RESUMEN

Glyphosate (GLY), a globally-used organophosphate herbicide, is frequently detected in various environmental matrices, including water, prompting significant attention due to its persistence and potential ecological impacts. In light of this environmental concern, innovative remediation strategies are warranted. This study utilized Serratia sp. AC-11 isolated from a tropical peatland as a biocatalyst in a microbial fuel cell (MFC) coupled with a homogeneous electron-Fenton (EF) process to degrade glyphosate in aqueous medium. After coupling the processes with a resistance of 100 Ω, an output voltage value of 0.64 V was obtained and maintained stable throughout the experiment. A bacterial biofilm of Serratia sp. AC-11 was formed on the carbon felt electrode, confirmed by attenuated total reflectance-Fourier transformed infrared (ATR-FTIR) and scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS). In the anodic chamber, the GLY biodegradation rate was 100% after 48 h of experimentation, with aminomethylphosphonic acid (AMPA) remaining in the solution. In the cathodic chamber, the GLY degradation rate for the EF process was 69.5% after 48 h experimentation, with almost all of the AMPA degraded by the in situ generated hydroxyl radicals. In conclusion, the results demonstrated that Serratia sp. AC-11 not only catalyzed the biodegradation of glyphosate but also facilitated the generation of electrons for subsequent transfer to initiate the EF reaction to degrade glyphosate. This dual functionality emphasizes the unique capabilities of Serratia sp. AC-11, it as an electrogenic microorganism with application in innovative bioelectrochemical processes, and highlighting its role in sustainable strategies for environmental remediation.

RESUMEN

Excess energy derived from photosynthesis can be used in plant microbial fuel cell (PMFC) systems as a sustainable alternative for the generation of electricity. In this study, the in situ performance of CAM (Crassulacean acid metabolism) plants in Calama, in the Atacama Desert, was evaluated for energy recovery using PMFCs with stainless steel AISI 316L and Cu as electrodes. The plant species evaluated included Aloe perfoliata, Cereus jamacaru, Austrocylindropuntia subulata, Agave potatorum, Aloe arborescens, Malephora crocea, and Kalanchoe daigremontiana. Among the plant species, Kalanchoe daigremontiana demonstrated significant potential as an in situ PMFC, showing a maximum cell potential of 0.248 V and a minimum of 0.139 V. In addition, the cumulative energy for recovery was about 9.4 mWh m-2 of the electrode. The use of CAM plants in PMFCs presents a novel approach for green energy generation, as these plants possess an inherent ability to adapt to arid environments and water-scarce areas such as the Atacama Desert climate.

RESUMEN

The over-exploitation of fossil fuels and their negative environmental impacts have attracted the attention of researchers worldwide, and efforts have been made to propose alternatives for the production of sustainable and clean energy. One proposed alternative is the implementation of bioelectrochemical systems (BESs), such as microbial fuel cells (MFCs), which are sustainable and environmentally friendly. MFCs are devices that use bacterial activity to break down organic matter while generating sustainable electricity. Furthermore, MFCs can produce bioelectricity from various substrates, including domestic wastewater (DWW), municipal wastewater (MWW), and potato and fruit wastes, reducing environmental contamination and decreasing energy consumption and treatment costs. This review focuses on recent advancements regarding the design, configuration, and operation mode of MFCs, as well as their capacity to produce bioelectricity (e.g., 2203 mW/m2) and fuels (i.e., H2: 438.7 mg/L and CH4: 358.7 mg/L). Furthermore, this review highlights practical applications, challenges, and the life-cycle assessment (LCA) of MFCs. Despite the promising biotechnological development of MFCs, great efforts should be made to implement them in a real-time and commercially viable manner.

RESUMEN

Composites of polyurethane and graphite and polyurethane and carbon nanofibers (PU/Graphite 0.5% and PU/CNF 1%) were synthesized and used as anodes in dual-compartment microbial fuel cells (MFCs) for municipal wastewater treatment; electrical energy generation and organic matter removal were assessed. The maximum power density, coulombic efficiency and chemical oxygen demand (COD) removal efficiency in the MFCs packed with the PU/Graphite 0.5% and PU/CNF 1% composites were 232.32 mW/m3 and 90.78 mW/m3, 5.87 and 4.41%, and 51.38 and 68.62%, respectively. In addition, the internal resistance of the MFCs with the best bioelectrochemical performance (PU/Graphite 0.5%) was 1051.11 Ω. The results obtained in this study demonstrate the feasibility of using these types of materials in dual-compartment MFCs for wastewater treatment with electric power generation.

RESUMEN

In this study, graphite, graphene, and hydrophilic-treated graphene electrodes were evaluated in a dual-chamber microbial fuel cell (DC-MFC). Free-oxygen conditions were promoted in anodic and cathodic chambers. Hydrochloric acid at 0.1 M and pH 1.1 was used as a catholyte, in addition to deionized water in the cathodic chamber. Domestic wastewater was used as a substrate, and a DuPontTM Nafion 117 membrane was used as a proton exchange membrane. The maximum power density of 32.07 mW·m-2 was obtained using hydrophilic-treated graphene electrodes and hydrochloric acid as catholyte. This power density was 1.4-fold and 32-fold greater than that of graphene (22.15 mW·m-2) and graphite (1.02 mW·m-2), respectively, under the same operational conditions. In addition, the maximum organic matter removal efficiencies of 69.8% and 75.5% were obtained using hydrophilic-treated graphene electrodes, for hydrochloric acid catholyte and deionized water, respectively. Therefore, the results suggest that the use of hydrophilic-treated graphene functioning as electrodes in DC-MFCs, and hydrochloric acid as a catholyte, favored power density when domestic wastewater is degraded. This opens up new possibilities for improving DC-MFC performance through the selection of suitable new electrode materials and catholytes.

RESUMEN

Bioelectrochemistry has gained importance in recent years for some of its applications on waste valorization, such as wastewater treatment and carbon dioxide conversion, among others. The aim of this review is to provide an updated overview of the applications of bioelectrochemical systems (BESs) for waste valorization in the industry, identifying current limitations and future perspectives of this technology. BESs are classified according to biorefinery concepts into three different categories: (i) waste to power, (ii) waste to fuel and (iii) waste to chemicals. The main issues related to the scalability of bioelectrochemical systems are discussed, such as electrode construction, the addition of redox mediators and the design parameters of the cells. Among the existing BESs, microbial fuel cells (MFCs) and microbial electrolysis cells (MECs) stand out as the more advanced technologies in terms of implementation and R&D investment. However, there has been little transfer of such achievements to enzymatic electrochemical systems. It is necessary that enzymatic systems learn from the knowledge reached with MFC and MEC to accelerate their development to achieve competitiveness in the short term.

Asunto(s)

RESUMEN

A microbial fuel cell (MFC), a novel technology, is a biochemical catalyzer system that can convert the chemical energy of materials to bioelectric energy. This system can serve as a unique device for the treatment of wastewater. Based on this knowledge, we decided to study the bioenergy production ability of Actinomycete and microbial isolates in industrial glass factory wastewater as the decomposers of organic materials in this wastewater and the generation of Voltage and current in two batches and fed-batch conditions. At the most favorable condition maximum of 1.08 V (current 3.66 mA and power density 2.88 mW/m2), 81.2% chemical oxygen demand was obtained for a fed-batch system. Also, the outcomes of MFC's essential parameters, for example, pH and TDS, were studied before and after the performance of MFC. The results showed a significant decrease after the operation of the MFC. To realize which Actinomycete were the most powerful bioelectric microorganism, the growth curve and electricity performance of three kinds of Actinomycete was selected. Results showed that the C2 would be more potent because its Voltage of 0.224 V and current of 1.187 mA possessed by it would result in an excellent power density of 141.42 mW/m2.

RESUMEN

Bioelectrochemical systems (BESs) have been extensively studied for treatment and remediation. However, BESs have the potential to be used for the enrichment of microorganisms that could replace their natural electron donor or acceptor for an electrode. In this study, Winogradsky BES columns with As-rich sediments extracted from an Andean watershed were used as a strategy to enrich lithotrophic electrochemically active microorganisms (EAMs) on electrodes (i.e., cathodes). After 15 months, Winogradsky BESs registered power densities up to 650 µWcm-2. Scanning electron microscopy and linear sweep voltammetry confirmed microbial growth and electrochemical activity on cathodes. Pyrosequencing evidenced differences in bacterial composition between sediments from the field and cathodic biofilms. Six EAMs from genera Herbaspirillum, Ancylobacter, Rhodococcus, Methylobacterium, Sphingomonas, and Pseudomonas were isolated from cathodes using a lithoautotrophic As oxidizers culture medium. These results suggest that the tested Winogradsky BES columns result in an enrichment of electrochemically active As-oxidizing microorganisms. A bioelectrochemical boost of centenarian enrichment approaches, such as the Winogradsky column, represents a promising strategy for prospecting new EAMs linked with the biogeochemical cycles of different metals and metalloids.

RESUMEN

The excessive use of fossil sources for the generation of electrical energy and the increase in different organic wastes have caused great damage to the environment; these problems have promoted new ways of generating electricity in an eco-friendly manner using organic waste. In this sense, this research uses single-chamber microbial fuel cells with zinc and copper as electrodes and pineapple waste as fuel (substrate). Current and voltage peaks of 4.95667 ± 0.54775 mA and 0.99 ± 0.03 V were generated on days 16 and 20, respectively, with the substrate operating at an acid pH of 5.21 ± 0.18 and an electrical conductivity of 145.16 ± 9.86 mS/cm at two degrees Brix. Thus, it was also found that the internal resistance of the cells was 865.845 ± 4.726 Ω, and a maximum power density of 513.99 ± 6.54 mW/m2 was generated at a current density of 6.123 A/m2, and the final FTIR spectrum showed a clear decrease in the initial transmittance peaks. Finally, from the biofilm formed on the anodic electrode, it was possible to molecularly identify the yeast Wickerhamomyces anomalus with 99.82% accuracy. In this way, this research provides a method that companies exporting and importing this fruit may use to generate electrical energy from its waste.

Asunto(s)

RESUMEN

The aim of this work was to assess effect of saturated constructed wetland-Microbial fuel cell system on dissolved oxygen gradient, electricity generation and ammonium removal. Two laboratory-scale systems, one planted with Schoenoplectus californicus (SCW1-MFC) and other without plant (SCW2-MFC), were fed discontinuously with synthetic wastewater over 90 days. Both systems were operated at different organic loading rate (12 and 28 g COD/m2d) and ammonium loading rate (1.6 and 3.0 g NH4+- N/m2 d) under open circuit and close circuit mode. The results indicate that between lower and upper zones of wetlands the average values were in the range of 1.22 ± 0.32 to 1.39 ± 0.27 mg O2/L in SCW1-MFC and 1.28 ± 0.24 to 1.56 ± 0.31 mg O2/L in SCW2-MFC. The effect of operating mode (closed and open circuit) and vegetation on DO was not significant (p > 0.05). Chemical oxygen demand (COD) removal efficiencies, fluctuated between 90 and 95% in the SCW1-MFC and 82 and 94% in the SCW2-MFC system. Regarding NH4+- N, removal efficiencies were above 85% in both systems reaching values maximus 98%. The maximum power density generated was 4 and 10 mW/m2 in SCW1-MFC, while SCW2-MFC recorded the highest values (12 and 22 mW/m2).

RESUMEN

Microbial fuel cells (MFCs) are a technology that can be applied to both the wastewater treatment and bioenergy generation. This work discusses the contribution of improvements regarding the configurations, electrode materials, membrane materials, electron transfer mechanisms, and materials cost on the current and future development of MFCs. Analysis of the most recent scientific publications on the field denotes that dual-chamber MFCs configuration offers the greatest potential due to the excellent ability to be adapted to different operating environments. Carbon-based materials show the best performance, biocompatibility of carbon-brush anode favors the formation of the biofilm in a mixed consortium and in wastewater as a substrate resembles the conditions of real scenarios. Carbon-cloth cathode modified with nanotechnology favors the conductive properties of the electrode. Ceramic clay membranes emerge as an interesting low-cost membrane with a proton conductivity of 0.0817 S cm-1, close to that obtained with the Nafion membrane. The use of nanotechnology in the electrodes also enhances electron transfer in MFCs. It increases the active sites at the anode and improves the interface with microorganisms. At the cathode, it favors its catalytic properties and the oxygen reduction reaction. These features together favor MFCs performance through energy production and substrate degradation with values above 2.0 W m-2 and 90% respectively. All the recent advances in MFCs are gradually contributing to enable technological alternatives that, in addition to wastewater treatment, generate energy in a sustainable manner. It is important to continue the research efforts worldwide to make MFCs an available and affordable technology for industry and society.

RESUMEN

Microbial fuel cells (MFCs) are electrochemical devices focused on bioenergy generation and organic matter removal carried out by microorganisms under anoxic environments. In these types of systems, the anodic oxidation reaction is catalyzed by anaerobic microorganisms, while the cathodic reduction reaction can be carried out biotically or abiotically. Membranes as separators in MFCs are the primary requirements for optimal electrochemical and microbiological performance. MFC configuration and operation are similar to those of proton-exchange membrane fuel cells (PEMFCs)-both having at least one anode and one cathode split by a membrane or separator. The Nafion® 117 (NF-117) membrane, made from perfluorosulfonic acid, is a membrane used as a separator in PEMFCs. By analogy of the operation between electrochemical systems and MFCs, NF-117 membranes have been widely used as separators in MFCs. The main disadvantage of this type of membrane is its high cost; membranes in MFCs can represent up to 60% of the MFC's total cost. This is one of the challenges in scaling up MFCs: finding alternative membranes or separators with low cost and good electrochemical characteristics. The aim of this work is to critically review state-of-the-art membranes and separators used in MFCs. The scope of this review includes: (i) membrane functions in MFCs, (ii) most-used membranes, (iii) membrane cost and efficiency, and (iv) membrane-less MFCs. Currently, there are at least 20 different membranes or separators proposed and evaluated for MFCs, from basic salt bridges to advanced synthetic polymer-based membranes, including ceramic and unconventional separator materials. Studies focusing on either low cost or the use of natural polymers for proton-exchange membranes (PEM) are still scarce. Alternatively, in some works, MFCs have been operated without membranes; however, significant decrements in Coulombic efficiency were found. As the type of membrane affects the performance and total cost of MFCs, it is recommended that research efforts are increased in order to develop new, more economic membranes that exhibit favorable properties and allow for satisfactory cell performance at the same time. The current state of the art of membranes for MFCs addressed in this review will undoubtedly serve as a key insight for future research related to this topic.

RESUMEN

An iron reducing enrichment was obtained from sulfate reducing sludge and was evaluated on the capability of reducing Fe3+ coupled to acetate oxidation in a microbial fuel cell (MFC). Three molar ratios for acetate/Fe3+ were evaluated (2/16, 3.4/27 and 6.9/55 mM). The percentages of Fe3+ reduction were in a range of 80-90, 60-70 and 40-50% for the MFCs at closed circuit for the molar ratios of 2/16, 3.4/27 and 6.9/55 mM, respectively. Acetate consumption was in a range of 80-90% in all cases. The results obtained at closed circuit for current density were: 11.37 mA/m2, 4.5 mA/m2 and 7.37 mA/m2 for the molar ratios of 2/16, 3.4/27 and 6.9/55 mM, respectively. Some microorganisms that were isolated and identified in the MFCs were Azospira oryzae, Cupriavidus metallidurans CH34, Enterobacter bugandensis 247BMC, Citrobacter freundii ATCC8090 and Citrobacter murliniae CDC2970-59, these bacteria have been reported as exoelectrogens in MFC and in MFC involving metals removal but not all of them have been reported to utilize acetate as preferred substrate. The results demonstrate that the isolates can utilize acetate as the sole source of carbon and suggest that Fe3+ reduction was carried out by a combination of different mechanisms (direct contact and redox mediators) utilized by the bacteria identified in the MFC. Storage of the energy generated from the 2/16 mM MFC system arranged in a series of three demonstrated that it is possible to utilize the energy to charge a battery.

Asunto(s)

RESUMEN

Microbial fuel cells integrated into constructed wetlands have been previously studied. Nevertheless, their application as a suitable treatment for wastewater is still in the developmental stage. In this context, the aim of this study was to evaluate organic matter removal and nitrogen transformation by a microbial fuel cell integrated into a constructed wetland (CWMFC). To accomplish this, three experimental systems were operated under batch-mode conditions over 170 days: i) one was planted with Schoenoplectus californicus (P-CWMFC); ii) another was unplanted (NP-CWMFC); and iii) the third system did not have any electrodes (CW) and was used as a control. Chemical oxygen demand (COD) removal efficiency ranged between 74-87%, 69-81% and 62-72% for the P-CWMFC, NP-CWMFC and CW systems, respectively, with organic loading rates (OLR) ranging from 4.8 to 7.9 g COD/m2 d. NH4+-N removal efficiency exceeded 98%, 90% and 83% for P-CWMFC, NP-CWMFC and CW, respectively. Wastewater treatment performance was improved due to anaerobic oxidation that occurred on the anodes. Organic matter removal was 18% higher in closed-circuit mode than in open-circuit mode in both integrated systems (P-CWMFC and NP-CWMFC), and these differences were significant (p < 0.05). With respect to the performance of microbial fuel cells, the maximum power density (8.6 mW/m2) was achieved at an organic loading rate of 7.9 g COD/m2 d with an internal resistance and coulombic efficiency of 251â€¯Ω and 2.4%, respectively. The results obtained in this work can provide positive impacts on CW development by enhancing anaerobic degradation without forced aeration.

Asunto(s)

RESUMEN

This study compares the effects and bacterial community structure of single-chamber microbial fuel cells (MFCs) in the treatment of NH4+-containing wastewater with different chemical oxygen demand (COD)/N ratios, whilst simultaneously conducting stratification research on the cathode biofilm. To this end, five nitrifier pre-enriched single-chamber MFC reactors are established to treat five different COD/N wastewaters, respectively. The results show that MFCs with low COD/N have better NH4+-N removal, electrochemical performance, but the removal stability and COD removal effect are lower than MFCs with high COD/N. High-throughput sequencing reveals that the anode community structure is weakly affected by the COD/N and is dominated by Geobacter; however, the cathode community is complex and susceptible to the COD/N. Furthermore, the pH profile in the cathode biofilm is characterized by a pH microelectrode and fluorescence in situ hybridization (FISH) is used to confirm that the distribution trend of nitrifiers and denitrifiers in cathode biofilm.

Asunto(s)

RESUMEN

PURPOSE: The aim of the present work was to assess the electrogenic activity of bacteria from hydrothermal vent sediments achieved under sulfate reducing (SR) conditions in a microbial fuel cell design with acetate, propionate and butyrate as electron donors. METHODS: Two different mixtures of volatile fatty acids (VFA) were evaluated as the carbon source at two chemical oxygen demand (COD) proportions. The mixtures of VFA used were: acetate, propionate and butyrate COD: 3:0.5:0.5 (stage 1) and acetate - butyrate COD: 3.5:0.5 (stage 2). Periodical analysis of sulfate (SO4 -2), sulfide (HS-) and COD were conducted to assess sulfate reduction (SR) and COD removal along with measurements of voltage and current to assess the global performance of the consortium in the system. RESULTS: Percentage of SR was of 97.5 ± 0.7 and 74.3 ± 1.5% for stage 1 and 2, respectively. The % COD removal was of 91 ± 2.1 and 75.3 ± 9.6 for stage 1 and 2, respectively. Although SR and COD removal were higher at stage 1, in regards of energy, stage 2 presented higher current and power densities and Coulombic efficiency as follows: 741.7 ± 30.5 µA/m2, 376 ± 34.4 µW/m2 and 5 ± 2.7%, whereas for stage 1 these values were: 419 ± 71 µA/m2, 52.7 ± 18 µW/m2 and 0.02%, respectively. A metagenomic analysis - stage 2 - in the anodic chamber, demonstrated that SR was due to Dethiosulfovibrionaceae (HA73), Desulfobacter and Desulfococcus and the electrogenic microorganisms were Planococcus, SHD-231, Proteiniclasticum, vadinCA02, and families Porphyromonadacea and Pseudomonadaceae. CONCLUSIONS: It was demonstrated that microorganisms prevenient from hydrothermal vent sediments adapted to a microbial fuel cell system are able to generate electricity coupled to 74.3 ± 1.5 and 75.3 ± 9.6% of SR and COD removal respectively, with a mixture of acetate - butyrate.

RESUMEN

The assessment of water quality is critical to implement preventive and emergency interventions aimed to limit/avoid environmental contamination and human exposure to toxic compounds. While established high-resolution techniques allow quantitative and qualitative determination of contaminants, their widespread application is not feasible due to cost, time, and need for trained personnel. In this context, the development of easy-to-implement approaches for preliminary detection of contaminants is of the utmost importance. Herein, a portable self-powered microbial electrochemical sensor enabling online monitoring of Cr(VI) is reported. The biosensor employs a bio-inspired redox mediating system to allow extracellular electron transfer between a bacterial isolate from chromium-contaminated environments and the electrode, providing a clear response to Cr(VI) presence. The biosensor shows good linearity (R2 = 0.983) and a limit of detection of 2.4 mg L-1 Cr(VI), with a sensitivity of 0.31 ± 0.02 µA cm-2 mgCr(VI)-1 L. The presented microbial bioanode architecture enhanced biosensor performance thanks to the improved "electrical wiring" between biological entities and the abiotic electrode surface. This approach could be easily implemented in engineered electrode surfaces, such as paper-based multi-anodes that maximize bacterial colonization, further improving biosensor response. Graphical abstract.

Asunto(s)

RESUMEN

Although Cr(VI)-reducing and/or tolerant microorganisms have been investigated, there is no detailed information on the composition of the microbial community of the biocathode microbial fuel cell for Cr(VI) reduction. In this investigation, the bacterial diversity of a biocathode was analyzed using 454 pyrosequencing of the 16S rRNA gene. It was found that most bacteria belonged to phylum Proteobacteria (78.8%), Firmicutes (7.9%), Actinobacteria (6.6%) and Bacteroidetes (5.5%), commonly present in environments contaminated with Cr(VI). The dominance of the genus Pseudomonas (34.87%), followed by the genera Stenotrophomonas (5.8%), Shinella (4%), Papillibacter (3.96%), Brevundimonas (3.91%), Pseu-dochrobactrum (3.54%), Ochrobactrum (3.49%), Hydrogenophaga (2.88%), Rhodococcus (2.88%), Fluviicola (2.35%), and Alcaligenes (2.3%), was found. It is emphasized that some genera have not previously been associated with Cr(VI) reduction. This biocathode from waters contaminated with tannery effluents was able to remove Cr(VI) (97.83%) in the cathodic chamber. Additionally, through use of anaerobic sludge in the anodic chamber, the removal of 76.6% of organic matter (glucose) from synthetic waste water was achieved. In this study, an efficient biocathode for the reduction of Cr(VI) with future use in bioremediation, was characterized.

Aunque se ha investigado sobre los microorganismos reductores y/o tolerantes de Cr(VI), no hay información detallada sobre la composición de la comunidad microbiana del cátodo de una Celda de Combustible Microbiana para la reducción de Cr(VI). En esta investigación se analizó la diversidad bacteriana de un biocátodo usando pirosecuenciación 454 del gen 16S rRNA. Se encontró que la mayoría de las bacterias pertenecieron a los filos Proteobac-teria (78,8%), Firmicutes (7,9%), Actinobacteria (6,6%) y Bacteroidetes (5,5%), comúnmente presentes en ambientes contaminados con Cr(VI). Se encontró como género dominante a Pseudomonas (34,87%), seguido por los géneros Stenotrophomonas (5,8%), Shinella (4%), Papil-libacter (3,96%), Brevundimonas (3,91%), Pseudochrobactrum (3,54%), Ochrobactrum (3,49%), Hydrogenophaga (2,88%), Rhodococcus (2,88%), Fluviicola (2,35%) y Alcaligenes (2,3%). Se destaca que algunos géneros no han sido previamente asociados con la reducción de Cr(VI). Este biocátodo procedente de aguas contaminadas con efluentes de curtiembres fue capaz de remover Cr(VI) (97,83%) en la cámara catódica. Adicionalmente, a través del uso de lodo anaeróbico en la cámara anódica, se logró la remoción del 76,6% de materia orgánica (glucosa) a partir de agua residual sintética. En este estudio se caracterizó un eficiente biocátodo para la reducción de Cr(VI) con futuro uso en biorremediación.

Asunto(s)

RESUMEN

In recent years, halotolerant biofilms have become a subject of interest for its application in Bioelectrochemical systems for wastewater treatment. To determine if the polarization potential affects the microbial community of a halotolerant bioanode, four bioanodes were poised at potentials of +0.34 V/SHE and - 0.16 V/SHE and the 16S rRNA gene was analyzed through a MiSeq (Ilumina) system. Oceanospirillum, Halomonas and Marinobacterium were the most predominant genus; no previous studies have reported the presence of Oceanospirillum in anodic biofilms. The fitness with the dataset for +0.34 V/SHE with a modified Butler Volmer Monod model, gives a value of K1 was 0.0002 (2.64 A m-2 and 38% coulombic efficiency), indicating the fastest electrochemical reaction. Whereas that -0.16 V/SHE case, the high value of K1 (12.2 with 1.82 A m-2 and 10% coulombic efficiency) indicated that the electron transfer was far from being reversible (Nernstian).

Asunto(s)

RESUMEN

Microbial life is predominantly observed as biofilms, which are a sessile aggregation of microbial cells formed in response to stress conditions. The microtiter dish biofilm formation assay is one of the most important methods of studying biofilm formation. In this study, the assay has been improvised to allow easy detection of biofilm formation on different substrata. The method has then been used to study growth conditions that affect biofilm formation, viz., the effect of pH, temperature, shaking conditions, and the carbon source provided. Glass, cellulose acetate, and carbon cloth materials were used as substrata to study biofilm development under the above conditions. The method was then extended to determine biofilm formation on the anodes of a microbial fuel cell in order to study the effect of biofilm formation on power production. A high correlation was observed between biofilm formation and power density (r = 0.951). When the electrode containing a biofilm was replaced with another electrode without biofilm, the average power density dropped from 59.55 to 5.76 mW/m2. This method offers an easy way to study the suitability of different materials to support biofilm formation. Growth conditions determining biofilm formation can be studied using this method. This method also offers a non-invasive way to determine biofilm formation on anodes of microbial fuel cells and preserves the anode for further studies.

Asunto(s)