RESUMEN

Aqueous emulsion polymerization is a robust technique for preparing nanoparticles of block copolymers; however, it typically yields spherical nanoassemblies. The scale preparation of nanoassemblies with nonspherical high-order morphologies is a challenge, particularly 2D core-shell nanosheets. In this study, the polymerization-induced self-assembly (PISA) and crystallization-driven self-assembly (CDSA) are combined to demonstrate the preparation of 2D nanosheets and their aggregates via aqueous reversible addition-fragmentation chain transfer (RAFT) emulsion polymerization. First, the crucial crystallizable component for CDSA, hydroxyethyl methacrylate polycaprolactone (HPCL) macromonomer is synthesized by ring opening polymerization (ROP). Subsequently, the RAFT emulsion polymerization of HPCL is conducted to generate crystallizable nanomicelles by a grafting-through approach. This PISA process simultaneously prepared spherical latices and bottlebrush block copolymers comprising poly(N',N'-dimethylacrylamide)-block-poly(hydroxyethyl methacrylate polycaprolactone) (PDMA-b-PHPCL). The latexes are now served as seeds for inducing the formation of 2D hexagonal nanosheets, bundle-shaped and flower-like aggregation via the CDSA of PHPCL segments and unreacted HPCL during cooling. Electron microscope analysis trace the morphology evolution of these 2D nanoparticles and reveal that an appropriate crystallized component of PHPCL blocks play a pivotal role in forming a hierarchical structure. This work demonstrates significant potential for large-scale production of 2D nanoassemblies through RAFT emulsion polymerization.

RESUMEN

Styrene-maleic acid (SMA) copolymer has received much attention for its excellent solubilization characteristics. In this work, SMA copolymer brush-based chromatographic stationary phases were exploited and developed for the first time. First, SMA copolymer brush was in situ grown on the surface of spherical silica via living/controlled reversible addition-fragmentation chain transfer (RAFT) polymerization method. Subsequently, as a proof-of-concept demonstration, the copolymer was esterified by diethylene glycol mono-2-ethylhexyl ether (DGME) and 2-(2-ethylhexyloxy) ethanol (EHOE), respectively. The obtained Sil-SMA-DGME and Sil-SMA-EHOE copolymer-brush chromatographic stationary phases were characterized by transmission electron microscopy, Fourier transform infrared spectrometer, X-ray photoelectron spectroscopy, and thermogravimetric analysis, respectively. The chromatographic retention mechanism indicated that both the two packed columns exhibited hydrophilic/reverse mixed-mode retention modes. The maximum column efficiency was up to 71,000 N/m. The chromatographic separation performance evaluation indicated that the novel kind of stationary phases had excellent separation capabilities for hydrophilic, hydrophobic compounds and phospholipid standards. In addition, by combination with mass spectrometry identification, the Sil-SMA-DGME column was further exploited for separation and identification of phospholipids in human lung cancer cells. Totally, 9 classes including 186 phospholipid species were successfully identified. The results demonstrated the promising application prospects of the novel kind of SMA copolymer-brush chromatographic stationary phases.

Asunto(s)

RESUMEN

HYPOTHESIS: Pyrene derivatives are effective motifs when designing graphene-philic surfactants, enabling the use of hydrophobic graphene-based nanomaterials in waterborne formulations. Hence, novel pyrene end-functionalized polymeric stabilizers show promise for stabilizing aqueous graphene nanomaterial dispersions, and offer benefits over traditional small molecule surfactants. EXPERIMENTS: Pyrene end-functionalized poly(methacrylic acid) (Py-PMAAn, where n = 68 to 128) was synthesized by reversible addition-fragmentation chain-transfer (RAFT) polymerization of MAA using a pyrene-containing RAFT chain-transfer agent. These polymers were evaluated as aqueous graphene nanoplatelet (GNP) stabilizers. Subsequently, polymer-stabilized GNPs were formulated into film-forming polymer latex dispersions and the properties of the resulting GNP-containing films measured. FINDINGS: Py-PMAAn homopolymers with well-defined molecular weights were prepared via RAFT solution polymerization. They served as efficient stabilizers for aqueous GNP dispersions and performed better than a traditional small molecule surfactant and non-functionalized PMAA, especially at higher pH and with higher molecular weight polymers. The use of Py-PMAAn allowed GNPs to be readily formulated into waterborne latex coatings. When compared to controls, the resulting films were significantly reinforced due to the improved homogeneity of dried nanocomposite films and chain entanglement between the polymer matrix and stabilizers. Thus, the ability to readily incorporate GNPs into aqueous formulations and enhance GNP/polymer matrix interfaces was demonstrated for these novel amphiphilic stabilizers.

RESUMEN

The development of new materials for antifreezing and anti-icing applications is a big challenge in industry and academic area. Inspired by the antifreeze proteins, latex particles with superhydrophilic zwitterionic shells and superhydrophobic cores are synthesized by reversible addition-fragmentation chain transfer emulsion polymerization, and the applications of the latex particles in antifreezing and anti-icing applications are investigated. In antifreezing study, the critical aggregate temperature (CAT) of the latex particles decreases, and the separation of the melting and freezing temperature of ice increases with the particle concentration. Enzyme molecules can be cryopreserved in the particle solution, and their bioactivities are well maintained. Latex particles are casted into latex films with dynamic surfaces. Anti-icing performances, including antifrosting properties, freezing delay time, and ice adhesion strengths, are studied; and the water-treated latex films present stronger anti-icing properties than other films, due to the synergistic effects of the superhydrophilic and superhydrophobic components. In addition, latex particles with zwitterionic shells and poly(n-butyl methacrylate) cores, and latex particles with small molecular surfactant on the surfaces are synthesized. The antifreezing performances of the latex particles and anti-icing properties of the latex films are compared.

RESUMEN

The single-unit monomer insertion (SUMI), derived from living/controlled polymerization, can be directly functionalized at the end or within the chain of polymers prepared by living/controlled polymerization, offering potential applications in the preparation of polymers with complex architectures. Many scenarios demand the simultaneous incorporation of monomers suitable for different polymerization methods into complex polymers. Therefore, it becomes imperative to utilize SUMI technologies with diverse mechanisms, especially those that are compatible with each other. Here, we reported the orthogonal SUMI technique, seamlessly combining radical and cationic SUMI approaches. Through the careful optimization of monomer and chain transfer agent pairs and adjustments to reaction conditions, we can efficiently execute both radical and cationic SUMI processes in one pot without mutual interference. The utilization of orthogonal SUMI pairs facilitates the integration of radical and cationic reversible addition-fragmentation chain transfer (RAFT) polymerization in various configurations. This flexibility enables the synthesis of diblock, triblock, and star polymers that incorporate both cationically and radically polymerizable monomers. Moreover, we have successfully implemented a mixing mechanism of free radicals and cations in RAFT step-growth polymerization, resulting in the creation of a side-chain sequence-controlled polymer brushes.

RESUMEN

Polymerization-induced self-assembly (PISA) is a powerful and versatile technique for producing colloidal dispersions of block copolymer particles with desired morphologies. Currently, PISA can be carried out in various media, over a wide range of temperatures, and using different mechanisms. This method enables the production of biodegradable objects and particles with various functionalities and stimuli sensitivity. Consequently, PISA offers a broad spectrum of potential commercial applications. The aim of this review is to provide an overview of the current state of rational synthesis of block copolymer particles with diverse morphologies using various PISA techniques and mechanisms. The discussion begins with an examination of the main thermodynamic, kinetic, and structural aspects of block copolymer micellization, followed by an exploration of the key principles of PISA in the formation of gradient and block copolymers. The review also delves into the main mechanisms of PISA implementation and the principles governing particle morphology. Finally, the potential future developments in PISA are considered.

RESUMEN

Nonconventional luminescent polymers have become research hotspots due to their advantages such as persistent room temperature phosphorescence (p-RTP) emission and strong film-forming properties. It is proven that the molecular weight (MW) of such luminescent polymers has a significant impact on their emission over a large range, generally with a red shift as the MW increases. Herein, four controllable MW polyacrylamides are prepared via reversible addition-fragmentation chain transfer polymerization (RAFT), and their photoluminescence quantum yield and p-RTP lifetimes gradually increase with the increasing MW. The emission of p-RTP gradually shifts blue with increasing MW, which is likely due to the gradually changing interactions between the electron-rich portion in RAFT reagent and the increasing acrylamide (AM) units in the molecular chain. These can be reasonably explained through small angle X-ray scattering, the clustering-triggered emission (CTE) mechanism, and supported by theoretical calculations. Powder with controllable p-RTP capability has the potential for strategic anti-counterfeiting encryption. The above results not only promote the development of the CTE mechanism toward more precise explanations but also provide new ideas for the preparation of nonconventional luminescent polymers with controllable p-RTP emission performance.

Asunto(s)

RESUMEN

Thermo-responsive diblock copolymer, poly(N-isopropylacrylamide)-block-poly(N-vinylisobutyramide) was synthesized via switchable reversible addition-fragmentation chain transfer (RAFT) polymerization and its thermal transition behavior was studied. Poly(N-vinylisobutyramide) (PNVIBA), a structural isomer of poly(N-isopropylacrylamide) (PNIPAM) shows a thermo-response character but with a higher lower critical solution temperature (LCST) than PNIPAM. The chain extension of the PNVIBA block from the PNIPAM block proceeded in a controlled manner with a switchable chain transfer reagent, methyl 2-[methyl(4-pyridinyl)carbamothioylthio]propionate. In an aqueous solution, the diblock copolymer shows a thermo-responsive behavior but with a single LCST close to the LCST of PNVIBA, indicating that the interaction between the PNIPAM segment and the PNVIBA segment leads to cooperative aggregation during the self-assembly induced phase separation of the diblock copolymer in solution. Above the LCST of the PNIPAM block, the polymer chains begin to collapse, forming small aggregates, but further aggregation stumbled due to the PNVIBA segment of the diblock copolymer. However, as the temperature approached the LCST of the PNVIBA block, larger aggregates composed of clusters of small aggregates formed, resulting in an opaque solution.

RESUMEN

The compositional scope of polymer zwitterions has grown significantly in recent years and now offers designer synthetic materials that are broadly applicable across numerous areas, including supracolloidal structures, electronic materials interfaces, and macromolecular therapeutics. Among recent developments in polymer zwitterion syntheses are those that allow insertion of reactive functionality directly into the zwitterionic moiety, yielding new monomer and polymer structures that hold potential for maximizing the impact of zwitterions on the macromolecular materials chemistry field. This manuscript describes the preparation of zwitterionic choline phosphate (CP) methacrylates containing either aromatic or aliphatic thiols embedded directly into the zwitterionic moiety. The polymerization of these functional CP methacrylates by reversible addition-fragmentation chain-transfer methodology yields polymeric zwitterionic thiols containing protected thiol functionality in the zwitterionic units. After polymerization, the protected thiols are liberated to yield thiol-rich polymer zwitterions which serve as precursors to subsequent reactions that produce polymer networks as well as polymer-protein bioconjugates.

Asunto(s)

RESUMEN

Cellulose-based materials are a sustainable alternative to polymers derived from petroleum. Cellulose nanocrystal (CNC) is a biopolymer belonging to this family; it is commonly known for its important physical and chemical properties and ability to form a film. Modifying CNC via electrostatic interaction provided by cationic polymers is a facile and promising technique to enlarge the application of CNC. Herein, we report the preparation of films, from blends of negatively charged CNC and positively charged poly (trimethyl aminoethyl methacrylate) (PTMAEMA). The interaction between CNC and PTMAEMA was verified by using a quartz crystal microbalance with dissipation monitoring (QCM-D), as well as by measuring the particle size and ζ-potential of the casting mixture. To favor the application of the nanocomposite film in water treatment, the film was supported on Whatman™ paper, and adsorption tests were conducted using perfluorooctanoic acid (PFOA) as a model compound for the family of persistent fluorinated pollutants known as PFAS (per- and polyfluoroalkyl substances).

RESUMEN

Their inherent directional information renders patchy particles interesting building blocks for advanced applications in materials science. In this study, a feasible method to fabricate patchy silicon dioxide microspheres is demonstrated, which they are able to equip with tailor-made polymeric materials as patches. Their fabrication method relies on a solid-state supported microcontact printing (µCP) routine optimized for the transfer of functional groups to capillary-active substrates, which is used to introduce amino functionalities as patches to a monolayer of particles. Acting as anchor groups for polymerization, photo-iniferter reversible addition-fragmentation chain-transfer (RAFT) is used to graft polymer from the patch areas. Accordingly, particles with poly(N-acryloyl morpholine), poly(N-isopropyl acrylamide), and poly(n-butyl acrylate) are prepared as representative acrylic acid-derived functional patch materials. To facilitate their handling in water, a passivation strategy of the particles for aqueous systems is introduced. The protocol introduced here, therefore, promises a vast degree of freedom in engineering the surface properties of highly functional patchy particles. This feature is unmatched by other techniques to fabricate anisotropic colloids. The method, thus, can be considered a platform technology, culminating in the fabrication of particles that possess locally precisely formed patches on particles at a low µm scale with a high material functionality.

RESUMEN

Sonodynamic therapy is widely used in clinical studies including cancer therapy. The development of sonosensitizers is important for enhancing the generation of reactive oxygen species (ROS) under sonication. Herein, we have developed poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC)-modified TiO2 nanoparticles as new biocompatible sonosensitizers with high colloidal stability under physiological conditions. To fabricate biocompatible sonosensitizers, a grafting-to approach was adopted with phosphonic-acid-functionalized PMPC, which was prepared by reversible addition-fragmentation chain transfer (RAFT) polymerization of 2-methacryloyloxyethyl phosphorylcholine (MPC) using a newly designed water-soluble RAFT agent possessing a phosphonic acid group. The phosphonic acid group can conjugate with the OH groups on the TiO2 nanoparticles. We have clarified that the phosphonic acid end group is more crucial for creating colloidally stable PMPC-modified TiO2 nanoparticles under physiological conditions than carboxylic-acid-functionalized PMPC-modified ones. Furthermore, the enhanced generation of singlet oxygen (1O2), an ROS, in the presence of PMPC-modified TiO2 nanoparticles was confirmed using a 1O2-reactive fluorescent probe. We believe that the PMPC-modified TiO2 nanoparticles prepared herein have potential utility as novel biocompatible sonosensitizers for cancer therapy.

RESUMEN

To monitor the release of fluorinated drugs from polymeric carriers, a novel 19F MRI enzyme-responsive contrast agent was developed and tested. This contrast agent was prepared by conjugation of 5-fluorouracil (5-FU) to hyperbranched poly(N,N-dimethylacrylamide) (HB-PDMA) via an enzyme-degradable peptide linker. Due to the different molecular sizes, the release of 5-FU from the 5-FU polymer conjugate resulted in a sufficiently substantial difference in spin-spin T219F NMR/MRI relaxation time that enabled differentiating between attached and released drug states. The 5-FU polymer conjugate exhibited a broad signal and short T2 relaxation time under 19F NMR analysis. Incubation with the enzyme induced the release of 5-FU, accompanied by an extension of T2 relaxation times and an enhancement in the 19F MRI signal. This approach is promising for application in the convenient monitoring of 5-FU drug release and can be used to monitor the release of other fluorinated drugs.

RESUMEN

Solid polymer electrolytes (SPEs) offer several advantages compared to their liquid counterparts, and much research has focused on developing SPEs with enhanced mechanical properties while maintaining high ionic conductivities. The recently developed polymerization-induced microphase separation (PIMS) technique offers a straightforward pathway to fabricate bicontinuous nanostructured materials in which the mechanical properties and conductivity can be independently tuned. In this work SPEs with tunable mechanical properties and conductivities are prepared via digital light processing 3D printing, exploiting the PIMS process to achieve nanostructured ion-conducting materials for energy storage applications. A rigid crosslinked poly(isobornyl acrylate-stat-trimethylpropane triacrylate) scaffold provided materials with room temperature shear modulus above 400 MPa, while soft poly(oligoethylene glycol methyl ether acrylate) domains containing the ionic liquid 1-butyl-3-methylimidazolium bis-(trifluoromethyl sulfonyl)imide endowed the material with ionic conductivity up to 1.2 mS cm-1 at 30 °C. These features make the 3D-printed SPE very competitive for applications in all solid energy storage devices, including supercapacitors.

RESUMEN

An amphiphilic diblock copolymer (PChM-PNIPAM), composed of poly(cholesteryl 6-methacryloyloxy hexanoate) (PChM) and poly(N-isopropyl acrylamide) (PNIPAM) blocks, was prepared via reversible addition-fragmentation chain transfer radical polymerization. The PChM and PNIPAM blocks exhibited liquid crystalline behavior and a lower critical solution temperature (LCST), respectively. PChM-PNIPAM formed water-soluble polymer micelles in water below the LCST because of hydrophobic interactions of the PChM blocks. The PChM and PNIPAM blocks formed the core and hydrophilic shell of the micelles, respectively. With increasing temperature, the molecular motion of the pendant cholesteryl groups increased, and a liquid crystalline phase transition occurred from an amorphous state in the core. With further increases in temperature, the PNIPAM block in the shell exhibited the LCST and dehydrated. Hydrophobic interactions of the PNIPAM shells resulted in inter-micellar aggregation above the LCST.

RESUMEN

For the first time, double stimuli-responsive properties of poly(N-isopropylacrylamide) (PNIPA) and poly(1-vinylimidazole) (PVIM) block copolymers in aqueous solutions were studied. The synthesis of PNIPA60-b-PVIM90 and PNIPA28-b-PVIM62-b-PNIPA29 was performed using reversible addition-fragmentation chain transfer (RAFT) polymerization. The polymers were characterized by size exclusion chromatography and 1H NMR spectroscopy. The conformational behavior of the polymers was studied using dynamic light scattering (DLS) and fluorescence spectroscopy (FS). It was found that PNIPA and block copolymers conformation and ability for self-assembly in aqueous medium below and above cloud point temperature depend on the locus of hydrophobic groups derived from the RAFT agent within the chain. Additionally, the length of PVIM block, its locus in the chain and charge perform an important role in the stabilization of macromolecular micelles and aggregates below and above cloud point temperature. At 25 °C the average hydrodynamic radius (Rh) of the block copolymer particles at pH 3 is lower than at pH 9 implying the self-assembling of macromolecules in the latter case. Cloud points of PNIPA60-b-PVIM90 are ~43 °C and ~37 °C at a pH of 3 and 9 and of PNIPA28-b-PVIM62-b-PNIPA29 they are ~35 °C and 31 °C at a pH of 3 and 9. Around cloud point independently of pH, the Rh value for triblock copolymer rises sharply, achieves the maximum value, then falls and reaches the constant value, while for diblock copolymer, it steadily grows after reaching cloud point. The information about polarity of microenvironment around polymer obtained by FS accords with DLS data.

Asunto(s)

RESUMEN

The application of reversible deactivation radical polymerization techniques in 3D printing is emerging as a powerful method to build "living" polymer networks, which can be easily postmodified with various functionalities. However, the building speed of these systems is still limited compared to commercial systems. Herein, a digital light processing (DLP)-based 3D printing system via photoinduced free radical-promoted cationic reversible addition-fragmentation chain transfer polymerization of vinyl ethers, which can build "living" objects by a commercial DLP 3D printer at a relatively fast building speed (12.99 cm h-1 ), is reported. The polymerization behavior and printing conditions are studied in detail. The livingness of the printed objects is demonstrated by spatially controlled postmodification with a fluorescent monomer.

RESUMEN

We describe a method of partial moments devised for accurate simulation of the time/conversion evolution of polymer composition and molar mass. Expressions were derived that enable rigorous evaluation of the complete molar mass and composition distribution for shorter chain lengths (e.g., degree of polymerization, Xn = N < 200 units) while longer chains (Xn ≥ 200 units) are not neglected, rather they are explicitly considered in terms of partial moments of the molar mass distribution, µxN(P)=∑n=N+1∞nx[Pn] (where P is a polymeric species and n is its' chain length). The methodology provides the exact molar mass distribution for chains Xn < N, allows accurate calculation of the overall molar mass averages, the molar mass dispersity and standard deviations of the distributions, provides closure to what would otherwise be an infinite series of differential equations, and reduces the stiffness of the system. The method also allows for the inclusion of the chain length dependence of the rate coefficients associated with the various reaction steps (in particular, termination and propagation) and the various side reactions that may complicate initiation or initialization. The method is particularly suited for the detailed analysis of the low molar mass portion of molar mass distributions of polymers formed by radical polymerization with reversible addition-fragmentation chain transfer (RAFT) and is relevant to designing the RAFT-synthesis of sequence-defined polymers. In this paper, we successfully apply the method to compare the behavior of thermally initiated (with an added dialkyldiazene initiator) and photo-initiated (with a RAFT agent as a direct photo-iniferter) RAFT-single-unit monomer insertion (RAFT-SUMI) and oligomerization of N,N-dimethylacrylamide (DMAm).

RESUMEN

Nanoporous track-etched membranes (TeM) are promising materials as adsorbents to remove toxic pollutants, but control over the pore diameter and density in addition to precise functionalization of nanochannels is crucial for controlling the surface area and efficiency of TeMs. This study reported the synthesis of functionalized PET TeMs as high-capacity sorbents for the removal of trivalent arsenic, As(III), which is more mobile and about 60 times more toxic than As(V). Nanochannels of PET-TeMs were functionalized by UV-initiated reversible addition fragmentation chain transfer (RAFT)-mediated grafting of 2-(dimethyamino)ethyl methacrylate (DMAEMA), allowing precise control of the degree of grafting and graft lengths within the nanochannels. Ag NPs were then loaded onto PDMAEMA-g-PET to provide a hybrid sorbent for As(III) removal. The As(III) removal efficiency of Ag@PDMAEMA-g-PET, PDMAEMA-g-PET, and pristine PET TeM was compared by adsorption kinetics studies at various pH and sorption times. The adsorption of As(III) by Ag@DMAEMA-g-PET and DMAEMA-g-PET TeMs was found to follow the Freundlich mechanism and a pseudo-second-order kinetic model. After 10 h, As(III) removal efficiencies were 85.6% and 56% for Ag@PDMAEMA-g-PET and PDMAEMA-g-PET, respectively, while PET template had a very low arsenic sorption capacity of 17.5% at optimal pH of 4.0, indicating that both PDMAEMA grafting and Ag-NPs loading significantly increased the As(III) removal capacity of PET-TeMs.

RESUMEN

ß-blockers are a class of medications that are used to treat abnormal heart rhythms and hypertension. Molecularly imprinted polymers (MIPs) capable of selective recognizing and extracting ß-blockers from complex biological samples hold great promise in bioanalytical and biomedical applications, but developing such artificial receptor materials is still challenging. Herein, we introduce a simple one-step method for the synthesis of well-defined molecularly imprinted nanospheres in high yield (83.6-94.4%) via reversible addition-fragmentation chain transfer (RAFT) precipitation polymerization for the selective recognition and extraction of the ß-blockers from human serum. The prepared MIPs are characterized in terms of morphology, pore properties, binding kinetics, capacity, selectivity, and recognition mechanisms. The uniform nanoscale-imprinted layer favored the rapid mass transfer of ß-blockers. The binding studies showed the high adsorption capacity (126.8 µmol/g) and selectivity of the developed nanomaterial. The investigation on the recognition mechanism reveals that multiple driving forces participate in the binding between MIP and ß-blockers, where hydrogen bonding plays as the dominating role for the specific recognition. The MIP was successfully applied for the direct enrichment of five ß-blockers from human serum with HPLC recoveries ranging from 82.9 to 100.3% and RSD of 0.5-6.9% (n = 3).

Asunto(s)