RESUMEN

The non-covalent functionalization of black phosphorus (BP) was studied with a scope of ten tailor-made perylene diimides (PDIs). A combination of UV/Vis-, fluorescence-, as well as Raman spectroscopy and atomic force microscopy was used to investigate the structural factors, which contribute to a pronounced PDI-BP interaction and thus support the protection of BP nanosheets against oxidative degradation. We were able to show, that water-soluble, amphiphilic PDIs with highly charged head groups can be used for the non-covalent functionalization of BP in aqueous media. Here, based on the hydrophobic effect, an efficient adsorption of the respective PDI molecules takes place and leads to the formation of a passivating film, yielding a considerable stabilization of the BP flakes under ambient conditions exceeding 30 days.

RESUMEN

In this study, Fe3O4 nanoparticles (FeNPs) decorated with halogenated perylene diimides (PDIs) have been used for capturing VOCs (volatile organic compounds) through noncovalent binding. Concretely, we have used tetrachlorinated/brominated PDIs as well as a nonhalogenated PDI as a reference system. On the other hand, methanol, ethanol, propanol, and butanol were used as VOCs. Experimental studies along with theoretical calculations (the BP86-D3/def2-TZVPP level of theory) pointed to two possible and likely competitive binding modes (lone pair-π through the π-acidic surface of the PDI and a halogen bond via the σ-holes at the Cl/Br atoms). More in detail, thermal desorption (TD) experiments showed an increase in the VOC retention capacity upon increasing the length of the alkyl chain, suggesting a preference for the interaction with the PDI aromatic surface. In addition, the tetrachlorinated derivative showed larger VOC retention times compared to the tetrabrominated analog. These results were complemented by several state-of-the-art computational tools, such as the electrostatic surface potential analysis, the Quantum Theory of Atoms in Molecules (QTAIM), as well as the noncovalent interaction plot (NCIplot) visual index, which were helpful to rationalize the role of each interaction in the VOC···PDI recognition phenomena.

Asunto(s)

RESUMEN

We report the facile synthesis of asymmetric perylene diimides (asym-PDIs) using readily available reagents, demonstrating their distinct photoluminescent properties. In CHCl3, asym-PDIs exhibit higher solubility compared to traditional perylene dyes, of which solubilities can be varied by substituent selections. Among them, UV-vis absorption spectra of CPE in CHCl3 solution displayed no aggregate peaks in the ground state, maintaining high photoluminescent quantum yields. Also, CPE can be readily dispersed into poly(methyl methacrylate) PMMA (CPE-PMMA), forming thin films without aggregate formation. Importantly, the emission color of CPE-PMMA thin films significantly changes with the addition of polycyclic aromatic hydrocarbons (PAHs). These color changes should be strongly correlated with the HOMO level of the added PAHs.

RESUMEN

Film-based fluorescence sensors have been demonstrated to be powerful tools for real-time detection of trace chemical vapors. While explosive vapor detection via fluorescence quenching has been widely explored, fluorescence-based real-time detection and identification of illicit drug vapors remains a challenge. Here, we report two perylene diimide-based sensing materials, P1 and P2, incorporating 2,2-dihexyloctanyl chains and 4-[tris(4-{tert-butyl}phenyl)methyl]phenyl moieties at the imide positions, respectively. Quartz crystal microbalance with in situ photoluminescence measurements showed that N-methylphenethylamine, a simulant of methamphetamine (MA), diffused into films of P1 and P2 via Fickian and case-II mechanisms, respectively. The difference in the analyte diffusion mechanism led to P2 showing significantly faster luminescence quenching but slower luminescence recovery compared to P1. Finally, the different diffusion mechanisms were used as the basis for developing a simple sensor array based on P1 and P2 that could selectively detect free-base illicit drugs (MA, cocaine, and tetrahydrocannabinol) from potential interferants (organic amines, alcohol, and cosmetics) within 40 s.

Asunto(s)

RESUMEN

Luminescence-based sensing has been demonstrated to be a powerful method for rapid trace detection of chemical vapors (analytes). Analyte diffusion has been shown to be the critical factor for real-time luminescence-based detection of explosive analytes via photoinduced electron transfer in amorphous films of conjugated polymers and dendrimers. However, similar studies to determine the critical factors for sensing have not been performed on materials that employ photoinduced hole transfer (PHT) to detect low electron affinity analytes such as illicit drugs. Nor have such studies been performed on semicrystalline sensing films. We have developed a family of perylene diimide-based sensing materials capable of undergoing PHT with amine-group containing analytes. It was found that the choice of branched alkyl chain [1-hexylheptyl (PHH), 2-hexyloctyl (PHO), or 2,2-dihexyloctyl (PDHO)] attached to the nitrogen atoms of the imide moiety strongly affected the solution-processed film morphology. PHH and PHO were found to contain crystalline phases, whereas PDHO was essentially amorphous. The degree of crystallinity strongly influenced exciton diffusion, with PHH and PHO exhibiting exciton diffusion coefficients that were 20× and 10× greater than the value of the amorphous PDHO. The degree of film crystallinity was also found to be critical when the films were applied to detect N-methylphenethylamine (MPEA), a simulant of methamphetamine. While PHH had the largest exciton diffusion coefficient [(1.0 ± 0.2) × 10-2 cm2 s-1] and analyte uptake (12.3 ± 1.8 ng) it showed the smallest quenching efficiency (2.6% ng-1). In contrast, PHO, which sorbed the least analyte (6.1 ± 0.4 ng) of the three compounds, had the largest quenching efficiency (7.1% ng-1) due to its molecular packing and hence exciton diffusion coefficient [(4.5 ± 1.4) × 10-3 cm2 s-1] not being affected by sorption of the analyte. These results show that when applying fluorescent films in practical detection scenarios there is a potential trade-off between a high exciton diffusion constant and analyte diffusion for semicrystalline sensing materials and that a high exciton diffusion coefficient in an as-cast film does not necessarily translate into a more efficient fluorescent quenching. The results also show that sensing materials that form semicrystalline films, whose packing is not disrupted by analyte diffusion, provide a route for overcoming these effects and achieving high sensitivity.

RESUMEN

3,4,9,10-Perylenetetracarboxylic dianhydride (PDI) is one of the best n-type organic semiconductors and an ideal light-driven catalyst for lignin depolymerization. However, the charge localization effect and the excessively strong intermolecular aggregation trend in PDI result in rapid electron-hole (e- -h+ ) recombination, which limits photocatalytic performance. Herein, polymeric carbon nitride/polyhedral oligomeric silsesquioxane PDI (p-CN/P-PDI) S-scheme heterojunction photocatalyst was prepared by the solvent evaporation-deposition method for C-C bond selective cleavage of lignin ß-O-4 model. Based on the material characterization results, the synergic role of polyhedral oligomeric silsesquioxane (POSS) and S-scheme heterojunction maintains appropriate aggregation domains, achieves better solar light utilization, faster charge-transfer efficiency, and greater redox capacity. Notably, the 3 % p-CN/P-PDI heterostructure exhibits a remarkable enhancement in cleavage conversion efficiency, achieving approximately 16.42 and 2.57 times higher conversion rates compared to polyhedral oligomeric silsesquioxane modified PDI (POSS-PDI) and polymeric carbon nitride (p-CN), respectively.

RESUMEN

Perylene diimides (PDI) are workhorses in the field of organic electronics, owing to their appealing n-semiconducting properties. Optimization of their performances is widely pursued by bay-atom substitution and diverse imide functionalization. Bulk solids and thin-films of these species crystallize in a variety of stacking configurations, depending on the geometry of the stable conformation of the polyaromatic core. We here demonstrate that 1,7-dibromo-substituted perylene diimides, PDI(H2 Br2 ), possessing a heavily twisted conformation in the gas phase, in solution and in the solids, can be easily flattened in the solid state into centrosymmetric molecules if the polyaromatic cores form π-π stabilized chains. This is achieved by using axial residues with low stereochemical hindrance, as guaranteed by a single CH2 /NH spacer directly linked to the imide function. Structural powder diffraction and DFT calculations on four newly designed species of the PDI(H2 Br2 ) class coherently show that, thanks to the flexibility of the N-X-Ar link (X=CH2 /NH), flat cores are indeed obtained by overcoming the interconversion barrier between twisted atropoisomers, of only 26.5 kJ mol-1 . This strategy may then be useful to induce "anomalously flat" polyaromatic cores of different kinds (substituted acenes/rylenes) in the solid state, towards suitable crystal packing and orbital interactions for improved electronic performances.

RESUMEN

A perylene diimide-based metal-organic cage (MOC4c) was found to be an efficient transmembrane transporter for ions and small molecules through the internal cavity of the cage. MOC4c could selectively transport different anions, as evidenced by vesicle-based fluorescenceassays and planar lipid bilayer-based current recordings.Furthermore, MOC4c appears tofacilitate calcein transport across the lipid bilayer membrane of a livingcell, suggesting that MOC4c could be used as a biologicaltool for small molecule drugstransmembrane transportation.

RESUMEN

Organic solar cells have been continuously studied and developed through the last decades. A major step in their development was the introduction of fused-ring non-fullerene electron acceptors. Yet, beside their high efficiency, they suffer from complex synthesis and stability issues. Perylene-based non-fullerene acceptors, in contrast, can be prepared in only a few steps and display good photochemical and thermal stability. Herein, we introduce four monomeric perylene diimide acceptors obtained in a three-step synthesis. In these molecules, the semimetals silicon and germanium were added in the bay position, on one or both sides of the molecules, resulting in asymmetric and symmetric compounds with a red-shifted absorption compared to unsubstituted perylene diimide. Introducing two germanium atoms improved the crystallinity and charge carrier mobility in the blend with the conjugated polymer PM6. In addition, charge carrier separation is significantly influenced by the high crystallinity of this blend, as shown by transient absorption spectroscopy. As a result, the solar cells reached a power conversion efficiency of 5.38 %, which is one of the highest efficiencies of monomeric perylene diimide-based solar cells recorded to date.

RESUMEN

The issue of information security has become a concern in all aspects of daily life, prompting the development of encryption technologies. Therein, optical encryption using color/graphical patterns holds great potential. However, current approaches generally rely on monochromic change upon one or more stimuli, limiting their further application in advanced confidential encryption. Herein, we propose a delicate strategy based on a co-assembly system of perylene bisimides (PBI)/polyvinyl alcohol (PVA) that demonstrates stepwise stimuli response and multicolor changes. The color of the supramolecular system changes from red to purple under the stimulus of UV light, and to orange when exposed to water. The multidimensional chromic response is achieved by an evolution process including the generation, packing rearrangement and quenching of PBI radical anions/dianions. With the virtues of photo- and hydrochromism, this novel co-assembly system was successfully employed for advanced anticounterfeiting and versatile information encryption applications.

RESUMEN

The vinylene-bridged helical perylene diimide (PDI) dimer (PDI2) with a build-in twisted configuration is an alternative building block to the parent PDI for the construction of efficient non-fullerene acceptor (NFAs). Moreover, it has been proved asymmetric strategy plays a vital role in the development of NFAs. Herein, we designed and synthesized a pair of acceptor-donor-acceptor (A-D-A) type PDI2 derivatives, namely IDTIC-PDI and IDT-diPDI2, which contain asymmetric and symmetric end-cap units, respectively. To determine the structure-performance relationships of asymmetric strategy, the organic solar cells (OSCs) based on these two molecules were fabricated and measured. The asymmetric IDTIC-PDI based device exhibits a much higher PCE of 8.23 % than that of symmetric IDT-diPDI2 (5.21 %). These results reveal that symmetry breaking provides an effective way to optimize the photovoltaic performances of PDI2 based OSCs.

RESUMEN

Organic solar cells (OSCs) have experienced rapid progress with the innovation of near-infrared (NIR)-absorbing small-molecular acceptors (SMAs), while the unique electronic properties of the SMAs raise new challenges in relation to cathode engineering for effective electron collection. To address this issue, two fluorinated perylene-diimides (PDIs), PDINN-F and PDINN-2F, are synthesized by a simple fluorination method, for application as cathode interlayer (CIL) materials. The two bay-fluorinated PDI-based CILs possess a lower lowest unoccupied molecular orbital (LUMO) energy level of ≈-4.0 eV, which improves the energy level alignment at the NIR-SMAs (such as BTP-eC9)/CIL for a favorable electron extraction efficiency. The monofluorinated PDINN-F shows higher electron mobility and better improved interfacial compatibility. The PDINN-F-based OSCs with PM6:BTP-eC9 as active layer exhibit an enhanced fill factor and larger short-circuit current density, leading to a high power conversion efficiency (PCE) exceeding 18%. The devices with PDINN-F CIL retain more than 80% of their initial PCE after operating at the maximum power point under continuous illumination for 750 h. This work prescribes a facile, cost-effective, and scalable method for the preparation of stable, high-performance fluorinated CILs, and instilling promise for the NIR-SMAs-based OSCs moving forward.

RESUMEN

Cooperative supramolecular polymerization is important for the synthesis of functional supramolecular homo and block-copolymers of π-systems. Current strategies indicate the need of strong hydrogen bonding (H-bonding) and/or dipolar interactions in the π-systems to achieve cooperativity. In sharp contrast, here we report the cooperative supramolecular polymerization in alkyl chain substituted perylene diimides (alkyl PDIs) driven by dispersive interactions with molecular level understanding. Moreover, alkyl PDIs follow cooperative mechanism with cooperativity similar to the strong H-bonded π-systems (σ ∼10-5 ) despite the lack of strong H-bonding and dipolar interactions. Computer simulations show that this surprising phenomenon in alkyl PDIs is driven by the efficient dispersive interactions among the alkyl chains and π-cores due to their zigzag arrangement in the supramolecular polymer. Importantly, alkyl PDIs display cooperative supramolecular polymerization in both polar and non-polar solvents which is difficult for H-bonded/dipolar π-systems thus highlighting the advantages of dispersive interactions.

RESUMEN

Cathode interface layers (CILs) are important for electron extraction in polymer solar cells (PSCs). Currently, the thickness of CILs is often below 15 nm due to their low electron mobility, which is not favorable for large-scale fabrication. Herein, we report a thick CIL for efficient PSCs by modifying the ZnO nanocrystals (NCs) film with perylene diimides functionalized with amino oxide (PDINO). The combined ZnO NCs/PDINO CIL inherits the high electron mobility of ZnO NCs and dense morphology of PDINO, affording higher power conversion efficiencies (PCEs) of its devices than the sole component controls. The PSCs with the ZnO NCs/PDINO CIL also exhibit good tolerance to the CIL thickness, and the PM6:Y6 and PM6:BTP-eC9 devices can achieve high PCEs of over 15% at the CIL thickness of 70 nm. Further, the ZnO NCs/PDINO devices show better stability than those with sole ZnO NCs or PDINO. Our results provide a new way to construct potential CILs for high performance PSCs.

RESUMEN

Perylene diimides (PDIs), a well-studied class of organic dyes, have a strong tendency to self-aggregate in water, thus greatly restricting their phototheranostic applications. Herein, we report a water-soluble PDI cyclophane "Gemini Box" (GBox-14+ ), consisting of a central PDI chromophore enclosed by double-sided cationic molecular straps. Owing to the effective spatial isolation, the chromophore self-aggregation can be completely eliminated, even in a concentrated aqueous solution up to 2 mM. To our knowledge, GBox-14+ represents an interesting example of a fluorescent PDI cyclophane in water, capable of being employed for lysosome-targetable live-cell imaging. More importantly, the highly concentrated aqueous solution of PDI radical anion can be significantly stabilized by GBox-14+ to exhibit an excellent near-infrared photothermal effect, which was further exploited for efficient and selective antibacterial applications. This work provides a new access to water-soluble non-aggregated organic dyes and promotes their potential biomedical applications.

Asunto(s)

RESUMEN

Chirality is a particularly important concept in nature and exists at all length scales, ranging from the molecular level to the supramolecular level. Over the last two decades, various design strategies have been developed to construct chiral materials based on perylene diimides (PDIs) and to mimic the chiral assembly process in biological systems, but applications of these chiral aggregates are still at an early stage. This Minireview summarizes recent progress in the synthesis and properties of chiral PDIs. The chirality in PDI-based materials can be generated by three different approaches: from the twisted planes of PDIs, the chiral substituents of PDIs, and the co-assembly of achiral PDIs and chiral guests. A comprehensive understanding of the applications of chiral PDIs as well as potential future developments is also provided.

Asunto(s)

RESUMEN

Small-molecule semiconductors used as the channel of organic electrochemical transistors (OECTs) have been rarely reported despite their inherent advantages of well-defined molecular weight, convenient scale-up synthesis, and good performance reproducibility. Herein, three small molecules based on perylene diimides are readily prepared for n-type OECTs. The final molecules show preferred energy levels, tunable backbone conformation, and high film crystallinity, rendering them good n-type dopability, favorable volumetric capacities, and substantial electron mobilities. Consequently, the OECTs afford a record-low threshold voltage of 0.05 V and a normalized peak transconductance of 4.52 × 10-2 S cm-1, as well as impressive long-term cycling stability. Significantly, the OECTs utilized for hydrogen peroxide sensing are further demonstrated with a detection limit of 0.75 µM. This work opens the possibility of developing nonfullerene small molecules as superior n-type OECT materials and provides important insights for designing high-performance small-molecule mixed ion-electron conductors for OECTs and (bio)sensors.

RESUMEN

Layer-by-layer (LBL) sequential solution processing of the active layer has been proven as an effective strategy to improve the performance of organic solar cells (OSCs), which could adjust vertical phase separation and improve device performance. Although perylene diimide (PDI) derivatives are typical acceptors with excellent photoelectric properties, there are few studies on PDI-based LBL OSCs. Herein, three PDI acceptors (TBDPDI-C5, TBDPDI-C11, and SdiPDI) were used to fabricate LBL and bulk heterojunction (BHJ) OSCs, respectively. A series of studies including device optimization, photoluminescence (PL) quenching, dependence of light intensity, carrier mobility, atomic force microscopy (AFM), transmission electron microscopy (TEM), grazing-incidence wide-angle X-ray scattering (GIWAXS), and depth analysis X-ray photoelectron spectroscopy (DXPS) were carried out to make clear the difference of the PDI-based LBL and BHJ OSCs. The results show that LBL OSCs possess better charge transport, higher and more balanced carrier mobility, less exciton recombination loss, more favorable film morphology, and proper vertical component distribution. Therefore, all the three PDI acceptor-based LBL OSCs exhibit higher performance than their BHJ counterparts. Among them, TBDPDI-C5 performs best with a power conversion efficiency of 6.11% for LBL OSCs, higher than its BHJ OSC (5.14%). It is the first time for PDI small molecular acceptors to fabricate high-efficiency OSCs by using an LBL solution-processed method.

RESUMEN

A novel kind of monocyclic and dicyclic dehydro[20]annulenes exhibiting specific sizes and topologies from regioselective unilateral ortho-diethynyl PDI, is developed by Cu-catalyzed Glaser-Hay homo-coupling and cross-coupling. Through the integration of electron-deficient PDI chromophores into the dehydroannulene scaffolding, these macrocycles exhibit intense and characteristic absorption properties and the degenerated LUMO levels. The single-crystal X-ray diffraction analysis unambiguously revealed unique porous supramolecular structures, which display micropore characteristics with surface area of 120.74 m2 g-1 . A moderate electron mobility of 0.05 cm2 V-1 s-1 for chlorine-free dehydro[20]annulene based on micrometer-sized single-crystalline transistors was witnessed. The porous and yet semiconducting features signify the prospects of PDI-integrated dehydroannulenes in organic optoelectronics.

RESUMEN

An electron acceptor with a truxene core and ring-fusion perylene diimide (PDI) tripolymer annulated by selenium (Se) branch, named as FTr-3PDI-Se, is designed and synthesized. FTr-3PDI-Se exhibits large conjugated planar conformation, strong absorption spectra in the regions of 300-400 and 450-550 nm, the deep HOMO energy level of 6.10 eV, and high decomposition temperature above 400°C. The FTr-3PDI-Se: PBDB-T-2Cl based device achieved a disappointing power conversion efficiency (PCE) of 1.6% together with a high V oc of 1.12 V. The low PCE was due to the large aggregates of blend film, the imbalanced hole/electron transport and low PL quenching efficiencies. The high V oc can be attributed to the high-lying LUMO level of FTr-3PDI-Se and the low-lying HOMO level of PBDB-T-2Cl. Our research presents an interesting and effective molecule-designing method to develop non-fullerene acceptor.