RESUMEN

Given that ethanol can be obtained from abundant biomass resources (e.g., crops, sugarcane, cellulose, and algae), waste, and CO2, its conversion into value-added chemicals holds promise for the sustainable production of high-demand chemical commodities. Nonoxygenated chemicals, including light olefins, 1,3-butadiene, aromatics, and gasoline, are some of the most important of these commodities, substantially contributing to modern lifestyles. Despite the industrial implementation of some ethanol-to-hydrocarbons processes, several fundamental questions and technological challenges remain unaddressed. In addition, the utilization of ethanol as an intermediate provides new opportunities for the direct valorization of CO and CO2. Herein, the recent advances in the design of ethanol conversion catalysts are summarized, providing mechanistic insights into the corresponding reactions and catalyst deactivation, and discussing the related future research directions, including the exploitation of active site proximity to achieve better synergistic effects for reactions involving ethanol.

RESUMEN

Copper(I) ions (Cu+) are used in olefin separations due to their olefin complexing ability and low cost, but their instability in the presence of water and gases limits their widespread use. Ionic liquids (ILs) have emerged as stabilizers of Cu+ ions and prevent their degradation, providing high olefin separation efficiency. There is limited understanding into the role that polymeric ionic liquids (PILs), which possess similar structural characteristics to ILs, have on Cu+ ion-olefin interactions. Moreover, copper ions with diverse oxidation states, including Cu+ and Cu2+ ions, have been rarely employed for olefin separations. In this study, gas chromatography (GC) is used to investigate the interaction strength of olefins to stationary phases composed of the 1-hexyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ([C6MIM+][NTf2-]) IL and the poly(1-hexyl-3-vinylimidazolium [NTf2-]) (poly([C6VIM+][NTf2-])) PIL containing monovalent and divalent copper salts (i.e., [Cu+][NTf2-] and [Cu2+]2[NTf2-]). The chromatographic retention of alkenes, alkynes, dienes, and aromatic compounds was examined. Incorporation of the [Cu2+]2[NTf2-] salt into a stationary phase comprised of poly(dimethylsiloxane) resulted in strong retention of olefins, while its addition to the [C6MIM+][NTf2-] IL and poly([C6VIM+][NTf2-]) PIL allowed for the interaction strength to be modulated. Olefins exhibited greater affinities toward IL and PIL stationary phases containing the [Cu2+]2[NTf2-] salt compared to those with the [Cu+][NTf2-] salt. Elimination of water from both copper salts was observed to be an important factor in promoting olefin interactions, as evidenced by increased olefin retention upon exposure of the stationary phases to high temperatures. To evaluate the long-term thermal stability of the stationary phase, chromatographic retention of probes was measured on the [Cu2+]2[NTf2-]/[C6MIM+][NTf2-] IL stationary phase after its exposure to helium at a temperature of 110 °C.

Asunto(s)

RESUMEN

To genuinely assess the effect of secondary metal promotion on improving the SAPO-34 catalytic performance in MTO reaction, a broad spectrum of metals from different groups of the periodic table (alkali and alkaline earth metals, transition metals, rare earth metals, and basic metals) were investigated. Metals were added through a direct incorporation route with Me/Al2O3 molar ratio of 0.05. Some metals seamlessly incorporated into the SAPO-34 framework and replaced the Si and Al atoms, while others partially merged or even failed to be combined with SAPO and emerged as amorphous phases. Although, in some cases, the surface area of the metal-promoted samples increased due to enhanced nucleation rate and smaller particle formation, the majority of the promoted samples suffered from a severe loss in crystallinity that resulted in inferior catalytic performance. It was also illustrated that hydrogen co-feeding with methanol (H2/MeOH molar ratio of 1.5) at ambient pressure could extend the catalyst lifetime by 27% due to hydrogenation and cracking of the coke species and improve the light olefins selectivity.

RESUMEN

The synthesis of group IV metallocene precatalysts for the polymerization of propylene generally yields two different isomers: The racemic isomer that produces isotactic polypropylene (iPP) and the meso isomer that produces atactic polypropylene (aPP). Due to its poor physical properties, aPP has very limited applications. To avoid obtaining blends of both polymers and thus diminish the mechanical and thermal properties of iPP, the meso metallocene complexes need to be separated from the racemic ones tediously-rendering the metallocene-based polymerization of propylene industrially far less attractive than the Ziegler/Natta process. To overcome this issue, we established an isomerization protocol to convert meso metallocene complexes into their racemic counterparts. This protocol increased the yield of iPP by 400 % while maintaining the polymer's excellent physical properties and was applicable to both hafnocene and zirconocene complexes, as well as different precatalyst activation methods. Through targeted variation of the ligand frameworks, methoxy groups at the indenyl moieties were found to be the structural motifs responsible for an isomerization to take place-this experimental evidence was confirmed by density functional theory calculations. Liquid injection field desorption ionization mass spectrometry, as well as 1H and 29Si nuclear magnetic resonance studies, allowed the proposal of an isomerization mechanism.

RESUMEN

We investigated the potential ecological risks and harm to aquatic organisms posed by anionic surfactants such as α-olefin sulfonate (AOS), which are commonly found in industrial and consumer products, including detergents. This study assessed acute (96-h) and subchronic (14-day) responses using antioxidant activity, protein levels, and histopathological changes in Tubifex tubifex exposed to different AOS concentrations (10% of the LC50, 20% of the LC50, and a control). Molecular docking was used to investigate the potential interactions between the key stress biomarker enzymes (superoxide dismutase, catalase, and cytochrome c oxidase) of Tubifex tubifex. Acute AOS exposure showed a concentration-dependent decrease in survival, and the general unified threshold (GUTS) model revealed that survivorship is linked to individual response patterns rather than random (stochastic) fluctuations. The GUTS model also revealed dose-dependent toxicity patterns in Tubifex tubifex exposed to α-olefin sulfonate (AOS), with adaptive mechanisms at lower concentrations but significant increases in mortality beyond a certain threshold, emphasizing the role of the AOS concentration in shaping its toxicological impact. Exposure to AOS disrupted antioxidant activity, inducing oxidative stress, with GST and GPx showing positive associations with surfactant concentration and increased lipid peroxidation (elevated MDA levels); moreover, AOS exposure decreased protein concentration, signifying disturbances in vital cellular processes. Histopathological examinations revealed various tissue-level alterations, including cellular vacuolation, cytoplasmic swelling, inflammation, necrosis, and apoptosis. Molecular docking analysis demonstrated interactions between AOS and enzymes (-catalase, superoxide dismutase, and cytochrome c oxidase) in Tubifex tubifex, including hydrophobic and hydrogen bond interactions, with the potential to disrupt enzyme structures and activities, leading to cellular process disruptions, oxidative stress, and tissue damage. According to the species sensitivity distribution (SSD), the difference in toxicity between Tilapia melanopleura (higher sensitivity) and Daphnia magna (low sensitivity) to AOS suggests distinct toxicokinetic and toxicodynamic mechanisms attributable to more complex physiology in Tilapia and efficient detoxification in Daphnia due to its smaller size.

Asunto(s)

RESUMEN

Quaternary carbons are embedded in various natural products, pharmaceuticals, and organic materials. However, constructing this valuable motif is far from trivial. Conventional approaches mainly rely on classical polar disconnections and encounter bottlenecks concerning harsh conditions, functional group tolerance, regioselectivity, and step economy. In this context, Kawamata, Baran, Shenvi, and co-workers recently demonstrated that two feedstock chemicals, alkyl carboxylic acids and olefins, could be utilized to construct tetrasubstituted carbons in the presence of an inexpensive iron porphyrin catalyst and a suitable reductant combination through quaternization of the radical intermediates. The method enables access to various sterically encumbered quaternary carbons under mild and robust conditions. Taking a complete detour from conventional approaches, the present heteroselective radical-radical coupling simplifies the synthesis of quaternary carbon-containing molecules through an innovative and distinctive disconnection approach.

RESUMEN

Olefins play an essential role in synthetic chemistry, serving not only as important synthons but also as key functional groups in numerous bio-active molecules. Consequently, there has been considerable interest in the development of more powerful methods for olefins. While the Wittig reaction stands as a prominent choice for olefin synthesis due to its simplicity and the ready availability of raw materials, its limitation lies in the challenge of controlling cis-trans selectivity, hampering its broader application. In this study, a novel Boron-Wittig reaction has been developed utilizing gem-bis(boryl)alkanes and aldehydes as starting materials. This method enables creating favourable intermediates, which possess less steric hindrance, and leading to trans-olefins via intramolecular O-B bonds elimination. Notably, synthesis studies have validated its good efficacy in modifying bioactive molecules and synthesizing drug molecules with great trans-selectivity. Furthermore, the reaction mechanism was elucidated based on intermediate trapping experiments, isotope labelling studies, and kinetic analyses.

RESUMEN

Hypervalent iodine catalysis has been widely utilized in olefin functionalization reactions. Intermolecularly, the regioselective addition of two distinct nucleophiles across the olefin is a challenging process in hypervalent iodine catalysis. We introduce here a unique strategy using simple lithium salts for hypervalent iodine catalyst activation. The activated hypervalent iodine catalyst allows the intermolecular coupling of soft nucleophiles such as amides onto electronically activated olefins with high regioselectivity.

RESUMEN

A general and modular protocol is reported for olefin difunctionalization through mechanochemistry, facilitated by cooperative radical ligand transfer (RLT) and electron catalysis. Utilizing mechanochemical force and catalytic amounts of 2,2,6,6-tetramethylpiperidinyloxyl (TEMPO), ferric nitrate can leverage nitryl radicals, transfer nitrooxy-functional group via RLT, and mediate an electron catalysis cycle under room temperature. A diverse range of activated and unactivated alkenes exhibited chemo- and regioselective 1,2-nitronitrooxylation under solvent-free or solvent-less conditions, showcasing excellent functional group tolerance. Mechanistic studies indicated a significant impact of mechanochemistry and highlighted the radical nature of this nitrative difunctionalization process.

RESUMEN

The various steps in the mechanism of olefin polymerizations mediated by neutral rare-earth metallocene complexes are discussed. The complexes are either trivalent hydride and alkyl rare-earth compounds or divalent metallocenes that are activated by the monomer via an oxidation step. The stereospecific polymerizations of conjugated dienes based on the association of a cationic metallocene complex and an alkylaluminum and the polymerization mechanism based on monomer insertion into an aluminum-carbon bond are also discussed. The exploitation of metallocene complexes for the copolymerization of olefins with conjugated dienes is the subject of a third part of this review. The synthesis of new elastomers called ethylene butadiene rubber (EBR) is highlighted. Finally, the use of rare-earth metallocenes in macromolecular engineering is detailed. This includes the synthesis of functional polyolefins and block copolymers including thermoplastic elastomers.

RESUMEN

A series of a novel CAAC ligands featuring a spiro-fluorene group have been synthesized and complexed with ruthenium alkylidenes, yielding the corresponding Hoveyda-type derivatives as a new family of olefin metathesis catalysts. The novel complexes have been characterized by XRD, HRMS and NMR measurements. The synthetised complexes were tested in catalysis and showed good activity in olefin metathesis, as demonstrated on diethyl diallylmalonate and allyl acetate substrates. The unique backbone in the ligand with the large, yet inflexible condensed system renders interesting properties to the catalyst, exemplified by the good catalytic performance and improved Z-selectivity. In addition, the complex can also serve as a hydrogenation catalyst in a consecutive (one-pot) reaction. The latter reaction can convert allyl acetate to butane-1,4-diol, a valuable chemical intermediate for biodegradable polybutylene succinate (PBS).

RESUMEN

Three organoplatinum(II) complexes bearing natural aryl-olefin and quinoline derivatives, namely, [4-meth-oxy-5-(2-meth-oxy-2-oxoeth-oxy)-2-(prop-2-en-1-yl)phen-yl](quinolin-8-olato)platinum(II), [Pt(C13H15O4)(C9H6NO)], (I), [4-meth-oxy-5-(2-oxo-2-propoxyeth-oxy)-2-(prop-2-en-1-yl)phen-yl](quinoline-2-carboxy-l-ato)platinum(II), [Pt(C15H19O4)(C10H6NO2)], (II), and chlorido-[4-meth-oxy-5-(2-oxo-2-propoxyeth-oxy)-2-(prop-2-en-1-yl)phen-yl](quinoline)-plat-inum(II), [Pt(C15H19O4)Cl(C9H7N)], (III), were synthesized and structurally characterized by IR and 1H NMR spectroscopy, and by single-crystal X-ray diffraction. The results showed that the cyclo-platinated aryl-olefin coordinates with PtII via the carbon atom of the phenyl ring and the C=Colefinic group. The deprotonated 8-hy-droxy-quinoline (C9H6NO) and quinoline-2-carb-oxy-lic acid (C10H6NO2) coordinate with the PtII atom via the N and O atoms in complexes (I) and (II) while the quinoline (C9H7N) coordinates via the N atom in (III). Moreover, the coordinating N atom in complexes (I)-(III) is in the cis position compared to the C=Colefinic group. The crystal packing is characterized by C-H⋯π, C-H⋯O [for (II) and (III)], C-H⋯Cl [for (III) and π-π [for (I)] inter-actions.

RESUMEN

This work describes a model study for synthesis of cellulose-based block copolymers, investigating selective coupling of peracetyl ß-d-cellobiose and perethyl ß-d-cellobiose at their reducing-ends by olefin cross-metathesis (CM). Herein we explore suitable pairs of ω-alkenamides that permit selective, quantitative coupling by CM. Condensation reactions of hepta-O-acetyl-ß-d-cellobiosylamine or hepta-O-ethyl-ß-d-cellobiosylamine with acyl chlorides afforded the corresponding N-(ß-d-cellobiosyl)-ω-alkenamide derivatives with an aromatic olefin or linear olefinic structures. Among the introduced olefinic structures, CM of the undec-10-enamide (Type I olefin) and the acrylamide (Type II olefin) gave the hetero-block tetramers, N-(hepta-O-ethyl-ß-d-cellobiosyl)-N'-(hepta-O-acetyl-ß-d-cellobiosyl)-alkene-α,ω-diamides, with >98 % selectivity. Moreover, selectivity was not influenced by the cellobiose substituents when a Type I olefin with a long alkyl tether was used. Although the amide carbonyl group could chelate the ruthenium atom and reduce CM selectivity, the results indicated that such chelation is suppressed by sterically hindered pyranose rings or the long alkyl chain between the amido group and the double bond. Based on this model study, selective end-to-end coupling of tri-O-ethyl cellulose and acetylated cellobiose was accomplished, proving the concept that this model study with cellobiose derivatives is a useful signpost for selective synthesis of polysaccharide-based block copolymers.

RESUMEN

The effect of halide substitution in Grubbs-Hoveyda II catalysts (GHII catalysts) embedded in the engineered ß-barrel protein nitrobindin (NB4exp) on metathesis activity in aqueous media was studied. Maleimide tagged dibromido and diiodido derivates of the GHII catalyst were synthesized and covalently conjugated to NB4exp. The biohybrid catalysts were characterized spectroscopically confirming the structural integrity. When the two chloride substituents at ruthenium center were exchanged against bromide and iodide, the diiodo derivative was found to show significantly higher catalytic activity in ring-closing metathesis of α,ω-diolefins, whereas the dibromido derivative was less efficient when compared with the parent dichlorido catalyst. Using the diiodido catalyst, high turnover numbers of up to 75 were observed for ring-closing metathesis (RCM) yielding unsaturated six- and seven-membered N-heterocycles.

Asunto(s)

RESUMEN

Metallocene catalysts have attracted much attention from academia and industry for their excellent catalytic activity in the field of olefin polymerization. Cocatalysts play a key role in metallocene catalytic systems, which can not only affect the overall catalytic activity, but also have an obvious influence on the structure and properties of the polymer. Although methylaluminoxane (MAO) is currently the most widely used cocatalyst, its price increases the production cost of polyolefin materials. Ammonium tetrakis(pentafluorophenyl)borate has shown excellent performance in polymerization, being one of the best substitutes for the traditional cocatalyst MAO. Compared with the main catalyst, whose composition and structure are relatively complex, the research on cocatalyst is very limited. This review mainly introduces the research history, preparation methods, and application progress in polymerization of ammonium tetrakis(pentafluorophenyl)borate, deepening our understanding of the role of cocatalyst in polymerization, with the hope of inspiring brand-new thinking on improving and enhancing the overall performance of catalyst systems.

RESUMEN

Synthesis of monomer-recyclable polyesters solely from CO2 and bulk olefins holds great potential in significantly reducing CO2 emissions and addressing the issue of plastic pollution. Due to the kinetic disadvantage of direct copolymerization of CO2 and bulk olefins compared to homopolymerization of bulk olefins, considerable research attention has been devoted to synthesis of polyester via the ring-opening polymerization (ROP) of a six-membered disubstituted lactone intermediate, 1,2-ethylidene-6-vinyl-tetrahydro-2H-pyran-2-one (𝜹-L), obtained from telomerization of CO2 and 1,3-butadiene. However, the conjugate olefin on the six-membered ring of 𝜹-L leads to serious Michael addition side reactions. Thus, the selective ROP of 𝜹-L, which can precisely control the repeating unit for the production of polyesters potentially amenable to efficient monomer recycling, remains an unresolved challenge. Herein, the first example of selective ROP of 𝜹-L is reported using a combination of organobase and N,N'-Bis[3,5-bis(trifluoromethyl)phenyl]urea as the catalytic system. Systematic modifications of the substituent of the urea show that the presence of electron-deficient 3,5-bis(trifluoromethyl)-phenyl groups is the key to the extraordinary selectivity of ring opening over Michael addition. Efficient monomer recovery of oligo(𝜹-L) is also achieved under mild catalytic conditions.

Asunto(s)

RESUMEN

Inspired by the favorable impact of heteroatom-containing groups in phenoxy-imine titanium and late transition metal catalysts, a series of novel pyridylamido hafnium catalysts bearing ─OMe (Cat-OMe), ─CF3 (Cat-CF3), and ─C6F5 (Cat-C6F5) substituents are designed and synthesized. Together with the established hafnium catalysts Cat-H and Cat-iPr by Dow/Symyx, these catalysts are applied in the polymerization of α-olefins, including 1-hexene, 1-octene, and 4M1P, as well as in the copolymerization of these α-olefins with a specifically designed polar monomer. The enhancement of polymer molecular weight derived from catalyst modification and the incorporation of polar monomers is discussed in detail. Notably, the new catalysts are all highly active for α-olefins polymerization, with catalyst Cat-CF3 producing isotactic polymers with the highest molecular weight (Mw = 1649 kg mol-1); in copolymerization with polar monomers, catalyst Cat-OMe yields isotactic copolymer with the highest molecular weight (Mw = 2990 kg mol-1). Interestingly, catalyst Cat-C6F5 bearing a ─C6F5 group in the N-aryl moiety gives rise to poly(α-olefin) with reduced stereoselectivity. The findings of this study underscore the potential of heteroatom-containing groups in the development of early transition metal catalysts and the synthesis of polymer with novel structures.

Asunto(s)

RESUMEN

Spheres comprising 10 wt.% Mo2C/γ-Al2O3, synthesized through the sucrose route, exhibited unprecedented catalytic activity for olefin hydrogenation within an industrial naphtha feedstock that contained 23 wt.% olefins, as determined by supercritical fluid chromatography (SFC). The catalyst demonstrated resilience to sulfur, exhibiting no discernible deactivation signs over a tested 96 h operational period. The resultant hydrogenated naphtha from the catalytic process contained only 2.5 wt.% olefins when the reaction was conducted at 280 °C and 3.44 × 106 Pa H2, subsequently blended with Athabasca bitumen to meet pipeline specifications for oil transportation. Additionally, the carbide catalyst spheres effectively hydrogenated olefins under steam conditions without experiencing any notable hydrogenation in the aromatics. We propose the supported carbide catalyst as a viable alternative to noble metals, serving as a selective agent for olefin elimination from light petroleum distillates in the presence of steam and sulfur, mitigating the formation of gums and deposits during the transportation of diluted bitumen (dilbit) through pipelines.

RESUMEN

Nucleotide analogs known as acyclic and cyclic nucleoside phosphonates (ANPs and CNPs, respectively) have a variety of biological properties, including antibacterial, antiviral, antiparasitic, antineoplastic, and immunomodulatory. A strong reaction that has emerged in the last several decades has fundamentally changed our knowledge of the chemistry of nucleoside phosphonates. In particular, Olefin cross-metathesis (CM) has been a potent and practical synthesis route to produce functionalized olefins from essential alkene precursors. This review describes recent synthesis examples of ANPs and CNPs analogs using the Ru-catalyzed olefin cross-metathesis reactions. Olefin cross-metathesis reactions are performed in the olefinic parts of nucleoside and phosphonate produced by Grubbs, Hoveyda-Grubbs, and Nolan. This review presents a synthetic overview of a few chosen nucleosides with biological significance. Their biological activity results are briefly discussed.

RESUMEN

Cyclic olefin copolymer (COC) has emerged as an interesting biocompatible material for Organ-on-a-Chip (OoC) devices monitoring growth, viability, and metabolism of cells. Despite ISO 10993 approval, systematic investigation of bacteria grown onto COC is a still not documented issue. This study discusses biofilm formations of the canonical wild type BB120 Vibrio campbellii strain on a native COC substrate and addresses the impact of the physico-chemical properties of COC compared to conventional hydroxyapatite (HA) and poly(dimethylsiloxane) (PDMS) surfaces. An interdisciplinary approach combining bacterial colony counting, light microscopy imaging and advanced digital image processing remarks interesting results. First, COC can reduce biomass adhesion with respect to common biopolymers, that is suitable for tuning biofilm formations in the biological and medical areas. Second, remarkably different biofilm morphology (dendritic complex patterns only in the case of COC) was observed among the examined substrates. Third, the observed biofilm morphogenesis was related to the interaction of COC with the conditioning layer of the planktonic biological medium. Fourth, Level Co-occurrence Matrix (CGLM)-based analysis enabled quantitative assessment of the biomass textural fractal development under different coverage conditions. All of this is of key practical relevance in searching innovative biocompatible materials for pharmaceutical, implantable and medical products.

Asunto(s)