RESUMEN

Flexible organic crystalline optical waveguides, i.e., delivering input or self-emit lights through various dynamic organic crystals, have attracted increasing attentions in the past decade. However, the modulation of waveguide outputs relies on chemical design and substituent modification, being time-consuming and laborious. Here we report an elastic organic crystal that displays long-distance light transducing capability up to 2.0 cm and ultra-wide modulation of crystalline optical waveguides between red (645 nm) and near infrared (731 nm) in both the pristine and the elastically bent states based on a pre-designed self-absorption effect. The flexible organic crystalline optical waveguides can be precisely and reversibly reconfigured by controlling irradiation point. In addition, deep red amplified spontaneous emissions (ASE) that are able to transduce through a 5.0 mm bent crystal with an ultra-low optical loss coefficient of 0.092 dB/mm has been attained. To the best of our knowledge, this is the first report of flexible organic ASE waveguides. The present study not only provides a simple yet effective strategy to remarkably modulate flexible organic crystalline optical waveguides but also demonstrates the superiority of laser over normal emission as flexible optical communication elements.

RESUMEN

Monosubstituted 9-(2-bromophenyl)-carbazole (1Br1CZ) and disubstituted 9,9'-(2,4-dibromo-1,3-phenylene) bis(9H-carbazole) (2Br2CZ) are synthesized by introducing bromine into ortho-phenyl position of 9-phenyl-carbazole (PhCZ). The decomposition temperature with 5% mass loss and melting point of 2Br2CZ crystal are 360 and 230 °C. The highest occupied molecular orbital energy level of PhCZ is the highest, and that of 2Br2CZ is the lowest. The crystals of PhCZ, 1Br1CZ, and 2Br2CZ are monoclinic, orthorhombic, and triclinic system, which exhibit room temperature phosphorescence with lifetimes of 171.81, 37.15, and 28.77 ms, and their corresponding phosphorescence quantum yields are 0.83%, 0.16%, and 4.58%. It theoretically reveals that six triplet energy levels (T1-T6) exist under S1 in 2Br2CZ crystal, and the spin orbit coupling constants between S1 and Tn in 2Br2CZ are also greater than those in PhCZ and 1Br1CZ, which promotes the intersystem crossing. Meanwhile, through crystal structure and Hirshfeld surface analysis, the torsion angles between the carbazole unit of 2Br2CZ and the central phenyl group reached 85.28°. The 2Br2CZ crystal exhibits the richest intermolecular interactions. A cavity of 4.498 Å is formed within the crystal skeleton of 2Br2CZ, which can precisely fixe dichloromethane with a record-high desorption temperature over 145 °C.

RESUMEN

In optical materials, the development of absorbers for a wide spectrum is a focal point of research. A pivotal challenge lies in ensuring the stability and durability of optical absorbers, particularly at elevated temperatures. This study introduces a novel approach to creating absorbers with diverse colors, focusing on the synthesis and properties of black crystal wires. In contrast to black gold nanoparticle (Au NP) precipitates, which change color within hours under similar conditions, the method involves strategically trapping Au NPs within defects during the growth of single crystals. This results in black crystal wires that not only exhibit broadband absorption but also maintain exceptional stability even under prolonged exposure to high temperatures. The method also involves the controlled synthesis of colorless and red crystal wires. As a proof of concept, these stable black Au crystal wires demonstrate superior performance in photothermal conversion applications. The methodology, derived from the crystal growth process, presents a defect template that offers a novel approach to material design. Furthermore, these unique crystals, available in various colors, hold significant promise for a range of unexplored applications.

RESUMEN

In this report, we have presented the theoretical and experimental investigation of 2-Methylimdazolium 4-Nitrobenzoic Acid (2MI4NB) - an organic crystal. The good quality 2MI4NB single crystal was grown by slow evaporation technique. Both single and powder X-ray diffraction (XRD) analysis confirmed that the grown crystal structure is Triclinic with the P1 space group. The vibrational modes present in the chemical were validated through Fourier transform infrared (FT-IR) spectrum investigations. Density functional theory (DFT), a quantum chemical approach, has emerged as a potential or an effective tool for studying molecular structure and NLO properties and is being used frequently in applications involving NLO systems. HOMO-LUMO analysis and reactivity parameters were calculated. Molecular Electrostatic Potential (MEP), Natural Bond Orbital (NBO) analysis and first order hyper polarizability were studied by B3LYP theoretical level with 6-311++G(d,p) basic set. In addition, the Mulliken Atomic Charge was calculated with the same basic set. The thermal properties of the 2MI4NB crystal was analysed by TG-DTA studies. It shows that the two endothermic peaks were observed. The optical absorption spectrum shows that there is no absorption in the region of 430-1200 nm. The Z-scan analysis gives the third order NLO properties like refractive index and third-order NLO susceptibility of 2MI4NB crystals.

RESUMEN

A butterfly-shaped phenothiazine derivative, PTTCN, was synthesized to obtain pure organic porous crystals for the highly efficient absorptive separation of toluene (Tol) and methylcyclohexane (Mcy). Due to the presence of three polar cyano groups and nonplanar conformation, these molecules self-assembled into a hydrogen-bonded organic framework (X-HOF-5) with distinct cavities capable of accommodating Tol molecules through multiple hydrogen-bonding interactions. Upon solvent removal via heating, the activated X-HOF-5 retained its cavity structure albeit with altered stacking arrangements, accompanied by a remarkable fluorescent color change from cyan to green. X-HOF-5a can undergo a phase transformation into X-HOF-5 upon reabsorption of Tol, while exhibiting no accommodation of Mcy due to the weak intermolecular interaction between PTTCN and Mcy. This suggests that the activated HOF material prefers Tol over Mcy. Moreover, X-HOF-5a may selectively accommodate Tol in a Tol/Mcy equimolar mixture, and the purity of Tol can reach 97% after release from the framework. Additionally, it is noteworthy that the HOF material exhibits recyclability without any discernible loss in performance.

RESUMEN

Organic semiconductors herald new opportunities for fabricating high-performance flexible and wearable optoelectronic devices owing to their intrinsic mechanical flexibility, excellent optical absorption, and cool-free operation. The photocurrent generation mechanisms are of multiple physical origins, including photoconductive, photovoltaic, and photogating effects, and the influence of individual effects on the device figures-of-merit is still not well understood. Here we fabricated a high-performance pentacene single-crystal transistor employing graphene electrodes and demonstrated the modulation from the photogating mechanism to the photoconduction effect by controlling gate bias. Control experiments indicate that the calculation based on transfer curves tends to overestimate the responsivity due to nearby trap states. Using a high frequency-modulated light signal to suppress the trapping process, we successfully measured its intrinsic -3 dB bandwidth of 75 kHz. Finally, high-resolution and UV-NIR high-speed imaging capability was demonstrated. Our work provides new guidelines for understanding the photophysical process and intrinsic performances of organic devices and also confirms the potential of organic single crystals in high-speed imaging applications.

RESUMEN

Photon upconversion (UC) is a technology that converts lower-energy photons (longer wavelength light) into higher-energy photons (shorter wavelength light), the opposite of fluorescence. Thus, UC is expected to open a vast domain of photonic applications that are not otherwise possible. Recently, UC by triplet-triplet annihilation (TTA) between organic molecules has been studied because of its applicability to low-intensity light, although the majority of such studies have focused on liquid samples in the form of organic solvent solutions. To broaden the range of applications, solid-state UC materials have been an active area of research. We recently developed air-stable, high-performance molecular UC crystals that utilize a stable solid-solution phase of bicomponent organic crystals. This article begins with a brief overview of previous challenges in developing and improving solid-state TTA-UC materials. Then, we briefly review and explain the concept as well as advantages of our molecular solid-solution UC crystals. We applied these organic crystals for the first time to a water environment. We observed blue UC emission upon photoexcitation at 542 nm (green-yellow light) and then measured the excitation intensity dependence as well as the temporal stability of the UC emission in air-saturated water. In nondegassed water, these organic crystals were stable, functioned with a low excitation threshold intensity of a few milliwatts per square centimeter, and exhibited high photo-irradiation durability at least over 40 h; indicating that the developed organic crystals are also viable for aqueous conditions. Therefore, the organic crystals presented in this report are expected to extend the domain of UC-based photonic applications in practical water systems including in vivo diagnostic, clinical, and therapeutic applications.

RESUMEN

Crystallization of organic steric molecules often leads to multiple polyhedral crystal morphologies. However, the relationships among the molecular structure, supramolecular interaction, aggregation mode and crystal morphology are still unclear. In this work, we elaborate two model crystals formed by spiro[fluorene-9,9'-xanthene] (SFX) and spiro[cyclopenta[1,2-b : 5,4-b']dipyridine-5,9'-xanthene] (SDAFX) to demonstrate the feasibility of morphology prediction by periodic bond chain (PBC) theory based on interaction energy (IE) values in terms of single point energy. With non-directional van der Waals forces, only one PBC direction is found in SFX crystal, leading to the irregular 1D rod-like structure. Compared with SFX, the extra N heteroatoms in SDAFX can bring additional hydrogen bonds and some other interactions into the bulky molecular skeletons, inducing 3-dimensionally oriented PBCs to form the explicit F-face network in SDAFX which leads to the final octahedral structure. A simple and accurate method has been provided to quantify PBC vector on the supramolecular level in the organic molecular system, and the PBC theory has also been further demonstrated and developed in the morphology prediction of organic spiro-molecules.

RESUMEN

Biomimetic synthesis of guanine crystals has been focused on in the last years. However, multi-functional guanine crystals occluded with fluorescent molecules have not been realized in the laboratory. Here, the controllable synthesis of guanine crystal microplatelets with fluorescence and pearlescence was achieved for the first time by incorporating Nile red (NR) or fluorescein isothiocyanate (FITC) molecules into guanine crystals. The synthesized fluorescent guanine crystals are pure ß-phase anhydrous guanine single crystals. Aqueous suspensions with NR- and FITC-doped guanine crystals exhibit distinct pearlescence. The fluorescence intensities of NR and FITC were greatly enhanced after being doped into guanine crystals due to the inhibition of aggregation-caused quenching. Moreover, films composed of fluorescent guanine microplatelets exhibit high diffuse reflection intensity (70 %). This work provides a strategy to synthesize multifunctional materials composed of organic crystals occluded with dyes.

RESUMEN

Organic crystals with unique nonlinear optical properties have been attracting attention owing to their capability to outperform their conventional nonorganic counterparts. Since nonlinear material responses are linked to a crystal's internal microscopic structure, molecular engineering of maximally unharmonic quantum potentials can boost macromolecular susceptibilities. Here, large-scale kainic acid (kainate) single crystals were synthesized, and their linear and nonlinear optical properties were studied in a broad spectral range, spanning the visible to THz spectral regions. The non-centrosymmetric zwitterionic crystallization, molecular structure, and intermolecular arrangement were found to act as additive donor-acceptor domains, enhancing the efficiency of the intrinsic second-order optical nonlinearity of this pure enantiomeric crystal. Molecular simulations and experimental analysis were performed to retrieve the crystals' properties. The crystals were predicted and found to have good transparency in a broad spectral range from the UV to the infrared (0.2-20 µm). Second-harmonic generation was measured for ultrashort pumping wavelengths between 800 and 2400 nm, showing an enhanced response around 600 nm. Broadband THz generation was demonstrated with a detection limited bandwidth of >8 THz along with emission efficiencies comparable to and prevailing those of commercial ZnTe crystals. The broadband nonlinear response and high transparency make kainate crystals extremely attractive for realizing a range of nonlinear optical devices.

RESUMEN

Photoreactive molecular crystals have been intensively investigated as next-generation functional materials. Changes in physicochemical properties are usually interpreted in terms of static pre- and post-reaction molecular structures and packings determined by X-ray structure analysis. However, to elucidate the dynamic properties, it is necessary to understand the dynamic nature of photochemical kinetics in crystals. Reaction dynamics in the crystal phase can be dramatically different from those in dilute solution because the local molecular environment evolves as the surrounding reactant molecules are transformed into products. In this Review article, we summarize multiple examples of photochemical reactions in the crystalline phase that do not follow classical kinetic behavior. We also discuss different theoretical methods that can be used to describe this behavior. This Review article should help provide a foundation for future workers to understand and analyze photochemical reaction kinetics in crystals.

RESUMEN

Rubrene single crystals have received a lot of attention for their great potential in electronic and wearable nanoelectronics due to their high carrier mobility and excellent flexibility. While they exhibited remarkable electrical performances, their intrinsic potential as photon detectors has not been fully exploited. Here, we fabricate a sensitive and ultrafast organic phototransistor based on rubrene single crystals. The device covers the ultraviolet to visible range (275-532 nm), and the responsivity and detectivity can reach up to ∼4000 A W-1 and 1011 jones at 532 nm, respectively. Furthermore, the response times are highly gate-tunable down to sub-90 µs, and the cutoff frequency is ∼4 kHz, which is one of the fastest organic material-based phototransistors reported so far. Equally important is that the fabricated device exhibits stable light detection ability even after 8 months, indicating great long-term stability and excellent environmental robustness. The results suggest that the high-quality rubrene single crystal may be a promising material for future flexible optoelectronics with its intrinsic mechanical flexibility.

RESUMEN

Preparation of organic crystals mainly depends on solution-deposition, sublimation, and melt-deposition techniques. Solid-state growth methods are generally not suitable for organic crystal growth due to the unprocurable mass transfer. Herein, we report two pyridine-substituted fluorenone compounds with extraordinary crystal-growth capacity, and these compounds can directly and quickly form single crystals from their amorphous solid powder by heating under antisolvent-assistance conditions. The novel experimental phenomenon and crystal growth mechanism were investigated in depth. The results indicate that multiple intermolecular hydrogen-bonding sites and planar aromatic structure (prone to π-π interactions) of these molecules dominate the mass transfer during crystal growth by providing enough energy. This discovery enhances our knowledge of solid-state methods for single-crystal growth.

RESUMEN

Since the 4th Industrial Revolution, Internet of Things based environments have been widely used in various fields ranging from mobile to medical devices. Simultaneously, information leakage and hacking risks have also increased significantly, and secure authentication and security systems are constantly required. Physical unclonable functions (PUF) are in the spotlight as an alternative. Chaotic phosphorescent patterns are developed based on an organic crystal and atomic seed heterostructure for security labels with PUFs. Phosphorescent organic crystal patterns are formed on MoS2 . They seem similar on a macroscopic scale, whereas each organic crystal exhibits highly disorder features on the microscopic scale. In image analysis, an encoding capacity as a single PUF domain achieves more than 1017 on a MoS2 small fragment with lengths of 25 µm. Therefore, security labels with phosphorescent PUFs can offer superior randomness and no-cloning codes, possibly becoming a promising security strategy for authentication processes.

RESUMEN

Terahertz (THz) time-domain spectroscopy provides a direct and nondestructive method for measuring the dielectric properties of materials directly from the phase delay of coherent electromagnetic radiation propagating through the sample. In cases when crystals are embedded within an inert polymeric pellet, the Landau, Lifshitz, and Looyenga (LLL) effective medium model can be used to extract the intrinsic dielectric constant of the crystalline sample. Subsequently, polarizability can be obtained from the Clausius-Mossotti (CM) relationship. Knowledge of the crystal structure density is required for an analytical solution to the LLL and CM relationships. A novel crystal structure-free graphical method is presented as a way to estimate both dielectric constants and polarizability values for the situation when the crystal structure density is unknown, and the crystals are embedded within a pellet composed of a non-porous polymer. The utility of this crystal structure-free method is demonstrated by analyzing THz time-domain spectra collected for a set of amino acids (L-alanine, L-threonine, and L-glutamine) embedded within pellets composed of polytetrafluoroethylene. Crystal structures are known for each amino acid, thereby enabling a direct comparison of results using the analytical solution and the proposed crystal structure-free graphical method. For each amino acid, the intrinsic dielectric constant is extracted through the LLL effective medium model without using information of their crystal structure densities. THz polarizabilities are then calculated with the CM relationship by using the determined intrinsic dielectric constant for each amino acid coupled with its crystal density as determined graphically. Comparison between the analytical and graphical solutions reveal relative differences between dielectric constants of 3.7, 5.1, and 13.6% for threonine, alanine, and glutamine, respectively, and relative differences between polarizability of 0.6, 0.9, and 5.4%, respectively. These values were determined over the 10-20 cm-1 THz frequency range. The proposed method requires no prior knowledge of crystal structure information.

RESUMEN

Rapid antibiotic susceptibility testing (AST) is critical in determining bacterial resistance or susceptibility to a particular antibiotic. Simple-to-use phenotype-based AST platforms can assist care-givers in timely prescription of the right antibiotic. Monitoring the change of bacterial viability by measuring electrochemical Faradaic current is a promising approach for rapid AST. However, the existing works require mixing redox-active reagents in the solution which can interfere with the antibiotics. In this paper, we developed a facile electrodeposition process for creating a redox-active crystalline layer (denoted as RZx) on pyrolytic graphite sheets (PGS), which was then utilized as the sensing layer for reagent-free electrochemical AST. To demonstrate the proof-of-principle, we tested the sensors with Escherichia coli (E. coli) K-12 treated with two antibiotics, ampicillin and kanamycin. While the sensors enable detection of bacterial metabolism mainly due to pH-sensitivity of RZx (∼ 53 mV/pH), secreted redox-active metabolites/compounds from whole cells are likely contributing to the signal as well. By monitoring the differential voltammetric signals, the sensors enable accurate prediction of the minimum inhibitory concentration (MIC) in 60 min (p < 0.03). The sensors are stable after 60 days storage in ambient conditions and enable analysis of microbial viability in complex solutions, as demonstrated in spiked milk and human whole blood.

Asunto(s)

RESUMEN

The title compounds, 5-(2H-1,3-benzodioxol-5-yl)-N-cyclo-hexyl-penta-2,4-dienamide, C18H21NO3 (I), and 5-(2H-1,3-benzodioxol-5-yl)-1-(pyrrolidin-1-yl)penta-2,4-dien-1-one C16H17NO3 (II), are derivatives of piperine, which is known as a pungent component of pepper. Their geometrical parameters are similar to those of the three polymorphs of piperine, which indicate conjugation of electrons over the length of the mol-ecules. The extended structure of (I) features N-H⋯O amide hydrogen bonds, which generate C(4) [010] chains. The crystal of (II) features aromatic π-π stacking, as for two of three known piperine polymorphs.

RESUMEN

Flexible organic single crystals capable of plastic or elastic deformations have a variety of potential applications. Although the integration of plasticity and elasticity in a crystal is theoretically possible and it may cause rich and complex deformations which are highly demanded for potential applications, the integration is hard to realize in practice. Here, we show that through utilizing different modes of external forces for influencing molecular packing in different crystallographic directions, plastic helical twisting and elastic bending can both be achieved for a crystal, and they can even be realized simultaneously. Detailed crystallographic analyses and contrast experiments disclose the mechanisms behind these two kinds of distinct deformations and their mutual compatibility. Based on the plastically twistable nature of the crystal, a new application field of flexible organic single crystals, namely polarization rotators, is successfully opened up.

RESUMEN

Understanding of the structure-mechanical properties relationship in organic crystals can potentially facilitate the design of crystals with desired mechanical properties through crystal engineering. To understand and predict crystal mechanical properties, including tableting behavior, a number of computational methods have been developed to analyze crystal structure. These include visualization, attachment energy calculation, topological analysis, energy framework, and elasticity tensor calculation. However, different methods often lead to conflicting predictions. There is a need for a computational tool kit for predicting crystal mechanical properties from crystal structures. Using α-oxalic acid anhydrous (OAA) and dihydrate (OAD) as a model system, we have systematically compared their predictive accuracy of the mechanical properties, experimentally determined using powder compaction and nanoindentation. We have found that crystal plasticity can be accurately predicted based on energy framework combined with topological analysis and DFT calculated elasticity tensor. Although very useful in characterizing crystal packing features, structure visualization, topology analysis, and attachment energy calculations alone are insufficient for accurately identifying the slip planes and predicting mechanical properties and tableting behavior of organic crystals.

Asunto(s)

RESUMEN

The ability of theoretical chemists to quantitatively model the weak forces between organic molecules is being exploited to predict their crystal structures and estimate their physical properties. Evolving crystal structure prediction methods are increasingly being used to aid the design of organic functional materials and provide information about thermodynamically plausible polymorphs of speciality organic materials to aid, for example, pharmaceutical development. However, the increasingly sophisticated experimental studies for detecting the range of organic solid-state behaviours provide many challenges for improving quantitative theories that form the basis for the computer modelling. It is challenging to calculate the relative thermodynamic stability of different organic crystal structures, let alone understand the kinetic effects that determine which polymorphs can be observed and are practically important. However, collaborations between experiment and theory are reaching the stage of devising experiments to target the first crystallization of new polymorphs or create novel organic molecular materials.