RESUMEN

In this work, a novel type of fluorine-lean proton exchange membranes is presented, using sulfonamide-sulfonimide functional groups for ion conduction. These groups are constructed on a polystyrene backbone for simple and cost-efficient usage as well as rapid scalability. The polymer is further tailored by adjusting the sulfonamide functionality with various end-groups, namely pentafluorophenyl, 4-fluorophenyl, butyl and octyl groups. These groups affect the pKa, leading to pKa values of 5.7 for the pentafluorophenyl substitution and pKa 10.5 for the alkyl chain. The glass transition temperature of the sulfonamide homopolymers can be reduced from Tg = 151°C (Pentafluorophenyl) to 49°C (Octyl), making the ionomer more flexible at room temperature. The combination of the non-swelling sulfonamide further mitigates the high water uptake of the sulfonimide while maintaining the nominal ion exchange capacity. This combination leads to extremely high proton conductivities with up to σ = 283 mS cm-1 at room temperature, which is clearly outperforming Nafion and approaches values for acid doped systems. This approach can pave the way to a novel type of ion conducting class in proton exchange membrane fuel cells.

RESUMEN

A series of membrane materials suitable for high-temperature proton exchange membranes (HT-PEM) were successfully prepared by introducing polymeric ionic liquids (PILs) containing quaternary ammonium groups into ether-bonded polybenzimidazole (OPBI). The structure of the cross-linked membrane has a strong interaction with phosphoric acid (PA), which enhances proton transport and PA retention. To ensure better overall performance of the cross-linked membrane, the optimal PIL content is 30 wt% (OPBI-PIL-30 %). The PA uptake of OPBI-PIL-30 % membrane was 323.24 %, and the proton conductivity at 180 â„ƒ was 113.94 mS cm-1, which was much higher than that of OPBI membrane. It is noteworthy that the PA retention of OPBI-PIL-30 % membrane could reach 71.38 % after 240 h of testing under the harsh environment of 80 â„ƒ/40 % RH. The membrane showed better acid retention capacity of 86.89 % at 160 â„ƒ under anhydrous environment. The OPBI-PIL-20 % membrane achieved the maximum power density of 436.19 mW cm-2, attributed to its favorable mechanical characteristics and proton conductivity. By these excellent properties, it is shown that OPBI-PIL-X membranes containing quaternary ammonium groups have the potential to be applied in high temperature proton exchange membrane fuel cells (HT-PEMFCs).

RESUMEN

A new paradigm for energy is underway demanding decarbonized energy systems. Some of them rely on emerging electrochemical devices, crucial in hydrogen technologies, including fuel cells, CO2 and water electrolysers, whose applications and performances depend on key components such as their separators/ion-exchange membranes. The most studied and already commercialized Nafion membrane shows great chemical stability, but its water content limits its high proton conduction to a limited range of operating temperatures. Here, we report the synthesis of a new series of triazinephosphonate derivatives and their use as dopants in the preparation of new modified Nafion membranes. The triazinephosphonate derivatives were prepared by substitution of chlorine atoms in cyanuric chloride. Diverse conditions were used to obtain the trisubstituted (4-hydroxyphenyl)triazinephosphonate derivatives and the (4-aminophenyl)triazinephosphonate derivatives, but with these amino counterparts, only the disubstituted compounds were obtained. The new modified Nafion membranes were prepared by casting incorporation of the synthesized 1,3,5-triazinephosphonate (TPs) derivatives. The evaluation of the proton conduction properties of the new membranes and relative humidity (RH) conditions and at 60 °C, showed that they present higher proton conductivities than the prepared Nafion membrane and similar or better proton conductivities than commercial Nafion N115, in the same experimental conditions. The Nafion-doped membrane with compound TP2 with a 1.0 wt % loading showed the highest proton conductivity with 84 mS·cm-1.

RESUMEN

Proton exchange membranes with high ionic conductivity and good chemical stability are critical for achieving high power density and long lifespan of direct methanol cells (DMFCs). Herein, a zwitterionic molecule was grafted onto the surface of polyvinylidene fluoride (PVDF) nanofibers to obtain functionalized PVDF porous substrate (SBMA-PDA@PVDF). Then, sulfonated poly(ether ether ketone) (SPEEK) was filled into the pores of SBMA-PDA@PVDF, and further ionic cross-linked via H2SO4 to prepare the composite membrane (SBMA-PDA@PVDF/SPEEK). The basic groups on the zwitterionic interface could not only establish ionic cross-linking with SPEEK to increase chemical stability and reduce swelling, but also serve as the adsorption sites for subsequent H2SO4 cross-linking to significantly enhance proton conductivity. Super-high proton conductivity (165.34 mS cm-1, 80 °C) was achieved for the membrane, which was 2.12 times higher than that of the pure SPEEK. Moreover, the SBMA-PDA@PVDF/SPEEK membrane exhibited remarkably improved oxidative stability of 91.6 % mass retention after soaking in Fenton's agent for 12 h, while pure SPEEK completely decomposed. Satisfactorily, the DMFC assembled with SBMA-PDA@PVDF/SPEEK exhibited a peak power density of 99.01 mW cm-2, which was twice as much as that of commercial Nafion 212 (48.88 mW cm-2). After 235 h durability test, only 11 % voltage loss was observed.

RESUMEN

Fluoroalkyl-grafted polyoxometalate nanoclusters are used as supramolecular additives to precisely modify the ionic domains of Nafion, which can increase the proton conductivity and selectivity simultaneously. The resulting hybrid membranes show significantly enhanced power density in fuel cells and improved energy efficiency in vanadium flow batteries.

RESUMEN

As the key component of various energy storage and conversion devices, proton exchange membranes (PEMs) have been attracting significant interest. However, their further development is limited by the high cost of perfluorosulfonic acid polymers and the poor stability of acid-dopped non-fluorinated polymers. Recently, a new group of PEMs has been developed by hybridizing polyoxometalates (POMs), a group of super acidic sub-nanoscale metal oxide clusters, with polymers. POMs can serve simultaneously as both proton sponges and stabilizing agents, and their complexation with polymers can further improve polymers' mechanical performance and processability. Enormous efforts have been focused on studying supramolecular complexation or covalent grafting of POMs with various polymers to optimize PEMs in terms of cost, mechanical properties and stabilities. This concept summarizes recent advances in this emerging field and outlines the design strategies and application perspectives employed for using POM-polymer hybrid materials as PEMs.

RESUMEN

To ensure the long-term performance of proton-exchange membrane fuel cells (PEMFCs), proton-exchange membranes (PEMs) have stringent requirements at high temperatures and humidities, as they may lose proton carriers. This issue poses a serious challenge to maintaining their proton conductivity and mechanical performance throughout their service life. Ionogels are ionic liquids (ILs) hybridized with another component (such as organic, inorganic, or organic-inorganic hybrid skeleton). This design is used to maintain the desirable properties of ILs (negligible vapor pressure, thermal stability, and non-flammability), as well as a high ionic conductivity and wide electrochemical stability window with low outflow. Ionogels have opened new routes for designing solid-electrolyte membranes, especially PEMs. This paper reviews recent research progress of ionogels in proton-exchange membranes, focusing on their electrochemical properties and proton transport mechanisms.

RESUMEN

Successive proton conduction channels are constructed with the spin coating method in flexible proton exchange membranes (PEMs). In this research, phosphoric acid (PA) molecules are immobilized in the multilayered microstructure of Kevlar nanofibers and polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene (SEBS) polymer molecular chains. As a result, successive proton conduction channels can accelerate the proton conduction process in the prepared membrane with the multilayered microstructure. Additionally, the microstructure fractures of the composite membranes from the external force of folding and stretching operations are modified by the inner PA molecules. Notably, numerous PA molecules are further combined through formed intermolecular hydrogen bonding. The stretched membrane absorbs more PA molecules owing to the arrangement of PA molecules, Kevlar nanofibers, and SEBS molecular chains. The stretched membrane thus exhibits the enhanced proton conduction ability, such as the through-plane proton conductivity of 1.81 × 10-1 S cm-1 at 160 °C and that of 4.53 × 10-2 S cm-1 at 120 °C lasting for 600 h. Furthermore, the tensile stress of PA-doped stretched membranes reaches (3.91 ± 0.40)-(6.15 ± 0.43) MPa. A single proton exchange membrane fuel cell exhibits a peak power density of 483.3 mW cm-2 at 120 °C.

RESUMEN

Fluorinated proton-exchange membranes (PEMs) based on graft copolymers of dehydrofluorinated polyvinylidene fluoride (D-PVDF), 3-sulfopropyl acrylate (SPA), and 1H, 1H, 2H-perfluoro-1-hexene (PFH) were prepared via free radical copolymerization and characterized for fuel cell application. The membrane morphology and physical properties were studied via small-(SAXS) and wide-angle X-ray scattering (WAXS), SEM, and DSC. It was found that the crystallinity degree is 17% for PEM-RCF (co-polymer with SPA) and 16% for PEM-RCF-2 (copolymer with SPA and PFH). The designed membranes possess crystallite grains of 5-6 nm in diameter. SEM images reveal a structure with open pores on the surface of diameters from 20 to 140 nm. Their transport and electrochemical characterization shows that the lowest membrane area resistance (0.9 Ωcm2) is comparable to perfluorosulfonic acid PEMs (such as Nafion®) and polyvinylidene fluoride (PVDF) based CJMC cation-exchange membranes (ChemJoy Polymer Materials, China). Key transport and physicochemical properties of new and commercial membranes were compared. The PEM-RCF permeability to NaCl diffusion is rather high, which is due to a relatively low concentration of fixed sulfonate groups. Voltammetry confers that the electrochemical behavior of new PEM correlates to that of commercial cation-exchange membranes, while the ionic conductivity reveals an impact of the extended pores, as in track-etched membranes.

Asunto(s)

RESUMEN

Although proton exchange membrane water electrolyzers (PEMWE) are considered as a promising technique for green hydrogen production, it remains crucial to develop intrinsically effective oxygen evolution reaction (OER) electrocatalysts with high activity and durability. Here, a flexible self-supporting electrode with nanoporous Ir/Ta2O5 electroactive surface is reported for acidic OER via dealloying IrTaCoB metallic glass ribbons. The catalyst exhibits excellent electrocatalytic OER performance with an overpotential of 218 mV for a current density of 10 mA cm-2 and a small Tafel slope of 46.1 mV dec-1 in acidic media, superior to most electrocatalysts. More impressively, the assembled PEMWE with nanoporous Ir/Ta2 O5 as an anode shows exceptional performance of electrocatalytic hydrogen production and can operate steadily for 260 h at 100 mA cm-2 . In situ spectroscopy characterizations and density functional theory calculations reveal that the modest adsorption of OOH* intermediates to active Ir sites lower the OER energy barrier, while the electron donation behavior of Ta2 O5 to stabilize the high-valence states of Ir during the OER process extended catalyst's durability.

RESUMEN

The properties of proton conductors determine the operating temperature range of fuel cells. Typically, phosphoric acid (PA) proton conductors exhibit excellent proton conductivity owing to their high proton dissociation and self-diffusion abilities. However, at low temperatures or high current densities, water-induced PA loss causes rapid degradation of cell performance. Maintaining efficient and stable proton conductivity within a flexible temperature range can significantly reduce the start-up temperature of PA-doped proton exchange membrane fuel cells. In this study, a dual-proton conductor composed of an organic phosphonic acid (ethylenediamine tetramethylene phosphonic acid, EDTMPA) and an inorganic PA is developed for proton exchange membranes. The proposed dual-proton conductor can operate within a flexible temperature range of 80-160 °C, benefiting from the strong interaction between EDTMPA and PA, and the enhanced proton dissociation. Fuel cells with the EDTMPA-PA dual-proton conductor showed excellent cell stability at 80 °C. In particular, under the high current density of 1.5 A cm-2 at 160 °C, the voltage decay rate of the fuel cell with the dual-proton conductor is one-thousandth of that of the fuel cell with PA-only proton conductor, indicating excellent stability.

RESUMEN

Hydrogen energy as the next-generation clean energy carrier has attracted the attention of both academic and industrial fields. A key limit in the current stage is the operation temperature of hydrogen fuel cells, which lies in the slow development of high-temperature and high-efficiency proton exchange membranes. Currently, much research effort has been devoted to this field, and very innovative material systems have been developed. The authors think it is the right time to make a short summary of the high-temperature proton exchange membranes (HT-PEMs), the fundamentals, and developments, which can help the researchers to clearly and efficiently gain the key information. In this paper, the development of key materials and optimization strategies, the degradation mechanism and possible solutions, and the most common morphology characterization techniques as well as correlations between morphology and overall properties have been systematically summarized.

RESUMEN

Proton exchange membranes with high proton conductivity and low crossover of fuel molecules are required to realize advanced fuel-cell technology. The selective transportation of protons, which occurs by blocking the transportation of fuel molecules across a proton exchange membrane, is crucial to suppress crossover while maintaining a high proton conductivity. In this study, a simple yet powerful method is proposed for optimizing the crossover-conductivity relationship by pasting sulfanilic-functionalized holey graphenes onto a Nafion membrane. The results show that the sulfanilic-functionalized holey graphenes supported by the membrane suppresses the crossover by 89% in methanol and 80% in formate compared with that in the self-assembled Nafion membrane; an ≈60% reduction is observed in the proton conductivity. This method exhibits the potential for application in advanced fuel cells that use methanol and formic acid as chemical fuels to achieve high energy efficiency.

RESUMEN

Blend proton exchange membranes (BPEMs) were prepared by blending sulfonated poly(aryl ether nitrile) (SPAEN) with phosphorylated poly(vinylbenzyl chloride) (PPVBC) and named as SPM-x%, where x refers to the proportion of PPVBC to the weight of SPAEN. The chemical complexation interaction between the phosphoric acid and sulfonic acid groups in the PPVBC-SPAEN system resulted in BPEMs with reduced water uptake and enhanced mechanical properties compared to SPAEN proton exchange membranes. Furthermore, the flame retardancy of the PPVBC improved the thermal stability of the BPEMs. Despite a decrease in ion exchange capacity, the proton conductivity of the BPEMs in the through-plane direction was significantly enhanced due to the introduction of phosphoric acid groups, especially in low relative humidity (RH) environments. The measured proton conductivity of SPM-8% was 147, 98, and 28 mS cm-1 under 95%, 70%, and 50% RH, respectively, which is higher than that of the unmodified SPAEN membrane and other SPM-x% membranes. Additionally, the morphology and anisotropy of the membrane proton conductivities were analyzed and discussed. Overall, the results indicated that PPVBC doping can effectively enhance the mechanical and electrochemical properties of SPAEN membranes.

RESUMEN

Fuel cells are electrochemical, ecologically friendly appliances that transform chemical energy into electricity in a clean, simple, and effective manner. With the advancement of technology in the field of computer science, electronic downsizing, and the ongoing need for mobility, the demand for portable energy sources such as fuel cells has considerably increased. The proton exchange membrane, which is designed to be a good conductor for protons while isolating electrons to move from the anode to the cathode, imprinting them an external circuit, and thus creating electricity, is at the heart of such an energy source. Perfluorosulfonic acid-based (NAFION) membranes, first introduced over 50 years ago, are still the state of the art in the field of fuel cell proton exchange membranes today. However, because of the numerous drawbacks connected with the usage of NAFION membranes, the scientific community has shifted its focus to producing new generation membranes based on natural materials, such as cellulose. Therefore, we believe that a review of the most recent studies on the use of cellulose as a material for proton exchange membranes in fuel cells may be very much appreciated by the scientific community.

Asunto(s)

RESUMEN

High-temperature proton-exchange-membrane fuel cells (HT-PEMFCs) can offer improved energy efficiency and tolerance to fuel/air impurities. The high expense of the high-temperature proton-exchange membranes (HT-PEMs) and their low durability at high temperature still impede their further practical applications. In this work, a phosphoric acid (PA)-doped porous aromatic framework (PAF-6-PA) is incorporated into poly[2,2'-(p-oxydiphenylene)-5,5'-benzimidazole] (OPBI) to fabricate novel PAF-6-PA/OPBI composite HT-PEMs through solution-casting. The alkaline nitrogen structure in PAF-6 can be protonated with PA to provide proton hopping sites, and its porous structure can enhance the PA retention in the membranes, thus creating fast pathways for proton transfer. The hydrogen bond interaction between the rigid PAF-6 and OPBI can also enhance the mechanical properties and chemical stability of the composite membranes. Consequently, PAF-6-PA/OPBI exhibits an optimal proton conductivity of 0.089 S cm-1 at 200 °C, and peak power density of 437.7 mW cm-2 (Pt: 0.3 mg cm-2 ), which is significantly higher than that of the OPBI.   The PAF-6-PA/OPBI provides a novel strategy for the practical application of PBI-based HT-PEMs.

RESUMEN

To promote further commercialization of proton exchange membrane (PEM) fuel cells, developing a novel preparation method for high-performance and durable membrane electrode assemblies (MEAs) is imperative. In this study, we adopt the reverse membrane deposition process and expanded polytetrafluoroethylene (ePTFE) reinforcing technology to optimize the interface combination and durability of MEAs simultaneously for the preparation of novel MEAs with double-layer ePTFE reinforcement skeletons (DR-MEA). With the wet-contact between the liquid ionomer solution and porous catalyst layers (CLs), a tight 3D PEM/CL interface is formed in the DR-MEA. Based on this enhanced PEM/CL interface combination, the DR-MEA exhibits a significantly increased electrochemical surface area, reduced interfacial resistance, and improved power performance compared with a conventional MEA (C-MEA) based on a catalyst-coated membrane method. Furthermore, with the reinforcement of double-layer ePTFE skeletons and the support of rigid electrodes for the membranes, the DR-MEA demonstrates less mechanical degradation than the C-MEA after wet/dry cycle test, reflected in lower increase in hydrogen crossover current, interfacial resistance, and charge-transfer resistance and reduced power performance attenuation. With less mechanical degradation, the DR-MEA therefore shows less chemical degradation than the C-MEA after an open-circuit voltage durability test.

RESUMEN

Block copolymers generally have peculiar morphological characteristics, such as strong phase separation. They have been actively applied to polymer electrolyte membranes for proton exchange membrane fuel cells (PEMFCs) to obtain well-defined hydrophilic regions and water channels as a proton pathway. Although molecular simulation tools are advantageous to investigate the mechanism of water channel formation based on the chemical structure and property relationships, classical molecular dynamics simulation has limitations regarding the model size and time scale, and these issues need to be addressed. In this study, we investigated the morphology of sulfonated block copolymers synthesized for PEM applications using a mesoscale simulation based on the dynamic mean-field density functional method, widely applied to investigate macroscopic systems such as polymer blends, micelles, and multi-block/grafting copolymers. Despite the similar solubility parameters of the monomers in our block-copolymer models, very different morphologies in our 3D mesoscale models were obtained. The model with sulfonated monomers, in which the number of sulfonic acid groups is twice that of the other model, showed better phase separation and water channel formation, despite the short length of its hydrophilic block. In conclusion, this unexpected behavior indicates that the role of water molecules is important in making PEM mesoscale models well-equilibrated in the mesoscale simulation, which results in the strong phase separation between hydrophilic and hydrophobic regions and the ensuing well-defined water channel. PEM synthesis supports the conclusion that using the sulfonated monomers with a high sulfonation degree (32.5 mS/cm) will be more effective than using the long hydrophilic block with a low sulfonation degree (25.2 mS/cm).

RESUMEN

High-temperature proton exchange membrane fuel cells (HT-PEMFCs) are of great interest to researchers in industry and academia because of their wide range of applications. This review lists some creative cross-linked polybenzimidazole-based membranes that have been prepared in recent years. Based on the investigation into their chemical structure, the properties of cross-linked polybenzimidazole-based membranes and the prospect of their future applications are discussed. The focus is on the construction of cross-linked structure of various types of polybenzimidazole-based membranes and their effect on proton conductivity. This review expresses the outlook and good expectation of the future direction of cross-linked polybenzimidazole membranes.

RESUMEN

This is a comparative study to clarify the effect of the introduction of layered double hydroxide (LDH) into various polymer matrices. One perfluorosulfonic acid polymer, i.e., Nafion, and two polyaromatic polymers such as sulfonated polyether ether ketone (sPEEK) and sulfonated polysulfone (sPSU), were used for the preparation of nanocomposite membranes at 3 wt.% of LDH loading. Thereafter, the PEMs were characterized by X-ray diffraction (XRD) and dynamic mechanical analysis (DMA) for their microstructural and thermomechanical features, whereas water dynamics and proton conductivity were investigated by nuclear magnetic resonance (PFG and T1) and EIS spectroscopies, respectively. Depending on the hosting matrix, the LDHs can simply provide additional hydrophilic sites or act as physical crosslinkers. In the latter case, an impressive enhancement of both dimensional stability and electrochemical performance was observed. While pristine sPSU exhibited the lowest proton conductivity, the sPSU/LDH nanocomposite was able to compete with Nafion, yielding a conductivity of 122 mS cm-1 at 120 °C and 90% RH with an activation energy of only 8.7 kJ mol-1. The outcome must be ascribed to the mutual and beneficial interaction of the LDH nanoplatelets with the functional groups of sPSU, therefore the choice of the appropriate filler is pivotal for the preparation of highly-performing composites.