RESUMEN

Development of high-performing catalytic materials for selective and mild chemical transformations through adhering to the principles of sustainability remains a central focus in modern chemistry. Herein, we report the template-free assembly of a thermochemically robust covalent organic polymer (COP: 1) from 2,2'-bipyridine-5,5'-dicarbonyl dichloride and 2,4,6-tris(4-aminophenyl)triazine as [2 + 3] structural motifs. The two-dimensional (2D) layered architecture contains carboxamide functionality, delocalized π-cloud, and free pyridyl-N site-decked pores. Such trifunctionalization benefits this polymeric network exhibiting tandem alcohol oxidation-Knoevenagel condensation. In contrast to common metal-based catalysts, 1 represents a one of a kind metal-free alcohol oxidation reaction via extended π-cloud delocalization-mediated free radical pathway, as comprehensively supported from diverse control experiments. In addition to reasonable recyclability and broad substrate scope, the mild reaction condition underscores its applicability in benign synthesis of valuable product benzylidene malononitrile. Integration of 2,2'-bipyridyl units in this 2D COP favors anchoring non-noble metal ions to devise 1-M (M: Ni2+/ Co2+) that demonstrate outstanding electrochemical oxygen evolution reaction in alkaline media with high chronoamperometric stability. Electrochemical parameters of both 1-Co and 1-Ni outperform some benchmark, commercial, as well as a majority of contemporary OER catalysts. Specifically, the overpotential and Tafel slope (280 mV, 58 mV/dec) for 1-Ni is better than 1-Co (360 mV, 78 mV/dec) because of increased charge accumulation as well as a higher number of active sites compared to the former. In addition, the turnover frequency of 1-Ni is found to be 6 times higher than that of 1-Co and ranks among top-tier water oxidation catalysts. The results provide valuable insights in the field of metal-free tandem catalysis as well as promising electrochemical water splitting at the interface of task-specific functionality fuelling in polymeric organic networks.

RESUMEN

Addressing contemporary environmental and health concerns requires reducing pollutant emissions and converting them into less harmful or valuable compounds within the framework of the circular economy. Guefoam materials offer a promising solution by enabling the capture and pre-concentration of volatile organic compounds (VOCs), while facilitating the structuring of active phases for heterogeneous catalytic conversions. This study demonstrates the benefits of merging two newly designed electromagnetic induction-assisted ceramic matrix Guefoams into a portable integrated unit, synergizing the pre-concentration and chemical transformation of n-hexane, a VOC with special challenges. One Guefoam serves as an adsorbent, whereas the other plays a catalytic role. These Guefoams host guest phases, which consist of composite materials combining a steel core with magneto-inductive properties encased in a highly porous carbonaceous layer. This carbonaceous material undertakes a dual mission: adsorbing n-hexane from a nitrogen stream within the adsorptive Guefoam and, upon phosphorus doping in the catalytic Guefoam, orchestrating the metal-free selective dehydroaromatization of n-hexane into benzene. The design and integration of these novel Guefoam materials into a unified functional entity prove highly effective in pre-concentrating (enrichment factors up to 275) and catalyzing n-hexane with up to 84 % conversion and 94 % benzene selectivity while remaining energy-efficient and environmentally sustainable.

RESUMEN

The selective formation of antimony-carbon bonds via organic superbase catalysis under metal- and salt-free conditions is reported. This novel approach utilizes electron-deficient stibine, Sb(C6F5)3, to give upon base-catalyzed reactions with weakly acidic aromatic and heteroaromatic hydrocarbons access to a range of new aromatic and heteroaromatic stibines, respectively, with loss of C6HF5. Also, the significantly less electron-deficient stibines, Ph2SbC6F5 and PhSb(C6F5)2 smoothly underwent base-catalyzed exchange reactions with a range of terminal alkynes to generate the stibines of formulae PhSb(C≡CPh)2, and Ph2SbC≡CR [R=C6H5, C6H4-NO2, COOEt, CH2Cl, CH2NEt2, CH2OSiMe3, Sb(C6H5)2], respectively. These formal substitution reactions proceed with high selectivity as only the C6F5 groups serve as a leaving group to be liberated as C6HF5 upon formal proton transfer from the alkyne. Kinetic studies of the base-catalyzed reaction of Ph2SbC6F5 with phenyl acetylene to form Ph2SbC≡CPh and C6HF5 suggested the empirical rate law to exhibit a first-order dependence with respect to the base catalyst, alkyne and stibine. DFT calculations support a pathway proceeding via a concerted σ-bond metathesis transition state, where the base catalyst activates the Sb-C6F5 bond sequence through secondary bond interactions.

RESUMEN

Fluorinated arylborane-based Lewis acid catalysts have shown remarkable activity and serve as ideal examples of transition metal-free catalysts for diverse organic transformations. However, their homogeneous nature poses challenges in terms of recyclability and separation from reaction mixtures. This work presents an efficient technique for the heterogenization of boron Lewis acid catalysts by anchoring Piers' borane to allyl-functionalized iron oxide. This catalyst demonstrates excellent activity in the hydrosilylation of imines and the reductive amination of carbonyls using various silanes as reducing agents under mild reaction conditions. The catalyst exhibits broad tolerance towards a wide range of functional substrates. Furthermore, it exhibits good recyclability and can be easily separated from the products using an external magnetic field. This work represents a significant advance in the development of sustainable heterogenous metal-free catalysts for organic transformations.

RESUMEN

We have synthesized a quinone-incorporated bistriarylamine donor-acceptor-donor (D-A-D) semiconductor 1 by B(C6F5)3 (BCF) catalyzed C-H/C-H cross coupling via radical ion pair intermediates. Coordination of Lewis acids BCF and Al(ORF)3 (RF=C(CF3)3) to the semiconductor 1 afforded diradical zwitterions 2 and 3 by integer electron transfer. Upon binding to Lewis acids, the LUMO energy of 1 is significantly lowered and the band gap of the semiconductor is significantly narrowed from 1.93 eV (1) to 1.01 eV (2) and 1.06 eV (3). 2 and 3 are rare near-infrared (NIR) diradical dyes with broad absorption both centered around 1500 nm. By introducing a photo BCF generator, 2 can be generated by light-dependent control. Furthermore, the integer electron transfer process can also be reversibly regulated via the addition of CH3CN. In addition, the temperature of 2 sharply increased and reached as high as 110 °C in 10 s upon the irradiation of near-infrared-II (NIR-II) laser (1064 nm, 0.7 W cm-2), exhibiting a fast response to laser. It displays excellent photothermal stability with a photothermal (PT) conversion efficiency of 62.26 % and high-quality PT imaging.

RESUMEN

Cyclodextrin-based nanosponges are promising materials for heterogeneous catalysis due to their inherent synthetic versatility, tunable porosity and nontoxicity. In this work, a primary amine-rich ß-cyclodextrin nanosponge was synthesized via click imine condensation reaction between 1,6-hexamethylamine-functionalized ß-cyclodextrin (CDAM) and glutaraldehyde (GLT) to afford CDGLAM, in mild conditions. The crosslinked polymer exhibited a BET surface area of 36.39 m2 g-1, an average pore diameter of 3.09 nm (as assessed by the BJH method), and thermal stability up to 253 °C. CDGLAM was tested as heterogeneous catalyst for the metal-free Henry and Knoevenagel reactions, between aromatic aldehydes and nitromethane or ethyl cyanoacetate, respectively, affording the products in moderate to very high yields. These results show the ease of preparation of ß-CD-based nanosponges from a green chemistry perspective, as well as their potential for future use in catalytic systems.

RESUMEN

A simple and efficient method for the synthesis of diarylmethyl-functionalized anilines through the hexafluoroisopropanol (HFIP)-mediated regioselective 1,6-hydroarylation reaction of para-quinone methides (p-QMs) with anilines under catalyst- and additive-free conditions is reported. Various kinds of p-QMs and amines (e. g. primary, secondary and tertiary amines) are well tolerated in this transformation without the pre-protection of amino group, and the corresponding products could be generated with good to excellent yields and satisfactory regioselectivity under the optimized reaction conditions. In addition to adaptable amine compounds, indoles and their derivatives are also compatible with this reaction system. This transformation can be easily extended to a gram scale-synthesis level to synthesize the target product. Furthermore, it is worth noting that some complex small aniline molecules with biological activity can be selectively modified using this method. The possible reaction mechanism is proposed through the step-by-step control experiments and DFT calculations, showing that the key process for achieving the regioselective 1,6-hydroarylation of p-QMs is the hydrogen bonding effect of HFIP to substrates.

RESUMEN

Direct C-H methylation is a highly valuable approach for introducing methyl groups into organic molecules, particularly in pharmaceutical chemistry. Among the various methodologies available, photo-induced methylation stands out as an exceptional choice due to its mild reaction conditions, energy efficiency, and compatibility with functional groups. This article offers a comprehensive review of photochemical strategies employed for the direct and selective methylation of C(sp3 )-H, C(sp2 )-H, and C(sp)-H bonds in various organic molecules. The discussed methodologies encompass transition-metal-based photocatalysis, organophotocatalysis, as well as other metal-free approaches, including electron donor-acceptor (EDA)-enabled transformations. Importantly, a wide range of easily accessible agents such as tert-butyl peroxide, methanol, DMSO, methyl tert-butyl ether, TsOMe, N-(acetoxy)phthalimide, acetic acid, methyl halides, and even methane can serve as effective methylating reagents for modifying diverse targets. These advancements in photochemical C-H methylation are anticipated to drive further progress in the fields of organic synthesis, photocatalysis, and pharmaceutical development, opening up exciting avenues for creating novel organic molecules and discovering new drug compounds.

RESUMEN

Electro-enhanced metal-free boron/peroxymonosulfate (B/PMS) system has demonstrated potential for efficient metal-organic complexes degradation in an eco-friendly way. However, the efficiency and durability of the boron activator are limited by associated passivation effect. Additionally, the lack of suitable methods utilizing in-situ recovery of metal ions liberated from decomplexation causes huge resource waste. In this study, B/PMS coupled with a customized flow electrolysis membrane (FEM) system is proposed to address above challenges with Ni-EDTA used as the model contaminant. Electrolysis is confirmed to remarkably promote the activation performance of boron towards PMS to efficiently generate •OH which dominated Ni-EDTA decomplexation in the anode chamber. It is revealed that the acidification near the anode electrode improves the stability of boron by inhibiting passivation layer growth. Under optimal parameters (10 mM PMS, 0.5 g/L boron, initial pH = 2.3, current density = 68.87 A/m2), 91.8% of Ni-EDTA could be degraded in 40 min, with a kobs of 6.25 × 10-2 min-1. As the decomplexation proceeds, nickel ions are recovered in the cathode chamber with little interference from the concentration of co-existing cations. These findings provide a promising and sustainable strategy for simultaneous metal-organic complexes removal and metal resources recovery.

Asunto(s)

RESUMEN

The development and application of new organoboron reagents as Lewis acids in synthesis and metal-free catalysis have dramatically expanded over the past 20 years. In this context, we will show the recent uses of the simple and relatively weak Lewis acid BPh3-discovered 100 years ago-as a metal-free catalyst for various organic transformations. The first part will highlight catalytic applications in polymer synthesis such as the copolymerization of epoxides with CO2, isocyanate, and organic anhydrides to various polycarbonate copolymers and controlled diblock copolymers as well as alternating polyurethanes. This is followed by a discussion of BPh3 as a Lewis acid component in the frustrated Lewis pair (FLP) mediated cleavage of hydrogen and hydrogenation catalysis. In addition, BPh3-catalyzed reductive N-methylations and C-methylations with CO2 and silane to value-added organic products will be covered as well along with BPh3-catalyzed cycloadditions and insertion reactions. Collectively, this mini-review showcases the underexplored potential of commercially available BPh3 in metal-free catalysis.

RESUMEN

A chitosan-derived metal-free N-doped carbon catalyst was synthesized and investigated for selective reductive formylation of quinoline to N-formyl-tetrahydroquinoline and nitroarenes to N-formyl anilides via aqueous formic acid (FA)-mediated catalytic transformation. FA dissociated on the catalyst surface and acted as a hydrogenating and formylating source for selective N-formylation of N-heteroarenes. The carbonized catalyst prepared at 700 °C offered the best activity. A 92 % yield of N-formyl-tetrahydroquinoline after 14 h and >99 % yield for N-formyl anilide after 12 h at 160 °C were obtained. The excellent catalytic activity was correlated with the type of "N" species and the basicity of the catalyst. Density functional theory calculations revealed that a water-assisted FA decomposition pathway (deprotonation and dehydroxylation) generated the surface adsorbed -H and -HCOO species, required for the formation of N-formylated products. In addition, the selective formation of N-formyl-tetrahydroquinoline and N-formyl anilides was explained by a comprehensive reaction energetics analysis.

Asunto(s)

RESUMEN

A highly efficient and elegant diversity-oriented reaction paradigm employing atropaldehyde acetals as new dual C2/C3 synthons was developed under metal-free conditions using glycine esters as the counterpart reagents, which allowed rapid synthesis of two important nitrogen-containing heterocycles, pyrrolo[1,2-a]quinolines and 3,5-diarylpyridines. The divergent products are subtly controlled by the manipulation of the substitutional groups of glycine esters. When a N-arylglycine ester was used, pyrrolo[1,2-a]quinolines can be formed through cascade oxidative C-C cleavage/multiple cyclization. Instead, N-benzylglycine ester as the counter-reagent led to the synthesis of 3,5-diarylpyridines via two key C-N cleavages. Mild conditions, broad substrate scope, scalability and environmentally acceptable organic solvents rendered this method practical and attractive.

Asunto(s)

RESUMEN

Organocatalysis has evolved into an effective complement to metal- or enzyme-based catalysis in polymerization, polymer functionalization, and depolymerization. The ease of removal and greater sustainability of organocatalysts relative to transition-metal-based ones has spurred development in specialty applications, e.g., medical devices, drug delivery, optoelectronics. Despite this, the use of organocatalysis and other organomediated reactions in polymer chemistry is still rapidly developing, and we envisage their rapidly growing application in nascent areas such as controlled radical polymerization, additive manufacturing, and chemical recycling in the coming years. In this Review, we describe ten trending areas where we anticipate paradigm shifts resulting from novel organocatalysts and other transition-metal-free conditions. We highlight opportunities and challenges and detail how new discoveries could lead to previously inaccessible functional materials and a potentially circular plastics economy.

Asunto(s)

RESUMEN

The dehydrogenation of alkane feedstock to produce alkenes is a significant and energy intensive industrial process, generally occurring on metals and metal oxides. Here, we investigate a catalytic mechanism for the dehydrogenation of butane on single-layer, metal-free graphene using a combination of ab initio quantum chemical calculations and adsorption microcalorimetry. Dispersion-corrected Density Functional Theory (DFT) is employed to calculate transition states and energy minima that describe the reaction pathways connecting butane to the two possible products, but-1-ene and but-2-ene. The deprotonations occur with moderate energy barriers in the 0.54 eV-0.69 eV range. A strong agreement is observed between the results of the adsorption energies calculated by DFT (0.40 eV) and the measured differential heat of adsorption of n-butane on a graphitic overlayer. We conclude that the active-site for this catalytic reaction is a metal-free graphene vacancy, created by removing a carbon atom from a single-layer graphene sheet.

RESUMEN

Chemoselective reduction of nitroarenes to arylamines is a core technology for the synthesis of numerous chemicals. The technology, however, relies on applying precious noble metal catalysts. We present our findings on the development of robust nanoporous covalent triazine frameworks (CTFs) as metal-free catalysts for the green chemoselective reduction of nitroarenes. The turnover frequency is found to be 43.03 h-1, exceeding activities of the heteroatom-doped carbon nanomaterials by a factor of 30. The X-ray photoelectron spectroscopy and control experiments provide further insights into the nature of active species for prompt catalysis. This report confirms the importance of quaternary 'N' and 'F' atom functionalities to create active hydrogen species via charge delocalization as a critical step in improving the catalytic activity.

RESUMEN

In this work, activated carbon treated in N2 atmosphere, as a non-metallic catalyst, exhibits excellent catalytic performance in reduction of Cr (VI) to Cr (III) using HCOOH as the reducing agent at room temperature. A series of characterizations and control experiments were carried out to deduce the possible reaction mechanism. The results showed that the improved catalytic performance can be attributed to the enhanced graphitization degree and basic sites such as pyrone-like, which favor electron transferring and activation of reactant. The reaction rate constant observed herein for the C-800 was 22 and 6 times more than that for C-0 and Pd/C catalyst, respectively. In addition, C-800 showed good recycle performance, and no loss of activity was observed after 5 cycles. This study broadens the application of nonmetallic catalyst and provides an easy-available and cost-effective catalytic material for removing toxic Cr (VI).

RESUMEN

Ammonium, imidazole, or pyridinium functionalized ß-cyclodextrins (ß-CDs) were used as efficient one-component bifunctional catalysts for the coupling reaction of carbon dioxide (CO2) and epoxide without the addition of solvent and metal. The influence of different catalysts and reaction parameters on the catalytic performance were examined in detail. Under optimal conditions, Im-CD1-I catalysts functionalized with imidazole groups were able to convert various epoxides into target products with high selectivity and good conversion rates. The one-component bifunctional catalysts can also be recovered easily by filtration and reused at least for five times with only slight decrease in catalytic performance. Finally, a possible process for hydroxyl group-assisted ring-opening of epoxide and functionalized group- induced activation of CO2 was presented.

RESUMEN

Recently, metal-based carbon materials have been verified to be an effective persulfate activator, but secondary pollution caused by metal leaching is inevitable. Hence, a green metal-free 3D macroscopic N-doped porous carbon nanosheets (NPCN) was synthesized successfully. The obtained NPCN showed high adsorption capacity of tetracycline (TC) and excellent persulfate (PS) activation ability, especially when calcined at 700 °C (NPCN-700). The maximum adsorption capacity of NPCN-700 was 121.51 mg/g by H-bonds interactions. Moreover, the adsorption process followed pseudo-second-order kinetics model and Langmuir adsorption isotherm. The large specific surface area (365.27 mg/g) and hierarchical porous structure of NPCN-700 reduced the mass transfer resistance and increased the adsorption capacity. About 96.39% of TC was removed after adding PS. The effective adsorption of the catalyst greatly shortened the time for the target organic molecules to migrate to the catalyst. Moreover, the NPCN-700 demonstrated high reusability with the TC removal rate of 80.23% after 4 cycles. Quenching experiment and electron paramagnetic resonance (EPR) test confirmed the non-radical mechanism dominated by 1O2. More importantly, the C = O groups, defects and Graphitic N acted as active sites to generate 1O2. Correspondingly, electrochemical measurement revealed the direct electron transfer pathway of TC degradation. Finally, multiple degradation intermediates were recognized by the LC-MS measurement and three possible degradation pathways were proposed. Overall, the prepared NPCN had excellent application prospects for removal of antibiotics due to its remarkable adsorption and catalytic degradation capabilities.

Asunto(s)

RESUMEN

Herein, we report the first synthesis of colloidal C4 N quantum dots (QDs) and their functional composites and explore their optical activities and edge-selective polysulfide adsorption-catalysis. As-obtained C4 NQDs are rich in carbonyl groups and edges, allowing good solution processability and facile assembly with other moieties for creating functionalities. While C4 NQDs show normal fluorescence (FL), the QD/poly(vinyl alcohol) (PVA) composites give FL/room-temperature-phosphorescence (RTP) dual-mode emission, enabling the corresponding solution to be used as an encryption ink. The QDs anchored onto carbon nanotubes can be used as a barrier layer to decorate commercial separators, endowing a Li-S cell with excellent cycling stability, high rate capability, and large areal capacity. Computation and experiment studies show that edge sites in C4 N favor polysulfide adsorption and catalysis and the enriched edges and carbonyl groups in QDs synergically promotecatalytic conversion of sulfur species.

RESUMEN

The defluorosilylation of aryl fluorides to access aryl silanes was achieved under transition-metal-free conditions via an inert C-F bond activation. The defluorosilylation, mediated by silylboronates and KOtBu, proceeded smoothly at room temperature to afford various aryl silanes in good yields. Although a comparative experiment indicated that Ni catalyst facilitated this transformation more efficiently, the transition-metal-free protocol is advantageous from a green chemistry perspective.