RESUMEN

BACKGROUND: Ulnar shortening osteotomy using various osteotomy sites, osteotomy methods, and surgical techniques with a variety of implants has been reported, but nonunion rates and the duration of bone healing are not uniform by the authors. The purpose of this study was to investigate the duration of bone healing and nonunion ratio in patients who underwent ulnar shortening osteotomy by a 5-hole nonlocking plate with a simple transverse osteotomy for ulnar impaction syndrome and to determine the correlation between the gap length of the osteotomy site and the duration of bone healing. METHODS: We assessed patients who underwent ulnar shortening osteotomy for ulnar impaction syndrome using a 5-hole nonlocking plate fixation followed by a simple transverse osteotomy between July 2012 and October 2021. This study was a case series study, and the level of evidence was IV. RESULTS: A total of 80 patients were included. The mean age of the patients was 46.7 years, and 46 patients were men. The average bone union period was 41.8 ± 18.7 weeks. The correlation between the gap length of the osteotomy site and the duration of bone union of the osteotomy site was not significant. The nonunion ratio of our method was 2.5%. CONCLUSION: The nonunion rate of our ulnar shortening osteotomy with a simple transverse osteotomy and a 5-hole nonlocking plate was comparable to that in previous reports, but our method required slightly longer periods for bone union. There was no correlation between the gap length of the osteotomy and the duration of bone union. LEVEL OF EVIDENCE: Level IV (Case series).

RESUMEN

BACKGROUND: The exact benefit of locking plates over nonlocking plates in patients with lateral malleolus fractures remains unclear. The primary aim of this study was to compare the functional outcome of locking plates vs nonlocking plates in patients with a lateral malleolus fracture. The secondary aims were to compare the number of complications and hardware removals and to compare whether results differed for older patients and for patients treated with anatomical locking plates. METHODS: The PubMed/MEDLINE, Embase, Cochrane, and CINAHL databases were searched for studies comparing locking plates with nonlocking plates in patients with fixated lateral malleolus fractures. All included studies were assessed on their methodologic quality using the MINORS. Subgroup analyses were performed on older patients and patients treated with anatomical locking plates. RESULTS: A total of 11 studies were included. The meta-analysis showed that functional outcome did not differ between patients treated with locking plates and nonlocking plates (MD 2.38, 95% CI -2.71 to 7.46). No difference in both complication rate (OR 1.10, 95% CI 0.74-1.63) and the amount of hardware removals (OR 0.77, 95% CI 0.52-1.14) was found. Even after analyzing older patients and patients treated with anatomical locking plates, no benefit was shown. CONCLUSION: This meta-analysis demonstrates no clear benefit in selecting locking plates over nonlocking plates in the treatment of lateral malleolus fractures. CLINICAL RELEVANCE: Locking plates are increasingly being used in the treatment of lateral malleolus fractures. Biomechanical studies have shown an increased stability with use of locking vs nonlocking plates. This clinical review does not support a benefit of use of locking plates for these fractures.

Asunto(s)

RESUMEN

To compare the bending strength of a locking plate (LP), nonlocking plate (NLP), and an external skeletal fixator intramedullary pin (ESF-IM) tie-in fixation applied by a dorsal approach in an avian humerus fracture model, 5 left humeri obtained from pigeon (Columba livia) cadavers were randomly assigned to each repair technique (n = 15). The ESF-IM group was repaired with a 0.062-inch intramedullary pin tied-in with two 0.035-inch positive profile transfixation pins using acrylic filled plastic tubing. The LP group was repaired with a dorsally applied titanium 1.6-mm screw 7-hole locking plate (1 bicortical and 2 monocortical screws in each segment). The NLP group was repaired with a dorsally applied 6-hole stainless steel 1.5-mm dynamic compression plate (all bicortical screws). All constructs were applied before complete ostectomy to allow perfect reconstruction. Constructs were cyclically tested nondestructively for 1000 cycles in four-point bending before being tested to failure. Outcome measures included stiffness, strength, and strain energy. All specimens cycled without failure. The ESF-IM specimens were significantly stiffer and stronger than the plated repair groups. Plated constructs had significantly higher strain energies than ESF-IM. LP and NLP were of equal stiffness, strength, and strain energies. This study demonstrated that bending biomechanical properties of the ESF-IM configuration were superior to those of the dorsal plate fixation. Exact properties of fixation required to facilitate avian fracture healing are largely unknown. Further study, including assessments of optimal plate position and configuration, and torsional and in vivo studies in avian species are warranted.

Asunto(s)

RESUMEN

Calcaneal fractures are the most common fractures of the tarsal bones. The stability of fixation is an important factor for successful reconstruction of calcaneal fractures. The purpose of this study was to analyze the biomechanical influence of plate fixation with different combinations of locking and nonlocking screws during early weight-bearing phase. A three-dimensional FE foot model was established using ANSYS software, which comprised bones, cartilages, plantar fascia, and soft tissue. Calcaneal plate was fixed with whole locking (WLS), whole nonlocking (WNS), and hybrid screw configurations for FE analysis. The WNS generated a 6.1° and 2.2° Bohler angle decrease compared with the intact model and WLS (WNS: 18.9; WLS: 21.1; intact: 25.0°). Some hybrid screw configurations (Bohler angle: 21.5° and 21.2°) generated stability similar to WLS. The FE results showed that the fragments at the posterior facet and the posterior tuberosity sustained more stress. This study recommends that the hybrid screw configuration with at least four locking screws, two at the posterior facet fragment and two at the posterior tuberosity fragment, is the optimal choice for the fixation of Sanders type IIB calcaneal fractures.

Asunto(s)

RESUMEN

BACKGROUND: The optimal treatment of displaced intraarticular calcaneal fractures remains challenging. Currently, there is no uniform method to treat such fractures. The purpose of this study was to compare the radiographic and clinical outcome of nonlocking plates and locking plates in the treatment of intraarticular calcaneal fractures. METHODS: A retrospective comparative study was performed including 42 patients with intraarticular calcaneal fractures that were treated by nonlocking plate (n = 18) or locking plates (n = 24) between January 2010 and June 2012. Radiological and functional outcomes were compared between the 2 groups. RESULTS: At the final follow-up, all fractures were healed, and the patients with a locking plate had a significantly better Bohler's angle and Gissane's angle compared with the nonlocking plate group (P < .05). No complications occurred for the patients in the locking plate group, and 3 patients in the nonlocking plate group had implant loosening that led to loss of reduction (P < .05). The average American Orthopaedic Foot and Ankle Society hindfoot score in the locking plate group was significantly higher than that in the nonlocking plate group (P < .05). No statistically significant difference between the 2 groups was found regarding SF-36 (P > .05). CONCLUSION: This study supports the view that locking plates may provide better stability and functional recovery in the treatment of intraarticular calcaneal fractures. LEVEL OF EVIDENCE: Level III, comparative case series.

Asunto(s)