [P4Al] (7) moieties. Compound 7 can be transformed to a hydrogen terminated linear P4 species, 8, with protic solvents. Methylation of compound 1 with MeOTf, proceeds via intermediate formation of monomethylated species 5, which gradually produced Me2-terminated dicationic 6, again containing a linear P4-unit. Besides spectroscopic characterization, the structural details of compounds 1, 4, 6, and 8 could be determined by SC-XRD. Moreover, DFT calculations were used to rationalize the reactivity of 1, derived compounds and intermediates. As a key feature, 1 undergoes ring opening polymerization to a linear polyphosphane 9.

RESUMEN

Azetidines, being four-membered N-heterocycles, possess significant potential in contemporary medicinal chemistry owing to their favorable pharmacokinetic properties. Regrettably, the incorporation of functionalized azetidines into pharmaceutical lead structures has been impeded by the absence of efficient synthetic methods for their synthesis. In this study, a Rh-catalyzed one-carbon ring expansion of aziridines with vinyl-N-triftosylhydrazones is presented, which facilitates the synthesis of high value-added 2-alkenyl azetidine products. This research represents the first example of ring expansion of aziridines enabled by vinyl carbenes. Additionally, a one-pot two-step protocol, initiated from cinnamaldehyde, was successfully achieved, offering a step-economical and facile approach for the synthesis of these compounds. The pivotal aspect of this successful transformation lies in the in situ formation of an alkenyl aziridinium ylide intermediate. Experimental investigations, coupled with computational studies, suggest that a diradical pathway is involved in the reaction mechanism.

RESUMEN

Benzo-fused nitrogen heterocycles are common features of bioactive molecules, and the enantioselective synthesis of their substituted analogues is an important goal. In this paper we demonstrate a practical and mechanistically intriguing approach to the enantioselective synthesis of 1-arylbenzazepines and their analogues. The reaction sequence starts with an asymmetric migratory ring expansion of indoline, tetrahydroquinoline, or tetrahydrobenzazepine ureas on treatment with a chiral lithium amide base. Treatment of the ring-expanded ureas with acid triggers a two-atom ring contraction-an 'azatropic shift' in which one urea nitrogen displaces the other-with almost complete retention of stereochemistry. Aminolysis of the urea products provides enantioenriched 1-aryl-tetrahydrobenzazepine derivatives and their congeners, including an analogue of an intermediate in the synthesis of the drug solifenacin. Deuteration, in situ IR, and DFT studies provide evidence for the mechanisms of the reaction steps.

RESUMEN

Macrocyclic and medium-sized ring ketones, lactones and lactams can all be made from common acryloyl imide starting materials through divergent, one-pot cascade ring-expansion reactions. Following either conjugate addition with an amine or nitromethane, or osmium(VIII)-catalysed dihydoxylation, rearrangement through a four-atom ring expansion takes place spontaneously to form the ring expanded products. A second ring expansion can also be performed following a second iteration of imide formation and alkene functionalisation/ring expansion. In the dihydroxylation series, three- or four-atom ring expansion can be performed selectively, depending on whether the reaction is under kinetic or thermodynamic control.

RESUMEN

3-Fluorinated quinolines and pyridines are prevalent pharmacophores, yet their synthesis is often challenging. Herein, we demonstrate that dibromofluoromethane as bromofluorocarbene source enables the one-carbon ring expansion of readily available indoles and pyrroles to structurally diverse 3-fluorinated quinolines and pyridines. This straightforward protocol requires only a short reaction time of ten minutes and can be performed under air atmosphere. Preliminary investigations reveal that this strategy can also be applied to the synthesis of other valuable azines by using different 1,1-dibromoalkanes as bromocarbene sources.

RESUMEN

An in situ generated photoactive copper(I)-complex-catalyzed aziridination reaction of cyclic N-sulfonyl imines with α-aryl-substituted vinyl azides irradiated by blue-LEDs light is reported for the first time. This novel SET process represents a mild, sustainable, and pragmatic method for accessing synthetically resourceful sulfamidate-fused aziridines in acceptable chemical yields with excellent diastereoselectivities. Delightedly, pharmacologically attractive benzo[f][1,2,3]oxathiazepine dioxides and fused isoxazoline frameworks were achieved through our newly developed metal-free based ring-expansion techniques, highlighting the synthetic value of accessed aziridines. Finally, the possible mechanism for [2+1] aza-cyclization was presented based on the conduction of a series of control experiments.

RESUMEN

Reactions of 5-SIDipp ⋅ BH3 (5-SIDipp=1,3-bis(2,6-diisopropylphenyl)-imidazolin-2-ylidene) (1) with diphenyldiselenide provide access to 5-SIDipp-boryl mono- (5-SIDipp ⋅ BH2 SePh) (2) and bis-selenide (5-SIDipp ⋅ BH(SePh)2 ) (3). The facile cleavage of the B-Se bond makes 2 a neutral source of selenium nucleophiles in substitutions reactions with benzyl bromides, and provide access to the corresponding selenoethers. The direct transformations of one of the C(sp2 )-F bonds of C5 F5 N and C6 F5 CF3 to C-Se bonds have also been achieved by the use of 2 without employing transition-metal catalysts. While it was previously established that C6 F6 could undergo complete defluoroselenation under harsh conditions, we successfully achieved partial defluorination of C6 F6 by employing 2 as a mild selenide transfer reagent. During the formation of C-Se bonds through the cleavage of C-F bonds, the potential by-product NHC ⋅ BH2 F undergoes ring expansion of the NHC, leading to the formation of the six-membered diaazafluoroborinane (7).