RESUMEN
High Br-content mixed-halide perovskites with wide-bandgap (WBG) of 1.6-2.0 eV have showcased vast potential to be used in tandem solar cells. However, they often suffer from severe halide segregation, phase separation and ion migration issues, which would accelerate the decomposition of perovskites films, deteriorate the photovoltaic performance and even aggravate the lead leakage from damaged devices. Here, we report a novel chemical synergic interaction strategy to mitigate the abovementioned issues. A small amount of cationic ß-cyclodextrin, composed of multiple ammonium cations, chlorine ions and abundant hydroxyl functional groups, was introduced into WBG perovskites, which effectively stabilized the halide ions and homogenized the phase distribution, comprehensively passivated the defects,and efficiently immobilized the Pb2+ ions. Encouragingly, the cationic ß-cyclodextrin was universal and useful for different WBG perovskites, which favorably boosted the efficiencies by 10%-36% and extended the device operational stability to 2680 h. The integrated four-terminal or six-terminal all-perovskite tandem solar cells exhibited efficiencies up to 24.39% and 22.42%, respectively. We demonstrated the cationic ß-cyclodextrin-assisted internal chemical encapsulation effectively prevented the Pb leakage from severely damaged devices with only 5.63 ppb Pb leaching out. The target tandem solar cells with cationic ß-cyclodextrin modification also realized a Pb sequestration efficiency of 93.4%.
RESUMEN
Light-induced phase segregation, particularly when incorporating bromine to widen the bandgap, presents significant challenges to the stability and commercialization of perovskite solar cells. This study explores the influence of hole transport layers, specifically poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine (PTAA) and [4-(3,6-dimethyl-9H-carbazol-9-yl)butyl]phosphonic acid (Me-4PACz), on the dynamics of phase segregation. Through detailed characterization of the buried interface, we demonstrate that Me-4PACz enhances perovskite photostability, surpassing the performance of PTAA. Nanoscale analyses using in situ Kelvin probe force microscopy and quantitative nanomechanical mapping techniques elucidate defect distribution at the buried interface during phase segregation, highlighting the critical role of substrate wettability in perovskite growth and interface integrity. The integration of these characterization techniques provides a thorough understanding of the impact of the buried bottom interface on perovskite growth and phase segregation.
RESUMEN
The large open circuit voltage (VOC) loss and phase segregation are two main obstacles hindering the development of wide-bandgap perovskite solar cells (PSCs). Even though substantial progress has been made through crystallization regulation and surface modification on perovskite, the mechanism of VOC loss and phase segregation has rarely been studied. In this paper, we first investigate the halide ions distribution along the out-of-plane direction and find the initial inhomogeneous distribution of halide ions during the crystallization process is an important reason. It leads to the formation of an unfavorable potential well in PSCs, resulting in VOC loss as well as generation of strong strain exacerbating phase segregation. Through introducing melatonin (MT) into perovskite precursors, a homogeneous distribution of halide anions is realized due to the well-regulated crystallization. Consequently, the treated PSCs exhibit an optimized power conversion efficiency (PCE) of 22.88% with a VOC loss as low as 0.38 V, which are the best values for wide-bandgap PSCs up to now.
RESUMEN
High-voltage LiNi0.5Mn1.5O4 (LNMO) spinel oxides are highly promising cobalt-free cathode materials to cater to the surging demand for lithium-ion batteries (LIBs). However, commercial application of LNMOs is still challenging despite decades of research. To address the challenge, the understanding of their crystallography and structural evolutions during synthesis and electrochemical operation is critical. This review aims to illustrate and to update the fundamentals of crystallography, phase transition mechanisms, and electrochemical behaviors of LNMOs. First, the research history of LNMO and its development into a LIB cathode material is outlined. Then the structural basics of LNMOs including the classic and updated views of the crystal polymorphism, interconversion between the polymorphs, and structure-composition relationship is reviewed. Afterward, the phase transition mechanisms of LNMOs that connect structural and electrochemical properties are comprehensively discussed from fundamental thermodynamics to operando dynamics at intra- and inter-particle levels. In addition, phase evolutions during overlithiation as well as thermal-/electrochemical-driven phase transformations of LNMOs are also discussed. Finally, recommendations are offered for the further development of LNMOs as well as other complex materials to unlock their full potential for future sustainable and powerful batteries.
RESUMEN
With the rapid progress in a power conversion efficiency reaching up to 26.1%, which is among the highest efficiency for single-junction solar cells, organic-inorganic hybrid perovskite solar cells have become a research focus in photovoltaic technology all over the world, while the instability of these perovskite solar cells, due to the decomposition of its unstable organic components, has restricted the development of all-inorganic perovskite solar cells. In recent years, Br-mixed halogen all-inorganic perovskites (CsPbI3-xBrx) have aroused great interests due to their ability to balance the band gap and phase stability of pure CsPbX3. However, the photoinduced phase segregation in lead mixed halide perovskites is still a big burden on their practical industrial production and commercialization. Here, we demonstrate inhibited photoinduced phase segregation all-inorganic CsPbI1.2Br1.8 films and their corresponding perovskite solar cells by incorporating a 1-butyl-1-methylpiperidinium tetrafluoroborate ([BMP]+[BF4]-) compound into the CsPbI1.2Br1.8 films. Then, its effect on the perovskite films and the corresponding hole transport layer-free CsPbI1.2Br1.8 solar cells with carbon electrodes under light is investigated. With a prolonged time added to the reduced phase segregation terminal, this additive shows an inhibitory effect on the photoinduced phase segregation phenomenon for perovskite films and devices with enhanced cell efficiency. Our study reveals an efficient and simple route that suppresses photoinduced phase segregation in cesium lead mixed halide perovskite solar cells with enhanced efficiency.
RESUMEN
Perovskite solar cells (PSCs) have attracted extensive attention in photovoltaic applications owing to their superior efficiency, and the buried interface plays a significant role in determining the efficiency and stability of PSCs. Herein, a plant-derived small molecule, ergothioneine (ET), is adopted to heal the defective buried interface of CsPbIBr2-based PSC to improve power conversion efficiency (PCE). Because of the strong interaction between Lewis base groups (-CâO and -CâS) in ET and uncoordinated Pb2+ in the perovskite film from the theoretical simulations and experimental results, the defect density of the CsPbIBr2 perovskite film is significantly reduced, and therefore, the nonradiative recombination in the corresponding device is simultaneously suppressed. Consequently, the target device achieves a high PCE of 11.13% with an open-circuit voltage (VOC) of 1.325 V for hole-free, carbon-based CsPbIBr2 PSCs and 14.56% with a VOC of 1.308 V for CsPbI2Br PSCs. Furthermore, because of the increased ion migration energy, the detrimental phase segregation in this mixed-halide perovskite is weakened, delivering excellent long-term stability for the unencapsulated device in ambient conditions over 70 days with a 96% retention rate of initial efficiency.
RESUMEN
Wide-bandgap (WBG) perovskite solar cells (PSCs) have been widely used as the top cell of tandem solar cells. However, photoinduced phase segregation and high open-circuit voltage loss pose significant obstacles to the development of WBG PSCs. Here, a two-step small-size A-site and large-size X-site incorporation strategy is reported to modulate the lattice distortion and improve the film quality of WBG formamidinium-methylammonium (FAMA) perovskite films for photostable PSCs based on two-step deposition method. First, CsI with content of 0-20% is introduced to tune the lattice distortion and film quality of FAMA perovskite with a bandgap of 1.70 eV. Then, 4% RbI is incorporated to further modulate the perovskite growth and lattice distortion, leading to the suppression of photoinduced phase segregation in the resultant RbCsFAMA quadruple cation perovskites. As a result, the 20%CsI/4%RbI-doped device obtains a promising efficiency of 20.6%, and the corresponding perovskite film shows good photothermal stability. Even without encapsulation, the device can maintain 92% of its initial efficiency after 1000 h of continuous operation under 1 sun equivalent white light-emitting diode illumination.
RESUMEN
Wide-bandgap metal halide perovskites have demonstrated promise in multijunction photovoltaic (PV) cells. However, photoinduced phase segregation and the resultant low open-circuit voltage (Voc) have greatly limited the PV performance of perovskite-based multijunction devices. Here, a alloying strategy is reported to achieve uniform distribution of triple cations and halides in wide-bandgap perovskites by doping Rb+ and Cl- with small ionic radii, which effectively suppresses halide phase segregation while promoting the homogenization of surface potential. Based on this strategy, a Voc of 1.33 V is obtained from single-junction perovskite solar cells, and a VOC approaching 3.0 V and a power conversion efficiency of 25.0% (obtained from reverse scan direction, certified efficiency: 24.19%) on an 1.04 cm2 photoactive area can be achieved in a perovskite/perovskite/c-Si triple-junction tandem cell, where the certification efficiency is by far the greatest performance of perovskite-based triple-junction tandem solar cells. This work overcomes the performance deadlock of perovskite-based triple-junction tandem cells by setting a materials-by-design paradigm.
RESUMEN
Species transport in thin-film Nafion heavily influences proton-exchange membrane (PEMFC) performance, particularly in low-platinum-loaded cells. Literature suggests that phase-segregated nanostructures in hydrated Nafion thin films can reduce species mobility and increase transport losses in cathode catalyst layers. However, these structures have primarily been observed at silicon-Nafion interfaces rather than at more relevant material (e.g., Pt and carbon black) interfaces. In this work, we use neutron reflectometry and X-ray photoelectron spectroscopy to investigate carbon-supported Nafion thin films. Measurements were taken in humidified environments for Nafion thin films (≈30-80 nm) on four different carbon substrates. Results show a variety of interfacial morphologies in carbon-supported Nafion. Differences in carbon samples' roughness, surface chemistry, and hydrophilicity suggest that thin-film Nafion phase segregation is impacted by multiple substrate characteristics. For instance, hydrophilic substrates with smooth surfaces correlate with a high likelihood of lamellar phase segregation parallel to the substrate. When present, the lamellar structures are less pronounced than those observed at silicon oxide interfaces. Local oscillations in water volume fraction for the lamellae were less severe, and the lamellae were thinner and were not observed when the water was removed, all in contrast to Nafion-silicon interfaces. For hydrophobic and rough samples, phase segregation was more isotropic rather than lamellar. Results suggest that Nafion in PEMFC catalyst layers is less influenced by the interface compared with thin films on silicon. Despite this, our results demonstrate that neutron reflectometry measurements of silicon-Nafion interfaces are valuable for PEMFC performance predictions, as water uptake in the majority Nafion layers (i.e., the uniformly hydrated region beyond the lamellar region) trends similarly with thickness, regardless of support material.
RESUMEN
Under continuous light illumination, it is known that localized domains with segregated halide compositions form in semiconducting mixed-halide perovskites, thus severely limiting their optoelectronic applications due to the negative changes in bandgap energies and charge-carrier characteristics. Here mixed-halide perovskite CsPbBr1.2 I1.8 nanocrystals are deposited onto an indium tin oxide substrate, whose temperature can be rapidly changed by ≈10 °C in a few seconds by applying or removing an external voltage. Such a sudden temperature change induces a temporary transition of CsPbBr1.2 I1.8 nanocrystals from the segregated phase to the mixed phase, the latter of which can be permanently maintained when the light illumination is coupled with periodic heating cycles. These findings mark the emergence of a practical solution to the detrimental phase-segregation problem, given that a small temperature modulation is readily available in various fundamental studies and practical devices of mixed-halide perovskites.
RESUMEN
Tailoring bandgap by mixed-halide strategy in perovskites has attracted extraordinary attention due to the flexibility of halide ion combinations and has emerged as the most direct and effective approach to precisely tune the emission wavelength throughout the entire visible light spectrum. Mixed-halide perovskites, yet, still suffered from several problems, particularly phase segregation under external stimuli because of ions migration. Understanding the essential cause and finding sound strategies, thus, remains a challenge for stable and efficient mixed-halide perovskite light-emitting diodes (PeLEDs). The review herein presents an overview of the diverse application scenarios and the profound significance associated with mixed-halide perovskites. We then summarize the challenges and potential research directions toward developing high stable and efficient mixed-halide PeLEDs. The review thus provides a systematic and timely summary for the community to deepen the understanding of mixed-halide perovskite materials and resulting PeLEDs.
RESUMEN
Efficient wide bandgap (WBG) perovskite solar cells (PSCs) are essential for fully maximizing the potential of tandem solar cells. However, these cells currently face challenges such as high photovoltage losses and the presence of phase segregation, which impede the attainment of their expected efficiency and stability. Herein, the root cause of halide segregation is investigated, uncovering a close association with the presence of locally aggregated lead iodide (PbI2 ), particularly at the perovskite/C60 interface. Kelvin-probe atomic force microscopy results indicate that the remaining PbI2 at the interface leads to potential electrical differences between the domain surface and boundaries, which drives the formation of halide segregation. By reacting the surface PbI2 residue with ethanediamine dihydroiodide (EDAI2 ) at proper temperature, it is possible to effectively mitigate the phase segregation. By applying this surface reaction strategy in WBG inverted cells, a notable improvement of ≈100 mV is achieved in photovoltage over a wide range of WBG cells (1.67-1.78 eV), resulting in a champion efficiency of 23.1% (certified 22.95%) for 1.67 eV cells and 19.7% (certified 18.81%) for 1.75 eV cells. Furthermore, efficiency of 26.1% is demonstrated in a monolithic all-perovskite tandem cell.
RESUMEN
All-polymer solar cells have attracted considerable research interest due to their superior morphological stabilities, stretchability, and mechanical durability. However, the morphology optimization of the all-polymer bulk heterojunctions remains challenging due to the two long conjugated polymer chains, limiting its power conversion efficiency. Herein, we focus on the donor-acceptor phase segregation of an all-polymer active layer composed of PM6/PY-IT, a state-of-the-art all-polymer combination, by the introduction of volatile solid additives. Especially with 1,3-dibromo-5-chlorobenzene (DBCl) as the processing additive, we could effectively tune the miscibility between PM6 and PY-IT and thus optimize the phase segregation of the polymer donor and acceptor. Due to the synergetic effects on the favorable phase segregation and desired donor-acceptor distribution, the DBCl-treated devices feature the evident improvement of charge transport and collection, accompanied by the suppressed trap-assisted charge recombination. We consequently achieved a champion device efficiency of 16.5% (16.4% averaged), which is a 13% improvement compared with the control device without DBCl (14.6%). Our results highlight the importance of altering the miscibility of the polymer donor-acceptor pairs for practical applications of high-performance all-polymer solar cells.
RESUMEN
Lead mixed-halide perovskites offer tunable bandgaps for optoelectronic applications, but illumination-induced phase segregation can quickly lead to changes in their crystal structure, bandgaps, and optoelectronic properties, especially for the Br-I mixed system because CsPbI3 tends to form a non-perovskite phase under ambient conditions. These behaviors can impact their performance in practical applications. By embedding such mixed-halide perovskites in a glassy metal-organic framework, a family of stable nanocomposites with tunable emission is created. Combining cathodoluminescence with elemental mapping under a transmission electron microscope, this research identifies a direct relationship between the halide composition and emission energy at the nanoscale. The composite effectively inhibits halide ion migration, and consequently, phase segregation even under high-energy illumination. The detailed mechanism, studied using a combination of spectroscopic characterizations and theoretical modeling, shows that the interfacial binding, instead of the nanoconfinement effect, is the main contributor to the inhibition of phase segregation. These findings pave the way to suppress the phase segregation in mixed-halide perovskites toward stable and high-performance optoelectronics.
RESUMEN
Vertical gradient band-gap heterostructures of two-dimensional (2D) layered perovskites have attracted considerable research interest due to their superior optoelectronic properties and demonstrated potential for use in optical devices. However, its fabrication has been challenging. In this investigation, 2D Ruddlesden-Popper mixed halide perovskite single crystals with a vertical gradient band gap were synthesized by using a solid-state halide diffusion process. X-ray diffraction (XRD) and scanning electron microscopy (SEM) measurements after diffusion confirm that the crystalline and morphology remain intact. The transmittance and photoluminescence (PL) spectra show the formation of a vertical gradient band gap that is ascribed to gradient halide distribution through halide intermixing. The mixed halide crystal exhibits high stability with completely suppressed phase segregation in the time-dependent PL measurement. The time-resolved photoluminescence (TRPL) spectra prove that the mixed halide sample has an enhanced carrier transport due to the Förster resonance energy transfer (FRET) effect. Besides, the halide diffusion behavior is found to be different from the previously proposed "layer-by-layer" diffusion model in exfoliated crystals. The gradient band-gap structure is critical for various applications in which vertical carrier transport is demanded.
RESUMEN
Addition of aqueous hydrohalic acids during the synthesis of colloidal quantum dots (QDs) is widely employed to achieve high-quality QDs. However, this reliance on the use of aqueous solutions is incompatible with oxygen- and water-sensitive precursors such as those used in the synthesis of Te-alloyed ZnSe QDs. Herein, it is shown that this incompatibility leads to phase segregation into Te-rich and Te-poor regions, causing spectral broadening and luminescence peak shifting under high laser irradiation and applied electrical bias. Here, a synthetic strategy to produce anhydrous-HF in situ by using benzenecarbonyl fluoride (BF) as a chemical additive is reported. Through in situ 19 F NMR spectroscopy, it is found that BF reacts with surfactants in tandem, ultimately producing intermediary F···H···trioctylamine adducts. These act as a pseudo-HF source that releases anhydrous HF. The controlled release of HF during nucleation and growth steps homogenizes Te distribution in ZnSeTe lattice, leading to spectrally stable blue-emitting QDs under increasing laser flux from ≈3 µW to ≈12 mW and applied bias from 2.6 to 10 V. Single-dot photoluminescence (PL) spectroscopy and analyses of the absorption, PL and transient absorption spectra together with density functional theory point to the role of anhydrous HF as a Te homogenizer.
RESUMEN
The defects and phase segregation in perovskite will significantly reduce the performance and stability of perovskite solar cells (PSCs). In this work, a deformable coumarin is employed as a multifunctional additive for formamidinium-cesium (FA-Cs) perovskite. During the annealing process of perovskite, the partial decomposition of coumarin passivates the Pb2+ , iodine, and organic cation defects. Additionally, coumarin can affect colloidal size distributions, resulting in relatively large grain size and good crystallinity of target perovskite film. Hence, the carrier extraction/transport can be promoted, trap-assisted recombination is reduced, and energy levels are optimized in target perovskite films. Furthermore, the coumarin treatment can significantly release residual stress. As a result, the champion power conversion efficiencies (PCEs) of 23.18% and 24.14% are obtained for Br-rich (FA0.88 Cs0.12 PbI2.64 Br0.36 ) and Br-poor (FA0.96 Cs0.04 PbI2.8 Br0.12 ) based devices, respectively. The flexible PSCs based on Br-poor perovskite exhibit an excellent PCE of 23.13%, one of the highest values for flexible PSCs reported to date. Due to the inhibition of phase segregation, the target devices exhibit excellent thermal and light stability. This work provides new insights into the additive engineering of passivating defects, stress relief, and inhibition of phase segregation of perovskite films, offering a reliable method to develop state-of-the-art solar cells.
RESUMEN
Transmission electron microscopy (TEM) is indispensable to reveal the cellular nanostructure of the 2:17-type Sm-Co based magnets which act as the first choice for high-temperature magnet-associated devices. However, structural deficiencies could be introduced into the TEM specimen during the ion milling process, which would provide misleading information to understand the microstructure-property relationship of such magnets. In this work, we performed a comparative investigation of the microstructure and microchemistry between two TEM specimens prepared under different ion milling conditions in a model commercial magnet Sm13Gd12Co50Cu8.5Fe13Zr3.5 (wt.%). It is found that additional low-energy ion milling will preferably damage the 1:5H cell boundaries, while having no influence on the 2:17R cell phase. The structure of cell boundary transforms from hexagonal into face-centered-cubic. In addition, the elemental distribution within the damaged cell boundaries becomes discontinuous, segregating into Sm/Gd-rich and Fe/Co/Cu-rich portions. Our study suggested that in order to reveal the true microstructure of the Sm-Co based magnets, the TEM specimen should be carefully prepared to avoid structural damage and artificial deficiencies.
RESUMEN
Optical physical unclonable functions (PUFs) have been considered as an effective tool for anti-counterfeiting owing to the uncontrollable manufacturing process and excellent resistance to machine-learning attacks. However, most optical PUFs exhibit fixed challenge-response pairs and static encoding structures after they are manufactured, which significantly impedes the actual development. Herein, we propose a tunable key-size PUF based on reversible phase segregation in mixed halide perovskites with uncontrollable Br/I ratios under variable power densities. The basic performance of encryption keys of low and high power density was evaluated and indicated a high degree of uniformity, uniqueness, and readout repeatability. Merging the binary keys of low and high power density, tunable key-size PUF is realized with higher security. The proposed tunable key-size PUF offers new insights into the development of dynamic-structure PUFs and demonstrates a novel scheme for achieving higher security of anti-counterfeiting and authentication.
RESUMEN
Inorganic CsPbIBr2 perovskite solar cells (PSCs) have accomplished many milestones, yet their progress has been constrained by ion migration and phase separation. This study explores the modulation of perovskite crystallization kinetics and halide ion migration through chlorobenzene (CB) antisolvent with bis(pentafluorophenyl)zinc (Zn(C6F5)2) additive. The photoluminescence and absorption spectra reveal the significantly reduced phase segregaton in CsPbIBr2 film treated by CB with Zn(C6F5)2. Moreover, this research analyzes the CsPbIBr2 film's free carrier lifetime, diffusion length, and mobility using time-resolved microwave conductivity and transient absorption spectroscopy after Zn(C6F5)2 modification. Consequently, the modified CsPbIBr2 PSCs offer a 12.57% power conversion efficiency (PCE), the highest value among CsPbIBr2 PSCs with negligible hysteresis and prolonged stability. Furthermore, under 1-m-deep water, CsPbIBr2 PSCs display a PCE of 14.18%. These findings provide an understanding of the development of phase-segregation-free CsPbIBr2 films and showcase the prospective applications of CsPbIBr2 PSCs in underwater power systems.