RESUMEN

The present study examined the effects of mesoporous silica nanoparticles (MSNs) on its adsorption capacity of aflatoxin B1 (AFB1). Moreover, the study evaluated the toxicity of MSNs with AFB1 using NIH3T3 cells and hemolysis test. The obtained MSNs were spherical, irregular-like in shape, having a mean size of 39.97 ± 7.85 nm and a BET surface area of 1195 m2/g. At 0.1 mg mL-1 concentration of MSN, the AFB1 adsorption capacity was 30%, which reached 70% when the MSN concentration increased to 2.0 mg mL-1. Our findings showed that AFB1 was adsorbed (∼67%) in the first few minutes on being in contact with MSNs, reaching an adsorption capacity of ∼70% after 15 min. Thereafter, the adsorption capacity remained constant in solution, demonstrating that the MSNs adsorbed toxins even beyond overnight. MSN treatment (0.5-2.0 mg mL-1) using NIH3T3 cells did not result in any reduction in cell viability. In addition, MSN treatment completely reversed the cytotoxic effect of AFB1 at all concentrations. Hemolysis test also revealed no hemolysis in MSNs evaluated alone and in those combined with AFB1. To the best of our knowledge, this study is the first to demonstrate that MSN can reduce cell toxicity produced by AFB1 due to its potential to adsorb mycotoxins.

Asunto(s)

RESUMEN

This study describes the sustainable and eco-friendly synthesis of the silica-based mesoporous structure from the use of alternative amorphous silica extracted from rice husk ash (RHA). The mesoporous material was called MCM-48 (RHA), and its application as adsorbent to the antimony (Sb) remediation in environmental samples was tested. The adsorbent was prepared by an efficient and sustainable hydrothermal method, which exhibited an amorphous framework with type IV isotherms and type H1 hysteresis, and surface area, total pore volume, and pore diameter values of 820.9 m2 g-1, 0.6 cm3 g-1, and 3.7 nm, respectively. In addition, the MCM-48 (RHA) exhibited a three-dimensional cubic mesostructure (Ia3d space-group symmetry) with a narrow mesopore distribution, uniform spherical particles, and well-defined architecture. Multivariate optimization using a factorial design (24) was employed in the adsorption tests of Sb. The variables evaluated and the optimum conditions obtained were (i) adsorbent mass (45 mg); (ii) adsorption time (115 min); (iii) pH 2; and (iv) Sb initial concentration of 8 mol L-1. In these conditions, we found a maximum adsorption efficiency of Sb in the order of 95%. The adsorbent material proposed in this study proved to be efficient for Sb remediation in water samples under different experimental conditions. A total of five samples were analyzed and Sb concentrations on the order of 8 ppm were added, in which a removal efficiency of Sb raging between 88 and 96% was obtained for the remediation in real samples. In addition, the low cost of the synthesis of MCM-48 (RHA) in combination with its high and fast adsorption capacities offers a great promise for wastewater remediation, which makes it very attractive for environmental approaches.

Asunto(s)

RESUMEN

Abstract Enzymes immobilized onto substrates with excellent selectivity and activity show a high stability and can withstand extreme experimental conditions, and their performance has been shown to be retained after repeated uses. Applications of immobilized enzymes in various fields benefit from their unique characteristics. Common methods, including adsorption, encapsulation, covalent attachment and crosslinking, and other emerging approaches (e.g., MOFs) of enzyme immobilization have been developed mostly in recent years. In accordance with these immobilization methods, the present review elaborates the application of magnetic separable nanoparticles and functionalized SBA-15 and MCM-41 mesoporous materials used in the immobilization of enzymes.

Resumo Enzimas imobilizadas em substratos com excelente seletividade e atividade apresentam alta estabilidade e podem suportar condições experimentais extremas, e seu desempenho foi mantido após repetidos usos. As aplicações de enzimas imobilizadas em vários campos se beneficiam de suas características únicas. Métodos comuns, incluindo adsorção, encapsulamento, ligação covalente e reticulação, e outras abordagens emergentes (por exemplo, MOFs) de imobilização de enzima, foram desenvolvidos principalmente nos últimos anos. De acordo com esses métodos de imobilização, a presente revisão elabora a aplicação de nanopartículas magnéticas separáveis e materiais mesoporosos funcionalizados SBA-15 e MCM-41 usados na imobilização de enzimas.

RESUMEN

Enzymes immobilized onto substrates with excellent selectivity and activity show a high stability and can withstand extreme experimental conditions, and their performance has been shown to be retained after repeated uses. Applications of immobilized enzymes in various fields benefit from their unique characteristics. Common methods, including adsorption, encapsulation, covalent attachment and crosslinking, and other emerging approaches (e.g., MOFs) of enzyme immobilization have been developed mostly in recent years. In accordance with these immobilization methods, the present review elaborates the application of magnetic separable nanoparticles and functionalized SBA-15 and MCM-41 mesoporous materials used in the immobilization of enzymes.

Enzimas imobilizadas em substratos com excelente seletividade e atividade apresentam alta estabilidade e podem suportar condições experimentais extremas, e seu desempenho foi mantido após repetidos usos. As aplicações de enzimas imobilizadas em vários campos se beneficiam de suas características únicas. Métodos comuns, incluindo adsorção, encapsulamento, ligação covalente e reticulação, e outras abordagens emergentes (por exemplo, MOFs) de imobilização de enzima, foram desenvolvidos principalmente nos últimos anos. De acordo com esses métodos de imobilização, a presente revisão elabora a aplicação de nanopartículas magnéticas separáveis e materiais mesoporosos funcionalizados SBA-15 e MCM-41 usados na imobilização de enzimas.

Asunto(s)

RESUMEN

Enzymes immobilized onto substrates with excellent selectivity and activity show a high stability and can withstand extreme experimental conditions, and their performance has been shown to be retained after repeated uses. Applications of immobilized enzymes in various fields benefit from their unique characteristics. Common methods, including adsorption, encapsulation, covalent attachment and crosslinking, and other emerging approaches (e.g., MOFs) of enzyme immobilization have been developed mostly in recent years. In accordance with these immobilization methods, the present review elaborates the application of magnetic separable nanoparticles and functionalized SBA-15 and MCM-41 mesoporous materials used in the immobilization of enzymes.

Enzimas imobilizadas em substratos com excelente seletividade e atividade apresentam alta estabilidade e podem suportar condições experimentais extremas, e seu desempenho foi mantido após repetidos usos. As aplicações de enzimas imobilizadas em vários campos se beneficiam de suas características únicas. Métodos comuns, incluindo adsorção, encapsulamento, ligação covalente e reticulação, e outras abordagens emergentes (por exemplo, MOFs) de imobilização de enzima, foram desenvolvidos principalmente nos últimos anos. De acordo com esses métodos de imobilização, a presente revisão elabora a aplicação de nanopartículas magnéticas separáveis e materiais mesoporosos funcionalizados SBA-15 e MCM-41 usados na imobilização de enzimas.

Asunto(s)

RESUMEN

Enzymes immobilized onto substrates with excellent selectivity and activity show a high stability and can withstand extreme experimental conditions, and their performance has been shown to be retained after repeated uses. Applications of immobilized enzymes in various fields benefit from their unique characteristics. Common methods, including adsorption, encapsulation, covalent attachment and crosslinking, and other emerging approaches (e.g., MOFs) of enzyme immobilization have been developed mostly in recent years. In accordance with these immobilization methods, the present review elaborates the application of magnetic separable nanoparticles and functionalized SBA-15 and MCM-41 mesoporous materials used in the immobilization of enzymes.(AU)

Enzimas imobilizadas em substratos com excelente seletividade e atividade apresentam alta estabilidade e podem suportar condições experimentais extremas, e seu desempenho foi mantido após repetidos usos. As aplicações de enzimas imobilizadas em vários campos se beneficiam de suas características únicas. Métodos comuns, incluindo adsorção, encapsulamento, ligação covalente e reticulação, e outras abordagens emergentes (por exemplo, MOFs) de imobilização de enzima, foram desenvolvidos principalmente nos últimos anos. De acordo com esses métodos de imobilização, a presente revisão elabora a aplicação de nanopartículas magnéticas separáveis e materiais mesoporosos funcionalizados SBA-15 e MCM-41 usados na imobilização de enzimas.(AU)

Asunto(s)

RESUMEN

BACKGROUND: Cumulative reported evidence has indicated that renewable feedstocks are a promising alternative source to fossil platforms for the production of fuels and chemicals. In that regard, the development of new, highly active, selective, and easy to recover and reuse catalysts for biomass conversions is urgently needed. The combination of enzymatic and inorganic heterogeneous catalysis generates an unprecedented platform that combines the advantages of both, the catalytic efficiency and selectivity of enzymes with the ordered structure, high porosity, mechanical, thermal and chemical resistance of mesoporous materials to obtain enzymatic heterogeneous catalysts. Enzymatic mineralization with an organic silicon precursor (biosilicification) is a promising and emerging approach for the generation of solid hybrid biocatalysts with exceptional stability under severe use conditions. Herein, we assessed the putative advantages of the biosilicification technology for developing an improved efficient and stable biocatalyst for sustainable biofuel production. RESULTS: A series of solid enzymatic catalysts denominated LOBE (low ordered biosilicified enzyme) were synthesized from Pseudomonas fluorescens lipase and tetraethyl orthosilicate. The microscopic structure and physicochemical properties characterization revealed that the enzyme formed aggregates that were contained in the heart of silicon-covered micelles, providing active sites with the ability to process different raw materials (commercial sunflower and soybean oils, Jatropha excisa oil, waste frying oil, acid oil from soybean soapstock, and pork fat) to produce first- and second-generation biodiesel. Ester content ranged from 81 to 93% wt depending on the raw material used for biodiesel synthesis. CONCLUSIONS: A heterogeneous enzymatic biocatalyst, LOBE4, for efficient biodiesel production was successfully developed in a single-step synthesis reaction using biosilicification technology. LOBE4 showed to be highly efficient in converting refined, non-edible and residual oils (with high water and free fatty acid contents) and ethanol into biodiesel. Thus, LOBE4 emerges as a promising tool to produce second-generation biofuels, with significant implications for establishing a circular economy and reducing the carbon footprint.