RESUMEN

Utilizing the manipulation of perovskite dimensions has been proven as an effective approach in regulating perovskite properties. Nevertheless, achieving precise control over the dimensions of perovskites within the same system poses a significant challenge. In this study, we introduce a sophisticated method to attain precise dimensional control in metal-free perovskites (MFPs), specifically through the process of octahedron tailoring by compositional engineering. Accordingly, we successfully instigated a transition from HPIP-NH4I3 ⋅ H2O (3D), HPIP2-NH4I5 (2D) and HPIP3-NH4I7 (1D) structures. Notably, HPIP2-NH4I5 is the first 2D MFP. As anticipated, these perovskites exhibited completely distinct fluorescence and X-ray detection capabilities due to their differing dimensions. Remarkably, the 2D HPIP2-NH4I5 device effectively hindered ion migration perpendicular to the 2D layers, achieving the lowest detection limit of 12.2 nGyair s-1 among metal-free single crystals-based detectors. This study expands the dimensionality control strategies for MFPs and introduces, for the first time, the potential of 2D MFPs as high-performance X-ray detectors, thereby enriching the diversity of the MFPs family.

RESUMEN

Halide perovskites have shown great potential in X-ray detection due to outstanding optoelectronic properties. However, finding a cost-effective and environmentally sustainable method for handling end-of-life devices has remained challenging. Here, a "One-Click Restart" eco-friendly recycling strategy is introduced for end-of-life perovskite X-ray detectors. This method, utilizing water, allows for the recapture and reuse of both perovskite and conductor materials. The process is straightforward and environmentally friendly, eliminating the need for further chemical treatment, purification, additional additives or catalysts, and complex equipment. A sustainable device cycle is developed by reconstructing flexible perovskite membranes for wearable electronics from recycled materials. Large-scale, flexible membranes made from metal-free perovskite DABCO-N2H5-I3 (DABCO = N-N'-diazabicyclo[2.2.2]octonium) achieve remarkably impressive average sensitivity of 6204 ± 268 µC Gyair -1 cm-2 and a low detection limit of 102.3 nGyair s-1, which makes highly effective for X-ray imaging. The sensitivity of recycled flexible devices not only matches that of single-crystal devices made with fresh materials but also ranks as the highest among all metal-free perovskite X-ray detectors. "One-Click Restart" applies to scalable flexible devices derived from aged single-crystal counterparts, offering significant cost, time, and energy savings compared to their single-crystal equivalents. Such advantages significantly boost future market competitiveness.

RESUMEN

Halide perovskites are emerging as promising materials for X-ray detection owing to their compatibility with flexible fabrication, cost-effective solution processing, and exceptional carrier transport behaviors. However, the challenge of removing lead from high-performing perovskites, crucial for wearable electronics, while retaining their superior performance, persists. Here, we present for the first time a highly sensitive and robust flexible X-ray detector utilizing a biocompatible, metal-free perovskite, MDABCO-NH4I3 (MDABCO = methyl-N'-diazabicyclo[2.2.2]octonium). This wearable X-ray detector, based on a MDABCO-NH4I3 thick membrane, exhibits remarkable properties including a large resistivity of 1.13 × 1011 Ω cm, a high mobility-lifetime product (µ-τ) of 1.64 × 10-4 cm2 V-1, and spin Seebeck effect coefficient of 1.9 nV K-1. We achieve a high sensitivity of 6521.6 ± 700 µC Gyair-1 cm-2 and a low detection limit of 77 nGyair s-1, ranking among the highest for biocompatible X-ray detectors. Additionally, the device exhibits effective X-ray imaging at a low dose rate of 1.87 µGyair s-1, which is approximately one-third of the dose rate used in regular medical diagnostics. Crucially, both the MDABCO-NH4I3 thick membrane and the device showcase excellent mechanical robustness. These attributes render the flexible MDABCO-NH4I3 thick membranes highly competitive for next-generation, high-performance, wearable X-ray detection applications.

RESUMEN

Metal-free perovskites are a promising class of materials for X-ray detection due to their unique structural, optical, and electrical properties. Here, we first delve into the stoichiometry and geometric argument of metal-free perovskites. Followed, the alternative A/B/X ions and hydrogen-bonding are clearly introduced to further optimize the materials' stability and properties. Finally, we provide a comprehensive overview of their potential applications for flexible X-ray images and prospects for metal-free perovskite development. In conclusion, metal-free perovskite is a promising material for X-ray detection. Its stoichiometric and geometric parameters, ion, and hydrogen bond selection, and application prospects are worthy of further study.

RESUMEN

Metal-free halide perovskites (MFHaPs) have garnered significant attention in recent years due to their desirable properties, such as low toxicity, light weight, chemical versatility, and potential for optoelectronics. MFHaPs with the formula A2+ B+ X-3 (where A is a large organic divalent cation, B+ is typically NH4 + , and X is a halide) have been studied extensively, but few studies have examined alternative cations at the B position. This paper reports the synthesis of three MFHaP-related single crystals, DABCO-N2 H5 -X3 (DABCO = N-N-diazabicyclo[2.2.2]octonium, X = Br and I) and (DABCO)3 -N2 H5 (NH4 )2 Cl9 , which feature hydrazinium (N2 H5 ) at the B position. The crystals have a perovskite-like, one-dimensional, edge-connected structure and exhibit optical and band structure properties. The crystals were then tested as X-ray detectors, where they showed excellent photoresponsivity, stability, and low background noise, owing to the large semi-gap that dictates long lifetimes. The detectors exhibited sensitivity as high as 1143 ± 10 µC Gyair -1 cm-2 and a low detection limit of 2.68 µGy s-1 at 10 V. The researchers suggest that the stronger hydrogen bonding in N2 H5 + compounds compared to NH4 + MFHaPs may contribute to the detectors' enhanced stability.

RESUMEN

Metal-free perovskites (MFPs) possess excellent photophysical properties of perovskites while avoiding the introduction of toxic metal ions and organic solvents, and have been expanded to X-ray detection. However, iodine-based high-performance MFPs are tended to oxidation, corrosion, and uncontrolled ion migration, resulting in poor material stability and device performance. Herein, the strongly electronegative PF6 - pseudohalide is used to fabricate the large-size MDABCO-NH4 (PF6 )3 (MDBACO = methyl-N'-diazabicyclo[2.2.2]octonium) single crystals (SCs) for solving the problems of iodine ions. After the introduction of PF6 - pseudohalides, the Coulomb interaction and hydrogen bonding strength are enhanced to alleviate the ion-migration and stability problems. Moreover, combined with theoretical calculations, PF6 - pseudohalides increase the ion-migration barrier, and affect the contribution of its components to the energy band for a broadening bandgap. Meanwhile, the improved physical properties, such as large activation energy of ionic migration, high resistivity, and low current drift, further expand its application in low-dose and sensitive X-ray detection. Finally, the X-ray detector based on MDABCO-NH4 (PF6 )3 SCs achieves a sensitivity of 2078 µC Gyair -1 cm-2 (highest among metal-free SCs-based detectors) and the lowest detectable dose rate (16.3 nGyair s-1 ). This work has expanded the selection of MFPs for X-ray detectors and somewhat advanced the development of high-performance devices.

RESUMEN

The perovskites are an intensely studied class of materials, with a breadth of possible compositions made even wider by the possibility of incorporating molecular ions. Here the context is discussed of a newly reported metal-free perovskite with the H3O+ ion on the B site.

RESUMEN

The structure and stoichiometry of a new metal-free and ammonium-free compound [dabcoH2]2+H3O+Br- 3 (where [dabcoH2]2+ = 1,4-di-aza-bicyclo-[2.2.2]octane dication) correspond to the general formula ABX 3 characteristic of perovskites. In enantiomorphic trigonal polymorph α of [dabcoH2]2+H3O+Br- 3, the corner-sharing [H3O]Br6 octahedra combine into a 3D framework embedding [dabcoH2]2+ dications in pseudo-cubic cages. In the more dense polymorph ß, the face-sharing [H3O]Br6 octahedra form 1D polyanionic columns separated by [dabcoH2]2+ dications. These different topologies correlate with different crystal fields around the cations and their different disorder types: orientational disorders of [dabcoH2]2+ dications and H3O+ cations in polymorph α and positional disorder of [H3O]+ cations in polymorph ß. The orientational disorder increases the lengths of OH⋯Br hydrogen bonds in polymorph α, but NH⋯Br distances of ordered dabcoH2 dications are longer in polymorph ß. The presence of polar [H3O]+ cations in [dabcoH2]2+H3O+Br- 3 polymorphs offers additional polarizability of the centres compared with analogous metal-free [dabcoH2]2+[NH4]+Br- 3 perovskite.

RESUMEN

Solution-processed metal-based halide perovskites have taken a dominant position for perovskite optoelectronics including light emission and X-ray detection; however, the toxicity of the included heavy metals severely restricts their applications for wearable, lightweight, and transient optoelectronic devices. Here, the authors describe investigations of large (4 × 6 × 2 mm3 ) 3D metal-free perovskite MDABCO-NH4 I3 (MDBACO = methyl-N'-diazabicyclo[2.2.2]octonium) single crystal and its charge recombination and extraction behavior for light emission and X-ray detection. Unlike conventional 3D metal-based perovskites, this lightweight and biocompatible perovskite large crystal is processed from aqueous solution at room temperature, and can achieve both an extremely long carrier lifetime up to ≈1.03 µs and the formation of self-trapped excited states for luminescence. These features contribute to a photoluminescence quantum yield (PLQY) as high as ≈53% at room temperature and an X-ray sensitivity up to 1997 ± 80 µC Gy cm-2 at 50 V bias (highest among all metal-free detectors). The ability to tune the perovskite band gap by modulating the structure under high pressure is also demonstrated, which opens up applications for the crystal as colored emitters. These attributes make it a molecular alternative to metal-based perovskites for biocompatible and transient optoelectronics.

Asunto(s)

RESUMEN

Electro-optic (EO) modulation is of interest to impart information onto an optical carrier. Inorganic crystals-most notably LiNbO3 and BaTiO3-exhibit EO modulation and good stability, but are difficult to integrate with silicon photonic technology. Solution-processed organic EO materials are readily integrated but suffer from thermal degradation at the temperatures required in operating conditions for accelerated reliability studies. Hybrid organic-inorganic metal halide perovskites have the potential to overcome these limitations; however, these have so far relied on heavy metals such as lead and cadmium. Here, we report linear EO modulation using metal-free perovskites, which maintain the crystalline features of the inorganic EO materials and incorporate the flexible functionality of organic EO chromophores. We find that, by introducing a deficiency of cations, we reduce the symmetry in the perovskite crystal and produce thereby an increased EO response. The best-engineered perovskites reported herein showcase an EO coefficient of 14 pm V-1 at a modulation frequency of 80 kHz, an order of magnitude higher than in the nondefective materials. We observe split peaks in the X-ray diffraction and neutron diffraction patterns of the defective sample, indicating that the crystalline structure has been distorted and the symmetry reduced. Density functional theory (DFT) studies link this decreased symmetry to NH4+ deficiencies. This demonstration of EO from metal-free perovskites highlights their potential in next-generation optical information transmission.