RESUMEN

Viscoelastic surfactants (VES) are amphiphilic molecules which self-assemble into long polymer-like aggregates-wormlike micelles. Such micellar chains form an entangled network, imparting high viscosity and viscoelasticity to aqueous solutions. VES are currently attracting great attention as the main components of clean hydraulic fracturing fluids used for enhanced oil recovery (EOR). Fracturing fluids consist of proppant particles suspended in a viscoelastic medium. They are pumped into a wellbore under high pressure to create fractures, through which the oil can flow into the well. Polymer gels have been used most often for fracturing operations; however, VES solutions are advantageous as they usually require no breakers other than reservoir hydrocarbons to be cleaned from the well. Many attempts have recently been made to improve the viscoelastic properties, temperature, and salt resistance of VES fluids to make them a cost-effective alternative to polymer gels. This review aims at describing the novel concepts and advancements in the fundamental science of VES-based fracturing fluids reported in the last few years, which have not yet been widely industrially implemented, but are significant for prospective future applications. Recent achievements, reviewed in this paper, include the use of oligomeric surfactants, surfactant mixtures, hybrid nanoparticle/VES, or polymer/VES fluids. The advantages and limitations of the different VES fluids are discussed. The fundamental reasons for the different ways of improvement of VES performance for fracturing are described.

RESUMEN

CO2-switchable oligomeric surfactants have good viscosity-reducing properties; however, the complex synthesis of surfactants limits their application. In this study, a CO2-switchable "pseudo"-tetrameric surfactant oleic acid (OA)/cyclic polyamine (cyclen) was prepared by simple mixing and subsequently used to reduce the viscosity of heavy oil. The surface activity of OA/cyclen was explored by a surface tensiometer and a potential for viscosity reduction was revealed. The CO2 switchability of OA/cyclen was investigated by alternately introducing CO2 and N2, and OA/cyclen was confirmed to exhibit a reversible CO2-switching performance. The emulsification and viscosity reduction analyses elucidated that a molar ratio of OA/cyclen of 4:1 formed the "pseudo"-tetrameric surfactants, and the emulsions of water and heavy oil with OA/cyclen have good stability and low viscosity and can be destabilized quickly by introducing CO2. The findings reported in this study reveal that it is feasible to prepare CO2-switchable pseudo-tetrameric surfactants with viscosity-reducing properties by simple mixing, thus providing a pathway for the emulsification and demulsification of heavy oil by using the CO2-switchable "pseudo"-oligomeric surfactants.

RESUMEN

Commercial surfactants, which are inexpensive and abundant, were covalently grafted to flat and transparent electrodes, and it appears to be a simple functionalization route to design biomembrane sensors at large-scale production. Sparsely tethered bilayer lipid membranes (stBLM) were stabilized using such molecular coatings composed of diluted anchor-harpoon surfactants that grab the membrane with an alkyl chain out of a PEGylated-hydrogel layer, which acts as a soft hydration cushion. The goal of avoiding the synthesis of complex organic molecules to scale up sensors was achieved here by grafting nonionic diblock oligomers (Brij58 = C xH2 x+1(OCH2CH2) nOH with x = 16 and n = 23) and PEO short chains ((OCH2CH2) nOH with n = 9 and n = 23) from their hydroxyl (-OH) end-moiety to a monolayer of -Ar-SO2Cl groups, which are easy to form on electrodes (metals, semiconducting materials, ...) from aryl-diazonium salt reduction. A hybrid molecular coating on gold, with scarce Ar-SO2-Brij58 and PEO oligomers, was used to monitor immobilization and fusion kinetics of DOPC small unilamellar vesicles (SUV) by both quartz crystal microbalance (QCM) and surface plasmon resonance (SPR) techniques. Using flat and transparent thin chromium film electrodes, we designed biosensors to couple surface sensitive techniques for membranes, including X-ray reflectivity (XRR), atomic force microscopy (AFM) with subnanometer resolution, and optical microscopy, such as fluorescence recovery after photobleaching measurements (FRAP), in addition to electrochemistry techniques (cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS)). The advantages of this biomembrane-sensing platform are discussed for research and applications.

Asunto(s)

RESUMEN

New cleavable oligomeric cationic surfactants containing ester groups susceptible to hydrolysis between the hydrocarbon tails and the hydrophilic moiety have been synthesized and their biodegradability and aquatic toxicity examined. Aerobic biodegradability was evaluated by applying a standard method for ready biodegradability, the CO2 Headspace test. Aquatic toxicity was assessed by means of the acute toxicity test with Daphnia. Cleavable oligomeric cationic surfactants undergo a significant biodegradation extent (31-52%) as compared to dimeric surfactants without ester groups that showed null degradation in previous works. However, they do not attain the threshold of ultimate degradation required (60%) to be classed as easily biodegradable chemicals. On the other hand, the introduction of cleavable groups in the surfactant hydrophobic chains reduces the toxic effects on the microorganisms responsible for degradation observed for conventional alkyl ammonium dimeric surfactants. Acute toxicity values of betainate cationic oligomeric surfactants to Daphnia magna, IC50-48 h, varies from 1.5 to 50 mg/L. Aquatic toxicity of oligomeric cationic surfactants depends on their hydrophobicity and increases regularly with the alkyl chain length. However, whether the surfactant is a dimeric or a trimeric betaine ester does not affect their acute toxicity to crustacean.

Asunto(s)

RESUMEN

Grafting commercial surfactants appears to be a simple way to modify electrodes and conducting interfaces, avoiding the synthesis of complex organic molecules. A new surface functionalization route is presented to build surfactant coatings with monolayer thickness grafting molecules considered as nonreactive. A monolayer of -SO2Cl functions (from a p-benzenesulfonyl chloride) was first electrografted. It showed a high reactivity toward weak nucleophiles commonly found on surfactant end-moieties such as hydroxyl groups (-OH), and it was used to covalently graft the following: (1) nonionic diblock oligomers (Brij or CiEj, CxH2x + (OCH2CH2)nOH with x = 16 and n = 23 for Brij58, x = 16 and n = 10 for Brij C10, and x = 16 and n = 2 for Brij52); (2) poly(ethylene glycol) (PEG) short chains (PEO9 for (OCH2CH2)nOH with n = 9) and mixed formula. The surface modification due to these molecular coatings was investigated in terms of wetting properties and interfacial electrochemistry characteristics (charge transfer resistivity, capacity, and ions dynamics). Built on flat and transparent thin chromium films, Brij and PEO mixed coatings have been proven to be promising coatings for electrochemical biosensor application such as for stabilizing a partially tethered supported biomimetic membrane.

RESUMEN

New dimeric, trimeric and tetrameric quaternary ammonium salts were accomplished by reaction of tertiary alkyldimethyl amines with appropriate bromomethylbenzene derivatives. A series of new cationic surfactants contain different alkyl chain lengths (C4-C18), aromatic spacers and different numbers of quaternary nitrogen atoms. The structure of the products was confirmed by spectral analysis (FT-IR, ¹H-NMR, 13C-NMR and 2D-NMR), mass spectroscopy (ESI-MS), elemental analysis, as well as PM5 semiempirical methods. Compound (21) was also analyzed using X-ray crystallography. Critical micelle concentration (CMC) of 1,4-bis-[N-(1-alkyl)-N,N-dimethylammoniummethyl]benzene dibromides (3-9) was determined to characterize the aggregation behavior. The antimicrobial properties of novel QACs (Quaternary Ammonium Salts) were examined to set their minimal inhibitory concentration (MIC) values against fungi Aspergillus niger, Candida albicans, Penicillium chrysogenum and bacteria Staphylococcus aureus, Bacillus subtilis, Escherichia coli and Pseudomonas aeruginosa.

Asunto(s)

RESUMEN

Glycerol carbonate is one of the most potentially multifunction glycerol-derived compounds. Glycerol is an important by-product of the oleochemical industry. The oligomerization of glycerol carbonate, assisted by the glycerol, results in the production of polyhydroxylated oligomers rich in linear carbonate groups. The polar moieties of these oligomers (Mw<1000Da) were supplied by glycerol and glycerol carbonate rather than ethylene oxide as in most commercial surfactants. The insertion of linear carbonate groups into the glycerol-based skeleton rendered the oligomers amphiphilic, resulting in a decrease in air/water surface tension to 57mN/m. We improved the physical and chemical properties of the oligomers, by altering the type of acylation reaction and the nature of the acyl donor. The polar head is constituted of homo-oligomers and hetero-oligomers. Homo-oligomers are oligoglycerol and/or oligocarbonate, hetero-oligomers are oligo(glycerol-glycerol carbonate). Coprah oligoesters had the best surfactant properties (CMC<1mg/mL, πcmc<30mN/m), outperforming molecules of fossil origin, such as ethylene glycol monododecyl ether, glycol ethers and fatty acid esters of sorbitan polyethoxylates. The self-assembling properties of oligocarbonate esters were highlighted by their ability to stabilize inverse and multiple emulsions. The oligo-(glycerol carbonate-glycerol ether) with relatively low molecular weights showed properties of relatively high-molecular weight molecules, and constitute a viable "green" alternative to ethoxylated surfactants.

Asunto(s)