RESUMEN

A transistor inspired by biological systems, which possesses synaptic and sensing capabilities, has demonstrated significant promise in the field of neuromorphic electronics and sensory systems resembling the human brain. Despite the remarkable advancements in emulating neuromorphic operations, the development of a synaptic FET with a bionic architecture, extended lifespan, minimal energy usage, and marker monitoring capability remains challenging. In this work, a synaptic transistor based on NiAl-layer double hydroxides nanosheets is reported. The synaptic transistor exhibits a significant ratio of on/off current (1.35×107) and possesses a high transconductance value (10.05 mS). The successful emulation included key synaptic characteristics, such as excitatory/inhibitory postsynaptic current, paired-pulse facilitation/depression, short-term plasticity spike amplitude-dependent plasticity, spike timing-dependent plasticity, as well as spike number-dependent plasticity. A consumption of 64.8 pJ per spike was achieved as a result of the efficient carrier transfer pathway facilitated by the nanosheets composed of double hydroxides. In addition, the FET's linear detection region (with a coefficient R2=0.811) encompassed atrazine concentrations ranging from 10 pg/mL to 0.1 µg/mL, thanks to its high surface area and significant transconductance. Therefore, this study presents a potential approach for achieving energy-efficient neuromorphic computing and high-performance synaptic devices.

RESUMEN

With a rapid increase in industrial growth around the world, the demand for an entirely novel category of nanoparticles and technologies for wastewater treatment has become a key concern for environmental protection. Recently, hybrids of layered double hydroxides (LDH), particularly those containing LDH, have gained attention as potential nanoscale adsorbents for water treatment. Recent research has shown that LDH-containing composites are interesting versatile materials with the ability to be used in energy storage, photocatalysis, nanocomposites, and water treatment. In the current work, LDH-containing composites were utilized as adsorbents for the purpose of purifying water. The adsorbents investigated are Zn-Co-Fe/LDH/Chitosan-in situ sample preparation (LDH/CS1) and Zn-Co-Fe/LDH/Chitosan-ex situ sample preparation (LDH/CS2). Furthermore, LDH/CS1 and LDH/CS2 were investigated for wastewater treatment from methyl orange dye (MO) with various adsorption conditions. When the initial MO concentration was 20 mg/L and the amount of adsorbent was 0.1 g, the removal efficiency reached 72.8 and 91.7% for LDH/CS1 and LDH/CS2, respectively. The MO's maximum adsorption capabilities are 160.78 and 165.89 mg/g for LDH/CS1 and LDH/CS2, respectively, which is much greater than that of comparable commercial adsorbents. MO adsorption onto LDH/CS1 and LDH/CS2 was best characterized by the pseudo-second-order kinetic model. The equilibrium adsorption data was followed by the Freundlich and Langmuir models. The adsorption is favorable as evidenced by the equilibrium parameter RL values for MO adsorption onto LDH/CS1 and LDH/CS2, which were 0.227 and 0.144, respectively. Using the free volume distribution method and the positron annihilation lifetime technique, the nanostructure of the materials was examined.

RESUMEN

Cationic synthetic dyes are one of the hazards in aqueous solutions that can affect the health of humans and living organisms. In the current work, polyacrylamide (PAM)-g-gelatin hydrogel and modified PAM-g-gelatin hydrogel using activated carbon of Luffa cylindrica (ACL) and ACL/Mg-Fe LDH were applied to eliminate crystal violet (CV), a cationic dye, from water media. The hydrogels were synthesized using free radical polymerization approach, and the hydrogels were characterized using FTIR, XRD, TGA-DTG, BET, SEM, and EDX-Map. The surface area of ACL, ACL/Mg-Fe LDH, PAM-g-gelatin, PAM-g-gelatin/ACL, and PAM-g-gelatin/ACL/Mg-Fe LDH were 99.71, 141.99, 0.74, 1.47, and 1.65 m2/g, respectively, which shows that the presence of ACL and ACL/Mg-Fe LDH improved the area of the hydrogels. The maximum abatement of CV using PAM-g-gelatin (92.81%), PAM-g-gelatin/ACL (95.71%), and PAM-g-gelatin/ACL/Mg-Fe LDH (98.25%) was obtained at pH = 9, temperature 25 °C, 10 mg/L CV, 60 min time, and adsorber dose of 2 g/L (for PAM-g-gelatin) and 1.5 g/L (other samples). The value of thermodynamic factors confirmed that the abatement process is exothermic and spontaneous. The kinetics data followed the pseudo-second kinetic (PSO) model. The Langmuir isotherm model had a more remarkable ability to describe the equilibrium data. The maximum adsorption capacity for PAM-g-gelatin, PAM-g-gelatin/ACL, and PAM-g-gelatin/ACL/Mg-Fe LDH was determined 35.45, 39.865, and 44.952 mg/g, respectively. Generally, the studied hydrogels can eliminate dyes from wastewater and be used as effective adsorbers.

Asunto(s)

RESUMEN

Layered double hydroxide (LDH) is an applicable material that can be modified in various ways. Modifications using natural extracts fulfill the principles of "green chemistry." The preparation of butterfly pea flower extract (BPE)-modified NiAl LDH was completed using the calcination and restacking method. The characteristics of the prepared composites were identified through analysis of functional groups, crystal phase, bandgap energy, surface area and surface morphology. Fourier transform-infrared (FT-IR) characterization revealed that the active group of the catalyst is -OH except for NiAl layered double oxide (LDO), which has the metal oxide-like functional groups. X-ray diffraction patterns expressed a typical layered material structure of NiAl LDH dan NiAl LDH-BPE, but not for NiAl LDO and NiAl LDO-BPE. Introducing BPE into NiAl LDH and NiAl LDO effectively decreased the bandgap energy and changed the surface morphology. The prepared catalysts were applied in a batch system with pH 5 to degrade tetracycline (TC). NiAl LDO demonstrated the highest activity as a catalyst in TC degradation, with a 93.61% degradation rate. In contrast, NiAl LDO-BPE demonstrated the highest structural stability in TC degradation and repeated use, with an initial degradation percentage of 82.58% and a fifth regeneration percentage of 71.4%.

Asunto(s)

RESUMEN

Supported noble metal nanoparticles (NMNPs) are appealing for energy and environment catalysis. To facilitate the loading of NMNPs, in situ reduction of Mn+ on the support with extra reductants/surfactants is adopted, but typically results in aggregated NMNPs with uneven size distributions or blocked active sites of the NMNPs. Herein, the use of cobalt layered double hydroxide (Co-LDH) is proposed as both support and reductant for the preparation of supported NMNPs with ultrasmall sizes and even distributions. The resultant Co-LDH-supported NMNPs exhibit excellent catalytic performance and stability. For example, Ir/Co-LDH displays a low overpotential of 188 mV (10 mA cm-2) for electrocatalytic oxygen evolution reaction and a long-term stability over 100 h (100 mA cm-2) in overall water splitting. Ru/Co-LDH can achieve a 4-nitrophenol reduction with high rate of 0.36 min-1 and S2- detection with low limit of detection (LOD) of 0.34 µm. Overall, this work provides a green and effective strategy to fabricate supported NMNPs with greatly improved catalytic performances.

RESUMEN

Layered double hydroxides (LDH) are regarded as attractive pseudocapacitive materials due to their impressive capacitive qualities that may be adjustable to their morphological features. However, the layered structure of LDH renders them susceptible to structural aggregation, which inhibits effective electrolyte transport and limits their practical applicability after limited exposure to active areas. Herein, we propose a simple template-free strategy to synthesize hierarchical hollow sphere NiMn-LDH material with high surface area and exposed active as anode material for supercapacitor application. The template-free approach enables the natural nucleation of Ni-Mn ions resulting in thin sheets that self-assemble into a hollow sphere, offering expended interlayer spaces and abundant redox-active active sites. The optimal NiMn-LDH-12 achieved a specific capacitance of 1010.4 F g-1 at a current density of 0.2 A g-1 with capacitance retention of 70% at 5 A g-1 after 5000 cycles with lower charge transfer impedance. When configured into an asymmetric supercapacitors (ASC) device as NiMn-LDH//AC, the material realized a specific capacitance of 192.4 F g-1 at a current density of 0.2 A g-1 with a good energy density of 47.9 Wh kg-1 and a power density of 196.8 W kg-1. The proposed morphological-tuning route is promising for designing template-free NiMn-LDHs spheres with practical pseudocapacitive characteristics.

RESUMEN

Anodic urea oxidation reaction (UOR) is an intriguing half reaction that can replace oxygen evolution reaction (OER) and work together with hydrogen evolution reaction (HER) toward simultaneous hydrogen fuel generation and urea-rich wastewater purification; however, it remains a challenge to achieve overall urea electrolysis with high efficiency. Herein, we report a multifunctional electrocatalyst termed as Rh/NiV-LDH, through integration of nickel-vanadium layered double hydroxide (LDH) with rhodium single-atom catalyst (SAC), to achieve this goal. The electrocatalyst delivers high HER mass activity of 0.262 A mg-1 and exceptionally high turnover frequency (TOF) of 2.125 s-1 at an overpotential of 100 mV. Moreover, exceptional activity toward urea oxidation is addressed, which requires a potential of 1.33 V to yield 10 mA cm-2, endorsing the potential to surmount the sluggish OER. The splendid catalytic activity is enabled by the synergy of the NiV-LDH support and the atomically dispersed Rh sites (located on the Ni-V hollow sites) as evidenced both experimentally and theoretically. The self-supported Rh/NiV-LDH catalyst serving as the anode and cathode for overall urea electrolysis (1 mol L-1 KOH with 0.33 mol L-1 urea as electrolyte) only requires a small voltage of 1.47 V to deliver 100 mA cm-2 with excellent stability. This work provides important insights into multifunctional SAC design from the perspective of support sites toward overall electrolysis applications.

Asunto(s)

RESUMEN

The universal limit on the pH conditions is disturbing peroxymonosulfate (PMS)-triggered high-valent iron-oxo systems in environmental applications. Here, we propose for the first time the construction of a neutral microenvironment on the surface of Zn-Fe layered double hydroxide (ZnFe-LDH) by using the amphoteric properties of zinc hydroxide, which continuously generates ≡FeIV =O over a wide pH range of 3.0-11.0 in activating PMS. The ≡Zn(OH)2 moiety offers a neutral microenvironment at the phase interface, which mitigates the self-decomposition of ≡FeIV =O by protons and the hydrolysis reaction of iron by hydroxyl groups, which is supported by the Mossbauer spectra, density functional theory calculations and designed experiments. Consequently, ZnFe-LDH/PMS can satisfy the stability in long-term experiments, selectivity under conditions with high salinity or natural organic matter and efficient treatment of actual wastewater.

RESUMEN

Diamine oxydase and peroxidase have been co-immobilized onto layered double hydroxide (LDH) thin films for the development of real-time histamine biosensors. The chosen LDH materials are Mg2AlCO3, Mg4FeCl and Ca2AlCl. Prepared bi-enzymatic hybrid nanomaterials are capable of detecting histamine through the electrochemical oxidation of H2O2 and are used as the sensitive membrane for potentiometric microelectrode. Histamine biosensors developed in this work have fast response of less than 20 s, are sensitive and selective, with a large dynamic range of 10-8-10-3 M and a limit of detection of less than 10-8 M. The detection limit of the developed bi-enzymatic biosensors is relatively higher than those corresponding with gas and liquid chromatography, which are still considered as the reference methods. Finally, the reproducibility, the specificity and the storage stability of the biosensors were studied.

RESUMEN

The goal of this study was to investigate the effect of the structure of Mn-Al layered double hydroxide (LDH) on the adhesion behavior of composite adhesives on two Al alloys (L3005 and L8079). The composite adhesives were made out of the UV-curing Bisphenol A glycidylmethacrylate/triethylene glycol dimethacrylate (BT) as polymer matrix and the addition of 1, 3, and 5 wt. % of Mn-Al LDH as adhesion enhancers. Adhesion was evaluated by using the micro Vickers hardness testing procedure. The wetting angle of composite adhesives to the Al substrates was measured and compared to the adhesion parameter b obtained from the microhardness tests. The highest increase in adhesion was observed for BT with 5 wt. % of Mn-Al LDH on L3005 substrate, which was more than 15 times higher than the adhesion for the neat BT. The morphological segregation of composite adhesives after the contact with Al substrates was examined by optical microscopy and a higher compatibility of Mn-Al LDH particles with L3005 substrate was found. The methods used for the adhesion properties assessment suggested that the Mn-Al LDH was the best adhesion enhancer of the BT matrix for L3005 substrate containing a higher content of Mn and surface hydroxyl groups.

RESUMEN

In this study, a new efficient adsorbent of Co-Fe-layered double hydroxides@metal-organic framework (Co-Fe-LDH@UiO-66-NH2) was synthesized and used for extraction of methylene blue (MB) and methylene red (MR) from water samples prior to their determination by UV-Vis spectrophotometer. The adsorbent was characterized by Fourier Transform Infrared Spectroscopy (FT-IR), Scanning Electron Microscopy (SEM), Energy Dispersive X-Ray (EDX), X-ray Diffraction (XRD), and Brunauer-Emmett-Teller (BET) analyses. The impact of various parameters such as pH of the aqueous phase, extraction time, amount of adsorbent, type and volume of eluent solvent, desorption time, and sample volume were studied. The maximum extraction recovery was obtained at an optimized pH 8.0 and extraction time 10.0 min. The adsorption process was fitted by the Langmuir model with a maximum adsorption capacity of 555.62 mg/g and 588.2 mg/g, respectively, for MB and MR. Under optimum conditions, the limit of detection (LOD) for MB was 0.7 µgL-1 and 0.9 µgL-1 for MR. Furthermore, the Co-Fe-LDH@UiO-66-NH2 composite showed high efficiency for the removal of the analytes from environmental water samples.

RESUMEN

Magnesium (Mg) and its alloys have been suggested as revolutionary biodegradable materials. However, fast degradation hinders its clinic application. To improve the corrosion resistance and biocompatibility of Mg-Nd-Zn-Zr alloy (JDBM), magnesium-aluminum-layered double hydroxide (Mg-Al LDH) was successfully introduced into Mg(OH)2 coating by hydrothermal treatment. The anions in the interlayer of Mg-Al LDH can be replaced by chloride ions, resulting in a relatively low chloride ion concentration near the surface of the coating. The favorable corrosion resistance of the coating was proved by polarization curves and hydrogen collection test. The Mg-Al LDH significantly promoted cell adhesion, migration and proliferation in vitro. In addition, the coating almost fulfilled the request of the clinical application in the hemolysis ratio test. Finally, in vivo results indicated that the coating offered the greatest long-lasting protection from corrosion and triggered the mildest inflammation comparing to the pure Mg(OH)2 coatings and untreated magnesium alloy. Mg(OH)2 coating containing Mg-Al LDH in the present study shows a promising application in improving anticorrosion and biocompatibility of Mg alloys, and might act as a platform for a further modification of Mg alloys ascribed to its special layer structure.

Asunto(s)