RESUMEN

Soil contamination by petroleum, including crude oil from various sources, is increasingly becoming a pressing global environmental concern, necessitating the exploration of innovative and sustainable remediation strategies. The present field-scale study developed a simple, cost-effective microbial remediation process for treating petroleum-contaminated soil. The soil treatment involves adding microbial activators to stimulate indigenous petroleum-degrading microorganisms, thereby enhancing the total petroleum hydrocarbons (TPH) degradation rate. The formulated microbial activator provided a growth-enhancing complex of nitrogen and phosphorus, trace elements, growth factors, biosurfactants, and soil pH regulators. The field trials, involving two 500 m3 soil samples with the initial TPH content of 5.01% and 2.15%, were reduced to 0.41% and 0.02% in 50 days, respectively, reaching the national standard for cultivated land category II. The treatment period was notably shorter than the commonly used composting and bioaugmentation methods (typically from 8 to 12 weeks). The results indicated that the activator could stimulate the functional microorganisms in the soil and reduce the phytotoxicity of the contaminated soil. After 40 days of treatment, the germination rate of rye seeds increased from 20 to 90%, indicating that the microbial activator could be effectively used for rapid on-site remediation of oil-contaminated soils.

Asunto(s)

RESUMEN

Indigenous soil microbial communities play a pivotal role in the in situ bioremediation of contaminated sites. However, research on the distribution characteristics of microbial communities at various soil depths remains limited. In particular, there is little information on the assembly of microbial communities, especially those with degradation potential, in the vadose and saturated zones of hydrocarbon-contaminated sites. In this study, 18 soil samples were collected from the vadose zone and saturated zone at a long-term hydrocarbon-contaminated site. The diversity, composition, and driving factors of assembly of the soil bacterial community were determined by high-throughput sequencing analysis. Species richness and diversity were significantly higher in the vadose zone soils than in the saturated zone soils. Significant differences in abundance at both the phylum and genus levels were observed between the two zones. Soil bacterial community assembly was driven by the combination of pollution stress and nutrients in the vadose zone but by nutrient limitations in the saturated zone. The abundance of dechlorinating bacteria was greater in the saturated zone soils than in the vadose zone soils. Compared with contaminant concentrations, nutrient levels had a more pronounced impact on the abundance of dechlorinating bacteria. In addition, the interactions among dechlorinating bacterial populations were stronger in the saturated zone soils than in the vadose zone soils. These findings underscore the importance of comprehensively understanding indigenous microbial communities, especially those with degradation potential, across different soil layers to devise specific, effective in situ bioremediation strategies for contaminated sites.

Asunto(s)

RESUMEN

Anthropogenic sulfate loading into otherwise low-sulfate freshwater systems can cause significant ecological consequences as a biogeochemical stressor. To address this challenge, in situ bioremediation technologies have been developed to leverage naturally occurring microorganisms that transform sulfate into sulfide rather than implementing resource-intensive physio-chemical processes. However, bioremediation technologies often require the supply of electron donors to facilitate biological sulfate reduction. Bioelectrochemical systems (BES) can be an alternative approach for supplying molecular hydrogen as an electron donor for sulfate-reducing bacteria through water electrolysis. Although the fundamental mechanisms behind BESs have been studied, limited research has evaluated the design and operational parameters of treatment systems when developing BESs on a scale relevant to environmental systems. This study aimed to develop an application-based mathematical model to evaluate the performance of BESs across a range of reactor configurations and operational modes. The model was based on sulfate transformation by hydrogenotrophic sulfate-reducing bacteria coupled with the recovery of solid iron sulfide species formed by the oxidative dissolution of dissolved ferrous iron from a stainless steel anode. Sulfate removal closely corresponded to the rate of electrolytic hydrogen production and hydraulic residence time but was less sensitive to specific microbial rate constants. The mathematical model results were compared to experimental data from a pilot-scale BES tested with nonacidic mine drainage as a case study. The close agreement between the mathematical model and the pilot-scale BES experiment highlights the efficacy of using a mathematical model as a tool to develop a conceptual design of a scaled-up treatment system.

Asunto(s)

RESUMEN

In situ aerobic cometabolism of groundwater contaminants has been demonstrated to be a valuable bioremediation technology to treat many legacy and emerging contaminants in dilute plumes. Several well-designed and documented field studies have shown that this technology can concurrently treat multiple contaminants and reach very low cleanup goals. Fundamentally different from metabolism-based biodegradation of contaminants, microorganisms that cometabolically degrade contaminants do not obtain sufficient carbon and energy from the degradation process to support their growth and require an exogenous growth supporting primary substrate. Successful applications of aerobic cometabolic treatment therefore require special considerations beyond conventional in situ bioremediation, such as competitive inhibition between growth-supporting primary substrate(s) and contaminant non-growth substrates, toxic effects resulting from contaminant degradation, and differences in microbial population dynamics exhibited by biostimulated indigenous consortia versus bioaugmentation cultures. This article first provides a general review of microbiological factors that are likely to affect the rate of aerobic cometabolic biodegradation. We subsequently review fourteen well documented field-scale aerobic cometabolic bioremediation studies and summarize the underlying microbiological factors that may affect the performance observed in these field studies. The combination of microbiological and engineering principles gained from field testing leads to insights and recommendations on planning, design, and operation of an in situ aerobic cometabolic treatment system. With a vision of more aerobic cometabolic treatments being considered to tackle large, dilute plumes, we present several novel topics and future research directions that can potentially enhance technology development and foster success in implementing this technology for environmental restoration.

Asunto(s)

RESUMEN

Pollutions on and within the underground poses risks for groundwater contamination and is a widespread global problem. Common remediation methods based on digging and removal can be expensive and have limitations, while in-situ remediation is an attractive alternative. However, there is a need to develop tools to monitor the effectiveness both in terms of the successful injection of remediation fluids but also the effectiveness of the treatment, i.e., degree of degradation/removal of the pollutants and possible metabolites. This paper presents a methodology for monitoring the changes following an in-situ remediation treatment of a site contaminated with chlorinated solvents. The methodology consists of two different methods, where Direct Current resistivity and time-domain Induced Polarization (DCIP) was used to acquire daily data and geochemical analyses on water samples were collected approximately every three months. The geophysical results provide insights on how the injected fluids are spreading and assist in acquiring a better understanding of the geological and hydrogeological system. On the other hand, the geochemical sampling enhances our knowledge about the hydrochemistry of the system and the concentration of the pollutants. Our research highlights the challenges of monitoring in-situ bioremediation experiments in complex environments and in cases where pollutants are situated in low hydraulic conductivity formations. The joint interpretation of the data shows the importance of an interdisciplinary approach to understand complex systems.

RESUMEN

Petroleum hydrocarbon-contaminated groundwater often has a low indigenous microorganism population and lacks the necessary nutrient substrates for biodegradation reaction, resulting in a weak natural remediation ability within the groundwater ecosystem. In this paper, we utilized the principle of petroleum hydrocarbon degradation by microorganisms to identify effective nutrients (NaH2PO4, K2HPO4, NH4NO3, CaCl2, MgSO4·7H2O, FeSO4·7H2O, and VB12) and optimize nutrient substrate allocation through a combination of actual surveys of petroleum hydrocarbon-contaminated sites and microcosm experiments. Building on this, combining biostimulation and controlled-release technology, we developed a biodegradable chitosan-based encapsulated targeted biostimulant (i.e., YZ-1) characterized by easy uptake, good stability, controllable slow-release migration, and longevity to stimulate indigenous microflora in groundwater to efficiently degrade petroleum hydrocarbon. Results showed that YZ-1 extended the active duration of nutrient components by 5-6 times, with a sustainable release time exceeding 2 months. Under YZ-1 stimulation, microorganisms grew rapidly, increasing the degradation rate of petroleum hydrocarbon (10 mg L-1) by indigenous microorganisms from 43.03% to 79.80% within 7 d. YZ-1 can easily adapt to varying concentrations of petroleum hydrocarbon-contaminated groundwater. Specifically, in the range of 2-20 mg L-1 of petroleum hydrocarbon, the indigenous microflora was able to degrade 71.73-80.54% of the petroleum hydrocarbon within a mere 7 d. YZ-1 injection facilitated the delivery of nutrient components into the underground environment, improved the conversion ability of inorganic electron donors/receptors in the indigenous microbial community system, and strengthened the co-metabolism mechanism among microorganisms, achieving the goal of efficient petroleum hydrocarbon degradation.

Asunto(s)

RESUMEN

Phytoextraction with Sedum plumbizincicola is an in-situ, environmentally friendly and highly efficient remediation technique for slightly Cd-polluted soils but it remains a challenge to remediate highly Cd-polluted soils under field conditions. Here, an 8-ha field experiment was conducted to evaluate the feasibility of repeated phytoextraction by S. plumbizincicola of a highly Cd-polluted acid agricultural soil (pH 5.61, [Cd] 2.58 mg kg-1) in Yunnan province, southwest China. Mean shoot dry biomass production, Cd concentration and Cd uptake were 1.95 t ha-1, 170 mg kg-1 and 339 g ha-1 at the first harvest, and 0.91 t ha-1, 172 mg kg-1 and 142 g ha-1 at the second harvest. After two seasons of phytoextraction, soil total and CaCl2-extractable Cd concentrations decreased from 2.58 ± 0.69 to 1.53 ± 0.43 mg kg-1 and 0.22 ± 0.12 to 0.14 ± 0.07 mg kg-1, respectively. Stepwise multiple linear regression analysis shows that the shoot Cd concentration and uptake of S. plumbizincicola were positively related to soil CaCl2-extractable Cd concentrations, especially in the first crop. A negative relationship indicates that soil organic matter content played an important role in soil Cd availability and shoot Cd concentration in the first crop. In addition, the rhizosphere effect on soil CaCl2-extractable Cd concentration was negatively correlated with soil pH in the first crop. The accuracy of the calculation of soil Cd phytoextraction efficiency at field scale depends on all of the following factors being considered: shoot Cd uptake, cropping pattern, standardized sampling points, and the leaching and surface runoff of Cd. Phytoextraction with S. plumbizincicola is a feasible technique for efficient Cd removal from highly polluted soils and wide variation in soil properties can influence phytoextraction efficiency at the field scale.

Asunto(s)

RESUMEN

Due to low consumption and high efficiency, in situ microbial remediation of petroleum hydrocarbons (PHs)-contaminated sites in in-service petrochemical enterprises has attracted more and more attention. In this study, a degrading strain was isolated from oil depot–contaminated soil with soil extract (PHs) as the sole carbon source, identified and named Rhodococcus sp. OBD-3. Strain OBD-3 exhibited wide adaptability and degradability over a wide range of temperatures (15–37 °C), pH (6.0–9.0), and salinities (1–7% NaCl) to degrade 60.6–86.6% of PHs. Under extreme conditions (15 °C and 3–7% salinity), PHs were degraded by 60.6 ± 8.2% and more than 82.1% respectively. In OBD-3, the alkane monooxygenase genes alkB1 and alkB2 (GenBank accession numbers: MZ688386 and MZ688387) were found, which belonged to Rhodococcus by sequence alignment. Moreover, strain OBD-3 was used in lab scale remediation in which the contaminated soil with OBD-3 was isolated as the remediation object. The PHs were removed at 2,809 ± 597 mg/kg within 2 months, and the relative abundances of Sphingobium and Pseudomonas in soil increased more than fivefold. This study not only established a system for the isolation and identification of indigenous degrading strains that could efficiently degrade pollutants in the isolated environment but also enabled the isolated degrading strains to have potential application prospects in the in situ bioremediation of PHs-contaminated soils.(AU)

Asunto(s)

RESUMEN

Biogeochemical reduction and mobilization of sediment-bound arsenic (As) is the major concern for widespread groundwater As contamination in the middle Gangetic plains. The present work examines a microcosm based bio-stimulation study and substrate amendments over 45 days to analyze the bacterial community structure and distribution to indicate the possible in-situ bioremediation strategy in the area. Initially, Bacterial phyla Proteobacteria was predominantly present in all the samples, followed by Actinobacteria, Bacteroidetes, and Firmicutes whereas Cyanobacteria was noted as the minor group. In genus level, Delftia, Acinetobacter, Lysobacter, Bacillus, and Pseudomonas were the major groups of bacteria in the As-rich aquifer system, while Planctomycetes dominated the bio-stimulated samples, followed by a minute portion of Proteobacteria. Alpha diversity and Chaol curve further determined the species richness in the samples with an As tolerant capacity of 152.28 ppb. The presence of γ-Proteobacteria as the dominating member in high As-content water indicated their predominant role in As mobilization, whereas, dominance of α-Proteobacterial members in low As-content water indicated their involvement in As detoxification. The complete change in microbial community structure within the bio-stimulated conditions indicated the extensive role of arsenite-oxidizing microbial communities within different levels of As-contaminated areas in Bihar that will enlighten the significant role of these communities in As-biogeochemical cycle. Supplementary Information: The online version contains supplementary material available at 10.1007/s13205-023-03612-0.

RESUMEN

Chlorinated solvents are widespread subsurface contaminants that are often present as complex mixtures. Complete biodegradation of mixed chlorinated solvents remains challenging because the optimal redox conditions for biodegradation of different chlorinated solvents differ significantly. In this study, anaerobic and aerobic conditions were integrated by electrolysis coupled with groundwater circulation for biodegradation of a mixture of chloroform (CF, 8.25 mg/L), 1,2-dichloroethane (DCA, 7.01 mg/L), and trichloroethylene (TCE, 4.56 mg/L). A two-dimensional tank was filled with field sandy and silty-clayed sediments to simulate aquifer conditions, a pair of electrodes was installed between an injection well and abstraction well, and groundwater circulation transported cathodic H2 and anodic O2 to produce multiple redox conditions. Microbial community analysis demonstrated that the system constructed a habitat suitable for the co-existence of aerobic and anaerobic microbes. After 50 days of treatment, 93.1%, 100%, and 87.3% of CF, 1,2-DCA, and TCE were removed without observed intermediates, respectively. Combined with compound specific isotope analysis, the degradation of 1,2-DCA and CF was mainly attributed to aerobic oxidation and reductive dechlorination, respectively, and TCE was removed by both aerobic and anaerobic biodegradation. Our findings provide a new and efficient strategy for in situ bioremediation of groundwater contaminated by mixed chlorinated solvents.

Asunto(s)

RESUMEN

Due to low consumption and high efficiency, in situ microbial remediation of petroleum hydrocarbons (PHs)-contaminated sites in in-service petrochemical enterprises has attracted more and more attention. In this study, a degrading strain was isolated from oil depot-contaminated soil with soil extract (PHs) as the sole carbon source, identified and named Rhodococcus sp. OBD-3. Strain OBD-3 exhibited wide adaptability and degradability over a wide range of temperatures (15-37 °C), pH (6.0-9.0), and salinities (1-7% NaCl) to degrade 60.6-86.6% of PHs. Under extreme conditions (15 °C and 3-7% salinity), PHs were degraded by 60.6 ± 8.2% and more than 82.1% respectively. In OBD-3, the alkane monooxygenase genes alkB1 and alkB2 (GenBank accession numbers: MZ688386 and MZ688387) were found, which belonged to Rhodococcus by sequence alignment. Moreover, strain OBD-3 was used in lab scale remediation in which the contaminated soil with OBD-3 was isolated as the remediation object. The PHs were removed at 2,809 ± 597 mg/kg within 2 months, and the relative abundances of Sphingobium and Pseudomonas in soil increased more than fivefold. This study not only established a system for the isolation and identification of indigenous degrading strains that could efficiently degrade pollutants in the isolated environment but also enabled the isolated degrading strains to have potential application prospects in the in situ bioremediation of PHs-contaminated soils.

Asunto(s)

RESUMEN

The complex pollution of aquifers by reduced and oxidized nitrogen compounds is currently considered one of the urgent environmental problems that require non-standard solutions. This work was a laboratory-scale trial to show the feasibility of using various mineral carriers to create a permeable in situ barrier in cold (10 °C) aquifers with extremely high nitrogen pollution and inhabited by the Candidatus Scalindua-dominated indigenous anammox community. It has been established that for the removal of ammonium and nitrite in situ due to the predominant contribution of the anammox process, quartz, kaolin clays of the Kantatsky and Kamalinsky deposits, bentonite clay of the Berezovsky deposit, and zeolite of the Kholinsky deposit can be used as components of the permeable barrier. Biofouling of natural loams from a contaminated aquifer can also occur under favorable conditions. It has been suggested that the anammox activity is determined by a number of factors, including the presence of the essential trace elements in the carrier and the surface morphology. However, one of the most important factors is competition with other microbial groups that can develop on the surface of the carrier at a faster rate. For this reason, carriers with a high specific surface area and containing the necessary microelements were overgrown with the most rapidly growing microorganisms. Bioaugmentation with a "warm" anammox community from a laboratory reactor dominated by Ca. Kuenenia improved nitrogen removal rates and biofilm formation on most of the mineral carriers, including bentonite clay of the Dinozavrovoye deposit, as well as loamy rock and zeolite-containing tripoli, in addition to carriers that perform best with the indigenous anammox community. The feasibility of coupled partial denitrification-anammox and the adaptation of a "warm" anammox community to low temperatures and hazardous components contained in polluted groundwater prior to bioaugmentation should be the scope of future research to enhance the anammox process in cold, nitrate-rich aquifers.

RESUMEN

Microbial application is an efficient, economical, and ecofriendly method for remediating black-odorous rivers. In this study, the field treatment effect and microbial community changes were monitored during remediation by the acclimated complex microorganisms of a typical black-odorous stream. After the treatment, the total phosphorus and ammonia contents decreased by 74.0% and 76.3% and the concentrations of dissolved oxygen increased from 1.65 to 4.90 mg/L, indicating the effectiveness of the acclimated composite microorganisms. The proportion of Bacteroidetes decreased significantly by 48.1% and that of Firmicutes increased by 2.23% on average, and the microbial diversity index first increased and then tended to be uniform. Redundancy analysis demonstrated that the pH, dissolved oxygen, and oxidation-reduction potential together determined the composition of the microbial communities (p < 0.05). These findings showed that the acclimated composite microorganisms can effectively remediate the black odor.

Asunto(s)

RESUMEN

Knowledge of the geology and hydrogeology of the polluted site emblematize a key requirement for environmental remediation, through assembling and synthesizing findings from various sources of physical evidence. In an increasingly virtual era, digital and geo-referenced metadata may serve as tools for collecting, merging, matching, and understanding multi-source information. The main goal of this paper is to emphasize the significance of a 3D hydrogeochemical model to the portrayal and the understanding of contamination dynamics and decontamination mechanisms at a highly contaminated industrial site. Some remediation measures are active on-site, due to the evidence-based presence of chlorinated solvents in groundwater. These are attributable to a slow-release source of pollutants in the saturated zone associated with very low permeability sediments. Therefore, in this research, a new technique for the remediation of secondary sources of dense non-aqueous phase liquid (DNAPL) contamination was investigated for the first time on a full-scale application. The combination of groundwater circulation wells (IEG-GCW®) and a continuous electron donor production device was set up to boost in situ bioremediation (ISB). A multi-phase approach was followed handling and releasing data during various remediation stages, from site characterization via pilot testing to full-scale remediation, thus allowing users to monitor, analyze, and manipulate information in 3D space-time. Multi-source and multi-temporal scenarios reveal the impact of ongoing hydraulic dynamics and depict the decontamination mechanisms in response to the interventions implemented over time, by quantifying the overall performance of the adopted strategies in terms of removal of secondary sources of pollution still active at the site.

Asunto(s)

RESUMEN

Organohalide-respiring bacteria (OHRB) remove halogens from a variety of organohalides, which have been utilized for in situ remediation of different contaminated sites, e.g., groundwater, sediment and soil. Nonetheless, dehalogenation activities of OHRB and consequent remediation efficiencies can be synergistically affected by water content, soil type and inoculated/indigenous OHRB, which need to be disentangled to identify the key driving parameter and to elucidate the underlying mechanism. In this study, we investigated the impacts of water content (0-100%), soil type (laterite, brown soil and black soil) and inoculated OHRB (Dehalococcoides mccartyi CG1 and a river sediment culture) on reductive dechlorination of perchloroethene (PCE) and polychlorinated biphenyls (PCBs), as well as on associated microbial communities. Results suggested that the water content as a primary rate-limiting parameter governed dechlorination activities in environmental matrices, particularly in the soil, possibly through mediation of cell-to-organohalide mobility of OHRB. By contrast, interestingly, organohalide-dechlorinating microbial communities were predominantly clustered based on soil types, rather than water contents or inoculated OHRB. This study provided knowledge on the impacts of major parameters on OHRB-mediated reductive dechlorination in groundwater, sediment and soil for future optimization of in situ bioremediation of organohalides.

Asunto(s)

RESUMEN

In this work, the effect of In-Situ Chemical Oxidation (ISCO) using peroxydisulfate (PDS) on chloroethenes-degrading microbial consortium in the presence of perchloroethene (PCE; tetrachloroethene) was investigated. Degradation of PCE was examined using PDS without an activation, activated with iron Fe(II) chelated by citric acid (CA), and microbial consortium derived from chloroethenes-contaminated site in liquid and sand microcosms. Two different molar ratios of PCE/PDS/(Fe(II)+CA) (1/8/1.6 and 1/16/3.2) were tested. The PCE removal efficiency was the highest in the bacteria-free microcosms. An expected increase in the PCE removal efficiency by coupling PDS and microbial consortium was not confirmed. Surprisingly, the reduced capacity of PDS to remove PCE in the systems containing both PDS and microbial consortium was observed indicating that indigenous microbes may reduce the efficiency of PDS during a remediation. High-throughput 16S rRNA gene sequencing analysis revealed negative effect of PDS on organohalide-respiring bacteria (OHRB), which were not detected after 19 days of the experiment, unlike in biotic control. On the other hand, amplicon sequence variants (ASVs) affiliated with genera Brevundimonas and Pseudomonas that have been described for their capability of aerobic cometabolic/metabolic degradation of chloroethenes (CEs) were among the most frequently detected ASVs after the PDS treatment. Results further showed that the sole Fe(II)-CA affected the diversity of the microbial consortium. Overall, results of this study provide new insight into the coupling ISCO using PDS with in situ bioremediation of CEs.

Asunto(s)

RESUMEN

A field pilot-scale passive treatment system was developed for in-situ bioremediation of acid mine drainage (AMD). The microbial community and its variation were analyzed. The data proved that 93.7% of total soluble Fe and 99% of soluble Fe(II) could be removed by the system. Principal coordinates analysis (PCoA) showed that a low pH and an elevated Fe concentration within the system created a unique microbial community that was dominated by acidophilic iron-oxidizing bacteria and iron-reducing bacteria. Canonical correlation analysis (CCA) indicated that the pH, iron content and total sulfur jointly determined the composition of the microbial communities. Species of Ferrovum, Delftia, Acinetobacter, Metallibacterium, Acidibacter and Acidiphilium were highly enriched, which promoted the removal of iron. Furthermore, the results revealed important data for the biogeochemical coupling of microbial communities and environmental parameters. These findings are beneficial for further application of in-situ field bioreactors to remediate AMD.

Asunto(s)

RESUMEN

Microbial communities in subterranean estuaries play important roles in the biogeochemical cycle. However, the microorganisms associated with biogeochemical behaviors in subterranean estuaries have received little attention. Here, the bacterial communities were compared between the fresh and saline groundwater in a subterranean estuary. Correlation analysis between bacterial groups and salinity indicated that different species represented different groundwater types. The key bacterial groups found along the subterranean estuaries have been shown to influence organic pollutant degradation and nitrate utilization. These species may be potential candidates for the in situ bioremediation of subterranean estuaries that are contaminated with pollutants. The utilization of nitrate and organic pollutants by bacteria in subterranean estuaries serves as a nitrate sink and inorganic carbon source. Our results show the role of bacteria in remediating pollutants through submarine groundwater discharge (SGD) to the coastal ocean, and specific species may be helpful in selecting reasonable groundwater end-members and reducing SGD uncertainties.

Asunto(s)

RESUMEN

During in situ bioremediation, continuous injection of growth substrates such as carbon sources, electron donors, or electron acceptors inevitably results in microbial growth, resulting in biological clogging in an aquifer. Therefore, for successful bioremediation, development of a new injection method is needed to reduce or alleviate this clogging problem. In this study, we carried out field tracer tests using single-well push-pull tests (SWPPTs), single-well natural gradient drift tests (SWNGDTs), and long-term in situ well-to-well tests to develop and evaluate a new method of liquid/gas mixture spray injection. The effectiveness of the new method was evaluated by estimating the factors as follow: longitudinal dispersivity (αL), radius of influence (RI), shear stress on the surface of aquifer particles (σ), biofilm-shear-loss rate (Rs), and the ratio of volume occupied by cells grown to the original pore volume. At the tested site, the liquid/gas mixture spray injection method turned out to have several advantages compared to the traditional solution injection method: 1) transport of solute to a larger proportion of an aquifer by a factor of 1.3-1.7, 2) application of higher shear stress onto the surface of soil particles by a factor of 4.2-5.0, 3) faster biofilm sloughing rates by a factor of 2.3-2.6, 4) reduction in the ratio of the volume occupied by microorganisms to total pore volume (Volmicrobes/Volpore), and 5) efficient trichloroethylene (TCE) dechlorination for a period of 550 days without any injection problems. This new injection method showed positive effects on the hydrogeological and physical characteristics of the system, thus alleviating the biological clogging problem.

Asunto(s)

RESUMEN

Surfactant solutions have been frequently studied for soil remediation. However, since they are expensive, massive consumption of surfactant solution can constrain their application. Surfactant microbubbles, or colloidal gas aphrons (CGAs), can serve as cost effective alternatives of surfactant solution because the use of CGAs reduce the amount of surfactant consumption. Moreover, CGAs can also improve the contact with the contaminated environment due to their unique surface properties, e.g. containing 40-70% of gas, small size, large interfacial areas, water-like flow properties and buoyant rise velocities. In this review paper, the properties and flow character of CGAs in soil matrix reviewed due to their relevance to soil remediation process. A comprehensive overview of the application of CGAs in flushing off organic pollutants and heavy metals, and carrying oxygen, bacteria and dissolved materials for soil remediation were provided. This paper also highlighted the limitation of CGAs application and important future research scopes.

Asunto(s)