RESUMEN

Athelia rolfsii, causal agent of "southern blight" disease, is a soilborne fungal pathogen with a wide host range of more than 500 species. This study's objectives were to (i) quantify the effects of two environmental factors, temperature and soil moisture, on germination of A. rolfsii inoculum (sclerotia), which is a critical event for the onset of disease epidemics and (ii) predict the timing of sclerotial germination by applying population-based threshold-type hydrothermal time (HTT) models. We conducted in vitro germination experiments with three isolates of A. rolfsii isolated from peanuts, which were tested at five temperatures (T), ranging from 17 to 40°C, four matric potentials (Ψm) between -0.12 and -1.57 MPa, and two soil types (fine sand and loamy fine sand), using a factorial design. When Ψm was maintained between -0.12 and -0.53 MPa, T from 22 to 34°C was found to be conducive to sclerotial germination (>50%). The HTT models were fitted for a range of T (22 to 34°C) and Ψm (-0.12 to -1.57 MPa) that accounted for 84% or more of variation in the timing of sclerotial germination. The estimated base T ranged between 0 and 4.5°C and the estimated base Ψm between -2.96 and -1.52 MPa. The results suggest that the HTT modeling approach is a suitable means of predicting the timing of A. rolfsii sclerotial germination. This HTT methodology can potentially be tested to fine-tune fungicide application timing and in-season A. rolfsii management strategies. [Formula: see text] Copyright © 2024 The Author(s). This is an open access article distributed under the CC BY 4.0 International license.

Asunto(s)

RESUMEN

Xylem is a complex tissue that forms the bulk of tree bodies and has several functions, including to conduct water, store water and nutrients, and biomechanically support the plant body. We examined how xylem functional traits varied at different positions within 9-year-old Populus balsamifera subsp. trichocarpa. Whole trees were excavated, and xylem samples were collected at 1-m increments along the main root-to-shoot axis of six trees, from root tip to shoot tip. We examined biomechanical and water-storage traits of the xylem, including using a non-invasive imaging technique to examine water content within long, intact branches (high-resolution computed tomography; microCT). Xylem density, strength, and stiffness were greater in shoots than roots. Along the main root-to-shoot axis, xylem strength and stiffness were greatest at shoot tips, and the tissue became linearly weaker and less stiff down the plant and through the root. Roots had greater water storage with lower biomechanical support, and shoots had biomechanically stronger and stiffer xylem with lower water storage. These findings support trade-offs among xylem functions between roots and shoots. Understanding how xylem functions differ throughout tree bodies is important in understanding whole-tree functioning and how terrestrial plants endure numerous environmental challenges over decades of growth.

Asunto(s)

RESUMEN

Bacteria transport through soil is a complex process particularly when the cells are released from solid manures and co-transported with particles. This study focuses on understanding of the Escherichia coli release from different particle fractions (0.25-, 0.5-, 1-, and 2-mm) of solid manure and evaluating different influent boundary conditions during cell release from manure and when a solid manure is applied to the soil. The 0.25-mm and 2-mm particle sizes resulted a greater cell release compared to 0.5-mm and 1-mm fractions (p < 0.05). The shape and magnitude of the cell release curves (CRCs) from the original manure bulk were mainly influenced by the two 0.25-mm and 2-mm fractions, respectively. The arithmetic mean for normalizing the CRCs and the time variable- based normalized CRCs for the manure-treated soil were the robust variables in evaluation of the experimental data. However, a single maximum bacteria concentration could provide the realistic dataset for the modeling process. Evaluation of the root-mean-squared-error and Akaike criterion showed that the two- and three-parametric models are recommended for simulating the cell release from solid manure in comparison with one parametric models. This study also suggests considering separate microbial release evaluations, with regards to influent concentration, for manure and manure-treated soils to propose best management practices for controlling bacteria pollution. Further research will reveal the key roles of different woody components and soluble material ratios for the various solid manures in bacteria release.

RESUMEN

BACKGROUND: There are currently no studies detailing cardiac troponin I (cTnI) release in normal horses post-exercise using an analytically validated assay. These data are essential for selecting appropriate sampling times in equine athletes with suspected myocardial injury. OBJECTIVE: To plot the magnitude and time course of cTnI release after maximal effort, using validated cTnI assays. STUDY DESIGN: Descriptive longitudinal study. METHODS: Five clinically normal Standardbred racehorses in race training were included in the study. Horses were exercised in harness at near-race intensity. Blood samples were taken immediately pre- and post-exercise and then hourly for 24 h. Samples were analysed using the validated high-sensitivity cTnI assay and a contemporary sensitivity cTnI assay. RESULTS: Mean resting cTnI was 1.33 ± 0.6 s.d. ng/L (range, 0.82-2.33 ng/L) using assay A. All horses were below the detection limit at rest using assay B. Peak elevation occurred 2-6 h post-exercise with both assays (mean, 4.6 ± 1.7 and 4.0 ± 2 h, respectively). Mean peak increase in cTnI was 11.96 ± 9.41 ng/L (range, 1.72-23.76 ng/L) using assay A. Peak concentrations were detectable in three of the horses using assay B and were between 0.039 and 0.051 µg/L (mean: 0.043 ± 0.006 µg/L). All horses returned to baseline within 24 h. MAIN LIMITATIONS: A small (n = 5) convenience sample was used as random sampling was not logistically possible. CONCLUSIONS: All horses experienced an increase in cTnI post-exercise, with peak occurring 2-6 h post-exercise. Cardiac troponin I elevation was detected earlier using the high-sensitivity assay, which may convey a diagnostic advantage. Targeted studies are needed to determine the significance of these increases.

Asunto(s)

RESUMEN

In diffusion governed by Fick's law, the diffusion coefficient represents the phenomenological material parameter and is, in general, a constant. In certain cases of diffusion through porous media, the diffusion coefficient can be variable (i.e. non-constant) due to the complex process of solute displacements within microstructure, since these displacements depend on porosity, internal microstructural geometry, size of the transported particles, chemical nature, and physical interactions between the diffusing substance and the microstructural surroundings. In order to provide a simple and general approach of determining the diffusion coefficient for diffusion through porous media, we have introduced mass release curves as the constitutive curves of diffusion. The mass release curve for a selected direction represents cumulative mass (per surface area) passed in that direction through a small reference volume, in terms of time. We have developed a methodology, based on numerical Finite Element (FE) and Molecular Dynamics (MD) methods, to determine simple mass release curves of solutes through complex media from which we calculate the diffusion coefficient. The diffusion models take into account interactions between solute particles and microstructural surfaces, as well as hydrophobicity (partitioning). We illustrate the effectiveness of our approach on several examples of complex composite media, including an imaging-based analysis of diffusion through pancreatic cancer tissue. The presented work offers an insight into the role of mass release curves in describing diffusion through porous media in general, and further in case of complex composite media such as biological tissue.

Asunto(s)

RESUMEN

OBJECTIVE:To investigate the quality of Diclofenac sodium sustained-release capsules testing in Shandong prov-ince in 2014,to provide the reference for improving the homogeneity and stability of product quality. METHODS:51 batches of Diclofenac sodium sustained-release capsules from 7 manufacturers(A,B,C,D,E,F,G)were tested by statutory inspection test in respects of property,identification,content uniformity,release rate,related substance,content determination,etc. The inspection results were analyzed statistically. The content of chromium in capsule shell and release curve of diclofenac sodium in dissolution mediums with different pH were explored and tested by literature method (compared by similarity factor f2 with sample from A). RESULTS:All items of samples were in line with the quality standard,but there was difference in the quality of samples among different manufacturers,such as the content ranged 92.4%-102.1%. In exploration test,the content of chromium was lower than the limit requirement,but the content of diclofenac sodium had great difference among different manufacturers and different batch-es. Compared with the sample from A manufacture,the f2 from B,C,D,E,F,G manufactures ranged 37-86. CONCLUSIONS:Di-clofenac sodium sustained-release capsules are superior in quality. But it is still suggested to strengthen quality study and control, and raise the standard for release rate test.

RESUMEN

The effect of process scale-up from 4 to 400-L high-shear granulator on the release kinetics of the active ingredient from pharmaceutical granules has been investigated. The dissolution and disintegration rates of the granules were measured simultaneously by the combination of UV/vis spectroscopy and static light scattering. The granule batches were found to consist of sub-populations with qualitatively different dissolution behavior: "weaker" granules that disintegrated during dissolution, and "stronger" granules that retained their size and from which the active ingredient was gradually leached. The existence of these sub-populations was attributed to non-uniform distribution of normal and shear forces that prevail in granulators of different size. This hypothesis was confirmed by preparing granules at increasing values of the Froude number at the 4-L scale, and observing a transition from the break-up dissolution mode to the leaching dissolution mode with increasing granule densification. The simultaneous observation of solute concentration and particle size distribution during granules dissolution proved to be a useful tool for the understanding of dissolution mechanisms and for identifying non-uniformities of process conditions that can occur during scale-up.

Asunto(s)