RESUMEN

The real-time and room-temperature detection of nitrogen dioxide (NO2) holds significant importance for environmental monitoring. However, the performance of NO2 sensors has been hampered by the trade-off between the high sensitivity and stability of conventional sensitive materials. Here, we present a novel fully flexible paper-based gas sensing structure by combining a homogeneous screen-printed titanium carbide (Ti3C2Tx) MXene-based nonmetallic electrode with a MoS2 quantum dots/Ti3C2Tx (MoS2 QDs/Ti3C2Tx) gas-sensing film. These precisely designed gas sensors demonstrate an improved response value (16.3% at 5 ppm) and a low theoretical detection limit of 12.1 ppb toward NO2, which exhibit a remarkable 3.5-fold increase in sensitivity compared to conventional Au interdigital electrodes. The outstanding performance can be attributed to the integration of the quantum confinement effect of MoS2 QDs and the conductivity of Ti3C2Tx, establishing the main active adsorption sites and enhanced charge transport pathways. Furthermore, an end-sealing effect strategy was applied to decorate the defect sites with naturally oxygen-rich tannic acid and conductive polymer, and the formed hydrogen bonding network at the interface effectively mitigated the oxidative degradation of the Ti3C2Tx-based gas sensors. The exceptional stability has been achieved with only a 1.8% decrease in response over 4 weeks. This work highlights the innovative design of high-performance gas sensing materials and homogeneous gas sensor techniques.

RESUMEN

Silicon in its nanoscale range offers a versatile scope in biomedical, photovoltaic, and solar cell applications. Due to its compatibility in integration with complex molecules owing to changes in charge density of as-fabricated Silicon Nanostructures (SiNSs) to realize label-free and real-time detection of certain biological and chemical species with certain biomolecules, it can be exploited as an indicator for ultra-sensitive and cost-effective biosensing applications in disease diagnosis. The morphological changes of SiNSs modified receptors (PNA, DNA, etc) have huge future scope in optimized sensitivity (due to conductance variations of SiNSs) of target biomolecules in health care applications. Further, due to the unique optical and electrical properties of SiNSs realized using the chemical etching technique, they can be used as an indicator for photovoltaic and solar cell applications. In this work, emphasis is given on different critical parameters that control the fabrication morphologies of SiNSs using metal-assisted chemical etching technique (MACE) and its corresponding fabrication mechanisms focusing on numerous applications in energy storage and health care domains. The evolution of MACE as a low-cost, easy process control, reproducibility, and convenient fabrication mechanism makes it a highly reliable-process friendly technique employed in photovoltaic, energy storage, and biomedical fields. Analysis of the experimental fabrication to obtain high aspect ratio SiNSs was carried out using iMAGEJ software to understand the role of surface-to-volume ratio in effective bacterial interfacing. Also, the role of silicon nanomaterials has been discussed as effective anti-bacterial surfaces due to the presence of silver investigated in the post-fabrication energy dispersive x-ray spectroscopy analysis using MACE.

Asunto(s)

RESUMEN

Amidst the rapid advancements in the fields of photovoltaics and optoelectronic devices, CsPbBr3 nanosheets (NSs) have emerged as a focal point of research due to their exceptional optical and electronic properties. This work explores the application potential of CsPbBr3 NSs in photonic and catalytic domains. Utilizing an optimized hot-injection method and a ZnBr2-assisted in situ passivation strategy, we successfully synthesized CsPbBr3 NSs with controlled dimensions and optical characteristics. Comprehensive characterization revealed that the nucleation environment and thickness significantly influenced the structure and optical performance of the materials. The results indicate that the optimized synthesis method enables control over the lateral dimensions of the nanoparticles, ranging from 9.1 ± 0.06 nm to 334.5 ± 4.40 nm, facilitating the tuning of the excitation wavelength from 460 nm (blue) to 510 nm (green). Further analyses involving photoresponse and electrochemical impedance spectroscopy demonstrated the substantial potential of these NSs in applications such as photocatalysis and energy conversion.

RESUMEN

In this study, we report theoretically the effect of well, barrier widths and polarization on optical properties of intersubband transitions (ISBT) in CdSe/MgSe asymmetric quantum wells (ADQWs). Eigenenergies and their corresponding wave functions have been calculated by solving numerically the Schrödinger equation. The second harmonic generation and the optical rectification including intersubband transition energies have been discussed. Obtained results revealed that intersubband transition depends strongly on the quantum wells and the barrier widths as well as the stark effect. With appropriate intensity, optical rectification can reach great magnitude. We hope that the numerical results of our research are valuable theoretically and experimentally to our scientific community in nonlinear optics.

RESUMEN

As a direct band gap semiconductor, perovskite has the advantages of high carrier mobility, long charge diffusion distance, high defect tolerance and low-cost solution preparation technology. Compared with traditional metal halide perovskites, which regulate energy band and luminescence by changing halogen, perovskite quantum dots (QDs) have a surface effect and quantum confinement effect. Based on the LaMer nucleation growth theory, we have synthesized CsPbBr3 QDs with high dimensional homogeneity by creating an environment rich in Br- ions based on the general thermal injection method. Moreover, the size of the quantum dots can be adjusted by simply changing the reaction temperature and the concentration of Br- ions in the system, and the blue emission of strongly confined pure CsPbBr3 perovskite is realized. Finally, optical and electrochemical tests suggested that the synthesized quantum dots have the potential to be used in the field of photocatalysis.

RESUMEN

3D perovskites with low energy disorder and high ambipolar charge mobility represent a promising solution for efficient and bright light-emitting diodes. However, the challenges of regulating the nanocrystal size to trigger the quantum confinement effect and control the surface trap states to reduce charge loss hinder the applications of 3D perovskites in blue perovskite light-emitting diodes (PeLEDs). In this study, we present a top-down exfoliation method to obtain blue 3D perovskite films with clipped nanocrystals and tunable bandgaps by employing methyl cyanide (MeCN) for post-treatment. In this method, the MeCN solvent exfoliates the surface components of the 3D perovskite grains through a partial dissolution process. Moreover, the dissolved precursor can be further utilized to construct an ingenious 2D/3D heterostructure by incorporating an organic spacer into the MeCN solvent, contributing to efficient defect passivation and improved energy transfer. Consequently, efficient PeLEDs featuring ultrapure blue emission at 478 nm achieve a record external quantum efficiency of 12.3% among their 3D counterparts. This work emphasizes the significance of inducing the quantum confinement effect in 3D perovskites for efficient blue PeLEDs and provides a viable scheme for the in situ regulation of perovskite crystals.

RESUMEN

Thin films of rare-earth monopnictide (RE-V) semimetals are expected to turn into semiconductors due to quantum confinement effects (QCE), lifting the overlap between electron pockets at Brillouin zone edges (X) and hole pockets at the zone center (Γ). Instead, using LaSb as an example, we find the emergence of the quantum spin Hall (QSH) insulator phase in (001)-oriented films as the thickness is reduced to 7, 5, or 3 monolayers (MLs). This is attributed to a strong QCE on the in-plane electron pockets and the lack of quantum confinement on the out-of-plane pocket projected onto the zone center, resulting in a band inversion. Spin-orbit coupling (SOC) opens a sizable nontrivial gap in the band structure of ultrathin films. Such effect is anticipated to be general in rare-earth monopnictides and may lead to interesting phenomena when coupled with the 4f magnetic moments present in other members of this family of materials.

RESUMEN

Based on the widely used wet metal-assisted electroless etching, we develop in this work a novel vapor-phase silver-assisted chemical etching (VP-Ag-ACE) suitable for the elaboration of highly doped p-silicon (Si) nanostructures with strong, visible, and multi-peak photoluminescence (PL) emissions. The lateral and vertical etching rates (LER and VER) were discussed based on the etching mechanism of the VP-Ag-ACE. The antireflective suitability of the vapor-etched layer has been evaluated by a reflectivity measurement and exhibits reflectivity values lower than 3%. The PL emission at both room and low temperatures emissions were deeply discussed and correlated with the structural properties of the Si morphologies and their surface states based on the FTIR results.

RESUMEN

Simultaneously manipulating the nanostructure and band structure of semiconductors for boosting the photocatalytic performance of photocatalyts is highly desirable. Herein, a series of hierarchical sponge-like S-doped poly(heptazine imide) (HS-SPHI) assembled by ultrathin nanosheets were successfully fabricated via a facile bottom-up supramolecular preassembly approach using melamine (MA) and trithiocyanuric acid (TTCA) as precursors. Benefiting from the synergistic effect of the S-doping and their unique hierarchical porous structure coupled with quantum confinement effect, the as-obtained HS-SPHIs are endowed with extended visible-light response, improved charge separation efficiency, enlarged specific surface area, and enhanced thermodynamic driving force for water reduction. As a result, all the HS-SPHIs exhibit remarkable boosting visible-light (>420 nm) photocatalytic H2evolution (PHE). The maximum PHE rate achieved by HS-SPHI-650 can be up to 3584.2 µmol g-1h-1, with an apparent quantum efficiency (AQE) of 14.67 % at 420 nm, which is about 22.4 times than that of pristine bulk g-C3N4 (B-GCN). We believe that this work will provide a significant strategy for optimizing the band structure of PCN in order to improve its photocatalytic performance.

RESUMEN

Due to the intrinsic layered structure, graphdiyne (GDY) strongly tends to form 2D materials, therefore, most of the current research are based on GDY 2D structures. Up to now, the synthesis of its ultrathin nanowires with a high aspect ratio has not been reported. Here, the ultrathin GDY nanowires with diameters below 3 nm are reported for the first time by a two-phase interface synthesis method, which has excellent crystallinity and an aspect ratio of more than 2500. Evidence shows that the GDY ultrathin nanowires are formed by the oriented-attachment mechanism of nanoparticles. The GDY ultrathin nanowires exhibit a significant quantum confinement effect, enhanced photoelectric effect, and promising applications in surface-enhanced Raman sensing.

RESUMEN

Quantum dots (QDs) have an unparalleled ability to mimic true colors due to their size-tunable optical and electronic properties, which make them the most promising nanoparticles in various fields. Currently, the majority of QDs available in the market are cadmium, indium, and lead-based materials but the toxicity and unstable nature of these QDs restricts their industrial and practical applications. To avoid using heavy metal ions, especially cadmium, the current research is focused on the fabrication of perovskite and vanadate QDs. Herein, we report the facile synthesis of a novel and cost-effective CsVO3 QDs for the first time. The sizes of the CsVO3 QDs produced were tuned from 2 to 10 nm by varying the reaction temperature from 140 to 190 °C. On increasing QD size, a continuous red shift was observed in absorption and emission spectra, signifying the presence of quantum confinement. In addition, along with CsVO3 QDs, the CsVO3 nanosheets self-assembled microflower-like particles were found as residue after the centrifugation; the X-ray diffraction indicated an orthorhombic structure. Under 365 nm excitation, these CsVO3 microflower-like particles exhibited broad emission with CIE coordinates in the white emission region. The acquired results suggest that CsVO3 QDs may represent a new class of cadmium-free materials for optoelectronic and biomedical applications.

RESUMEN

Semiconductor nanoparticles and nanocrystals have a great impact due to its contribution in the diverse fields including electronics, solar energy, biological imaging, and photonics. Among these semiconductor nanoparticles, cadmium selenide of II-VI group binary semiconductor nanoparticles were synthesized using solvothermal process for the different reaction temperatures. The XRD pattern of the synthesized samples confirms the crystalline nature of the samples and showed increase in its crystallite size with rise in temperature. The morphology of the samples was analysed with TEM images and found that the nanoparticles synthesized at different temperatures were varied in size and shape indicating the increase in the size of the particles with the raise in temperature. The optical properties of the samples pointed out that they exhibit a blue shift owing to quantum confinement. Photocatalytic activity was carried out for the synthesized samples under visible light radiation using methylene blue (MB) as a model pollutant and it proved to be a good photocatalyst achieving the efficiency of 75% which is promising for future application with good optimization. The efficiency could be increased when these semiconductor CdSe nanoparticles are doped with metal particles due to an increase in the absorption edge wavelength and a decrease in bandgap energy were reported in detail.

Asunto(s)

RESUMEN

The optical properties of silicon nanowire arrays (SiNWs) are closely related to surface morphology due to quantum effects and quantum confinement effects of the existing semiconductor nanocrystal. In order to explore the influence of the diameters and distribution density of nanowires on the light absorption in the visible to near infrared band, we report the highly efficient method of multiple replication of versatile homogeneous Au films from porous anodic aluminum oxide (AAO) membranes by ion sputtering as etching catalysts; the monocrystalline silicon is etched along the growth templates in a fixed proportion chemical solution to form homogeneous ordered arrays of different morphology and distributions on the surface. In this system, we demonstrate that the synthesized nanostructure arrays can be tuned to exhibit different optical characteristics in the test wavelength range by adjusting the structural parameters of AAO membranes.

RESUMEN

Quantum confinement (QC) effect-related materials have been extensively studied as photoluminescent probes for agricultural, food, and environmental analyses, with the advantage of simple-to-synthesize, reusable, nontoxic, and environmentally friendly. Herein, we propose a strategy to dimerize aromatic cyclo-dipeptides, namely cyclo-ditryptophan (cyclo-WW), cyclo-diphenylalanine (cyclo-FF), and cyclo-dihistidine (cyclo-HH), into quantum dots as basic building blocks for the self-assembly of QC supramolecular structures with excellent photoluminescent properties in aqueous solutions. In particular, through coordination with Zn(II), the bandgap can be tuned to change the photo-absorption and luminescence properties of the cyclo-dipeptide-based QC assemblies. The fluorescence quantum yield of cyclo-WW+Zn(II) was 16.9%. Such a good luminous effect makes it applicable to the detection of LC. A good linear relationship between fluorescence response of cyclo-WW+Zn(II) and LC concentration was observed in the range of 5-350 µg/L, with a low limit of detection of 2.9 µg/L and good spiked recovery of 90.72%-104.3%. A visual platform using the cyclo-WW+Zn(II)-based photoluminescent hydrogel and smartphone-assisted sample-to-answer analyzer were developed, which showed good responsiveness to LC. The developed fluorescence method, validated using traditional HPLC, is a biocompatible alternative for the rapid detection of trace pollutants with the advantages of portability and simple operation.

Asunto(s)

RESUMEN

Germanium, the prime applied semiconductor, is widely used in solid-state electronics and photoelectronics. Unfortunately, since the 3D diamond-like structure with strong covalent bonds impedes the 2D anisotropic growth, only the examples of ultrathin Ge along the (111) plane have been investigated, much less to the controllable synthesis along another crystal surface. Meanwhile, Ge(111) flakes are limited in semiconductor applications because of their gapless property. Here, ultrathin Ge(110) single crystal is synthesized with semiconductive property via gallium-associated self-limiting growth. The obtained ultrathin Ge(110) single crystal exhibits anisotropic honeycomb structure, uniformly incremental lattice, wide tunable direct-bandgap, blue-shifted photoluminescence emission, and unique phonon modes, which are consistent with the previous theoretical predictions. It also confirms excellent second harmonic generation and high hole mobility of 724 cm2 V-1 s-1 . The realization of ultrathin Ge(110) single crystal will provide an excellent candidate for application in electronics and optoelectronics.

RESUMEN

In this study, ultrafine nickel oxide nanoparticles (NiO NPs) were well synthesized using a simple wet chemical method under low temperature, 300 °C. An Ni(OH)2 precursor was well precipitated by dropping NH4OH into an Ni(Ac)2 solution. TG-DTA showed that the weight of the precipitate decreases until 300 °C; therefore, the precursor was heat-treated at 300 °C. X-ray diffraction (XRD) patterns indicated that hexagonal-structured NiO NPs with (200) preferred orientation was synthesized. In addition, BET specific surface area (SSA) and HRTEM analyses revealed that spherical NiO NPs were formed with SSA and particle size of 60.14 m2/g and ca. 5-15 nm by using the low temperature method. FT-IR spectra of the NiO NPs showed only a sharp vibrating absorption peak at around 550 cm-1 owing to the Ni-O bond. Additionally, in UV-vis absorption spectra, the wavelength for absorption edge and energy band gap of the ultrafine NiO NPs was 290 nm and 3.44 eV.

RESUMEN

2D layered organic-inorganic perovskites have attracted substantial attention due to their high stability and promising optoelectronic properties. However, in-depth insights on the anisotropic carrier transport properties of these 2D perovskites are remaining challenging, while they are significant for further designing the high-performance device applications. Here, the carrier transport properties within 2D perovskite single crystals are investigated and a layered-carrier-transport model is developed through the non-invasive and non-destructive surface-enhanced Raman scattering techniques. The carrier transport features of 2D perovskites show clearly the thickness-, applied voltage- and anisotropy-dependent behaviors, which are demonstrated to origin from the quantum confinement effect. The findings elucidate the carrier transport mechanisms within 2D perovskites from their molecular level through Raman spectroscopy, thus providing a promising way for exploring the photo-physical properties in wide-ranged halide perovskites and designing highly efficient perovskite optoelectronic devices.

RESUMEN

Carbon-based nanostructures with nanometer dimensions have been identified as potential photoluminescence probes for bioimaging due to their biocompatibility, tunable bandgap, and resistance to photobleaching. However, the influence of structural features of carbon quantum dots (CQDs) and graphene quantum dots (GQDs) in bioimaging has not been explored previously. In the present investigation, we elucidated the mechanism of higher PL in GQDs as compared to CQDs as a function of their structural features. TEM and AFM studies revealed that CQDs were spherical (size ~5 nm), while GQDs showed zigzag edges (size ~3 nm). Further, XRD and NMR studies confirmed that CQDs and GQDs show amorphous and crystalline structures with greater sp2 clusters, respectively. While both the QDs demonstrated multicolor fluorescence against variable excitations with similar lifetime, GQDs showed 7-fold higher QY than CQDs. Bioimaging studies in 2D cell culture, 3D tumoroids, and in vivo suggested a greater intensity of fluorescence in GQDs than CQDs. Additionally, rapid cell internalization was observed in GQDs owing to their positive surface potential by heterogeneous atomic (N and S) doping. Moreover, both CQDs and GQDs have demonstrated better time dependent stability for fluorescence properties. Taken together, the proposed mechanism elucidates the greater PL intensity in GQDs due to quantum confinement effect, crystallinity, and surface edge effects and is a better candidate for bioimaging amongst the carbon family.

Asunto(s)

RESUMEN

This review describes the use of nanocrystal-based photocatalysts as quantum photoinitiators, including semiconductor nanocrystals (e.g., metal oxides, metal sulfides, quantum dots), carbon dots, graphene-based nanohybrids, plasmonic nanocomposites with organic photoinitiators, and tunable upconverting nanocomposites. The optoelectronic properties, cross-linking behavior, and mechanism of action of quantum photoinitiators are considered. The challenges and prospects associated with the use of quantum photoinitiators for processes such as radical polymerization, reversible deactivation radical polymerization, and photoinduced atom transfer radical polymerization are reviewed. Due to their unique capabilities, we forsee a growing role for quantum photoinitiators over the coming years.

RESUMEN

A systematic analysis of the electronic, thermoelectric and optical properties of triclinic van der Waal's solids NbX2Y2(X = S, Se and Y = Cl, Br, I) is carried out within the framework of density functional theory for bulk and monolayer. The investigated compounds are semiconductors in bulk and monolayer, with band gap values ranging from 1.1 to 1.8 eV. We observed huge anisotropy in the electrical conductivity with the in-plane conductivity being 40 times higher than out-of-plane conductivity in NbS2I2. The observed high power factor and low thermal conductivity in NbX2Y2render these compounds as potential thermoelectric materials. In addition, the calculated optical properties such as refractive index and absorption coefficient reveal the optical anisotropy. We have calculated birefringence for all the studied compounds and a large value of 0.313 is observed for NbSe2I2. The monolayer electronic properties indicate the presence of anomalous quantum confinement. The giant birefringence along with promosing monolayer properties are the highlights of present work which might fetch future device applications in both bulk as well as monolayer.