RESUMEN
The research on high-precision and all-scenario localization using the millimeter-wave (mmWave) band is of great urgency. Due to the characteristics of mmWave, blockages make the localization task more complex. This paper proposes a cooperative localization system among user equipment (UEs) assisted by reconfigurable intelligent surfaces (RISs), which considers device-to-device (D2D) communication. RISs are used as anchor points, and position estimation is achieved through signal exchanges between UEs. Firstly, we establish a localization model based on this system and derive the UEs' positioning error bound (PEB) as a performance metric. Then, a UE-RIS joint beamforming design is proposed to optimize channel state information (CSI) with the objective of achieving the minimum PEB. Finally, simulation analysis demonstrates the advantages of the proposed scheme over RIS-assisted base station positioning, achieving centimeter-level accuracy with a 10 dBm lower transmission power.
RESUMEN
Reconfigurable intelligent surfaces (RIS) offer the potential to customize the radio propagation environment for wireless networks, and will be a key element for 6G communications. However, due to the unique constraints in these systems, the optimization problems associated to RIS configuration are challenging to solve. This paper illustrates a new approach to the RIS configuration problem, based on the use of artificial intelligence (AI) and deep learning (DL) algorithms. Concretely, a custom convolutional neural network (CNN) intended for edge computing is presented, and implementations on different representative edge devices are compared, including the use of commercial AI-oriented devices and a field-programmable gate array (FPGA) platform. This FPGA option provides the best performance, with ×20 performance increase over the closest FP32, GPU-accelerated option, and almost ×3 performance advantage when compared with the INT8-quantized, TPU-accelerated implementation. More noticeably, this is achieved even when high-level synthesis (HLS) tools are used and no custom accelerators are developed. At the same time, the inherent reconfigurability of FPGAs opens a new field for their use as enabler hardware in RIS applications.
RESUMEN
This paper investigates joint beamforming in a secure integrated sensing and communications (ISAC) system assisted by reconfigurable intelligent surfaces (RIS). The system communicates with legitimate downlink users, detecting a potential target, which is a potential eavesdropper attempting to intercept the downlink communication information from the base station (BS) to legitimate users. To enhance the physical-layer secrecy of the system, we design and introduce interference signals at the BS to disrupt eavesdroppers' attempts to intercept legitimate communication information. The BS simultaneously transmits communication and interference signals, both utilized for communication and sensing to guarantee the sensing and communication quality. By jointly optimizing the BS active beamformer and the RIS passive beamforming matrix, we aim to maximize the achievable secrecy rate and radiation power of the system. We develop an effective scheme to find the active beamforming matrix through fractional programming (FP) and semi-definite programming (SDP) techniques and obtain the RIS phase shift matrix via a local search technique. Simulation results validate the effectiveness of the proposed methods in enhancing communication and sensing performance. Additionally, the results demonstrate the effectiveness of introducing the interference signals and RIS in enhancing the physical-layer secrecy of the ISAC system.
RESUMEN
In this paper, we propose a reconfigurable intelligent surface (RIS) that can dynamically switch the transmission and reflection phase of incident electromagnetic waves in real time to realize the dual-beam or quad-beam and convert the polarization of the transmitted beam. Such surfaces can redirect a wireless signal at will to establish robust connectivity when the designated line-of-sight channel is disturbed, thereby enhancing the performance of wireless communication systems by creating an intelligent radio environment. When integrated with a sensing element, they are integral to performing joint detection and communication functions in future wireless sensor networks. In this work, we first analyze the scattering performance of a reconfigurable unit element and then design a RIS. The dynamic field scattering manipulation capability of the RIS is validated by full-wave electromagnetic simulations to realize six different functions. The scattering characteristics of the proposed unit element, which incorporates two p-i-n diodes have been substantiated through practical implementation. This involved the construction of a simple prototype and the subsequent examination of its scattering properties via the free-space measurement method. The obtained transmission and reflection coefficients from the measurements are in agreement with the anticipated outcomes from simulations.
RESUMEN
In recent years, unmanned aerial vehicles (UAVs) have become a valuable platform for many applications, including communication networks. UAV-enabled wireless communication faces challenges in complex urban and dynamic environments. UAVs can suffer from power limitations and path losses caused by non-line-of-sight connections, which may hamper communication performance. To address these issues, reconfigurable intelligent surfaces (RIS) have been proposed as helpful technologies to enhance UAV communication networks. However, due to the high mobility of UAVs, complex channel environments, and dynamic RIS configurations, it is challenging to estimate the link quality of ground users. In this paper, we propose a link quality estimation model using a gated recurrent unit (GRU) to assess the link quality of ground users for a multi-user RIS-assisted UAV-enabled wireless communication system. Our proposed framework uses a time series of user channel data and RIS phase shift information to estimate the quality of the link for each ground user. The simulation results showed that the proposed GRU model can effectively and accurately estimate the link quality of ground users in the RIS-assisted UAV-enabled wireless communication network.
RESUMEN
Simultaneous transmitting and reflecting reconfigurable intelligent surfaces (STAR-RISs) can reflect signals and transmissive signals simultaneously and can extend the coverage of signals. A conventional RIS mainly focuses on the case where the signal source and the target are on the same side. In this paper, a STAR-RIS-assisted non-orthogonal multiple access (NOMA) downlink communication system is considered to maximize the achievable rate for users by jointly optimizing the power-allocation coefficients, active beamforming, and STAR-RIS beamforming under the mode-switching (MS) protocol. The critical information of the channel is first extracted using the Uniform Manifold Approximation and Projection (UMAP) method. Based on the key extracted channel features, STAR-RIS elements and users are clustered individually using the fuzzy C-mean clustering (FCM) method. The alternating optimization method decomposes the original optimization problem into three sub-optimization problems. Finally, the sub-problems are converted to unconstrained optimization methods using penalty functions for the solution. Simulation results show that when the number of elements of RIS is 60, the achievable rate of the STAR-RIS-NOMA system is about 18% higher than that of the RIS-NOMA system.
Asunto(s)
Prótesis de la Rodilla , Noma , Humanos , Análisis por Conglomerados , Simulación por Computador , InteligenciaRESUMEN
To increase constantly the achievable rate of reconfigurable intelligent surfaces (RISs)-assisted communication systems, the traditional approaches are to deploy a few active elements randomly on the passive RISs. However, the effect of the geometry distribution of the deployment of the active elements is ignored in performance analysis. In this article, three types of geometry distribution with active elements on RISs, denoted as random distribution, uniform distribution, and eight-queens distribution, are discussed to analyze the affect on achievable rate in RISs-assisted wireless communications. Specifically, the optimal achievable rate is obtained according to the predefined codebook, and the codebook is determined by the reflection beamforming codeword related to the active elements geometry distribution in RISs. Simulation results show that different geometry distribution of active elements in RISs causes different influences to achievable rates. The eight-queens distribution proposed in this article for active elements in RISs brings the highest achievable rate compared with random distribution and uniform distribution. In the passive RISs surface, the distribution of a few active elements is limited by the eight-queens, further enhancing the achievable rate of the wireless communication system. This method has a 7% improvement over the conventional method.
RESUMEN
Wireless communication has become an integral part of modern vehicles. However, securing the information exchanged between interconnected terminals poses a significant challenge. Effective security solutions should be computationally inexpensive, ultra-reliable, and capable of operating in any wireless propagation environment. Physical layer secret key generation has emerged as a promising technique, which leverages the inherent randomness of wireless-channel responses in amplitude and phase to generate high-entropy symmetric shared keys. The sensitivity of the channel-phase responses to the distance between network terminals makes this technique a viable solution for secure vehicular communication, given the dynamic behavior of these terminals. However, the practical implementation of this technique in vehicular communication is hindered by fluctuations in the communication link between line-of-sight (LoS) and non-line-of-sight (NLoS) conditions. This study introduces a key-generation approach that uses a reconfigurable intelligent surface (RIS) to secure message exchange in vehicular communication. The RIS improves the performance of key extraction in scenarios with low signal-to-noise ratios (SNRs) and NLoS conditions. Additionally, it enhances the network's security against denial-of-service (DoS) attacks. In this context, we propose an efficient RIS configuration optimization technique that reinforces the signals received from legitimate users and weakens the signals from potential adversaries. The effectiveness of the proposed scheme is evaluated through practical implementation using a 1-bit RIS with 64×64 elements and software-defined radios operating within the 5G frequency band. The results demonstrate improved key-extraction performance and increased resistance to DoS attacks. The hardware implementation of the proposed approach further validated its effectiveness in enhancing key-extraction performance in terms of the key generation and mismatch rates, while reducing the effect of the DoS attacks on the network.
RESUMEN
Reconfigurable intelligent surfaces (RIS) are considered of paramount importance to improve air-ground and THz communications performance for 6G systems. Recently, RISs were proposed in Physical Layer Security (PLS), as they can (i) improve the secrecy capacity due to the controlled directional reflections' capability of RIS elements and (ii) avoid potential eavesdroppers, redirecting data streams towards the intended users. This paper proposes the integration of a multi-RISs system within a Software Defined Networking (SDN) architecture to provide a specific control layer for secure data flows forwarding. The optimisation problem is properly characterised in terms of an objective function and an equivalent graph theory model is considered to address the optimal solution. Moreover, different heuristics are proposed, trading off complexity and PLS performance, to evaluate the more suitable multi-beam routing strategy. Numerical results are also provided, focusing on a worst case scenario which points out the improvement of the secrecy rate from the increase in the number of eavesdroppers. Furthermore, the security performance is investigated for a specific user mobility pattern in a pedestrian scenario.
RESUMEN
The goal of 6G is to make far-reaching changes in communication systems with stricter demands, such as high throughput, extremely low latency, stronger security, and ubiquitous connectivity. Several promising techniques, such as reconfigurable intelligent surfaces (RISs), have been introduced to achieve these goals. An RIS is a 2D low-cost array of reflecting elements that can adjust the electromagnetic properties of an incident signal. In this paper, we guarantee secrecy by using an irregular RIS (IRIS). The main idea of an IRIS is to irregularly activate reflecting elements for a given number of RIS elements. In this work, we consider a communication scenario in which, with the aid of an IRIS, a multi-antenna base station establishes a secure link with a legitimate single-antenna user in the presence of a single-antenna eavesdropper. To this end, we formulate a topology-and-precoding optimization problem to maximize the secrecy rate. We then propose a Tabu search-based algorithm to jointly optimize the RIS topology and the precoding design. Finally, we present simulation results to validate the proposed algorithm, which highlights the performance gain of the IRIS in improving secure transmissions compared to an RIS. Our results show that exploiting an IRIS can allow additional spatial diversity to be achieved, resulting in secrecy performance improvement and overcoming the limitations of conventional RIS-assisted systems (e.g., a large number of active elements).
RESUMEN
To assist sixth-generation wireless systems in the management of a wide variety of services, ranging from mission-critical services to safety-critical tasks, key physical layer technologies such as reconfigurable intelligent surfaces (RISs) are proposed. Even though RISs are already used in various scenarios to enable the implementation of smart radio environments, they still face challenges with regard to real-time operation. Specifically, high dimensional fully passive RISs typically need costly system overhead for channel estimation. This paper, however, investigates a semi-passive RIS that requires a very low number of active elements, wherein only two pilots are required per channel coherence time. While in its infant stage, the application of deep learning (DL) tools shows promise in enabling feasible solutions. We propose two low-training overhead and energy-efficient adversarial bandit-based schemes with outstanding performance gains when compared to DL-based reflection beamforming reference methods. The resulting deep learning models are discussed using state-of-the-art model quality prediction trends.
RESUMEN
Addressing the challenges of internet-based 5G technology, namely increasing density through micro-cell systems, frequency spectrum, and reducing resource costs, is needed to meet the use of IoT-based 6G technology with the goal of high-speed, high-capacity, and low-latency communication. In this research, we considered the coverage performance and ergodic capacity of the Reconfigurable Intelligent Surface (RIS)-aided cooperative nonorthogonal multiple-access network (NOMA) of an IoT system. This enables the upgrading of 5G- toward 6G-technology-based IoT systems. We developed a closest-form formula of near and far user coverage probabilities as a function of perfect channel statistical information (p-CSI) using only a single-input single-output (SISO) system with a finite number of RIS elements under the Nakagami-m fading channel. We also define ergodic capacity as a simple upper limit by simplifying the use of symbolic functions and it could be used for a sustained period. The simulation findings suggest that RIS-assisted NOMA has a reduced risk of outage than standard NOMA. All of the derived closed-form formulas agree with Monte Carlo simulations, indicating that the distant user's coverage probability outperforms the nearby user. The bigger the number of RIS parts, however, the greater the chance of coverage. They also disclose the scaling law of the number of phase shifts at the RIS-aided NOMA based on the asymptotic analysis and the upper bound on channel capacity. In both arbitrary and optimum phase shifts, the distant user's ergodic capacity outperforms the near user.
RESUMEN
The evolution of Internet of Things (IoT) networks has been studied owing to the associated benefits in useful applications. Although the evolution is highly helpful, the increasing day-to-day demands of mobile users have led to immense requirements for further performance improvements such as efficient spectrum utilization, massive device connectivity, and high data rates. Fortunately, reconfigurable intelligent surfaces (RIS) and non-orthogonal multiple access (NOMA) techniques have recently been introduced as two possible current-generation emerging technologies with immense potential of addressing the above-mentioned issues. In this paper, we propose the integration of RIS to the existing techniques (i.e., NOMA and relaying) to further enhance the performance for mobile users. We focus on a performance analysis of two-user group by exploiting two main performance metrics including outage probability and ergodic capacity. We provide closed-form expressions for both performance metrics to highlight how NOMA-aided RIS systems provide more benefits compared with the benchmark based on traditional orthogonal multiple access (OMA). Monte-Carlo simulations are performed to validate the correctness of obtained expressions. The simulations show that power allocation factors assigned to two users play a major role in the formation of a performance gap among two users rather than the setting of RIS. In particular, the strong user achieves optimal outage behavior when it is allocated 35% transmit power.
RESUMEN
Intelligent metasurfaces have gained significant importance in recent years due to their ability to dynamically manipulate electromagnetic (EM) waves. Their multifunctional characteristics, realized by incorporating active elements into the metasurface designs, have huge potential in numerous novel devices and exciting applications. In this article, recent progress in the field of intelligent metasurfaces are reviewed, focusing particularly on tuning mechanisms, hardware designs, and applications. Reconfigurable and programmable metasurfaces, classified as space gradient, time modulated, and space-time modulated metasurfaces, are discussed. Then, reconfigurable intelligent surfaces (RISs) that can alter their wireless environments, and are considered as a promising technology for sixth-generation communication networks, are explored. Next, the recent progress made in simultaneously transmitting and reflecting reconfigurable intelligent surfaces (STAR-RISs) that can achieve full-space EM wave control are summarized. Finally, the perspective on the challenges and future directions of intelligent metasurfaces are presented.