RESUMEN

The properties of nanoconfined fluids are important for a broad range of natural and engineering systems. In particular, wetting/dewetting of hydrophobic nanoporous materials is crucial due to their broad applicability for molecular separation and liquid purification; energy storage, conversion, recuperation, and dissipation; for catalysis, chromatography, and so on. In this work, a rapid, orchestrated, and spontaneous dipole reorientation was observed in hydrophobic nanotubes of various pore sizes d (7.9-16.5 Å) via simulations. This phenomenon leads to the fragmentation of water clusters in the narrow nanopores (d = 7.9, 10 Å) and strongly affects dewetting through cluster repulsion. The cavitation in these pores has an electrostatic origin. The dependence of hydrogen-bonded network properties on the tube aperture is obtained and is used to explain wetting (intrusion)-dewetting (extrusion) hysteresis. Computer simulations and experimental data demonstrate that d equals ca. 12.5 Å is a threshold between a nonhysteretic (spring) behavior, where intrusion-extrusion is reversible, and a hysteretic one (shock absorber), where hysteresis is prominent. This work suggests that water clustering and the electrostatic nature of cavitation are important factors that can be effectively exploited for controlling the wetting/dewetting of nanoporous materials.

RESUMEN

Establishing molecular mechanisms of wetting and drying of hydrophobic porous materials is a general problem for science and technology within the subcategories of the theory of liquids, chromatography, nanofluidics, energy storage, recuperation, and dissipation. In this article, we demonstrate a new way to tackle this problem by exploring the effect of the topology of pure silica nanoparticles, nanotubes, and zeolites. Using molecular dynamics simulations, we show how secondary porosity promotes the intrusion of water into micropores and affects the hydrophobicity of materials. It is demonstrated herein that for nano-objects, the hydrophobicity can be controlled by changing the ratio of open to closed nanometer-sized lateral pores. This effect can be exploited to produce new materials for practical applications when the hydrophobicity needs to be regulated without significantly changing the chemistry or structure of the materials. Based on these simulations and theoretical considerations, for pure silica zeolites, we examined and then classified the experimental database of intrusion pressures, thus leading to the prediction of any zeolite's intrusion pressure. We show a correlation between the intrusion pressure and the ratio of the accessible pore surface area to total pore volume. The correlation is valid for some zeolites and mesoporous materials. It can facilitate choosing prospective candidates for further investigation and possible exploitation, especially for energy storage, recuperation, and dissipation.

RESUMEN

Thin pure-silica chabazite (Si-CHA) membranes have been synthesized by using a secondary growth method on a porous silica substrate. A CO2 permeance of 2.62 × 10-6 mol m-2 s-1 Pa-1 with a CO2/CH4 permeance ratio of 62 was obtained through a Si-CHA membrane crystallized for 8 h using a parent gel of H2O/SiO2 ratio of 4.6. The CO2 permeance through the Si-CHA membrane on a porous silica substrate was twice as high as that through the membrane synthesized on a porous alumina substrate, which displayed a similar zeolite layer thickness.

RESUMEN

The preparation of continuous layers of highly hydrophobic pure silica ITQ-29 zeolite, potentially applicable as hydrophobic membranes for separation of molecules based on their polarity, has been investigated. Continuous layers of intergrown ITQ-29 zeolite crystals were successfully grown on porous alumina supports by optimization of the synthesis conditions, such as the appropriate selection of the seeds, the procedure for the gel preparation, and the calcination conditions. This resulted in the formation of all silica ITQ-29 zeolite layers without the presence of germanium required in previously reported ITQ-29 membranes, with the subsequent improvement in quality and stability, as verified by the absence of cracks after calcination. We have proved that the incorporation of aluminum from the support into the zeolite layer does not occur, neither during the secondary growth nor through migration of aluminum species during calcination.

Asunto(s)

RESUMEN

An overview of all the studies on high-pressure intrusion-extrusion of LiCl aqueous solutions in hydrophobic pure silica zeolites (zeosils) for absorption and storage of mechanical energy is presented. Operational principles of heterogeneous lyophobic systems and their possible applications in the domains of mechanical energy storage, absorption, and generation are described. The intrusion of LiCl aqueous solutions instead of water allows to considerably increase energetic performance of zeosil-based systems by a strong rise of intrusion pressure. The intrusion pressure increases with the salt concentration and depends considerably on zeosil framework. In the case of channel-type zeosils, it rises with the decrease of pore opening diameter, whereas for cage-type ones, no clear trend is observed. A relative increase of intrusion pressure in comparison with water is particularly strong for the zeosils with narrow pore openings. The use of highly concentrated LiCl aqueous solutions instead of water can lead to a change of system behavior. This effect seems to be related to a lower formation of silanol defects under intrusion of solvated ions and a weaker interaction of the ions with silanol groups of zeosil framework. The influence of zeosil nanostructure on LiCl aqueous solutions intrusion-extrusion is also discussed.

Asunto(s)